od imperial (asme bpe design)...219.08 264.67 28.0 12’’ 338.0 273.05 314.71 28.0 bs schedule 10s...

CLAMP Ferrule à souder OD 316L poli / CLAMP Lasferrule OD 316L gepolijst

OD IMPERIAL (ASME BPE Design)

Size d1 d2 d6 a

1/2’’ 25 12.7 9.40 21.5

3/4’’ 25 19.05 15.75 21.5

1’’ 50.5 25.40 22.10 21.5

1 1/2’’ 50.5 38.10 34.80 21.5

2’’ 64.0 50.80 47.50 21.5

2 1/2’’ 77.5 63.50 60.20 21.5

3’’ 91.0 76.10 72.90 21.5

3 1/2’’ 106.0 88.9 84.70 21.5

4’’ 119.0 101.60 97.60 21.5

4 1/2’’ 130.0 114.95 110.30 28.0

5’’ 144.4 127.00 123.00 28.0

5 1/2’’ 155.0 140.55 135.76 28.0

6’’ 167.0 154.00 150.00 28.0

6 5/8’’ 183.0 169.35 163.10 28.0

8’’ 233.5 204.00 200.00 28.0

8 5/8’’ 286.1 220.55 213.90 28.0

10’’ 268.0 254.00 250.00 28.0

10 5/8’’ 286.1 273.00 266.30 28.0

12’’ 319.0 304.80 300.80 28.0

12 5/8’’ 338.0 323.80 315.90 28.0

Industrie pharmaceutique | Farmaceutischeindustrie

1Informations données à titre indicatif et sous réserve de modifications éventuelles | Deze inlichtingen worden alleen maar ten tittel van informatie gegeven. Eventuele veranderingen voorbehoud.

Rue de l’Eglise, 22 | B- 1367 Mont-Saint-André | T. +32 81 877 143 | F. +32 81 877 637 | [email protected] | www.balvinox.be

Inox 316L Poli/Gepolisjt

Ra ≤ 0,4 µm

Material certification 3.1

DIN 32 676

Size d1 d2 d6 a

DN 10 34.00 13.00 10.00 18.00

DN 15 34.00 19.00 16.00 18.00

DN 20 34.00 23.00 20.00 18.00

DN 25 50.50 29.00 26.00 21.50

DN 32 50.50 35.00 32.00 21.50

DN 40 50.50 41.00 38.00 21.50

DN 50 64.00 53.00 50.00 21.50

DN 65 91.00 70.00 66.00 21.50

DN 80 106.00 85.00 81.00 21.50

DN 100 119.00 104.00 100.00 21.50

DN 125 155.00 129.00 125.00 28.00

DN 150 183.00 154.00 150.00 28.00

DN 200 233.50 204.00 200.00 28.00

CLAMP Ferrule à souder DIN 316L poli / CLAMP Lasferrule DIN 316L gepolijst





Ra ≤ 0,4µm


BS Schedule 5s

Size d1 d2 d6 a

1/2’’ 50.5 21.34 18.04 21.5

3/4’’ 50.5 26.67 23.37 21.5

1’’ 50.5 33.40 30.10 21.5

1 1/4’’ 64.0 42.16 38.86 21.5

1 1/2’ 64.0 48.26 44.96 21.5

2’’ 77.5 60.33 57.02 21.5

2 1/2’’ 91.0 73.03 68.81 21.5

3’’ 106.0 88.90 84.68 21.5

3 1/2’’ 119.0 101.60 97.38 21.5

4’’ 130.0 114.30 110.08 28.0

5’’ 155.0 141.30 135.76 28.0

6’’ 183.0 168.28 162.74 28.0

8’’ 233.5 219.28 213.54 28.0

10’’ 286.1 273.05 266.25 28.0

12’’ 338.0 323.85 315.93 28.0

CLAMP Ferrule à souder Sch 5s 316L poli / CLAMP Lasferrule Sch 5s 316L gepolijst





Ra ≤ 0,4µm


Size d1 d2 d6 a

1/2’’ 50.5 21.34 17.12 21.5

3/4’’ 50.5 26.67 22.45 21.5

1’’ 50.5 33.40 27.86 21.5

1 1/4’’ 64.0 42.16 36.62 21.5

1 1/2’ 64.0 48.26 42.72 21.5

2’’ 77.5 60.33 54.79 21.5

2 1/2’’ 91.0 73.03 66.93 21.5

3’’ 106.0 88.90 82.80 21.5

3 1/2’’ 119.0 101.60 95.50 21.5

4’’ 130.0 114.30 108.20 28.0

5’’ 155.0 141.30 134.50 28.0

6’’ 183.0 168.28 161.47 28.0

8’’ 233.5 211.56 211.56 28.0

10’’ 286.1 219.08 264.67 28.0

12’’ 338.0 273.05 314.71 28.0

BS Schedule 10s






Ra ≤ 0,4µm


BS Schedule 40s

Size d1 d2 d6 a

1/2’’ 50.5 21.34 15.80 21.5

3/4’’ 50.5 26.67 20.93 21.5

1’’ 50.5 33.40 26.64 21.5

1 1/4’’ 64.0 42.16 35.04 21.5

1 1/2’ 64.0 48.26 40.88 21.5

2’’ 77.5 60.33 52.51 21.5

2 1/2’’ 91.0 73.03 62.71 21.5

3’’ 106.0 88.90 77.92 21.5

3 1/2’’ 119.0 101.60 90.12 21.5

4’’ 130.0 114.30 102.26 28.0

5’’ 155.0 141.30 128.20 28.0

6’’ 183.0 168.28 154.06 28.0

8’’ 233.5 211.56 202.72 28.0

10’’ 286.1 219.08 254.51 28.0

12’’ 338.0 273.05 304.79 28.0






Ra ≤ 0,4µm


ISO 1127Size d1 d2 d6 a

DN 8 / 25 25.0 13.50 10.30 21.5

DN 8 / 34 34.0 13.50 10.30 18.0

DN 10 / 25 25.0 17.20 14.00 21.5

DN 10 / 34 34.0 17.20 14.00 18.0

DN 15 / 50.5 50.5 21.30 18.10 21.5

DN 15 / 34 34.0 21.30 18.10 18.0

DN 20 / 50.5 50.5 26.90 23.70 21.5

DN 20 / 50.5 50.5 26.90 22.90 21.5

DN 25 / 50.5 50.5 33.70 29.700 21.5

DN 32 / 50.5 50.5 42.40 38.40 21.5

DN 32 / 64 64.0 42.40 38.40 21.5

DN 40 / 64 64.0 48.30 44.30 21.50

DN 50 / 77.5 77.5 60.30 56.30 21.50

DN 65 / 91 91.0 76.10 72.10 21.50

DN 80 / 106 106.0 88.90 84.90 21.50

DN 100 / 130 130.0 114.3 110.3 28.50

DN 125 / 155 155.0 139.7 135.7 28.0

DN 150 / 183 183.0 168.30 163.10 28.0

DN 200 / 233 233.5 219.10 213.90 28.0

DN 250 / 286 286.1 273.0 267.80 28.0

DN 300 / 338 338.50 323.90 318.70 28.0

CLAMP Ferrule à souder ISO 316L poli / CLAMP Lasferrule ISO 316L gepolijst





Ra ≤ 0,4µm



Inox 316L Poli/Gepolijst

Ra ≤ 0,4µm Material certification 3.1

Size d6 a

1/2’’-3/4’’ 25.0 6.0

1’’-1 1/2’’ 50.5 6.0

2’’ 64.0 7.0

2 1/2’’ 77.5 7.0

3’’ 91.0 7.0

3 1/2’’ 106.0 7.0

4’’ 119.0 7.0

4 1/2’’ 130.0 7.0

5’’ 144.4 8.0

5 1/2’’ 155.0 10.0

6’’ 167.0 11.0

6 5/8’’ 183.0 10.0

8’’ 217.4 10.0

8 5/8’’ 233.5 10.0

10’’ 268.0 10.0

10 5/8’’ 286.1 10.0

12’’ 319.0 10.0

Clamp Bouchon plein / Clamp Blind Ferrule

OD IMPERIAL DIN 32 676

Size d6 a

DN 10-15-20 34.0 6.0

DN 25-40 50.5 6.00

DN 50 64.0 7.0

DN 65 91.0 7.0

DN 80 106.0 7.0

DN 100 119.0 7.0

DN 125 155.0 10.0

DN 150 183.0 10.0

DN 200 233.5 10.0

DN 250 268.0 10.0

DN 300 319.0 10.0



Collier massif Inox S Type / Klem massieve RVS S Type

Size A B C W Poids

1/2’’ - 3/4’’ 25.4 63.0 60.0 17.0 0.13

10/15/20 34.0 73.0 69.0 17.0 0.17

1’’- 1 1/2’’ 50.5 78.0 85.0 17.0 0.21

2’’ 64.0 82.0 99.0 17.0 0.25

2 1/2’ 77.5 89.0 112.0 17.0 0.35

3’’ 91.0 96.0 126.0 17.0 0.42

3 1/2’’ 106.0 103.0 140.0 17.0 0.44

4’’ 119.0 110.0 154.0 17.0 0.51

4 1/2’’ 130.0 115.0 165.0 17.0 0.60

6’’ 167.0 134.0 216.0 25.0 0.88

S TYPE - 287 A


Inox 316L Poli/Gepolijst Fabrication européene/ Europese productie




Collier massif Inox SH Type / Klem massieve RVS SH Type

Size A B C W Weight

1/2’’ - 3/4’’ 25.4 63.0 75.0 17.0 0.15

1’’ - 1 1/2’’ 50.5 77.0 102.0 17.0 0.25

2’’ 64.0 93.0 123.0 17.0 0.33

2 1/2’ 77.5 100.0 140.0 17.0 0.38

3’’ 91.0 105.0 150.0 17.0 0.44

3 1/2’’ 106.0 110.0 165.0 17.0 0.44

4’’ 119.0 119.0 185.0 17.0 0.57

4 1/2’’ 130.0 119.0 191.0 17.0 0.60

5’’ 144.0 131.0 215.0 19.0 0.75

5 1/2’’ 155.0 155.0 252.0 24.0 1.39

6’’ 167.0 156.0 262.0 24.0 1.38

6 5/8’’ 183.0 164.0 280.0 24.0 1.61

8’’ 217.0 184.0 325.0 24.0 2.11

8 5/8’’ 233.0 185.0 333.0 24.0 2.25

SH - TYPE






Collier massif Inox SH Type / Klem massieve RVS SH Type

SSH-TYPE

Size A B C W Poids

1/2’’ - 3/4’’ 25.4 34.0 65.0 16.0 0.16

10/15/20 34.0 42.0 74.0 18.0 0.22

1’’- 1 1/2’’ 50.5 64.0 103.0 26.0 0.66

2’’ 64.0 67.0 113.0 26.0 0.82

2 1/2’ 77.5 75.0 128.0 26.0 0.94

3’’ 91.0 80.0 137.0 26.0 1.02

3 1/2’’ 106.0 88.0 150.0 26.0 1.07

4’’ 119.0 93.0 165.0 26.0 1.27

4 1/2’’ 130.0 97.0 174.0 26.0 1.33

6’’ 167.0 132.0 240.0 26.0 1.93

6 5/8’’ 183.0 142.0 260.0 26.0 2.11

8 5/8’’ 233.0 168.0 318.0 26.0 2.52



3

Informations données à titre indicatif et sous réserve de modifications éventuelles | Deze inlichtingen worden alleen maar ten tittel van informatie gegeven. Eventuele veranderingen voorbehoud.

Rue de l’Eglise, 22 | B- 1367 Mont-Saint-André | T. +32 81 877 143 | F. +32 81 877 637 | [email protected] |


Clamp Joint de raccord (avec rebord)/ Clamp koppeling dichting

OD IMPERIAL

Size a b

1/2’’ 22.0 10.2

3/4’’ 22.0 16.2

1’’ 50.5 22.5

1 1/2’’ 50.5 35.3

2’’ 64.0 47.8

2 1/2’’ 77.5 60.5

3’’ 91.0 73.1

4’’ 119.0 97.7

4 1/2’’ 130.0 110.3

5’’ 144.4 123.0

5 1/2’’ 155.0 135.76

6’’ 167.0 147.2

6 5/8’’ 183.0 163.1

8’’ 218.0 197.6

8 5/8’’ 233.50 213.90

10’’ 268.0 247.4

10 5/8’’ 286.10 266.3

12’’ 319.0 298.20

- EPDM

- PTFE Env/CoEur viTon

- PTFE Env/CoEur EPDM

- SiliConE PlaTinuM - TEFlon

- viTon




SUR DEMANDE

- FDA Cfr Title 21 Section 177.2600- USP XXII Class VI-121°C., Section 87 & 88, Biological Reactivity Test, in Vivo- Batch-Nr Laser Marked = Traçabilité optimale (SILICONE and EPDM Gaskets only).- 3-A Sanitary Standards- USDA Standards- Cytotoxicity Criteria- E.P. 3.1.9 (European Pharmacopea) (pour SILICONE)- USP <381> (pour EPDM et VITON)- USP <661> (pour PTFE) FDA Cfr Title 21 Section 177.2600

Ø 1/2’’ - 3/4’’ Ø 1’’ - 12’’

Clamp Joint de raccord (sans rebord)/ Clamp koppeling dichting

OD IMPERIAL



Ø 1/2’’ - 3/4’’ Ø 1’’ - 12’’

SUR DEMANDE

- FDA Cfr Title 21 Section 177.2600- USP XXII Class VI-121°C., Section 87 & 88, Biological Reactivity Test, in Vivo- Batch-Nr Laser Marked = Traçabilité optimale (SILICONE and EPDM Gaskets only).- 3-A Sanitary Standards- USDA Standards- Cytotoxicity Criteria- E.P. 3.1.9 (European Pharmacopea) (pour SILICONE)- USP <381> (pour EPDM et VITON)- USP <661> (pour PTFE) FDA Cfr Title 21 Section 177.2600- USP XXII Class VI-121°C., Section 87 & 88, Biological Reactivity Test, in Vivo- Batch-Nr Laser Marked = Traçabilité optimale (SILICONE and EPDM Gaskets only).- 3-A Sanitary Standards- USDA Standards- Cytotoxicity Criteria- E.P. 3.1.9 (European Pharmacopea) (pour SILICONE)- USP <381> (pour EPDM et VITON)- USP <661> (pour PTFE)

Size a b

1/2’’ 22.0 10.2

3/4’’ 22.0 16.2

1’’ 50.5 22.5

1 1/2’’ 50.5 35.3

2’’ 64.0 47.8

2 1/2’’ 77.5 60.5

3’’ 91.0 73.1

4’’ 119.0 97.7

4 1/2’’ 130.0 110.3

5’’ 144.4 123.0

5 1/2’’ 155.0 135.76

6’’ 167.0 147.2

6 5/8’’ 183.0 163.1

8’’ 218.0 197.6

8 5/8’’ 233.50 213.90

10’’ 268.0 247.4

10 5/8’’ 286.10 266.3

12’’ 319.0 298.20

- EPDM




- viTon


Clamp Joint de raccord DIN (avec rebord)/ Clamp koppeling dichting

DIN 32 676



DN a b

DN 10 34.0 10.0

DN 15 34.0 16.0

DN 20 34.0 20.0

DN 25 50.5 50.5

DN 32 50.5 50.5

DN 40 50.5 50.5

DN 50 64.0 64.0

DN 65 91.0 91.0

DN 80 106.0 106.0

DN 100 119.0 119.0

DN 125 155.0 155.0

DN 150 183.0 183.0

DN 200 233.5 233.5

DN 250 268.0 268.0

DN 300 319.0 319.0

SUR DEMANDE


DN 10 - 300

- EPDM




- viTon




Clamp Joint de raccord ISO (Avec rebord)/ Clamp koppeling dichting

DN 8 / 25 - DN 10 / 25 DN 8 / 34 - DN 10/34 DN 15 - DN 300

ISO 1127

SUR DEMANDE


Size a b

DN 8 / 25 10.3 22.0

DN 8 / 34 10.3 34.0

DN 10 / 25 14.0 22.0

DN 10 / 34 14.0 34.0

DN 15 / 50.5 18.1 50.5

DN 15 / 34 18.1 34.0

DN 20 / 50.5 22.9 50.5

DN 20 / 50.5 22.9 50.5

DN 25 / 50.5 29.7 50.5

DN 32 / 50.5 38.4 50.5

DN 32 / 64 38.4 64.0

DN 40 / 64 44.3 64.0

DN 50 / 77.5 56.3 77.5

DN 65 / 91 72.10 91.0

DN 80 / 106 84.9 106.0

DN 100 / 130 110.3 130.0

DN 125 / 155 135.7 155.0

DN 150 / 183 163.1 183.0

DN 200 / 233 213.9 233.5

DN 250 / 286 267.8 286.1

DN 300 / 338 318.7 338.5

- EPDM




- viTon





Clamp Screen gaskets

Mesh Micron Retention

Ouverture mailles (mm)

4 5156 5.166 3340 2.798 2464 2.46

10 1905 1.9112 1532 1.5316 1130 1.1318 1081 1.0820 864 0.8624 703 0.7030 516 0.5240 381 0.3850 318 0.3260 233 0.2380 140 0.14

100 140 0.14120 118 0.12150 103 0.10180 83 0.08

200 x 200 74 0.07250 x 250 61 0.06325 x 325 40 0.04

ASME-BPE standards

- EPDM Ø 1/2’’ - 6’’

- SiliConE PlaTinuM Ø 1/2’’ - 6’’

- viTon Ø 1/2’’ - 6’’ - PTFE Ø 1/2’’ - 12’’

SUR DEMANDE

- FDA Cfr Title 21 Section 177.2600 - USP XXII Class VI-121°C., Section 87 & 88, Biological Reactivity Test, in Vivo - 3-A Sanitary Standards - USDA Standards - E.P. 3.1.9 (European Pharmacopea) (pour SILICONE) - USP <381> (pour EPDM et VITON) - USP <661> (pour PTFE) FDA Cfr Title 21 Section 177.2600 - 3-A Sanitary Standards - Certificat matiere 10204/3.1



Clamp Adaptation Clamp/Mâle cônique BSP / Clamp Aanpassingstuk Clamp/BSP


Ra ≤ 0,4µm Material certification 3.1 Filet BSPT/Gaz (NPT sur demande)


DIAM. 1/2’’ - 3/4’’ 1’’ - 1’’1/2 2’’ 2’’1/2 3’’ 4’’a 28.0 28.0 35.0 50.0 60.0 60.0d6 25.0 50,5 64.0 77,5 91.0 119.0b 1/4’’ - 1/2’’ 1/4’’ - 1’’ 1/4’’ - 1’’ 1/4’’ - 1’’ 1/4’’ - 6/4’’ 1/2’’ - 2’’

OD IMPERIAL

DIN 32 676DIAM. 10 – 15 -20 25 – 32 - 40 50 65 80 100a 28 28 35 50 60 60d6 34 50,5 64 91 106 119b 1/4’’ - 1/2’’ 1/4’’ - 1’’ 1/4’’ - 1’’ 1/4’’ - 1’’ 1/4’’ - 6/4’’ 1/2’’ - 2’’

Clamp Adaptation Clamp/Femelle BSP/ Clamp Aanpassingstuk Clamp/BSP


Ra ≤ 0,4µm Material certification 3.1 Filet BSPT/Gaz (NPT sur demande)

DIAM. 1/2’’ - 3/4’’ 1’’ - 1’’1/2 2’’ 2’’1/2 3’’ 4’’a 28.0 28.0 35.0 50.0 60.0 60.0d6 25.0 50,5 64.0 77,5 91.0 119.0b 1/4’’ - 1/2’’ 1/4’’ - 1’’ 1/4’’ - 1’’ 1/4’’ - 1’’ 1/4’’ - 6/4’’ 1/2’’ - 2’’

OD IMPERIAL

DIN 32 676DIAM. 10 – 15 -20 25 – 32 - 40 50 65 80 100a 28 28 35 50 60 60d6 34 50,5 64 91 106 119b 1/4’’ - 1/2’’ 1/4’’ - 1’’ 1/4’’ - 1’’ 1/4’’ - 1’’ 1/4’’ - 6/4’’ 1/2’’ - 2’’

Industrie pharmaceutique | FarmaceutischeindustrieClamp Embout pour flexible / Clamp Slangclampstuk

OD IMPERIAL

DIAM. 1/2’’ - 3/4’’ 1’’ - 1’’1/2 2’’ 2’’1/2 3’’ 4’’a 25 50,5 64 77,5 91 119b 40 40 58,7 59,5 78,6 86,5

d(Autres dimensionspossible sur demande)

68

1012

13,71618

21,3

68

1012

13,71618

21,325,438,1

101216182127344353

212734435368

43536883

536883

103





DIN 32 676

DIAM. 10-15-20 25-32-40 DN 50 DN 65 DN 80 DN 100a 34 50,5 64 91 106 119b 40 40 60 80 85 90

d(Autres dimensionspossible sur demande)

68

1012

13,71618

21,3

68

1012

13,71618

21,325,438,1

101216182127344353

212734435368

43536883

536883

103

Industrie pharmaceutique | FarmaceutischeindustrieClamp Réduction concentrique / Clamp Verloop stuck concentrische


Ra ≤ 0,4µm/0,8µm Material certification 3.1

OD IMPERIALDIAM. 3/4’’x1/2’’ 1’’x1/2’’ 1’’x3/4’’ 1’’1/2x1/2 1’’1/2x3/4 1’’1/2x1’’ 2’’x1’’1/2 2’’1/2x2’’ 3’’x2’’ 3’’x2’’1/2 4’’x3’’

d1 25 50,5 50,5 50,5 50,5 50,5 64 77,5 91 91 119d6 15,75 22,1 22,1 34,8 34,8 34,8 47,5 60,2 72,8 72,8 97,2d2 25 25 25 25 25 50,5 50,5 64 64 77,5 91d7 9,4 9,4 15,75 9,4 15,75 22,1 34,8 47,5 47,5 60,2 72,8L 54 50,8 50,8 50,8 50,8 92,4 92,4 92,4 92,4 92,4 92,4

DIN 32 676DIAM 25 x 15 25 x 20 40 x 15 40 x 20 40 x 25 50 x 40 65 x 50 80 x 50 80 x 65 100x80

a 50,5 50,5 50,5 50,5 50,5 64 91 106 106 119d6 26 26 38 38 38 50 66 81 81 100b 34 34 34 34 50,5 50,5 64 64 91 106

d7 16 19 16 19 26 38 50 50 66 81L 70 79 80 86 94





Clamp Coude 90°/ Clamp Bocht 90°



OD IMPERIALDIAM. 1/2’’ 3/4’’ 1’’ 1’’1/2 2’’ 2’’1/2 3’’ 4’’a 25 25 50,5 50,5 64 77,5 91 119d6 9,4 15,75 22,1 34,8 47,5 60,2 72,8 97,2L 88 88 50 70 88,9 108 127 168


DIAM. DN 10 DN 15 DN 20 DN 25 DN 32 DN 40 DN 50 DN 65 DN 80 DN 100a 34.0 34.0 34.0 50.5 50.5 50.5 64.0 91.0 106.0 119.0d6 10.0 16.0 19.0 26.0 32.0 38.0 50.0 66.0 81.0 100.0L 44.0 53.0 58.0 63.0 68.0 73.0 83.0 93.0 103.0 113.0

DIN 32 676

Clamp Té égal/ Clamp T-stuk



OD IMPERIALDIAM. 1/2’’ 3/4’’ 1’’ 1’’1/2 2’’ 2’’1/2 3’’ 4’’a 25 25 50,5 50,5 64 77,5 91 119d6 9,4 15,75 22,1 34,8 47,5 60,2 72,8 97,2L 66.6 66.6 60.3 69.9 88.9 88.9 95,3 114,3

DIN 32 676DIAM. DN 10 DN 15 DN 20 DN 25 DN 32 DN 40 DN 50 DN 65 DN 80 DN 100a 34.0 34.0 34.0 50.5 50.5 50.5 64.0 91.0 106.0 119.0d6 10.0 16.0 19.0 26.0 32.0 38.0 50.0 66.0 81.0 100.0L 39.0 48.0 53.0 63.0 68.0 73.0 83.0 93.0 103.0 113.0

CLAMP Clapet anti-retour 316 L poli - TFM®1705 (Art. 048)/ Clamp Terugslagklep



Designed for Aseptic and High Purity Applications. Two material: PTFE and AISI 316L without asymptotic seals. Internal design free from entrapment areas, no screws or threadings or O-Rings inside the valve. PTFE piston full machined from solid and extra-soft AISI 316L spring. Laser marking for traceability and validation processes. Material 3.1 certificates, FDA or USP, internal surface finishing check as standard. Int. finishing : Ra ≤ 0,4 µm Ext. finishing: Ra ≤ 0,8 µm Mirror Polished

Max Working Conditions: 10 bar (120 psi) and 150°C (300°F) Gaskets: USP CLASS VI – 70° PTFE or USP CLASS VI – 121° PTFE

OD IMPERIAL

N° Name Material1 Short Body AISI 316L2 Clamp AISI 3043 Clamp Gasket PTFE4 Spring AISI 316L5 Piston PTFE6 Long Body AISI 316L


Diam. BAR PSI1/2’’ 0.025 0.36

3/4’’ 0.020 0.29

1’’ 0.010 0.15

1 1/2’’ 0.010 0.15

2’’ 0.010 0.15

2 1/2’’ 0.010 0.15

Diam. BAR PSI1/2’’ 0.03 0.44

3/4’’ 0.025 0.36

1’’ 0.025 0.36

1 1/2’’ 0.025 0.36

2’’ 0.025 0.36

2 1/2’’ 0.03 0.44

Diam. BAR PSI1/2’’ 0.010 0.15

3/4’’ 0.010 0.15

1’’ 0.010 0.15

1 1/2’’ 0.010 0.15

2’’ 0.015 0.22

2 1/2’’ 0.015 0.22

Pression d’ouverture indicative - Minimum opening pressure - Indicative data only

DIAM. 1/2’’’ 3/4’ 1’’ 1’’1/2 2’’ 2 1/2’’A 25.0 25.0 50,4 50,54 63.9 77.4

B 9.4 15.75 22,1 34,8 47.5 60.2

L 70.0 70.0 85.0 90.0 125.0 125.0

od imperial (asme bpe design)...219.08 264.67 28.0 12’’ 338.0 273.05 314.71 28.0 bs schedule 10s...

Documents