non-linear blind source separation applied to ion-sensitive field effect transistor sensor arrays
DESCRIPTION
Non-linear Blind Source Separation Applied to Ion-sensitive Field Effect Transistor Sensor Arrays Guillermo Bedoya Advanced Hardware Architectures ( UPC ) Laboratoire des Images et des Signaux ( INPG ). UNIVERSITAT POLITÉCNICA DE CATALUNYA. UPC. INP Grenoble. Outline. Introduction - PowerPoint PPT PresentationTRANSCRIPT
![Page 1: Non-linear Blind Source Separation Applied to Ion-sensitive Field Effect Transistor Sensor Arrays](https://reader036.vdocument.in/reader036/viewer/2022081520/56815a95550346895dc8110e/html5/thumbnails/1.jpg)
Non-linear Blind Source Separation Non-linear Blind Source Separation Applied to Ion-sensitive Field Applied to Ion-sensitive Field
Effect Transistor Sensor ArraysEffect Transistor Sensor Arrays
Guillermo Bedoya
Advanced Hardware Architectures (UPC)
Laboratoire des Images et des Signaux (INPG)
UNIVERSITAT POLITÉCNICA DE CATALUNYA
UPC INPGrenoble
![Page 2: Non-linear Blind Source Separation Applied to Ion-sensitive Field Effect Transistor Sensor Arrays](https://reader036.vdocument.in/reader036/viewer/2022081520/56815a95550346895dc8110e/html5/thumbnails/2.jpg)
OutlineIntroduction
- Overview
- What is Blind Signal Separation (briefly)
Identifiability & Algorithmic solutions
-When can it be done
-How do we do it (briefly)
Applications to semiconductor-based sensor arrays
-The ISFET/CHEMFET devices
-How does BSS apply to semiconductor-based chemical sensing
![Page 3: Non-linear Blind Source Separation Applied to Ion-sensitive Field Effect Transistor Sensor Arrays](https://reader036.vdocument.in/reader036/viewer/2022081520/56815a95550346895dc8110e/html5/thumbnails/3.jpg)
OverviewPotential advantages of integrated circuit technology applied to the field of physiological data acquisition and water monitoring systems :
• small size
• reliability
• low cost & rapid time response
• multi sensor chip
• on chip signal processing
Our objective is to design a low cost/high performance smart sensor system for Biomedical and environmental monitoring applications, using ISFET/CHEMFET sensor arrays.
![Page 4: Non-linear Blind Source Separation Applied to Ion-sensitive Field Effect Transistor Sensor Arrays](https://reader036.vdocument.in/reader036/viewer/2022081520/56815a95550346895dc8110e/html5/thumbnails/4.jpg)
IntroductionBlind Source Separation deals with the « separation » of a mixture of sources, with a little prior information about the mixing process and the sources signals
..
....
SensorsSensors
S1
S2
SN
Sources
Environment
Source Separation Algorithm
W...
..
.x2
xN
x1 Ŝ 1
Ŝ2
ŜN
Observations
x = As Ŝ = Wx
![Page 5: Non-linear Blind Source Separation Applied to Ion-sensitive Field Effect Transistor Sensor Arrays](https://reader036.vdocument.in/reader036/viewer/2022081520/56815a95550346895dc8110e/html5/thumbnails/5.jpg)
What is Blind Source Separation
x1[n]=a11s1[n]+…+a1psp[n]..
xm[n]=am1s1[n]+…+ampsp[n]
x[n]=(x1[n]…xm[n])=As[n]
y[n]=(y1[n]…ym[n])=Wx[n]=s[n]
s x yA W
![Page 6: Non-linear Blind Source Separation Applied to Ion-sensitive Field Effect Transistor Sensor Arrays](https://reader036.vdocument.in/reader036/viewer/2022081520/56815a95550346895dc8110e/html5/thumbnails/6.jpg)
Identifiability & Algorithmic solutionsPrinciples of information theory can be applied to the BSS problem.
We suppose that source signals are independents (realistic assumption).
Then, we minimize a measure of the independence (e.g., the mutual
information (MI) I(.)) of the outputs I(y), where y=Wx.
s x= As y= Wx
![Page 7: Non-linear Blind Source Separation Applied to Ion-sensitive Field Effect Transistor Sensor Arrays](https://reader036.vdocument.in/reader036/viewer/2022081520/56815a95550346895dc8110e/html5/thumbnails/7.jpg)
How do we do it?
We consider a processing function g, which operates on a scalar X using a function Y=g(X;w) in order to maximize the MI between X and Y. Parameter w is chosen to maximize I(X;Y).
I(X;Y)=H(Y) – H(Y|X)
The MI is maximized when H(Y) is maximized (for g deterministic).
H(y)=sum[H(yi)] - I(y1,…, yN)
In order to maximize H(y) (we can maximize each H(yi) or minimize I(y1,…, yN)). g must be the CDF of x.
The mutual information is minimized when all the outputs are independent !
W g(x,W)x y
![Page 8: Non-linear Blind Source Separation Applied to Ion-sensitive Field Effect Transistor Sensor Arrays](https://reader036.vdocument.in/reader036/viewer/2022081520/56815a95550346895dc8110e/html5/thumbnails/8.jpg)
How do we do it?
An adaptive scheme is to take: Δw α
Δw = ;∂ (ln |∂y/∂x|) ∂w
1w
then,Δw α + x(1-2y)
Assuming a particular functional form:
y = g(x) = 1/(1+e-(wx))
∂y/∂x = wy (1-y)
∂H(y)
∂w
And we have a weight update rule :
w[k+1]=w[k]+ stepsize Δw
![Page 9: Non-linear Blind Source Separation Applied to Ion-sensitive Field Effect Transistor Sensor Arrays](https://reader036.vdocument.in/reader036/viewer/2022081520/56815a95550346895dc8110e/html5/thumbnails/9.jpg)
Applications to semiconductor-based sensor arrays
Ion-Sensitive Field Effect Transistors (ISFETS and CHEMFETs) are basically metal oxide semiconductor field-effect devices. The construction of an ISFET differs from the conventional MOSFET devices, in that the gate metal is omitted and replaced by a
membrane sensitive to the ions of interest.
Potentiometric sensors!
![Page 10: Non-linear Blind Source Separation Applied to Ion-sensitive Field Effect Transistor Sensor Arrays](https://reader036.vdocument.in/reader036/viewer/2022081520/56815a95550346895dc8110e/html5/thumbnails/10.jpg)
ISFET/CHEMFET sensors
S D
(1) Reference Electrode (Vref)
(2) Solution (Electrolyte)
(3) Membrane (MOSFET gate
metal)
(4) Gate Insulator
VG VD
ID
Silicon Substrate
![Page 11: Non-linear Blind Source Separation Applied to Ion-sensitive Field Effect Transistor Sensor Arrays](https://reader036.vdocument.in/reader036/viewer/2022081520/56815a95550346895dc8110e/html5/thumbnails/11.jpg)
ISFET/CHEMFET sensors (Short view)
ID for the conventional MOSFET is:
ID = α[(VG –VT)-0.5VD]VD (1)
where α = μCoW VD/L
We have to establish new expressions for VG and VT to adapt equ. (1) to the ISFET.
MOSFET VG ground-to-gate metal potential
ISFET VG* ground-to-membrane potential
VG* = VG + (Electrode-electrolyte potential)+ Nernst Potential
![Page 12: Non-linear Blind Source Separation Applied to Ion-sensitive Field Effect Transistor Sensor Arrays](https://reader036.vdocument.in/reader036/viewer/2022081520/56815a95550346895dc8110e/html5/thumbnails/12.jpg)
ISFET/CHEMFET sensors (Short view)
VT = Φms + 2 ΦF - Qss+QB
Co
VT*= Φcs + 2 ΦF - +Eref – E0 Qss+QB
Co
VG* = Vref + RT ln (ai + Kij aj )
nF
zi/zj
ID* = α[(VG* –VT*)-0.5VD]VD (2)
![Page 13: Non-linear Blind Source Separation Applied to Ion-sensitive Field Effect Transistor Sensor Arrays](https://reader036.vdocument.in/reader036/viewer/2022081520/56815a95550346895dc8110e/html5/thumbnails/13.jpg)
Main characteristics
Sensitivity:
• Lowest level of chemical concentration that can be detected.
• The smallest increment of concentration that can be detected in
the sensing environment.
Selectivity:
• The sensor’s ability to detect what is of interest and to separate that from interferents
![Page 14: Non-linear Blind Source Separation Applied to Ion-sensitive Field Effect Transistor Sensor Arrays](https://reader036.vdocument.in/reader036/viewer/2022081520/56815a95550346895dc8110e/html5/thumbnails/14.jpg)
Comparison of Chemical sensors
The use of different type of sensors is recomended to obtain more robust semiconductor-based chemical sensor arrays
![Page 15: Non-linear Blind Source Separation Applied to Ion-sensitive Field Effect Transistor Sensor Arrays](https://reader036.vdocument.in/reader036/viewer/2022081520/56815a95550346895dc8110e/html5/thumbnails/15.jpg)
Current problems
Miniaturized chemical sensors have yet to achieve their full potential.
They must accomodate:
• High noise levels in chemical composition of the field environment.
• Highly variable environmental conditions (temperature, humidity)
![Page 16: Non-linear Blind Source Separation Applied to Ion-sensitive Field Effect Transistor Sensor Arrays](https://reader036.vdocument.in/reader036/viewer/2022081520/56815a95550346895dc8110e/html5/thumbnails/16.jpg)
Solutions:
1. Classical methods :
• calibration (LUTs, polygonal interpolation, progressive calibration)
• compensation (Structural, adjust, etc)
2. ISFET SOURCE SEPARATION techniques
Advantages:
• Cancel crosstalk (added noise caused by interferent ions
• Cancel cross-sensitivity (when the response varies with the temperature – drift).
• Low cost/high performance implementation
Sensor fabricationSensor fabrication Application of signal processing techniquesApplication of signal processing techniques
• New materials.
• New devices.
.
.
High cost !
![Page 17: Non-linear Blind Source Separation Applied to Ion-sensitive Field Effect Transistor Sensor Arrays](https://reader036.vdocument.in/reader036/viewer/2022081520/56815a95550346895dc8110e/html5/thumbnails/17.jpg)
How does BSS apply to semiconductor-based chemical sensing?
ID1* = α[(Vref + RT ln (ai + K1 aj ) - VT*)- 0.5VD]
nF
zi/zj
We have the observations matrix:
ID2* = α[(Vref + RT ln (ai + K2 aj ) - VT*)- 0.5VD]
nF
zi/zj
IDN* = α[(Vref + RT ln (ai + KN aj ) - VT*)- 0.5VD]
nF
zi/zj
Non-linear BSS
Spatial diversity
![Page 18: Non-linear Blind Source Separation Applied to Ion-sensitive Field Effect Transistor Sensor Arrays](https://reader036.vdocument.in/reader036/viewer/2022081520/56815a95550346895dc8110e/html5/thumbnails/18.jpg)
Adaptive algorithm for Non-Linear BSS
Linear mixing stage
Non –linear distortion
Non –linear compensation
Linear de-mixing stage
A W
f1
f2
g1
g2
ai
aj
âi
âj
ID1
ID2
gID1
gID2
ID = Φa + Φb*ln(ai + Kijaj ) ;zi/zj
gID = e(ID –Φa)/ Φb
![Page 19: Non-linear Blind Source Separation Applied to Ion-sensitive Field Effect Transistor Sensor Arrays](https://reader036.vdocument.in/reader036/viewer/2022081520/56815a95550346895dc8110e/html5/thumbnails/19.jpg)
Adaptive algorithm for Non-Linear BSS
1. Initialization W = I, gID = ID, Φa and Φb.
2. Loop
1. Compute outputs by: y =Wx;
2. Estimation of parameters
Φa[k+1]= Φa[k]+ stepsize ΔΦa
Φb[k+1]= Φb[k]+ stepsize ΔΦb
3. Normalization
4. Linear BSS algorithm: w[k+1]=w[k]+ stepsize Δw
5. Repeat until convergence
![Page 20: Non-linear Blind Source Separation Applied to Ion-sensitive Field Effect Transistor Sensor Arrays](https://reader036.vdocument.in/reader036/viewer/2022081520/56815a95550346895dc8110e/html5/thumbnails/20.jpg)
Preliminary Results• The algorithm recovers the wave forms of the main ion activity (ai) and the interferent ion activity (aj). aj is considered as noise in other approaches. Selectivity is improved.
• The algorithm works well for sensor arrays with poor selectivity coefficients. Sensor arrays with poor performance bring to the algorithm spatial diversity and more statistical information. We can use low cost sensors.
• The adaptive scheme allows the separation when environment characteristics varies (e.g., temperature). We hope to study the algorithm behaviour as a function of the device drift.
• The scheme can be adjusted to build a multi-parametric system, adding more sensors (sensitive to other ions) and adjusting the algorithm parameters.
• Hardware implementation using a DSP card is currently being developed. Previous implementations had shown good performance.
![Page 21: Non-linear Blind Source Separation Applied to Ion-sensitive Field Effect Transistor Sensor Arrays](https://reader036.vdocument.in/reader036/viewer/2022081520/56815a95550346895dc8110e/html5/thumbnails/21.jpg)
Non-linear Blind Source Separation Non-linear Blind Source Separation Applied to Ion-sensitive Field Applied to Ion-sensitive Field
Effect Transistor Sensor ArraysEffect Transistor Sensor Arrays
UNIVERSITAT POLITÉCNICA DE CATALUNYA
UPC INPGrenoble