ns0-506 network appliance - gratis exam - … · 2016-04-30 · ns0-506 network appliance number...
TRANSCRIPT
http://www.gratisexam.com/
NS0-506 network appliance
Number: NS0-506Passing Score: 800Time Limit: 120 min
http://www.gratisexam.com/
www.examsforall.com
http://www.gratisexam.com/
Exam A
QUESTION 1. On a FAS8040, which port is used for FCoE connections?
A. e0MB. e0PC. 0aD. e0h
Correct Answer: DSection: (none)Explanation
Explanation/Reference:
QUESTION 2. Click the Exhibit button.
Referring to the diagram shown in the exhibit, what will happen if PDU-B fails?
http://www.gratisexam.com/
A. Both Node A and Node B will remain online and all disk shelves will remain online.B. Both Node A and Node B will remain online, but all disk shelves will immediately lose power and become inaccessible.C. Both Node A and Node B willimmediately lose power and become inaccessible.D. Node A will immediately lose power and become inaccessible. Node B will remain online.
Correct Answer: ASection: (none)Explanation
Explanation/Reference:
QUESTION 3. Hosts and switches are connected to a FAS8040. Multiple FC-enabled SVMs have been created, and LUNs have been mapped to multiple hosts. During failovertesting, one of the hosts lost connectivity to its LUNs.
What needs to be examined?
A. FAS8040 ALUA configurationB. host multipath settingsC. xhost iSCSI timeout valuesD. switch NPIV settings
Correct Answer: ASection: (none)Explanation
Explanation/Reference:
QUESTION 4. Which three environmental or physical requirements need to be met when designing a SAN solution? (Choose three.)
A. rack spaceB. coolingC. clustered Data ONTAP versionD. IOPS
http://www.gratisexam.com/
E. power
Correct Answer: ACDSection: (none)Explanation
Explanation/Reference:
QUESTION 5. You have a large, heterogeneous SAN environment. You are asked to gather information for all hosts, HBAs, switches, and storage. You are also told that youmust collect this information over network protocols without agents.
Which two NetApp tools allow you to perform this task? (Choose two.)
http://www.gratisexam.com/
A. OnCommand InsightB. OnCommand ReportC. OnCommand Unified ManagerD. nSANity
Correct Answer: ADSection: (none)Explanation
Explanation/Reference:
QUESTION 6. Which information-gathering command should you use to gather logs for troubleshooting switch information for your Brocade switches?
A. cfgshow
http://www.gratisexam.com/
B. fabricshowC. configshowD. supportsave
Correct Answer: DSection: (none)Explanation
Explanation/Reference:
QUESTION 7. You are asked to migrate a SAN LIF to a node that was recently added to your cluster. The following CLI command was provided to you to complete the migration:
network interface modify -vserver svm1 -lif lif1 -home -node cl01-04 -homeport 6a
Which step is missing?
A. All hosts connecting to the controller throughlif1 must be shut down.B. The LIF must first be added to a portset.C. Your zoning must be updated on the upstream switch.D. The LIF must be put in a status-admin down state.
Correct Answer: DSection: (none)Explanation
Explanation/Reference:
QUESTION 8. You are verifying multipathing from the host to the storage controller.
Which three components should you verify? (Choose three.)
A. Verify that all switch ports connected to the hosts and storage devices are online using the vendor's GUI.B. Verify that both FC HBA ports in the host are online using the HBA vendor's GUI.C. Verify that the FC HBAs WWNN's are in the igroup in the SVM.D. Verify that the SVM's LIFs being used for multipathing are attached to the correct same physical FC port.
http://www.gratisexam.com/
E. Verify that the storage controller FC target ports status are online with the switch port showing the FC switch to which they are connected.
Correct Answer: ADESection: (none)Explanation
Explanation/Reference:
QUESTION 9. Click the Exhibit button.
Referring to the exhibit, which entry is appropriate to add to a zone on the FC switch?
http://www.gratisexam.com/
A. 20:05:00:a0:98:29:18:76B. 20:10:00:a0:98:29:18:76C. 20:14:00:a0:98:29:18:76D. 50:10:00:a0:98:29:18:76
Correct Answer: BSection: (none)Explanation
Explanation/Reference:
QUESTION 10. Click the Exhibit button.cl01::>igroup show -vserver
svm1
VserverIgroup Protocol OS
Type Initiators
--------- ------------- ------
-- --------- -----------------
--------------------
svm1 esx_cluster mixed vmware
20:00:00:25:b5:11:a0:01,
20:00:00:25:b5:11:b0:01,
iqn.1998-01.com.vmware:esx02
cl01::>
A customer is provisioning storage for two ESXi hosts using FCoE with CNA adapters. The customer mapped the LUN to the igroup shown in the exhibit. Afterscanning for new devices, the LUN is only seen by one of the ESXi hosts.
http://www.gratisexam.com/
What caused the problem?
A. One of the hosts is added in the igroip via iSCSI IQN.B. The igroup protocol needs to be configured as FCP.C. The switch zoning configuration does not include the correct initiators.D. The LIFs are not on their home ports.
Correct Answer: ASection: (none)Explanation
Explanation/Reference:
QUESTION 11.An administrator wants to provide isolation among physical devices connected to the same FCP fabric. Which Cisco switch feature accomplishes this task?
A. VSANB. FSIPC. LUN maskingD. logical domains
Correct Answer: ASection: (none)Explanation
Explanation/Reference:VSANs provide the following capabilities:·Isolate devices physically connected to the same fabric. Reference:http://www.cisco.com/en/US/products/ps5989/prod_troubleshooting_guide_chapter09186a008067a306.html
QUESTION 12. You are creating a logical diagram for an FCP SAN solution.
You need to show connectivity between which three sets of components? (Choose three.)
A. management port and ACP cabling
http://www.gratisexam.com/
B. inter-cluster network ports and hostsC. hosts and FCP switchesD. hosts and FCoE switchesE. FCP switches and storage controller
Correct Answer: BCESection: (none)Explanation
Explanation/Reference:
QUESTION 13. When designing a new SAN solution, which three components should be verified with the IMT? (Choose three.)
http://www.gratisexam.com/
A. the connection protocolB. the patch panel make and modelC. host OS type and versionD. the type of Ethernet switchE. the clustered Data ONTAP version
Correct Answer: CDESection: (none)Explanation
Explanation/Reference:
QUESTION 14. Which two port personality combinations are valid for the onboard UTA2 ports on a FAS8040 controller?
http://www.gratisexam.com/
A. e0e/0e - fce0f/0f - fce0g/0g - cnae0h/0h -cna
B. e0e/0e - fce0f/0f - cnae0g/0g - fce0h/0h -cna
C. e0e/0e - fce0f/0f - fce0g/0g - fce0h/0h -cna
D. e0e/0e - cnae0f/0f -cnae0g/0g - fce0h/0h - fc
Correct Answer: ASection: (none)Explanation
Explanation/Reference:
QUESTION 15. Click the Exhibit button.
An administrator is attempting to map an iSCSI LUN to a Windows 2012 host, but the windows host fails to discover the iSCSI targets.
Referring to the exhibit, what is the connectivity problem?
http://www.gratisexam.com/
A. The iSCSI service is running on svm1, but iSCSI is not licensed on the nodes.B. The iSCSI LIFs are not currently on their home port.C. The iSCSI LIFs are currently disabled.D. The LIFs do not have a failover group defined.
Correct Answer: ASection: (none)Explanation
Explanation/Reference:
QUESTION 16. Click the Exhibit button.
cl01::>ucadmin show
Current Current Pending
Pending Admin
Node Adapter Mode Type Mode
------------- ------- -------
--------- -------- --------- -
----------
cl01-01 0c fc target --
online
cl01-01 0d fc target --
online
cl01-01 3a cna target --
online
http://www.gratisexam.com/
cl01-01 3b cna target --
online
cl01-01 4a cna target --
online
cl01-01 4b cna target --
online
cl02-01 0c fc target --
online
cl02-01 0d fc target --
online
cl01-02 3a cna target --
online
cl01-02 3b cna target --
online
cl01-02 4a cna target --
online
cl01-02 4b cna target --
online
12 entries were displayed.
cl01::>
Referring to the exhibit, which cables are valid for connecting port 0d on node cl01-02 when the switch is 10 meters away?
http://www.gratisexam.com/
A. Twinax copper SFP+ active cablesB. Twinax copper SFP+ passive cablesC. LC/LC optical OM3 cablesD. RJ45 Cat6 Ethernet cables
Correct Answer: CSection: (none)Explanation
Explanation/Reference:
QUESTION 17. A company has a 4-node Data ONTAP cluster called cl01. The administrator attempts to create a volume on svm1 and can only select aggregates that are ownedby node cl01-01 or cl01-02.
What is causing the problem?
A. The SVM peering relationshiphas not been configured with the cl01-03 and cl01-04 HA pair.B. The storage virtual machine is not configured to use nodes cl01-03 or cl01-04.C. No LIFs have been created on nodes cl01-03 or cl01-04.D. Volume creation delegation is not configured to allow use of cl01-03 or cl01-04 owned aggregates.
Correct Answer: BSection: (none)Explanation
Explanation/Reference:
QUESTION 18. You created a 5 TB VMware volume "vol_esx_nfs1" in "svm1" for an NFS datastore. The storage efficiency savings of the vmdks are one over 50%, but theapplication team wants to minimize the possibility of an out-of-space condition. You enable autogrow, autoshrink, and snapshot autodelete with the followingcommands:
volume modify -vserver vm1 -volume vol_esx_nfs1 -space-mgt-try-first volume_grow
snapshotautodelete modify -vserver vm1 -volume vol_esx_nfs1 -enabled true -delete-
http://www.gratisexam.com/
orderoldest_first -target-free-space 10% -trigger volume
volautosize -vserver vm1 -volume vol_esx_nfs1 -mode grow_shrink -maximum-size 10 TB -
minimum-size 5 TB -grow-threshold-percent 80 -shrink-threshold-percent 60
What will these commands do?
A. Delete the oldest Snapshot copies before growingthe volume.B. Increase the Snapshot copy reserve before growing the volume.C. Shrink the volume before deleting the Snapshot copies.D. Grow the volume before deleting the Snapshot copies.
Correct Answer: DSection: (none)Explanation
Explanation/Reference:
QUESTION 19. Which resource would you use to search for information about the configurations for NetApp products that work with third-party solutions?
A. Config AdvisorB. Host Utility KitC. Interoperability Matrix ToolD. Clustered Data ONTAP 8.3 SAN Administration Guide
Correct Answer: CSection: (none)Explanation
Explanation/Reference:Reference:http://hwu-stage.netapp.com/Resources/FundedTools.htm
QUESTION 20. What is a NetApp-recommended zoning best practice?
A. Switch portzoning should always be employed.
http://www.gratisexam.com/
B. WWNN zoning is required.C. Single-initiator zoning is recommended.D. Zones can overlap.
Correct Answer: CSection: (none)Explanation
Explanation/Reference:
QUESTION 21. A customer has recently deployed a clustered Data ONTAP 8.3 system and is trying to mount LUNs to a Windows 2012 Server using the iSCSI protocol. Theyhave enabled jumbo frames on their nodes as well as their Windows 2012 Server. Whenever they attempt to scan for a new LUNs, Disk Management times out anddoes not present any new storage.
What is causing the problem?
A. Windows 2012 does not support jumbo frames with the iSCSI protocol.B. Clustered Data ONTAP 8.3 does not support the iSCSI protocol.C. They have jumbo frames enabled on the host and storage, but not the Ethernet switches.D. Clustered Data ONTAP 8.3 does not support jumbo frames with the iSCSI protocol.
Correct Answer: CSection: (none)Explanation
Explanation/Reference:
QUESTION 22. Click the Exhibit button.
cl01-01::>vol show -vserver
svm1 -volume v_iscsi_exch01
Vserver Name: svm1
Volume Name: v_iscsi_exch01
http://www.gratisexam.com/
Aggregate Name: a1_cl01_sas
Volume Size: 5 GB
Volume State: online
Volume Type: RW
Volume Style: flex
Available Size: 4.75GB
Filesystem Size: 5GB
Total User-Visible Size:
4.75 GB
Used Size: 144 KB
Used Percentage: 5%
Volume Nearly Full Treshold
Percent: 95%
Volume Full Treshold
Percent: 98%
Maximum Autosize (for
flexvolvs only): 6GB
(DEPRECATED) -Autosize
Increment (for flexvolvs
only): 256MB
Minimum Autosize: 5GB
http://www.gratisexam.com/
Autosize Grow Threshold
Percentage: 85%
Autosize Shrink Threshold
Percentage: 50%
Autosize Mode: off
Autosize Enabled (for
flexvolvs only): false
Space Guarantee Style: volume
Space Guarantee in Effect:
true
Snapshot Directory Access
Enabled: true
Space Reserved for SnapshotCopies: 5%
Snapshot Reserve Used: 0%
Snapshot Policy: none
Node name: cl01-01
Reserved Space for
Overwrites: 0B
Fractional Reserve: 100%
Primary Space Management
http://www.gratisexam.com/
Strategy: volume_grow
Total Physical Used Size:
144KB
Physical Used Percentage: 0%
A customer has a volume with the configuration shown in the exhibit.
What will happen if the volume vs_iscsi_exch01 reaches 85% used?
A. The volume will delete snapshots until 20% is free in the volume.B. The volume will automatically grow up to 6 GB.C. The volume will no longer be accessible from the host.D. The volume will continue working as expected.
Correct Answer: DSection: (none)Explanation
Explanation/Reference:
QUESTION 23. You have a new FAS8080EX 2-node cluster. The FC switch ports connected to the onboard UTA2 ports will not come online.
Which two node-based issues would case the problem? (Choose two.)
A. The UTA2 ports are set to target.B. The UTA2 ports have 10 GB SFP+ optics installed.C. The UTA2 ports have 16 GB SFP+ optics installed.D. The UTA2 ports are in cna mode.
Correct Answer: BDSection: (none)Explanation
Explanation/Reference:
http://www.gratisexam.com/
QUESTION 24. A company has 50 ESXi hosts connected using FC to a single target port on a NetApp cluster.
Ten hosts are configured with an HBA queue depth on 128. Forty hosts are configured with a HBA queue depth of 32. They are experiencing performance problemswith their FC LUNs.
Which two actions will resolve the problem? (Choose two.)
A. Use VSC to set recommended values for the hosts.B. Reduce the HBA queue depth on the on the applicable HBAs.C. Add additional target ports to allow for greater initiator distribution.D. Increase the total queue depth on the NetApp cluster.
Correct Answer: ACSection: (none)Explanation
Explanation/Reference:
QUESTION 25. You are planning to move to a newer clustered Data ONTAP version.
Which two resources should you review prior to the move? (Choose two.)
A. Software Setup GuideB. IMTC. Upgrade AdvisorD. System Administration Guide for Cluster Administrators
Correct Answer: BCSection: (none)Explanation
Explanation/Reference:Reference:https://library.netapp.com/ecmdocs/ECMP1368868/html/GUID-9194A9CF-F7F8-48B5- 82B0-D494D3D64105.html
QUESTION 26. Which two flags would you use to enable NetApp thin provisioning on a LUN? (Choose two.)
http://www.gratisexam.com/
A. -space-reserve enabled -space-allocation enabledB. -space-reserve enabled -space-allocation enabledC. -space-reserve disabled -space-allocation disabledD. -space-reserve disabled -space-allocation enabled
Correct Answer: CDSection: (none)Explanation
Explanation/Reference:
QUESTION 27. A customer has a host experiencing performance problems with its FC LUNs. The customer has examined the nodes hosting the LUNs, and both the disk andCPU performance are below 50% utilization. The customer examined the switch ports connected to the storage array, and they are also below 50% utilization.
Which three should the customer verify? (Choose three.)
http://www.gratisexam.com/
A. that the HBA queue depth is set properlyB. that the host HBA has the correct port settingsC. that the host Ethernet interfaces are using jumbo framesD. that the host is running SnapDriveE. that the FC switch ports connected to the host have not exceeded the maximum capacity
Correct Answer: ABESection: (none)Explanation
Explanation/Reference:
http://www.gratisexam.com/
QUESTION 28. On a Windows 2012 Server, the FC load balance policy is configured using which two utilities? (Choose two.)
A. NetApp OnCommand System ManagerB. Data ONTAP DSM for Windows MPIOC. Windows MPIOD. Unified Host Utilities
Correct Answer: BDSection: (none)Explanation
Explanation/Reference:Reference:https://library.netapp.com/ecmdocs/ECMP1656700/html/GUID-243B543E-070F-46E9- 9636-6CF8B91EEB82.html
QUESTION 29. You currently have the following configuration on your cluster:
cl01::>igroup show -instance
Vserver Name: svm1
Igroup Name: ig2
Protocol: mixed
OS Type: linux
Portset Binding Igroup: -
Igroup UUID: 3fb136c7-cfd6-11df-a9ab-123478563412
Initiators: -
What must you do to limit the LIFs that are used by an initiator to access a LUN?
A. Create a portset.B. Create an additional igroup.
http://www.gratisexam.com/
C. Change the protocol to iSCSI.D. Change the OS type to windows_gpt.
Correct Answer: ASection: (none)Explanation
Explanation/Reference:Reference:https://library.netapp.com/ecmdocs/ECMP1368525/html/GUID-5CC27202-A43F-429F- AB13-C70E7CD58E09.html
QUESTION 30. A customer has a 4-node cluster and wants to use iSCSI for LUN traffic.
Which license needs to be installed on the nodes?
A. iSCSIB. SnapRestoreC. CIFSD. FC
Correct Answer: ASection: (none)Explanation
Explanation/Reference:
QUESTION 31. A customer has recently deployed a clustered Data ONTAP 8.3 system and is trying to mount LUNs to a Windows 2012 Server using the iSCSI protocol. They areusing Cisco Nexus 5548 network switches and the network administrator has informed the storage administrator that the ports are set to switchport mode trunk.The storage administrator has also been informed that thehost and storage should be using VLAN 400 for iSCSI traffic. When the storage administrator attempts to add the SVM as an iSCSI target, it fails to connect.
What is causing the problem?
A. The storage administrator has not enabled VLAN tagging on the storage ports.B. Clustered Data ONTAP 8.3 does not support the iSCSI protocol on a VLAN tagged interface.C. Windows 2012 Server does not support the iSCSI protocol on a VLAN tagged interface.D. Clustered Data ONTAP 8.3 does not support running iSCSI on a VLAN ID below 1024.
http://www.gratisexam.com/
Correct Answer: ASection: (none)Explanation
Explanation/Reference:
QUESTION 32. Click the Exhibit button.
Referring to the exhibit, how many paths to the LUN are visible from the host?
http://www.gratisexam.com/
Explanation
Explanation/Reference:
QUESTION 33. Which command enables the FC protocol on clustered Data ONTAP?
A. vserverfpolicy enable -vserver<node_name> -policy -name <policy_name> -sequence- number <seq_num>B. vserverfcp create -vserver<vserver_name> -status -adain upC. node run node <node_name>fcadmincongig -eD. vserveriscsi create-vserver<vserver_name> -target -alias <vserver_name>
Correct Answer: BSection: (none)Explanation
Explanation/Reference:Reference:https://library.netapp.com/ecmdocs/ECMP1196817/html/vserver/fcp/create.html
QUESTION 34. A new server has been installed in your environment, but it is unable to see its NetApp boot LUN. You have narrowed the problem down to the zoning on yourCisco switch which has the following configuration:
zone name z_NetAppvsan 400
memberpwwn 20:00:00:25:b5:c0:ff:ee
memberpwwn 50:0a:09:84:8d:7c:51:d5
zoneset name zs_NetAppvsan 400
memberz_NetApp
zoneset activate name zs_NetAppvsan 400
What is the problem with your zoning configuration?
A. The memberdoes not reference the VSAN.B. The zone and zoneset names do not match.
http://www.gratisexam.com/
C. The zoneset was improperly activated.D. The PWWN for your NetApp LIF is incorrect.
Correct Answer: DSection: (none)Explanation
Explanation/Reference:
QUESTION 35. A Windows 2012 Server has a 1 GB thin-provisioned LUN in a 10 GB thin-provisioned volume. After copying a 500 MB file to the LUN, you observe the LUN using 500 MB of space in the volume. After deleting the 500 MB file, you observe the LUN is still using 500 MB of space in the volume.
Which two steps are required to reclaim the space? (Choose two.)
A. Press Optimize in the Windows Defragment and Optimize Drives utility.B. Enablespace-allocationon the LUN.C. Run TRIM on the host.D. Empty the Recycle Bin on the host.
Correct Answer: CDSection: (none)Explanation
Explanation/Reference:
QUESTION 36. Click the Exhibit button.
After mapping the LUN on the cluster, you are not able to see in on the Windows 2012 host.
cl01::>igroup show -instance
Vserver Name: svm1
Igroup Name: ig1-win
Protocol: iscsi
http://www.gratisexam.com/
OS Type: Windows
Portset Binding Igroup: -
Igroup UUID: 358338ba-cfd6-
11df-a9ab-123478563412
Initiators: iqn.1991-
05.com.microsoft: host1 (not
logged in)
Referring to the exhibit, what is the problem?
A. An administrator is not logged into the host.B. The iSCSI target has not been added to the host.C. The OS type should be windows_2008.D. The OS type should be windows_gpt.
Correct Answer: BSection: (none)Explanation
Explanation/Reference:
QUESTION 37. You want to prevent an FCoE frame from being split into two Ethernet frames.
What is the minimum required frame size that will satisfy this requirement?
A. 9216B. 2240C. 1512D. 9000
Correct Answer: B
http://www.gratisexam.com/
Section: (none)Explanation
Explanation/Reference:
QUESTION 38. Click the Exhibit button.
A storage administrator has the configuration shown in the exhibit.
In which scenario would a volume move be successful?
cl01::>vserver show -vserver
svm1
Vserver: svm1
Vserver Type: data
Vserver UUID: 1630b8eb-c2a6-
11e4-a7dd-123478563865
Root Volume: svm1_root
Aggregate: Node1_aggr1,
Node2_aggr1
Name Service Switch: file,
nis
Allowed Protocols: fcp
Disallowed Protocols: nfs,
cifs, iscsi, ndmpIs Vserver with Infinite
http://www.gratisexam.com/
Volume: false
QoS Policy Group: -
cl01::>vserver show -vserver
svm2
Vserver Type: data
Vserver UUID: 1630b8eb-c2a6-
11e4-a7dd-123478563412
Root Volume: svm2_root
Aggregate: Node1_aggr1,
Node2_aggr1, Node1_aggr2
Name Service Switch: file,
nis
Allowed Protocols: fcp
Disallowed Protocols: nfs,
cifs, iscsi, ndmp
Is Vserver with Infinite
Volume: false
QoS Policy Group: -
cl01::>
A. from svm1 aggregate Node1_aggr1 to svm1 aggregate Node2_aggr1B. from svm1 aggregate Node1_aggr1 to svm2 aggregate Node1_aggr2C. from svm2 aggregate Node1_aggr1 to svm2 aggregate Node1_aggr2
http://www.gratisexam.com/
D. from svm1 aggregate Node1_aggr1 to svm1 aggregate Node1_aggr2
Correct Answer: ASection: (none)Explanation
Explanation/Reference:
QUESTION 39. Click the Exhibit button.
cl01::>lun mapping show -
vserver svm1 -
path /vol/svm1_vol1/lun1 -
igroup svm1-ig1
Vserver Name: svm1
LUN path: /vol/svm1_vol1/lun1
Volume Name: svm1_vol1
Qtree Name: ""
LUN Name: lun1
Igroup Name: svm1-ig1
Igroup OS Type: windows
Igroup Protocol Type: iscsi
LUN ID: 3
Portset Binding Igroup: -
ALUA: true
http://www.gratisexam.com/
Initiators: iqn.1991-
05.com.microsoft: host1
LUN Node: cl01-04
Reporting Nodes: cl01-01,
cl01-02, cl01-03, cl01-04
You have a 2-node cluster. You have added an HA pair with all flash drives for a high-performance database that is currently experiencing performance problemson SAS drives. The LUN shown in the exhibit is moved from cl01-01 to cl01-04 to address the problems.
What is the next step in this scenario?
A. Rescan the host to discover the new LUN location.B. Remove the old path entries from the host.C. Remove the previous owner and partner from the reporting nodes list.D. Unmap the LUN, then remap the LUN.
Correct Answer: DSection: (none)Explanation
Explanation/Reference:
QUESTION 40. Click the Exhibit button.
cl01::>iscsi portal show
Logical Status CurrCurr
Vserver Interface TPGT
Admin/Oper IP Address Node
Port Enabled
---------- ---------- ---- --
http://www.gratisexam.com/
-------- ---------------- ----
------- ---- -------
svm1 1-a 1035 up/up
192.168.1.66 cl01-01 e0a true
svm1 1-b 1051 up/up
192.168.1.67 cl01-01 e0b true
svm1 2-a 1046 up/down
192.168.1.68 cl01-02 e0a true
svm1 2-b 1052 up/up
192.168.1.69 cl01-02 e0b true
Referring to the exhibit, which action would you take to troubleshoot the iscsi-2-a interface?
A. Verify that the iSCSI protocol is licensed for svm1.B. Cycle the upstream switch port down and back up again.C. Verify network connectivity between the host and LIF.D. Verify that the iSCSI protocol is started on svm1.
Correct Answer: BSection: (none)Explanation
Explanation/Reference:
QUESTION 41. You want to verify that a host will be able to see the storage. A LUN is mapped to an igroup for the host, and both the host and storage are connected to FCswitches.
Which command will provide the path status information from the switch?
http://www.gratisexam.com/
A. configureB. cfgshowC. fcpingD. zoneshow
Correct Answer: BSection: (none)Explanation
Explanation/Reference:
QUESTION 42. Click the Exhibit button.
cl01::> net int show -vserver
svm1
(network interface show)
Logical Status Network
Current Current Is
Vserver Interface Admin/Oper
Address/Mask Node Port Home
----------- --------- ------
---- ------------------ -----
------- ------ ----
svm1
fc_lif1 up/up
20:0b:00:a0:98:4e:ba:14
http://www.gratisexam.com/
cl01-01 3a true
fc_lif2 up/up
20:0c:00:a0:98:4e:ba:14
cl01-02 3a true
lif1 up/up 172.16.21.31/24
cl01-01 a0a true
lif2 up/up 172.16.21.32/24
cl01-02 a0a true
4 entries were displayed.
cl01::>
Referring to the exhibit, a customer needs to move LIF "fc_lif1" to a new port.
Which three actions must be performed to accomplish this task? (Choose three.)
A. Remove LIF from the existing portset.B. Quiesce all hosts accessing LUNs over the LIF.C. Take the LIF offline.D. Update the switch zone to include the new WWPN.E. Move the LIF to a new home port using thenetwork interface modifycommand.
Correct Answer: CDESection: (none)Explanation
Explanation/Reference:
QUESTION 43. In a 4-node cluster, how many LIFs are required on each node to allow a host to use ALUA and have multiple optimized paths to each LUN?
http://www.gratisexam.com/
A. 1B. 2C. 4D. 6
Correct Answer: BSection: (none)Explanation
Explanation/Reference:
QUESTION 44. Click the Exhibit button.
cl01::>lun resize -vserver
svm1 -volume db1_vol -lun db1
-size 4096g
Error: command failed: New
size exceeds this LUN's
initial geometry
cl01::>
What is the reason for the error shown in the exhibit?
A. The LUN is thin provisioned, but the parent volume is thick provisioned and cannot satisfy the request.B. The aggregate over commitment threshold has been exceeded.C. The parent volume that contains the LUN is out of space.D. The LUN cannot be grown past its maximum resize size.
Correct Answer: DSection: (none)Explanation
http://www.gratisexam.com/
Explanation/Reference:Reference:http://community.netapp.com/t5/VMware-Solutions-Discussions/lun-resize/td-p/8608
QUESTION 45. You are asked to configure the Service Processor on a newly installed node, and must verify the following command:
system-service processor network modify -node local -address-family IPv4 -enable true
-ip-address 192.168.123.98 -netmask 255.255.255.0
Which statement about this command is true?
A. -nodeshould reference the actual node name.B. The gateway IP address is missing.C. The Link Local IP Address is missing.D. IPv6 is required for the SP.
Correct Answer: ASection: (none)Explanation
Explanation/Reference:
QUESTION 46. Inside of an SVM, an iSCSI IP address is defined on which object?
A. qtreeB. LUNC. LIFD. node part
Correct Answer: CSection: (none)Explanation
Explanation/Reference:
QUESTION 47
http://www.gratisexam.com/
.Which protocol allows to access a controller's CLI interface?
A. SSHB. NTPC. TFTPD. IMAP
Correct Answer: ASection: (none)Explanation
Explanation/Reference:Reference:https://library.netapp.com/ecm/ecm_download_file/ECMP1196798(page 11)
QUESTION 48. Microsoft ODX supports which scenario on clustered Data ONTAP 8.3?
A. moving a VHDX with both SMB 3.0 and SAN protocols as either source or destinationB. moving a VHDX from an SMB 3.0 source to an SMB 3.0 destination with no SAN supportC. moving a VHDX from a SAN LUN source to a SAN LUN destination with no SMB supportD. moving a VHDX with both SMB 2.1 and SAN protocols as either source or destination
Correct Answer: ASection: (none)Explanation
Explanation/Reference:
QUESTION 49. You are zoning a fabric for a clustered Data ONTAP storage system. After cabling, you see the following addresses logged into the fabric:
20:04:00:a0:98:16:db:9c
50:0a:09:83:8d:b1:ce:c3
What should be included in the zone configuration?
http://www.gratisexam.com/
A. 50:0a:09:83:8d:b1:ce:c3 and the initiator WWNNB. 50:0a:09:83:8d:b1:ce:c3 and the initiator WWPNC. 20:04:00:a0:98:16:db:9c and the initiator WWPND. 20:04:00:a0:98:16:db:9c and the initiator WWNN
Correct Answer: BSection: (none)Explanation
Explanation/Reference:
QUESTION 50. A customer is experiencing slower than expected performance on a database connected to an iSCSI LUN. They are surprised that performance has decreasedeven though they have upgraded from a 1 GB to a 10 GB switch.
What are three causes for this problem? (Choose three.)
A. Spanning Tree is incorrectly configured on the cluster nodes.B. There is a faulty cable or SFP in the data path.C. There is an MTU mismatch between the hosts, controllers, and switch.D. Flow control is incorrectly set on either the host or controllers.E. Routing is not set up between the iSCSI and cluster networks.
Correct Answer: ABCSection: (none)Explanation
Explanation/Reference:
QUESTION 51. Click the Exhibit button.
http://www.gratisexam.com/
A customer has deployed a new FAS8080EX running clustered Data ONTAP 8.3. Host A is running multipath software that has been properly configured. Also,Host A is currently accessing a LUN using the FC protocol stored on Node A. Switch A, shown in the exhibit, fails.
What will happen next?
A. Node A will panic causing a storage failover to Node B.B. Host A will lose all access to its LUN.C. Host A will continue to access its LUN using Switch B through Node B.