norm iso 8655 and gilson speci cations - pretech instruments · gilson strictly applies the...

Norm ISO 8655 and Gilson Specifications EN

32 NORM ISO 8655 AND GILSON SPECIFICATIONS | THE MAXIMUM ERRORS TOLERATED TABLE OF CONTENTS | NORM ISO 8655 AND GILSON SPECIFICATIONS

INT

RO

DU

CT

ION

TAB

LE O

F C

ON

TE

NTS

TABLE OF CONTENTS

INTRODUCTION | 3

THE MAXIMUM ERRORS TOLERATED | 4

PIPETMAN® L and PIPETMAN® G | 4

PIPETMAN® L Multi | 5

PIPETMAN® L Fixed | 5

PIPETMAN Classic™ and PIPETMAN Neo® | 6

PIPETMAN® Fixed | 7

PIPETMAN® M | 8

PIPETMAN® M Multi | 8

PLATEMASTER® | 9

MICROMAN® E and MICROMAN® | 9

REPETMAN® | 10

DISTRIMAN® | 11

DISPENSMAN® | 11

1 INTRODUCTION

Some clarification must be made concerning the position of Gilson according to the maximum errors tolerated by ISO 8655. Numerous people have questioned themselves as to which set of tolerances to apply, ISO 8655 gives the technical specifications that must be respected by a pipette at the level of the nominal volume only, whereas Gilson gives tolerances fitted to all volumes. For its pipettes, Gilson has specifications much more severe than the norm, in order to guarantee optimum performance from your precision instrument.

The Performance of Your Pipette is Defined for Both the Nominal and Minimum VolumesGilson strictly applies the methodology imposed by the norm but has different specifications as a function of the selected volume, for a given model, contrary to the norm which specifies the same error, whatever volume is selected.

The norm is the result of a compromise reached by the members of the ISO technical committee. Gilson transmitted its reservations concerning the maximum tolerated errors and considered that the maximum tolerated errors were not strict enough to guarantee the performance levels required by these precision instruments. especially for applications in the domains of research. diagnostics. and quality control. It is for this reason that a note was added to paragraph 7.4 of the final version of the norm ISO 8655-2, so that everyone will take this point into consideration:

“It is recognized that the errors of measurement of intermediate volumes in the useful volume range of a variable—volume piston pipette may be considerably better than those specified for the nominal volume of the piston pipette.”

Example

PIPETMAN Classic™ P1000 has a systematic error of 3 µL at its minimum volume and 8 µL at its maximum volume. ISO 8655 specifies a systematic error of 8 µL for a 1000 µL pipette regardless of the selected volume.

It means that if your pipette delivers 506 µL instead of 500 µL, the pipette will be considered conforming according to the ISO 8655-2 standard, but not conforming according to Gilson specifications.

To illustrate the above proposition we have included a graph showing the comparison between the maximum errors tolerated by Gilson and ISO 8655.

Thus, a pipette may be judged to conform to the norm ISO 8655, but not to conform to Gilson Specifications. Therefore, we are not able to guarantee that a pipette performs in accordance with the tolerances given in ISO 8655 and by extension the coherence of our client’s experimental results. As a consequence we strongly recommend to have PIPETMAN® L, PIPETMAN® G, PIPETMAN® L Multi, PIPETMAN® L Fixed, PIPETMAN Classic™, PIPETMAN Neo®, PIPETMAN® Fixed, PIPETMAN® M, PIPETMAN® M Multi, PLATEMASTER®, MICROMAN® E, MICROMAN®, REPETMAN®, DISTRIMAN®, and DISPENSMAN® adjusted according to Gilson Specifications.

You will find in this document, tables comparing Gilson Specifications with ISO 8655, so that you can take into account the loss of performance of your pipette if you estimate that you only need conformity with the norm ISO 8655.

Contact your Gilson representative if you require any additional explanation regarding this matter.

Maximum Permissible Errors:Comparison ISO 8655 and Gilson

-10

-8

-6

-4

-2

0

2

4

6

8

10

200 μL 500 μL 1000 μL

Selected Volume

erro

r (μL

)

GilsonISO 8655

Figure 1Maximum Permissible Errors : Comparison ISO 8655 and Gilson

54 NORM ISO 8655 AND GILSON SPECIFICATIONS | THE MAXIMUM ERRORS TOLERATED THE MAXIMUM ERRORS TOLERATED | NORM ISO 8655 AND GILSON SPECIFICATIONS

TH

E M

AX

IMU

M E

RR

OR

S TOLE

RA

TE

D T

HE

MA

XIM

UM

ER

RO

RS

TOLE

RA

TE

D PIPETMAN L MULTICHANNEL MODELS

MODEL (PART NUMBER)

VOLUME (µL)

GILSON ISO-8655 MAXIMUM PERMISSIBLE ERROR

SYSTEMATIC ERROR (µL)

RANDOM ERROR (µL)


RANDOM ERROR (µL)

P8x10L (FA10013) P12x10L (FA10014)

Min. 0.5 ± 0.08 ≤ 0.04 ± 0.24 ≤ 0.16

1 ± 0.08 ≤ 0.05 ± 0.24 ≤ 0.16

5 ± 0.20 ≤ 0.10 ± 0.24 ≤ 0.16

Max. 10 ± 0.20 ≤ 0.10 ± 0.24 ≤ 0.16

P8x20L (FA10009) P12x20L (FA10010)

Min. 2 ± 0.10 ≤ 0.08 ± 0.4 ≤ 0.20

10 ± 0.20 ≤ 0.10 ± 0.4 ≤ 0.20

Max. 20 ± 0.40 ≤ 0.20 ± 0.4 ≤ 0.20

P8x200L (FA10011) P12x200L (FA10012)

Min. 20 ± 0.50 ≤ 0.25 ± 3.2 ≤ 1.2

100 ± 1.00 ≤ 0.40 ± 3.2 ≤ 1.2

Max. 200 ± 2.00 ≤ 0.50 ± 3.2 ≤ 1.2

P8x300L (FA10015) P12x300L (FA10016)

Min. 20 ± 1.00 ≤ 0.25 ± 8.0 ≤ 3.0

30 ± 1.00 ≤ 0.35 ± 8.0 ≤ 3.0

150 ± 1.50 ≤ 0.60 ± 8.0 ≤ 3.0

Max. 300 ± 3.00 ≤ 1.00 ± 8.0 ≤ 3.0

PIPETMAN L FIXED VOLUME MODELS

MODEL (PART NUMBER) VOLUME (µL)

GILSON ISO-8655 MAXIMUM PERMISSIBLE ERROR


RANDOM ERROR (µL)


RANDOM ERROR (µL)

F1L (FA10017) 1 ± 0.02 ≤ 0.015 ± 0.05 ≤ 0.05

F2L (FA10018) 2 ± 0.05 ≤ 0.02 ± 0.08 ≤ 0.04

F5L (FA10019) 5 ± 0.05 ≤ 0.03 ± 0.13 ≤ 0.08

F10L (FA10020) 10 ± 0.06 ≤ 0.03 ± 0.12 ≤ 0.08

F20L (FA10021) 20 ± 0.10 ≤ 0.05 ± 0.20 ≤ 0.10

F25L (FA10022) 25 ± 0.20 ≤ 0.07 ± 0.50 ≤ 0.20

F50L (FA10023) 50 ± 0.35 ≤ 0.12 ± 0.50 ≤ 0.20

F100L (FA10024) 100 ± 0.55 ≤ 0.15 ± 0.80 ≤ 0.30

F200L (FA10025) 200 ± 1.20 ≤ 0.30 ± 1.60 ≤ 0.60

F250L (FA10026) 250 ± 1.5 ≤ 0.75 ± 4.00 ≤ 1.50

F300L (FA10027) 300 ± 2.4 ≤ 0.50 ± 4.00 ≤ 1.50

F400L (FA10028) 400 ± 2.4 ≤ 0.8 ± 4.00 ≤ 1.50

F500L (FA10029) 500 ± 3.0 ≤ 0.8 ± 4.00 ≤ 1.50

F1000L (FA10030) 1000 ± 5.0 ≤ 1.3 ± 8.00 ≤ 3.00

F5000L (FA10031) 5000 ± 20.0 ≤ 7.0 ± 40.00 ≤ 15.00

Chapter 1

1 THE MAXIMUM ERRORS TOLERATED

MODEL(PART NUMBER)

VOLUME(µL)

MAXIMUM PERMISSIBLE ERRORS

GILSON ISO 8655


RANDOM ERROR (µL)


RANDOM ERROR (µL)

P2L (FA10001P) (FA10001M) P2G (F144054P) (F144054M)

Min. 0.2 0.5 1Max. 2

± 0.024± 0.025± 0.027± 0.030

≤ 0.012≤ 0.012≤ 0.013≤ 0.014

± 0.08± 0.08± 0.08± 0.08

≤ 0.04≤ 0.04≤ 0.04≤ 0.04

P10L (FA10002P) (FA10002M) P10G (F144055P) (F144055M)

Min. 1 5Max. 10

± 0.025± 0.075± 0.100

≤ 0.012≤ 0.03≤ 0.040

± 0.12± 0.12± 0.12

≤ 0.08≤ 0.08≤ 0.08

P20L (FA10003P) (FA10003M) P20G (F144056P) (F144056M)

Min. 2 10Max. 20

± 0.10± 0.10± 0.20

≤ 0.03≤ 0.05≤ 0.06

± 0.20± 0.20± 0.20

≤ 0.10≤ 0.10≤ 0.10

P100L (FA10004P) (FA10004M) P100G (F144057P) (F144057M)

Min. 10 50Max. 100

± 0.35± 0.40± 0.80

≤ 0.10≤ 0.12≤ 0.15

± 0.80± 0.80± 0.80

≤ 0.30≤ 0.30≤ 0.30

P200L (FA10005P) (FA10005M) P200G (F144058P) (F144058M)

Min. 20 100Max. 200

± 0.50± 0.80± 1.60

≤ 0.20≤ 0.25≤ 0.30

± 1.60± 1.60± 1.60

≤ 0.60≤ 0.60≤ 0.60

P1000L (FA10006P) (FA10006M)P1000G (F144059P) (F144059M)

Min. 100 500Max. 1000

± 3.0± 4.0± 8.0

≤ 0.6≤ 1.0≤ 1.5

± 8.0 ± 8 .0± 8.0

≤ 3.0≤ 3.0≤ 3.0

P5000L (FA10007) P5000G (F144066)

Min. 500 2500Max. 5000

± 12± 15± 30

≤ 3≤ 5≤ 8

± 40± 40± 40

≤ 15≤ 15≤ 15

P10mLL (FA10008) P10mLG (F144067)

Min. 1000 5000Max. 10000

± 30± 40± 60

≤ 6≤ 10≤ 16

± 60± 60± 60

≤ 30≤ 30≤ 30

Only for PIPETMAN L

G


TH

E M

AX

IMU

M E

RR

OR

S TOLE

RA

TE

D T

HE

MA

XIM

UM

ER

RO

RS

TOLE

RA

TE

D

Only for PIPETMAN Classic. Only for PIPETMAN Neo.

MODEL(PART NUMBER)

VOLUME(µL)


GILSON ISO 8655


RANDOM ERROR (µL)


RANDOM ERROR (µL)

P2 (F144801) P2N (F144561)

Min. 0.2 0.5 1Max. 2

± 0.024± 0.025± 0.025± 0.030

≤ 0.012≤ 0.012≤ 0.012≤ 0.014

± 0.08± 0.08± 0.08± 0.08

≤ 0.04≤ 0.04≤ 0.04≤ 0.04

P10 (F144802) P10N (F144562)

Min. 1 5Max. 10

± 0.025± 0.075± 0.100

≤ 0.012≤ 0.030≤ 0.040

± 0.12± 0.12± 0.12

≤ 0.08≤ 0.08≤ 0.08

P20 (F123600) P20N (F144563)

Min. 2 5 10Max. 20

± 0.10± 0.10± 0.10± 0.20

≤ 0.030≤ 0.040≤ 0.050≤ 0.060

± 0.2± 0.2± 0.2± 0.2

≤ 0.1≤ 0.1≤ 0.1≤ 0.1

P8x20N (F14401) P12x20N (F14402)

Min. 2 10Max. 20

± 0.10± 0.20± 0.40

≤ 0.08≤ 0.10≤ 0.20

± 0.4± 0.4± 0.4

≤ 0.2≤ 0.2≤ 0.2

P100 (F123615) P100N (F144564)

Min. 10 20 50Max. 100

± 0.35± 0.35± 0.40± 0.80

≤ 0.10≤ 0.10≤ 0.12≤ 0.15

± 0.8± 0.8± 0.8± 0.8

≤ 0.3≤ 0.3≤ 0.3≤ 0.3

P200 (F123601) P200N (F144565)

Min. 20 50

100Max. 200

± 0.50± 0.50± 0.80± 1.60

≤ 0.20≤ 0.20≤ 0.25≤ 0.30

± 1.6± 1.6± 1.6± 1.6

≤ 0.6≤ 0.6≤ 0.6≤ 0.6

P8x200N (F14403) P12x200N (F14404)

Min. 20 100Max. 200

± 0.50± 1.00± 2.0

≤ 0.25≤ 0.40≤ 0.60

± 3.2± 3.2± 3.2

≤ 1.2≤ 1.2≤ 1.2

P1000 (F123602) P1000N (F144566)

Min. 100 200 500Max. 1000

± 3.0± 3.0± 4.0± 8.0

≤ 0.6≤ 0.6≤ 1.0≤ 1.5

± 8.0± 8.0± 8.0± 8.0

≤ 3.0≤ 3.0≤ 3.0≤ 3.0

P5000 (F123603)

Min. 1000 200Max. 5000

± 12± 12± 30

≤ 3≤ 5≤ 8

± 40± 40± 40

≤ 15≤ 15≤ 15

P10mL (F161201)

Min. 1 mL 2 mL 5 mLMax. 10 mL

± 30± 30± 40± 60

≤ 6≤ 6≤ 10≤ 16

± 60± 60± 60± 60

≤ 30≤ 30≤ 30≤ 30

CLASSIC NEO

MODEL(PART NUMBER)

VOLUME(µL)


GILSON ISO 8655


RANDOM ERROR (µL)


RANDOM ERROR (µL)

F2 (F123770) 2 ± 0.08 ≤ 0.03 ± 0.08 ≤ 0.04

F5 (F123771) 5 ± 0.10 ≤ 0.04 ± 0.125 ≤ 0.075

F10 (F123772) 10 ± 0.10 ≤ 0.05 ± 0.12 ≤ 0.08

F20 (F123604) 20 ± 0.20 ≤ 0.06 ± 0.2 ≤ 0.1

F25 (F123775) 25 ± 0.25 ≤ 0.07 ± 0.5 ≤ 0.2

F50 (F123778) 50 ± 0.40 ≤ 0.15 ± 0.5 ≤ 0.2

F100 (F123784) 100 ± 0.80 ≤ 0.25 ± 0.8 ≤ 0.3

F200 (F123605) 200 ± 1.60 ≤ 0.30 ± 1.6 ≤ 0.6

F250 (F123787) 250 ± 3.0 ≤ 0.75 ± 4.0 ≤ 1.5

F300 (F123788) 300 ± 3.5 ≤ 0.75 ± 4.0 ≤ 1.5

F400 (F123789) 400 ± 3.6 ≤ 0.8 ± 4.0 ≤ 1.5

F500 (F123790) 500 ± 4.0 ≤ 1.0 ± 4.0 ≤ 1.5

F1000 (F123606) 1000 ± 8.0 ≤ 1.3 ± 8.0 ≤ 3.0

F5000 (F123607) 5000 ± 30.0 ≤ 8.0 ± 40 ≤ 15.0

FIXED


TH

E M

AX

IMU

M E

RR

OR

S TOLE

RA

TE

D T

HE

MA

XIM

UM

ER

RO

RS

TOLE

RA

TE

D

MODEL(PART NUMBER)

VOLUME(µL)


GILSON ISO 8655


RANDOM ERROR (µL)


RANDOM ERROR (µL)

P10M (F81022)

Min. 0.5 1 5Max. 10

± 0.040± 0.025± 0.060± 0.080

≤ 0.013≤ 0.012≤ 0.020≤ 0.025

± 0.12± 0.12± 0.12± 0.12

≤ 0.08≤ 0.08≤ 0.08≤ 0.08

P20M (F81023)

Min. 2 10Max. 20

± 0.075± 0.100± 0.150

≤ 0.025≤ 0.035≤ 0.050

± 0.2± 0.2± 0.2

≤ 0.1≤ 0.1≤ 0.1

P100M (F81013)

Min. 5 10 50Max. 100

± 0.35± 0.30± 0.38± 0.40

≤ 0.10≤ 0.10≤ 0.12≤ 0.15

± 0.8± 0.8± 0.8± 0.8

≤ 0.3≤ 0.3≤ 0.3≤ 0.3

P200M (F81024)

Min. 20 100Max. 200

± 0.40± 0.80± 1.00

≤ 0.15≤ 0.22≤ 0.26

± 1.6± 1.6± 1.6

≤ 0.6≤ 0.6≤ 0.6

P300M (F81014)

Min. 20 30 150Max. 300

± 0.80± 0.70± 0.90± 1.05

≤ 0.16≤ 0.20≤ 0.23≤ 0.30

± 4.0± 4.0± 4.0± 4.0

≤ 1.5≤ 1.5≤ 1.5≤ 1.5

P1200M (F81015)

Min. 100 120 600Max. 1200

± 2.5± 2.4± 3.6± 6.0

≤ 0.4≤ 0.4≤ 0.8≤ 1.2

± 16± 16± 16± 16

≤ 6.0≤ 6.0≤ 6.0≤ 6.0

P5000M (F81016)

Min. 500 2500Max. 5000

± 10± 15± 25

≤ 2≤ 4≤ 7

± 40± 40± 40

≤ 15.0≤ 15.0≤ 15.0

P10mLM (F81017)

Min. 1000 5000Max. 1000

± 25± 30± 50

≤ 4≤ 8≤ 12

± 60± 60± 60

≤ 30.0≤ 30.0≤ 30.0

M

PIPETMAN M MULTICHANNEL MODELS

MODEL (PART NUMBER) VOLUME (µL)

GILSON ISO-8655


RANDOM ERROR (µL)


RANDOM ERROR (µL)

P8X10M (F81025) P12X10M (F81026)

Min. 0.5 1 5Max. 10

± 0.05± 0.04± 0.08± 0.1

≤ 0.02≤ 0.02≤ 0.04≤ 0.06

± 0.24± 0.24± 0.24± 0.24

≤ 0.16≤ 0.16≤ 0.16≤ 0.16

P8x20M (F81027) P12x20M (F81028)

Min. 1 2 10Max. 20

± 0.08± 0.09± 0.15± 0.25

≤ 0.05≤ 0.06≤ 0.10≤ 0.12

± 0.4± 0.4± 0.4± 0.4

≤ 0.2≤ 0.2≤ 0.2≤ 0.2

P8X100M (F81018) P12X100M (F81019)

Min. 10 50Max. 100

± 0.25± 0.50± 0.80

≤ 0.14≤ 0.20≤ 0.25

± 1.6± 1.6± 1.6

≤ 0.6≤ 0.6≤ 0.6

P8x200M (F81029) P12x200M (F81030)

Min. 20 100Max. 200

± 0.50± 1.00± 2.00

≤ 0.16≤ 0.30≤ 0.50

± 3.2± 3.2± 3.2

≤ 1.2≤ 1.2≤ 1.2

P8X300M (F81031) P12X300M (F81032)

Min. 10 30 150Max. 300

± 1.00± 1.00± 1.50± 2.40

≤ 0.18≤ 0.18≤ 0.375≤ 0.45

± 8.0± 8.0± 8.0± 8.0

≤ 3.0≤ 3.0≤ 3.0≤ 3.0

P8X1200M (F81020) P12X1200M (F81021)

Min. 50 120 600Max. 1200

± 4.0± 4.0± 6.0± 9.6

≤ 0.7≤ 0.7≤ 1.5≤ 1.8

± 32± 32± 32± 32

≤ 12≤ 12≤ 12≤ 12

MODEL (PART NUMBER)

VOLUME (µL)

GILSON ISO-8655


RANDOM ERROR (µL)


RANDOM ERROR (µL)

P20 (F110761)

Min. 1 10Max. 20

± 0.12± 0.12± 0.20

≤ 0.10≤ 0.10≤ 0.18

± 0.40± 0.40± 0.40

≤ 0.20≤ 0.20≤ 0.20

P220 (F110762)

Min. 2 5 20 100 200Max. 220

± 0.12± 0.25± 0.40± 1.00± 1.60± 1.80

≤ 0.15≤ 0.18≤ 0.30≤ 0.80≤ 0.80≤ 0.80

± 8.00± 8.00± 8.00± 8.00± 8.00± 8.00

≤ 3.00≤ 3.00≤ 3.00≤ 3.00≤ 3.00≤ 3.00

MODEL (PART NUMBER)

VOLUME(µL)


GILSON ISO 8655


RANDOM ERROR (µL)


RANDOM ERROR (µL)

M10 (F148501) and M10E (FD10001)

Min. 1 5Max. 10

± 0.09± 0.10± 0.15

≤ 0.03≤ 0.03≤ 0.06

± 0.2± 0.2± 0.2

≤ 0.1≤ 0.1≤ 0.1

M25 (F148502) and M25E (FD10002)

Min. 3 10 12.5Max. 25

± 0.25± 0.27± 0.28± 0.30

≤ 0.08≤ 0.08≤ 0.08≤ 0.10

± 0.7± 0.7± 0.7± 0.7

≤ 0.3≤ 0.3≤ 0.3≤ 0.3

M50 (F148503) and M50E (FD10003)

Min. 20 25Max. 50

± 0.34± 0.40± 0.70

≤ 0.20≤ 0.22≤ 0.30

± 0.7± 0.7± 0.7

≤ 0.3≤ 0.3≤ 0.3

M100 (F148504) and M100E (FD10004)

Min. 10 50Max. 100

± 0.50± 0.75± 1.00

≤ 0.20≤ 0.30≤ 0.40

± 1.5± 1.5± 1.5

≤ 0.6≤ 0.6≤ 0.6

M250 (F148505) and M250E (FD10005)

Min. 50 100 125Max. 250

± 1.50± 1.70± 1.83± 2.50

≤ 0.30≤ 0.30≤ 0.33≤ 0.50

± 6± 6± 6± 6

≤ 2.0≤ 2.0≤ 2.0≤ 2.0

M1000 (F148506) and M1000E (FD10006)

Min. 100 500Max. 1000

± 3.0± 5.0± 8.0

≤ 1.6≤ 2.5≤ 4.0

± 12± 12± 12

≤ 4.0≤ 4.0≤ 4.0

E


TH

E M

AX

IMU

M E

RR

OR

S TOLE

RA

TE

D T

HE

MA

XIM

UM

ER

RO

RS

TOLE

RA

TE

D

MODEL(REPET-TIPS PART NUMBER)

VOLUME (µL)


GILSON ISO 8655


RANDOM ERROR (µL)


RANDOM ERROR (µL)

100 µL Non-steril (F164510) Sterile (F164515)

Min. 1 10 50Max. 100

± 0.08± 0.16± 0.50± 1.00

≤ 0.12≤ 0.2≤ 0.5≤ 0.5

± 1± 1± 1± 1

≤ 1≤ 1≤ 1≤ 1

500 µL Non-steril (F164520) Sterile (F164525)

Min. 5 50 250Max. 500

± 0.25± 0.50± 2.25± 4.5

≤ 0.25≤ 0.5≤ 1.5≤ 1.5

± 5± 5± 5± 5

≤ 3≤ 3≤ 3≤ 3

1000 µL Non-steril (F164527) Steril (F164528)

Min. 10 100 500Max. 1000

± 0.5± 1.0± 4.5± 6.0

≤ 0.4≤ 0.8≤ 2.5≤ 3.0

± 10± 10± 10± 10

≤ 4≤ 4≤ 4≤ 4

1250 µL Non-steril (F164530) Steril (F164535)

Min. 12.5 125 625Max. 1250

± 0.6± 1.1± 3.8± 7.5

≤ 0.5≤ 0.9≤ 3.1≤ 2.5

± 16± 16± 16± 16

≤ 8≤ 8≤ 8≤ 8

2.5 mL Non-steril (F164550) Steril (F164555)

Min. 25 250 1250Max. 2500

± 0.9± 1.8± 7.5± 12.5

≤ 0.8≤ 1.5≤ 3.8≤ 3.8

± 30± 30± 30± 30

≤ 15≤ 15≤ 15≤ 15

5 mL Non-steril (F164540) Steril (F164545)

Min. 50 500 2500Max. 5000

± 1.8± 3.5± 12.5± 25

≤ 1.5≤ 3.5≤ 10.0≤ 7.5

± 30± 30± 30± 30

≤ 15≤ 15≤ 15≤ 15


Min. 100 1000 5000Max. 10000

± 2.5± 7.0± 25.0± 40.0

≤ 4.0≤ 8.0≤ 25.0≤ 15.0

± 50± 50± 50± 50

≤ 30≤ 30≤ 30≤ 30

12.5 mL Non-steril (F164560) Steril (F164565)

Min. 125 1250 6250Max. 12.5

± 4.4± 10.0± 31.3± 62.5

≤ 8.1≤ 17.5≤ 37.5≤ 18.8

± 125± 125± 125± 125

≤ 75≤ 75≤ 75≤ 75


Min.: 250 2500 12.5 mLMax. 25 mL

± 7.5± 15.0± 62.5± 125

≤ 15.0≤ 25.0≤ 37.5≤ 37.5

± 125± 125± 125± 125

≤ 75≤ 75≤ 75≤ 75


Min. 500 5000 25 mLMax. 50 mL

± 15.0± 25.0± 125.0± 250

≤ 45.0≤ 60.0≤ 100.0≤ 75.0

± 250± 250± 250± 250

≤ 125≤ 125≤ 125≤ 125

*ST means Sterilized.

MODEL (DISTRITIPS PART NUMBER)

VOLUME (µL)


GILSON ISO 8655


RANDOM ERROR (µL)


RANDOM ERROR (µL)

125 µL Micro (F164100) Micro ST* (F164130)

Min. 2 5Max. 10

± 0.100± 0.125± 0.200

≤ 0.080≤ 0.075≤ 0.100

± 0.2± 0.2± 0.2

≤ 0.1≤ 0.1≤ 0.1

1250 µL Mini (F164110) Mini ST* (F164140)

Min. 20 50Max. 100

± 0.80± 1.00± 1.00

≤ 0.20≤ 0.40≤ 0.60

± 1.5± 1.5± 1.5

≤ 0.6≤ 0.6≤ 0.6

12.5 mL Maxi (F164120) Maxi ST* (F164150)

Min. 200 500Max. 1000

± 6.0± 7.5± 10.0

≤ 1.0≤ 1.5≤ 2.5

± 12.0± 12.0± 12.0

≤ 4.0≤ 4.0≤ 4.0

MODEL(PART NUMBER) VOLUME (mL) SCALING

(mL)


GILSON ISO 8655-5

SYSTEMATIC ERROR (mL)

RANDOM ERROR (mL)

SYSTEMATIC ERROR (mL)

RANDOM ERROR (mL)

DISPENSMAN 2.5 mL (F110101) 0.25–2.5 mL 0.05 ±0.012 ≤ 0.002 ±0.030 ≤ 0.010

DISPENSMAN 5.0 mL (F110102) 0.5–5 mL 0.10 ±0.030 ≤ 0.005 ±0.030 ≤ 0.010

DISPENSMAN 10 mL (F110103) 1–10 mL 0.20 ±0.060 ≤ 0.010 ±0.060 ≤ 0.020

DISPENSMAN 25 mL (F110104) 2.5–25 mL 0.50 ±0.150 ≤ 0.025 ±0.150 ≤ 0.050

DISPENSMAN 50 mL (F110105) 5–50 mL 1.00 ±0.300 ≤ 0.050 ±0.300 ≤ 0.100

www.gilson.com/contactus

Gilson. Inc. 3000 Parmenter Street • PO Box 620027 Middleton. WI 53562 USA T: 608-836-1551 or 800-445-7661 • F 608-831-4451

Gilson S.A.S. 19. avenue des Entrepreneurs BP 145 • F-95400 Villiers-le-Bel. France T +33 (0) 1 34 29 50 00 • F +33 (0) 1 34 29 50 20

LT800399/F | ©07/2017 Gilson. Inc. All rights reserved.

norm iso 8655 and gilson speci cations - pretech instruments · gilson strictly applies the...

Documents