3461A 121919

701 Millennium Blvd. | Greenville, SC 29607 | (864) 678-1000 | (866) 898-0131 - fax www.hubbellcontrolsolutions.comCopyright © 2019 Hubbell Control Solutions, a division of Hubbell Lighting, Inc. All rights reserved. All product and company names, logos and product identifiers are trademarks ™ or registered trademarks ® of Hubbell Lighting, Inc. or their respective owners. Use of them does not necessarily imply any

affiliation with or endorsement by such respective owners. Page 1

Project Name

Catalog No. Date

NXDCIO SERIESDry Contact Interface Module

• Programmable from the NX Area Controller

• Six dry contact inputs with pilots

• Accommodates 2 and 3 wire inputs (momentary or maintained)

• Six Form-C dry contact outputs

• Removable terminal blocks for easy connections

• DIN rail mounting in the NX Accessory Enclosure

• Requires the NX Device Network Interface Module for connection to the HubbNET network

• Five-year limited warranty

• Low voltage device: 24 VDC

The NX Dry Contact Interface Module provides a simple way to incorporate standard dry contact inputs and outputs into the NX control system.

The NXDCIO accommodates dry contact input closures from building automation, fire, security, and many other types of systems. Both momentary and maintained contacts are supported. The NXDCIO also provides Form-C dry contact outputs that can be used to control many third party devices and systems.

Each of the six inputs can be individually programmed via the NX Area Controller to control a single relay, dimmer, group, or preset anywhere on the NX system. Each of the six Form-C dry contact outputs can be programmed to respond to schedules, switches, or sensors from devices anywhere on the HubbNET™ network.

Dimensional Data

Product Features

TITLE

24 COMPLIANCE

NETWORK

Compliance and Certification

Ordering Information

MODELNXDCIO NX Dry Contact Interface ModuleNXDCIO-KIT-01 Unassembled Kit of NXDCIO with required accessories

NXDCIO

NXENC-D Shown with components mounted

NXHDI

3.64”

1.56”2.21”

6.27”

Required Accessories (Ordered separately if kit not ordered)

MODELNXENC-D Accessory enclosure with DIN rail mounting

NXPWRSPLY Power supplyNXHDI HubbNET device interface

3461A 121919

701 Millennium Blvd. | Greenville, SC 29607 | (864) 678-1000 | (866) 898-0131 - fax www.hubbellcontrolsolutions.comCopyright © 2019 Hubbell Control Solutions, a division of Hubbell Lighting, Inc. All rights reserved. All product and company names, logos and product identifiers are trademarks ™ or registered trademarks ® of Hubbell Lighting, Inc. or their respective owners. Use of them does not necessarily imply any

affiliation with or endorsement by such respective owners. Page 2Page 2Page 2

NXDCIO SERIES Dry Contact Interface Module

Wiring Information

General Specifications

Network Interface Requires the NXHDI Device Network Interface Module for network connection

Inputs Six individually programmable dry contact inputs, 2 or 3 wire, momentary or maintained contact, with or without pilots

Outputs Six individually programmable dry contact outputs with Form-C contacts

Contact Rating 30v volts max, AC or DC, 0.5 Amps maximum current

Programming Programmed from the Area Controller via web browser user interface

Dimensions 6.25”L x 3.65”W x 2.1”H

Weight 6 oz.

Mounting 35mm DIN rail

Warranty Five year limited warranty

NXPWRSPLY

NX FT