notching machine tap-6/2
TRANSCRIPT
-
7/24/2019 Notching Machine TAP-6/2
1/2
MAKRON OY
Keskikankaantie 9FI-15860 HOLLOLA,
FINLAND
www.makron.fi
-
7/24/2019 Notching Machine TAP-6/2
2/2
TECHNICAL DATA
TAP-6/2 is designed for making corner joint notches for rectangular logs.Possible notching models:
Complete four-sided notching Complete four-sided notching at log end Side notching Top notching / bottom notching
The machine is equipped with four notching units, two on horizontal guides andtwo on vertical guides. Movements of the notching units are performed bymeans of hydraulic cylinders.
NOTCHING MACHINE TAP-6/2
Main dimensions 1500 x 2100 x 2000 mm Vertical notching unit
Working level 1100 mm - shaft diameter 50 mm
Weight 1400 kg - usable length of shaft 160 mm- spindle speed 3920 r/min
Log position horizontal - tool diameter 250 mm
Log height 160 210 mm
Log thickness 90 180 mm Horizontal notching unit
- shaft diameter 40 mm
- usable length of shaft 170 mm
Motor powers
- horizontal units 2 x 5,5 kW - spindle speed 5600 r/min
- vertical units 2 x 7,5 kW - tool diameter 160 mm
- hydraulic unit 2,2 kW
Total power 28,2 kW Compressed air requirement 240 Nl/min; 0,6 MPa
Compressed air connection Saw dust outlet 1 x 200 mm
Suction air amount ~ 10000 m3/h Notching speed 22 - 35 sec/notching
Hydraulic pressure 150 bar
Output of hydraulic pump 11 l/min
WORKING PRINCIPLE