november 2015 issue

M A C H I N E R Y

NOVEMBER 2015Volume 30 Number 11Phone: 905-528-7765Fax: 905-917-0222

www.cluemachines.comemail: [email protected]

STEVENS MACHINERY SALES INC.NEW AND USED FABRICATING & METALWORKING MACHINERY SALES & SERVICES FOR OVER 38 YEARS

2 Royalcrest Road, Etobicoke (Toronto) ON, Canada M9V 2L5 Phone: 416-798-3611 Toll Free: 1-866-798-3611www.stevensmachine.com email: [email protected]

SERIES 4The press is totally pneumatic providing 6 tons of force and has a 45.7 cm / 18" throat depth which provides clearance for a variety of chassis configurations.It is designed to install self-clinching fasteners in size M2 / #0 thru M10 / 3/8" in steel, and sizes up to M12 / 1/2" in aluminum panels and circuit boards.

NEWSTANDARDFEATURES

Stroke Counter

Laser Pointer

Lockable Tool/Accessories Storage

Cabinet

1000 lbs. to 6 tons.

FEATURES AND BENEFITS

WITH AUTOMATIC FEED

® ®

tools and accessories storage.

™

The PENSERTER Series 4 press with automatic feed provides 6 tons of force and has a 45.7cm / 18" throat depth which provides clearance for a varietyof chasis configurations. It is designed to install self-clinching nuts, studs, and standoffs in sizes M2.5 to M6 / #2-56 to 1/4".

SERIES 4 SERIES 2000This automatic fastener-installation press system incorporates upgraded operating features and expansion capabilities topromote streamlined job productivity and quality. The press offers the idealtechnology to install all types of self-clinching fasteners rapidly, reliably, and permanently in thin metal plate.

FEATURES AND BENEFITSFEATURES AND BENEFITS

®® ® ®®®

STEVENS MACHINERY SALES INC.2 Royalcrest Road, Toronto ON, M9V 2L5

Phone: (416) 798-3611 Fax: (416) 798-8439Email: [email protected] Website: www.stevensmachines.com

PLEASE CALL, VISIT OR SEE MY WEBSITE!

LARGEST INVENTORY OF USED SMALL PUNCH PRESSES IN CANADA!

NEW MIDWEST DEBURRING MACHINE – 100% MADE IN THE U.S.A!

NEW GADE CNC HYDRAULIC PRESS BRAKES – MADE IN ITALY!

NEW COASTONE SERVO-ELECTRIC CNC PRESS BRAKES!

NEW PEMSERTER INSERT PRESSES!

AIR COMPRESSOR – 5 HP, VERT. 60 GAL. 550 V - $595.00AIR COMPRESSOR – 5 HP, HOR.80 GAL, 575V - $950.00BEADER-JORG, 21 G, 6” TH, ¾ HP, 575 V - $1,950.00BRAKE-ALLSTEEL, 10 FT X 70 TON, 575 V - $10,500.00BRAKE-HACO, 12 FT X 165 TON, 6 AXIS CNC- $54,500.00 DEBURRING– 37”W,CEMCO,SCOTCHBRITE ROLL - $19,500.00DEBURRING-9" WIDE, 1 HEAD, MIDWEST, BELT-NEW - PORDEBURRING–37” WIDE, 1 HEAD, MIDWEST BELT-NEW - PORDEBURRING-37” WIDE, 2 HEAD, MIDWEST BELT/BELT- PORDIE SHOES – GOOD QUANTITY, VARIOUS SIZES – PORDRILL PRESS–#3 MT,IBARMIA, G.H. PWR FDS - $3,950.00DRILL PRESS-#3 MT, IMA,GH HD,PWR FEEDS - $3,950.00DRILL-RADIAL-#3 MT, KING, 22”, 220/60/1 - $1,950.00DRILL-RADIAL-#3 MT, STANDARD, 24” ARM, - $3,950.00DRILL-RADIAL-#4 MT, TOME, 45"ARM, 575 V - $7,950.00GRINDER-SURFACE-6”x12”,CHEVALIER,MANUAL - $2,500.00 INSERT PRESS-6 TON, PEMSERTER,#4,NEW-US.- $9,750.00INSERT PRESS-6 TON,PEMSERTER,#4AF,NEW-US - $15,750.00INSERT PRESS – 6 TON, HAEGER,(AS IS) - $2,500.00 IRONWORKER-50 TON, HACO SHARK, 10 HP - $7,950.00LATHE-12” SW X 30” CC STANDARD MODERN - $3,950.00MILL-TURRET,R8,COMET, 50”x10”,3HP,575V - $3,500.00MILL-TURRET, R8, 11” x 49”,TOS,16 SPDS - $3,950.00MILL-TURRET, #40 MT, 12”x 54”, V.S, DRO - $4,950.00MILL-UNIVERSAL,DECKEL,FP2LB,3HP,550 VOLT- $7,950.00NOTCHER UNIT – C/W: 2 NOTCHERS, AIR/OIL - $3,750.00PANTOGRAPH, DECKEL, # G1L, 2D, 110 VOLT - $1,500.00PRESSES-KICK, 5 TON, ROPER 58,WHITNEY 68- $1,350.00PRESS - ARBOR– 3 TON, GREENERD, 6” TH. - $350.00PRESS – 1 TON, DENISON, HYDRAULIC, 110 V- $1,250.00PRESS – 2 TON, ALCECO, ¼” ST, 110 VOLT - $2,150.00PRESS – 2 TON, ALVA ALLEN, ¾” ST, 110 V - $2,150.00PRESS – 2 TON, BENCHMASTER, 1”ST, 110 V - $1,850.00PRESS – 3.5 TON, ALCECO, 12” TH, 110 V - $2,500.00PRESS – 4 TON, ALCECO, 1-1/4” ST, (8) - $2,250.00PRESS – 4 TON, AZIMUTH, 9”SH., 110 VOLT - $2,950.00

PRESS – 4.5 TON, FAMCO, 1-1/2” ST, (2) V- $2,150.00PRESS – 5 TON, ALVA ALLAN, 1-1/4” ST,(4) - $2,250.00PRESS – 5 TON, BENCHMASTER, 1” ST,,110 V - $2,250.00PRESS – 5 TON, ROUSSELLE, 1-1/4” ST, 110V- $2,450.00PRESS – 6 TON, AZIMUTH 1-1/4” ST, 575 V - $2,950.00PRESS – 6 TON, AZIMUTH, 1-1/4” ST, 110 V - $2,950.00PRESS – 10 TON, ROUSSELLE, 2” ST, 110 V - $2,950.00PRESS – 15 TON, ROUSSELLE, 2” ST, 110 V - $2,500.00PRESS – 15 TON, ROUSSELLE,2” ST, 18” TH - $3,500.00PRESS – 20 TON, BLOW, 2” ST, 1 HP, 575 V - $2,850.00PRESS – 25 TON, ROUSSELLE, 3” ST,AIR/MECH- $4,250.00PRESS - 25 TON, YOSHINO, 1/4" ST, A/C,575- $7,500.00PRESS,- 70 TON, STANKO, A/C, 4” ST, 550 - $12,500.00ROLLING MILL, IRM, 2 HIGH, 6” W X 4” OD - $35,950.00ROLLS – PINCH, 36” X 22 G, 2” DIA, MANUAL - $750.00SAND BLAST CABINET, EMPIRE,S-20, 110 VOLT - $850.00SAND BLAST CABINET, EMPIRE, PF-3648 SRB-4- $3,950.00SANDER, STROKE, PROGRESS,8 FT,5 HP,550 V - $2,500.00SAW - ROLL-IN, BAXTER, 10" X 12", 115 V - $2,995.00SAW – ROLL-IN, E.R.MAIER, 10” X 12”,115 V- $2,995.00SAW–DBLE MITRE, PISTORIUS, 2 X 12” BLDES - $1,500.00SAW – VERT BAND, 20” TH, STARTRITE, VS - $3,950.00SAW – VERT BAND, 20”TH, T JAW, VS,WELDER - $3,950.00SHEAR – 48” X 16 G, GENERAL, FOOT, - $1,750.00SHEAR – 54” X 16 G, BARTH, FOOT, 19” GAP - $3,250.00SHEAR – 54” X 16 G, B & B, AIR, 19” GAP - $4,950.00SWAGGER-TORRINGTON,ROTARY,7/8”TUBE, 3 HP - $8,750.00TUBE BENDER-BLUE BOY, HORIZ, 3”, TOOLING - $7,500.00TUBE BENDER-DI-ACRO, # 2 MANUAL, TOOLS - $1,450.00TUBE BENDER-DI-ACRO STYLE, #2 MANUAL - $1,450.00UNCOILER – COLT,4,000 LB,18" W, 110 V - $4,950.00UNCOILER – DURANT,1,000 LB, ½ HP,110 V - $1,250.00UNCOILER – MANUAL,5,000 LB, 24”W X 60”OD - $1,000.00WELDER – SPOT, 10 KVA, WELDOMATIC,12” TH - $2,950.00WELDER – SPOT, 25 KVA WELDOMATIC,7-1/2”TH - $4,500.00WELDER – PROJECTION,100 KVA,24” TH, 575 V - $5,950.00

Clue November, 2015

a TOS Varnsdorf company

TOS Trade Canada Inc.415 Industrial Dr.Milton, ON L9T 5A6http://www.tostrade.com

Tel: (905) 878 0888Fax: (905) 878 [email protected]

WHN-13 CNCStructured to guaranteehigh rigidity, reliabilityand accuracy.

Wide range of technologicalfunctions

www.tostrade.com

Starting at:$499,000 US

X - 3500 mm / 137.79”Y - 2500 mm / 98.42”Z - 1600 mm / 62.99”W - 800 mm / 31.49”

Spindle 130mm / 5.1”Speed 3000 rpm

Table 1800 x 2200 mm 70.8” x 86.6”

CNC Fanuc / Heidenhain

Clue November, 2015

CLUE, November2015

63 Maplecrete Road, Concord, Ontario, L4K 1A5 Canada

Tel: (905) 669-7507 ! Fax: (905) 669-7512e-mail: [email protected] ! web: www.tradermachinery.com

BENDERS, HYDRAULIC

5-1/2" ENERPAC, Hyd. Pipe bender, w/assisted tooling

BORING MILLS, VERT

63"sw TOSHIBA, TMC-13(3), CNC, C-axis w/ Fanuc 32i

BRAKES, PRESS

30 to 3000 Ton “NEW” ACCURPRESS Models CNC

35 Ton x 6’ DIACRO, 14-72, Hydra-Mechanical, Front Op. Manual Gauge

45 Ton x 4’ “NEW” ACCURPRESS, S4504, CNC, Y, X, R, Crowning, Laser safety

50 Ton x 4’ “NEW” ACCURPRESS, SH5004, Hybrid, CNC Touch screen

55 Ton x 6’ PACIFIC, Hurco CNC, Single-axis

60 Ton x 8’ ACCURPRESS, 7608, 2-Axis CNC, Light curtains

70 Ton x 10’ ALLSTEEL, Hyd.

75 Ton x 10’ “NEW” ACCURPRESS, CNC

88 Ton x 8’ AMADA, FBDIII-8025NT (2000), AMNC-PC-7 Axis touch screen

93.5 Ton x 87" TRUMPF, Trubend 5085 (2011), 6-Axis, Like New

110 Ton x 10’ HACO, PPM 30100, CNC, 2-Axis ATL500

120 Ton x 8’ ALLSTEEL, CNC, Single-Axis Gauge


138 Ton x 10’ AMADA, FBDIII-1253NT (2001), AMNC-PC-7 Axis touch screen

143 Ton x 10’ AMADA, HDS-1303NT (2005), Servo Hyd. Hybrid CNC



300 Ton x 10" CINCINNATI, 300H Series, Hyd.

DRILLS, COLUMN & BENCH

1-3/8"cap “NEW” DRILLMASTER, Z5035, Geared Head

DRILLS, RADIAL

3’ arm “NEW” TONE FAN, RD-900

3’ Arm SUNLIKE, 1500rpm, w/work table

9’arm SHENYANG, Box table

GRINDERS, CYLINDRICAL

5"x 13" JONES & SHIPMAN, 1212E

GRINDERS, SURFACE, RECIPROC

6" x 18" “NEW” KENT, KGS-200

8"x 18" FREJOTH, Automatic, Hyd.

12"x 24" OKAMOTO (2007), CNC, Fanuc 21MB

HONES

SUNNEN, MBC-1804M & MBC-1802MR, Power Stroke, Horiz.

SUNNEN, MBB-1660K, Manual

SUNNEN, MBB-1650, Manual, Asst’d Tooling & Cabinet

PRESSES, INSERTION

8 Ton HAEGER

8 Ton PEMSERTER, Series 2000 (2002), PLC control

IRONWORKERS

55 Ton “NEW” MAKO, Universal, 5"x 5"x 3/8" angle

LASERS

2000 Watt - 33 Ton AMADA, ApelioIII, 375V, Hyd Punch/Laser Machine

3000 Watt BYSTRONIC, Bystar 2512 (2002), 4’ x 10’

4000 Watt AMADA, FO3015 (2002), 5’ X 10’, w/Shuttle table

5000 Watt TRUMPF, L3050 (2005), 5’ x 10’

LATHES, ENGINE

12" x 40" “NEW” MORTON, F1900-AEG (2001), Single Phase

14"x 40" JIMT, JIMT360, Toolroom, 10" chk

18" x 60" “NEW” POWERTURN, 460

22"x 78" SHENYANG (2007), 4" bore, 3 & 4 Jaw chucks, steady

63"X 106" BOKO, D82H, Semi-Automatic Spinning lathe

LATHES, N/C & CNC

DMG, CTX 410 (2008), Live tool, Fanuc 32, Excellent!

OKUMA, LNC-8 (1997), OSP-700, 10" chuck, 15.75" Max Sw, 2" Bar cap

HAAS, SL20T (2005)

MORI SEIKI, SL150S (1997)

MORI SEIKI, NL3000/1250 (2007), MSX850 II Control, C&Y Axis Milling, 10"Chk, Live holders

MORI SEIKI, NL2500/700 (2006), MSX850 Control, 10"Chk, live holders, C&Y Mill cap

ROMI, M17 (2007) 17"x 43", Fanuc 21i, 8"Chk

TOOLMEX, TUR560MN-2000 (2012) 22"x 78.7", Siemens 840D, 16" Chk.

TOOLMEX, TUR630AMN-3000 (2008) 24.8"x 118", Siemens 840D, 16” Chk.

MACHINING CTRS, HORZ

OKUMA, MX-60HB (1997), X-39.37" Y-31.5" Z-31.8", OSP7000

MACHINING CTRS, VERT

HAAS, VF1 (2005), X-20" Y-16" Z-20", 15,000 rpm

FADAL, VMC40, X-22" Y-16" Z-20", CNC 88 Ctrl

MIKRON, HSM-600U (2006), X-31.4" Y-23.6" Z-19.7", 5-Axis high speed

MAKINO, S56 (2007), X-35.4" Y-19.7" Z-17.7", Professional 5 CNC, 13,000 rpm

MILLTRONICS, RH20 (2000), X-40" Y-20" Z-24", Centurion 6 control

HAAS, VF-4B (2008), X-50" Y-20" Z-25", 5-Axis, TR210 Trunion Table

MILLS, VERTICAL

9" x 49" "NEW" MAGNUM-CUT, VM-2V, 3hp

10"x 52" DELTA, V/S, 3-Axis DRO, P/F X,Y,Z, Asst’d Holders & Tooling

10" x 54" "NEW" MAGNUM-CUT, VM-4V, 40 Taper, 5hp

12"x 51" TOS, FNK2 (1999), DRO, P/F, V/S

14"x 49" TOS, FGV32 (1997)

NOTCHING MACHINES

1/4"x 8.6"x 8.6" EUROMAC, Hyd. Notcher w/Bending Attachment

PLASMA CUTTING MACHINES

100 Amp MESSER MG (2000), 6’x 10’, Hy-Definition, CNC plasma, Metalmaster II

PRESSES, OBI

40 Ton BROWN BOGGS, Air Assist Clutch

80 Ton ROUSSELLE, 8B-48, 48” x 22” Bed, OBI

80 Ton BROWN BOGGS, 18LJA, 2.5"stk, 30-50spm, 26"x 36"bed

PRESSES, STRAIGHT SIDE

800 Ton BLOW, SC2-800-96-60 (1998), 96"x 60" bed, 16"stk, 20-40spm, Like New!

PUNCHES, SINGLE STATION

25 Ton PIERCE-ALL

60 Ton FABMASTER (2011), Like new

PUNCHES, TURRET

22 Ton TRUMPF, TC2020R (2011), 50"x 100", Like New

25 Ton TRUMPF, TC500/1300, 50"x 100"

33 Ton AMADA, Vipros 358 King II, 58 Stn, Fanuc 18P

33 Ton STRIPPIT, FC1250-30-1500, Fanuc OP, 2 A/I

33 Ton AMADA, EMK 3610NT (2007)

50 Ton WIEDEMANN, Vectrum 5000, 72"x 60", 60" Throat, 54 Stn, tooling

ROLLS, ANGLE BENDING

2"x 2"x 3/16" "NEW" (Demo) TAURING, SAF DS 50HV, Hydraulic

2.2"x 2.2"x 1/4" TAURING, SAF DS 60 HV

6"x 6"x 1/2" PULLMAX, Z43, Hydraulic, Pendant Control, Digital Readout

ROLLS, PLATE BENDING

1.575"x 10" MG, Hyd, 4-Roll

1"x 10’ PULLMAX, PV7H, Hyd., 3-Roll Double Pinch

SANDERS

24" TIMESAVER, Series 2100 (2008), Wet

SAWS, BAND, HORIZONTAL

10"x 15" "NEW" ACRA, Speeder FHBS-250V

10.2" x 10.2" COSEN, C-260NC (2012), Fully automatic Horz, PLC Control

12"x 14" RAM, Semi-Auto

SHEARS, POWER SQUARING

10ga x 4’ ALLSTEEL, Hyd, FOPBG

1/4"x 10’ "NEW" ACCURSHEAR, No.625010

1/4"x 10’ NIAGARA, IF-10-1/4II, Hydraulic

1/4"x 10’ PEARSON, Hyd.

3/8"x 8’ ACCURSHEAR (1998), Hydraulic

MISCELLANEOUS

Barfeeder SPACESAVER, 4’ SMW, Autoload 12.65

Barfeeds LNS, Servo S3, (2007 & 2013) w/Remote pendant

Gundrill 3/4" x 30", ELDORADO

Spot Welder 20 KVA, SIP

Wire Machinery "NEW" METALEX, WT250, Wire Nibbler

NEW

Clue November, 2015

WE BUY SINGLE MACHINES OR COMPLETE PLANTS

63 Maplecrete Rd.Concord, Ontario L4K 1A5Tel: (905) 669-7507Fax: (905) 669-7512www.tradermachinery.com

HAAS, VF-1D, 2005, 20”X, 16”Y, 20”Z,Vert. Mach. Center, 15,000 rpm

93.5 Ton x 87”, TRUMPF, Trubend 5085, 2011, CNC Press Brake, Like New !

NEW Accupress CNC Hydraulic Press Brakesavailable from stock

TRUMPF, 5000 Watt, 5’ x 10’, 2005,Siemens 840D Control

22 Ton, TRUMPF, TC2020R, 2011,CNC Turret Punch, Like New !

HAAS, VF-4B, 2008, 50”X, 20”Y, 25”Z,5-Axis Vert. Mach. Center, w/Trunion Table

Clue November, 2015

Clue November, 2015

www.havlikgear.com

Introducing the FUT - TOS new generation

Leaders in gear manufacturing since 1886

Exclusive dealer for TOS Kurim

Havlik Gear (Head Office)455 Sheldon Dr., Cambridge, ON N1T 2B7, CanadaTel: (519) 624-6240 Fax: (519) [email protected]

FUT - TOS new generation

The machine is intended for machining of complex shaped work pieces by adopting the conventional technology and high speed cutting. Independent longitudinal and cross beds with a T-shape layout are the base of the machine. A longitudinal slide with a rotary, adjustable table travels along the longitudinal bed in the direction of the “X” axis. Column moves in the cross direction of the “Z” axis.The headstock moves on the guide surfaces of the column in the vertical direction of the “Y” axis.

MAIN MACHINE FEATURES• cutting-edge composite bed and column solution based

onaweldmentfilledwithaspecialconcretemix• considerable higher rigidity than in conventional struc-

tures• spindle with high torque and speed up to 6 000 rpm• high versatility of automatically interchangeable milling

heads• rapid feed rate 30 m/min• HSCmachiningfromfivesides• up to 6 contouring axis• versatile design and application • thermal stabilization of headstock and heads• long service life, accuracy and reliable operation

The FUT machine axis design goes beyond the industry and reached into the segment of horizontal boring machines where it stands out against other current manufacturers asitofferstopparametersregardingdynamicsandrigid-ity. This ensures higher labour productivity and accuracy of machined parts. The composite solution increasesdampening during machining processes, leading to longer service live of machines and the entire machinery.

Your Production Matters To Us

PROFILE ROLLS

PLATE ROLLS

PRESS BRAKES

FIBER LASER

PUNCH PRESS

PLASMA MACHINE

SHEARS

We offer innovative solutions to increase your productivity

ONTARIO - EASTERN CANADA3980 Chadburn CrescentMississauga, ON L5L 3X4Tel: 905-820-3232Fax: 905-820-3234

WESTERN CANADAWestside Service Ltd4406-58 St. SouthLethbridge, AB T1K7E2Tel: 403-380-5047Fax: 403-380-5048

FLEXIBLE COIL PUNCHING LINES

Quality | Service | Value | www.ferricmachinery.com

Clue November, 2015

Clue November, 2015

BARON-MAX MACHINING CENTRE BARON-MAX CNC TEACH-IN LATHE

MAXIMART BEDMILL

DRILLMASTER RADIAL DRILL

“SPECIAL PRICES”HEAVY DUTY LATHES

Special Pricing - Large InventoryAll New Milling Machines - Lathes & Surface Grinders

NEW MACHINES“From Stock”

S1600 - 5’3” ArmTF1280H - 50“ ArmTF1100 - 44” ArmTF900 - 36” ArmTF 750 - 30” ArmMXB5 - 47”x 23”x 24” Travel

7-1/2HP Inverter HeadManual or with Fagor 3-Axis CNC

26” x 120” x 4” Bore - 16” Wide Bed20” x 80” x 4” BoreAlso in Stock: 14“, 16”, 18”, 20“ & 22” Swing

42” x 24” x 24” Fagor Control32” x 20” x 20”

28” x 60” - 4” Bore, also 18” x 40”with Fagor CNC Control

POWERMASTER MACHINERY LTD.1048 Matheson Blvd. E. Mississauga, ON L4W 2V2

Tel: 905-624-9327 Fax: 905-624-8591e-mail: [email protected] website: www.powermaster.ca

OVER 30LATHES

IN STOCK

OVER 40MILLS

IN STOCK

2VS - 9”x49“ - R83VS - 10”x50“ - R84VS - 10”x54” - ISA40

Clue November, 2015

7040 Fir Tree Drive, Mississauga, ON L5S1K6, CanadaToronto Office: 905-676-9265 USA Office: 412-421-1211www.dipaolocnc.com [email protected]

USED MACHINERY

OTHER SERVICES» On-Site spindle taper grinding» Machine tool calibration and metrology» Mechanical, Electrical and CNC field service» Installations and plant moves» Spare parts including exchange programs» Authorized distributor for Heidenhain, Fagor, Fanuc FA, Siemens and Renishaw.» Certified Appraiser on staff» Way Grinding

Subscribe to our mailing list

Vertical LathesBERTHIEZ

SCHIESS

BULLARD

OKUMA + HOWA

62" table, 75" swing, Model TVM 125, 1997, Fanuc 15T, 95kw main spindle, Live tooling, tool and part probes, very heavy duty, Stock No. 407940” table, 55” swing, Model 14DKE100, updated electrics, fresh paint, Stock No. 4071Man-Au-Trol, 42” table, equipped with side head, from an aerospace facility, gently used, Stock No.4205ACT 2SP-V3, 10” chucks, twin spindle, Fanuc 0TT, 12 position turrets, 30HP spindles, Stock No. 4219

Horizontal Lathes“NEW”

“NEW”

MAZAK

RD&D

SAFOP

OKUMAHITACHI

MORI SEIKI

OKUMA+HOWA

SMTCL

DMG

20” x 60” manual lathe, 10” 3 jaw chuck, 14” 4 jaw chuck, 4” spindle bore, splash guard, steady rest, stock 403920” x 80” manual lathe, 10” 3 jaw chuck, 14” 4 jaw chuck, 4” spindle bore, splash guard, steady rest, 2 available, stock 4036 and 4037Slant Turn 40N-ATC Millcenter 1000, Fanuc Control64" x 170", sliding bed type gap lathe, 16" hole through spindle, GN10 CNC control, Stock No. 384963" x 236", C axis, live tooling on programmable turret, Siemens 840D CNC control, Stock No. 379115” x 36”, LU-15 CNC Lathe, 1995, Stock No. 358029” swing, Turret Lathe, 6.25” hole through, Stock No. 318327” x 35”, Model SL6, Fanuc 6T, 1981, equipped with tailstock, 12 station turret, Stock No. 417311” x 13” CNC Lathe, Model HJ-28, 18” swing, Fanuc 21iTB Control, 8 position turret, 2004. 2 Available. Stock 4156 & 4157HTC2050, 8”x20”, CNC turning center, FANUC control, tailstock, low hours, like new, 2010.CTX-410, 2008, 365mm turning diameter, 505mm swing, 66mm bar diameter, 1700 hours.

Surface & Blanchard GrindersFAVRETTO

ARTER

SHIBAURA

Model No. MG300 2T, Siemens CNC Control, 60” x 120” x 28”, two heads, reconditioned, you won’t find a nicer grinder on the market.Rotary Surface, Horizontal Spindle, Stock No. 3827

48”, Model No. KRT-8D, Blanchard Style, Stock No. 3684

MiscellaneousIEMCA

DANDREA

DO-ALL

AMADA

ARCHDALE

PRATT & WHITNEY

AMERICAN

PFAUTER

FLOOR PLATES

Bar feeder, 2.55" bar capacity, 3600mm bar length , Stock No. 4066

CNC facing head

Horizontal Bandsaw, Model C-916A, Stock No. 3466

Punch Grinder, Stock No. 3463

Granite Table, 150" x 150", Massive!, Stock No. 3418

Radial Drill, Stock No. 4211

Jig Grinder, Model No 20, Pratt and Whitney rotary table,

from an aerospace facility, gently used, Stock No.4215

Radial drill, 5’ arm, 17” column, 5MT spindle taper, power

quill travel, Stock No. 4237

Gear hobber, Model P900 Turbo, 36” max workpiece

diameter, 2.5 max DP, 24” axial travel, max hob 7-3/8” dia x

9” long, Auto hob shift, swing away tailstock, change gears,

Stock No. 4253

Various sizes

Machining CentresTOS

LEADWELL

BRIDGEPORT

BOSTOMATIC

12” x 51”, Model FV 25, FAGOR CNC control, box ways, priced to sell, Stock No. 3710

20” x 30”, Model MCV-760XL, FANUC 0 CNC Control, 20 position ATC, Stock No. 3453

20” x 40” CNC VMC, Model VMC1000/22, 6000 RPM, 40 taper, 1998, Stock 4159

32G Graphite VMC, 42K spindle, 4th axis.

Cylindrical GrindersSCHAUDT

B&S13” x 27”, Universal Heavy Duty, Stock No. 3826

10” x 48”, Brown & Sharp, Model 1048 Microstatic, Stock No.3825

Horizontal Boring MillsTOS

SCHARMANN

SUMMIT

WD130, 130mm spindle, Floor type boring mill, FAGOR 8055 CNC, 232” x 97” travel, 90” x 84” G&L table, linear scales, under power, Stock No. 4353

125mm spindle, Model Ecocut, Siemens 880 Ctrl, 3000 RPM, 50 HP spindle, built in CNC Facing head, 2 pallets, 50” x 63”

130mm Spindle, New in 1989, 79” x 72” table, good travels, facing head, pendant controls, good condition.

Milling MachinesHECKERT

DARBERT

16” x 63”, Model No. FSS 440 V1/2, Heavy Duty, Universal, Stock No. 3686

9” x 42”, Turret Style mill, Stock No. 3458

Clue November, 2015

Clue November, 2015

Latest Installation by FERRIC Machinery

Speed Bend 2100 x 100 Press Brake at Sprucelane Manufacturing, Wallenstein, ON

The choice for the FERRIC-ERMAK Speed Bend allows for flexible set ups for small part runs. Standard equipped with Y1-Y2 synchronized beam control and 2D, 3D and off-line programming software. It’s capable of importing dxf files and has the flexibility of the standard 4 axis back gauge (X,R,Z1-Z2) and CNC crowning allowing accurate, fast bending with a minimum input from the operator.

www.ferr icmachinery.com

All FERRIC products are sold with installation and training.Local service by our local FERRIC team.

For more information on the FERRIC-ERMAK products visit:

FERRIC Machinery Inc.3980 Chadburn Cres, Mississauga, ONTel: 905-820-3232 [email protected]

Westside Service Ltd.122 Broxburn Blvd, Lethbridge, AB

Tel: 403-380-5047 [email protected]

PAGE 30 CLUE, December 2013

AIR COMPRESSORS

JUN AIR 15 litre 120psi

QUINCY 5hp

DEVILBISS 5hp

CAMPBELL HAUSFELD 5hp 20 Gallon

DRILLS

BUFFALO

ALLEN drill press, 3ph

DoALL Gearhead drill, swivel

ARBOGA (G1304) Bench top drill

HERBERT 15" 3ph

CINCINNATI BICKFORD 24"

FORK LIFT TRUCKS

TCM 5000 lb propane, 4 stge mast, side shift

NISSAN 5000lb propane, 3 stg mast, side shift

TCM 10000 lb Propane, 3stge mast

Assorted Pallet Trucks

HYSTER 15000 lb propane, 3stge mast, side

shift

GRINDERS

BALDOR 3/4hp pedestal grinder

THOR Pedestal grinder

JONES & SHIPMAN Surface Grinder 540,

550v, 3ph

LATHES

CHIEN-YEH 14"x 36" 24" gap

TOS (SV18RA) 15"x 60"

COLCHESTER 16"x 60"

VOEST 17"x 60"

MILLS

HONEYWELL Light curtains

BRIDGEPORT (J series) 9"x 32"

FIRST (LC-20VSG) 10"x 51" 40 taper

TOS (FA3AV) 12"x 54" 40 taper

PRESSES

ARBOR (#2)

GREENERD (#3a) Arbor Press

JET (#3) Arbor Press AP3

ALGOMA 50T H Press, 575v, 3ph

BUFFALO 100T H press

ROLLS

B&B 36" x 18ga Hand Rolls

SAWS, BAND, HORIZONTAL

WELLS (V-12)

WELLS (W-9) Semi-automatic

COSEN

CRAFTEX 10" table saw

SAWS, BAND, VERTICAL

RIGID (MS1065LZA) 10" compound mitre saw

CLIPPER (BBC156) 14" Concrete saw

MAKITA 14" Chop saw, single phase

MEP (Rabbit 351) 14" Cold cut saw

WILSON 28" Vertical Woodworking band saw

WELDERS

MILLER (650) Mig welder w/ double feeder

AERCOLOGY’S WELDAIR (WA1000CP)

Smoke eater

THERMAL ARC (PAK 5Xr) Plasma cutter

MILLER (Coolmate 4) Water cooler

ARCWELD (G022263) 230/460/575

Smoke Eater, NEDERMAN

LINCOLN (CV-300)

THERMALARC (250 Tigwave)

CANOX Arc Welder

L-TEC Heliarc 250hf plus squarewave

MILLER (Big 50) Diesel welder, 400 amp

MILLER (D302) 3+12 Diesel welder

MEMCO (Stick AC-225) single phase

MISCELLANEOUS

Assorted Transformers

Hydraulic Pump

Industrial Fan, VARY 4’ x 4’

MITUTOYO height gauges, assorted sizes

Wet Soda Blaster 38 x 41 x 38

Assorted Rotary Tables

Mag. Lathe Chuck, ECLIPSE

Belt sander, KALAMAZOO 6" Pedestal

Hone machine, SUNNEN w/ tooling

Assorted Demagnetisers

HILTI (DXA40 driver) w/ XHN date stamp

attachment

Bead Rolling Machine, CMZ7, 114v, single ph.

Pressure Washer, PSC 600v, 3ph

Assorted Measuring Tools

Belt Sander, BROOK HANSEN 6"x 80"

Pipe Vise Stands, (2) PILOT (No.20)

Angle Plates

Torque Wrench, PROTO 600 ft/lbs

Collet sets

Assorted vises

Assorted Chain Hoists

Tri Vise, RIGID

Magnets, 800-1000kg

Air Hoist 2T

Hardness Testers

JET & CM 10T chain falls, 20’ lift

Bore Gauge, SUNNEN (Dial)

Tri Vise, RIGID

RIGID Tooling for threading machine

Phone: 905-634-8442 Fax: 905-681-69404280 Harvester Road, Unit 5 & 6, Burlington, Ontario, L7L 5Z5

www.paulmachinery.com

Clue November, 2015

Clue November, 2015

MODERN TOOL BC LTD.

New & Used Equipment, Machinery Sales | Toll-Free: 1-800-717-1440

Modern Tool BC LTD. offers an extensive line-up of new and used machine tools, fabricating, sheet metal, and production machinery.

1385 Kingsway Avenue, Port Coquitlam, BC V3C 1S2 | (604) 472-1444 | Toll Free: 1-800-717-1440

DURMA AD-R37175 CNC Hydraulic Press Brake

HYD-MECH S-20A IIIAutomatic Band-Saw

Need your equipment serviced? Our service department is available from Monday to Friday 9am to 5pm

On the web @ www.moderntoolbc.comFollow us on Twitter @ModernToolBC

Service & Parts Sales | Toll-Free: 1-800-717-1440

SCOTCHMAN 6509-24MHydraulic Ironworker

DURMA PBH-180Profile Bending Machine

SYLVAIN TREMBLAY MACHINERY

Milling, EAST-LION, with C-TEC Ctrl, 12”x 60”, CNC 3 AXIS, $9,500

TARNOW Lathe, TUJ50MX2000,1995, Fully Equipped, DRO

Hyd. shear ELITE 1/4'' X 10',Mot. back gauge, secured, 2008

KONE 50TM (2 x 25TM) X 45', Mint Condition

2 x 7.5 TM hoist KONE

CLEARANCE SALE, MUST BE SOLD

Hyd. plate roll DAVI, 3/16” X 10', 2002 Roto-Die 10', model 10,mint condition

Hyd. press brake ELITE, 175T X 13', CNC back gauge, tooling,

secured, 2008

Lift truck KALMAR, P100BX,8900 Lbs, 174'', side shift

Contact: Sylvain Tremblay • Cell: (819) 314-4967 • [email protected]

ALL MACHINES

REVISED DOWN

Clue November, 2015

B1804 BENDERS, HYDRAULIC

5-1/2" ENERPAC, , Hyd. Pipe bender, w/assisted tooling,

(Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

B6985 BRAKES, HAND

16ga X 10’ BROWN & BOGGS, , $3,000, (Machine Solutions

Inc. Tel: 416-220-5910 See Page 1

B7000 BRAKES, PRESS

15 Ton x 4’ CHICAGO, , Mechanical, $1,900, (Machine

Solutions Inc. Tel: 416-220-5910 See Page 1

20 Ton x 4’ ALLSTEEL, , Hydraulic, $5,500, (Machine Solutions

Inc. Tel: 416-220-5910 See Page 1

35 Ton x 6’ DIACRO, 14-72, Hydra-Mechanical, Front Op.

Manual Gauge, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

35 Ton x 6’ TRI-ACRO, 35-6 (1993), Hydra-Mechanical, Hurco

5C, Ref# 10204, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

45 Ton x 4’ “NEW” ACCURPRESS, S4504, CNC, Y, X, R,

Crowning, Laser safety, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

55 Ton AMADA, FBDIII5020NT (2000), “Up-Acting” 7-Axis NT

Control, Ref# 10355, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

55 Ton AMADA, RG50 (1999), Hurco Autobend 7, 2-Axis, Ref#

10354, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,

Fax: 845-398-0074) See Page 22

55 Ton x 6’ PACIFIC, Hurco CNC, Single-axis, (Trader

Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)

See Page 4

60 Ton x 8’ ACCURPRESS, 7608, 2-Axis CNC, Light curtains,


Fax: 905-669-7512) See Page 4

70 Ton x 10’ ALLSTEEL, , Hyd., (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

72 Ton TRUMPF, Trubend 3066 (2008), 4-Axis, 2700 Hours,

Ref# 10286, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

75 Ton x 10’ “NEW” ACCURPRESS, , CNC, (Trader Machinery

Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

88 Ton AMADA, FBDIII8025NT (2001), AMNC-PC, Ref# 10340,

(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,

Fax: 845-398-0074) See Page 22

88 Ton AMADA, HDS8025NT (2008), Ref# 10244, (Jordan

Craig Machinery Int’l Inc Tel: 845-398-0073,

Fax: 845-398-0074) See Page 22

88 Ton AMADA, RG80 (2000), NC 9EXII 3-axis, Ref# 10033,


Fax: 845-398-0074) See Page 22

88 Ton AMADA, Astro 100M (2001), FBDIII-8025, Sold NEW in

2004, Ref# 10192, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

88 Ton x 8’ AMADA, FBDIII-8025NT (2000), AMNC-PC-7 Axis

touch screen, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

88 Ton x 98.6" AMADA, FBD 8025F (1992), “Up-Acting”, NC9F

Control, Ref# 10356, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

90 Ton CINCINNATI, 90CB8 (1981), Hurco Autobend 7 (2)Axis

CNC, Ref# 10328, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

93.5 Ton x 87" TRUMPF, Trubend 5085 (2011), 6-Axis, Like

New, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

93.5 Ton TRUMPF, Trubend 5085 (2011), 6-Axis BG, Ref#


Fax: 845-398-0074) See Page 22

93.5 Ton TRUMPF, Trubend 5085 (2011), 6-Axis BG, Ref#


Fax: 845-398-0074) See Page 22

95 Ton TRUMPF, Trumabend V85 (2000), Delem DA65 CNC,

Prog. Z1,Z2, Ref# 9975, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

110 Ton AMADA, Astro 100NT (2004), HDS1030, Robotic

bending cell, Ref# 10203, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

110 Ton x 8’-6’ “NEW” FERRIC, , Ferric PB Pro Falcon

2600x100, XR Back gauge, CNC crown, 2D graphic, (Ferric


See Page 7

110 Ton x 10’ HACO, PPM 30100, CNC, 2-Axis ATL500,


Fax: 905-669-7512) See Page 4

110 Ton x 13.5’ GASPARINI, EFB 4100x105, XR Backgauge,

CNC Crown, DNC angel prog., (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 7

120 Ton x 12’ ALLSTEEL, , Hurco CNC, $18,000, (Machine


130 Ton x 10’ “NEW” ACCURPRESS, , CNC, (Trader


See Page 4

137 Ton AMADA, HFB1254/5, NEW 1995, Operateur CNC,

165", Ref# 10214, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

138 Ton AMADA, FBD1253NT (2004), Up-Acting CNC, Ref#


Fax: 845-398-0074) See Page 22

138 Ton x 10’ AMADA, FBDIII-1253NT (2001), AMNC-PC-7

Axis touch screen, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

143 Ton AMADA, HDS-1303NT (2005), AMNC-PC 8-Axis, Ref#


Fax: 845-398-0074) See Page 22

143 Ton x 10’ AMADA, HDS-1303NT (2005), Servo Hyd. Hybrid

CNC, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

144 Ton TRUMPF, V130X (2002), 6-axis BG, EX-Stroke

Clamping, Crowning, ACB, Ref# 9976, (Jordan Craig

Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)

See Page 22

148 Ton x 10’ BYSTRONIC, 3100 x 130, 6 axes back gauge,

Hyd clamping, with tooling, (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 7

150 Ton x 10’ “NEW” FERRIC, Speed Bend 3100x135, XRZ1Z2

back gaug, CNC crown, 2-3D prog. off line software, (Ferric


See Page 7

165 Ton BYSTRONIC, XPERT 150 X 3100 (2012), 8-Axis CNC,

Integrated Crowning, Ref# 10353, (Jordan Craig Machinery

Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)

See Page 22

165 Ton x 12’ HACO, ERM 36150, X-39’, Man Crown, BC55 2D

graphic, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 7

170 Ton x 12’ VERSON, , Mechanical, (Machine Solutions Inc.

Tel: 416-220-5910 See Page 1

175 Ton x 12’ ACCURPRESS, Advantage 717512 (2004),

ETS3000 3-Axis, Ref# 10273, (Jordan Craig Machinery Int’l


175 Ton x 12’ “NEW” TOSKAR, , CNC 4-axis Touch graphic

Manual crown tooling, quick release clamping, (Machine


190 Ton TRUMPF, V170 (2000), Delem, Prog. Z1, Z2,

Crowning, Clamping, Ref# 10013, (Jordan Craig Machinery

Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)

See Page 22

PAGE 16 CLUE, November, 2015

CLASSIFIED - LISTING YOUR MACHINERY AND EQUIPMENT TODAY

LEADS TO SUCCESSFUL SALES TOMORROW

Don't Delay! Phone: (905) 528-7765 Fax: (905) 917-0222

Contact: Gilles Lupien

Email: [email protected]: 819-478-5266Cell: 819-473-2902

Website: www.machinerygl.com

(Only 12,781 Hr. Cutting Time.)Model : MX-45 VAE

Control : OSP 7000M (4 Axis) • 12,000 rpm • Table : 40’’X20’’ • XYZ : 30’’X19’’X18’’ • Inc:

Coolant trough, Chiller, Chip Conv., Full enclosed guards, Lock doors device.

Low Price at : $37,500.00

Okuma VMC, Pallet Changer

4 Axis, Dual Chuck, Dual Turret Turning Center • Model : LFS15-2SP • Year 1999

Only 7,875 Hr. Cutting time • Control : OSP U100L • Chuck Size : 8’’ • Spindle Nose: ASA,

A2-6 15HP • 4,500 RPM.

Low Price at : $54,500.00

Okuma Robusturn Twin Spindle

Pricedto Move

Clue November, 2015

CLUE, April 2014 PAGE 17

B7000 BRAKES, PRESS I6200 IRONWORKERS

193 Ton x 10’ “NEW” FERRIC, , PB Pro Falcon 3100x175, XR

Back gauge, CNC crown, 2D graphic, (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 7



Tel: 877-337-7424, Fax: 905-820-3234) See Page 7



See Page 4

220 Ton x 13’ ERMAK, CNCAP, XR back gauge, Manual crown,

tooling, laser, Fasfold Gr control, (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 7

220 Ton x 13’ FISHER, , XR BG, CNC Crown Cybelec DNC900

control, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 7

242 Ton ERMAK, Powerbend 12X220 (2011), Cybelec DNC

600S, Ref# 10344, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 22



Tel: 877-337-7424, Fax: 905-820-3234) See Page 7

245 Ton x 14’ HACO, ERM 42225, X back gauge Man Crown,

BC40 Angle prog., (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 7



See Page 4

257 Ton TRUMPF, Trumabend V230 (2003), Delem DA69

6-axis, Clamping, Crowning, ACB, Ref# 9977, (Jordan Craig


See Page 22

257 Ton TRUMPF, Trumabend V230X (2003), Delem DA69

6-axis, Clamping, Crowning, ACB, Ref# 9980, (Jordan Craig


See Page 22

300 Ton x 10" CINCINNATI, 300H Series, Hyd., (Trader


See Page 4


Back Gauge, CNC Crown, 2D graphic, (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 7

40-400 Ton x 5-16’ “NEW” TOSKAR, , Hydraulic, (Machine


400 Ton x 17’ CINCINNATI, , Mechanical, (Machine Solutions

Inc. Tel: 416-220-5910 See Page 1

600 Ton x 16’ ALLSTEEL, , Hydraulic, $27,000, (Machine


1750 Ton PACIFIC, Fabri-K 1750-40/36 (2007), Cybelec 8805,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

D5700 DRILLS, RADIAL

3’ Arm SUNLIKE, , 1500rpm, w/work table, (Trader Machinery


64" x 5MT TOS, VR5, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 8

F5006 FURNACES

Heat Treating , New & Reconditioned, Powered by Electric,

Gas, Oil, Propane, for all purposes, (Park Thermal

International Tel: 905-877-5254, Fax: 905-877-6205)

G8025 GRINDERS, SURFACE, RECIPROC

8"x 18" FREJOTH, , Automatic, Hyd., (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

8"x 20" JONES & SHIPMAN, , $1,900, (Machine Solutions Inc.

Tel: 416-220-5910 See Page 1

8"x 24" TOS, BRH20, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 8

10"x 20" CHEVALIER, , (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 8

G9030 GRINDERS, MISCELLANEOUS

10"x 25" TOS, BU28-630, Cylindrical, (Powermaster Machinery

Ltd Tel: 905-624-9327, Fax: 905-624-8591) See Page 8

H6004 HONES

SUNNEN, , MBC-1804M & MBC-1802MR, Power Stroke, Horiz.,


Fax: 905-669-7512) See Page 4

SUNNEN, MBB-1660K, Manual, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

SUNNEN, MBB-1650, Manual, Asst’d Tooling & Cabinet, (Trader


See Page 4

I4775 PRESSES, INSERTION

8 Ton PEMSERTER, Series 2000 (2002), PLC control, (Trader


See Page 4

I6200 IRONWORKERS

50 Ton “NEW” FERRIC, HIW 45, Single Operator, 5 Stations,

(Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 7

60 Ton “NEW” FERRIC, HIW 60 DC, Dual operator, 5 stations,


Fax: 905-820-3234) See Page 7

65 Ton “NEW” FERRIC, HIW 60, Single operator, 5 stations,


Fax: 905-820-3234) See Page 7

75 Ton KINGSLAND, 75XS, Dual operator, 5 stations, (Ferric


See Page 7

80 Ton “NEW” FERRIC, HIW 80 DC, Dual operator, 5 stations,


Fax: 905-820-3234) See Page 7

Clue November, 2015

I6200 IRONWORKERS L3000 LATHES, ENGINE

PAGE 18 CLUE, April 2014

100 Ton “NEW” FERRIC, HIW 100 DC, Dual operator, 5

stations, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 7

125 Ton “NEW” FERRIC, HIW 125 DC, Dual operator, 5

stations, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 7

55 Ton to 120 Ton “NEW” DURMA, , (Machine Solutions Inc.

Tel: 416-220-5910 See Page 1

100 Ton OMERA, , Mechanical, $3,900, (Machine Solutions Inc.

Tel: 416-220-5910 See Page 1

L0850 LASERS

1500 Watt AMADA, LC1212XL (1995), 4’ x 8’, Rebuilt 2012,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

2000 Watt “NEW” FERRIC, Fibermak, 60 x 120, Beckhoff

control, Lantek Expert, (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 7

2000 Watt AMADA, LC1212A3XL (2004), 4’ x 8’, 17,000 hours,

New turbo blower, Ref# 10175, (Jordan Craig Machinery Int’l


2000 Watt SALVAGNINI, L3 Fiber (2011), 5’x 10’, Ref# 10255,


Fax: 845-398-0074) See Page 22

2000 Watt TRUMPF, L2510 (2005), Load/Unload Cell, Ref#


Fax: 845-398-0074) See Page 22

2KW TRUMPF, L2030 (2007), 4’x 10’, Low hours, Ref# 10237,


Fax: 845-398-0074) See Page 22



Tel: 877-337-7424, Fax: 905-820-3234) See Page 7

3000 Watt “NEW” FERRIC, Fibermak, 78 X 160, Beckhoff


Tel: 877-337-7424, Fax: 905-820-3234) See Page 7

3000 Watt TRUMPF, L2530 (1999), 4’x 8’, Siemens, 9483

Beam on hours, Ref# 9753, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

3000 Watt BYSTRONIC, BySprint Fiber 3015, Installed New:

2013, Ref# 10253, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

3.2 KW TRUMPF, L2030 (2007), 5’x 10’, Auto Loader/Unloader,

New Res. 2013, Ref# 10351, (Jordan Craig Machinery Int’l


3200 Watt TRUMPF, TCL-3030 (2001), 5’x 10’, Ref# 9914,


Fax: 845-398-0074) See Page 22

3500 Watt TANAKA, TF-3500B (1996), 8’ x 95’, Fanuc 16L,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 22



Tel: 877-337-7424, Fax: 905-820-3234) See Page 7

4000 Watt AMADA, FO MII RI 3015 (2012), 5’x 10’ Rotary

Index, Ref# 10320, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

4000 Watt TRUMPF, Trulaser (2006), 5’x 10’, 22,000 Beam on

hours, Ref# 10325, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

4000 Watt AMADA, Gemini FO-3015NT (2004), 5’x 10’, New

Turbo Blower, Ref# 10346, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

4000 Watt TRUMPF, Trulaser 3040 (2011), 80"x 160", Dual

Pallet, Ref# 10260, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

4000 Watt AMADA, Gemini FO4020 (2003), 80"x 160", Dual

Pallet, Ref# 10262, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

4000 Watt MAZAK, Hypergear 510 (2006), Installed New:2008,

Less than 8500hrs, Ref# 9707, (Jordan Craig Machinery Int’l


4000 Watt AMADA, Pulsar 2415NTA4 (2010), 8,500hrs, Ref#


Fax: 845-398-0074) See Page 22

4400 Watt BYSTRONIC, Bystar II4020 (2006), 80"x 160",

Bytrans Load/Unload system, Ref# 10339, (Jordan Craig


See Page 22

5000 Watt TRUMPF, L3050 (2005), 5’ x 10’, (Trader Machinery


5 KW TRUMPF, Trulaser 3030 (2010), 5’x 10’, Liftmaster,

Approx. 5000 Beam on hrs, Ref# 10352, (Jordan Craig


See Page 22

5000 Watt HK, FL-3015 (2011), 5’x 10’, Ref# 10259, (Jordan

Craig Machinery Int’l Inc Tel: 845-398-0073,

Fax: 845-398-0074) See Page 22

5200 Watt BYSTRONIC, Byspeed 3015 (2005), 5’x 10’, Ref#


Fax: 845-398-0074) See Page 22

6000 Watt TRUMPF, Trulaser 5030 (2008), Liftmaster, Ref#


Fax: 845-398-0074) See Page 22

6KW AMADA, LC-3015F1NT (2011), 5’x 10’, Dual Pallet, Ref#


Fax: 845-398-0074) See Page 22

MAZAK, FMS-A48-12 (2004), 6 Shelf loader, Ref# 9720,


Fax: 845-398-0074) See Page 22

L2150 LATHES, CNC

OKUMA ROBUSTURN, LFS15-2SP (1999), Twin Spindle,

4-axis, Dual chk, Dual Turret turning center, $54,500,

(Machinerie Gilles Lupien Tel: 819-478-5266,

Fax: 819-478-5266) See Page 16

L3000 LATHES, ENGINE

12"x 36" LOGAN (by Powermatic), 2557 VLH, Variable speed, 3

& 4 jaw chucks, collets., (Brighton Machinery Sales Inc

Tel: 519-485-7089, Fax: 519-485-7368)

13"x 40" STANDARD MODERN, , (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 8

14"x 40" TOS, SN32, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 8

14"x 40" JIMT, JIMT360, Toolroom, 10" chk, (Trader Machinery


16"x 40" ACRA, , DRO, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 8

17"x 60" COLCHESTER, Mascot, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 8

18" x 60" “NEW” POWERTURN, 460, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

18"x 80" DARBERT, , (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 8

22"x 60" CHIEN YEH, , (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 8


Tel: 905-624-9327, Fax: 905-624-8591) See Page 8


Tel: 905-624-9327, Fax: 905-624-8591) See Page 8

63"X 106" BOKO, D82H, Semi-Automatic Spinning lathe,


Fax: 905-669-7512) See Page 4

1-589 Middle�eld Rd, Toronto ON M1V 4Y6Phone: 416-291-9499 Fax: 416-291-4990Email: [email protected]: www.compumachine.ca

Toshiba BTD 9R CNC Boring Mill with Rotary table

Great capacity low price20hp, Vert Travel Of Headstock, Y-39.4",X-48", Spindle Travel, W-20" SaddleTravel Z-35.4", Built-In Pwr Rotary Table35.4" x 41.3", Capacity 5,510.lb

Toshiba BTD 11B P4 CNC Boring Mill Plain Table

Big Capacity 98" table low priceX-98”, Y-59”, Z-62”, W-24”, Table size 98”x 59”, Table load Capacity 17,000lb, Spindle diameter 4.3”, Spindle speeds 1600rpm, Spindle motor 20/30hp

Toshiba TMC 13-3 CNC, VBM w/Live spindle and C axis

Table Diameter: 49.2", Max Swing: 63", Max. Turning Dia: 63", Max Turning Height: 49.2", Max Table load – turning – (milling) 22,000 LBS (15,000LBS), Table RPM 3~250, Table Motor 40/50 HP, Cross Rail Stroke (4) positions 19.7”- 49.2”. ATC 24 Live spindle:, 20 HP (1,500 RPM)New Fanuc 0i-TD CNC Control with warranty.TOSHIBA SALE

CNC Machining Centers2001 Deckel Maho Gildemeister (DMG) DMU-70 Evolution 5-Axis

VMC with Heidenhain TNC 430 Control1990 Mazak VQC 15/40 with Mazatrol M32, Table 16” X 35”, X-22”,

Y-16.1”, Z-15”, 6000rpm2000 Daewoo Mynx 500 Fanuc 21-M Control, Table size 49”x20”

X-40”, Y-20”, Z-20” 6000rpm ATC 241992 Hermle UWF 851 H CNC Univ Milling Mach, Heidenhain 415

CNC Control, X-600mm Y-450mm Z-400mm, 20-4500rpm1993 Enshu 500H CNC Horiz Mach Center Fanuc 16-M Ctrl, Two

Pallet auto changer 20” pallets, X-28” Y-25.6” Z-23.6”, 20-6000rpmCNC Lathes1981 VDF Boehringer 800 3m centers Fanuc 6T Control1981 VDF Boehringer 820 3m centers Fanuc 6T Control1983 VDF Boehringer 800 3m centers Fanuc 0T ControlCNC Boring Mills1996 Toshiba BTD 110 R16 2m x axis, 1500mm Y axis. Rotary

table 55”x63”, ATC 38 Tosnuc 888 ControlBoring Mills2001 Tos W100A Horizontal with Heidenhain 3 axis DRO

Union Floor Type Horizontal, BFP 125 Accurite 3 axis DRO Spindle Diameter 5”, 12 Ton Rotary table and floor platesEngine lathesMerli Clover 24” swing, 80” centersGiana Torgim. 32” swing, 140” centers 15” chuckChien Yeh 14” swing 60” centers 8” chuckMilling machines Dah- Lih: DL-VHRU-G2, 10” x 48” table, 40 taper (vert. & horiz.),

133-2160 rpm (belt)- vert., 50- 750 rpm (belt)- horiz.. c/w x- axis power feedPresses60 Ton Hydraulic H frame pressFork liftsElectric Lift- Truck: Clark; E-C 500, 5000 lb. capacity, 188” lift. c/w battery charger.GrindersKarstens CNC Universal Cylindrical Grinder, 12” magnetic chuck,

24” swing, 60” centers, Universal Swivel grinding wheel, George Karstens CNC Control

Clue November, 2015

L6135 LATHES, N/C & CNC P6100 PRESSES, OBI

L6135 LATHES, N/C & CNC

OKUMA, LNC-8 (1997), OSP-700, 10" chuck, 15.75" Max Sw, 2"

Bar cap, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

HAAS, SL20T (2005), (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

MORI SEIKI, SL150S (1997), (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

MORI SEIKI, NL3000/1250 (2007), MSX850 II Control, C&Y

Axis Milling, 10"Chk, Live holders, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

MORI SEIKI, NL2500/700 (2006), MSX850 Control, 10"Chk, live

holders, C&Y Mill cap, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

12"x 40" HYUNDAI, HIT-30-S (1995), Seimens 840C, Over Bed

20", Mint cond., (Machinerie Gilles Lupien

Tel: 819-478-5266, Fax: 819-478-5266) See Page 16

22"x 78.7" TOOLMEX, TUR560MN-2000 (2012), Siemens

840D, 16" Chk., (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

24.8"x 118" TOOLMEX, TUR630AMN-3000 (2008), Siemens

840D, 16” Chk., (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

M0130 MACHINING CTRS, HORZ

OKUMA, MX-60HB (1997), X-39.37" Y-31.5" Z-31.8", OSP7000,


Fax: 905-669-7512) See Page 4

M0185 MACHINING CTRS, VERT

HAAS, VF1 (2005), X-20" Y-16" Z-20", 15,000 rpm, (Trader


See Page 4

BRIDGEPORT, Torque Cut, 22"x 16"x 20", (Powermaster

Machinery Ltd Tel: 905-624-9327, Fax: 905-624-8591)

See Page 8

OKUMA, MX-45 VAE, X-30" Y-19" Z-18", Table 40"x 20", Pallet

changer, 4-axis, $37,500, (Machinerie Gilles Lupien

Tel: 819-478-5266, Fax: 819-478-5266) See Page 16

TONGTAI SEIKI, TMV-850A (2007), X-33.5" Y19.7" Z-20.9",


Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

MAKINO, S56 (2007), X-35.4" Y-19.7" Z-17.7", Professional 5

CNC, 13,000 rpm, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

HAAS, VF-4B (2008), X-50" Y-20" Z-25", 5-Axis, TR210 Trunion

Table, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

M0850 MEASURING MACHINES

SHEFFIELD, Cordax D-28 (2009), Discovery III, Ref# 9855,


Fax: 845-398-0074) See Page 22

M1550 MILLS, CNC

SUPERMAX, , Knee type Centroid CNC, (Powermaster

Machinery Ltd Tel: 905-624-9327, Fax: 905-624-8591)

See Page 8

JAFO, , Ram Type, Heidenhain, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 8

M1659 MILLS, UNIVERSAL

10"x 50" TECHLEADER, , 5hp, 2 axis read-out, powerfeed, $5,

500, (Machine Solutions Inc. Tel: 416-220-5910 See Page 1

10"x 50" FIRST, , Horz/Vert, DRO, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 8

M2824 MILLS, VERTICAL

10"x 52" DELTA, V/S, 3-Axis DRO, P/F X,Y,Z, Asst’d Holders &

Tooling, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

14"x 49" TOS, FGV32 (1997), (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

N5230 NOTCHING MACHINES

1/4"x 8.6"x 8.6" EUROMAC, , Hyd. Notcher w/Bending

Attachment, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

1/4" x 8.6"sq “NEW” FERRIC, , variable angle, (Ferric Machinery


O7397 OVENS

New & Reconditioned , Powered by Electric, Gas, Oil,

Propane, (Park Thermal International Tel: 905-877-5254,

Fax: 905-877-6205)

P2135 PLASMA CUTTING MACHINES

100 Amp MESSER MG, (2000), 6’x 10’, Hy-Definition, CNC

plasma, Metalmaster II, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

P6100 PRESSES, OBI

40 Ton BROWN BOGGS, , Air Assist Clutch, (Trader


See Page 4

60 Ton BLISS, C-60, 4"stk, A/C, (Brighton Machinery Sales Inc

Tel: 519-485-7089, Fax: 519-485-7368)

75 Ton TOLEDO, , Air Clutch & Brake, 5"stroke, (Brighton

Machinery Sales Inc Tel: 519-485-7089, Fax: 519-485-7368)

80 Ton BROWN BOGGS, 18LJA, 2.5"stk, 30-50spm, 26"x

36"bed, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

CLUE, April 2014 PAGE 19

British Columbia

Masteel, Delta (Mary) ............................................................................604-952-4434...........604-952-4432...........14

Modern Tool (BC) Ltd, Port Coquitlam (Pam)........................................604-472-1444...........604-472-1455...........15

Manitoba

Empire Machinery & Tools, Winnipeg (Rick) .........................................800-665-8089...........204-779-7796...........12

Ontario

Brighton Machinery Sales Inc, Ingersoll (Brian) ....................................519-485-7089...........519-485-7368...........16

Compumachine Canada, Toronto (Peter)..............................................416-291-9499...........416-291-4990...........18

Corporate Assets Inc, Toronto (Marketing)............................................416-962-9600...........416-962-9601.............9

DiPaolo Machine Tools Ltd., Mississauga (Nelson) ..............................905-676-9265...........905-676-9436...........10

Fabtec Machine Tool Solutions Inc, Oakville (Raj) ................................905-469-1586...........905-469-3054...........17

Ferric Machinery Inc, Mississauga (Koen) ............................................877-337-7424...........905-820-3234.............7

Havlik Int’l Machinery, Cambridge (John) ..............................................519-624-6240...........519-624-4119.............6

L S Walker Machine Tools Inc, Milton (Chris) ........................................905-876-0890...........905-876-1959...........21

Machine Solutions Inc., Guelph (Andrew) .............................................416-220-5910...............................................1

Park Thermal International, Georgetown (Sales) ..................................905-877-5254...........905-877-6205...........19

Paul Machinery, Burlington (Paul) .........................................................905-634-8442...........905-681-6940...........13

Powermaster Machinery Ltd, Mississauga (Peter)................................905-624-9327...........905-624-8591.............8

S K Braly Machinery Inc, Mississauga (Steve)......................................905-793-8080...........905-793-2190...........20

SMTCL Canada Inc., Oakville (Merry)...................................................905-829-1579...........905-829-8692...........24

Stevens Machinery Sales (2005) Inc, Toronto (Andrew).......................416-798-3611 ...........416-798-8439.............2

TOS Trade Canada Inc., Milton (Marian) ..............................................905-878-0888...........905-878-9022.............3

Trader Machinery Inc, Concord (Jonathan)...........................................905-669-7507...........905-669-7512.............4

QC

Machinerie Gilles Lupien, Drummondville (Gilles).................................819-478-5266...........819-478-5266...........16

Machinery S. Tremblay, Drummondville (Sylvain).................................819-477-6677...........819-477-6466...........15

USA

Jordan Craig Machinery Int’l Inc, New City, NY (Jordan) ......................845-398-0073...........845-398-0074...........22

Machinery Network, Los Angeles, CA (Gary)........................................818-788-2260...........310-826-2320...........23

COMPANY PHONE FAX PAGE

ADVERTISERS DIRECTORY

OvensFor Powder Coating, Aging,

Stress Relief, Normalizing

Gas or Electric

Numerous Sizes Available

Call: 905-702-4644

Clue November, 2015

100 Ton CKD HRONOV, , TYP: LEND 100, A/C, Variable

Stroke Length, Command stamp ctls, (Brighton Machinery

Sales Inc Tel: 519-485-7089, Fax: 519-485-7368)

110 Ton NIAGARA, Model: A 5 1/2, 6" Stroke, Mech. Clutch

w/air assist, (Brighton Machinery Sales Inc

Tel: 519-485-7089, Fax: 519-485-7368)

P7100 PRESSES, STRAIGHT SIDE

800 Ton BLOW, SC2-800-96-60 (1998), 96"x 60" bed, 16"stk,

20-40spm, Like New!, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

P9050 PUNCHES, LOAD/UNLOAD

AMADA, MP1225NJ (2006), Automatic Load/Unloader, Ref#


Fax: 845-398-0074) See Page 22

AMADA, MP1225NJ (1998), Automatic Load/Unloader, Ref#


Fax: 845-398-0074) See Page 22

P9150 PUNCHES, SINGLE STATION

25 Ton PIERCE-ALL, , (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

60 Ton FABMASTER, (2011), Like new, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

P9275 PUNCHES, TURRET

19 Ton TRUMPF, Trupunch 1000 (2007), Only 3109hrs, Ref#


Fax: 845-398-0074) See Page 22

20 Ton TRUMPF, Trumatic TC3000L (2007), 2KW Truzx 2000,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

22 Ton WIEDEMANN, 2044 (2001), 30 Sta, 2 A/I, 114 Style,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

22 Ton TRUMPF, TC2020R Bosch (2011), 50"x 100", Approx.

3100hrs, Ref# 10321, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

22 Ton AMADA, Apelio III 2510VL (2001), Fanuc 160 IL, 2KW

Laser, Under Amp, Ref# 9458, (Jordan Craig Machinery Int’l


22 Ton FINN POWER, F5-20 (2000), 60"x 80", 20 Station,

Thick Style, Ref# 10266, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

22 Ton TRUMPF, TC2020R (2011), 50"x 100", Like New,


Fax: 905-669-7512) See Page 4

22 Ton AMADA, Vipros 255 (1997), Fanuc 18P, 31 Sta., 3A/I,

Ball Table, Ref# 9801, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

22 Ton AMADA, Vipros 255 (1999), Fanuc 18P, 31 Sta., 3A/I,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

22 Ton AMADA, EM2510NT (2004), AMNC NT CNC, 50"x 100",

Servo driven, Ref# 10220, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

25 Ton TRUMPF, TC6000L 1600 (2010), Laser/Punch,

Sheetmaster, Ref# 10191, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

25 Ton TRUMPF, TC5000R-1600 (2005), New linear amplifier,

14,039hrs, Ref# 10159, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

27.5 Ton TRUMPF, TC500R Bosch CNC (1993), 18 Station

Rotation, Ref# 10349, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

33 Ton AMADA, Pega 345Q (1993), Fanuc O4PC, 58 Sta., 2

A/I, Ref# 10283, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

33 Ton AMADA, Vipros 358 King II, 58 Stn, Fanuc 18P, (Trader


See Page 4

33 Ton STRIPPIT, FC1250-30-1500, Fanuc OP, 2 A/I, (Trader


See Page 4

33 Ton YAWEI-NISSHINMBO, HPQ-3048 (2012), Siemens

Control, Thick style tooling, Ref# 10326, (Jordan Craig


See Page 22

33 Ton AMADA, ApelioIII 357V (2003), Fanuc 16L, 2000 Watt,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

33 Ton AMADA, ApelioIII 357V (1999), Fanuc 16L, 2000 Watt,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

33 Ton AMADA, EMK3610NT AMNC-F (2007), 60"x 100", Ref#


Fax: 845-398-0074) See Page 22

33 Ton AMADA, Vipros 368 King II (1998), Fanuc 18P CNC

control, Ref# 10363, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

33 Ton AMADA, Vipros 357 Queen (1998), Fanuc O4PC &

PHNC, 58 Sta, 2 A/I, Ref# 10179, (Jordan Craig Machinery

Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)

See Page 22

33 Ton AMADA, Vipros 358 KingII (1999), Fanuc 18P, 4A/I,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

33 Ton AMADA, Vipros 3610L (2000), L-Shear, 6 Shelf Loader,

Unload Conveyor, Ref# 10269, (Jordan Craig Machinery Int’l


33 Ton AMADA, EMK 3610NT (2007), (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

P6100 PRESSES, OBI P9275 PUNCHES, TURRET

PAGE 22 CLUE, November, 2015

Z9000 MISCELLANEOUS Z9000 MISCELLANEOUS

PAGE 22 CLUE, April 2012

MACHINERY ADVERTISER

PUBLISHER

David Stapleford

PRINTED BY:

Ricter Web Printing

DELIVERY

Clue is delivered monthly and is sent bythird class mail on or before the businessday following the seventh of each month

DEADLINE

The deadline for advertising is the dayfollowing the last Wednesday of the month

ADDRESS

343 Smith AveBurlington, ON, L7R 2T9

Phone: 905-528-7765Fax: 905-917-0222

www.cluemachines.com

e-mail: [email protected]

MUST SELL

Cincinnati 10ga x 10'

Power Squaring Shear

Bliss #21

Punch Press

Contact: TCL Asset Group Inc.Ph: 416-736-1367 x228

Website: www.managingyourassets.com

Alberta

B F G Machine Tools Inc., Edmonton (Brian) ...................................780-434-7795........780-436-0717 .......15

British Columbia

ECCO Machinery, Surrey (Rick) ......................................................778-298-2023........778-298-2024 .......17

Modern Tool (BC) Ltd, Port Coquitlam (Pam) ..................................604-472-1444........604-472-1455 .......16

Ontario

Brighton Machinery Sales Inc, Ingersoll (Brian) ...............................519-485-7089........519-485-7368 .......15

Cameron Steel, Lindsay (Bob) ........................................................705-878-0544........705-878-0560 .......21

Compumachine Canada, Toronto (Peter).........................................416-291-9499........416-291-4990 .......22

Corporate Assets Inc, Toronto (Daphne) .........................................416-962-9600........416-962-9601 .......27

Dipaolo CNC Retrofit Ltd., Mississauga (Nelson) ............................905-676-9265 ......................................10

Fabtec Machine Tool Solutions Inc, Oakville (Raj)............................905-469-1586........905-469-3054 .......18

Ferric Machinery Inc, Mississauga (Koen) ......................................877-337-7424........905-820-3234 .........3

Haco Canada, Mississauga (Francis)..............................................905-828-1087........905-828-2062 .......26

Havlik Int’l Machinery, Cambridge (John) ........................................519-624-6240........519-624-4119 .......13

Hayden Lee, Markham (Hayden) ....................................................905-201-7841........905-201-7842 .......14

Hove Machine Services, Wasaga Beach (David) .............................705-429-5910........705-429-1557 .......15

Infinity Assets Solutions, Concord (Leslie) ......................................905-669-8893........905-669-7512 .........2

L S Walker Machine Tools Inc, Milton (Chris) ..................................905-876-0890........905-876-1959 .......12

Machine Solutions Inc., Guelph (Andrew) .......................................416-276-0596 ......................................25

Micro Trend Robotics Inc, Pickering (Peter) ....................................905-509-1218........905-509-2687 .......15

Nimesch Machinery, Markham (George) .........................................416-786-7762........905-415-3868 .........1

Nova International, Mississauga (Richard) ......................................905-624-4522........905-624-1917 .......15

Park Thermal International, Georgetown (Sales) ..............................905-877-5254........905-877-6205 .......15

Phase Quest, Mississauga (Harold) ................................................416-578-5399........416-753-7209 .......15

Powermaster Machinery Ltd, Mississauga (Peter)...........................905-624-9327........905-624-8591 .........5

S K Braly Machinery Inc, Mississauga (Steve) ................................905-793-8080........905-793-2190 .......23

Sabito Machinery Inc, Vaughan/Concord (David) ............................905-738-8730........905-738-5148 .........4

Stan Canada Machinery & Equipment Ltd, Brampton ......................416-252-5767........416-252-4770 .......15

TOS Trade Canada Inc., Milton (Marian)..........................................905-878-0888........905-878-9022 .......28

Trader Machinery Inc, Concord (Jonathan) .....................................905-669-7507........905-669-7512 .........6

Quebec

Boulanger Machinerie Inc, St-Ferdinand (Ben).................................418-428-4709........418-428-4710 .......15

Camex Machinery, Montreal (Elias).................................................514-581-5370........888-414-6441 .......17

Machinerie Gilles Lupien, Drummondville (Gilles)............................819-478-5266........819-478-5266 .......23

Machinery S. Tremblay, Drummondville (Sylvain)............................819-477-6677........819-477-6466 .......15

Soudogaz, St-Lambert de Lauzon (Charles)....................................418 889-2002 ........418 889-2012........25

Stock Machine Tools Co, Laval (Andre) ..........................................514-326-7006........514-329-2599 .......15

USA

Jordan Craig Machinery Int’l Inc, New City, NY (Jordan)..................845-398-0073........845-398-0074 .........8

S R I Advertising, Encino, CA (Susan) ............................................818-761-1792........818-793-0351 .......25

Y.Franke & Company, LLC., Hoffman Estates, IL (York)....................847-874-8972........847-596-8006 .........9

COMPANY PHONE FAX PAGE

ADVERTISERS DIRECTORY

CERTIFIED EQUIPMENT APPRAISALS * Toronto, OntarioPhone: (905) 793-8080 Fax: (905) 793-2190 Email: [email protected]

W W W . S K B R A L Y . C O M

CLUE, July 2010 Page 3

AIR COMPRESSORS

GARDNER DENVER, Eberda, 15hp compressor

DRILLS

SAALFELD, BS50 Pillar drill, 2" capacity

KAO MING, KMR-700DS, 28" Radial

FACING & CENTERING

SENECA FALLS, EW-75 CNC w/Milling station

SENECA FALLS, EW-75 CNC

SENECA FALLS, CS-LO, 5"x 42"

GRINDERS, SURFACE, RECIPROC

KENT, KGS-200, 6"x 16" Manual surface grinder

CHEVALIER, FSG-618M, 6"x 18" Manual

NICCO, NFG-515HD, 6"x 20" Form grinder

TOS, BRH20-02, 12"x 24" Hydraulic surface grinder

BROWNE & SHARPE, 12"x 24"

STUDER, S36, 13"x 40" CNC, Cylindrical

GRINDERS

BLANCHARD, 16" Vertical surface grinder

LATHES, CNC

DAEWOO, 10 HC CNC Turning Centre

MAZAK, Super Quadrad 200 4-Axis

NAKAMURA TOME, TMC-15

NAKAMURA TOME, SL-JR

CHEVALIER, FCL-1840, 18"x 40" Flatbed cnc lathe

LATHES, ENGINE

NAMSEON, 17"x 55"

MORI SEIKI, MR-1500, 20"x 60"

CHIEN YEH, 20"x 60"

CHIEN YEH, CY560, 22"x 60"

CHIEN YEH, CY560, 22"x 80"

TOS, SN63/2000, 24"x 80"

MORANDO, 24"x 120"

PBR, TM-300, 24"x 196"

MACHINING CTRS, HORZ

ENSHU, JE30S

OKUMA, MA40-HA, 16"

MACHINING CTRS, VERT

MORI-SEIKI, NV-5000

MILLS, UNIVERSAL

JAFO, FWD 25U, 10"x 50"

MILLS, VERTICAL

FIRST, LC, 9"x 42" 1-1/2

FIRST, LC-185VS, 10"x 50"

FIRST, LC20VH, 10"x 50" Vert/Horiz

SAWS

SOCO, MC350 NFA Automatic cut-off saw, non-ferrous

SHEARS, POWER SQUARING

DIACRO, 24"x 16ga Hand shear with stand

AMADA, M-2560, 1/4"x 8’

TOOLING

WAHLI, MXH 300/200 Tool setter

LYNDEX, E348 Elba tool setter

MISCELLANEOUS

End Finishing Machine, SOCO, EF-PV/52

Parts cleaner, HOTSY, 7630

Parts cleaner, HOTSY, H20-2836

Thread Rolling Machine, SHENG JIAN, Z28-63

Tilting box table, 30"x 24"x 22"

Clue November, 2015

CLUE, May 2010 PAGE 21

P9275 PUNCHES, TURRET Z9000 MISCELLANEOUS

33 Ton AMADA, Pega 345Q (1993), Fanuc 04PC, 58 Sta, 2 A/I,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

50 Ton WIEDEMANN, Vectrum 5000, 72"x 60", 60" Throat, 54

Stn, tooling, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

R4704 ROLLS, ANGLE BENDING

2"x 2"x 3/16" “NEW” (Demo) TAURING, SAF DS 50HV,

Hydraulic, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

2.2"x 2.2"x 1/4" TAURING, SAF DS 60 HV, (Trader Machinery


2-3/8" x 2-3/8" x 1/4" “NEW” FERRIC, APK60, Mod. Rolls,

DRO, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 7

4"x 4"x 3/8" “NEW” FERRIC, APK101, Mod Rolls, DRO, Hyd.

Side guides, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 7

6"x 6"x 1/2" PULLMAX, Z43, Hydraulic, Pendant Control, Digital

Readout, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

R5603 ROLLS, PLATE BENDING

1"x 10’ PULLMAX, PV7H, Hyd., 3-Roll Double Pinch, (Trader


See Page 4

3/16"x 4’ “NEW” FERRIC, , ASM plate roll, DRO, mot. Bending

roll, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 7

3/16"x 5’ “NEW” FERRIC, , ASM plate roll, DRO, mot. Bending

roll, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 7

3/16"x 6.5’ “NEW” FERRIC, , ASM plate roll, DRO, mot.

Bending roll, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 7

5/16"x 8’ “NEW” FERRIC, , AHS plate roll, 4 roll machine, DRO,


Fax: 905-820-3234) See Page 7

NANTONG, WIIJ-10, Max. Cap 3/8" x 6’, New 2012, Never

used, Roll speed 4m/min, (Machinerie Gilles Lupien

Tel: 819-478-5266, Fax: 819-478-5266) See Page 16

S0653 SAWS, BAND, HORIZONTAL

10.2" x 10.2" COSEN, C-260NC (2012), Fully automatic Horz,

PLC Control, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

S0690 SAWS, BAND, VERTICAL

24" STARTRITE, , (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 8

S0805 SAWS, COLD & FRICTION

SOCO, MC350A (2001), (Machine Solutions Inc.

Tel: 416-220-5910 See Page 1

S0948 SAWS, MISCELLANEOUS

4"x 10" ELUMATEC, , Fully Automatic Circular Saw,

(Machinerie Gilles Lupien Tel: 819-478-5266,

Fax: 819-478-5266) See Page 16

S4105 SHEARS, POWER SQUARING

10ga x 4’ ALLSTEEL, , Hyd, FOPBG, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

1/4"x 10’ NIAGARA, IF-10-1/4II, Hydraulic, (Trader Machinery


1/4"x 10’ PEARSON, , Hydraulic, (Machine Solutions Inc.

Tel: 416-220-5910 See Page 1

1/4"x 10’ “NEW” FERRIC, HGD 3100 x 6, Mot. CNC back

gauge, Auto gap, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 7

1/4"x 10’ AMADA, M3060 (1998), Prog. BG, Pneumatic Sheet

Supports, Ref# 10362, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 22

1/4"x 10’ PEARSON, , Hyd., (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

1/4"x 10’ HACO, (2007), CNC with 39" back gauge, $19,500,

(Machine Solutions Inc. Tel: 416-220-5910 See Page 1

1/4"x 12’ WYSONG, , Mechanical, CNC gauging, (Machine


1/2" x 10’ “NEW” FERRIC, HGD 3100 x 13, Mot. CNC back

gauge, Auto gap, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 7

1/2"x 10’ HACO, HSLX 3013, w/ SP8 Control, Mot. CNC back

gauge, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 7

1/2"x 12’ ALLSTEEL, , Motorized BG adjustable rake and gap,

(Machine Solutions Inc. Tel: 416-220-5910 See Page 1

1/4"-1" x 8’-20’ “NEW” TOSKAR, , Hydraulic, (Machine


W3054 WELDERS, SPOT

20 KVA SIP, , (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

Z9000 MISCELLANEOUS

Transformers 5 KVA to 1000 KVA, Large Assortment of used,

(Park Thermal International Tel: 905-877-5254,

Fax: 905-877-6205)

Pallet Trucks, (Park Thermal International Tel: 905-877-5254,

Fax: 905-877-6205)

Assorted Fans, (Park Thermal International Tel: 905-877-5254,

Fax: 905-877-6205)

Barfeeds LNS, Servo S3, (2007 & 2013) w/Remote pendant,


Fax: 905-669-7512) See Page 4

LYNDEY, , Tool Presetter, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 8

WAHLI, , Tool Presetter, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 8

7055 Auburn Rd., Milton, ON L9T 7V9Ph: (905) 876-0890 Fax: (905) 876-1959

Email: [email protected]: www.walkermachinery.com

MAS VR8A98” Radial Drill

BORING MILLS, CNC, HORZ, FLOORUNION BFP 130 CNC, 5.12", (1994) 120"x 275", Heidenhain ctrlBORING MILLS, HORZ, TABLE4” TOS W100A, 44”x63”x63” trvls, 50 tpr, 4-axis DRO, new paint!, 19814” TOS W100A, 44”x63”x63” trvls, 50tpr, 4-axis DRO, new paint!, 19864“ TOS W100A, (2014) Remanufactured, 50 tpr spindle factory rebuilt to new tolerance, 5-axis Heidenhain DRO4” UNION CNC point to point, 44”x40”x63” trvls, TNC 135 Heidenhain control, very nice condition!4“ TOS W100A, 44"x 63"x 63" trvls, 4-axis DRO 49"x 49" rotary table, new 19964.3” TIGERCUT 110 CNC, 63”x 86” travels, Fanuc 31i control new 20124.3” TIGERCUT 110 CNC, 63"x 86" travels, Fagor CNC 1 degree index table, new 2005BORING MILLS, VERT72” G&L, CNC, 12 ATC, live tools, Refurbished 2009 Fanuc 21i ctlDRILLS, RADIALMAS VR 8A x 2500, 3" capGRINDER, SURFACE6”x16” OKAMOTO 618DX2, mag chuck, coolant, excellent condition!LATHES, ENGINETOS SN 400N, 16"x 80", (2003) 2-Axis, DROENTERPRISE, 20"x 120"TACCHI, 50"x 315", (1973) Steadies, follow rest, 4-jaw chuckPOREBA TCG 160, 63"x 393", As New!NILES, 70"x 315", 3-bedway design, pendant control on carriage heavy duty

LATHES, N/C & CNCMORI SEIKI SL-6 CNC, 50hp motor, Fanuc 6T control, 15"chk new 1981MACHINING CTRS, HORZNIIGATA HN 80 FC, 32"x 32" pallets, Fanuc 11m control, 6 pallet pool built in facing head and in/out spindle movement for boring mill applications, 120 ATC, new 1992MILLS, UNIVERSALTOS FGS 63T plus, 25"x 71", (2002) 3-Axis DRO, Variable speeds/feeds pendant ctl, 50 tpr, unv headZAYER 66MB, 28"x 80", 3-Axis DRO, Unv head, pendant ctl variable speeds/feedsMISCELLANEOUS50 plastic automotive skids, 45"x48" pallet - 4 way pick upCast Iron Floor Plates, 157" x 74" x 16" 2 AvailablePortable Drilling Unit, CLIMAX KM 3000Rotary Table, TOS ISO 16, 86"x 86", 60" Travel, 17 Ton, Rotary & Linear DRO

Clue November, 2015

Clue November, 2015

Page 8 / Steel Marketplace / JULY 2007

�

• APPRAISALS • FINANCING • • TRADE-INS • TOOLING •

• SHIPPING • INSTALLATIONS • • TRAINING • SOFTWARE •

VISIT US AT:www.jordancraigmachinery.com

TO VIEW A COMPLETE LIST

Check out our website for Photos, Specifications and a more complete inventory atwww. jordancraigmachinery.com

JORDAN CRAIG MACHINERY INT’L LLC, P.O Box 737, New City, NY 10956Tel: 845-398-0073 [email protected]: 845-398-0074 www.jordancraigmachinery.com

22 TON TRUMPF, TC2020R BOSCH,TURRET PUNCH, 50” X 100”, MFG:2011APPROX. 3100 HOURS, STOCK #10321

93.5 Ton, TRUMPF TRUBEND 5085, PRESS BRAKE, 6 AXIS BACK GAUGE,MFG:2011

STOCK #10322

33 TON, AMADA, EMK3610NT AMNC-F,TURRET PUNCH, 60” X 100”,MFG:2007, STOCK #10361

33 TON, AMADA,VIPROS 368 KING II,TURRET PUNCH, FANUC 18P CNC CONTROL,

MFG:1998, STOCK #10363

33 TON, AMADA, PEGA 345Q, TURRET PUNCH, FANUC 04PC, 58STA., 2 A/I,MFG: 1993, STOCK #10283

1/4” X 10’ AMADA M3060, SHEAR, PROG. BG, PNEUMATIC SHEET SUPPORTS,

MFG:1998 STOCK #10362

AMADA, GEMINI FO-3015NT, LASER,4,000 WATT, 5’X10’, MFG:2004,

APPROX: 46,000 HOURS, STOCK #10346

AMADA, LC1212A3XL, LASER, 2000 WATT,4’ X 8’, 17,000 HOURS, NEW TURBO BLOWER,

MFG:2004, STOCK #10175

TRUMPF TRULASER 4000 WATT, LASER, 5’ X 10’, 22,000 BEAM ON HOURS,

MFG:2006, STOCK #10325

AMADA FO MII RI 3015, 4000 WATT, LASER,5’ X 10’ ROTARY INDEX,

MFG:2012, STOCK #10320

165 Ton, BYSTRONIC XPERT 150 X 3100, PRESS BRAKE, 8-AXIS CNC, INTEGRATED

CROWNING, MFG:2012, STOCK #10353

72 TON, TRUMPF TRUBEND 3066,PRESS BRAKE, 4-AXIS, LOW HOURS,

MFG:2008 STOCK #10286

Clue November, 2015 CLUE MAGAZINE • Full Page • November Issue

REVISED AD

For More Information and Complete Photo Gallery, go to:www.machinerynetworkauctions.com

or call 888-998-4440 • [email protected]

5.13” Doosan DBC-130 CNC Horiz. Boring Mill

ONSITE & ONLINE AUCTION: Thursday, December 3 • LOCATION: 1881 Treble Dr., Humble, TX 77338

UPCOMING PUBLIC AUCTIONS

ONLINE BIDDING AVAILABLE:

PLANT CLOSURE OF

VENTURE PRECISION TECHNOLOGY

Toyoda FA-800 4-Axis CNC HMC Doosan Puma 400LC CNC Turning Center Mori-Seiki SL-603B/2000 CNC Turning Center

FEATURED EQUIPMENT: Haas VF-6TR 5-Axis Trunnion VMC New 2008 • Haas VF-6B/40 4-Axis VMC New 2007 • Haas VF-4 4-Axis New 2007 • (5) Fadal VMC-15's • (2) MoriSeiki NL-1500Y/500 CNC Turning Centers New 2005 • Daewoo Lynx 220C CNC Chucker New 2006 • Daewoo Puma 240B CNC Turning Center New 2005 • EuroTech Force8 CNC Turning Center • (2) Sodick A500W CNC Wire EDM's • Chmer 323 Z Ram Type EDM New 2008 • Chmer 3M-H32Z EDM Drill New 2006 • Sharp 1020Y Ram Type EDM •8" x 20" Okamoto ACC-52DXNC CNC Surface Grinder • 12"x24" Grand Rapids 370 Surface Grinder • 6" x 18" Chevalier FSG-618M Hand Feed Surface Grinder • (4) Heald 273A Universal I.D. Grinders •10" x 20" Landis 1R Universal OD Grinder • 5" x 12" Myford MG-12 Cylindrical Grinder • 24" x 60" Summit 24X60B Engine Lathe • 16" x 40" Summit 16-3X40 Engine Lathe • (2) Emco Maier Emcomat15D Electronic Engine Lathes • (3) 22"x33" Yang CL5685G Gap Bed Engine Lathes • 22"x 33" Yang 850G Gap Bed Engine Lathe • Bridgeport Series I Vertical Mill • Chevalier FM-3VS Vertical Mill •(2) Atrump K3VL Vertical Mills • 16" Starrett HB-400 Comparator • Toolroom Machinery • Misc. Tool Holders and Tooling • Vises • Chucks • Fixtures • Shop • Office Furniture and more.

Haas VF-6TR, 5-Axis Trunnion, w/TR-310 Tbl.

ONSITE & ONLINE AUCTION: Tuesday, December 15 • LOCATION: 8060 S. Kyrene Rd., Tempe, AZ 85284

AUCTIONDATE

11:00 AM PST

DECEMBER

15

PLANT CLOSURE OF

PRECISION AEROSPACE FACILITY

Mori Seiki NL-1500Y/500 CNC Turning Center Sodick A500W CNC Wire EDM Heald 273A Universal I.D. Grinder

FEATURED EQUIPMENT: P&H Bridge Cranes up to 20 Ton • Messer CNC Plasma & Flame Cutting Systems • Modern Tube Cut-Offs • Metlsaw and Oliver ColdSaws • Wysong 1025 Shear • Lifting Equipment and More Sale in Conjunction with: PERFECTION INDUSTRIAL SALES

ONLINE AUCTION #1: Wednesday, December 2 • ASSET LOCATION: 3400 Wolf Rd., Franklin Park, IL 60131

STEEL SERVICE CENTER EXCESS EQUIP.

Sale in Conjunction with: INVESTMENT RECOVERY SERVICES

1 of 260 HP Geared

2013 2011

1 of 3

2012 2012

2008

1 of 2

2005

1 of 2 1 of 4

FEATURED EQUIPMENT: 5.13” Doosan DBC-130 CNC Table-Type Horiz. Boring Mill New 2013 • Toyoda FA-1050S CNC HMC New 2012 • (2) Toyoda FA-800 4-AxisCNC HMC • Mori Seiki SL-603B/2000 CNC Turning Center • (3) Doosan Puma 400LC CNC Turning Center New 2012/2011 • Doosan Puma 700L CNC Turning •(2) Doosan Puma 300LC CNC Turning Center as New as 2010 • Doosan Puma 280L CNC Turning Center New 2008 • Sharp SVG-8540A 4-Axis VMC New 2011 • HAASVF-2 4-Axis VMC Like New 2014 • Doosan DMV-3016 4-Axis VMC • Velox VX-530-DC Automatic Dual Column Horizontal Band Saw • Laxes 320HL Automatic Dual Column Horizontal BandSaw • DCM 4562 Magnetic Particle Inspection System • CT50 & CT40 Tool Holders • (8) Jib Cranes • (3) Nissan Forklifts • Compressors • Tooling and Support • CNC Rotary Tables and more.

AUCTIONDATE

11:00 AM CST

DECEMBER

3

CLOSING:11:00 AM CST

DECEMBER

2

FEATURED EQUIPMENT: (9) DoAll C-4100NC & C-3300NC Horiz. Bandsaws as Late as 2012, Dual Hoist Single Leg Gantry Crane Systems up to 6 ton Cap., Dual Jib CraneRail System, Dalmec Manipulator, Jib Cranes, Sullair 10-30 & LS12 Air Compressors and More Sale in Conjunction with: PERFECTION INDUSTRIAL SALES

ONLINE AUCTION #2: Wednesday, January 13, 2016 • ASSET LOCATION: 3400 Wolf Rd., Franklin Park, IL 60131

STEEL SERVICE CENTER EXCESS EQUIP.CLOSING:1:00 PM CST

JANUARY

13CASTLE METALS – ONGOING LIQUIDATION FEATURING: (18) P&H & Whiting Overhead Cranes up to 30 Ton Cap., Over 5,000 Ft of Heavy Duty Bridge Crane Runway

M A C H I N E R Y

899 Danforth PlaceBurlington, ON L7T 1S1Phone: 905-528-7765

Fax: 905-917-0222

Address: 2783 Portland Dr. Oakville ON L6H 6M6 Tel: 905-829-1579 Email: [email protected] Website: www.smtcl.com www.smtcl.ca

CY-K800B/3000 • Distance Between Centers: 118” • Swing Over Bed: 31.5” • Swing Over Cross Slide: 20.5” • Width of Bed: 23.6” • Spindle Bore: 5” • Spindle Speed: 22-1200rpm • Main Motor: 20HP

CY-K510n/1500, CYK510n/2000 • Distance Between Centers: 59” to 79” • Swing Over Bed: 19.7” • Swing Over Cross Slide: 11.4” • Width of Bed: 15.4” • Spindle Bore: 3.2” • Spindle Speed: 35 – 2500rpm • Main Motor: 10HP

New Arriving Teach-in CNC Lathes With Fagor Control: Fagor 8055i-TC Control, 2-axis drive motor, heat exchanger, full cover door, (10”/16”) 3 jaw chuck, 4-position turret, electric hand wheel, steady rest, follow rest, damping washer, absolute encoder

Special Deal For New Machineries!

New Arriving 3-Axis CNC Turning Center (SCHIESS - German Design): FANUC Oi TD control, α servo spindle motor with manual guide Horizontal 12 position DM servo turret, 1 axial live tool, 1 radial live tool and 10 standard tool holders

VIVA T2Sm/500 • Max Swing Diameter: 22” • Max Cutting Length: 19.3” • Spindle Hole Diameter: 3.5” • Spindle Speed Range: 30-4000 rpm • Main Motor Output Power: 15/18.5 kw

Canada Inc.

VIVA T4Cm/1000 • Max Swing Diameter: 28.3” • Max Cutting Length: 40” • Max Cutting Diameter: 20” • Spindle Speed Range: 30-3000 rpm • Main Motor Output Power: 22/30 kw

Clue November, 2015

november 2015 issue

Documents