nozzle compensation
TRANSCRIPT
-
7/22/2019 Nozzle Compensation
1/4
NOZZLE COMPENSATION - Regulation 571
Width of any opening exceeds two and a half times the
thickness of the shell plate in inches plus 2.75
w > 2.5(ts) + 2.75 inches
then compensating plate required
Nozzle Mark A2/A3/A5/D
Service BFW INLET/STEAM I/L/
TSP INJECT/DRAIN
Material SA 106 GR B
Size NB 2
Nozzle location on shell/dish SHELL
ts= Actual thickness of shell 0.55
width of opening parallel to longitudinal axis 2
2.5*(ts)+2.75 4.125
Compensating plate required as per eqn. NO
As w < 2.5(ts) + 2.75, compensating plate is not required
for all nozzles except M
-
7/22/2019 Nozzle Compensation
2/4
B4A, BB5/LT2A,LT2B/LT3A, LT2B TW/V/PI, THERMOWELL
BLOWDOWN/ VENT
LEVEL TRANSMIT CONTROL PRESSURE INDICATOR
LEVEL TRANSMIT LSLL
SA 106 GR B SA 106 GR B
2 2
SHELL SHELL
0.55 0.55
2 2
4.125 4.125
NO NO
-
7/22/2019 Nozzle Compensation
3/4
B3 W1/W2
LP STEAM O/L LP STEAM O/L
SA 106 GR B SA 106 GR B
8 6
SHELL SHELL
0.55 0.55
8 6
4.125 4.125
NO NO
-
7/22/2019 Nozzle Compensation
4/4
M
MANHOLE
SA 516 GR B
24 in
SHELL
0.55 in
12 in
4.125 in
YES