odorgone - amazon s3 · complies with health canada's standards for use in medical marijuana...
TRANSCRIPT
OdorGone® INDUSTRIAL ODOR AND DUST CONTROL
OG INDUSTRIES, INC. Drexel Hill, PA. 19026 USA
Web site- www.odorgone.com Email- [email protected]
Phone – 1-610-623-6747 USA – 1-800-930-9227
ENVIRONMENTALLY RE
SPON
SIB
LE
SOL
UT
ION
S INDUSTRIES
G O
OdorGone® INDUSTRIAL
Odor Control Systems &
Applications 1-800-930-9227
[email protected] www.odorgone.net
OUR PRODUCT
OdorGone® INDUSTRIAL
An Eco-Degradable, Environmentally Responsible Odor Neutralizer.
OdorGone® Industrial Odor Neutralizer is specially developed for MicroCool fogging systems.
OdorGone will maintain the peak system performance and long life you expect. OdorGone keeps pump
internals clean, system running smooth and nozzles clog resistant so the infinite variety of noisome
odors throughout your facility are continually neutralized at the highest dilution rates possible.
The optimal dilution rate is achieved when neither the odor nor the OdorGone can be detected, leaving
zero odor off the property. OdorGone also meets your demand for a safe, environmentally friendly
product so environmental responsibility is not a question.
OdorGone will eliminate unwanted airborne, static, or imbedded odors almost instantly.
OdorGone is specifically formulated for emergency odor neutralization and daily odor control
throughout the waste industry.
OdorGone will neutralize the unlimited variety of noisome odors that result in community
complaints and hostile neighbors.
OdorGone will replace the hazardous chemical masking agents and perfume fragrant products
available today.
OdorGone will meets your demand for a safe, environmentally friendly product so environmental
responsibility is not a question.
* Hydrogen Sulfide Removal...
99.6%
* No Enzymes...
* No Alcohols...
* No Perfume Fragrances...
* No Chemical Masking Agents...
CANNABIS ODOR CONTROL MICROCOOL FOG APPLICATION
The pervasive, heavy scent of the cannabis plant during the flowering stage is a concern for every cannabis grower. Municipalities are beginning to pass regulations around noisome odors that can invade a community’s quality of life. This is especially true in cities or counties which have enacted special zones for marijuana grow facilities. Failure to provide an adequate odor control system can generate complaints and potentially escalate into costly environmental fines and penalties.
Eliminating (not masking) unpleasant odors is the
answer – OdorGone and MicroCool has the solution.
The Solution Greenhouse exhaust fans are fitted with a ring of MicroCool nozzles thatatomize liquids under high-pressure into billions of micro-fine water droplets (or fog). The MicroCool system injects a highly concentrated (1:1000) mixture of odor-neutralizer into the water fog before dispersing into the air. The droplets’ small size (1/10th the diameter of a human hair) creates more surface area which speeds evaporation, instantly releasing the odor-neutralizing product that traps airborne odors and biodegrades the unpleasant smell.
The complete system includes high-pressure pumps, distribution lines, fog rings and injector(s). One pump unit can accommodate multiple exhaust points and support separate zones as required.
Recommended Odor Neutralizer There are many products on the market that simply mask odors and can contain harmful and equally noxious chemicals. MicroCool partners with OdorGone® industrial strength odor neutralizer to completely absorb and eliminate odors. Their non-toxic, eco-friendly botanical extracts have undergone extensive tests and provide a safe solution that works well with MicroCool’s systems.
For more odor neutralizer information, please contact:[email protected] or www.odorgone.com.
Traps airborne odors almost instantly Provides non-toxic odor elimination Avoids costly fines Why Choose MicroCool Fog? MicroCool has built a 35+ year track record of building fog systems for use in horticulture greenhouses around the world. High-pressure fog systems main-tain constant temperature and humidification levels while integrating with existing climate computers, ventilation systems and other control elements.
Our fog systems have been utilized in a wide variety of odor control applications in industries where noxious odors are an unwelcome by-product. From waste transfer stations to sewage treatment plants, odor elimination is effective and environmentally safe.
MicroCool fog systems are the perfect fit for optimizing cannabis growth while maintaining an odor free grow facility.
World leaders in fog and mist technology for cooling,
humidification, air quality control
OdorGone can be atomized, sprayed, squirted, sponged, mopped or poured to reach and neutralize the
odor at its source.
OdorGone’s natural signature scent is derived from
a proprietary blend of botanicals or plant extracts
that will neutralize along with the unwanted odor.
We like to say, OdorGone will bring your
environment “Back to Natural”.
OdorGone is uniquely formulated to maintain peak
performance and long life for odor control Systems
and Scrubbers
OdorGone keeps nozzles clean and clog resistant,
keeps pump internals clean and running smooth, so
odors are continually neutralized at the highest
dilution rates possible.
OUR SYSTEMS OdorGone Odor Control Systems will produce
an OdorGone infused fog barrier with droplets
10 microns or less through a patented nozzle
system to
neutralize odors
at the source,
long before they
can generate any
odor complaints.
OdorGone systems come complete, ready for power and water hook up and
come with all the parts necessary for a quick and easy installation.
Odor
Complaints
Outside
Inside
Big
or
Small
OdorGone®
Will
Neutralize
Them
All
360º Adjustable
MixRite Proportional Injector
OdorGone ® INDUSTRIAL
Product Description Environmenrally responsible, industrial strength odor neutralizer for the waste industry, in atomizing
systems, scrubbers and topical applications. Eliminates airborne, static and embedded odors.
Product Features Non-toxic ,eco-degradable, bio-degradable, water soluble, dilutable, natural ingredients, neutral pH.
No olfactory desensitizing chemicals, masking agents, scents or perfume fragrances.
No enzymes, live bacteria, microbes, alcohol, propellants, VOC's or hazardous chemical ingredients.
Concentrated for convenience, OdorGone- BULK- BLEND is a highly dilutable, non-clogging formulation.
Safe to handle, safe to ship, safe to store, and carries no spill or respiratory warnings.
Applications Used Worldwide at Waste Water Treatment Plants, Pump Stations, Press Rooms, Transfer Stations,
Landfills, Recycling and Compost Facilities, Medical Marijuana Producers.
Unique technology Bonds with odor molecules to create a natural biodegradation process that permanently neutralizes
odors leaving your environment completely odor free or as we like to say…“Back to Natural”
Uniquely formulated for atomizing systems and scrubbers to maintain peak performance and long life.
Will keep nozzles clean and clog resistant, and pump internals clean and running smooth.
Continually neutralize an infinite variety of noisome odors at the highest dilution rates.
Testing / Methods 99.6% Hydrogen Sulfide (H2S) removal efficiency using test methods; USEPA 1,2,3,4,11 and ASTM E-679
Complies with; Boeing D6-7127 Revision L, ASM 1550 B, and USDA classification - C1,
Complies with Health Canada's Standards for use in Medical Marijuana Odor Control
User Benefits Immediately eliminates an unlimited variety of industrial malodors, and within a few minutes the
scent of OdorGone's natural ingredients also disappears, leaving the environment odor free.
Proven performance worldwide - Safe for use outdoors and indoors
Environmentally Responsible Solution - "Safe around People, Pets, and the Earth"
Not a cover-up fragrance; leaves the environment "Fresh, Clean and Natural;"
Can be atomized, sprayed, mopped, sponged, poured or squirted where needed.
Use in high-pressure systems, turbo fans, drum top foggers, misters, pump sprayers and ventilation.
Replace caustics and chlorine, and eliminate the hazards of handling, storage and corrosion
Safe on vegetation, painted and unpainted surfaces, concrete, cinderblock, brick, stucco, hardwood, tile,
woodwork, plastic, vinyl, tedlar, rubber, fabric, upholstery, leather, naugahyde and carpet.
Bonus Add to power washers, cleaning solutions, holding tanks
Summery There are many odor control products available that claim to be the answer, but most contain hazardous
chemicals with questionable health risks or warnings when used. In the end they just turn out to be
spurious irritating cover ups, nauseating perfumes or expensive fruity fragrances that soon wear off.
Today’s consumers are extremely health conscious and demand safe, environmentally friendly products
capable of handling the infinite variety of noisome odors that invade their quality of life.
OdorGone is an environmentally friendly odor neutralizer that maintains the highest standards and supports
your reputation for environmentally responsible solutions that exceed all expectations.
OdorGone ® Performs Where Others Fail
OG Industries, Inc.January, 2017
[email protected]/info/industrial.html Phone...800-930-9227
USA...610-623-6747
OdorGone® INDUSTRIAL ODOR NEUTRALIZER …Is an environmentally responsible, stand-alone, “Eco-Degradable” odor neutralizer. OdorGone is specifically formulated for emergency odor neutralization and daily odor control throughout the waste industry. OdorGone will neutralize the unlimited variety of noisome that result in community complaints and hostile neighbors. OdorGone will replace the hazardous chemical masking agents and perfume fragrant products available today.
OdorGone is manufactured in America by an Exothermic Reaction Synthesis; creating a proprietary, one of a kind odor neutralizer of non-toxic, eco-degradable” botanical extracts, all having a long history of safety in use. The result of the process is a water base compound that features a semi-rigid, concave molecular structure giving OdorGone the unique ability to capture and hold malodor such as mercaptans, amines and sulphides. We prefer the term "Eco-Degradable" rather than the more restrictive term biodegradable. The reason is the degradation of OdorGone can go on even without a living organism. OdorGone has built into the molecules weak points, making them eco-degradable, such that they are destroyed naturally after performing their task by degrading to biological inert fragments, leaving your environment completely odor free.
OdorGone will eliminate all unwanted airborne, static, or imbedded odors almost instantly. With multi-purpose applications, OdorGone can be atomized, sprayed, squirted, sponged, mopped or poured to reach and neutralize the odor at its source. OdorGone contains no enzymes, alcohols, perfume fragrances or chemical masking agents. OdorGone’s natural signature scent is derived from a proprietary blend of botanicals or plant extracts that will neutralize along with the unwanted odor. As we like to say…Bring your environment “Back to Natural” so environmental responsibility is not a question.
BIO-SOLIDS RECYCLING, CLARIFIERS, COMPOSTING, DIGESTERS, FISHERIES, GRIT
ROOMS, HAZMAT REMEDIATION, HOG INDUSTRY, LAGOONS, LANDFILLS, LIFT
STATIONS, MEDICAL MARIJUANA PRODUCERS, MRF’S, MUNICIPAL SOLID WASTE, POULTRY INDUSTRY, PRESS ROOMS, PULP-PAPER MILLS, PUMP STATIONS,
RENDERING PLANTS, SLUDGE THICKENERS, TRANSFER STATIONS, TRANSFER
VEHICLES, WASTE WATER TREATMENT, WET WELLS
ENVIRONMENTALLY RE
SP
ON
SIB
LE
SO
LU
TIO
NS
INDUSTRIES G O OdorGone®
INDUSTRIAL ODOR NEUTRALIZER
AirRecon /Raritan, NJ 08869-0130 Division of RECON SYSTEMS, Inc. SUMMARY The following results were obtained: (test methods: USEPA 1, 2, 3, 4, 11 and ASTM E-679) Run 5 Date 6/2/1994 Time 1448 – 1548 Scrubber Solution OdorGone Emissions Data – HYDROGEN SULFIDE
Scrubber Inlet pounds/ hour 0.28 ppmv (dry) 16 ppmv (wet) 15 Scrubber Outlet pounds/ hour <0.001 ppmv (dry) <0.08 ppmv (wet) <0.08
% Removal Efficiency pounds/ hour basis >99.6% Any sample remaining from this project will be retained for sixty days from the date of this report unless directed otherwise.
TO SAVE ON SHIPPING COST, STORAGE SPACE AND FOR SAFE HANDLING, OdorGone® IS
SHIPPED AS A 5 GALLON BULK-BLEND CONCENTRATE TO MAKE 55 GALLONS OF A READY
TO USE (RTU) INTERMEDIATE CONCENTRATE BEFORE CALCULATING DILUTION RATES. ONCE PRE-MIXED FROM BULK-BLEND TO (RTU) PRE-MIX, OdorGone® WILL REMAIN IN A
STABLE SOLUTION AND NEVER NEED TO BE STIRRED.
______________________________________________________________________________
(RTU) Pre-Mix Instructions
Add 5 Gallons OdorGone® BULK-BLEND to 50 Gallons of Water to make 55 Gallons OdorGone® INDUSTRIAL Odor Control… Ready to Use (RTU) Pre-Mix
__________________________________________________________________________________
DILUTION RATES From (RTU) Pre-Mix
Dilution rates and daily usage will vary based on odor intensity and the efficiency and run time of the odor control system. Location, (indoors or outdoors) weather conditions, nozzle placement, nozzle output, fog or mist particle size are all factors in determining dilutions. The optimum dilution rate is achieved when neither the odor nor the OdorGone® can be detected.
Atomizing Nozzles ( 100:1) to (5000:1) (high pressure/10-microns or less)
Foggers, Misters, Fans ( 10:1) to ( 600:1)
Scrubbers ( 300:1) to (5000:1)
Topical ( 4:1 ) to ( 600:1) _______________________________________________________________ _____________________________
OdorGone® “Performs Where Others Fail”
Phone 1- 800 - 930 - 9227
Web www.odorgone.com
ENVIRONMENTALLY RE
SP
ON
SIB
LE
SO
LU
TIO
NS
INDUSTRIES G O OdorGone®
INDUSTRIAL DILUTION RATES
All New OdorGone® Odor Control Systems include a complimentary (5) gallon container of OdorGone® READY TO USE Industrial Odor Neutralizer.
_____________________________________________________________________________
Thank you and congratulations on the purchase of your New High Quality OdorGone® Odor Control System. To get you started we include a complimentary 5-gal. container of OdorGone® READY TO USE Industrial Odor Neutralizer. OdorGone® Odor Neutralizers are specially developed for your new system to maintain the peak performance and long life you expect. To keep pump internals clean and running smooth and nozzles clog resistant so the infinite variety of noisome odors throughout your facility are continually neutralized at the highest dilution rates possible. OdorGone® also meets your demand for a safe, environmentally friendly product so environmental responsibility is not a question. To get started have your nozzles in place and system ready to run, insert the pick up tube from the injector directly into the 5-gal. container of OdorGone® READY TO USE and set the dilution rate on the injector. A good dilution to start is (1 to 400). The optimum dilution is attained when you no longer smell the odor or the OdorGone® OdorGone® is also available in a concentrate 5 gallon OdorGone® BULK-BLEND concentrate to make 55 gallons of READY TO USE. Please contact us with any questions or to re-order OdorGone® INDUSTRIAL Odor Control
OdorGone® BULK-BLEND … 5 gallons OG stock# 01025 OdorGone® READY TO USE … 5 gallons OG stock# 01005
Thank you, Peter G. Gans President
OdorGone® OG Industries, Inc.
OG Industries, Inc. * * Drexel Hill, PA 19082 [ Phone… 610-623-6747 USA… 800-930-9227 Fax… 610-623-7139 Web… www.odorgone.com
ENVIRONMENTALLY RE
SP
ON
SIB
LE
SO
LU
TIO
NS
INDUSTRIES G O
1
SAFETY DATA SHEET
OdorGone - 2018 Page 1
SECTION 1 - PRODUCT AND COMPANY IDENTIFICATION
Product Name: OdorGone® OG Industries, Inc.
INDUSTRIAL (BULK-BLEND) P.O. BOX 1286
Havertown, PA. 19083
USA
For information or emergencies call: (1-610-623-6747)… In USA: (1-800-930-9227)… e-mail: ([email protected])
Issued Date: January 1, 2018
SECTION 2 - HAZARDS IDENTIFICATION
SECTION 3 - COMPOSITION / INFORMATION ON INGREDIENTS
Hazardous Ingredients: NONE. The specific identities of the ingredients of this mixture are considered by OG Industries, Inc. to be TRADE
SECRETS, and are withheld in Accordance with the provisions of paragraph 1910.1200 of the Title 29 of the Code of Federal Regulations.
SECTION 4 - FIRST AID MEASURES
Emergency and First Aid Procedures: N/A in normal operation.
Inhalation: None
Eye Contact: Flush immediately with clean water for at least 15 minutes. Contact a physician if irritation persists.
Skin Contact: Flush with fresh water
Ingestion: Give milk or water, induce vomiting. Get medical attention immediately or call emergency medical center. Never give anything by mouth
to an unconscious person. Get medical attention immediately.
SECTION 5 - FIRE FIGHTING MEASURES
Flash Point: None (TCC) Flammable Limits: *N/A
Extinguishing Media: Carbon Dioxide, dry chemical or Foam.
Special Fire Fighting Procedures: None.
Unusual Fire and Explosion Hazards: None known to OG Industries, Inc.
SECTION 6 - ACCIDENTAL RELEASE MEASURES
Steps to be taken if Material is Released or Spilled: Flush small amounts into drain. Collect and return large amounts to container.
SECTION 7 - HANDLING AND STORAGE
Handling and Storage precautions: Store in a cool, dry area. Keep containers tightly closed and upright when not in use. If frozen, thaw and mix to
make usable. Other Precautions: DOT Class not required. Good manufacturing practices dictate that an eyewash fountain and/or safety shower
should be available in the work area.
SECTION 8 - EXPOSURE CONTROLS
Do not eat, drink or
Do not use for personal hygiene.
Incidental skin contact is not harmful
Respiratory Protection: None
Allergy / Asthma: None Known…If you have a condition please take all necessary precautions to ensure your safety. Ventilation: None
Protective Gloves: None
Eye Protection: N/A in normal operation. Safety glasses when handling.
Other Protective Clothing or Equipment: None
Work/Hygienic Practices: N/A
May be a slight irritant
to eyes and sensitive skin
2
SAFETY DATA SHEET
OdorGone - 2018 Page 2
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
Boiling Point: 212°F@ mm Hg Vapor Pressure: 17.7
Melting Point: *N/A°C Vapor Density: N/A
Specific Gravity: 1.0 VOC: None
Solubility in water: 100% Evaporation Rate: (Butyl Acetate = 1) <1
pH: 6.5 Appearance and Odor: Opaque Liquid / Fresh Natural Scent
SECTION 10 - STABILITY AND REACTIVITY
This product presents no significant reactivity hazard. It is stable and will not react violently with water. Hazardous polymerization will not occur.
Avoid contact or contamination with oxidizing agents .
SECTION 11 - TOXICOLOGICAL INFORMATION
Eye Effects Moderately irritating.
Skin Effects Irritation: May be slightly irritating to sensitive skin.
SECTION 12 - ECOLOGICAL INFORMATION
Biodegradable: Yes Non-Toxic: Yes USDA: C-1
Plants: No effect on plants known to OG Industries, Inc with normal use.
Animals: Avoid eye contact. Do not let them eat or drink
SECTION 13 - DISPOSAL CONSIDERATIONS
Waste Disposal Methods:, Triple rinse and recycle.
SECTION 14 - TRANSPORTATION INFORMATION
UN NUMBER: Not applicable: Non-Hazardous
SHIPPING NAME: Not applicable: Non-Hazardous
TRANSPORT HAZARD CLASS: Not applicable: Non-Hazardous
PACKING GROUP NUMBER: Not applicable: Non-Hazardous
EMERGENCY RESPONSE GUIDE NUMBER: Not applicable: Non-Hazardous
ENVIRONMENTAL HAZARDS: None
IATA REGULATIONS: Not classified hazardous by IATA or IMO regulations: Non-Hazardous
SPECIAL PRECAUTIONS: None
TRANSPORT IN BULK: Not applicable: Non-Hazardous
CLASS: 55
SCHEDULE B: 3301195160
SECTION 15 - REGULATORY INFORMATION
OdorGone does not contain any substance included in the following lists of toxic chemicals and wastes:
OSHA, 29 CFR 1910.1200
TSCA There is no required reporting or other compliance required by TSCA Section 8
Canadian DSL
EINECS. RCRA List (40 CFR 261, Subparts C & D).
SARA 313 List (40 CFR 372.65) and percentages
California Proposition 65 List
DOT List (49 CFR 172.101 Appendix) and Reportable quantities
EPCRA Section 302
NEW JERSEY RIGHT-TO-KNOW: (Trade Secret Registration Number)...NJTSRN-09609
SECTION 16 - OTHER INFORMATION
The information in this SDS was obtained from current and reliable sources. However, the data is provided without any warranty, expressed or
implied, regarding its correctness or accuracy. Since the conditions for use, handling, storage and disposal of the product are beyond OG Industries,
Inc. control; it is the user’s responsibility both to determine safe conditions for use of this product and to assume liability for loss, damage or expense
arising out of the product’s improper use. No warranty, expressed or implied regarding the product described herein shall be created by or inferred
from any statement or omission in this SDS. Various Government agencies (e.g. DOT, EPA, FDA) may have Specific regulations concerning the
transportation, handling, storage, use or disposal of this product which may not be reflected in this SDS. The user should review those regulations to
ensure full compliance.
1
SAFETY DATA SHEET
OdorGone - 2018 Page 1
SECTION 1 - PRODUCT AND COMPANY IDENTIFICATION
Product Name: OdorGone® OG Industries, Inc.
INDUSTRIAL (READY TO USE) P.O. BOX 1286
Havertown, PA. 19083
USA
For information or emergencies call: (1-610-623-6747)… In USA: (1-800-930-9227)… e-mail: ([email protected])
Issued Date: January 1, 2018
SECTION 2 - HAZARDS IDENTIFICATION
SECTION 3 - COMPOSITION / INFORMATION ON INGREDIENTS
Hazardous Ingredients: NONE. The specific identities of the ingredients of this mixture are considered by OG Industries, Inc. to be TRADE
SECRETS, and are withheld in Accordance with the provisions of paragraph 1910.1200 of the Title 29 of the Code of Federal Regulations.
SECTION 4 - FIRST AID MEASURES
Emergency and First Aid Procedures: N/A in normal operation.
Inhalation: None
Eye Contact: Flush immediately with clean water for at least 15 minutes. Contact a physician if irritation persists.
Skin Contact: Flush with fresh water
Ingestion: Give milk or water, induce vomiting. Get medical attention immediately or call emergency medical center. Never give anything by mouth
to an unconscious person. Get medical attention immediately.
SECTION 5 - FIRE FIGHTING MEASURES
Flash Point: None (TCC) Flammable Limits: *N/A
Extinguishing Media: Carbon Dioxide, dry chemical or Foam.
Special Fire Fighting Procedures: None.
Unusual Fire and Explosion Hazards: None known to OG Industries, Inc.
SECTION 6 - ACCIDENTAL RELEASE MEASURES
Steps to be taken if Material is Released or Spilled: Flush small amounts into drain. Collect and return large amounts to container.
SECTION 7 - HANDLING AND STORAGE
Handling and Storage precautions: Store in a cool, dry area. Keep containers tightly closed and upright when not in use. If frozen, thaw and mix to
make usable. Other Precautions: DOT Class not required. Good manufacturing practices dictate that an eyewash fountain and/or safety shower
should be available in the work area.
SECTION 8 - EXPOSURE CONTROLS
Do not eat, drink or
Do not use for personal hygiene.
Incidental skin contact is not harmful
Respiratory Protection: None
Allergy / Asthma: None Known…If you have a condition please take all necessary precautions to ensure your safety. Ventilation: None
Protective Gloves: None
Eye Protection: N/A in normal operation. Safety glasses when handling.
Other Protective Clothing or Equipment: None
Work/Hygienic Practices: N/A
May be a slight irritant
to eyes and sensitive skin
2
SAFETY DATA SHEET
OdorGone - 2018 Page 2
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
Boiling Point: 212°F@ mm Hg Vapor Pressure: 17.7
Melting Point: *N/A°C Vapor Density: N/A
Specific Gravity: 1.0 VOC: None
Solubility in water: 100% Evaporation Rate: (Butyl Acetate = 1) <1
pH: 6.5 Appearance and Odor: Clear To Opaque Liquid / Fresh Natural Scent
SECTION 10 - STABILITY AND REACTIVITY
This product presents no significant reactivity hazard. It is stable and will not react violently with water. Hazardous polymerization will not occur.
Avoid contact or contamination with oxidizing agents .
SECTION 11 - TOXICOLOGICAL INFORMATION
Eye Effects Moderately irritating
Skin Effects Irritation: May be slightly irritating to sensitive skin
Sensitization: Positive
SECTION 12 - ECOLOGICAL INFORMATION
Biodegradable Yes
Non-Toxic Yes USDA C-1
Plants No effect on plants known to OG Industries, Inc with normal use
Animals Avoid eye contact. Do not let them eat or drink
SECTION 13 - DISPOSAL CONSIDERATIONS
Waste Disposal Methods:, Triple rinse and recycle.
SECTION 14 - TRANSPORTATION INFORMATION
May be shipped normally as a non-hazardous material there are no hazardous restrictions.
Class 55 Schedule B 3301195160
SECTION 15 - REGULATORY INFORMATION
OdorGone does not contain any substance included in the following lists of toxic chemicals and wastes:
OSHA, 29 CFR 1910.1200
TSCA There is no required reporting or other compliance required by TSCA Section 8
Canadian DSL
EINECS. RCRA List (40 CFR 261, Subparts C & D).
SARA 313 List (40 CFR 372.65) and percentages
California Proposition 65 List
DOT List (49 CFR 172.101 Appendix) and Reportable quantities
EPCRA Section 302
NEW JERSEY RIGHT-TO-KNOW: (Trade Secret Registration Number)...NJTSRN-09609
SECTION 16 - OTHER INFORMATION
The information in this SDS was obtained from current and reliable sources. However, the data is provided without any warranty, expressed or
implied, regarding its correctness or accuracy. Since the conditions for use, handling, storage and disposal of the product are beyond OG Industries,
Inc. control; it is the user’s responsibility both to determine safe conditions for use of this product and to assume liability for loss, damage or expense
arising out of the product’s improper use. No warranty, expressed or implied regarding the product described herein shall be created by or inferred
from any statement or omission in this SDS. Various Government agencies (e.g. DOT, EPA, FDA) may have Specific regulations concerning the
transportation, handling, storage, use or disposal of this product which may not be reflected in this SDS. The user should review those regulations to
ensure full compliance.
“OdorGone® Performs Where Others Fail”
Proudly Made in America
OdorGone® Industrial Odor Control Systems
ALL COMPLETE PACKAGE SYSTEMS INCLUDE A COMPLEMENTARY
5 - Gallons OdorGone® Ready To Use (RTU)
SYSTEM #
Materials in each kit
OG 40 BIGHORN I Pump unit 110 volt, with chemical injector, 40’0” flex line with nozzles at 5’0” centers, 40’0” flexible manifold, spare nozzles, fittings and a complementary 5 - Gallon OdorGone (RTU)
OG 80 BIGHORN I Pump unit 110 volt, with chemical injector, 80’0” flex line with nozzles at 5’0” centers, 40’0” flexible manifold, spare nozzles, fittings and a complementary 5 - Gallon OdorGone (RTU)
OG 120
BIGHORN I Pump unit 110 volt, with chemical injector, 120’0” flex line with nozzles at 5’0” centers, 60’0” flexible manifold, spare nozzles, fittings and a complementary 5 - Gallon OdorGone (RTU)
OG 160
BIGHORN I Pump unit 110volt, with chemical injector, 160’0” flex line with nozzles at 5’0” centers, 60’0” flexible manifold, center tee, spare nozzles, fittings and a complementary 5 - Gallon OdorGone (RTU)
OG 200
BIGHORN II Pump unit 220volt, with chemical injector, 200’0” flex line with nozzles at 5’0” centers, 100’0” flexible manifold, center tee, 2 x manifold valves, spare nozzles, fittings and a complementary 5 - Gallon OdorGone (RTU)
OG 240
BIGHORN II Pump unit 220volt, with chemical injector, 240’0” flex line with nozzles at 5’0” centers, 100’0” flexible manifold, center tee, 2 x manifold valves, spare nozzles, fittings and a complementary 5 - Gallon OdorGone (RTU)
OdorGone delivery systems use the highest-quality, industrial grade equipment and high pressure fittings. Each system comes complete with installation tools, connection and maintenance tools, full operation and service manual and a complementary 5 - Gallon OdorGone (RTU) Optional stainless steel support wire available.
BIGHORN Pumps are available in 3 models from 4 – 80 nozzles. Complete with a pressure driven variable speed drive (to control motor speed based on the number of nozzles) remote control connection and separate switched isolator.
HIGH PRESSURE BIGHORN II SERIES PUMP MODULES
NEW….all pumps complete with auto speed control (PID loop) OGBGH0501 BIGHORN 5 pump unit 110 volt 1ph 60 Hz from 2 - 20 Nozzles
OGBGH0001 BIGHORN I pump unit 110 volt 1ph 60 Hz from 4 - 40 Nozzles
OGBGH0002 BIGHORN II pump unit 220 volt 1ph 60 Hz from 5 - 80 Nozzles
OGPFU1010 Extra 10" filter pack for BIGHORN II series
OGIHK0001 BIGHORN Inlet Hose Kit (connects to water supply)
January 14, 2013 OdorGone Industrial OdorControl and Delivery Systems-2013 Page 11 of 18
Photographs and designs are not necessarily of the exact equipment supplied
“OdorGone® Performs Where Others Fail”
Proudly Made in America
IBEX Pump Range covers flow rates from 0.50gpm up to 11.00gpm (2 – 42 lpm). Standard features include: Pressure driven Variable Speed Drive, twin inlets gauges, “Drain Control” twin filters, powder coated frame. See data sheet for more details .
HIGH PRESSURE IBEX SERIES PUMP MODULES
OGIBX2208 IBEX 2 230 volt 1ph unit 50/60Hz 0.25-2.00 GPM Small Frame
OGIBX2480 IBEX 2 480 volt 3ph unit 50/60Hz 0.25-2.00 GPM Small Frame
OGIBX3230 IBEX 3 230 volt 1ph unit 50/60Hz 0.25-3.00 GPM Small Frame
OGIBX3480 IBEX 3 480 volt 3ph unit 50/60Hz 0.25-3.00 GPM Small Frame
OGIBX4231 IBEX 4 230 volt 1ph unit 50/60Hz 0.50-4.00 GPM Small Frame
OGIBX4230 IBEX 4 480 volt 3ph unit 50/60Hz 0.50-4.00 GPM Small Frame
ADD ON COMPONENTS FOR PUMP SYSTEMS
OGREG0006 Pressure Regulator 3/8" Ports Max 2 USGPM per min
OGREG0007 Pressure Regulator 3/8" Ports Max 6 USGPM per min
SECTIONING CONTROLLERS
OGSCT1012 Sectioning Controller 120 VAC 50/60 HZ
OGSCT1022 Sectioning Controller 240VAC 50/60 HZ
PUMP AND SYSTEM MODULE SPARE PARTS KIT
OGASK0001 System Spare Parts Kit
ASSEMBLY & INSTALLATION TOOLS
OGTKT0003 Aircraft Cable Tool Kit
OGTKT0004 General Assembly Tool Kit
OGVTT0001 Hose Cutter
OGVTT0002 Nozzle Orientation Tool
OGTKT0002 Nozzle Cleaning Tool
OGVTW0001 Extra 0.007" Wire For Cleaning Tool
OGFTF8520 Teflon Thread Tape
OGVTN0001 5/16" Nut Driver
OGVTV0001 5" Vise Grip Pliers
OGVTB0001 Wire Brush
OGVTE0002 Nozzle Thread Extractor
OGVTT0003 Nozzle Thread Tap
OGVSL0001 Silicone Spray (not for air shipment)
January 14, 2013 OdorGone Industrial OdorControl and Delivery Systems-2013 Page 12 of 18
Photographs and designs are not necessarily of the exact equipment supplied
“OdorGone® Performs Where Others Fail”
Proudly Made in America
FLEXIBLE ATOMIZATION LINES
STANDARD SPACING
OGLMA8150 1.50MT (60") spacing with 0.008" brass nozzles and anti-drip
REUSABLE HOSE FITTINGS
OGLFM0004 1/4" (6mm) Male re-usable hose fitting - Brass
OGLFF0004 1/4" (6mm) Female re-usable hose fitting rigid Brass
OGLFS0004 1/4" (6mm)Female Swivel re-usable fitting Brass
OGLFM0006 3/8" (9mm) Male re-usable hose fitting - Brass
OGLFS0006 3/8" (9mm) Female Swivel re-usable hose - Brass
OGLFM0008 1/2" (12mm) Male re-usable hose fitting - Brass
OGLFS0008 1/2" (12mm) Female Swivel re-usable hose - Brass
MANIFOLD, PUSH LOCK DRAIN HOSE KITS & QUICK DISCONNECTS.
OGAHH0004 1/4" (6mm) High Pressure Manifold Hose
OGAHH0006 3/8" (9mm) High Pressure Manifold Hose
OGAHH0008 1/2" (12mm) High Pressure Manifold Hose
OGAHH0012 3/4" (16mm) High Pressure Manifold Hose
OGPHL0004 1/4" (6mm) Low Pressure Drain Hose - Blue
OGPHL0006 3/8" (9mm) Low Pressure Drain Hose - Blue fits LDV0001
OGJGT0061 3/8" (9mm) Blue Poly Drain hose - fits new style drain kit LDV1006
OGPHL0008 1/2" (12mm)Low Pressure Push-Lock-black
OGPHL0012 3/4" (9mm) Low Pressure Push-Lock-black
MANIFOLD KITS
ALL manifold kits include stainless steel high-pressure ball valves
OGLMK0404 1/4" X 1/4" (6mm X 6mm) Manifold Kit Assembly
OGLMK0604 3/8" X 1/4" (9mm X 6mm) Manifold Kit Assembly
OGLMK0804 1/2" X 1/4" (12mm X 6mm) Manifold Kit Assembly
OGLMK0806 1/2" X 3/8" (12mm X 9mm) Manifold kit Assembly
OGLMK0606 3/8" X 3/8" (9mm X 9mm) Manifold Kit Assembly
OGLMK2804 1/2" X 1/4" (12mm X 6mm) Double Manifold kit Assay
OGLMK2604 3/8" X 1/4" (9mm X 6mm) Double Manifold Kit Assay
OGLQS0004 1/4" (6mm) QD Assembly (with 2 each 1/4" (6mm) Male RHF) OGLQS0006
3/8" (9mm) QD Assembly (with 2 each 3/8" (9mm) Male RHF)
January 14, 2013 OdorGone Industrial OdorControl and Delivery Systems-2013 Page 13 of 18
Photographs and designs are not necessarily of the exact equipment supplied
“OdorGone® Performs Where Others Fail”
Proudly Made in America
SUSPENSION MATERIALS
OGLAC0002 Aircraft Cable 1/16" SS (with 1 each zip tie per foot)
OGAAC0116 Aircraft Craft 1/16" SS (cable only per foot)
OGACS0116 Aircraft Crimp Sleeves
OGLCT0001 Cable Tightening Unit (ratchet, 10ft (3mt) cable 6 sleeves OGAHC1006 Beam Clamps (3/8" Beam)
OGAHC1012 Beam Clamps (3/4" Beam)
OGACT0009 7 1/2" (20cm) Zip Tie (Black)
OGLHC0004 1/4" (6mm) Hose Mounting Clamps (screw and anchor)
OGLHC0006 3/8" (9mm) Hose Mounting Clamps (screw and anchor)
OGLHC0008 1/2" (12mm) Hose Mounting Clamps (screw and anchor)
OGLHC0002 3/8" (9mm) Hose Mounting Clamps for Alumawood
NOZZLES, PLUGS, AUTO DRAIN VALVES
Brass Nozzles with Antidrip Valves
OGLNA0001 Nozzle - MC Brass .008" / 0.20mm with anti-drip
OGLNA0002 Nozzle - MC Brass .020" / 0.50mm with anti-drip
Brass Nozzles No Anti-drip Valves
OGLNA0003 Nozzle - MC Brass .008" / 0.20mm without anti-drip
OGLNA0004 Nozzle - MC Brass .020" / 0.50mm without anti-drip
Nozzle Plugs
OGLNP0001 Nozzle Plug Brass
Drain Valves
OGLDV0604 Automatic Drain Valve 3/8" female inlet-1/4" male outlet NEW!!
OGLDV1006 Automatic Drain Valve 3/8" kit with outlet hose connector
Pressure psi 800 900 1000 1100 1200 Nozzle Orifice USGPM – lb/hr USGPM – lb/hr USGPM – lb/hr USGPM – lb/hr USGPM – lb/hr
0.005” 0.014 – 7.0 0.015 – 7.5 0.017 – 8.5 0.018 – 9.00 1.019 – 9.5
0.008” 0.020 – 10.0 0.023 – 11.5 0.024 – 12.0 0.025 – 12.5 0.026 – 13.0
0.020” 0.065 – 32.5 0.070 – 35.0 0.076 – 38.0 0.080 – 40.0 0.085 – 42.0
Pressure Bar 55 62 69 76 83
Nozzle Orifice Lpm – kg/hr Lpm – kg/hr Lpm – kg/hr Lpm – kg/hr Lpm – kg/hr
0.12mm 0.053 – 3.2 0.057 – 3.4 0.064 – 3.8 0.066 – 4.0 0.072 – 4.3
0.20mm 0.083 – 5.0 0.087 – 5.2 0.091 – 5.5 0.095 – 5.7 0.102 – 6.1
0.50mm 0.246 – 14.8 0.265 – 15.9 0.288 – 17.3 0.303 – 18.2 0.318 – 19.1
Full specifications available on request Note: all flow rates shown are nominal.0.005” / 0.12mm nozzles should only be used with pure reverse osmosis water.* refers to 0.008” / 0.12mm nozzles.
January 14, 2013 OdorGone Industrial OdorControl and Delivery Systems-2013 Page 14 of 18
Photographs and designs are not necessarily of the exact equipment supplied
“OdorGone® Performs Where Others Fail”
Proudly Made in America
NOZZLE CLUSTER
OGLNC0002 5 nozzle SS Cluster no nozzles
ROC nozzle cluster - 5 nozzles, 12"/300mm riser + 1/4" M connection
OGLNC0004 Nozzle Cluster - Complete Fixture 1 ft (300mm) tube, RHF 6 Brass Nozzles
OGLNC1003 Nozzle Cluster - Complete Fixture 1 ft (300mm) tube, RHF 3 Brass Nozzles
OGLNC0005 Nozzle Cluster - Complete Fixture 1 ft (300mm) tube, RHF 3 SS Nozzles
WATER FILTRATION
OGPFC0005 5" 5 Micron Filter Cartridge - LD Pump and BIGHORN pumps
OGPFC1001 10" 1 Micron Filter Cartridge
OGPFC1005 10" 5 Micron Filter Cartridge
OGPFC1010 10" 10 Micron Filter Cartridge
OGPFR0001 10" Filter Housing O-ring
OGVTF0002 10" Filter Wrench
OGPFC2001 20" 1 Micron Filter Cartridge
OGPFC2005 20" 5 Micron Filter Cartridge
OGPFC2010 20" 10 Micron Filter Cartridge
OGPCL0002 Pump Oil - 1 Qt (0.95lt) - 90w Synthetic
OGPCL0001 Pump Oil - 1 Qt (0.95lt) - 15w-50 Synthetic
INJECTOR AND DOSING EQUIPMENT
OGCCI9020 Chemical Injector 2% 0.1-2.5gpm 1:200 - 1:50
OGCCI9050 Chemical Injector 5% 0.1-2.5gpm 1:50 - 1:20
OGCCR9001 Remote Injector for Odor Chemical MicroDOS
OGCCI8050 Chemical Injector 5% 2.5-12gpm 1:500 - 1:99
OGCCI8010 Chemical Injector 1% 2.5-12gpm 1:500 - 1:100
OGCCI8004 Chemical Injector 0.4% 2.5-12gpm 1:4,000 - 1:250
OGCCR8001 Remote Injector for Odor Chemical MiniDOS
OGPPM0001 Chemical Metering Pump - Electrical - 120VAC 50-/60Hz - Injector Only
OGPPM0002 Chemical Metering Pump - Electrical - 230VAC 50-/60Hz - Injector Only
January 14, 2013 OdorGone Industrial OdorControl and Delivery Systems-2013 Page 15 of 18
Photographs and designs are not necessarily of the exact equipment supplied
“OdorGone® Performs Where Others Fail”
Proudly Made in America
BRASS FITTINGS
BALL VALVES -STAINLESS STEEL
OGFBB9004 1/4" Ball Valve
OGFBB9006 3/8" Ball Valve
OGFBB9008 1/2" Ball Valve
QUICK DISCONNECTS
OGFQF0004 1/4" Female Quick Disconnect
OGFQF0006 3/8" Female Quick Disconnect
OGFQM0004 1/4" Male Quick Disconnect
OGFQM0006 3/8" Male Quick Disconnect
PLUGS
OGFPH0004 1/4" Hex Plug
OGFPH0006 3/8" Hex Plug
OGFPH0008 1/2" Hex Plug
PUSH LOCK FITTINGS
OGFPL0408 1/4" Thread X 1/2" Push lock
OGFPL0608 3/8" Thread X 1/2" Push lock
OGFPL0808 1/2" Thread X 1/2" Push lock
OGFPL1208 1/2" Thread X 3/4" Push lock
PUSH LOCK ELBOW FITTINGS
OGFPL9008 1/2" Thread X 1/2" Push lock elbow
HEX NIPPLES
OGFNH0404 1/4" Hex Nipple
OGFNH0606 3/8" Hex Nipple
OGFNH0808 1/2" Hex Nipple
REDUCING NIPPLES
OGFNR0604 3/8" X 1/4" Reducing Nipple
OGFNR0804 1/2" X 1/4" Reducing Nipple
OGFNR0806 1/2" X 3/8" Reducing Nipple
MALE ELBOWS
OGFEM9004 1/4" Male Elbow
OGFEM9006 3/8" Male Elbow
OGFEM0604 3/8" x 1/4" Male Elbow
OGFEM9008 1/2" Male Elbow
January 14, 2013 OdorGone Industrial OdorControl and Delivery Systems-2013 Page 16 of 18
Photographs and designs are not necessarily of the exact equipment supplied
“OdorGone® Performs Where Others Fail”
Proudly Made in America
STREET ELBOW
OGFES9004 1/4" Street Elbow M/F
OGFES9006 3/8" Street Elbow M/F
OGFES9008 1/2" Street Elbow
FEMALE ELBOWS
OGFEF9004 1/4" Female Elbow
OGFEF9006 3/8" Female Elbow
STREET TEES OGFTS0002 1/8" Street Tee Male / Fem / Fem
OGFTS0004 1/4" Street Tee Male / Fem / Fem
OGFTS0006 3/8" Street Tee Male / Fem / Fem
OGFTS0008 1/2" Street Tee Male / Fem / Fem
BRANCH TEES
OGFTB0004 1/4" Branch Tee Fem / Male / Fem
OGFTB0006 3/8" Branch Tee Fem / Male / Fem
OGFTB0008 1/2" Branch Tee Fem / Male / Fem
FEMALE TEES
OGFTF0004 1/4" Female Tee
OGFTF0006 3/8" Female Tee
OGFTF0008 1/2" Female Tee
MALE TEES
OGFTM0004 1/4" Male Tee
OGFTM0006 3/8" Male Tee
BUSHINGS
OGFBH0402 1/4"X1/8" Bushing Male / Fem
OGFBH0602 3/8"X1/8" Bushing Male / Fem
OGFBH0604 3/8"X1/4" Bushing Male / Fem
OGFBH0804 1/2"X1/4" Bushing Male / Fem
OGFBH0806 1/2"X3/8" Bushing Male / Fem
COUPLINGS
OGFCP0004 1/4" Coupling (F/F)
OGFCP0006 3/8" Coupling (F/F)
OGFCP0604 3/8" x 1/4" Coupling (F/F)
OGFCP0804 1/2" x 1/4" Coupling (F/F)
OGFCP1208 3/4" x 1/2" Coupling (F/F)
January 14, 2013 OdorGone Industrial OdorControl and Delivery Systems-2013 Page 17 of 18
Photographs and designs are not necessarily of the exact equipment supplied
“OdorGone® Performs Where Others Fail”
Proudly Made in America
January 14, 2013 OdorGone Industrial OdorControl and Delivery Systems-2013 Page 18 of 18
Photographs and designs are not necessarily of the exact equipment supplied
WARRANTY
Products manufactured by MicroCool for OG Industries, Inc. bear the following limited warranty: The seller warrants that the goods to be delivered will be of the kind and quality described in the order or contract and will be free of defects in workmanship or material. Should any failure to conform to this warranty appear within ONE (1) year after the initial date of delivery, the seller shall, upon notification thereof and substantiation that the goods have been stored, installed, maintained and operated in accordance with the seller's recommendations and standard industry practice, correct such defect by suitable repair or replacement at its own expense. This warranty is limited to repairing or replacing products that the manufacturer's investigation shows were defective at the time of shipment by the manufacturer. An RMA number must be obtained from OG Industries, Inc. before returning a product for warranty consideration or repair. All products subject to this warranty shall be returned for examination, repair or replacement, freight pre-paid to…Call for RMA number and shipping instructions.
OG INDUSTRIES, INC.
Web site- www.odorgone.com Email- [email protected]
Phone - +1-610-623-6747 USA - +1-800-930-9227 Fax - +1-610-623-7139
This warranty is exclusive and is in lieu of any warranty or merchant ability, fitness for a particular purpose or other warranty of quality, whether express or implied, except of title and against patent infringement. Correction of non-conformities, in the manner and for the period of time provided above, shall constitute fulfillment of all liabilities of the seller to the purchaser with respect to, or arising out of the goods, whether based on contract negligence, strict tort or otherwise. LIMITATION OF LIABILITY - Repair or replacement of defective products as provided above is the sole and exclusive remedy provided hereunder and the seller shall not under any circumstances be liable for special or con-sequential damages such as, but not limited to, damage or loss of other property or equipment, loss of profits, or revenue, cost of capital, cost of purchased or replacement goods, or claims or customers of purchaser for service interruptions. The remedies of the purchaser set forth are exclusive and the liability of seller with respect to any contract, or anything done in connection therewith such as the performance or breach thereof, or from the manufacture, sale, delivery, resale, installation or use of any goods covered by or furnished under this contract whether arising out of contract, negligence, strict tort, or under any warranty, or otherwise, shall not, except as expressly provided herein, exceed the price of the goods upon which such liabilities based. This is the only warranty on any MicroCool or OG Industries, Inc. product; no other writing or description in the literature shall be construed as a warranty. Products manufactured by other than MicroCool or OG Industries, Inc. bear the following limited warranty: Seller warrants that the goods manufactured by others will conform to the description herein stated. No other warranty express or implied is made, and warranty of the manufacturer is hereby assigned and transferred to the buyer. Furthermore, except for the manufacturer's warranty, if any, the products sold hereunder are sold as is. MicroCool or OG Industries, Inc. is not liable for any incidental or consequential damages in connection with these products. In addition to all of the above, MicroCool or OG Industries, Inc. accepts no liability if the system is used to dis-pense corrosive, toxic or other non approved agents. MicroCool or OG Industries, Inc. will not be responsible for poor water quality damage or nozzle blockage due to poor water quality.
OdorGone® Drum-Top Atomizing Unit
OdorGone Drum-Top Atomizing Fogger is an industrial quality, totally self-contained ULV (ultra low volume) fogging unit that siphons OdorGone from any source to neutralize odors at indoor or outdoor problem areas.
Our quiet, built-in compressor and air-atomizing fog nozzle produce excellent atomization to disperse a fine, non wetting fog into open air, rooms, corridors, ducts or outdoors without wetting the floor and wasting your money!
OdorGone Drum-Top Atomizing Fogger is designed for long life. Our white powder coated aluminum fogger is capable of uniform atomization with an adjustable flow nozzle that will operate on/off all day using the optional, electronic intermittent-timer. Rated for over 15,000 continuous hours…
Neutralizes odors anywhere a compact fogger is needed. In waste-water treatment buildings, trash transfer sites, compactor rooms, waste docks and, ventilation ducts. Single or duel nozzle units using quiet compressed air to atomize OdorGone in a low-cost, highly effective fog to neutralize odors in your problem areas…
Specifications:
Part Number OGDTFSP3
Flow rate: 0.1 to 0.5 GPH (gallon per hour) or 0.3 to 1.8 LPH (liter per hour)
Rating 15,000 hours continuous operation.
Electrical: 115vac /60Hz 3 to 5 amps.
Timer: Electronic repeat cycle intermittent timer.
Dimensions: 15.5 inches (39.3cm) wide X 7.125 deep (18cm) X 10.438 (26.5cm) - 17 pounds (7.7kg)
Frame: White powder coated aluminum on rubber feet for drum top, shelf or wall mountable.
Warrantee One Year (Limited)
OdorGone® ENVIRONMENTALLY RE
SP
ON
SIB
LE
SOL
UT
ION
S INDUSTRIES
GO “Performs where others fail”
Phone 1- 800 - 930 - 9227
Web www.odorgone.com
Proudly Made in America