not for reproduction - bascobsintek.basco.com/briggsdocumentdisplay/ngjxenp7p8zvj5k1... · purgue...

2
Not for Reproduction 80099905 Rev. A Items Included: QUICK START UP / SHUTDOWN GUIDE WARNING! Risk of eye injury. Spray could splash back or propel objects resulting in serious injury. Always wear indirect vented (chemical splash) safety goggles when using or near this product. Always wear protective clothing such as long-sleeved shirts, long pants and closed-toed shoes. The quick start up/shutdown guide is not a substitute for reading the manual; the manual contains detailed information and instructions that you must be aware of and follow in order to maintain the equipment properly and use it safely. Remember to record the date of purchase and model number in your manual. Items needed: (not included) • Grease • Garden hose, 50 ft. (15 m) or less • Safety goggles (indirect vented type) • Adjustable Wrench Start Up Place Outdoors 1 Working CO Alarms 2 Add Oil and Fuel 3 Lubricate O-Rings 4 Connect Hose 5 Connect Garden Hose 6 Purge System 7 Connect Spray Tip and Wand to Gun 8 Switch On (I) 9 Pull Recoil 13 Outdoor Use Only Shutdown Switch Off (0) 2 Purge System 4 Fuel Off 3 Fuel On 12 Run 14 Choke 11 Throttle Fast 10 Throttle Slow 1 Replace Pump Oil Cap (Model 020821 ONLY) NOTICE Failure to install vented plug/dipstick will result in a pump failure and void the warranty. Copyright © 2021. All rights reserved. Briggs & Stratton, LLC. Milwaukee, WI, USA. Oregon® is a registered trademark of Blount, Inc. in the United States and other countries. Used under license. No part of this material may be reproduced or transmitted in any form without the express written permission of Briggs & Stratton, LLC. Every effort has been made to ensure that the information in this document is accurate and correct. However, we reserve the right to alter or otherwise improve the product and this document at any time without prior notice and without incurring obligation. (833) 871-4330 www.oregonproducts.com Handle Attachment Spray Tips Spray Wand Spray Gun Engine Switch Recoil Starter Fuel Cap High Pressure Hose Throttle Lever Oil Fill/Dipstick High Pressure Outlet Water Inlet Choke Lever Fuel Shut-off Lever

Upload: others

Post on 27-Feb-2021

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Not for Reproduction - BASCObsintek.basco.com/BriggsDocumentDisplay/ngjxENP7p8ZVj5K1... · Purgue el sistema 7 Conecte la vara y boquillas rociadoras 8 Interruptor encendido (I) 9

Not for

Reprod

uctio

n

80099905 Rev. A

Items Included:

QUICK START UP / SHUTDOWN GUIDEWARNING! Risk of eye injury. Spray could splash back or propel objects resulting in serious injury.

• Always wear indirect vented (chemical splash) safety goggles when using or near this product.

• Always wear protective clothing such as long-sleeved shirts, long pants and closed-toed shoes.

The quick start up/shutdown guide is not a substitute for reading the manual; the manual contains detailed information and instructions that you must be aware of and follow in order to maintain the equipment properly and use it

safely. Remember to record the date of purchase and model number in your manual.

Items needed: (not included)• Grease • Garden hose, 50 ft. (15 m) or less • Safety goggles (indirect vented type) • Adjustable Wrench

Start Up

Place Outdoors

1

Working CO Alarms

2

Add Oil and Fuel

3

Lubricate O-Rings

4

Connect Hose

5

Connect Garden Hose

6

Purge System

7

Connect Spray Tip and Wand to Gun

8

Switch On (I)

9Pull Recoil

13

Outdoor Use Only

Shutdown

Switch Off (0)

2

Purge System

4

Fuel Off

3

Fuel On

12

Run

14

Choke

11

Throttle Fast

10

Throttle Slow

1

Replace Pump Oil Cap (Model 020821 ONLY)

NOTICE Failure to install vented plug/dipstick will result in a pump failure and void the warranty.

Copyright © 2021. All rights reserved. Briggs & Stratton, LLC. Milwaukee, WI, USA. Oregon® is a registered trademark of Blount, Inc. in the United States and other countries. Used under license. No part of this material may be reproduced or transmitted in any form without the express written permission of Briggs & Stratton, LLC.

Every effort has been made to ensure that the information in this document is accurate and correct. However, we reserve the right to alter or otherwise improve the product and this document at any time without prior notice and without incurring obligation.

(833) 871-4330

www.oregonproducts.com

Handle Attachment

Spray TipsSpray Wand

Spray Gun

Engine SwitchRecoil Starter

Fuel Cap

High Pressure Hose

Throttle Lever

Oil Fill/Dipstick

High Pressure Outlet

Water Inlet

Choke LeverFuel Shut-off Lever

Page 2: Not for Reproduction - BASCObsintek.basco.com/BriggsDocumentDisplay/ngjxENP7p8ZVj5K1... · Purgue el sistema 7 Conecte la vara y boquillas rociadoras 8 Interruptor encendido (I) 9

Not for

Reprod

uctio

n

Elementos incluidos:

La guía rápida de arranque/apagado no sustituye la lectura del manual; el manual contiene información detallada e instrucciones que debe conocer y seguir para mantener el equipo en condiciones apropiadas y usarlo de manera segura. Recuerde

registrar la fecha de compra y el número de modelo en su manual.

GUÍA RÁPIDA DE ARRANQUE/APAGADO¡ADVERTENCIA! Riesgo de lesión ocular. El agua rociada podría salpicar o expulsar objetos, lo que puede resultar en lesiones graves.

• Siempre use gafas de seguridad con ventilación indirecta (salpicaduras de sustancias químicas) cuando utilice este producto o esté cerca del mismo. (Las gafas de seguridad no brindan una protección total).

• Siempre use ropa protectora como camisa de manga larga, pantalones largos y calzado cerrado.

Elementos necesarios: (no incluidos) • Grasa • Manguera de jardín, 50 pies (15 m) o menos • Gafas de seguridad (tipo de ventilación indirecta) • Llave ajustable

Coloque en exteriores

Arranque1

Alarmas de CO funcionales

2

Agregue aceite ycombustible

3

Lubrique las juntas tóricas

4

Conectar manguera

5

Conect la manguera de jardin

6

Purgue el sistema

7

Conecte la vara y boquillas rociadoras

8

Interruptor encendido (I)

9 Jalar arrancador de retroceso

13

Sólo para uso en exteriores

Interruptor apagado (0)

2

Purgue el sistema

4

Combustible apagado

3

Combustible encendido

12

Funcionar

14

Ahogador

11

Válvula reguladora rápido

10

Apagado

Válvula reguladora lento

1

Retirar la tapa de bomba de aceite (SOLO Modelo 020821)AVISO Si no se instala la válvula de ventilación/la bayoneta la bomba fallará y la garantía se anulará.

Aditamento de mango

MOFLE

apúntelo en dirección opuesta a la casa

ALARMA(S) DE MONÓXIDO DE CARBONOInstale alarmas de monóxido de carbono en el interior de su casa. Sin alarmas de monóxido de carbono en funcionamiento, es posible que no se dé cuenta de que se está intoxicando y muriendo debido a una intoxicación por monóxido de carbono.

USE EN EXTERIORES - EVITE EL ENVENENAMIENTO POR MONÓXIDO DE CARBONO - CONSULTE EL MANUAL

Copyright © 2021. Reservados todos los derechos. Briggs & Stratton, LLC. Milwaukee, WI, USA. Oregon es una marca registrada de Blount, Inc. en los United States y otros región. Usa abajo licencia. Queda prohibida la reproducción o transmisión total o parcial de este material, sin el permiso previo y por escrito de Briggs & Stratton, LLC.

Se ha realizado el máximo esfuerzo para reunir en este manual la información más precisa y actualizada. No obstante, nos reservamos el derecho de modificar o mejorar de cualquier otra forma el producto y este documento en cualquier momento y sin previo aviso, y sin incurrir en ninguna obligación.

(833) 871-4330

www.oregonproducts.com

Boquillas rociadoras

Vara rociadora

Pistola rociadora

Llave del motorArrancador retráctil

Tapa del combustible

Palanca de control de la válvula de

regulación

Tapa de llenado de aceite y varilla indicadora de nivel de aceite

Toma de alta presión

Entrada de agua

Perilla del cebador

Manguera para alta presión

Válvula de combustible