o-ring material offering guide

O-Ring MaterialOffering Guide

ORD 5712Effective September 2004

www.parkerorings.com

Failure, improper selection or improper use of the products and/or systems described herein or related items

can cause death, personal injury or property damage.

This document and other information from Parker Hannifin Corporation, itssubsidiaries and authorized distributors provides product and/or system optionsfor further investigation by users having technical expertise. It is important thatyou analyze all aspects of your application and review the informationconcerning the product or system in the current product catalog. Due to thevariety of operating conditions and applications for these products or systems,the user, through his or her own analysis and testing, is solely responsible formaking the final selection of the products and systems and assuring that allperformance, safety and warning requirements of the application are met.

The products described herein, including without limitation, product features,specifications, designs, availability and pricing, are subject to change by ParkerHannifin Corporation and its subsidiaries at any time without notice.

OFFER OF SALEThe items described in this document are hereby offered for sale by ParkerHannifin Corporation, its subsidiaries and its authorized distributors. This offerand its acceptance are governed by the provisions stated on the separatepage of this document entitled “Offer of Sale.”

Copyright © 2004, Parker Hannifin Corporation, Cleveland, OH. All rights reserved.

WARNING

O-Ring MaterialOffering Guide

For the latest information on Parker O-Ring Division products,visit www.parkerorings.com or contact 1-800-C-PARKER.

1

ORD 5712O-Ring Material Offering Guide

Table of Contents

Introduction 2

Material Offering 7

Engineering Tools 29

Gland Designs 37

Sizing Charts 47

O-RingMaterialOfferingGuide

Parker Hannifin Corporation • O-Ring Division2360 Palumbo Drive, PO Box 11751, Lexington, KY 40512-1751

Phone: (859) 269-2351 • Fax: (859) 335-5128www.parkerorings.com

2


Engineers in every industry -from automotive to fluid powerto semiconductor processing -choose o-rings made by ParkerHannifin to keep theirequipment running safely andreliably. That’s becauseParker’s O-Ring Division, adeveloper, manufacturer and

supplier of precision-engineered o-rings for over 50 years, offers aunique combination of experience, innovation and support.

Quality AssuranceIn the O-Ring Division’s world-class facilities, skilled Parkertechnicians manufacture o-rings to exacting standards, closelymonitoring each step of the process through a Controlled BatchIdentification (CBI) program. From in-house mixing and toolingoperations to the final non-contact inspection process, state-of-the arttechnology is employed to provide unparalleled material consistencyand dimensional control. Quality registrations (AS 9000, ISO 9001,QS 9000 and VDA 6.1) are maintained to ensure superior productperformance and process repeatability.

Research and DevelopmentIn its on-site research labs, Parker develops new o-ring material formulationsand compounds to meetcustomers’ needs.These materials aresubjected to a broadrange ofmechanical, physicaland environmentalconditions, and theirperformance is evaluatedthrough a comprehensive testing process.



INTRODUCTIO

N

3


Finite Element AnalysisThrough the use of powerful computersand Finite Element Analysis (FEA) softwarespecifically designed for elastomericevaluation, Parker engineers can predict aseal’s performance in a variety of media,temperatures and pressures before a singlepart is made. This eliminates the need for costly tooling, speeds theproduction process and ensures the selection of the right materialand geometry for a customer’s application. As an added benefit, FEAcan also be used to predict service life.

LiteratureSince their initial release decades ago, theParker O-Ring Handbook (ORD 5700) andthe Precision O-Ring Handbook (5705E)(published in Europe in variouslanguages) have become fixtures onthe reference shelves of engineersand seal specifiers worldwide.

These books contain extensiveinformation about the properties ofbasic sealing elastomers, as well asexamples of typical o-ringapplications, fundamentals of staticand dynamic seal design and o-ringfailure modes.

They also provide an overview of international sizes and standards,and contain compatibility data for fluids, gases and solids. Abridgedversions of these books, available as ORD 5712 (US) and 5705(Europe), provide engineers with fast access to information onstandard sizes and materials.



4


Desktop SealDesignParker’s TotalinPHormTM softwarebrings seal design andmaterial specificationright to the engineer’sdesktop. The software, which consists ofmodules for o-ring, hydraulic and pneumatic,static face and standard composite seal products (aswell as EMI shielding and thermal management), uses a simpleinterface to guide users through the design of application-specificglands and seals. It automatically cross-references thousands of partnumbers, and recommends materials based on the requirements ofSAE, MIL and other standards. Total inPHorm also contains acomplete array of online reference material, including test reports,technical bulletins and seal maintenance instructions. It is availableon CD-ROM in English, German and French versions.

Online ToolsThe Parker O-Ring Division'swebsite at www.parkerorings.comoffers many time-saving tools,including temperature anddimension converters, gland designrecommendation charts, atroubleshooting utility and a pressurecalculator. The site also features aninteractive compatibility guide thatrecommends elastomericcompounds for use in hundreds of fluids - from Abietic Acid toZirconium Nitrate.



5


O-Rings• Manufactured to US and international standards: AS 568B, ISO 3601, DIN

3771, JIS and metric. Custom sizes of almost any dimension.

• Miniature o-rings, large special o-rings, continuously molded and splicedcord.

• Perfluorinated (FFKM) o-rings, custom molded products and die-cuts.Broadest chemical resistance, highest purity and temperature resistance ofany elastomeric family - up to 320°C/608°F.

O-rings made with Parker’s ParofluorULTRA™ Series of advancedperfluorinated elastomers solve applicationproblems within the critical environments ofmany industries.

Product Lines



INTRODUCTIO

N

6


Parbak® Back-up RingsPrevent extrusion in high-pressure applications and help retain lubricant,extending o-ring life.

O-Ring KitsWith conveniently arranged o-rings for repair, assembly and workshop.

AccessoriesProducts to assist o-ring users include assembly greases and lubricants, sizingcones and extraction tools.



MATERIAL O

FFERING

7


Material Offering

CompoundsO-rings can be molded in a wide range of compounds in hardnesses from 40 to 95 Shore A. These materials include:

• Acrylonitrile-Butadiene (NBR) • Butyl (IIR)• Chloroprene (CR) • Ethylene Acrylic (AEM)• Ethylene Propylene (EPDM) • Fluorocarbon (FKM)• Fluorosilicone (FVMQ) • Hydrogenated Nitrile (HNBR)• Perfluoroelastomer (FFKM) • Polyacrylate (ACM)• Silicone (VMQ)

Parker O-ring compounds are formulated to meet the most stringent industrystandards, including NSF, Underwriters Laboratories (UL), Military (MIL-SPEC),Aerospace (AMS), NASA, FDA, USDA, USP, and many customer-specificrequirements.

Wynn's Numbering SystemParker Hannifin acquired Wynn's International, parent company of Wynn'sPrecision and Goshen Rubber, in July 2000. As a result, some Wynn'sproducts and materials were folded into the Parker O-Ring Division's offering.

The Wynn's compound numbering system is in the process of being phasedout; the old number has been noted in parentheses (XXXXX) whereverapplicable.



8


TYPE I

N 0674 -70Polymer Code Sequence Number Durometer Indicator(Single Letter) (four digits) (two digits)

Polymer CodeA PolyacrylateB ButylC Neoprene (Chloroprene)E Ethylene PropyleneF Parofluor ULTRA™ H Hifluor™ K HNBR

L FluorosiliconeN Nitrile (Buna N) and HNBRP PolyurethaneS SiliconeV Fluorocarbon, Aflas®, Hifluor™,

Parofluor™ Z Exotic Polymers

Special Property DescriptionA General PurposeB Low Compression SetE Ethylene AcrylateF Fuel Resistant or Fully

FluorinatedG Higher Fluorine ContentJ NSF / FDA / WRAS ApprovalsL Internally LubedM Mil/ AMS SpecificationsP Low Temperature Flexible

or (AFLAS®)W Non-Black CompoundX Carboxylated

TYPE II

A A 150 -70Polymer Code Special Property Sequence Number Durometer Indicator(Single Letter) Description (three digits) (two digits)

(Single Letter)

Parker O-Ring Compound Numbering Systems

Note: There are two types of nomenclature used to reference Parker O-Ringproducts. See tables below for description of these types.

Durometer Indicator (Hardness)-40 40 ±5 Shore A Durometer-45 45 ±5 Shore A Durometer -50 50 ±5 Shore A Durometer -55 55 ±5 Shore A Durometer -60 60 ±5 Shore A Durometer -65 65 ±5 Shore A Durometer -70 70 ±5 Shore A Durometer -75 75 ±5 Shore A Durometer -80 80 ±5 Shore A Durometer -85 85 ±5 Shore A Durometer -90 90 ±5 Shore A Durometer -95 95 ±5 Shore A Durometer



POLYACRYLATE (ACM)ACM (acrylic rubber) has good resistance to mineral oil, oxygen and ozone. The watercompatibility and cold flexibility of ACM are considerably worse than with NBR.

A1111-70 Good Low Temp -40 to 325 BLACK

AA150-70 (12307) Engines & Transmissions -5 to 350 BLACK

AA154-75 (12358) Engines & Transmissions -5 to 350 BLACK

ETHYLENE ACRYLATE (AEM)Ethylene acrylate is a mixed polymer of ethylene, methyl acrylate and a small amount ofcarboxylated cure-site monomer. Developed as a lower-temperature version ofPolyacrylate, but swells slightly more. Polymer is sold under the tradename VAMAC®.

AE152-70 (12897) Transmissions -40 to 325 BLACK

AE153-75 (12917) Transmissions, -40 to 325 BLACKInternally Lubed

BUTYL RUBBER (IIR)Butyl rubber (isobutylene-isoprene rubber or IIR) has a very low permeability rate andgood electrical properties, but poor short-term rebound.

B0318-70 AMS 3238 -75 to 250 BLACK

B0612-70 Vacuum, General Purpose -75 to 250 BLACK

B1167-80 Vacuum, General Purpose -75 to 250 BLACK


Phone: (859) 269-2351 • Fax: (859) 335-5128www.parkerorings.com9


POLYACRYLATE (ACM)ACM (acrylic rubber) has good resistance to mineral oil, oxygen and ozone. The watercompatibility and cold flexibility of ACM are considerably worse than those with NBR.

TEMP. RANGE

COMPOUND NO. RECOMMENDED FOR (Degrees° F) COLOR

ETHYLENE ACRYLATE (AEM)Ethylene acrylate is a mixed polymer of ethylene, methyl acrylate, and a small amount ofcarboxylated cure-site monomer. Developed as a lower-temperature version ofPolyacrylate, but swells slightly more. Polymer is sold under the tradename VAMAC®.

BUTYL RUBBER (IIR)Butyl rubber (isobutylene-isoprene rubber or IIR) has a very low permeability rate andgood electrical properties, but poor short-term rebound.

Note: Compound numbers in (XXXXX) are the obsolete Wynn’s Precision compoundnumbering system.

MATERIAL O

FFERING

10


CHLOROPRENE RUBBER (CR)Also known by the tradename Neoprene, polychloroprene was the first synthetic rubberand exhibits generally good ozone, aging, and chemical resistance. It has good mechanicalproperties over a wide temperature range.

C0267-50 MIL-G-1149 Ty I Cl I -60 to 250 BLACKAMS 3208, Low Temp.

C0518-60 General Purpose -35 to 225 BLACK

C0557-70 Drive Belt -35 to 250 BLACK

C0873-70 General Purpose -35 to 225 BLACK

C0944-70 General Purpose -35 to 250 RED

C1124-70 AMS-R-6855C Cl 2, Gr 70 -60 to 250 BLACKAMS 3209, Low Temp.

C1276-70 Low Compression Set -35 to 250 BLACK

CL172-70 (2347) Internally Lubed -35 to 225 BLACK

C1278-80 Low Compression Set -35 to 250 BLACK

CB173-80 (2598) Good Retained Resilience -35 to 250 BLACK

ETHYLENE PROPYLENE RUBBER (EPM, EPR, EPDM) EPM (EPR) is a copolymer of ethylene and propylene. EPDM is a terpolymer of ethylene, propylene, and a diene third monomer used for cross-linking.

E1100-50 General Purpose -70 to 250 BLACK

EA454-50 (3575) UL Listed -70 to 250 BLACK


E1561-60 NSF 61, KTW, WRAS -70 to 250 BLACK

EB151-60 (3806) Good Low Temp -70 to 250 BLACK

E0751-65 Drive Belt Applications -70 to 250 BLACK


E0667-70 Auto Disc Brakes -70 to 250 BLACK


E1022-70 Internally Lubed, Brakes -70 to 250 BLACK

ETHYLENE PROPYLENE RUBBER (EPM, EPR, EPDM) EPM (EPR) is a copolymer of ethylene and propylene. EPDM is a terpolymer of ethylene, propylene, and a diene third monomer used for cross-linking.

TEMP. RANGE


POLYCHLOROPRENE RUBBER (CR)Also known by the tradename Neoprene, polychloroprene was the first synthetic rubberand exhibits generally good ozone, aging, and chemical resistance. It has goodmechanical properties over a wide temperature range.




E1028-70 FDA -70 to 250 BLACK

E1244-70 NSF 61, Internally Lubed -70 to 250 BLACK

E1257-70 NSF 61, -70 to 250 BLACKChloramine Resistant

E1549-70 NSF 61, WRAS, KTW -70 to 250 BLACK


E1571-70 NSF 61 -70 to 250 BLACK


E3609-70 NSF51, NSF 61, WRAS, -70 to 250 BLACKKTW, FDA, USP Class VI

EB165-70 (3477) Steam, High Temp Water -70 to 250 BLACK

E0692-75 Steam, High Temp Water -70 to 250 BLACK

E0740-75 Nuclear Applications -70 to 250 BLACK

EJ150-75 (3077) FDA, USP Class VI -70 to 250 BLACK

EJ151-80 (3958) NSF 61, WRAS, KTW -70 to 250 BLACK

E0515-80 MIL-P-82744 -70 to 250 BLACK


E0893-80 General Purpose -70 to 250 PURPLE

E1267-80 NAS 1613 -70 to 250 BLACK

E0652-90 General Purpose, -60 to 250 BLACKBack-Up Rings

E0962-90 Excellent Steam to 500° F, -60 to 250 BLACKED Resistant

ETHYLENE PROPYLENE CAN TYPICALLY BE USED AT 300 - 400° F IN A COMPATIBLE FLUID. FOR SPECIFIC INFORMATION, CONSULT A PARKERAPPLICATIONS ENGINEER.

11


TEMP. RANGE



EPM, EPR, EPDM - continued



MATERIAL O

FFERING

12


FLUOROSILICONE (FVMQFluorosilicone is a silicone polymer chains with fluorinated side-chains for improved oiland fuel resistance. The mechanical and physical properties are very similar to those ofsilicone.

LM151-50 (11645) General Pupose -100 to 350 BLUE

LM152-60 (11646) General Purpose -100 to 350 BLUE

LM158-60 AMS-R-25988, TY 1, CL 1, -100 to 350 BLUE

GR 60, AMS 3325

L1223-60 AMS-R-25988, TY 1, -100 to 350 BLUECL I, Gr 60, AMS 3325


LM159-70 AMS-R-25988,TY 1, CL 1, -100 to 350 BLUE

GR 70

L1120-70 AMS-R-25988, TY I, -100 to 350 BLUECL I, GR 70, UL listed


L1077-75 AMS-R-25988, -90 to 350 BLUETY I,CL III,GR 75


LM160-80 AMS-R-25988, TY 1, CL 1, -90 to 350 BLUE

GR 80

L1218-80 AMS-R-25988, -90 to 350 BLUETY I, CL I, GR 80

L1186-80 PTFE Loaded -85 to 350 RUST

ACRYLONITRILE-BUTADIENE (NBR)Nitrile rubber (NBR) is the general term for acrylonitrile-butadiene terpolymer. Theacrylonitrile content of nitrile sealing compounds varies considerably (18 to 50%.)Polymers with higher ACN content exhibit less swell in gasoline and aromatic solvents,while lower ACN polymers exhibit better compression set and low temperature flexibility.Polymer is also called Buna-N.

N0545-40 AMS 3201 -45 to 225 BLACK

NB100-40 (1454) General Purpose -45 to 225 BLACK

TEMP. RANGE


FLUOROSILICONE (FVMQ)Fluorosilicone is a silicone polymer chain with fluorinated side-chains for improved oiland fuel resistance. The mechanical and physical properties are very similar to those ofsilicone.




ACRYLONITRILE-BUTADIENE (NBR)Nitrile rubber (NBR) is the general term for acrylonitrile-butadiene terpolymer. Theacrylonitrile content of nitrile sealing compounds varies considerably (18 to 50%).Polymers with higher ACN content exhibit less swell in gasoline and aromatic solvents,while lower ACN polymers exhibit better compression set and low temperature flexibility.Polymer is also called Buna-N.

13


N0299-50 AMS 3205, UL listed -55 to 225 BLACK

NA192-50 (8305) General Purpose -55 to 225 BLACK

NL151-50 (8315) Internally Lubed -55 to 225 BLACK

N0406-60 AMS-R-6855 CL 1, -40 to 225 BLACKCL 1, GR 60

N0525-60 AMS 3212, AMS 3220 -25 to 250 BLACK

N1219-60 NSF 51, FDA -30 to 225 BLACK

NF162-65 (1106) Fuel Resistant, UL Listed -25 to 250 BLACK

N0506-65 AMS 7271 -70 to 180 BLACK

NX352-70 (7727) Carboxylated -25 to 250 BLACK

NJ253-70 (7077) FDA -35 to 212 BLACK

NF153-70 (7657) Fuel Resistant, -35 to 180 BLACKSAE 120R1 Class II

NA151-70 (8307) General Purpose -30 to 250 BLACK

NL153-70 (8317) Internally Lubed -30 to 250 BLACK

NA153-70 (8497) Automotive Applications -30 to 250 BLACK

47-071 AMS-R-7362 -60 to 180 BLACK

N0103-70 Low Temp. -55 to 225 BLACK

N0287-70 Synthetic Lubricant -35 to 250 BLACKResistant, AMS 7272

N0497-70 Low Swell, SAE 120R1 -35 to 212 BLACKCL ll UL listed

N0602-70 General Purpose, -70 to 180 BLACKAMS-P-5315, Low Temp

N0674-70 General Purpose -30 to 250 BLACKMIL-G-21569, Cl I, UL listed

N0757-70 NSF 61, UL listed -30 to 225 BLACK

N0818-70 Internally Lubed -30 to 250 BLACK

TEMP. RANGE



NBR - continued



MATERIAL O

FFERING

14


TEMP. RANGE


N0828-70 Internally Lubed, Low Set -30 to 225 BLACK

N1069-70 FDA -30 to 180 BLACK

N1220-70 NSF 51, FDA -30 to 225 BLACK

N1470-70 General Purpose -40 to 225 BLACK

N1499-70 General Purpose, UL -30 to 250 BLACK

N1510-70 NSF 61 -30 to 225 BLACK

N1517-70 NSF 61 -30 to 225 BLACK

N1527-70 UL Listed -30 to 225 BLACK

NW163-75 (40601) Internally Lubed -30 to 225 RUST

NM156-75 (7377) Good Low Temp -65 to 225/250 BLACK

N0304-75 MIL-P-25732 -65 to 225/250 BLACK

N0508-75 FDA, USDA -30 to 180 BLACK

N0756-75 AMS-P-83461 -65 to 250/275 BLACK

N0951-75 High Temp, Low Compression Set -25 to 275 BLACK

N1500-75 Low Swell, UL Listed, -35 to 212 BLACKFuel applications



NA155-80 (7538) Abrasion Resistant -25 to 250 BLACK

N0750-80 Carboxylated -25 to 250 BLACK

N1090-85 "ELF" Pneumatic, -25 to 225 BLACKCarboxylated

NB107-90 (1929) Extrusion Resistant -25 to 225 BLACK

N0300-90 Back Up Rings -40 to 180 BLACK

N0507-90 AMS-P-5510, Low Temp -65 to 180 BLACK


N0702-90 Low Compression Set -30 to 275 BLACK

N1210-90 Low Comp Set, Ext. Res. -30 to 275 BLACK

N1444-90 Parbaks only -30 to 250 BLACK



NBR - continued



15


TEMP. RANGE


HYDROGENATED NITRILE (HNBR, HSN)Hydrogenated nitrile was developed as an air-resistant variant of nitrile rubber. In HNBR,the carbon-carbon double bonds in the main polymer chain are saturated with hydrogenatoms in a process called “hydrogenation” that improves the material’s thermal stability andoxidation resistance.

KB190-50 (21705) Automotive Applications -25 to 300/325 BLACK

KA170-55 (21105) High Swell, UL Listed -25 to 300/325 BLACK

KB181-60 (21926) Diesel Applications -25 to 300/325 BLACK

N1173-70 General Purpose -25 to 300/325 BLACK

N1195-70 Refrigerants -25 to 300/325 GREEN

N1206-70 Low Temperature -40 to 300/325 GREEN

N1239-70 Refrigerants -25 to 300/325 RED

KB153-70 (21337) Automotive Applications -25 to 300/325 BLACK

KW157-70 (21607) Refrigerants -25 to 300/325 GREEN

KB161-70 (21377) High Temp Hydraulics -25 to 300/325 BLACK

KA182-75 (21207) High Swell, -25 to 300/325 BLACKAuto Applications

KA174-75 (21107) 75 Duro, General Purpose -25 to 300/325 BLACK

N1231-80 Explosive Decompression -25 to 300/325 BLACK



POLYURETHANE (AU, EU)Polyurethane elastomers have excellent wear resistance, high tensile strength and highelasticity in comparison with any other elastomers. Permeability is good and comparablewith butyl. Millable urethanes should not be confused with thermoplastic urethanes, whichare generally harder, less flexible, and have slightly better wear resistance.

P0642-70 Drive Belt Applications, -40 to 180 BLACK

HYDROGENATED NITRILE (HNBR, HSN)Hydrogenated nitrile was developed as an air-resistant variant of nitrile rubber. In HNBR,the carbon-carbon double bonds in the main polymer chain are saturated with hydrogenatoms in a process called “hydrogenation” that improves the material’s thermal stabilityand oxidation resistance.


POLYURETHANE (AU, EU)Polyurethane elastomers have excellent wear resistance, high tensile strength and highelasticity in comparison with any other elastomers. Permeability is good and comparablewith butyl. Millable urethanes should not be confused with thermoplastic urethanes,which are generally harder, less flexible, and have slightly better wear resistance.



MATERIAL O

FFERING

16


Millable TypeSILICONE RUBBER (VMQ, PVMQ)Silicone elastomers have relatively low tensile strength, poor tear and wear resistance.Silicones also possess good insulating properties and tend to be physiologically neutral.

S0469-40 AMS 3301 -75 to 400 RUST

S0802-40 FDA -60 to 400 WHITE

SM150-40 (11354) FDA -60 to 400 RUST

S0595-50 AMS 3302 -70 to 400 RUST

S0899-50 ZZ-R-765 CL 1a,1b,2a,2b -103 to 400 RUSTGR 50, AMS 3345

SM151-50 (11355) FDA, UL -70 to 400 RUST

S1538-55 FDA, USP Class VI -60 to 450 TRANS

S0317-60 FDA, USDA -103 to 450 RUST

S0613-60 ZZ-R-765 Cl 2b, Gr 60, -60 to 450 RUSTAMS 3303

SM152-60 (11356) AMS 3303, UL, FDA -60 to 450 RUST

SB160-65 (11486) Coolant Applications -60 to 450 RUST

S0383-70 ZZ-R-765 Cl 1a, 1b, -175 to 400 RUSTGr 70, AMS 3337

S0455-70 High Temperature -65 to 450/500 RUST

S0604-70 ZZ-R-765 Cl 2a, 2b, Gr 70 -65 to 450 RUSTAMS 3304, AMS 3357MIL-G-21569

S1138-70 FDA -60 to 400 RUST

S1224-70 ZZ-R-765 Cl 2a, 2b, Gr 70 -65 to 450 RUSTAMS 3304, AMS 3357MIL-G-21569

SM153-70 (11357) UL Listed, FDA -60 to 450 RUST

SB174-70 (11227) General Purpose -60 to 450 BLACK

SB161-70 (11707) Low Compression Set -60 to 450 RUST

S0355-75 AMS 7267, FDA, USDA -60 to 450 RUST

S0614-80 ZZ-R-765 Cl 2a, 2b -65 to 450 RUSTGr 80, AMS 3305

TEMP. RANGE





SILICONE RUBBER (VMQ, PVMQ)Silicone elastomers have relatively low tensile strength, poor tear and wear resistance.Silicones also possess good insulating properties and tend to be physiologically neutral.

17


FLUOROCARBON (FKM, FPM)

V0986-50 General Purpose -15 to 400 BROWN


V0769-60 General Purpose -15 to 400 BLACK

VA150-65 (19356) General Purpose -15 to 400 BLACK

V1262-65 Low Swell - Flex Fuel -15 to 400 BLACKBlends UL listed

V0494-70 Acid Resistant -15 to 400 BLACK

V0680-70 FDA, USDA, NSF 51 -15 to 400 RED

V0834-70 Acid Resistant, Steam -15 to 400 BLACK

VW153-75 (16207) General Purpose -15 to 400 BROWN

VA203-75 (16737) Extrusion Resistant, -15 to 400 BLACKDiesel Fuel Injectors

VW173-75 (19457) Automotive Applications -15 to 400 GREEN

VB184-75 (19487) Transmission Applications -15 to 400 BLACK

VG183-75 (19657) Low Temp./”GLT Type” -40 to 400 BLACK

VB153-75 (19717) Good Compression Set, -15 to 400 BLACKFuels

VG162-75 (19727) Good Fuel Resistance -15 to 400 BLACK

V0747-75 AMS-R-83248, TY I, CL I -15 to 400 BLACKUL listed

V0835-75 AMS-R-83485, “GLT Type” -40 to 400 BLACK

V0848-75 PTFE Loaded -15 to 400 BLACK

V0884-75 General Purpose, UL listed -15 to 400 BROWN

V1163-75 "GFLT Type”, UL listed -35 to 400 BLACK

V1164-75 Low Set, AMS 7276, -15 to 400 BLACKAMS-R-83248, TY I, CL I

TEMP. RANGE


FLUOROCARBON (FKM, FPM)Fluorocarbon (FKM) has excellent resistance to high temperatures and a broad range of chemicals. Permeability and compression set are excellent.




MATERIAL O

FFERING

18


TEMP. RANGE


V1226-75 Low Set, -15 to 400 BROWN

AMS 7276, UL listedAMS-R-83248, TY I, CL I

V1260-75 Very Chemically Resistant -15 to 400 BLACK"Viton Extreme" Type

V1263-75 Low Swell - Flex Fuel -15 to 400 BLACKBlends UL listed

V1436-75 General Purpose, -15 to 400 BLACKUL Listed



VA151-75 (19357) General Purpose, UL -15 to 400 BLACK

VA163-80 (19318) Internally Lubed -15 to 400 BLACK

V0965-80 Low Swell, "GF Type” -15 to 400 BLACK

V0709-90 AMS-R-83248, TY I, Cl II -15 to 400 BLACKAMS 7259


V1264-90 Low Swell - Flex Fuel -15 to 400 BLACKBlends, UL listed



VA153-90 (19359) General purpose -15 to 400 BLACK

VW155-90 (16129) General Purpose -15 to 400 GREEN

V1238-95 Extrusion Resistant -15 to 400 BLACKExplosive Decompression

VA154-95 (16949) Extrusion Resistant -15 to 400 BLACK


FKM, FPM - continued



TETRAFLUOROETHYLENE - PROPYLENE (AFLAS)This material is a copolymer of TFE and propylene. Its chemical resistance is excellent

across a wide range of aggressive media. Polymer is sold under the tradename Aflas®.

V1006-75 General Purpose 25 to 450 BLACK

VP101-80 (20018) General Purpose 25 to 450 BLACK

VP102-80 Good Compression 15 to 450 BLACKSet Resistance

V1041-85 ED Resistant 15 to 450 BLACK

VP103-90 (20019) Extrusion Resistant 25 to 450 BLACK

HIGHLY FLUORINATED ELASTOMER (HiFluor)Hifluor is Parker’s tradename for high performance fluoroelastomers – materials that “bridge the gap” between traditional fluorocarbon and perfluoroelastomer.

HF351-65 FDA, USP Class VI, -15 to 400 TRANS

Low Outgassing

V3819-75 Chemically Resistant, -15 to 400 BLACKLow Compression Set

V8534-90 Chemically Resistant, -15 to 400 BLACKExtrusion Resistant

19


TEMP. RANGE


TETRAFLUOROETHYLENE - PROPYLENE (AFLAS™)This material is a copolymer of TFE and propylene. Its chemical resistance is excellent across a wide range of aggressive media. Polymer is sold under the tradename Aflas™.

HIGH PERFORMANCE FLUOROELASTOMERS (Hifluor™)Hifluor is Parker’s tradename for high performance fluoroelastomers – materials that “bridge the gap” between traditional fluorocarbon and perfluoroelastomer.


Hifluor™ is a trademark of Parker Hannifin Corporation.



MATERIAL O

FFERING

20


PERFLUOROELASTOMER (Parofluor)Perfluoroelastomer is essentially a rubber version Available fromE. Sold by Parker underthe tradenames Parofluor™ and Parofluor ULTRA.

V1266-65 Plasma, Low Closure 5 to 572 WHITEForce

V8545-75 AMS 7257, High Temp., 5 to 572 BLACKFDA

V8562-75 Low Leachables, FDA 5 to 572 WHITE

V8581-90 Plasma, Low Outgassing 5 to 572 WHITE

V8588-90 Chemically Resistant, 5 to 536 BLACKExtrusion & ED Resistant

What is Parofluor™?The Parofluor Series consists of advancedperfluorinated elastomers (FFKMs) developedand produced exclusively by Parker Hannifin.Parofluor materials exhibit outstandingretained resiliency as compared with otherperfluorinated elastomers, because they'reformulated specifically for use in the mostdemanding sealing applications.

TEMP. RANGE

COMPOUND NO. RECOMMENDED FOR Degrees° F COLOR

PERFLUOROELASTOMER (Parofluor)Perfluoroelastomer is a rubber version of PTFE. Available from Parker under thetradenames Parofluor™ and Parofluor ULTRA™.

Parofluor™ and Parofluor ULTRA™ are trademarks of Parker Hannifin Corporation.



21


PERFLUOROELASTOMER (Parofluor Ultra)Perfluoroelastomer is essentially a rubber version of PTFE. Sold by Parker under the

tradenames Parofluor™ and Parofluor ULTRA.

FF354-65 Low Closure Force 5 to 600 WHITE

FF102-75 Acid Resistant 5 to 525 BLACK

FF200-75 Low Comp Set, AMS7257 5 to 608 BLACK

FDA

FF350-75 Plasma, High Purity, FDA 5 to 600 WHITE

USP Class VI

FF352-75 General Purpose, Clean 5 to 600 WHITE

FF500-75 Broad Chemical 5 to 525 BLACKResistance, FDA

FF202-90 Extrusion Resistant, 5 to 608 BLACKLow Compression Set

TEMP. RANGE

COMPOUND NO. RECOMMENDED FOR Degrees° F COLOR

PERFLUOROELASTOMER (Parofluor Ultra)Perfluoroelastomer is a rubber version of PTFE. Available from Parker under thetradenames Parofluor™ and Parofluor ULTRA™.

What is Parofluor ULTRA™

Parofluor ULTRA is the nextgeneration of high performanceperfluorinated elastomers within theParofluor family. These materialsoffer ultra high temperatureresistance up to 320°C (608°F),broad chemical resistance and ultrahigh purity.

For the latest information on Parker Perfluorinated Elastomers,visit www.parofluor.com or contact 1-800-C-PARKER



MATERIAL O

FFERING

22


N1527-70 (67147)

SM153-70 (11357)

V0747-75

VA151-75 (19357)

V0884-75

V1163-75

V1226-75

V1262-65

V1263-75

V1264-90

EA454-50 (3575)

L1120-70

N0299-50

N0497-70

N0674-70

N0757-70

N1499-70

N1500-75

N1591-75 (67357)

KA170-50 (21105)

N1565-75 (67027)

Sui

tabl

e fo

r us

e in

UL

1081

Sui

tabl

e fo

r us

e in

UL2

62 a

pplic

atio

ns

Sui

tabl

e fo

r U

L25

gask

et a

pplic

atio

ns

Dry

Che

mic

al, C

arbo

n D

ioxi

de, W

ater

Fire

Ext

ingu

ishi

ng A

gent

s

Gas

olin

e

Gas

olin

e/A

lcoh

ol B

lend

s*

Nap

tha

or K

eros

ene

MP

S G

as

MF

G o

r N

atur

al G

as

Die

sel F

uel,

Fue

l Oil,

Lub

ricat

ing

Oil

Hea

ted

Fue

l Oil

Anh

ydro

us A

mm

onia

LP-G

as

Laun

dry

Det

erge

nts

Dis

hwas

hing

Det

erge

nts

CODE

SERVICE

A B C D E F G H I J L M

Underwriters Laboratories Approved Services*

NF162-65 (1106)

SM151-50 (11355)

SM152-60 (11356)

* Contact factory for additional information regarding specific ratios of alcohol (methyl and/orethyl) and gasoline.

V1436-75



23


FDA, USDA, NSF 51, USP Approved Compounds

The Food and Drug Administration (FDA) has established a list of rubbercompounding ingredients which tests have indicated are neither toxic norcarcinogenic. Rubber compounds produced entirely from those ingredients andwhich also pass the FDA extraction tests are said to "meet the FDA requirements."The FDA does not approve rubber compounds. It is the responsibility of themanufacturer to compound food grade materials from the FDA list of ingredients andestablish whether they pass the necessary extraction requirements. Similarstandards are established by the United States Department of Agriculture (USDA).

Additional requirements have been imposed upon seal manufacturers regardingfood and beverage service. Parker has developed several materials that are certifiedto NSF 51, Food and Beverage Standard. In critical medical applications, seals oftenmust be made from an even "cleaner" list of ingredients. The U.S. Pharmacopoeia(USP) Class VI outlines requirements for system toxicity and intracutaneous toxicityfor these "cleaner" compounds. The USP Class VI compounds must be made fromingredients with clear histories of biocompatibility that meet tighter requirements forleachates.

Typical applications for our FDA, NSF 51, USDA materials are disposable medicaldevices, surgical instruments and medical fluid dispensing components, as well as awide variety of food and beverage handling equipment. The type ofapproval/certification required generally rests with the end customer's regulatoryexpectations for the specific application.

E1028-70 EPDM 70 Black FDAE1549-70 (63447) EPDM 70 Black NSF 51E1583-70 (63017) EPDM 70 Black NSF 51E3609-70 EPDM 70 Black NSF 51, FDA,

USP Class VIEJ150-75 (3077) EPDM 75 Black FDA, USP Class VIFF200-75 FFKM 75 Black FDAFF350-75 FFKM 75 White FDA, USP Class VIFF500-75 FFKM 75 Black FDAV8545-75 FFKM 75 Black FDAV8562-75 FFKM 75 White FDAHF351-65 FKM 65 Translucent FDA, USP Class VIV0680-70 FKM 70 Red NSF 51, FDA, USDA N1219-60 NBR 60 Black NSF 51, FDAN1069-70 NBR 70 Black FDAN1220-70 NBR 70 Black NSF 51, FDANJ253-70 (7077) NBR 70 Black FDAN0508-75 NBR 75 Black FDA, USDAS0802-40 VMQ 40 White FDA SM151-50 (11355) VMQ 50 Rust FDAS1538-55 VMQ 55 Translucent FDA, USP Class VI SM152-60 (11356) VMQ 60 Rust FDA S0317-60 VMQ 60 Rust FDA, USDA S1138-70 VMQ 70 Rust FDASM153-70 (11357) VMQ 70 Rust FDAS0355-75 VMQ 75 Rust FDA, USDA

PARKER HARD-COMPOUND POLYMER NESS COLOR SERVICE



MATERIAL O

FFERING

24


NSF 61 Approved Compounds

NSF 61 - Drinking Water System Components - is the nationally recognizedhealth effects standard for all devices, components and materials which contactdrinking water. Parker’s O-Ring Division has developed several materials thatare certified to NSF 61. Many of these materials are approved for use in theUnited Kingdom (WRAS), and Germany (KTW) as well as North America.

NSF International - is an industry regulating agency that was established in1944. Recognized by ANSI (American National Standards Institute), NSFmaintains qualification standards and criteria for a wide range of products,including potable water components and delivery systems.

E1583-70 (63017) EPDM 70 Commercial NSF 61 Internally Hot ** lubricated, ideal for

high volume applications

E1561-60 (63446) EPDM 60 Commercial NSF 61, WRAS, KTW, Hot ** ideal for high volume

applications

E1549-70 (63447) EPDM 70 Commercial NSF 61, WRAS, KTW, Hot ** excellent compression

set resistance, ideal for high volume applications

E1570-70 EPDM 70 Commercial NSF 61 Internally Hot ** lubricated

E1571-70 EPDM 70 Commercial NSF 61Hot **

E1244-70 EPDM 70 Commercial NSF 61 Internally Hot ** lubricated

E1257-70 EPDM 70 Commercial NSF 61 Chloramine Hot ** Resistant

E3609-70 EPDM 70 Commercial NSF 61, WRAS, KTW, Hot ** excellent compression

set resistance

EJ151-80 (3958) EPDM 80 Commercial NSF 61, WRAS, KTWHot **

N1517-70 Nitrile 70 Commercial NSF 61Hot **

N1510-70 (67997) Nitrile 70 Commercial NSF 61 Hot **

N0757-70 Nitrile 70 Cold NSF 61 Water***

WATERPARKER POLYMER HARD- CONTACT SERVICECOMPOUND NESS TEMP

* NSF 61 listed materials given a commercial hot water rating are also certified for cold water** Commercial Hot = Tested at 82° C (180° F) (Commercial Hot)*** Cold Water = Tested at 23° C (73.4° F)



25


AMS3201 N0545-40 35-45 Dry Heat Resistance

AMS3205 N0299-50 45-55 Low Temperature Resistance

AMS3208 C0267-50 45-55 Weather Resistant, Chloroprene Type

AMS3209 C1124-70 65-75 Weather Resistant, Chloroprene Type

AMS3212 N0525-60 55-65 Aromatic Fuel Resistant

AMS3220 N0525-60 55-65 General Purpose, Fluid Resistant

AMS3238 B0318-70 65-75 Phosphate-Ester Resistant, Butyl Type

AMS3301 S0469-40 35-45 Silicone, General Purpose




S0604-70


AMS3325 L1223-60 55-65 Fluorosilicone Rubber, Fuel and

Oil Resistant

AMS3337 S0383-70 65-75 Silicone, Extreme Low Temperature

Resistant

AMS3345 S0899-50 45-55 Silicone Rubber

AMS3357 S1224-70 65-75 Silicone Rubber, Lubricating Oil,

S0604-70 Compression Set Resistant

AMS7257 V8545-75, 70-80 Sealing Rings, Perfluorocarbon,

FF200-75 High Temperature Resistant

AMS7259 V0709-90 85-95 High Temp, Fluid Resistant, Very Low

Compression Set FKM

AMS7267 S0355-75 70-80 Silicone, Heat Resistant, Low

Compression Set

AMS7271 N0506-65 60-70 Fuel and Low Temperature Resistant

AMS(1) and NAS(2) Rubber Specification DescriptionsRUBBER PARKER DESCRIPTIONSPECS COMPOUND DUROMETER TITLE

Aerospace Materials

(1) Aerospace Material Specification issued by the Society of Automotive Engineers, Inc.(2) National Aerospace Standard issued by Aerospace Industries Association of America, Inc.



MATERIAL O

FFERING

26


AMS7272 N0287-70 65-75 Synthetic Lubricant Resistant

AMS7276 V1164-75 70-80 High Temp. Fluid Resistant, Very Low

V1226-75 Compression Set FKM

NAS1613 E1267-80 75-85 Packing, O-ring, Phosphate

Ester Resistant

AMS-P-5315 N0602-70 65-75 Packing O-ring, Hydrocarbon Fuel

Resistant

AMS-P-5510 N0507-90 85-95 Gasket, Straight Thread Tube Fitting

Boss

AMS-R-6855 N0406-60, 55-75 Synthetic Rubber Sheets, Strips,

C1124-70 Molded or Extruded Shapes,

Synthetic Oil Resistant

AMS-R-7362 47-071 65-75 Rubber, Sheet, Molded and Extruded

Shapes, Synthetic Oil Resistant

AMS-P-25732 N0304-75 70-80 Packing, Preformed, Petroleum

Hydraulic Fluid Resistant,

Limited Performance

AMS-R-25988 L1223-60, 55-85 Rubber, Fluorosilicone

L1120-70, Elastomer, Oil and Fuel Resistant

L1218-80,

L1077-75

LM158-60

LM159-70

LM160-80

AMS-R-83248 V1164-75,

V1226-75,

V0747-75 70-95 Rubber, Fluorocarbon Elastomer, High

V0709-90 Temperature Fluid and Compression

Set Resistant

AMS-P-83461 N0756-75 70-80 Packings, Preformed, Petroleum

Hydraulic Fluid Resistant,

Improved Performance

AMS-R-83485 V0835-75 70-80 Rubber, Fluorocarbon Elastomer,

Improved Performance at

Low Temperatures

AMS(1) and NAS(2) Rubber Specification DescriptionsRUBBER PARKER DESCRIPTIONSPECS COMPOUND DUROMETER TITLE

(1) Aerospace Material Specification issued by the Society of Automotive Engineers, Inc.(2) National Aerospace Standard issued by Aerospace Industries Association of America, Inc.



27


ZZ-R-765E Rubber, Silicone

Class Grade Temperature Range(1)

1a. 1b. 2a. 2b. 50 S0899-50 - 103 to 437°F (-75 to 225°C) Low and High

Temperature Resistant, Low Compression Set

1a. 1b 70 S0383-70 - 103 to 437°F (-75 to 225°C) Low Temperature

Resistant, Low Compression Set

2a. 2b 80 S0614-80 - 80 to 437°F (-62 to 225°C) High Temperature

Resistant, Low Compression Set

2a. 2b 70 S1224-70 - 80 to 437°F (-62 to 225°C) High Temperature

S0604-70 Resistant, Low Compression Set

MIL-G-1149C - Gasket Materials, Synthetic Rubber, 50 and 65 Durometer Hardness

Type I (-20 to 212°F) (-29 to 100°C) (1)

Class 1 C0267-50

MIL-R-3533B - Rubber, Synthetic; Sheet, Strip and Molded

Type I (-20 to 158°F) (-29 to 70°C) (1)

Grade B N0602-70

MIL-P-5315B - Packing, O-ring, Hydrocarbon Fuel Resistant (Jet Fuels) (Military

O-ring series MS29512 and MS29513)

N0602-70 (-65 to 160°F) (-54 to 71°C)

MIL-P-5510C - Gasket, Straight Thread Tube Fitting Boss (MIL-H-5606 Petroleum

Based Hydraulic Fluid)

N0507-90 (-45 to 160°F) (-43 to 71°C)(1) (Military O-ring

series MS28778)

MIL-R-6855D - Synthetic Rubber Sheets, Strips, Molded or Extruded Shapes

(-65 to 212°F) (-54 to 100°C)(1)

Class 1 Grade 60 N0406-60 Fuel and Petroleum Oil Resistant

Class 2 Type B Grade 70 C1124-70 Petroleum Oil, Weather and Ozone Resistant

Military Rubber SpecificationsNote: In compliance with the Federal Acquisition Streamlining Act (FASA), most of these specifications are being revised to AMS specifications. For the most current information, contact the O-Ring Division.

RUBBER PARKER DESCRIPTIONSPECS COMPOUND

(1) These temperatures are limits for particular tests required by the specifications, but they do not necessarilyrepresent operating temperature limits.



MATERIAL O

FFERING

28


MIL-R-7362D - Rubber, Sheet, Molded and Extruded Shapes, Synthetic Oil

Resistant (AMS3021)

Types I, II 47-071 Synthetic, Di-Ester Base Lubricant

(-65 to 275°F) (-54 to 135°C)(1)

(Military O-ring series MS29561 and WAS617)

MIL-G-21569B - Gaskets, Cylinder Liner Seal, Synthetic

Class I N0674-70 (Room temperature to 194°F) (RT to 90°C)

Class II S0604-70

MIL-P-25732C - Packing, Preformed, Petroleum Hydraulic Fluid Resistant (MIL-H-5606)

N0304-75 Petroleum Base Hydraulic Fluid

(-65 to 275°F) (-54 to 135°C)(1)

(Military O-ring series MS28775)

MIL-R-25988 - Rubber Fluorosilicone Elastomer, Oil and Fuel Resistant (MIL-H-5606

Petroleum Base) Hydraulic Fluid, Fuel, Air (-90 to 350°F)

(-68 to 176°C)(1)

Type 1, Class 1, Grade 60/3 L1223-60, LM158-60



Type 1, Class 3, Grade 75/2 L1077-75

MIL-P-82744 - Packing, Preformed, Otto Fuel Compatible (-65 to 250°F)

(-54 to 121°C)

E0515-80

MIL-R-83248C, Type I - Rubber, Fluorocarbon Elastomer, High Temperature Fluid

and Compression Set Resistant (-15 to 400°F) (-5 to 105°C)

Class I V0747-75, V1164-75, V1226-7

Class 2 V0709-90

MIL-R-83485 Grade 80 V0835-75 Rubber, fluorocarbon Elastomer, Improved

performance @ low Temp

MIL-P-83461B - Packings, Preformed, Petroleum Hydraulic Fluid Resistant, Improved

Performance

N0756-75 (-65 to 275°F) (-54 to 135°C)(1)

RUBBER PARKER DESCRIPTIONSPECS COMPOUND

(1) These temperatures are limits for particular tests required by the specifications, but they do not necessarilyrepresent operating temperature limits.



ENGINEERING

TOO

LS

29


EngineeringTools

The following charts are included to facilitate engineering analysis.Additional information is available in the Parker Handbook (ORD 5700)

or online at www.parkerorings.com



30


.070

Cro

ss S

ectio

n

Com

pres

sion

Loa

d pe

r Li

near

Inch

of S

eal —

Pou

nds

.1

40%

9080

80

30%

20%

10% 5%

.2.3

.4.5

.6.7

.82

22

33

34

44

55

56

66

77

78

88

99

910

100

1000

.91

Percent Compression70

70

70

70

60

60

60

50

50

50

80

9080

90

6050

9080

7060

50

Shore

A H

ardn

ess

90

Compressive Load Charts



31


Compressive Load Charts - Continued

.103

Cro

ss S

ectio

n

Com

pres

sion

Loa

d pe

r Li

near

Inch

of S

eal —

Pou

nds

.1

40%

30%

20%

10% 5%

.2.3

.4.5

.6.7

.82

22

33

34

44

55

56

66

77

78

88

99

910

100

1000

.91


70

70

60

60

60

50

50

50

80

9080

90

50

9080

7060

50

Shore

A H

ardn

ess

9080 90

8070

60



ENGINEERING

TOO

LS

32



.139

Cro

ss S

ectio

n

Com

pres

sion

Loa

d pe

r Li

near

Inch

of S

eal —

Pou

nds

.1

40%

30%

20%

10% 5%

.2.3

.4.5

.6.7

.82

22

33

34

44

55

56

66

77

78

88

99

910

100

1000

.91


70

70

60

60

50

50

80

9080

90

6050

90

7060

50

Shore

A H

ardn

ess

9080

90

70

60

50 80

80



33



.1

40%

30%

20%

10% 5%

.2.3

.4.5

.6

Percent Compression

Com

pres

sion

Loa

d pe

r Li

near

Inch

of S

eal —

Pou

nds

.7.8

22

23

33

44

45

55

66

67

77

88

89

99

1010

010

00.9

1

90

7060

50

80

.210

Cro

ss S

ectio

n

70

70

7060

50

50

9080

90

60

Shore

AHar

dnes

s

9080 90

70

60

50

80

60 80

50



ENGINEERING

TOO

LS

34



Com

pres

sion

Loa

d pe

r Li

near

Inch

of S

eal —

Pou

nds

.1.2

.3.4

.5.6

.7.8

22

23

33

44

45

55

66

67

77

88

89

99

1010

010

00.9

1

40%

30%

20%

10% 5%

Percent Compression

.275

Cro

ss S

ectio

n

70

70

7060

50

50 9080

90

90

7060

50

Shore

A H

ardn

ess

9080

90

70

60

50

80

80

60

80

5060



35


Total Diametral Clearance*(Radial Clearance if Concentricity Between Piston and

Cylinder is Rigidly Maintained)

In.mm

Flui

dP

ress

ure

(Bar

) FluidP

ressure(P

SI)

690.0 10,000552.0 8,000414.0 6,000

276.0 4,000

207.0 3,000

138.0 2,000

69.0 1,00055.2 800

41.4 600

27.6 400

20.7 300

13.8 200

6.9 10000

.3.010

.5.020

.8.030

1.0.040

Extrusion

70 80 90HardnessShore A

Limits for Extrusion

No Extrusion

* Reduce the clearance shown by 60% when using silicone or fluorosilicone elastomers.

Basis for Curves1. 100,000 pressure cycles at the rate of 60 per minute from zero to the indicated pressure.2. Maximum temperature (i.e., test temperature) 71°C (160°F).3. No back-up rings.4. Total diametral clearance must include cylinder expansion due to pressure.5. Apply a reasonable safety factor in practical applications to allow for excessively sharp

edges and other imperfections and for higher temperatures.

Extrusion



ENGINEERING

TOO

LS

36


EngineeringDesignNotes



GLAND DESIG

NS

37


GlandDesigns

The following charts are included to facilitate engineering analysis.Additional information is available in the Parker Handbook (ORD 5700)

or online at www.parkerorings.com

Parker offers o-rings for use in static as well as dynamic sealing applications.Static seals are those where the mating parts of the gland do not havemovement relative to each other. These seals include face, radial, dovetail.Examples of these seals and the corresponding design charts are found onpages 38-43. Dynamic seals include reciprocating, floating pneumatic,oscillating, and rotary applications. Dynamic seals are defined by one of thegland parts having movement relative to the other part. Gland designrecommendations for a reciprocating seal are provided on pages 44 and 45.

For further design assistance and recommendations, access our TotalinPHorm Seal Design software, or contact a Parker O-Ring ApplicationsEngineer.



38


For Internal Pressure(outward pressure direction)dimension the groove by itsoutside diameter (H ) and width:O

(H ) = Mean O.D. of O-ringO

O.D., but not more than-.060

Tolerance = Minus 1% of Mean

For External Pressure(inward pressure direction)dimension the groove by itsinside diameter (H) and width:i

(H) = Mean I.D. of O-ringi

I.D., but not more than+.060

Tolerance = Plus 1% of Mean

L

0˚ to 5˚(Typ.)

*

63

63

R

XSurface finish X:32 for liquids16 for vacuumand gases

G

LGrooveDepth(= Gland Depth)

Gland DetailFinishes are RMS values

(R f D i Ch A4 2 b l )

Break CornersApprox. .005 RAD.

X

W

W

I.D.

O-Ring Face Seal Glands

W

W W

I.D.

.005Max.

.003 Max.

Section W-W

* Mean OD = ID + (2X Cross Section)



39


O-Ring W L G RSize Cross Section Squeeze Groove Width

ParkerNo. 2-Size Gland Vacuum GrooveAS568B Nominal Actual Depth Actual % Liquids and Gases Radius

004 .070 .050 .013 19 .101 .084 .005through 1/16 ±.003 to to to to to to

050 .054 .023 32 .107 .089 .015


178 .080 .032 30 .142 .125 .015


284 .107 .042 30 .187 .164 .025


395 .162 .063 30 .290 .244 .035


475 .211 .080 29 .362 .314 .035

.375 .276 .082 22 .475 .419 .030Special 3/8 ±.007 to to to to to to

.286 .108 28 .485 .424 .045

.500 .370 .112 22 .638 .560 .030Special 1/2 ±.008 to to to to to to

.380 .138 27 .645 .565 .045

O-Ring Face Seal GlandsThese dimensions are intended primarily for face type o-ring seals and lowtemperature applications.



GLAND DESIG

NS

40


1/2

E

Mal

e G

land

Fem

ale

Gla

nd 1/2

E

Fin

ishe

s ar

e R

MS

val

ues.

(e)

0˚ to

5˚

(Typ

.)

63

63

R

32 G

1/2

E

FL

Gla

nd D

etai

l

Bre

ak C

orne

rsA

ppro

x..0

05 R

AD

.

32

WW

W

W

I.D.

.005

Typ.

.003

Typ.

Sec

tion

W-W

Pre

ssur

eP

ress

ure

Pre

ssur

e

GG

2G

1

No

Par

bak

Rin

g

One

Par

bak

Rin

g

Two

Par

bak

Rin

gs

Gla

ndD

epth

F G

roov

eD

epth

(R

ef.)

Indu

stri

al O

-Rin

g S

tatic

Sea

l Gla

nds



41


004

.070

.050

.015

22.0

02.0

93.1

38.2

05.0

05th

roug

h1/

16±.

003

toto

toto

toto

toto

.002

050

.052

.023

32.0

05.0

98.1

43.2

10.0

15

102

.103

.081

.017

17.0

02.1

40.1

71.2

38.0

05th

roug

h3/

32±.

003

toto

toto

toto

toto

.002

178

.083

.025

24.0

05.1

45.1

76.2

43.0

15

201

.139

.111

.022

16.0

03.1

87.2

08.2

75.0

10th

roug

h1/

8±.

004

toto

toto

toto

toto

.003

284

.113

.032

23.0

06.1

92.2

13.2

80.0

25

309

.210

.170

.032

15.0

03.2

81.3

11.4

10.0

20th

roug

h3/

16±.

005

toto

toto

toto

toto

.004

395

.173

.045

21.0

06.2

86.3

16.4

15.0

35

425

.275

.226

.040

15.0

04.3

75.4

08.5

38.0

20th

roug

h1/

4±.

006

toto

toto

toto

toto

.005

475

.229

.055

20.0

07.3

80.4

13.5

43.0

35

Indu

stri

al O

-Rin

g S

tatic

Sea

l Gla

nds

O-R

ing

WL

E (a

)G

- G

roov

e W

idth

RM

ax.

2-S

ize

Cro

ss-S

ectio

nG

land

Squ

eeze

Dia

met

ral

No

Par

bak

1 P

arba

k2

Par

bak

Gro

ove

Ecc

en-

AS

568B

-N

omin

.A

ctua

lD

epth

Act

ual

%C

lear

ance

Rin

g (G

)R

ing

(G1)

Rin

gs (G

2)R

adiu

str

icity

(b)

(a)

Cle

aran

ce (

extru

sion

gap

) m

ust b

e he

ld to

a m

inim

um c

onsi

sten

t with

des

ign

requ

irem

ents

for

tem

pera

ture

rang

e va

riatio

n.

(b)

Tota

l ind

icat

or r

eadi

ng b

etw

een

groo

ve a

nd a

djac

ent b

earin

g su

rface

.

(c)

Red

uce

max

imum

dia

met

ral c

lear

ance

50%

whe

n us

ing

silic

one

or fl

uoro

silic

one

o-rin

gs.

(d)

For

ease

of a

ssem

bly,

whe

n P

arba

ks a

re u

sed,

gla

nd d

epth

may

be

incr

ease

d up

to 5

%.



GLAND DESIG

NS

42


It is often necessary to provide some mechanical means for holding an o-ring in aface seal groove during assembly and maintenance of equipment. An undercut ordovetail groove has proven beneficial in many applications to keep the o-ring inplace. This is an expensive groove to machine, however, and thus should be usedonly when absolutely necessary.

It should be noted that although this method has been used successfully, it is notgenerally recommended. The inherent characteristics of the groove design limit theamount of void area. Normally acceptable tolerance extremes, wide servicetemperature ranges and fluid media that cause high swell of the elastomer areconditions that cannot be tolerated in this type of groove design.

66˚

Mean GrooveDiameter CoincidesWith MeanO-ring Diameter. Finishes are RMS

(to sharpcorner)

values

L

G

R

R1

O-Ring Dovetail Grooves

NOTE: Parker offers dovetail cutters for various sizes. For more information, contact aParker O-Ring Applications Engineer.



43


NOTE: These design recommendations assume metal-to-metal contact. In specialapplications, (in the semiconductor industry, for example) deviation from theserecommendations may be necessary. When designing with Parofluor™ elastomers, oneshould take into consideration that perfluorinated elastomers may require more squeezethan an FKM material to obtain optimum sealing performance. To increase squeeze,modifications of the design recommendations shown above are necessary.

W GO-Ring Cross Section L Gland Width

Size Gland Squeeze (To sharp AS568B- Nominal Actual Depth % corner) R R1

004 .070 .050 .055through 1/16 ±.003 to 27 to .005 1/64

050 .052 .059

102 .103 .081 .083through 3/32 ±.003 to 21 to .010 1/64

178 .083 .087

201 .139 .111 .113through 1/8 ±.004 to 20 to .010 1/32

284 .113 .117

309 .210 .171 .171through 3/16 ±.005 to 18 to .015 1/32

395 .173 .175

425 .275 .231 .231through 1/4 ±.006 to 16 to .015 1/16

475 .234 .235

.375 .315 .315Special 3/8 ±.007 to 16 to .020 3/32

.319 .319

O-Ring Dovetail GroovesRadius “R” is CRITICAL. Insufficient radius will potentially cause damage tothe o-ring during installation, while excessive radius may contribute to extrusion.



GLAND DESIG

NS

44


Pis

ton

Gla

ndR

od G

land

Gla

nd D

etai

l

1/2E

FL

GR16

X

32

X

0˚ to

5˚

(Typ

.)B

reak

Cor

ners

App

rox.

.005

Rad

. Gla

ndD

epth

F G

roov

eD

epth

(R

ef.)

Sur

face

Fin

ish

X:

32W

ithou

t Par

bak

Rin

g63

With

Par

bak

Rin

g

No

Par

bak

Rin

g

One

Par

bak

Rin

g

Pre

ssur

e.0

05Ty

p.

W

WW W

I.D.

.003

Typ.

Sec

tion

W-W

Pre

ssur

eP

ress

ure

Two

Par

bak

Rin

gs

G2

GG

1

Fin

ishe

s ar

e R

MS

val

ues

Indu

stri

al R

ecip

roca

ting

O-R

ing

Pac

king

Gla

nds



45


Indu

stri

al R

ecip

roca

ting

O-R

ing

Pac

king

Gla

nds

006

.070

.055

.010

15.0

02.0

93.1

38.2

05.0

05th

roug

h1/

16±.

003

toto

toto

toto

toto

.002

012

.057

.018

25.0

05.0

98.1

43.2

10.0

15

104

.103

.088

.010

10.0

02.1

40.1

71.2

38.0

05th

roug

h3/

32±.

003

toto

toto

toto

toto

.002

116

.090

.018

17.0

05.1

45.1

76.2

43.0

15

201

.139

.121

.012

9.0

03.1

87.2

08.2

75.0

10th

roug

h1/

8±.

004

toto

toto

toto

toto

.003

222

.123

.022

16.0

06.1

92.2

13.2

80.0

25

309

.210

.185

.017

8.0

03.2

81.3

11.4

10.0

20th

roug

h3/

16±.

005

toto

toto

toto

toto

.004

349

.188

.030

14.0

06.2

86.3

16.4

15.0

35

425

.275

.237

.029

11.0

04.3

75.4

08.5

38.0

20th

roug

h1/

4±.

006

toto

toto

toto

toto

.005

460

.240

.044

16.0

07.3

80.4

13.5

43.0

35

(a)

Cle

aran

ce (

extru

sion

gap

) m

ust b

e he

ld to

a m

inim

um c

onsi

sten

t with

des

ign

requ

irem

ents

for

tem

pera

ture

rang

e va

riatio

n.

(b)

Tota

l ind

icat

or r

eadi

ng b

etw

een

groo

ve a

nd a

djac

ent b

earin

g su

rface

.

(c)

O-r

ings

not

list

ed a

re n

ot r

ecom

men

ded

for

reci

proc

atin

g ap

plic

atio

ns.

O-R

ing

WL

E (a

)G

- G

roov

e W

idth

RM

ax.

2-S

ize

Cro

ss-S

ectio

nG

land

Squ

eeze

Dia

met

ral

No

Par

bak

1 P

arba

k2

Par

bak

Gro

ove

Ecc

en-

AS

568B

-N

omin

.A

ctua

lD

epth

Act

ual

%C

lear

ance

Rin

g (G

)R

ing

(G1)

Rin

gs (G

2)R

adiu

str

icity

(b)



GLAND DESIG

NS

46


GlandDesignNotes



SIZING CHARTS

47


The following charts provide dimensions for standard shrinkage materials only.These correspond to AS568B dimensions. O-rings manufactured fromcompounds with different shrinkage rates will provide slightly differentdimensions and tolerances when standard tooling is used. Custom toolingmay be necessary for some compounds in order to meet AS568B dimensionsand tolerances. For further information contact a Parker O-Ring ApplicationsEngineer.

SizingCharts



48


2-001* .029 .004 0,74 0,102-002* .042 .004 1,07 0,102-003* .056 .004 1,42 0,102-004 .070 .005 1,78 0,132-005 .101 .005 2,57 0,132-006 .114 .005 2,90 0,132-007 .145 .005 3,68 0,132-008 .176 .005 4,47 0,132-009 .208 .005 5,28 0,132-010 .239 .005 6,07 0,132-011 .301 .005 7,65 0,132-012 .364 .005 9,25 0,132-013 .426 .005 10,82 0,132-014 .489 .005 12,42 0,132-015 .551 .007 14,00 0,182-016 .614 .009 15,60 0,232-017 .676 .009 17,17 0,232-018 .739 .009 18,77 0,232-019 .801 .009 20,35 0,232-020 .864 .009 21,95 0,232-021 .926 .009 23,52 0,232-022 .989 .010 25,12 0,252-023 1.051 .010 26,70 0,252-024 1.114 .010 28,30 0,252-025 1.176 .011 29,87 0,28

2-0XX Sizes: cross-section width = .070 ± .003 in (1,78 ± 0,08 mm)Inside Tol. Inside Tol. Inside Tol. Inside Tol.

Parker dia. ± dia. ± Parker dia. ± dia. ±No. in. in. mm mm No. in. in. mm mm

2-026 1.239 .011 31,47 0,282-027 1.301 .011 33,05 0,282-028 1.364 .013 34,65 0,332-029 1.489 .013 37,82 0,332-030 1.614 .013 41,00 0,332-031 1.739 .015 44,17 0,382-032 1.864 .015 47,35 0,382-033 1.989 .018 50,52 0,462-034 2.114 .018 53,70 0,462-035 2.239 .018 56,87 0,462-036 2.364 .018 60,05 0,462-037 2.489 .018 63,22 0,462-038 2.614 .020 66,40 0,512-039 2.739 .020 69,57 0,512-040 2.864 .020 72,75 0,512-041 2.989 .024 75,92 0,612-042 3.239 .024 82,27 0,612-043 3.489 .024 88,62 0,612-044 3.739 .027 94,97 0,692-045 3.989 .027 101,32 0,692-046 4.239 .030 107,67 0,762-047 4.489 .030 114,02 0,762-048 4.739 .030 120,37 0,762-049 4.989 .037 126,72 0,942-050 5.239 .037 133,07 0,94

* Please note: for 2-001 cross-section width = .040 in (1,02 mm)for 2-002 cross-section width = .050 in (1,27 mm)for 2-003 cross-section width = .060 in (1,52 mm)

(a) The rubber compound must be added when ordering by the 2-size number (i.e., N0674 2-007).

(b) This chart provides dimensions for standard (AN) shrinkage materials ONLY.These correspond to AS568B dimensions. O-rings manufactured out of compounds with different shrinkage rates (other than AN) will produce slightly different dimensions and tolerances. For more information on shrinkage rates, see Parker O-Ring Handbook (ORD 5700).



49


2-102 .049 .005 1,24 0,132-103 .081 .005 2,06 0,132-104 .112 .005 2,84 0,132-105 .143 .005 3,63 0,132-106 .174 .005 4,42 0,132-107 .206 .005 5,23 0,132-108 .237 .005 6,02 0,132-109 .299 .005 7,59 0,132-110 .362 .005 9,19 0,132-111 .424 .005 10,77 0,132-112 .487 .005 12,37 0,132-113 .549 .007 13,94 0,182-114 .612 .009 15,54 0,232-115 .674 .009 17,12 0,232-116 .737 .009 18,72 0,232-117 .799 .010 20,30 0,252-118 .862 .010 21,89 0,252-119 .924 .010 23,47 0,252-120 .987 .010 25,07 0,252-121 1.049 .010 26,64 0,252-122 1.112 .010 28,24 0,252-123 1.174 .012 29,82 0,302-124 1.237 .012 31,42 0,302-125 1.299 .012 32,99 0,302-126 1.362 .012 34,59 0,302-127 1.424 .012 36,17 0,302-128 1.487 .012 37,77 0,302-129 1.549 .015 39,34 0,382-130 1.612 .015 40,94 0,382-131 1.674 .015 42,52 0,382-132 1,737 .015 44,12 0,382-133 1,799 .015 45,69 0,382-134 1.862 .015 47,29 0,382-135 1.925 .017 48,90 0,432-136 1.987 .017 50,47 0,432-137 2.050 .017 52,07 0,432-138 2.112 .017 53,64 0,432-139 2.175 .017 55,25 0,432-140 2.237 .017 56,82 0,43



2-141 2.300 .020 58,42 0,512-142 2.362 .020 59,99 0,512-143 2.425 .020 61,60 0,512-144 2.487 .020 63,17 0,512-145 2.550 .020 64,77 0,512-146 2.612 .020 66,34 0,512-147 2.675 .022 67,95 0,562-148 2.737 .022 69,52 0,562-149 2.800 .022 71,12 0,562-150 2.862 .022 72,69 0,562-151 2.987 .024 75,87 0,612-152 3.237 .024 82,22 0,612-153 3.487 .024 88,57 0,612-154 3.737 .028 94,92 0,712-155 3.987 .028 101,27 0,712-156 4.237 .030 107,62 0,762-157 4.487 .030 113,97 0,762-158 4.737 .030 120,32 0,762-159 4.987 .035 126,67 0,892-160 5.237 .035 133,02 0,892-161 5.487 .035 139,37 0,892-162 5.737 .035 145,72 0,892-163 5.987 .035 152,07 0,892-164 6.237 .040 158,42 1,022-165 6.487 .040 164,77 1,022-166 6.737 .040 171,12 1,022-167 6.987 .040 177,47 1,022-168 7.237 .045 183,82 1,142-169 7.487 .045 190,17 1,142-170 7.737 .045 196,52 1,142-171 7.987 .045 202,87 1,142-172 8.237 .050 209,22 1,272-173 8.487 .050 215,57 1,272-174 8.737 .050 221,92 1,272-175 8.987 .050 228,27 1,272-176 9.237 .055 234,62 1,402-177 9.487 .055 240,97 1,402-178 9.737 .055 247,32 1,40



SIZING CHARTS

50


2-201 .171 .055 4,34 0,132-202 .234 .005 5,94 0,132-203 .296 .005 7,52 0,132-204 .359 .005 9,12 0,132-205 .421 .005 10,69 0,132-206 .484 .005 12,29 0,132-207 .546 .007 13,87 0,182-208 .609 .009 15,47 0,232-209 .671 .010 17,04 0,232-210 .734 .010 18,64 0,252-211 .796 .010 20,22 0,252-212 .859 .010 21,82 0,252-213 .921 .010 23,39 0,252-214 .984 .010 24,99 0,252-215 1.046 .010 26,5 0,252-216 1.109 .012 28,17 0,302-217 1.171 .012 29,74 0,302-218 1.234 .012 31,34 0,302-219 1.296 .012 32,92 0,302-220 1.359 .012 34,52 0,302-221 1.421 .012 36,09 0,302-222 1.484 .015 37,69 0,382-223 1.609 .015 40,87 0,382-224 1.734 .015 44,04 0,382-225 1.859 .018 47,22 0,462-226 1.984 .018 50,39 0,462-227 2.109 .018 53,57 0,462-228 2.234 .020 56,74 0,512-229 2.359 .020 59,92 0,512-230 2.484 .020 63,09 0,512-231 2.609 .020 66,27 0,512-232 2.734 .024 69,44 0,62-233 2.859 .024 72,62 0,612-234 2.984 .024 75,79 0,612-235 3.109 .024 78,97 0,61



2-236 3.234 .024 82,14 0,612-237 3.359 .024 85,32 0,612-238 3.484 .024 88,49 0,612-239 3.609 .028 91,67 0,712-240 3.734 .028 94,84 0,712-241 3.859 .028 98,02 0,712-242 3.984 .028 101,19 0,712-243 4.109 .028 104,37 0,712-244 4.234 .030 107,54 0,762-245 4.359 .030 110,72 0,762-246 4.484 .030 113,89 0,762-247 4.609 .030 117,07 0,762-248 4.734 .030 120,24 0,762-249 4.859 .035 23,42 0,892-250 4.984 .035 126,59 0,892-251 5.109 .035 129,77 0,892-252 5.234 .035 132,94 0,892-253 5.359 .035 136,12 0,892-254 5.484 .035 139,29 0,892-255 5.609 .035 142,47 0,892-256 5.734 .035 145,64 0,892-257 5.859 .035 148,82 0,892-258 5.984 .035 151,99 0,892-259 6.234 .040 158,34 1,022-260 6.484 .040 164,69 1,022-261 6.734 .040 171,04 1,022-262 6.984 .040 177,39 1,022-263 7.234 .045 183,74 1,142-264 7.484 .045 190,09 1,142-265 7.734 .045 196,44 1,142-266 7.984 .045 202,79 1,142-267 8.234 .050 209,14 1,272-268 8.484 .050 215,49 1,272-269 8.734 .050 221,84 1,272-270 8.984 .050 228,19 1,27



51


2-271 9.234 .055 234,54 1,402-272 9.484 .055 240,89 1,402-273 9.734 .055 247,24 1,402-274 9.984 .055 253,59 1,402-275 10.484 .055 266,29 1,402-276 10.984 .065 278,99 1,652-277 11.484 .065 291,69 1,65



2-278 11.984 .065 304,39 1,652-279 12.984 .065 329,79 1,652-280 13.984 .065 355,19 1,652-281 14.984 .065 380,59 1,652-282 15.955 .075 405,26 1,912-283 16.955 .080 430,66 2,032-284 17.955 .085 456,06 2,16



SIZING CHARTS

52


2-309 .412 .005 10,46 0,132-310 .475 .005 12,07 0,132-311 .537 .007 13,64 0,182-312 .600 .009 15,24 0,232-313 .662 .009 16,81 0,232-314 .725 .010 18,42 0,252-315 .787 .010 19,99 0,252-316 .850 .010 21,59 0,252-317 .912 .010 23,16 0,252-318 .975 .010 24,77 0,252-319 1.037 .010 26,34 0,252-320 1.100 .012 27,94 0,302-321 1.162 .012 29,51 0,302-322 1.225 .012 31,12 0,32-323 1.287 .012 32,69 0,302-324 1.350 .012 34,29 0,302-325 1.475 .015 37,47 0,382-326 1.600 .015 40,64 0,382-327 1.725 .015 43,82 0,382-328 1.850 .015 46,99 0,382-329 1.975 .018 50,17 0,462-330 2.100 .018 53,34 0,462-331 2.225 .018 56,52 0,462-332 2.350 .018 59,69 0,462-333 2.475 .020 62,87 0,512-334 2.600 .020 66,04 0,512-335 2.725 .020 69,22 0,512-336 2.850 .020 72,39 0,512-337 2.975 .024 75,57 0,612-338 3.100 .024 78,74 0,612-339 3.225 .024 81,92 0,62-340 3.350 .024 85,09 0,612-341 3.475 .024 88,27 0,612-342 3.600 .028 91,44 0,712-343 3.725 .028 94,62 0,71

2-3XX Sizes: cross-section width = .210 ± .005 in (5,33 ± 0,13 mm) Inside Tol. Inside Tol. Inside Tol. Inside Tol.


2-344 3.850 .028 97,79 0,712-345 3.975 .028 100,97 0,712-346 4.100 .028 104,14 0,712-347 4.225 .030 107,32 0,762-348 4.350 .030 110,49 0,762-349 4.475 .030 113,67 0,762-350 4.600 .030 116,84 0,762-351 4.725 .030 120,02 0,762-352 4.850 .030 123,19 0,762-353 4.975 .037 126,37 0,942-354 5.100 .037 129,54 0,942-355 5.225 .037 132,72 0,942-356 5.350 .037 135,89 0,942-357 5.475 .037 139,07 0,942-358 5.600 .037 142,24 0,942-359 5.725 .037 145,42 0,942-360 5.850 .037 148,59 0,942-361 5.975 .037 151,77 0,942-362 6.225 .040 158,12 1,022-363 6.475 .040 164,47 1,022-364 6.725 .040 170,82 1,022-365 6.975 .040 177,17 1,022-366 7.225 .045 183,52 1,142-367 7.475 .045 189,87 1,142-368 7.725 .045 196,22 1,142-369 7.975 .045 202,57 1,142-370 8.225 .050 208,92 1,272-371 8.475 .050 215,27 1,272-372 8.725 .050 221,62 1,272-373 8.975 .050 227,97 1,272-374 9.225 .055 234,32 1,402-375 9.475 .055 240,67 1,402-376 9.725 .055 247,02 1,402-377 9.975 .055 253,37 1,402-378 10.475 .060 266,07 1,52



53


2-379 10.975 .060 278,77 1,522-380 11.475 .065 291,47 1,652-381 11.975 .065 304,17 1,652-382 12.975 .065 329,57 1,652-383 13.975 .070 354,97 1,782-384 14.975 .070 380,37 1,782-385 15.955 .075 405,26 1,912-386 16.955 .080 430,66 2,032-387 17.955 .085 456,06 2,16

2-3XX Sizes: cross-section width = .210 ± .005 in (5,33 ± 0,13 mm) Inside Tol. Inside Tol. Inside Tol. Inside Tol.


2-388 18.955 .090 481,41 2,292-389 19.955 .095 506,81 2,412-390 20.955 .095 532,21 2,412-391 21.955 .100 557,61 2,542-392 22.940 .105 582,68 2,672-393 23.940 .110 608,08 2,792-394 24.940 .115 633,48 2,922-395 25.940 .120 658,88 3,05



SIZING CHARTS

54


2-425 4.475 .033 113,67 0,842-426 4.600 .033 116,84 0,842-427 4.725 .033 120,02 0,842-428 4.850 .033 123,19 0,842-429 4.975 .037 126,37 0,942-430 5.100 .037 129,54 0,942-431 5.225 .037 132,72 0,942-432 5.350 .037 135,89 0,942-433 5.475 .037 139,07 0,942-434 5.600 .037 142,24 0,942-435 5.725 .037 145,42 0,942-436 5.850 .037 148,59 0,942-437 5.975 .037 151,77 0,942-438 6.225 .040 158,12 1,022-439 6.475 .040 164,47 1,022-440 6.725 .040 170,82 1,022-441 6.975 .040 177,17 1,022-442 7.225 .045 183,52 1,142-443 7.475 .045 189,87 1,142-444 7.725 .045 196,22 1,142-445 7.975 .045 202,57 1,142-446 8.475 .055 215,27 1,402-447 8.975 .055 227,97 1,402-448 9.475 .055 240,67 1,402-449 9.975 .055 253,37 1,402-450 10.475 .060 266,07 1,52



2-451 10.975 .060 278,77 1,522-452 11.475 .060 291,47 1,522-453 11.975 .060 304,17 1,522-454 12.475 .060 316,87 1,522-455 12.975 .060 329,57 1,522-456 13.475 .070 342,27 1,782-457 13.975 .070 354,97 1,782-458 14.475 .070 367,67 1,782-459 14.975 .070 380,37 1,782-460 15.475 .070 393,07 1,782-461 15.955 .075 405,26 1,912-462 16.455 .075 417,96 1,912-463 16.955 .080 430,66 2,032-464 17.455 .085 443,36 2,162-465 17.955 .085 456,06 2,162-466 18.455 .085 468,76 2,162-467 18.955 .090 481,46 2,292-468 19.455 .090 494,16 2,292-469 19.955 .095 506,86 2,412-470 20.955 .095 532,26 2,412-471 21.955 .100 557,66 2,542-472 22.940 .105 582,68 2,672-473 23.940 .110 608,08 2,792-474 24.940 .115 633,48 2,922-475 25.940 .120 658,88 3,05



55


3-9XX Sizes

Tol. Tol. Tol. Tol.Parker ID ± Width ± ID ± Width ±

No. In. In. In. In. mm mm mm mm

(a) The rubber compound must be added when ordering by the 3-size number (i.e., N0552 3-910). (b) Material with unusual shrinkage during molding will give slightly different dimensions.

3-901 .185 .005 .056 .003 4,70 0,13 1,42 0,083-902 .239 .005 .064 .003 6,07 0,13 1,63 0,083-903 .301 .005 .064 .003 7,65 0,13 1,63 0,083-904 .351 .005 .072 .003 8,92 0,13 1,83 0,083-905 .414 .005 .072 .003 10,52 0,13 1,83 0,083-906 .468 .005 .078 .003 11,89 0,13 1,98 0,083-907 .530 .007 .082 .003 13,46 0,18 2,08 0,083-908 .644 .009 .087 .003 16,36 0,23 2,21 0,083-909 .706 .009 .097 .003 17,93 0,23 2,46 0,083-910 .755 .009 .097 .003 19,18 0,23 2,46 0,083-911 .863 .009 .116 .004 21,92 0,23 2,95 0,103-912 .924 .009 .116 .004 23,47 0,23 2,95 0,103-913 .986 .010 .116 .004 25,04 0,26 2,95 0,103-914 1.047 .010 .116 .004 26,59 0,26 2,95 0,103-916 1.171 .010 .116 .004 29,74 0,26 2,95 0,103-918 1.355 .012 .116 .004 34,42 0,30 2,95 0,103-920 1.475 .014 .118 .004 37,47 0,36 3,00 0,103-924 1.720 .014 .118 .004 43,69 0,36 3,00 1,103-928 2.090 .018 .118 .004 53,09 0,46 3,00 0,103-932 2.337 .018 .118 .004 59,36 0,46 3,00 0,10

The following charts provide dimensions for standard shrinkage materials only.These correspond to AS568B dimensions. O-rings manufactured fromcompounds with different shrinkage rates will provide slightly differentdimensions and tolerances when standard tooling is used. Custom tooling maybe necessary for some compounds in order to meet AS568B dimensions andtolerances. Contact a Parker O-Ring Applications Engineer with any questions.

Tol. Tol.Port O-Ring Parker ID ± W ±Thread Name Part No. mm mm mm mm

M8x1 M8 ISO O-Ring 0024-0063 6,10 0,13 1,60 0,08M10x1 M10 ISO O-Ring 0031-9063 8,10 0,13 1,60 0,08M12x1.5 M12 ISO O-Ring 0036-6087 9,30 0,13 2,20 0,08M14x1.5 M14 ISO O-Ring 0044-5087 11,30 0,13 2,20 0,08M16x1.5 M16 ISO O-Ring 0052-4087 13,30 0,15 2,20 0,08M18x1.5 M18 ISO O-Ring 0060-2087 15,30 0,18 2,20 0,08M22x1.5 M22 ISO O-Ring 0076-0087 19,30 0,20 2,20 0,08M27x2 M27 ISO O-Ring 0092-9114 23,60 0,23 2,90 0,10M33x2 M33 ISO O-Ring 0116-5114 29,60 0,30 2,90 0,10M42x2 M42 ISO O-Ring 0152-0114 38,60 0,36 2,90 0,10M48x2 M48 ISO O-Ring 0175-6114 44,60 0,41 2,90 0,10M60x2 M60 ISO O-Ring 0222-8114 56,60 0,46 2,90 0,10

O-Rings for Metric Tube Fittings (ISO 6149) (Similar to SAE J2244)Parker O-Ring Division is tooled in these sizes for Nitrile and Fluorocarbon rubber only.Contact the division for availability.



SIZING CHARTS

5-XXX Sizes



56


5-118 0.059 0.004 0.040 0.003 1.50 0.10 1.02 0.08

5-187 0.070 0.005 0.036 0.003 1.78 0.13 0.91 0.08

5-051 0.070 0.005 0.040 0.003 1.78 0.13 1.02 0.08

5-101 0.100 0.005 0.038 0.003 2.54 0.13 0.97 0.08

5-578 0.102 0.005 0.074 0.003 2.59 0.13 1.88 0.08

5-632 0.110 0.005 0.040 0.003 2.79 0.13 1.02 0.08

5-102 0.116 0.005 0.038 0.003 2.95 0.13 0.97 0.08

5-178 0.120 0.005 0.040 0.003 3.05 0.13 1.02 0.08

5-683 0.122 0.005 0.063 0.003 3.10 0.13 1.60 0.08

5-646 0.126 0.005 0.040 0.003 3.20 0.13 1.02 0.08

5-103 0.128 0.005 0.050 0.003 3.25 0.13 1.27 0.08

5-190 0.132 0.005 0.070 0.003 3.35 0.13 1.78 0.08

5-579 0.133 0.005 0.074 0.003 3.39 0.13 1.88 0.08

5-669 0.146 0.005 0.040 0.003 3.71 0.13 1.02 0.08

5-148 0.154 0.005 0.038 0.003 3.91 0.13 0.97 0.08

5-105 0.154 0.005 0.050 0.003 3.91 0.13 1.27 0.08

5-106 0.154 0.005 0.066 0.003 3.91 0.13 1.68 0.08

5-580 0.165 0.005 0.074 0.003 4.19 0.13 1.88 0.08

5-193 0.176 0.005 0.040 0.003 4.47 0.13 1.02 0.08

5-108 0.176 0.005 0.050 0.003 4.47 0.13 1.27 0.08

5-124 0.176 0.005 0.056 0.003 4.47 0.13 1.42 0.08

5-107 0.176 0.005 0.066 0.003 4.47 0.13 1.68 0.08

5-125 0.180 0.005 0.040 0.003 4.57 0.13 1.02 0.08

5-581 0.192 0.005 0.074 0.003 4.88 0.13 1.88 0.08

5-685 0.208 0.005 0.094 0.003 5.28 0.13 2.39 0.08

5-582 0.224 0.005 0.074 0.003 5.69 0.13 1.88 0.08

Parker Series 5-XXX O-Ring SizesThe following 5-XXX sizes are o-rings of non-standard dimensions forwhich Parker tooling was available as ofApril 1, 2004. This tooling will be maintainedwhile volume demand continues. A moldscrapped as defective will not be replacedunless demand justifies the expense.Please note 5-XXX tooling does not exist forParofluor Family compounds.

Note: These molds are cut to allow forstandard “AN” shrinkage and in materialshaving standard shrinkage they willnormally produce rings to the dimensionslisted. Materials with other than standardshrinkage will give different dimensions andtolerances. Please consult the factory oryour local Parker Distributor for theavailability of special sizes not included inthis list.



5-XXX Sizes



57


5-194 0.228 0.005 0.040 0.003 5.79 0.13 1.02 0.08

5-638 0.233 0.005 0.076 0.003 5.92 0.13 1.93 0.08

5-179 0.239 0.005 0.040 0.003 6.07 0.13 1.02 0.08

5-151 0.239 0.005 0.051 0.003 6.07 0.13 1.30 0.08

5-127 0.239 0.005 0.074 0.003 6.07 0.13 1.88 0.08

5-1002 0.239 0.005 0.174 0.005 6.07 0.13 4.42 0.13

5-197 0.242 0.005 0.040 0.003 6.15 0.13 1.02 0.08

5-180 0.248 0.005 0.048 0.003 6.30 0.13 1.22 0.08

5-686 0.248 0.005 0.094 0.003 6.30 0.13 2.39 0.08

5-583 0.251 0.005 0.074 0.003 6.38 0.13 1.88 0.08

5-052 0.270 0.005 0.070 0.003 6.86 0.13 1.78 0.08

5-202 0.278 0.005 0.046 0.003 7.06 0.13 1.17 0.08

5-698 0.283 0.005 0.040 0.003 7.19 0.13 1.02 0.08

5-584 0.283 0.005 0.074 0.003 7.19 0.13 1.88 0.08

5-687 0.287 0.005 0.094 0.003 7.29 0.13 2.39 0.08

5-1004 0.290 0.005 0.045 0.003 7.39 0.13 1.14 0.08

5-056 0.301 0.005 0.038 0.003 7.65 0.13 0.97 0.08

5-710 0.301 0.005 0.054 0.003 7.65 0.13 1.37 0.08

5-673 0.305 0.005 0.074 0.003 7.75 0.13 1.88 0.08

5-204 0.312 0.005 0.036 0.003 7.92 0.13 0.91 0.08

5-205 0.312 0.005 0.092 0.003 7.92 0.13 2.34 0.08

5-160 0.312 0.005 0.103 0.003 7.92 0.13 2.62 0.08

5-712 0.313 0.005 0.051 0.003 7.95 0.13 1.30 0.08

5-585 0.314 0.005 0.074 0.003 7.98 0.13 1.88 0.08

5-664 0.320 0.005 0.070 0.003 8.13 0.13 1.78 0.08

5-1006 0.322 0.005 0.070 0.003 8.18 0.13 1.78 0.08

5-206 0.326 0.005 0.103 0.003 8.28 0.13 2.62 0.08

5-1007 0.330 0.005 0.050 0.003 8.38 0.13 1.27 0.08

5-133 0.332 0.005 0.031 0.003 8.43 0.13 0.79 0.08

5-612 0.344 0.005 0.070 0.003 8.74 0.13 1.78 0.08

5-586 0.350 0.005 0.074 0.003 8.89 0.13 1.88 0.08

5-587 0.350 0.005 0.106 0.004 8.89 0.13 2.69 0.10

5-018 0.352 0.005 0.113 0.004 8.94 0.13 2.87 0.10

5-699 0.353 0.005 0.094 0.003 8.97 0.13 2.39 0.08



SIZING CHARTS

5-XXX Sizes



58


5-700 0.354 0.005 0.118 0.004 8.99 0.13 3.00 0.10

5-716 0.362 0.005 0.118 0.004 9.19 0.13 3.00 0.10

5-057 0.364 0.005 0.045 0.003 9.25 0.13 1.14 0.08

5-209 0.370 0.005 0.040 0.003 9.40 0.13 1.02 0.08

5-211 0.375 0.005 0.187 0.005 9.53 0.13 4.75 0.13

5-212 0.384 0.005 0.070 0.003 9.75 0.13 1.78 0.08

5-614 0.391 0.005 0.103 0.003 9.93 0.13 2.62 0.08

5-718 0.395 0.005 0.040 0.003 10.03 0.13 1.02 0.08

5-134 0.410 0.005 0.031 0.003 10.41 0.13 0.79 0.08

5-588 0.413 0.005 0.106 0.004 10.49 0.13 2.69 0.10

5-002 0.416 0.005 0.059 0.003 10.57 0.13 1.50 0.08

5-215 0.418 0.005 0.094 0.003 10.62 0.13 2.39 0.08

5-218 0.425 0.005 0.025 0.003 10.80 0.13 0.64 0.08

5-682 0.426 0.005 0.040 0.003 10.82 0.13 1.02 0.08

5-058 0.426 0.005 0.050 0.003 10.82 0.13 1.27 0.08

5-613 0.437 0.005 0.070 0.003 11.10 0.13 1.78 0.08

5-1011 0.447 0.005 0.103 0.003 11.35 0.13 2.62 0.08

5-222 0.455 0.005 0.128 0.004 11.56 0.13 3.25 0.10

5-223 0.458 0.005 0.053 0.003 11.63 0.13 1.35 0.08

5-225 0.469 0.006 0.094 0.003 11.91 0.15 2.39 0.08

5-615 0.469 0.006 0.103 0.003 11.91 0.15 2.62 0.15

5-725 0.470 0.006 0.270 0.006 11.94 0.15 6.86 0.15

5-652 0.473 0.006 0.071 0.003 12.01 0.15 1.80 0.08

5-726 0.484 0.006 0.056 0.003 12.29 0.15 1.42 0.08

5-566 0.489 0.006 0.055 0.003 12.42 0.15 1.40 0.08

5-230 0.500 0.006 0.125 0.004 12.70 0.15 3.18 0.10

5-231 0.501 0.006 0.062 0.003 12.73 0.15 1.57 0.08

5-675 0.508 0.006 0.049 0.003 12.90 0.15 1.24 0.08

5-616 0.516 0.006 0.103 0.003 13.11 0.15 2.62 0.08

5-1014 0.525 0.007 0.071 0.003 13.34 0.18 1.80 0.08

5-135 0.526 0.007 0.031 0.003 13.36 0.18 0.79 0.08

5-590 0.535 0.007 0.106 0.004 13.59 0.18 2.69 0.10

5-001 0.547 0.007 0.051 0.003 13.89 0.18 1.30 0.08

5-162 0.554 0.007 0.070 0.003 14.07 0.18 1.78 0.08



5-XXX Sizes



59


5-239 0.570 0.007 0.106 0.004 14.48 0.18 2.69 0.10

5-156 0.575 0.007 0.060 0.003 14.61 0.18 1.52 0.08

5-563 0.583 0.007 0.040 0.003 14.81 0.18 1.02 0.08

5-735 0.583 0.007 0.103 0.003 14.81 0.18 2.62 0.08

5-736 0.590 0.007 0.070 0.003 14.99 0.18 1.78 0.08

5-591 0.594 0.007 0.106 0.004 15.09 0.18 2.69 0.10

5-609 0.600 0.007 0.094 0.003 15.24 0.18 2.39 0.08

5-242 0.600 0.007 0.105 0.004 15.24 0.18 2.67 0.10

5-021 0.603 0.007 0.125 0.004 15.32 0.18 3.18 0.10

5-243 0.604 0.007 0.103 0.003 15.34 0.18 2.62 0.08

5-676 0.610 0.007 0.058 0.003 15.49 0.18 1.47 0.08

5-247 0.623 0.007 0.125 0.004 15.82 0.18 3.18 0.10

5-248 0.625 0.007 0.050 0.003 15.88 0.18 1.27 0.08

5-617 0.625 0.007 0.103 0.003 15.88 0.18 2.62 0.08

5-250 0.627 0.007 0.062 0.003 15.93 0.18 1.57 0.08

5-251 0.631 0.007 0.062 0.003 16.03 0.18 1.57 0.08

5-005 0.640 0.007 0.080 0.003 16.26 0.18 2.03 0.08

5-136 0.643 0.007 0.031 0.003 16.33 0.18 0.79 0.08

5-643 0.650 0.007 0.045 0.003 16.51 0.18 1.14 0.08

5-252 0.652 0.007 0.070 0.003 16.56 0.18 1.78 0.08

5-254 0.660 0.007 0.064 0.003 16.76 0.18 1.63 0.08

5-743 0.660 0.007 0.141 0.004 16.76 0.18 3.58 0.10

5-592 0.665 0.007 0.106 0.004 16.89 0.18 2.69 0.10

5-256 0.707 0.008 0.103 0.003 17.96 0.20 2.62 0.08

5-594 0.720 0.008 0.141 0.004 18.29 0.20 3.58 0.10

5-257 0.722 0.008 0.113 0.004 18.34 0.20 2.87 0.10

5-593 0.724 0.008 0.106 0.004 18.39 0.20 2.69 0.10

5-181 0.725 0.008 0.040 0.003 18.42 0.20 1.02 0.08

5-964 0.744 0.008 0.109 0.004 18.90 0.20 2.77 0.10

5-263 0.750 0.008 0.061 0.003 19.05 0.20 1.55 0.08

5-264 0.752 0.008 0.070 0.003 19.10 0.20 1.78 0.08

5-266 0.766 0.008 0.080 0.003 19.46 0.20 2.03 0.08

5-137 0.775 0.008 0.031 0.003 19.69 0.20 0.79 0.08

5-595 0.779 0.008 0.141 0.004 19.79 0.20 3.58 0.10



SIZING CHARTS

5-XXX Sizes



60


5-006 0.796 0.008 0.080 0.003 20.22 0.20 2.03 0.08

5-751 0.820 0.009 0.150 0.005 20.83 0.23 3.81 0.13

5-003 0.836 0.009 0.059 0.003 21.23 0.23 1.50 0.08

5-596 0.838 0.009 0.141 0.004 21.29 0.23 3.58 0.10

5-708 0.850 0.009 0.045 0.003 21.59 0.23 1.14 0.08

5-753 0.857 0.009 0.123 0.004 21.77 0.23 3.12 0.10

5-049 0.871 0.009 0.140 0.004 22.12 0.23 3.56 0.10

5-273 0.879 0.009 0.040 0.003 22.33 0.23 1.02 0.08

5-022 0.890 0.009 0.125 0.004 22.61 0.23 3.18 0.10

5-138 0.898 0.009 0.031 0.003 22.81 0.23 0.79 0.08

5-597 0.905 0.009 0.141 0.004 22.99 0.23 3.58 0.10

5-598 0.968 0.010 0.141 0.004 24.59 0.25 3.58 0.10

5-278 0.979 0.010 0.103 0.003 24.87 0.25 2.62 0.08

5-139 0.987 0.010 0.031 0.003 25.07 0.25 0.79 0.08

5-709 1.000 0.010 0.055 0.003 25.40 0.25 1.40 0.08

5-677 1.004 0.010 0.081 0.003 25.50 0.25 2.06 0.08

5-279 1.004 0.010 0.218 0.005 25.50 0.25 5.54 0.13

5-761 1.010 0.010 0.062 0.003 25.65 0.25 1.57 0.08

5-618 1.016 0.010 0.139 0.004 25.81 0.25 3.53 0.10

5-599 1.031 0.010 0.141 0.004 26.19 0.25 3.58 0.10

5-004 1.070 0.010 0.065 0.003 27.18 0.25 1.65 0.08

5-763 1.080 0.010 0.050 0.003 27.43 0.25 1.27 0.08

5-600 1.094 0.010 0.141 0.004 27.79 0.25 3.58 0.10

5-140 1.112 0.010 0.031 0.003 28.24 0.25 0.79 0.08

5-601 1.153 0.012 0.141 0.004 29.29 0.30 3.58 0.10

5-291 1.186 0.012 0.070 0.003 30.12 0.30 1.78 0.08

5-1028 1.190 0.012 0.250 0.006 30.23 0.30 6.35 0.15

5-602 1.212 0.012 0.141 0.004 30.78 0.30 3.58 0.10

5-294 1.213 0.012 0.149 0.004 30.81 0.30 3.78 0.10

5-295 1.225 0.012 0.275 0.006 31.12 0.30 6.99 0.15

5-141 1.226 0.012 0.031 0.003 31.14 0.30 0.79 0.08

5-296 1.229 0.012 0.070 0.003 31.22 0.30 1.78 0.08

5-297 1.230 0.012 0.197 0.005 31.24 0.30 5.00 0.13

5-301 1.259 0.012 0.092 0.003 31.98 0.30 2.34 0.08



5-XXX Sizes



61


5-603 1.279 0.012 0.141 0.004 32.49 0.30 3.58 0.10

5-157 1.338 0.012 0.092 0.003 33.99 0.30 2.34 0.08

5-604 1.342 0.012 0.141 0.004 34.09 0.30 3.58 0.10

5-605 1.401 0.014 0.141 0.004 35.59 0.36 3.58 0.10

5-780 1.412 0.014 0.073 0.003 35.86 0.36 1.85 0.08

5-008 1.421 0.014 0.080 0.003 36.09 0.36 2.03 0.08

5-670 1.437 0.014 0.070 0.003 36.40 0.36 1.78 0.08

5-142 1.450 0.014 0.047 0.003 36.83 0.36 1.19 0.08

5-312 1.454 0.014 0.105 0.004 36.93 0.36 2.67 0.10

5-657 1.465 0.014 0.103 0.003 37.21 0.36 2.62 0.08

5-606 1.468 0.014 0.141 0.004 37.29 0.36 3.58 0.10

5-980 1.475 0.014 0.275 0.006 37.47 0.36 6.99 0.15

5-024 1.515 0.015 0.125 0.004 38.48 0.38 3.18 0.10

5-320 1.540 0.015 0.070 0.003 39.12 0.38 1.78 0.08

5-158 1.550 0.015 0.092 0.003 39.37 0.38 2.34 0.08

5-009 1.553 0.015 0.080 0.003 39.45 0.38 2.03 0.08

5-321 1.559 0.015 0.139 0.004 39.60 0.38 3.53 0.10

5-788 1.591 0.015 0.071 0.003 40.41 0.38 1.80 0.08

5-034 1.599 0.015 0.139 0.004 40.61 0.38 3.53 0.10

5-327 1.640 0.015 0.139 0.004 41.66 0.38 3.53 0.10

5-143 1.670 0.015 0.047 0.003 42.42 0.38 1.19 0.08

5-329 1.670 0.015 0.070 0.003 42.42 0.38 1.78 0.08

5-1018 1.671 0.015 0.139 0.004 42.44 0.38 3.53 0.10

5-330 1.674 0.015 0.210 0.005 42.52 0.38 5.33 0.13

5-671 1.680 0.015 0.080 0.003 42.67 0.38 2.03 0.08

5-025 1.765 0.016 0.125 0.004 44.83 0.41 3.18 0.10

5-035 1.786 0.016 0.139 0.004 45.36 0.41 3.53 0.10

5-1023 1.788 0.016 0.070 0.003 45.42 0.41 1.78 0.08

5-335 1.802 0.016 0.062 0.003 45.77 0.41 1.57 0.08

5-794 1.812 0.016 0.070 0.003 46.02 0.41 1.78 0.08

5-1042 1.817 0.016 0.257 0.006 46.15 0.41 6.53 0.15

5-795 1.850 0.016 0.070 0.003 46.99 0.41 1.78 0.08

5-981 1.850 0.016 0.275 0.006 46.99 0.41 6.99 0.15

5-011 1.860 0.016 0.080 0.003 47.24 0.41 2.03 0.08



SIZING CHARTS

5-XXX Sizes



62


5-337 1.873 0.016 0.062 0.003 47.57 0.41 1.57 0.08

5-1043 1.882 0.017 0.118 0.004 47.80 0.43 3.00 0.10

5-144 1.891 0.017 0.047 0.003 48.03 0.43 1.19 0.08

5-796 1.913 0.017 0.070 0.003 48.59 0.43 1.78 0.08

5-338 1.925 0.017 0.210 0.005 48.90 0.43 5.33 0.13

5-701 1.937 0.017 0.139 0.004 49.20 0.43 3.53 0.10

5-342 1.980 0.017 0.038 0.003 50.29 0.43 0.97 0.08

5-343 2.000 0.018 0.075 0.003 50.80 0.46 1.91 0.08

5-655 2.020 0.018 0.070 0.003 51.31 0.46 1.78 0.08

5-037 2.036 0.018 0.139 0.004 51.71 0.46 3.53 0.10

5-346 2.046 0.018 0.139 0.004 51.97 0.46 3.53 0.10

5-642 2.051 0.018 0.070 0.003 52.10 0.46 1.78 0.08

5-1044 2.060 0.018 0.139 0.004 52.32 0.46 3.53 0.10

5-027 2.140 0.018 0.125 0.004 54.36 0.46 3.18 0.10

5-1046 2.140 0.018 0.315 0.010 54.36 0.46 8.00 0.25

5-145 2.141 0.018 0.047 0.003 54.38 0.46 1.19 0.08

5-347 2.163 0.018 0.062 0.003 54.94 0.46 1.57 0.08

5-348 2.172 0.018 0.070 0.003 55.17 0.46 1.78 0.08

5-800 2.225 0.018 0.275 0.006 56.52 0.46 6.99 0.15

5-1047 2.281 0.020 0.093 0.003 57.94 0.51 2.36 0.08

5-015 2.296 0.020 0.080 0.003 58.32 0.51 2.03 0.08

5-702 2.312 0.020 0.139 0.004 58.72 0.51 3.53 0.10

5-039 2.411 0.020 0.139 0.004 61.24 0.51 3.53 0.10

5-354 2.471 0.020 0.070 0.003 62.76 0.51 1.78 0.08

5-355 2.524 0.020 0.103 0.003 64.11 0.51 2.62 0.08

5-805 2.535 0.020 0.070 0.003 64.39 0.51 1.78 0.08

5-703 2.563 0.020 0.139 0.004 65.10 0.51 3.53 0.10

5-358 2.576 0.020 0.082 0.003 65.43 0.51 2.08 0.08

5-361 2.671 0.022 0.139 0.004 67.84 0.56 3.53 0.10

5-159 2.683 0.022 0.115 0.004 68.15 0.56 2.92 0.10

5-982 2.725 0.022 0.275 0.006 69.22 0.56 6.99 0.15

5-807 2.782 0.022 0.103 0.003 70.66 0.56 2.62 0.08

5-704 2.812 0.022 0.139 0.004 71.42 0.56 3.53 0.10

5-042 2.846 0.022 0.139 0.004 72.29 0.56 3.53 0.10



5-XXX Sizes



63


5-697 2.878 0.022 0.080 0.003 73.10 0.56 2.03 0.08

5-367 2.924 0.022 0.103 0.003 74.27 0.56 2.62 0.08

5-705 2.937 0.022 0.139 0.004 74.60 0.56 3.53 0.10

5-983 2.975 0.024 0.275 0.006 75.57 0.61 6.99 0.15

5-368 3.020 0.024 0.103 0.003 76.71 0.61 2.62 0.08

5-044 3.036 0.024 0.139 0.004 77.11 0.61 3.53 0.10

5-369 3.037 0.024 0.103 0.003 77.14 0.61 2.62 0.08

5-810 3.041 0.024 0.062 0.003 77.24 0.61 1.57 0.08

5-811 3.060 0.024 0.112 0.004 77.72 0.61 2.84 0.10

5-1052 3.080 0.024 0.111 0.004 78.23 0.61 2.82 0.10

5-374 3.112 0.024 0.070 0.003 79.04 0.61 1.78 0.08

5-557 3.125 0.024 0.103 0.003 79.38 0.61 2.62 0.08

5-813 3.130 0.024 0.100 0.003 79.50 0.61 2.54 0.08

5-815 3.156 0.024 0.060 0.003 80.16 0.61 1.52 0.08

5-045 3.161 0.024 0.139 0.004 80.29 0.61 3.53 0.10

5-816 3.162 0.024 0.070 0.003 80.31 0.61 1.78 0.08

5-819 3.210 0.024 0.103 0.003 81.53 0.61 2.62 0.08

5-984 3.225 0.024 0.275 0.006 81.92 0.61 6.99 0.15

5-821 3.300 0.026 0.070 0.003 83.82 0.66 1.78 0.08

5-825 3.350 0.026 0.275 0.006 85.09 0.66 6.99 0.15

5-1053 3.354 0.026 0.070 0.003 85.19 0.66 1.78 0.08

5-380 3.363 0.026 0.155 0.005 85.42 0.66 3.94 0.13

5-979 3.443 0.026 0.275 0.006 87.45 0.66 6.99 0.15

5-381 3.475 0.026 0.275 0.006 88.27 0.66 6.99 0.15

5-985 3.600 0.026 0.275 0.006 91.44 0.66 6.99 0.15

5-031 3.640 0.028 0.125 0.004 92.46 0.71 3.18 0.10

5-828 3.661 0.028 0.090 0.003 92.99 0.71 2.29 0.08

5-986 3.725 0.028 0.275 0.006 94.62 0.71 6.99 0.15

5-390 3.957 0.028 0.147 0.004 100.51 0.71 3.73 0.10

5-987 3.975 0.028 0.275 0.006 100.97 0.71 6.99 0.15

5-831 4.020 0.030 0.147 0.004 102.11 0.76 3.73 0.10

5-1054 4.080 0.030 0.209 0.005 103.63 0.76 5.31 0.13

5-833 4.085 0.030 0.103 0.003 103.76 0.76 2.62 0.08

5-394 4.096 0.030 0.070 0.003 104.04 0.76 1.78 0.08



SIZING CHARTS

5-XXX Sizes



64


5-988 4.100 0.030 0.275 0.006 104.14 0.76 6.99 0.15

5-395 4.117 0.030 0.070 0.003 104.57 0.76 1.78 0.08

5-396 4.171 0.030 0.070 0.003 105.94 0.76 1.78 0.08

5-989 4.225 0.030 0.275 0.006 107.32 0.76 6.99 0.15

5-060 4.390 0.030 0.044 0.003 111.51 0.76 1.12 0.08

5-836 4.427 0.030 0.140 0.004 112.45 0.76 3.56 0.10

5-401 4.531 0.030 0.070 0.003 115.09 0.76 1.78 0.08

5-1060 4.609 0.033 0.150 0.004 117.07 0.84 3.81 0.10

5-840 4.630 0.033 0.139 0.004 117.60 0.84 3.53 0.10

5-842 4.664 0.035 0.122 0.004 118.47 0.89 3.10 0.10

5-844 4.682 0.035 0.140 0.004 118.92 0.89 3.56 0.10

5-402 4.750 0.035 0.188 0.005 120.65 0.89 4.78 0.13

5-848 4.875 0.035 0.060 0.003 123.83 0.89 1.52 0.08

5-850 4.925 0.035 0.260 0.006 125.10 0.89 6.60 0.15

5-403 4.930 0.035 0.103 0.003 125.22 0.89 2.62 0.08

5-851 4.984 0.035 0.147 0.004 126.59 0.89 3.73 0.10

5-852 5.030 0.035 0.210 0.005 127.76 0.89 5.33 0.13

5-853 5.057 0.035 0.233 0.006 128.45 0.89 5.92 0.15

5-559 5.236 0.035 0.214 0.005 133.00 0.89 5.44 0.13

5-407 5.249 0.035 0.123 0.004 133.32 0.89 3.12 0.10

5-408 5.265 0.035 0.139 0.004 133.73 0.89 3.53 0.10

5-410 5.340 0.035 0.070 0.003 135.64 0.89 1.78 0.08

5-412 5.414 0.035 0.103 0.003 137.52 0.89 2.62 0.08

5-855 5.444 0.035 0.124 0.004 138.28 0.89 3.15 0.10

5-856 5.465 0.035 0.070 0.003 138.81 0.89 1.78 0.08

5-413 5.475 0.035 0.164 0.005 139.07 0.89 4.17 0.13

5-414 5.487 0.035 0.062 0.003 139.37 0.89 1.57 0.08

5-858 5.500 0.035 0.168 0.005 139.70 0.89 4.27 0.13

5-416 5.553 0.035 0.120 0.004 141.05 0.89 3.05 0.10

5-062 5.604 0.040 0.070 0.003 142.34 1.02 1.78 0.08

5-417 5.616 0.040 0.127 0.004 142.65 1.02 3.23 0.10

5-063 5.750 0.040 0.070 0.003 146.05 1.02 1.78 0.08

5-862 5.789 0.040 0.252 0.006 147.04 1.02 6.40 0.15

5-863 5.815 0.040 0.140 0.004 147.70 1.02 3.56 0.10



5-XXX Sizes



65


5-421 5.882 0.040 0.110 0.004 149.40 1.02 2.79 0.10

5-573 5.968 0.040 0.070 0.003 151.59 1.02 1.78 0.08

5-567 5.985 0.040 0.070 0.003 152.02 1.02 1.78 0.08

5-1041 6.023 0.040 0.103 0.003 152.98 1.02 2.62 0.08

5-064 6.350 0.040 0.275 0.006 161.29 1.02 6.99 0.15

5-428 6.361 0.040 0.108 0.004 161.57 1.02 2.74 0.10

5-430 6.482 0.040 0.170 0.005 164.64 1.02 4.32 0.13

5-666 6.520 0.040 0.070 0.003 165.61 1.02 1.78 0.08

5-869 6.609 0.045 0.139 0.004 167.87 1.14 3.53 0.10

5-434 7.108 0.045 0.275 0.006 180.54 1.14 6.99 0.15

5-696 7.110 0.045 0.103 0.003 180.59 1.14 2.62 0.08

5-691 7.139 0.045 0.072 0.003 181.33 1.14 1.83 0.08

5-873 7.230 0.045 0.070 0.003 183.64 1.14 1.78 0.08

5-975 7.425 0.045 0.260 0.006 188.60 1.14 6.60 0.15

5-875 7.580 0.050 0.210 0.005 192.53 1.27 5.33 0.13

5-438 7.613 0.050 0.070 0.003 193.37 1.27 1.78 0.08

5-439 7.640 0.050 0.125 0.004 194.06 1.27 3.18 0.10

5-876 7.674 0.050 0.210 0.005 194.92 1.27 5.33 0.13

5-877 7.802 0.050 0.104 0.003 198.17 1.27 2.64 0.08

5-442 8.015 0.050 0.187 0.005 203.58 1.27 4.75 0.13

5-445 8.277 0.050 0.275 0.006 210.24 1.27 6.99 0.15

5-880 8.350 0.050 0.275 0.006 212.09 1.27 6.99 0.15

5-575 8.875 0.055 0.070 0.003 225.42 1.40 1.78 0.08

5-450 9.071 0.055 0.062 0.003 230.40 1.40 1.57 0.08

5-882 9.162 0.055 0.210 0.005 232.72 1.40 5.33 0.13

5-635 9.370 0.055 0.103 0.003 238.00 1.40 2.62 0.08

5-883 9.820 0.060 0.103 0.003 249.43 1.52 2.62 0.08

5-884 9.984 0.060 0.070 0.003 253.59 1.52 1.78 0.08

5-885 10.171 0.060 0.139 0.004 258.34 1.52 3.53 0.10

5-886 10.178 0.060 0.112 0.004 258.52 1.52 2.84 0.10

5-457 10.232 0.060 0.139 0.004 259.89 1.52 3.53 0.10

5-458 10.340 0.060 0.139 0.004 262.64 1.52 3.53 0.10

5-887 10.343 0.060 0.275 0.006 262.71 1.52 6.99 0.15

5-165 10.359 0.060 0.139 0.004 263.12 1.52 3.53 0.10



SIZING CHARTS

5-XXX Sizes



66


5-889 10.372 0.060 0.104 0.003 263.45 1.52 2.64 0.08

5-976 10.425 0.060 0.260 0.006 264.80 1.52 6.60 0.15

5-890 10.606 0.060 0.103 0.003 269.39 1.52 2.62 0.08

5-623 10.630 0.060 0.139 0.004 270.00 1.52 3.53 0.10

5-464 10.656 0.060 0.070 0.003 270.66 1.52 1.78 0.08

5-891 10.734 0.060 0.139 0.004 272.64 1.52 3.53 0.10

5-466 10.749 0.060 0.210 0.005 273.03 1.52 5.33 0.10

5-469 10.883 0.060 0.103 0.003 276.43 1.52 2.62 0.08

5-471 10.995 0.060 0.149 0.004 279.27 1.52 3.78 0.10

5-894 10.996 0.060 0.103 0.003 279.30 1.52 2.62 0.10

5-474 11.331 0.060 0.275 0.006 287.81 1.52 6.99 0.15

5-898 11.335 0.060 0.103 0.003 287.91 1.52 2.62 0.08

5-476 11.562 0.070 0.275 0.006 293.67 1.78 6.99 0.15

5-069 11.750 0.070 0.139 0.004 298.45 1.78 3.53 0.10

5-900 12.000 0.070 0.187 0.005 304.80 1.78 4.75 0.13

5-480 12.017 0.070 0.285 0.006 305.23 1.78 7.24 0.15

5-482 12.109 0.070 0.139 0.004 307.57 1.78 3.53 0.10

5-164 12.160 0.070 0.210 0.005 308.86 1.78 5.33 0.13

5-901 12.234 0.070 0.139 0.004 310.74 1.78 3.53 0.10

5-485 12.260 0.070 0.139 0.004 311.40 1.78 3.53 0.10

5-486 12.299 0.070 0.137 0.004 312.39 1.78 3.48 0.10

5-902 12.360 0.070 0.210 0.005 313.94 1.78 5.33 0.13

5-487 12.380 0.070 0.139 0.004 314.45 1.78 3.53 0.10

5-488 12.463 0.070 0.103 0.003 316.56 1.78 2.62 0.08

5-569 12.475 0.070 0.139 0.004 316.87 1.78 3.53 0.10

5-905 12.623 0.070 0.140 0.004 320.62 1.78 3.56 0.10

5-906 12.705 0.070 0.070 0.003 322.71 1.78 1.78 0.08

5-907 12.725 0.070 0.275 0.006 323.22 1.78 6.99 0.15

5-908 12.840 0.070 0.139 0.004 326.14 1.78 3.53 0.10

5-611 12.900 0.070 0.159 0.005 327.66 1.78 4.04 0.13

5-619 12.915 0.070 0.139 0.004 328.04 1.78 3.53 0.10

5-492 13.248 0.070 0.139 0.004 336.50 1.78 3.53 0.10

5-070 13.270 0.070 0.139 0.004 337.06 1.78 3.53 0.10



5-XXX Sizes



67


5-910 13.375 0.070 0.210 0.005 339.73 1.78 5.33 0.13

5-071 13.410 0.070 0.139 0.004 340.61 1.78 3.53 0.10

5-072 13.460 0.070 0.210 0.005 341.88 1.78 5.33 0.13

5-493 13.490 0.070 0.139 0.004 342.65 1.78 3.53 0.10

5-494 13.541 0.070 0.210 0.005 343.94 1.78 5.33 0.13

5-495 13.601 0.070 0.139 0.004 345.47 1.78 3.53 0.10

5-496 13.616 0.070 0.141 0.004 345.85 1.78 3.58 0.10

5-498 13.650 0.070 0.139 0.004 346.71 1.78 3.53 0.10

5-500 13.718 0.070 0.275 0.006 348.44 1.78 6.99 0.15

5-912 13.734 0.070 0.139 0.004 348.84 1.78 3.53 0.10

5-1097 13.750 0.070 0.103 0.003 349.25 1.78 2.62 0.08

5-073 13.820 0.080 0.139 0.004 351.03 2.03 3.53 0.10

5-502 14.088 0.080 0.210 0.005 357.84 2.03 5.33 0.13

5-624 14.111 0.080 0.139 0.004 358.42 2.03 3.53 0.10

5-074 14.234 0.080 0.139 0.004 361.54 2.03 3.53 0.10

5-916 14.369 0.080 0.278 0.006 364.97 2.03 7.06 0.15

5-504 14.430 0.080 0.139 0.004 366.52 2.03 3.53 0.10

5-626 14.470 0.080 0.087 0.003 367.54 2.03 2.21 0.08

5-505 14.470 0.080 0.139 0.004 367.54 2.03 3.53 0.10

5-506 14.570 0.080 0.141 0.004 370.08 2.03 3.58 0.10

5-507 14.600 0.080 0.210 0.005 370.84 2.03 5.33 0.13

5-508 14.674 0.080 0.139 0.004 372.72 2.03 3.53 0.10

5-166 14.722 0.080 0.139 0.004 373.94 2.03 3.53 0.10

5-920 14.780 0.080 0.175 0.005 375.41 2.03 4.45 0.13

5-921 14.795 0.080 0.071 0.003 375.79 2.03 1.80 0.08

5-922 14.990 0.080 0.104 0.003 380.75 2.03 2.64 0.08

5-512 15.171 0.080 0.139 0.004 385.34 2.03 3.53 0.10

5-076 15.260 0.080 0.210 0.005 387.60 2.03 5.33 0.13

5-077 15.300 0.080 0.139 0.004 388.62 2.03 3.53 0.10

5-924 15.410 0.080 0.210 0.005 391.41 2.03 5.33 0.13

5-925 15.465 0.080 0.188 0.005 392.81 2.03 4.78 0.13

5-079 15.540 0.080 0.139 0.004 394.72 2.03 3.53 0.10

5-515 15.548 0.080 0.210 0.005 394.92 2.03 5.33 0.13

5-516 15.740 0.080 0.139 0.004 399.80 2.03 3.53 0.10



SIZING CHARTS

5-XXX Sizes



68


5-517 15.750 0.080 0.275 0.006 400.05 2.03 6.99 0.15

5-518 16.031 0.080 0.256 0.006 407.19 2.03 6.50 0.15

5-571 16.234 0.090 0.139 0.004 412.34 2.29 3.53 0.10

5-930 16.285 0.090 0.250 0.006 413.64 2.29 6.35 0.15

5-520 16.435 0.090 0.139 0.004 417.45 2.29 3.53 0.10

5-522 16.507 0.090 0.225 0.006 419.28 2.29 5.72 0.15

5-080 16.575 0.090 0.187 0.005 421.01 2.29 4.75 0.13

5-524 16.640 0.090 0.210 0.005 422.66 2.29 5.33 0.13

5-622 16.750 0.090 0.275 0.006 425.45 2.29 6.99 0.15

5-525 16.765 0.090 0.125 0.004 425.83 2.29 3.18 0.10

5-935 17.100 0.090 0.275 0.006 434.34 2.29 6.99 0.15

5-526 17.250 0.090 0.187 0.005 438.15 2.29 4.75 0.13

5-082 17.250 0.090 0.240 0.006 438.15 2.29 6.10 0.15

5-528 17.268 0.090 0.242 0.006 438.61 2.29 6.15 0.15

5-937 17.390 0.090 0.139 0.004 441.71 2.29 3.53 0.10

5-529 17.455 0.090 0.139 0.004 443.36 2.29 3.53 0.10

5-1100 17.500 0.090 0.139 0.004 444.50 2.29 3.53 0.10

5-939 17.870 0.090 0.210 0.005 453.90 2.29 5.33 0.13

5-083 17.910 0.090 0.139 0.004 454.91 2.29 3.53 0.10

5-084 18.062 0.090 0.281 0.006 458.77 2.29 7.16 0.15

5-533 18.169 0.090 0.096 0.003 461.49 2.29 2.44 0.08

5-1102 18.265 0.090 0.210 0.005 463.93 2.29 5.33 0.13

5-085 18.350 0.090 0.210 0.005 466.09 2.29 5.33 0.13

5-534 18.405 0.090 0.210 0.005 467.49 2.29 5.33 0.13

5-1104 18.500 0.090 0.188 0.005 469.90 2.29 4.78 0.13

5-1105 18.635 0.090 0.139 0.004 473.33 2.29 3.53 0.10

5-943 18.870 0.100 0.275 0.006 479.30 2.54 6.99 0.15

5-944 18.880 0.100 0.139 0.004 479.55 2.54 3.53 0.10

5-947 19.380 0.100 0.139 0.004 492.25 2.54 3.53 0.10

5-540 19.437 0.100 0.375 0.007 493.70 2.54 9.52 0.18

5-541 19.500 0.100 0.250 0.006 495.30 2.54 6.35 0.15

5-086 19.580 0.100 0.210 0.005 497.33 2.54 5.33 0.13

5-948 19.725 0.100 0.210 0.005 501.02 2.54 5.33 0.13

5-950 19.960 0.100 0.139 0.004 506.98 2.54 3.53 0.10



5-XXX Sizes



5-1019 20.180 0.100 0.125 0.004 512.57 2.54 3.18 0.10

5-1010 20.609 0.100 0.139 0.004 523.47 2.54 3.53 0.10

5-088 21.180 0.100 0.147 0.004 537.97 2.54 3.73 0.10

5-547 21.564 0.100 0.139 0.004 547.73 2.54 3.53 0.10

5-953 22.360 0.100 0.132 0.004 567.94 2.54 3.35 0.10

5-089 23.406 0.120 0.281 0.006 594.51 3.05 7.14 0.15

5-551 23.540 0.120 0.139 0.004 597.92 3.05 3.53 0.10

5-090 23.576 0.120 0.139 0.004 598.83 3.05 3.53 0.10

5-552 23.612 0.120 0.275 0.006 599.74 3.05 6.99 0.15

5-167 23.780 0.120 0.375 0.007 604.01 3.05 9.52 0.18

5-168 24.875 0.120 0.250 0.006 631.82 3.05 6.35 0.15

5-169 25.153 0.120 0.214 0.005 638.89 3.05 5.44 0.13

5-091 25.474 0.120 0.139 0.004 647.04 3.05 3.53 0.10

5-170 25.500 0.120 0.275 0.006 647.70 3.05 6.99 0.15

5-171 26.125 0.120 0.275 0.006 663.58 3.05 6.99 0.15

5-173 26.188 0.120 0.210 0.005 665.18 3.05 5.33 0.13

5-631 26.408 0.120 0.139 0.004 670.76 3.05 3.53 0.10

5-172 27.485 0.120 0.275 0.006 698.12 3.05 6.99 0.15

5-092 27.625 0.120 0.275 0.006 701.68 3.05 6.99 0.15

5-955 28.801 0.140 0.275 0.006 731.55 3.56 6.99 0.15

69




SIZING CHARTS


70

Developed primarily for service in petroleum based hydraulic fluids at -40°C to121°C (-40°F to 250°F), Parker's standard Parbak N0300-90 and N1444-90compounds provide the maximum benefits in back-up ring service.Compounds for use in other fluids and for temperatures up to 204°C (400°F)are available on request. Parbaks will stretch up to 50%, and are quickly andeasily installed. Advantagesof the contour design areobtained regardless of howParbaks are installed — theymay be installed with theconcave face in eitherdirection, toward or awayfrom the o-ring.

I.D.W

T Ref.A

.010 R. Max.

Section W-W

A

R

Notes: 1. Parbak sizes are designed to correspond with the Parker 2-xxx, 3-xxx and AS568B series o-ring with which they are used.

2. Complete call-out consists of the digit 8, the dash number for the size wanted and the rubber material.Example: N0300 8-009.

8-XXX Sizes

Parker ID Tol. R T A Tol. W Tol.No. In. ± ±.010 (Ref.) In. ± In. ±

004 .096 .005 .087 .049 .045 .003 .053 .003005 .127006 .140007 .171008 .202009 .234010 .265011 .327012 .390013 .455 .005014 .518 .007015 .580 .009016 .643017 .705018 .768019 .830020 .893021 .955 .009022 1.018 .010023 1.080 .010024 1.143 .010

Parker Series 8-XXX O-Ring Compounds Sizes




71

8-XXX Sizes

Parker ID Tol. R Tol. A Tol. Width Tol.No. In. ± ±.010 Ref. In. ± In. ±

025 1.205 .011026 1.268 .011027 1.330 .011028 1.393 .013029 1.518 .013030 1.643 .013031 1.768 .015032 1.893 .015033 2.018 .018034 2.143035 2.268036 2.393037 2.518 .018038 2.643 .200039 2.768 .200040 2.893 .200 .087 .049 .045 .003 .053 .003041 3.018 .240 .087 .049 .045 .003 .053 .003042 3.268 .024043 3.518 .024044 3.768 .027045 4.018 .027046 4.268 .030047 4.518 .030048 4.768 .030049 5.018 .037050 5.268 .037 .087 .049 .053

102 .077 .005 .129 .053 .086103 .109104 .140105 .171106 .202107 .234108 .265109 .327110 .390111 .452112 .515 .005113 .577 .007114 .640 .009115 .702 .009



SIZING CHARTS


72

8-XXX Sizes


116 .765 .009117 .831 .100118 .893119 .956120 1.018121 1.081122 1.143 .010123 1.206 .012124 1.268125 1.331126 1.393127 1.456128 1.518 .012 .129 .053 .045 .003 .086 .003129 1.581 .015 .129 .053 .045 .003 .086 .003130 1.643131 1.706132 1.768133 1.831134 1.893 .015135 1.956 .017136 2.018137 2.081138 2.143139 2.206140 2.268 .017141 2.331 .020142 2.393143 2.456144 2.518145 2.581146 2.643 .020147 2.706 .022148 2.768 .022149 2.831 .022150 2.893 .022151 3.018 .024152 3.268 .024153 3.518 .024154 3.768 .028155 4.018 .028156 4.268 .030




73

8-XXX Sizes


157 4.518 .030158 4.768 .030159 5.018 .035160 5.268 .035161 5.518 .035162 5.768 .035163 6.018 .035164 6.268 .040165 6.518 .040166 6.768 .040167 7.018 .040168 7.268 .045169 7.518 .045170 7.768 .045171 8.018 .045172 8.268 .050173 8.518 .050174 8.768 .050175 9.018 .050176 9.268 .055177 9.518 .055178 9.768 .055 .129 .053 .045 .086 .003

201 .202 .005 .174 .050 .040 .118 .004202 .265203 .327204 .390205 .455 .005 .174 .050 .040 .003 .118 .004206 .518 .005 .174 .050 .040 .003 .118 .004207 .580 .007208 .643 .009209 .705 .009210 .766 .010211 .828212 .891213 .953214 1.016 .010215 1.078 .010216 1.141 .012217 1.203218 1.266

SIZING CHARTS




74

8-XXX Sizes


219 1.334 .012220 1.397 .012221 1.459 .012222 1.522 .015223 1.647 .015224 1.772 .015225 1.897 .018226 2.022 .018227 2.147 .018228 2.272 .020229 2.397 .020230 2.522 .020231 2.631 .020232 2.756 .024233 2.881234 3.006235 3.131236 3.256237 3.381238 3.506 .024239 3.631 .028240 3.756241 3.881242 4.006243 4.131 .028244 4.256 .030245 4.381246 4.506247 4.631248 4.768 .030249 4.893 .035250 5.018251 5.143252 5.268253 5.393254 5.518255 5.643256 5.768257 5.893258 6.018 .035259 6.268 .040




75

8-XXX Sizes


260 6.518 .040 .174 .050 .040 .003 .118 .004261 6.768 .040 .174 .050 .040 .003 .118 .004262 7.018 .040 .174 .050 .040 .003 .118 .004263 7.268 .045264 7.518 .045265 7.768 .045266 8.018 .045267 8.268 .050268 8.518 .050269 8.768 .050270 9.018 .050271 9.268 .055272 9.518 .055273 9.768 .055274 10.018 .055275 10.518 .055276 11.018 .065277 11.518278 12.018279 13.018280 14.018281 15.018 .065282 15.989 .075283 16.989 .080284 17.989 .085 .174 .050 .040 .003 .118 .004

309 .450 .005 .262 .076 .060 .004 .183 .005310 .513 .005311 .575 .007312 .638 .009313 .700 .009314 .763 .010315 .825316 .888317 .950318 1.013319 1.075 .010320 1.138 .012321 1.200 .012322 1.263 .012323 1.316 .012



SIZING CHARTS


76

8-XXX Sizes


324 1.388 .012325 1.513 .015326 1.638 .015327 1.763 .015328 1.888 .015329 2.013 .018330 2.138 .018331 2.268 .018332 2.393 .018333 2.518 .020334 2.643 .020335 2.768 .020336 2.893 .020337 3.018 .024338 3.143 .024339 3.273 .024340 3.398 .024 .262 .076 .060 .004 .183 .005341 3.523 .024 .262 .076 .060 .004 .183 .005342 3.648 .028343 3.773344 3.898345 4.028346 4.153 .028347 4.278 .030348 4.403349 4.528350 4.653351 4.778352 4.903 .030353 5.028 .037354 5.153 .037355 5.278 .037356 5.403 .037357 5.528358 5.653359 5.778360 5.903361 6.028 .037362 6.278 .040363 6.528 .040364 6.778 .040




77

8-XXX Sizes


365 7.028 .040366 7.278 .045367 7.528 .045368 7.778 .045369 8.028 .045370 8.278 .050371 8.528 .050372 8.778 .050373 9.028 .050374 9.278 .055375 9.528 .055376 9.778 .055377 10.028 .055378 10.528 .060379 11.028 .060380 11.528 .065381 12.028 .065382 13.028 .065383 14.028 .070384 15.028 .070385 16.008 .075386 17.008 .080387 18.008 .085388 19.006 .090389 20.006 .095390 21.006 .095391 22.006 .100392 22.993 .105393 23.993 .110394 24.993 .115395 25.993 .120 .262 .076 .060 .004 .183 .005

425 4.551 .033 .344 .117 .096 .005 .236 .006426 4.676 .033427 4.801 .033428 4.926 .033429 5.051 .037430 5.176431 5.301432 5.426433 5.551



SIZING CHARTS


78

8-XXX Sizes


434 5.676 .037435 5.801 .037436 5.926 .037437 6.051 .037438 6.274 .040439 6.524 .040440 6.774 .040441 7.024 .040442 7.274 .045443 7.524 .045444 7.774 .045445 8.024 .045446 8.524 .055447 9.024 .055448 9.524 .055449 10.024 .055450 10.524 .060 .344 .117 .096 .005 .236 .006451 11.024 .060 .344 .117 .096 .005 .236 .006452 11.524453 12.024454 12.524455 13.024 .060456 13.524 .070457 14.024458 14.524459 15.024460 15.524 .070461 16.004 .075462 16.504 .075463 17.004 .080464 17.504 .085465 18.004 .085466 18.504 .085467 19.004 .090468 19.504 .090469 20.004 .095470 21.004 .095471 22.004 .100472 23.004 .105473 24.004 .110474 25.004 .115475 26.004 .120 .344 .117 .096 .005 .236 .006




79

GeneralNotes



SIZING CHARTS

80




GeneralNotes

Around the corner or around the globe, Parker’s O-Ring Division is there toprovide engineered solutions to tough sealing problems.

The division’s North American headquarters, located in Lexington KY, is thehub of an established worldwide network of 12 o-ring manufacturing locationsand over 200 distributor and service center locations in nine countries.

This network - and the global sales and engineering support it provides -means that customers can always get quality products when and where theyneed them. It also means that sound advice from Parker sealing experts isnever far away.

Serving Industry Worldwide

Parker O-Ring Division’s manufacturing facilities span four continents and nine countries. Some of these facilities include:

Sao Paulo (Brazil) Orillia, ONT (Canada) Shanghai (China) Pleidelsheim (Germany)

Adro (Italy) Matamoros (Mexico) Lexington, KY (USA) Lebanon, TN (USA)



Parker Hannifin CorporationO-Ring Division2360 Palumbo DrivePO Box 11751Lexington, KY 40512-1751Phone: (859) 269-2351Fax: (859) 335-5128www.parkerorings.com

Your Authorized Parker O-Ring Distributor:

TM

For the latest information on Parker O-Ring Division products,visit www.parkerorings.com or contact 1-800-C-PARKER.

Vamac® is a registered trademark of E.I. DuPont de Nemours and Company.Aflas® is a registered trademark of Asahi Glass Co., Ltd.Parbak® is a registered trademark of Parker Hannifin Corporation, Cleveland, OH.Hifluor™, inPHorm™, Parofluor™ and Parofluor ULTRA™ are trademarks of Parker Hannifin Corporation, Cleveland, OH.

09/04-20M-PL

Printed in the USA.

o-ring material offering guide

Documents