notes type - intense lighting · collar type standard ec1 ec2 max ceiling thickness up-to 5/8”...

MXG2DRTR3.5” MX G2 LED Lensed Downlight - Wet Location

FEATURES ■ Multiple architectural trim options ■ High center beam spot up to 22,600 CBCP

■ Dedicated 9° with field changeable 12°, 24°, 36° & 50° optics

LED LIGHT ENGINE ■ 92 CRI & 82 CRI in 2700K, 3000K, 3500K and 4100K with 2 SDCM binning

■ >50,000 hours L70 (rated life at 70% output)

ELECTRICAL SYSTEM ■ Multiple dimming drivers available ■ (Non-IC) 120V or 277V input; Power factor >.9 50/60Hz

■ (-IC/-CP) Universal 120V/277V input; Power factor >.9 50/60Hz

■ This product complies with IEEE C62.41 for surge endurance up to 2.5KV. Additional surge protection recommended. Damage from power surge is not covered by warranty.

DIMMING ■ 0-10V Dimming 1% ■ Forward/reverse dimming 1% (120V only)

■ EldoLED 0-10V 0.1% or 1% ■ Lutron® LDE1 Hi-Lume 1% EcoSystem LED driver with Soft-on, Fade-to-Black dimming technology

■ Lutron® LTEA2W Hi-Lume 1% 2-Wire LED driver (120V forward phase only)

■ DMX512 RDM 0.1%

HOUSING ■ Heavy duty black powder coated 18 gauge steel frame

■ Standard housing accommodates 5/8” ceiling thickness

■ Extended collar options available for ceilings up to 1” or 2” thick, must specify either EC1 or EC2 (EC1/EC2 Not available with Chicago Plenum)

TRIM SPECIFICATIONHigh quality die-cast A380 aluminum trims with durable powder coat finishes. Architectural, discrete self flange or painted white flange options available. Trim is available with solite, clear tempered or frosted lens, must specify. Trims available in 1 1/2” regress for greater visual comfort or 1/2” regress for consistent look throughout space.

INSTALLATIONHousing types include IC Air-Tight, CCEA (Chicago Plenum), or Non-IC Rated (must specify). Non-IC rated housings must be kept at a minimum of 3” away from insulation. Butterfly brackets are compatible with C-channel, adjustable bar hangers (14”-25”) and EMT. C-channel is recommended for T-bar ceilings. Bar hangers must be ordered separately. Max. ambient temperature: 131°F (55°C).

EMERGENCY BACKUPRemote test switch included. External battery operates LED load at a minimum of 450 to 750 lumens for 90 minutes, depending on backup wattage selected. See trim multipliers for detailed performance. Servicing requires above ceiling access.(EM not available with Chicago Plenum)

LISTING / WARRANTY ■ 5-Year Intense LED Limited Warranty ■ ETL listed to US and Canadian standards for wet locations

■ (-IC/-CP Only) Air-Tight Certified ASTM E283

■ (-IC/-CP Only) ETL listed for direct contact w/insulation

■ (-CP Only) CCEA Chicago Plenum ■ ENERGY STAR® Qualified 1

■ Can be used to comply with 2016 Title 24, Part 6, JA8 high efficacy LED light source requirements 2

21

Housing Part Number (Example: MXG2DRTR-ICL1)

Housing Installation Type Ceiling Thickness Wattage Dimming Voltage Options

MXG2DRTR -NC-IC-CP

(Non-IC)(Air-Tight IC)(Chicago Plenum)

blankEC13

EC23

(5/8”)(1”)(2”)

L0L1L2L34

(10W)(16W)(20W)(26W)

blankDELV5

D101ED10V16

ED10V016

LUT7

LUT25

DMXR8

(Non-Dimming)(Phase Dimming)(0-10V Dimming 1%)(eldoLED 0-10V 1%)(eldoLED 0-10V 0.1%)(Lutron® LDE1 EcoSystem 1%)(Lutron® LTEA2W 2-Wire 1%)(DMX512 RDM 0.1%)

blank

27

(Non-IC: 120V-IC/-CP: 120V/277V)(277V Non-IC Only, for -IC/-CP housing options use blank)

I100I200I400EM79

EM129,10

(C-Channel Bar Hangers)(Flat Bar Hangers)(Wood Joist Bar Hangers)(7W Emergency BackupIOTA Part #ILB-CP07-A)(12W Emergency BackupIOTA Part #ILB-CP12-A)

Trim Part Number (Example: MXTG2-RTRD302W-SFL13024-SL)

Trim Finish Wattage CCT / CRI Optic Lens

MXTG2-RTRD302 (1 1/2” Regress)MXTG2-RTRR302(1/2” Regress)

B-SFB-SFWW-SFSN-SFSN-SFW11

AB-SFAB-SFW11

WH-SFWH-SFW11

(Black / Self Flanged)(Black / Self Flanged White)(White / Self Flanged)(Satin Nickel / Self Flanged)(Satin Nickel / Self Flanged White)(Antique Bronze / Self Flanged)(Antique Bronze / Self Flanged White)(Wheat / Self Flanged)(Wheat / Self Flanged White)

L0L1L2L34

(10W(16W)(20W)(26W)

27279303093535941419

(2700K / 82 CRI)(2700K / 92 CRI)(3000K / 82 CRI)(3000K / 92 CRI)(3500K / 82 CRI)(3500K / 92 CRI)(4100K / 82 CRI)(4100K / 92 CRI)

0912

12243650

(9° Narrow Spot)(12° Spot)(24° Narrow Flood)(36° Flood)(50° Wide Flood)

-SL-CR-FR

(Solite)(Clear Tempered)(Frosted)

Notes:1. ENERGY STAR® Qualified (White

reflectors only; Excludes: L2, L3, 92 CRI & 9° options)

2. L0 only; Excludes: 82 CRI & 9° options

3. EC1/EC2 not available with (-CP) Chicago Plenum

4. L3 available with Non-IC housings only

5. Available in 120V only6. Not Available in L37. Not Available in L2 & L38. DMX512 RDM not available in L0 & L19. Access above ceiling required; not

available with (-CP) Chicago Plenum10. Not available in L011. Consult factory for lead times12. 9° Narrow spot not available in

L2 & L3

ELECTRICAL DATA

LED Light Engine System Wattage * CCT / CRI Delivered Lumens ** Lumens Per Watt

L0L1L2L3

10W16W20W26W

3000K / 82 CRI3000K / 82 CRI3000K / 82 CRI3000K / 82 CRI

850lm1200lm1400lm1700lm

85757065

* System Wattage includes driver and LED Module consumption.** Delivered lumens will vary depending on trim, CCT, CRI, optic and ceiling thickness

Housing Dimensions Are On Page 2

MXTG2-RTRD302(1 1/2” Regress)

Black White Satin Nickel

Available Trim Finishes

Antique Bronze Wheat

MXTG2-RTRR302(1/2” Regress)

1 1/2”

3 1/2”

4 1/2”

0.15” Trim Thickness

1/2”

3 1/2”

4 1/2”

0.15” Trim Thickness

JOB NAME

CATALOG NUMBER

NOTES TYPE

MX DOWNLIGHTING L/M-0624:19 P-5

INTENSE LIGHTING | 3340 E La Palma Ave, Anaheim, CA 92806 | tel 714 630-9877 | fax 714 630-9883For Intense Lighting’s limited product warranty, go to www.intenselighting.com. For a printed copy of the warranty, you may call 800 961-5321.© 2019 Intense Lighting, LLC. All rights reserved. Note: This document is subject to change without notice.

http://www.iotaengineering.com/ILB/ILBCP07spec.pdf

http://www.iotaengineering.com/ILB/ILBCP12spec.pdf

MXG2DRTR3.5” MX G2 LED Lensed Downlight - Wet Location

4 1/4”

5 3/8”

12”

12”7 3/4”

NON-IC & AIR TIGHT IC DIMENSIONS

CCEA CHICAGO PLENUM DIMENSIONS

Ceiling Cut Out: 4 1/8”

5/8” StandardEC1 = 1”EC2 = 2”

Ceiling Cut Out: 4 1/8”12”

12”7 3/4”

4 1/4”

7 1/4”

5/8” StandardEC1 = 1”EC2 = 2”

OPTICS REPLACEMENT1. Rotate release cap by turning counter clockwise.2. Install accessories into accessory holder and replace accessory holder’s retaining clip.3. Place accessory holder and accessory flush against optic and replace release cap.

Release cap

Retainer ring

Optic

Optics

IP-OP4712IP-OP4724IP-OP4736IP-OP4750

(12° Spot)(24° Narrow Flood)(36° Flood)(50° Wide Flood)

Plaster Frame Accommodation

Collar Type Standard EC1 EC2

Max Ceiling Thickness Up-to 5/8” Up-to 1” Up-to 2”

Plaster Frame Accommodation

Collar Type Standard EC1 EC2

Max Ceiling Thickness Up-to 5/8” Up-to 1” Up-to 2”

JOB NAME

CATALOG NUMBER

NOTES TYPE



24° Narrow Flood (24)

Candelas at Nadir

Degree CBCP

0°5°15°25°35°45°

410436321263207233

Watts: 10Lumens: 794 LPW: 79 CCT: 3000K

28.5fc

41fc

46.1fc

114fc 2.5’

3.3’

4.2’

5’

Candelas at Nadir

Degree CBCP

0°5°15°25°35°45°

12456690451987325


86.5fc

125fc

195fc

346fc 1.2’

1.5’

1.9’

2.3’Beam

DiameterFootcandles

at Nadir

12’

10’

8’

6’

Throw Distance

12° Spot (12)

Candelas at Nadir

Degree CBCP

0°5°15°25°35°45°

249525191486412646


17.3fc

25fc

39fc

69.3fc 3.5’

4.7’

5.9’

7.1’

36° Flood (36)

Candelas at Nadir

Degree CBCP

0°5°15°25°35°45°

970102691152720451


6.7fc

9.7fc

15.2fc

27fc 5.5’

7.4’

9.2’

11.1’

50° Wide Flood (50)

Candelas at Nadir

Degree CBCP

0°5°15°25°35°45°

575050901752291304

Watts: 15.6Lumens: 1103 LPW: 71 CCT: 3000K

43.4fc

62.5fc

97.7fc

174fc 2.5’

3.3’

4.1’

4.9’

Candelas at Nadir

Degree CBCP

0°5°15°25°35°45°

171929571731116447


130fc

187fc

292fc

519fc 1.2’

1.5’

1.9’

2.3’Beam

DiameterFootcandles

at Nadir

12’

10’

8’

6’

Throw Distance

12° Spot (12)

Candelas at Nadir

Degree CBCP

0°5°15°25°35°45°

29772970199065112413


22.5fc

32.4fc

50.6fc

89.9fc 3.9’

5.2’

6.5’

7.8’

36° Flood (36)24° Narrow Flood (24)

Candelas at Nadir

Degree CBCP

0°5°15°25°35°45°

14171494129872627770


10.7fc

15.4fc

24.1fc

42.8fc 5.4’

7.2’

9’

10.8’


MXTG2-RTRD302WL0-CRReport #: ILL-01262016-37 (12) ILL-01262016-40 (24) ILL-01262016-43 (36) ILL-01262016-46 (50)

MXTG2-RTRD302Ceiling Thickness Multipliers: 5/8” Thickness (x 1.00)1” Thickness (x 0.90)2” Thickness (x 0.80)

MXTG2-RTRR302Ceiling Thickness Multipliers: 5/8” Thickness (x 0.90)1” Thickness (x 0.77)2” Thickness (x 0.63)

CCT MULTIPLIERS: 82 CRI 92 CRI2700K (x 0.93) (x 0.76)3000K (x 1.00) (x 0.87)3500K (x 1.00) (x 0.87)4100K (x 1.00) (x 0.87)

LENS MULTIPLIERS: Solite (x 0.92)Clear (x 1.00) Frosted (x 0.92)

EMERGENCY MULTIPLIER: 7W Emergency (x 0.70)






EMERGENCY MULTIPLIER: 7W Emergency (x 0.50)12W Emergency (x 0.85)

JOB NAME

CATALOG NUMBER

NOTES TYPE



Candelas at Nadir

Degree CBCP

0°5°15°25°35°45°

19864126047331596310


138fc

199fc

310fc

552fc 1.3’

1.7’

2.1’

2.6’Beam

DiameterFootcandles

at Nadir

12’

10’

8’

6’

Throw Distance

12° Spot (12)

Candelas at Nadir

Degree CBCP

0°5°15°25°35°45°

35823501232576215314


24.9fc

35.8fc

56fc

99.5fc 3.9’

5.2’

6.4’

7.7’

36° Flood (36)

Candelas at Nadir

Degree CBCP

0°5°15°25°35°45°

890675112159253314


61.8fc

89.1fc

139fc

247fc 2.3’

3’

3.8’

4.5’


Candelas at Nadir

Degree CBCP

0°5°15°25°35°45°

16641742150283531981


11.6fc

16.6fc

26fc

46.2fc 5.3’

7.1’

8.9’

10.7’


Candelas at Nadir

Degree CBCP

0°5°15°25°35°45°

22627145248241806712


157fc

226fc

354fc

629fc 1.3’

1.7’

2.2’

2.6’Beam

DiameterFootcandles

at Nadir

12’

10’

8’

6’

Throw Distance

12° Spot (12)

Candelas at Nadir

Degree CBCP

0°5°15°25°35°45°

48784800278375613113


33.9fc

48.8fc

76.2fc

135fc 3.5’

4.7’

5.8’

7’

36° Flood (36)

Candelas at Nadir

Degree CBCP

0°5°15°25°35°45°

1115496412938345406


71.3fc

103fc

160fc

285fc 2.4’

3.1’

3.9’

4.7’


Candelas at Nadir

Degree CBCP

0°5°15°25°35°45°

155315811461919390112


10.8fc

15.5fc

24.3fc

43.1fc 6’

8’

10’

12’














JOB NAME

CATALOG NUMBER

NOTES TYPE



notes type - intense lighting · collar type standard ec1 ec2 max ceiling thickness up-to 5/8”...

Documents