nvg.pdf
TRANSCRIPT
-
Grilles, Louvres, Diffusers & Air Valves
Polyester powder coated white and silver finishes as standard. Extensive range of stock product lines. Quality assured product range. Special BS and RAL colours available to order. Air Valves and Spiral Duct Grilles complete the range.
l indab I the vent i lat ion products specia l ist
-
DescriptionLindab have been supplying air terminal devices to theUK market for over 15 years. Our range of grilles, louvresand diffusers have been designed and are manufacturedto provide high quality products at extremely attractiveprices. By focusing on a selected range of product lineswe are able to deliver these quality products directly fromstock or on very short lead times.
QualityThe quality of our products and service have always beenof great importance to us. Lindab is a quality assuredcompany and is accredited to BSEN ISO 9001: 2000.
ConstructionLindab grilles & diffusers are manufactured from highquality materials throughout with mechanically lockedmitred face corners which provide a well engineered jointcombined with excellent visual appearance.
FinishAll grilles & diffusers are polyester powder coated toprovide a high quality, tough and attractive finish in white(RAL 9010 semi-gloss). Non vision transfer grilles aresupplied in a satin silver finish as standard.
The satin silver finish is also available as a no costoption on all grilles.
Weather louvres and dampers are supplied mill finish.
FixingStandard products are supplied with countersunk fixingholes in the border, complete with colour matched fixingscrews (NOTE: CD diffusers, tile replacement eggcrategrilles & weather louvres do not have face fixing holes).
PackagingAll products are individually shrinkwrapped and fitted withremovable oversized plactic corner pieces to protect thegrill/diffuser face & corners in transit (circular ceilingdiffusers are individually suitably wrapped for transit).
OptionsPaint Finish - In addition to the standard finishesvirtually any RAL or BS colours maybe specified at extracost.Dampers - All products (ex. weather louvres) can besupplied complete with an opposed blade damper.Plenum Boxes - Are available in both high impactpolystyrene & galvanised sheet steel. Being lighter ourplastic boxes are easier to install, are generally availablefrom stock and offer significant cost benefits.
Ordering ProcedureWhen ordering please give the nominal duct aperture intowhich the product is to be offered (for ceiling diffusersgive the neck size). These are the dimensions used asstandard. Give the width dimension first, followed by theheight.
A manufacturing size reduction tolerance is providedto ensure a good fit. If the overall size is critical pleaseorder by these dimensions clearly stating overall size.
Blades on grilles always run width dimension.
Technical DataProduct selection data available on request.
NOMINAL SIZE + 44mm
NOM
INAL
SIZ
E + 44
mm
30mm FACEBORDER
NOM
INAL
SIZ
E - 6m
m
67mm
22mm
OP T.OBD
Single Deflection Grille with Damper
Single deflection grilles have a single row of individuallyadjustable horizontal blades. They are suitable forsidewall supply & extract in a wide range of applications.A centre supporting mullion is fitted to all grilles over400mm to ensure rigidity.
Free Area: Approx 75%.
Single Deflection Grilles - Type SD
-
NOMINAL SIZE + 44mm
NOM
INAL
+ 44
mm
30mm FACEBORDER
90mm
46mm
OPTIONALOPPOSED
BLADE DAMPER
NOM
INAL
SIZ
E - 6m
m
Double Deflection Grille with Damper
NOMINAL + 44mm
NOM
INAL
+ 4
4mm
OPTIONALOPPOSED
BLADEDAM
PER
23mm
68mm
Nominal Size D
Nominal Size (D) - 5m
m
30mm Face
Eggcrate Grille with Damper
Double deflection grilles have a front row of individuallyadjustable horizontal blades and behind them asecondary row of vertical adjustable blades. Suitable forsupply applications in both sidewalls and ceilings.A centre supporting mullion is fitted to all grilles over400mm to ensure rigidity.
Eggcrate grilles have a 13mm x 13mm square core andwith their high free area are ideal for return airapplications. Supplied as standard with countersunkholes for fixing (except 595 x 595 overall tilereplacement sizes). Eggcrate grilles with removable orhinged cores and disposable filter panel are available tospecial order.
Product selection data available on request.
Free Area: Approx 90%.Free Area: Approx 75%.
Double Deflection Grilles - Type DD
Eggcrate Grilles - Type EC
-
67mm
22mm
OP T.OBD
30mm FACE BOARDER STANDARD
NOM
INAL
SIZ
E +
44m
m
NOMINAL SIZE + 44mm
NOM
INAL
SIZ
E -6
mm
Curved Blade Grille with Damper Non Vision Grille with matching Flange
Curved blade grilles are available in 1, 2, 3 or 4 way airdiffusion patterns. They have one set of individuallyadjustable blades. One & two way blow have bladesrunning parallel to the width dimension. A centresupporting mullion is fitted to all grilles over 600mm.
Non vision grilles are manufactured with a fixed inverted Vprofile to provide a vision proof air transfer grille.
Non vision grilles are available as a single unit or withmatching flange as shown below (suitable for door/wallthicknesses of 36-60mm).
Polyester powder coated silver finish as standard.
Curved Blade Grilles - Type CB
Non Vision Grilles - Type NV
Free Area: Approx 38%.Free Area: Variable.
Product selection data available on request.
-
Linear Bar Grille Polymer Plenum Box
Linear bar grilles have a single row of horizontal blades.They are suitable for cill, ceiling or sidewall installationfor supply or extract applications. Models are availablewith straight or angled blades.
Optional blade pitches and styles together withalternative frames are available on request - speak toyour local branch for details.
Our range of polymer plenum boxes offer a highly costeffective and lightweight method of ductwork connectionto our grille range.
The black finish improves installation aesthetics and thenon-corrosive easy clean polymer construction helpsreduce duct-borne bacteria.N.B. Galvanised steel plenum boxes are also available.
Linear Bar Grilles - Type LG
Plenium Boxes - Type PB
Free Area: Approx 75%.
Product selection data available on request.
Available to suit grille neck sizes from 150mm2 to 475mm2 and
duct connection sizes 100-400 mm diameter.
-
Lindab square and rectangular multicone diffusers havebeen designed to meet a wide range of modernapplications and include sizes for ceiling tilereplacement. They are supplied as standard with aspring loaded removable centre core for ease ofcleaning and adjustment. All diffusers are supplied witha safety cord between the diffuser core and frame.
Size RangeFrom 150 x 150mm to 600 x 600mm nominal neck size.For 600 x 600 T bar ceilings please specify 450mmsquare neck with 595 x 595 dimensions across face ofdiffuser.
FixingScrew or rivet fixing through the diffuser neck into theduct or plenum box/pan adaptor.
PackagingEach diffuser is supplied wrapped in polythene withoversized plastic corner pieces to protect diffuser facesand corners. Each unit is marked with the productreference and size for ease of identification.
ConstructionLindab diffusers are manufactured from high qualitymaterials with a cleated and welded constructionproviding excellent mechanical strength and high qualitymitred joints.
Lindab diffusers are supplied as standard with apolyester powder coated white finish RAL9010.
OptionsPaint Finish: Polyester powder coat to BS or RALcolours.
Special Sizes: Available to order.
Dampers: All Diffusers can be supplied complete withan opposed blade damper.
Plenum Boxes: Available in plastic & steel.
Ordering ProcedurePlease always order by neck size NOT by opening sizein ceiling.Eg: 450 x 450 4 way blow diffuser with damper: ModelCD4/D 450 x 450.N.B. For a diffuser to fit into a standard 600 x 600 T barceiling system specify an overall size of 595 x 595across face (450 x 450 neck). Other ceiling style fixings available to order.
DIMENSION CDIMENSION B
DIMENSION A
OPTIONALOPPOSED BLADEDAMPER
REMOVABLE CORE SPRING
108m
m
64m
m
38mm
6mm
Ceiling Diffusers - Type CD
Ceiling Diffusers - Type CD
Dimensions for standard sizes
Nominal Unit Actual Neck Minimum Opening OverallFlangesSize Dimension A Dimension B Dimension C
150 x 150 146 x 146 228 x 288 290 x 290
225 x 225 223 x 223 305 x 305 367 x 367
300 x 300 299 x 299 381 x 381 443 x 443
375 x 375 375 x 375 457 x 457 519 x 519
450 x 450* 451 x 451 533 x 533 595 x 595
* 595sq o/all tile replacement diffuser.Dimensions are in mm.Other sizes available to order.
Product selection data available on request.
-
Architectural Ceiling DiffuserTwisted Swirl Diffuser
Our attractive Twister Swirl Diffuser is a highperformance ceiling diffuser which is ideal for VAVapplications. The radial vane design produces anunmatched high induction swirl pattern designed tooptimize occupant comfort by minimising stratification.
Our Architectural Ceiling Diffuser has been designed toprovide an unobtrusive appearance and a 360 degreediffusion pattern at minimum NC levels. The stampedone piece outer core eliminates mitred corners and dieformed curves provide consistent quality performance.
Twisted Swirl Diffusers - Type TCD
Architectural Diffuser - Type ACD
Product selection data available on request.
Available 594 x 594mm to suit 600mm sq ceiling grid with neck sizes
available to suit 100, 150, 250, 300 and 350mm diameter duct.
DUCT SIZE
CM D A C152, 203
600 x 600 254, 305 59 10356, 381
500 x 500 152, 203, 57 11254
300 x 300 127, 152 25 16178, 203
-
Circular Ceiling Diffuser
30mm FACE BORDER STANDARD
OPTIONALOPPOSED
BLADEDAMPER
67mm
22mm
NOM
INAL
SIZ
E -
6mm
NOMINAL SIZE +44mm
NOM
INAL
SIZ
E +
44m
m
Perforated Face Grille
Lindab Circular Ceiling Diffusers are specificallydesigned to ensure even distribution of air and quitnessin operation. The inner core fixes easily and quickly tothe outer support cone and all edges are beaded to givegreater rigidity and neater appearance. Adjustment ofthe diffuser is achieved via the central threaded cone.
Lindab perforated grilles are medium capacity return orexhaust outlets. The perforated core has 5mm diastaggered holes on 6mm centres and provides 50% freearea. Their design is clean and unobtrusive providing anuncluttered appearance favoured by many architects.
Circular Ceiling Diffuser- Type CCD
Perforated Face Grilles - Type PFD
Size A B C D E F G6 152 305 340 51 5 110 3208 203 407 457 64 6 127 430
10 254 508 569 86 5 146 53012 308 610 680 95 6 155 64015 381 762 851 121 6 172 80018 457 914 1041 146 - 248 95021 634 1080 1148 178 - 280 1100
Free Area: Approx 50%.
Product selection data available on request.
-
30mm
40mm
38mm
38mm Pitch Weather Louvre
50mm
80mm
50mm
50mm Pitch Weather Louvre
Our external weather louvre is supplied complete withbird mesh screen as standard. The 38mm pitch blade isideal for most applications and provides a balancedappearance whilst offering excellent resistance to thepenetration of rain. Louvres are supplied in mill finish asstandard with special paint finishes available to order.
Available up to 1200mm x 1200mm.
Our 50mm pitch weather louvre is available in sizes upto 2000 x 2000 in single sections and like the 38mmpitch louvre, comes complete with bird mesh screen andis mill finish as standard with special paint finishesavailable to order.
Sizes over 2000mm sq are available as multipleassemblies.
38mm Pitch Weather Louvre - Type WG38
50mm Pitch Weather louvre - Type WG50
STANDARD FLANGED FRAME STANDARD FLANGED FRAME
Free Area: Approx 50%.
Free Area: Approx 50%.
Product selection data available on request.Note: 75 and 100mm pitch louvres also available.
-
D
d
KSU Air Exhaust Valve
d
D
KU Air Exhaust Valve
Keeping noise and cost levels down to a minimum areprobably the two biggest problems an engineerdesigning a ventilation system has to face today. Thepatented Model KSU Exhaust Valve has been developedwith these criteria in mind and has a very low noise leveleven when the pressure drop across it is large. Thischaracteristic allows relatively high air velocities to beused, permitting the selection of the most economicalsize of ductwork and exhaust valves.
Adjustment of the airflow is simple, the inner conebeing rotated to the required setting and locked inposition with a single nut. Each air valve is suppliedcomplete with a mounting ring from which it can besimply removed for cleaning without affecting the settingof the valve.
ConstructionThe outer body and inner cone are constructed fromsheet steel, stove enamelled white. The outer body isfitted with a gasket to form an airtight seal with themounting ring.
SizesThe Model KSU is manufactured in five sizes, 100, 125,150, 160, 200mm (external diameter of mounting ring).
The Model KU Exhaust Valve is suitable for use with alltypes of ventilating systems and offers an alternative lowcost valve where noise level, although important, is notcritical. Complete with mounting ring.
Adjustment of the airflow is simple, the inner conebeing rotated to the required setting and locked inposition with a single nut. Each air valve is suppliedcomplete with a mounting ring from which it can besimply removed for cleaning without affecting the settingof the valve.
ConstructionThe outer body and inner core are constructed fromsheet steel, stove enamelled white. The outer body isfitted with a gasket to form an airtight seal with themounting ring.
SizesThe Model KU is manufactured in six sizes, 80, 100,125, 150, 160, 200mm (external diameter of mountingring).
Air Exhaust ValveType KSU
Air Exhaust ValveType KU
Plastic supply and extract valves are also available.
D (mm) d (mm) Weight (g)
KSU 100 130 300
KSU 125 160 390
KSU 150 188 520
KSU 160 190 520
KSU 200 235 780
D (mm) d (mm) Weight (g)
KU 80 110 130KU 100 130 190KU 125 160 270KU 150 188 360KU 160 190 380KU 200 245 580
-
D
d
KI Air Supply Valve
D
d
KSUB Air Exhaust Fire Damper Valve
The Model KI Air Supply Valve is designed to supply airat relatively high velocities whilst maintaining low noisecharacteristics.
Adjustment of the airflow is simple, the inner conebeing rotated to the required setting and locked inposition with a single nut. Each air valve is suppliedcomplete with a mounting ring from which it can besimply removed for cleaning without affecting the settingof the valve.
ConstructionThe outer body and inner cone are constructed fromsheet steel, stove enamelled white. The outer body isfitted with a gasket to form an airtight seal with themounting ring
Model KSUB is acombination fire damperand air valve for exhaustair ventilation systems.
The damper blade willclose when thetemperature in the vicinityof the valve reaches thefusible link rating -standard temperature70C. (Alternative releasetemperatures of 50C and100C available to special order).
Adjustment of the airflow is simple, the inner conebeing rotated to the required setting and locked inposition with a single nut. Each air valve is suppliedcomplete with a mounting ring from which it can besimply removed for cleaning without affecting the settingof the valve.
SizesThe Model KSUB is manufactured in five sizes, 100,125, 150, 160, and 200mm (external diameter ofmounting ring).
Air Supply ValveType KI
Air Exhaust Fire Damper ValveType KSUB
Plastic supply and extract valves are also available.
D (mm) d (mm) Weight (g)
KSUB 100 130 320
KSUB 125 160 420
KSUB 150 188 560
KSUB 160 190 560
KSUB 200 235 810
D (mm) d (mm) Weight (g)
KI 80 111 140KI 100 130 210KI 125 160 300KI 150 190 390KI 160 190 410KI 200 245 650
-
Every effort is made to ensure that the information contained in Lindab literature, drawings and correspondence is accurate, but nowarranty is given in this respect and the Company shall not be liable as a result of any inaccuracy. The Company reserve the right toalter at anytime, without prior notice, the design, specification, packaging or price of any article and without incurring any obligation.
Ref: 181-2/0312
North London 020 8805 3656South London 020 8603 0850Basildon 01268 532016Belfast 02890 781607Birmingham 0121 552 6100Bristol 0117 977 1345
Cardiff 02920 794503Exeter 01626 835032Gateshead 0191 482 5995Glasgow 0141 419 3800High Wycombe 01494 463490Kent 01474 579800
Leeds 0113 297 1111Leicester 0116 255 6044Lincoln 01522 567087Manchester 0161 876 0688Norwich 01603 747532Nottingham 0115 985 1923
Sheffield 0114 244 5444Southampton 023 8026 2111Stoke-on-Trent 01782 383460
LINDAB LtdE-mail: [email protected] Internet: www.lindab.co.uk
www.lindab.co.uk
DescriptionThe Lindab range of spiral duct grilles have beendesigned for fitting directly to circular ducts without theneed for a special take-off.
For supply grilles the angled hit and miss slidingdamper acts as an air turn as well as a damper.
ConstructionRGS grilles are manufactured from hot galvanized steelplate and are assempbled without welding. This meansthat the grille can be used without further surfacetreatment and the exterior of the grille matches thesurface of the siral duct onto which it is mounted.
Model ReferencesRGS-1 Double deflection grille without damperRGS-7 Double deflection grille with angled hit and
miss damper
FixingBy self tapping screws (provided) through pre-drilledholes in grille frame.
Ordering ProcedureA grille designed for supply air applications must havean angled hit and miss damper (code RGS-7). Pleasegive required length first followed by height and ensurethat an appropriate height has been selected for theduct diameter (see table)
Spiral Duct GrillesType RGS
Minimum Free are DimensionA x B Duct (M3) C
Diameter (RGS-7)325 x 75 160 0.017 106
325 x 150 315 0.034 106325 x 225 500 0.056 106525 x 75 160 0.028 126
525 x 150 315 0.056 126525 x 225 500 0.093 126825 x 75 160 0.045 151
825 x 150 315 0.093 151825 x 225 500 0.18 1511025 x 75 160 0.056 186
1025 x 150 315 0.112 1861025 x 225 500 0.224 186
A + 70
A x B
A x B = Cutting Dimension
RGS-1, With directional bars.
RGS-7, With directional bars and slanting sliding damper.
C
47
47
A x
B
B +
30