novus uniflon 51 is a superior performance biaxially ......recovery astm f36 40% min residual...
TRANSCRIPT
Novus Uniflon 51 is a superior performancebiaxially orientated PTFEsheet material with a silica filler.
Physical properties
Thickness 1.5mm
Density 2.2g/cc
Tensile Strength ASTM F152 15MPa
Compression ASTM F36 7%
Recovery ASTM F36 40% min
Residual Stress DIN @ 175oC 32MPa
Creep Relaxation ASTM F38 23%
Gas Permeability DIN 3535 <0.01cc/min
Liquid Leakage ASTM F37 0.21ml/hr
As the company’s products are usedfor a multiplicity of purposes and asthe company has no control overthe method of their applications oruse, the company excludes allconditions or warranties, expressedor implied by statute or otherwise,as to their products and/or theirfitness for any particular purpose.Any technical co-operation betweenthe company and the customer isgiven for customers assistance only,and without liability on the part ofthe company.
Data / Specification Sheet • Novus Uniflon 51
ServiceNovus Uniflon 51 is a general purposegrade for sealing applications across thewhole pH range. It is particularly suitablefor use with strong acids (excepthydrofluoric acid) and alkalis. Otherapplications include solvents, fuels, water,steam, and chlorine. (See the chemicalresistance chart for information).
Approvals / ComplianceConforms with FDA21 CFR 177.1550regulations.
AvailabilityThickness range:0.75mm to 3.0mm
Standard sheet sizes:1.0m x 1.0m1.5m x 1.0m2.0m x 1.0m1.5m x 1.5m2.0m x 1.5m2.0m x 2.0m
Novus Uniflon 51 Pressure/Temperature Limits
120
100
80
60
40
20
0
0 50 100 150 200 250 300 350 400 450
32
1
Suitable subject to chemical compatibility.
Suitable in some cases but check your application requirementswith Flexitallic.
Contact the Technical Team for applications with highertemperatures and pressures. Applicable to 1.5mm and below.
1
2
3
TDS 29. Rev 4
Temperature (oC)
Pres
sure
(Ba
r)
The operating temperature of non-asbestos sheet material isrelated to the thickness of materials selected. Thinner materialsgive better temperature and pressure properties.
Tel. +61 (08) 9455 2155 Fax. +61(08) 9455 2165 www.novussealing.com.au Email: [email protected]