Explore our ArmorWall Solutions:ArmorWall NCArmorWall VP ArmorWall NP ArmorWall PBArmorWall BG

- Non-Coated- Vapor Permeable- Non-Permeable- Portland cement Board- Below-Grade

TM

Water Control Layer

Air Control Layer

Thermal Control Layer

Panelized Construction

Mold and Mildew Resistant

NFPA 285 Approved

Environmentally Safe

Insect Resisant

Structural SheathingContractor Friendly

Designer Friendly

Fusion Technology

ArmorWall is ideal for handling the stress of factory-built wall assembly manufacturing process, including movement within the facility, deflection during transportation, and racking during wall erection. Self-adhered membranes have tremendous adhesion to the ArmorWall surface.

Allows the designer the freedom to create and innovate design without passing along the associated headaches to the contractor. No longer requiring the exterior finish to go back to the stud provides an un-restrictive and un-interrupted blank canvas.

Fully passed the NFPA 285 on its own without a required cladding on the front. This allows most UL tested, listed, and approved exterior finishes to qualify as part of the complete wall assembly.

When properly sealed using ArmorSeal™ Sealant application at all seams and fasteners, the factory coated panels meet the IBC requirements for an air barrier assembly without the need for additional materials.

Seemingly complex designs are simplified when using the ArmorWall solution. Panelized construction and the conveniently stenciled fastening pattern on each panel make installation faster. Most variations allow for both horizontal and vertical installation of the panel and its manipulation can be done using standard job-site tools.

Thanks to the fusion technology and the elements of which ArmorWall is comprised the structural strength of the panel allows direct attachment for cladding to the panel without the requirement of pin-pointing the studs.

No paper facings exist within the assembly to promote any biological growth.

Each panel is manufactured using patented fusion technology bestowing unique properties to ArmorWall. Lamination not being party to the process allows a smooth foam backing.

The insulating layer of high density foam insulation is fused to the structural sheathing element which provides ease of use when conforming to the continuous insulation requirements in evolving building codes. The thermal layer is offered in a few standard thicknesses to meet the project required R-Values.

Tunnel boring insects will not penetrate into the fused insulation due to inhibitors included within the chemistry and other insects simply do not like Armorwall.

Armorwall passes the tests as a weather resistive barrier for pressure totaling two hours. Once the fasteners and seams have been sealed the structure is considered dried-in and interior construction may commence.

Production process uses green measures and materials from other manufacturing to produce a product that is recyclable with less embodied energy. Panelized construction and availability for horizontal and vertical installation produces less panel waste.

ArmorWall interior/exterior wall sheathing is a UL Classified and tested, high strength, fire resistant exterior insulated wall sheathing product, commonly referred to as an SIS (structural insulated sheathing) panel. Combining the best traits of Magnesium Oxide (MgO), portland cement board, and polyurethane insulation, MaxLife’s technology fuses a structural element to the exterior face of our fused insulation layer which modernizes the installation of commercial and residential wall assemblies. This innovation allows the designer to re-implement legacy design or frees them to wider creativity while maintaining wall construction speed, efficiency, and code compliance. Through rigorous testing and using many common finish elements in the industry including Stucco, Metal Wall Panels, Brick, and the like, MaxLife is able to bridge the gap commonly found in keeping with continuous insulation (ci) compliance.

ARMORWALL STRUCTURAL INSULATED SHEATHING™SERIES BY MAXLIFE INDUSTRIES

ArmorWall NFPA 285 30 minute burn at over 1000°F

ArmorWall NFPA 285 passing test result

BOARD SIZING AND INSULATING FACTORS

Board Coverage Total BoardThickness

SheathingThickness

InsulationThickness R-Value Weight SKU#

48"x96" (32sqft/sheet) 2" 1/2" 1 1/2" R10 89 lbs ANC20009648"x120" (40sqft/sheet) 2" 1/2" 1 1/2" R10 112 lbs ANC20012048"x96" (32sqft/sheet) 2 3/4" 1/2" 2 1/4" R15 93 lbs ANC234096

48"x120" (40sqft/sheet) 2 3/4" 1/2" 2 1/4" R15 117 lbs ANC23412048"x96" (32sqft/sheet) 3 3/4" 1/2" 3 1/4" R21 99 lbs ANC334096

48"x120" (40sqft/sheet) 3 3/4" 1/2" 3 1/4" R21 125 lbs ANC334120*1

Average board weight may vary based upon environmental conditions.

*1

BOARD SIZING AND INSULATING FACTORS

Board Coverage Total BoardThickness

SheathingThickness

InsulationThickness R-Value Weight SKU#

48"x96" (32sqft/sheet) 2" 1/2" 1 1/2" R10 92 lbs AVP2009648"x120" (40sqft/sheet) 2" 1/2" 1 1/2" R10 115 lbs AVP20012048"x96" (32sqft/sheet) 2 3/4" 1/2" 2 1/4" R15 96 lbs AVP234096

48"x120" (40sqft/sheet) 2 3/4" 1/2" 2 1/4" R15 120 lbs AVP23412048"x96" (32sqft/sheet) 3 3/4" 1/2" 3 1/4" R21 103 lbs AVP334096

48"x120" (40sqft/sheet) 3 3/4" 1/2" 3 1/4" R21 129 lbs AVP334120*1

Average board weight may vary based upon environmental conditions.

*1

BOARD SIZING AND INSULATING FACTORS

Board Coverage Total BoardThickness

SheathingThickness

InsulationThickness R-Value Weight SKU#

48"x96" (32sqft/sheet) 2" 1/2" 1 1/2" R10 92 lbs ANP20009648"x120" (40sqft/sheet) 2" 1/2" 1 1/2" R10 115 lbs ANP20012048"x96" (32sqft/sheet) 2 3/4" 1/2" 2 1/4" R15 96 lbs ANP234096

48"x120" (40sqft/sheet) 2 3/4" 1/2" 2 1/4" R15 120 lbs ANP23412048"x96" (32sqft/sheet) 3 3/4" 1/2" 3 1/4" R21 103 lbs ANP334096

48"x120" (40sqft/sheet) 3 3/4" 1/2" 3 1/4" R21 129 lbs ANP334120*1

Average board weight may vary based upon environmental conditions.

*1

BOARD SIZING AND INSULATING FACTORS

Board Coverage Total BoardThickness

SheathingThickness

InsulationThickness R-Value Weight SKU#

48"x96" (32sqft/sheet) 2" 5/16" 1 11/16" R11 82 lbs APB20009648"x96" (32sqft/sheet) 2 3/4" 5/16" 2 7/16" R16 86 lbs APB23409648"x96" (32sqft/sheet) 3 3/4" 5/16" 3 7/16" R22.5 93 lbs APB334096

*1

Average board weight may vary based upon environmental conditions.

*1

Reverse Side of Panel

ArmorWall NC is our factory uncoated SIS panel. This panel requires an on site application of a compatible third party air/water membrane. ArmorWall NC is formulated for those projects that have difficult transitions and require a field applied WRB such as self-adhered, or in a panelized application where transportation and movement may cause sealants and coatings to break down.

ArmorWall VP is factory coated with our Vapor Permeable air/water membrane. This allows the wall to breathe and dry to the exterior of the wall assembly. As with all of the coated panels, sealing edge seams and fasteners makes the assembly dried-in permitting interior construction to commence soon than before.

ArmorWall NP is factory coated with our Non-Permeable air/water barrier. Installation is typical of cold-storage assemblies or natatoriums where moisture requires a greater control. MaxLife Industries is always ready to assist with detailing both common and uncommon situations on the project.

ArmorWall PB, unlike the other solutions, is comprised of a Portland cement Board sheathing. Its role in the project resides behind hard stucco or direct applied masonry on the exterior of our patented fusion technology utilizing the fire resistant and structural characteristics. Currently the only panel in the line with an integrated drainage plane on the back face of the insulation as the panel is installed over a third party AWB and traditional gypsum sheathing.

BOARD SIZING AND INSULATING FACTORS

Board Coverage Total BoardThickness

SheathingThickness

InsulationThickness R-Value Weight SKU#

48"x96" (32sqft/sheet) 2" 1/2" 1 1/2" R10 92 lbs ABG20009648"x120" (40sqft/sheet) 2" 1/2" 1 1/2" R10 115 lbs ABG20012048"x96" (32sqft/sheet) 2 3/4" 1/2" 2 1/4" R15 96 lbs ABG234096

48"x120" (40sqft/sheet) 2 3/4" 1/2" 2 1/4" R15 120 lbs ABG23412048"x96" (32sqft/sheet) 3 3/4" 1/2" 3 1/4" R21 103 lbs ABG334096

48"x120" (40sqft/sheet) 3 3/4" 1/2" 3 1/4" R21 129 lbs ABG334120*1

Average board weight may vary based upon environmental conditions.

*1

No cladding is exluded from the effectiveness and efficiencies of such

a robust system as ArmorWall

whether attached to Wood Stud,Metal Stud, Concrete, or CMU...

ArmorWall stands at the center to simplify

the assembly.

ArmorWall Return

ArmorWall Board

ArmorSeal VP

ArmorSeal NP

ArmorSeal Sealant

ArmorSeal Mesh Reinforcement

ArmorWall BG Trowel Flash

ArmorWall BG Trowel Reinforcement

ArmorWall BG Sealant

Explore our other ArmorWall System Components:

ArmorWall Screw

ArmorWall Attachment Screw

Company AddressWebsite AddressToll Free NumberCustomer Service Email

| 4995 South Main Street, Salisbury, North Carolina 28147| www.maxlifeindustries.com| 1-844-MAX4YOU (1-844-629-4968)| cs@maxlifeindustries.com

For specific inquiries regarding installation of ArmorWall please contact MaxLife Industries Customer Services.

ArmorWall BG is factory coated with a our approved below grade waterproofing. Although all ArmorWall panels are capable of being installed both vertically as well as horizontally, this panel is manufactured with the MgO sheathing capping both of the long dimension edges yielding to a horizontal installation. ArmorWall BG is designed to continue the continuous insulation(ci) below grade past the wall and foundation plane to allow for seamless transition ensuring compliance with the latest energy codes.

TM