NovTech, Inc., 7401 Wiles Road, suite 229, Coral Springs, FL 33067

(888) 701-7466, (954) 471-7281 - www.novtech.com

NOVPEKTMCV

Product Brief

NovTech, Inc., 7401 Wiles Road, suite 229, Coral Springs, FL 33067 [2] (888) 701-7466, (954) 471-7281 - www.novtech.com

NovTech’s Platform Evaluation Kit for the NOVSOM™CV featuring

the Altera® Cyclone® V SoC The NOVPEK™CV Platform Evaluation Kit includes the NOVSOM™CV System-On-Module (SoM),features the Altera® Cyclone® V SoC which combines the Altera® Cyclone® V FPGA with a dual-core ARM® Cortex™-A9 processor. The NOVPEK™CV provides a comprehensive valuation solution for system architects, board designers, BSP developers, application code writers and other members of the engineering team.

The NOVPEK™CV provides engineers with benefits such as: Evaluation of the NOVSOM™CV

Easy access to measure power consumption on each power rail of the FPGA and ability to set the IO voltage for the general use banks

Evaluation/testing and developing with every Altera SoC HPS peripheral

Demonstrating use of the FPGA Local Bus with external peripherals

Demonstrating use of the FPGA high-speed Bus

Full multimedia implementation

Extension of FPGA peripherals via the HSMC and header connectors

Easy access headers allow a Logic Analyzer connection to the FPGA for test and debug (100 plus signals)

Features: Every power rail of the SoC can be isolated and measured

Power module can be customized/scaled for the most demanding applications

Supports HPS boot from: o QSPI o SD CARD o FPGA

Supports FPGA configuration from: o QSPI o HPS o JTAG

Configuration and debug via: o On-Board USB Blaster II o External USB Blaster o System Console o JTAG connector for HPS (ARM) debug o ETM connector (MICTOR) for HPS (ARM) debug

NovTech, Inc., 7401 Wiles Road, suite 229, Coral Springs, FL 33067 [3] (888) 701-7466, (954) 471-7281 - www.novtech.com

Every type of HPS peripheral is accessible o SD o UART (For terminal use) o 1G Ethernet o USBOTG 2.0 o CAN o PUSH-Buttons and LEDs (via GPIO)

o QSPI (on NOVSOM™CV)

FPGA Bank 4 configured as Local Bus supporting external peripherals o 10/100 IEEE1588 L2 SWITCH o USB 2.0 HOST (additional port routed to MiniPCIe connector) o 8Mbyte PSRAM for FRAME BUFFER or general use o USB 3.0 Device (can be configured for HOST mode)

Rich Multimedia support via BANK 3B and BANK 5A o HDMI video out o LVDS video out o RGB TTL video out o HDMI video in o Composite video in o CMOS Camera video in o Audio CODEC

Expansion connectors facilitate adding external peripherals to the board o All BANK 8A (80) signals:

Are routed to 100mil spacing, easy access pin header Are routed to the HSMC connector

o All BANK 3A (32) signals: Are routed to 100mil spacing, easy access pin header

o BANK 3A and 8A IO voltages can be set to any IO standards supported by the FPGA

Supported High Speed FPGA signals: PCIe X4 connector MiniPCIe connector (with USB and SMBUS support) PCIe to USB 3.0 HOST bridge SATA HSMC

o HSMC Types I, II and III supported

NovTech, Inc., 7401 Wiles Road, suite 229, Coral Springs, FL 33067 [4] (888) 701-7466, (954) 471-7281 - www.novtech.com

NOVPEKTMCV Block Diagram

Ordering information: NOVPEKTMCV-6FX28-SL-

31E-PML

The NOVSOM™CV6FX28-SL-31E-C is included

with the NOVPEK™