non emc din-based vectorpaksubracks
TRANSCRIPT
38 www.vectorelect.com 800-423-5659Specification subject to change without notice
Front PanelsScrew-mounted front panel kits include handle and identification panel. Available in 3U, 6U and 9U heights and in three widths: 4HP (0.788”),8HP (1.588”) and 12HP (2.388”). All mounting hardware, including board mounting support bracket and hardware also included. Brushedaluminum panel with clear irridite plating matches standard finish for Vector packaging products.
Non EMC DIN-Based VectorPaktmSubracksN
on E
MC
Subr
acks
Type V, 3U Fixed Handle Style
3U X 4HP3U X 8HP3U X 12HP6U X 4HP6U X 8HP6U X 12HP9U X 4HP9U X 8HP9U X 12HP
5.06” 5.06” 5.06”10.31” 10.31” 10.31”15.56”15.56”15.56”
0.788”1.588” 2.388”0.788”1.588”2.388”0.788” 1.588”2.388”
FPE04-3UFPE08-3UFPE12-3UFPE04-6UFPE08-6UFPE12-6UFPE04-9UFPE08-9UFPE12-9U
N/A N/A N/A
5.25”5.25”5.25”5.25”5.25”5.25”
N/A N/A N/A
3.50”3.50”3.50”3.50”3.50”3.50”
Front Panels, Ejector Style, Type I, II
Front Panels, Fixed Handle Style, Type V
Part # DESCRIPTION A B DC
-Add suffix “B” to part # for panels without center brackets mounting, e.g. FPE04-6UB
3U X 4HP3U X 8HP3U X 12HP6U X 4HP6U X 8HP6U X 12HP9U X 4HP9U X 8HP9U X 12HP
5.06” 5.06” 5.06”10.31” 10.31” 10.31”15.56”15.56”15.56”
0.788”1.588” 2.388”0.788”1.588”2.388”0.788” 1.588”2.388”
FP04-3UFP08-3UFP12-3UFP04-6UFP08-6UFP12-6UFP04-9UFP08-9UFP12-9U
Part # DESCRIPTION A B
-Fixed Handle Style front panel kit includes upper and lower handles (lower only on 3U versions)that extend across the full width of the panel
CATALOG 128_CATALOG 128.qxd 4/24/2014 10:14 AM Page 38
Whether you need standard panels,modified, or custom front panels, wehave manufacturing capabilities tosupport your needs. VectorElectronics’s custom aluminum frontpanels offer a wide range of designopportunities. Cost effective punch-ing for volume production.
Customization :• Panel cutouts• Silkscreening• Powder coating• Special Finishing
39www.vectorelect.com 800-423-5659
Filler Panels/Blank-off PlatesFeatures
• Covers unused slots• Improves air flow• Mounting hardware
included
U
369
Part Number4HP
5231304-075261304-075291304-07
Part Number8HP
5231308-075261308-075291308-07
Part Number12HP
5231312-075261312-075291312-07
Typical slot width is 0.800” (4HP)Material: 6063T5, extrudedbrushed Aluminum with clearIrridite finish.
Each Filler Panel Kit Includes4,8 or 12HP panel (0.8”, 1.6” or 2.4”)M2.5 Nickel plated mounting screws with ‘captive’sleeves
Standard Filler Panels
95000002B
94300008
Captive sleeves/screwsare included with allVectorPaktm filler panelsand also sold separatelyin a hardware kit:
P/N HD99-1Includes QtyBlack plastic sleeve 48M2.5 x 11 mm,nickel 48plated steel screw
Non EMC DIN-Based VectorPaktmSubracksN
on EMC
Subracks
Custom Front Panels
CATALOG 128_CATALOG 128.qxd 4/25/2014 9:31 AM Page 39
Plastic Handle
ID Plate
M2.5 x 0.45Hex Nut
PC Board
M2.5 x 10Filister Head Screw
Retainer Sleeve
M2.5 x 11Captive Screw
M2.5 x 8 FlatHead Screw
'L' Brackets
M2.5 x 16Filister Head Screw
www.vectorelect.comPHONE : (818)985-8208 FAX : (818)985-7708
11115, VANOWEN STREET, NORTH HOLLYWOOD, CA-91605
3U-8HP
'L' Bracket Detail
Washer
Optional for 6U & 9UHigh Panel
VECTOR P/N# HD102
6U-8HP
.645
.170
.372
.340.277
.285
.454
.240
.600
.630
A
B2 x.123
2 x.123
2 x.294
2 x.294
Top Handleonly for 6U & 9U
.110 x .150OBROUND
4HP Handle
8HP Handle
12HP ID Plate
Shown 12HP Bottom Handle
Configuration
4 HP = .760
8 HP = 1.560
4HP + 8HP
(2.360)
IN349C
TOLERANCE : .XXX .010ALL DIMENSIONS ARE IN INCHES
12HP =
B
Ejector Knob
ID Plate
Captive Screw
Retainer Sleeve
'L' - BracketPC Board
Front Panel
IN399
0.075
0.1200.235
0.559
0.945
0.4650.563
0.174 THRU
R 0.170
0.150 RAD.
1.090
0.164
0.176
0.439
0.779
0.080
0.200 x 0.200 CUTOUT
0.427
0.325
0.509
0.166
0.159
0.222
0.2570.586
0.237
0.1700.311
Phone: (818) 985-8208 Fax: (818) 985-770811115 Vanowen Street, North Hollywood,CA 91605
FPE04-6U PANEL WILL HAVE TWO CENTER HOLES FOR OPTIONAL 3U 'L' BRACKETS.ORDER FPE04-6UB FOR PANEL WITHOUT THE CENTER HOLES.