oba3 - advanten.fr · oba3 oba3 is a small size omni-directional dual-band antenna. it was designed...

1
Full duplex Dual band Antenna 870 MHz & 1370 MHz OBA3 OBA3 is a small size omni-directional dual-band antenna. It was designed as a solution for full duplex radio systems which require a single antenna with a unique connector, at two different frequencies; 870 MHz and 1370 MHz. Practically, OBA3 is used as an on board antenna for remote control and telemetry in data link system: aerial target, UAV, terrestrial robotics, unmanned camera and binoculars, general video surveillance. When used on board for a data link, OBA3 can be associated with EPA21 high gain antenna to increase the range of the communication if needed. In option, this antenna can be supplied with adequate duplexer, LNA and Power Amplifier. Electrical Data Frequency range 865 - 874 MHz 1350 - 1426 MHz Other frequencies upon request Input impedance 50 Ω VSWR < 1.7:1 Maximum input power 50 W Peak gain > 2 dBi Radiation pattern Omni-directional in azimuth Polarization Vertical Mechanical Data Connector N female Material U.V. stabilized and flame retardant ABS, aluminum base plate Color Black or other upon request Weight 157 gr Dimensions Height: 95 mm (3.74”) Surface: 105mmx105mm (4.13”) Operating temperature - 25 °C to + 70 °C (- 13°F to + 158°F) Relative humidity 0% to 100% Ingress protection IP 65 SPECIFICATIONS 30 route de Fougères - 35510 Cesson-Sévigné - France Tél. +33 (0)2 99 84 13 99 - Fax +33 (0)2 99 84 13 94 [email protected] - www.advanten.fr H-plane E-plane

Upload: others

Post on 14-Oct-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: OBA3 - advanten.fr · OBA3 OBA3 is a small size omni-directional dual-band antenna. It was designed as a solution for full duplex radio systems which require a single antenna with

Full duplex Dual band Antenna870 MHz & 1370 MHz

OBA3

OBA3 is a small size omni-directional dual-band antenna. It was designed as a solution for full duplex radio systems which require a single antenna with a unique connector, at two different frequencies; 870 MHz and 1370 MHz.Practically, OBA3 is used as an on board antenna for remote control and telemetry in data link system: aerial target, UAV, terrestrial robotics, unmanned camera and binoculars, general video surveillance. When used on board for a data link, OBA3 can be associated with EPA21 high gain antenna to increase the range of the communication if needed.In option, this antenna can be supplied with adequate duplexer, LNA and Power Amplifier.

Electrical DataFrequency range 865 - 874 MHz 1350 - 1426 MHz Other frequencies upon requestInput impedance 50 ΩVSWR < 1.7:1Maximum input power 50 WPeak gain > 2 dBiRadiation pattern Omni-directional in azimuthPolarization Vertical

Mechanical DataConnector N femaleMaterial U.V. stabilized and flame retardant ABS, aluminum base plateColor Black or other upon requestWeight 157 gr

Dimensions Height: 95 mm (3.74”) Surface: 105mmx105mm (4.13”)Operating temperature - 25 °C to + 70 °C (- 13°F to + 158°F)Relative humidity 0% to 100%Ingress protection IP 65

SPECIFICATIONS

30 route de Fougères - 35510 Cesson-Sévigné - France Tél. +33 (0)2 99 84 13 99 - Fax +33 (0)2 99 84 13 94 [email protected] - www.advanten.fr

H-plane E-plane