Order On-line at: www.hittite.com2 Elizabeth Drive • Chelmsford, MA 01824 • 978-250-3343 tel • 978-250-3373 fax

Analog, Digital & Mixed-Signal ICs, Modules, Subsystems & Instrumentation

OFF-THE-SHELF JunE 2012

Hittite Clock ICs Improve Data Converter Performance!Industry Leading Jitter & Phase Noise

Hittite’s unique line of high performance clock distribution & generation solutions enable system designers to maximize data converter performance. The HMC1031MS8E, HMC1032LP6GE, HMC1033LP6GE, HMC1034LP6GE & HMC1035LP6GE are SMT packaged clock generators, ideal for a wide range of high performance cellular/4G

infrastructure, fiber optic & networking applications. They deliver best-in-class phase noise and jitter plus industry-leading rise and fall time. The new HMC1033LP6GE and HMC1035LP6GE are 3.3 Volt high performance clock generators that provide programmable frequencies with less than 120 fs jitter, ideal for providing sample clocks for high speed ADCs & DACs. The HMC988LP3E and HMC987LP5E clock

ADC

HMC5850BG Low DC Power 40G/100G Modulator Driver for Long-Haul Applications!Industry’s Lowest Power Consumption (1W) for 8Vp-p Output!

Hittite has released the industry’s lowest power and smallest form factor SMT packaged optical modulator driver, which operates from DC to 30 GHz, and is designed for 40 Gbps and 100 Gbps Mach-Zehnder optical modulator driver applications.

As the demand for bandwidth increases due to service providers, data centers, and enterprise networks, power efficient, small form factor, and cost effective 100 Gbps optical solutions are required for wide adoption in Metro, Regional and Long Haul applications. Power dissipation and form factor are two key parameters directly impacting the face plate density and system cost. Next generation 100G optical dense wavelength division multiplexing (DWDM) networks will benefit from the HMC5850BG which consumes 35% less power and is 40% smaller than competing solutions, with no compromise in performance.

New Transceiver Product Line Supports WiGig & IEEE 802.11ad!Highly Integrated IC Solution for Low Cost 60 GHz Radio Applications!

Hittite has launched a new, highly integrated transceiver chipset, which targets 60 GHz applications such as metrocell/picocell backhaul, WiGig (IEEE 802.11ad) and wireless sensors. WiGig applications include wireless cable replacement (HDMI, USB 3.0, and DisplayPort), wireless docking stations and video/magazine kiosks. The HMC6000 & HMC6001 chipset not only solves many of the key technical challenges

encountered at millimeterwave frequencies, but also enables turnkey multi-Gbps communication links at 60 GHz. Low frequency baseband signals are directly translated to and from 60 GHz, minimizing the need for expensive or complex millimeterwave interconnection components on the printed circuit board.

The HMC6000 transmitter IC can translate analog baseband in-phase (I) and quadrature (Q) signals to a selected channel in the 60 GHz band, requiring only an external crystal oscillator. The HMC6000 is fabricated with silicon-germanium (SiGe) BiCMOS semiconductor process technology. It provides differential analog I and Q input ports with DC coupling to enable cancellation of DC offsets and carrier feedthrough. The HMC6000 transmitter IC includes a low phase noise frequency synthesizer for

(Continued on page 11)

Dual Channel Downconverter Solutions for Infrastructure

HMC990LP4E

•Wideband:0.7to3.5GHz •HighInputIP3of+25dBm •PowerConversionGainof7dB

See Page 8

Digital Converter Solutions

HMCAD1104

•65MSPSMax.SamplingRate •UltraLowPowerDissipation •61.6dBSNRat8MHzFin

See Page 6

DC Power Management Solutions for Test Instrumentation

HMC980

•On-ChipNegativeVoltage Generator (NVG) •AdjustableDelayCurrent:1.6A •SupplyVoltage:5Vto16.5V

See Page 9

(Continued on page 10)

Hittite Exhibiting at MTT-S 2012!

New FeaturedProducts!25

(Continued on page 10)

View our product demos in Montreal, June19to21,2012.

Booth #1701

HMC9000 Multi-GHz Quantizer

JUNE 20122

Off

-Th

e-S

he

lf

New Products by Market Application

New Broadband High IP3 Dual Channel Downconverter Ideal for Cellular InfrastructureSee Page 8 for details.

HMC990LP4E

Broad

band

Cel

lula

r In

fras

truc

ture

Fibe

rOptic

&

Net

wor

king

Microwav

e&m

mWav

eM

ilita

ry

Spa

ce

Test

&

Mea

sure

men

t

Autom

otive

Part Number FunctionFrequency

(GHz)Page

Number

Amplifiers

HMC1014 0.5W Medium Power Amplifier 33.5 to 46.5 5 ● ● ● ●

HMC1024 1W Power Amplifier 27.5 to 33.5 5 ● ● ● ● ●HMC1029 2W Power Amplifier 29 to 37 5 ● ● ● ●HMC952 2W Power Amplifier with Detector 9 to 14 4 ● ● ● ● ●HMC952LP5GE 2W Power Amplifier with Detector 9 to 14 4 ● ● ● ●

HMC1049 Wideband LNA 0.3 to 20 4 ● ● ● ● ●

HMC994LP5E Wideband 0.5W Power Amplifier 0.01 to 30 4 ● ● ● ● ●

Attenuators

HMC985LP4KE Voltage Variable Attenuator 10 to 40 11 ● ● ● ● ● ● ●

Clocks & Timing

HMC988LP3EProgrammable Clock

Divider & Delay4 1, 7, 10 ● ● ● ● ● ● ● ●

HMC1031MS8EClock Generator

with Integer-N PLL500 MHz 1, 7, 10 ● ● ● ● ● ● ● ●

HMC1033LP6GEHigh Performance Clock Generator,

with Fractional-N PLL+VCO, 3.3V500 MHz 1, 10 ● ● ● ● ● ● ● ●

HMC1035LP6GEHigh Performance Clock Generator,

with Fractional-N PLL+VCO, 3.3V2500 MHz 1, 10 ● ● ● ● ● ● ● ●

Data Converters

HMCAD1104 10-Bit Octal Channel ADC20/40/50/65

MSPS6 ● ● ● ● ● ● ●

HMCAD5831LP9BE 3-Bit ADC with 1:2 Demux 26 GSPS 7 ● ● ● ●HMC760LC4B Track-and-Hold Amplifier DC to 5 6 ● ● ● ● ●HMC661LC4B Track-and-Hold Amplifier DC to 18 6 ● ● ● ● ●

DC Power Management

HMC980 High Current Bias Controller 5 to 16.5V 9 ● ● ● ● ● ● ● ●

Filters - Tunable

HMC1044LP3E Programmable Harmonic Low Pass DC to 3 3 ● ● ● ● ● ● ●HMC897 Band Pass 9 to 19 9 ● ● ● ●

Mixers

HMC990LP4E High IP3 Downconverter 0.7 to 3.5 8 ● ● ● ● ● ●HMC1048LC3B Double-Balanced Mixer 2 to 18 8 ● ● ● ● ●HMC1015 Triple-Balanced Mixer 26 to 32 8 ● ● ● ● ●

Hittite Microwave offers over 1,025 products across 35 product lines. Our custom and standard products support a wide range of wireless / wired communications and radar applications for the following markets.

3 JUNE 2012

Off

-Th

e-S

he

lf

New 10-Bit Octal Channel A/D Converter, Ideal for ATE, MIMO Antennas & High Speed Data AcquisitionsSee Page 6 for details.

Miniature Filter Solution Eliminates Local Oscillator Harmonics!Industry’sFirstProgrammableHarmonicFilterforMulti-Standard,Multi-CarrierApplications

Hittite has launched a new programmable bandwidth LPF (Low Pass Filter) targeted at all applications that use quadrature modulators and/or demodulators. The HMC1044LP3E filters out LO harmonics and ensures little or no LO contribution to modulator sideband rejection or demodulator image rejection performance. Although targeted at LO filtering applications, the HMC1044LP3E can also be used to filter all RF harmonics such as those generated by amplifiers and mixers.

The HMC1044LP3E offers a choice of 16 programmable bands which are optimized for cellular applications ranging from 1 to 3 GHz. The HMC1044LP3E is a truly wideband part compatible with wideband PLLs with Integrated VCOs and wideband quadrature modulators and demodulators. The HMC1044LP3E enables wideband multi-standard, multi-carrier designs that can be dynamically configured for each application.

New Products by Market Application

Broad

band

Cel

lula

r In

fras

truc

ture

Fibe

rOptic

&

Net

wor

king

Microwav

e&m

mWav

eM

ilita

ry

Spa

ce

Test

&

Mea

sure

men

t

Autom

otive

Part Number FunctionFrequency

(GHz)Page

Number

Hittite Microwave offers over 1,025 products across 35 product lines. Our custom and standard products support a wide range of wireless / wired communications and radar applications for the following markets.

Optical Modulator Drivers

HMC5850BG 8 V-pp Optical Modulator Driver 32 Gbps 1 ● ●

Transceivers - New Product Line!

HMC6000 60 GHz Integrated Transmitter 57 to 64 1 ● ● ● ● ●HMC6001 60 GHz Integrated Receiver 57 to 64 1 ● ● ● ● ●

HMCAD1104

Example of Modulator Sideband Rejection With and Without HMC1044LP3E

HMC1044LP3E for Programmable Harmonic LPF Gain vs. Frequency

-40

-35

-30

-25

-20

-15

-10

-5

0

0 1000 2000 3000 4000 5000 6000 7000 8000 9000

FREQUENCY (MHz)

INS

ER

TIO

N L

OS

S (

dB)

Band 0

Band 7 Band 15

Band 8

Low Bands

High Bands

-60

-50

-40

-30

-20

-10

500 1000 1500 2000 2500 3000UN

CA

LIB

RA

TE

D S

IDE

BA

ND

RE

JEC

TIO

N (

dBc)

LO FREQUENCY (MHz)

With Filter

Without Filter

Targeted Image/Sideband Rejection Performance

Features

• Programmable Bandwidth Tracks Wideband Sources to 3 GHz

• 20 dB Typical LO Harmonic Rejection Improves Modulator/Demodulator Sideband/Image Rejection

• Integrated Filter, No Calibration Required

• Footprint up to 90% Smaller than Fixed Passive LO Filters

• Packaged in a compact 3x3 mm QFN leadless package.

JUNE 20124

Off

-Th

e-S

he

lf

New Power Amplifier Solutions for General PurposeMicrowaveCommunications&Sensors

Output Psat vs. Temperature

Features

• High P1dB Output Power: +28 dBm

• High Psat Output Power: +30 dBm

• High Gain: 14 dB

• High Output IP3: +36 dBm

• Supply Voltage: +10V @ 250 mA

Ideal for Test Instrumentation

The HMC994LP5E is a GaAs MMIC pHEMT Distributed Power Amplifier which operates between 100 MHz and 30 GHz. The amplifier provides 14 dB of gain, 36 dBm output IP3 and +28 dBm of output power at 1 dB gain compression while requiring 250 mA from a +10V supply. The HMC994LP5E exhibits a slightly positive gain slope from 5 to 25 GHz making it ideal for EW, ECM, radar and test equipment applications. The HMC994LP5E amplifier I/Os are internally matched to 50 Ohms.

HMC994LP5E 0.5 Watt Power Amplifier, 0.01 to 30 GHz

HMC1049 Wideband Low Noise Amplifier, 0.3 to 20 GHz

Features

• Low Noise Figure: 1.9 dB

• Gain: 15 dB

• P1dB Output Power: +17 dBm

• Supply Voltage: 7V @ 70 mA

• 50 Ohm Matched Input/Output

Unique Noise Figure Performance

The HMC1049 is a GaAs MMIC pHEMT Low Noise Amplifier die which operates between 300 MHz and 20 GHz and delivers 15 dB gain, 1.8 dB noise figure and +18 dBm of saturated output power at midband. This cascade distributed amplifier consumes only 70 mA from a +7V supply and employs a novel topology which maintains excellent noise figure at low frequencies. Due to its compact size and simplified biasing, the HMC1049 is ideal for wideband multi-chip-module and subsystem applications.

Noise Figure vs. Temperature

Output Psat vs. Temperature

Features

• High P1dB Output Power: +34.5 dBm

• High Psat Output Power: +35 dBm

• High Gain: 36 dB

• High Output IP3: +43 dBm

• Supply Voltage: +6V @ 1400 mA

High Gain X-Band PAs

The HMC952 & HMC952LP5GE are four stage GaAs pHEMT MMIC Medium Power Amplifiers with temperature compensated on chip power detectors which operate between 9 and 14 GHz. These amplifiers provide 33 dB of gain, +35 dBm of saturated output power and 27% PAE from a +6V supply. With up to +43 dBm IP3 the HMC952LP5GE is ideal for high linearity applications in miltary and space as well as point-to-point and point-to-multi-point radios. The HMC952 and HMC952LP5GE I/Os are internally matched to 50 Ohms.

HMC952&HMC952LP5GE 2 Watt Power Amplifiers, 9 to 14 GHz

26

28

30

32

34

36

38

9 10 11 12 13 14

+25C+85C -40C

FREQUENCY (GHz)

Psa

t (dB

m)

0

1

2

3

4

5

6

0 2 4 6 8 10 12 14 16 18 20

+25 C+85 C -55 C

NO

ISE

FIG

UR

E (

dB)

FREQUENCY (GHz)

8

12

16

20

24

28

32

0 5 10 15 20 25 30

+25 C+85 C -40 C

Psa

t (dB

m)

FREQUENCY (GHz)

5 JUNE 2012

Off

-Th

e-S

he

lf

New Power Amplifier Solutions for General PurposeMicrowaveCommunications&Sensors

Gain & P1dB vs. Frequency

Features

• Saturated Output Power: +35 dBm @ 25% PAE

• High Output IP3: +42 dBm

• High Gain: 24 dB

• DC Supply: +6V @ 1400 mA

• No External Matching Required

Powerful Output Amplifier

The HMC1029 is a four stage GaAs pHEMT MMIC 2 Watt Power Amplifier which operates between 29 and 37 GHz. The HMC1029 provides 24 dB of gain, +35 dBm of saturated output power and 25% PAE from a +6V power supply. The HMC1029 exhibits excellent linearity and is optimized for high capacity point-to-point and point-to-multi-point radio systems. The amplifier configuration and high gain make it an excellent candidate for last stage signal amplification before the antenna.

HMC1029 2 Watt Power Amplifier Chip, 29 to 37 GHz

Features

• High P1dB Output Power: +24.5 dBm

• High Psat Output Power: +27.5 dBm

• High Gain: 21 dB

• High Output IP3: +35 dBm

• Supply Voltage: +6V @ 500 mA

Versatile, Wideband Driver

The HMC1014 is a four stage GaAs pHEMT MMIC Medium 0.5 Watt Power Amplifier die which operates between 33.5 and 46.5 GHz. The amplifier provides 21 dB of gain, +27.5 dBm of saturated output power, and 27% PAE from a +6V supply. With up to +35 dBm OIP3 the HMC1014 is ideal for high linearity applications in miltary and space as well as point-to-point and point-to-multi-point radios. The HMC1014 amplifier I/Os are internally matched facilitating integration into multi-chip- modules (MCMs).

HMC1014 0.5 Watt Power Amplifier Chip, 33.5 to 46.5 GHz

HMC1024 1 Watt Power Amplifier Chip, 27.5 to 33.5 GHz

Features

• Saturated Output Power: +31.5 dBm @ 29% PAE

• High Output IP3: +40 dBm

• High Gain: 24 dB

• DC Supply: +6V @ 600 mA

• No External Matching Required

Flat Gain, High Efficiency

The HMC1024 is a four stage GaAs pHEMT MMIC 1 Watt Power Amplifier which operates between 27.5 and 33.5 GHz. The HMC1024 provides 24 dB of gain, +31.5 dBm of saturated output power and 29% PAE from a +6V power supply. The HMC1024 exhibits excellent linearity and is optimized for high capacity point-to-point and point-to-multi-point radio systems. The amplifier configuration and high gain make it an excellent candidate for last stage signal amplification before the antenna.

Broadband Gain & Return Loss vs. Frequency

Broadband Gain & Return Loss vs. Frequency

-30

-20

-10

0

10

20

30

27 28 29 30 31 32 33 34

S21S11S22

RE

SP

ON

SE

(dB

)

FREQUENCY (GHz)

15

20

25

30

35

28 30 32 34 36 38

Gain

P1dB

GA

IN (

dB)

& P

1dB

(dB

m)

FREQUENCY (GHz)

-50

-40

-30

-20

-10

0

10

20

30

33 35 37 39 41 43 45 47

S21S11S22

RE

SP

ON

SE

(dB

)

FREQUENCY (GHz)

JUNE 20126

Off

-Th

e-S

he

lf

UniqueDataConverterSolutionsfor General PurposeMicrowaveCommunications&Test

Power Dissipation Per Channel

Features

• 65 MSPS Maximum Sampling Rate

• Ultra Low Power Dissipation 12 mW/Channel at 20 MSPS 20 mW/Channel at 40 MSPS 25 mW/Channel at 50 MSPS 30 mW/Channel at 65 MSPS

• 61.6 dB SNR at 8 MHz FIN

• 0.5 μs Startup from Sleep, 15 μs from Power Down

Ideal for ATE, MIMO Antennas & High Speed Data Acquisition!

HMCAD1104 is a high performance low power octal analog-to-digital converter (ADC). The ADC is based on a proprietary structure and employs internal reference circuitry, a serial control interface and serial LVDS output data. Data and frame synchronization output clocks are supplied for data capture at the receiver. The very low start up times for the HMCAD1104 allows significant power reduction in duty cycled systems, by utilizing the sleep mode or power down mode when the receive path is idle.

HMCAD1104 10-Bit Octal Channel A/D Converter, 20/40/50/65 MSPS

HMC760LC4B Wideband 4 GSPS Track-and-Hold Amplifier, DC to 5 GHz

Features

• 5 GHz Input B/W (1 Vp-p Full Scale)

• 4 GSPS Maximum Sampling Rate

• ≥66 dB SFDR (0.5 Vp-p Input, CLK = 1 GSPS)

• ≥56 dB SFDR (1 Vp-p Input, CLK = 1 GSPS)

• >60 dB Hold Mode Feedthrough Rejection

Ideal for Wideband Receivers

The HMC760LC4B is a fully differential, single rank, Track-and-Hold Amplifier (THA) that provides wide bandwidth and dynamic range performance to wide-band sampled signal systems. The THA offers precision signal sampling over 5 GHz bandwidth with 9 to 10-bit linearity from DC to 5 GHz input frequency, 0.9 mV noise and <70 fs random aperture jitter. The device can be clocked to 4 GSPS with minimal dynamic range loss. The THA can be used to expand the bandwidth and/or high frequency linearity of high speed A/D conversion and signal acquisition systems.

Time Domain Output Waveform @ fclk = 500 MHz, fin = 4.125 GHz

Features

• 18 GHz Input B/W (1 Vp-p Full Scale)

• 4 GSPS Maximum Sampling Rate

• 68 dB SFDR (0.5 Vp-p Input, CLK = 1 GSPS)

• 57 dB SFDR (1 Vp-p Input, CLK = 1 GSPS)

• >60 dB Hold Mode Feedthrough Rejection

Extends ADC Bandwidth

The HMC661LC4B is a fully differential, single rank, Track-and-Hold Amplifier (THA) that provides unprecedented bandwidth and dynamic range per-formance to wideband sampled signal systems. The THA offers precision signal sampling over 18 GHz bandwidth, with 9 to 10-bit linearity from DC to beyond 5 GHz input frequency, 1.05 mV noise and <70 fs random aperture jitter. The device can be clocked to 4 GSPS with minimal dynamic range loss. The THA can be used to expand the bandwidth and/or high frequency linearity of high speed A/D conversion and signal acquisition systems.

HMC661LC4B Ultra Wideband 4 GSPS Track-and-Hold Amplifier, DC to 18 GHz

Time Domain Output Waveform @ fclk = 500 MHz, fin = 10.125 GHz

-0.6

-0.4

-0.2

0

0.2

0.4

0.6

0 2 4 6 8 10

DIF

FE

RE

NT

IAL

OU

TP

UT

VO

LTA

GE

(V)

TIME (ns)

-0.6

-0.4

-0.2

0

0.2

0.4

0.6

0 2 4 6 8 10

DIF

FE

RE

NT

IAL

OU

TP

UT

VO

LTA

GE

(V)

TIME (ns)

5

10

15

20

25

30

35

10 20 30 40 50 60 70

PO

WE

R D

ISS

IPT

ION

(m

W)

SAMPLING RATE (MSPS)

7 JUNE 2012

Off

-Th

e-S

he

lf

DataConverter&ClockingSolutions for High Resolution Applications

Features

• Programmable Clock Divide by 1/2/4/8/16/32

• Delay Adjustment in Multiples of 1/2 Clock Cycles or in 60 Steps of 20 ps

• -170 dBc/Hz Noise Floor @ 100 MHz Output

• Up to 4 GHz Operation with 800 mVp-p LVPECL Output

Ideal for Extremely Low Phase Noise Requirements

The HMC988LP3E is an ultra low noise clock divider capable of dividing by 1/2/4/8/16/32. It is a versatile device with additional functionality including adjustable output phase, adjustable delay in 60 steps of ~20 ps, a clock synchronization function, and a clock invert option. Housed in a compact 3 x 3 mm SMT QFN package, the clock divider offers a high level of functionality. The device works with 3.3V supply or may be connected to a 5V supply to utilize the on-chip regulator.

HMC988LP3E Programmable Clock Divider & Delay, DC to 4 GHz

Features

• <2 mA Current Consumption

• High Phase Frequency Detector Rate: 140 MHz

• Hardware Pin Programmable Clock Multiplication Ratios: x1/x5/x10

• Lock Detect Indicator

• Power Down Mode (0.7 μA typical)

Ideal for Jitter Attenuation

The HMC1031MS8E forms a complete clock generator solution with an external loop filter and a VCXO. The HMC1031MS8E requires only 2 mA and features an integer-N divider supporting divide ratios of 1/5/10 that is controlled via external hardware pins and requires no serial port. The integrated phase detector and charge pump are capable of operating up to 140 MHz and a maximum VCXO input of 500 MHz ensuring frequency compliance with a wide variety of system clocks and VCXOs. The HMC1031MS8E is targeted at low frequency jitter cleaner and reference clock generation applications.

HMC1031MS8E Clock Generator with Integer-N PLL, 0.1 to 500 MHz

HMCAD5831LP9BE 26 GSPS 3-Bit ADC with Over Range, Inhibit & 1:2 DEMUX

Features

• Full Flash Architecture

• Over/Under Range Bit

• Data Inhibit & XOR Function

• Integrated 1:2 Demux

• Programmable Differential CML Output Swing

Ideal for Serial Data Links & Test Equipment for Link Diagnostics

The HMCAD5831LP9BE is a wideband 3-bit analog-to-digital converter with over/under range bit. The converter operates at speeds up to 26 GSPS with a Nyquist input. Reference ladder end voltages are set externally allowing the user to customize input common mode and swing levels. ADC outputs can be forced to 0 by using the data inhibit function. Output data can be modulated by an external clock via the XOR CML input.

Spectral Performance FFT(9.6875 GHz input, 20 GS/s clock)

Phase Noise Performance vs. Divider Ratio at 1.5 GHz Div 1/2/4/8/16

10 MHz to 100 MHz with NoisyReference Phase Noise [1]

-200

-180

-160

-140

-120

-100

100 101 102 103 104 105

SourceDiv 1(Bypass)Div 2Div 4Div 8Div 16

OFFSET (KHz)

PH

AS

E N

OIS

E (

dBc/

Hz)

-180

-160

-140

-120

-100

-80

-60

-40

101 102 103 104 105 106

HMC1031MS8E PLL + Crystek CVHD-950 100MHz VCXO10MHz High Jitter Reference

OFFSET (Hz)

PH

AS

E N

OIS

E (

dBc/

Hz)

12KHz - 20MHz Integrated JitterHMC1031/VCXO: 55.2 fsec10MHz Input: 4.02 psec

[1] Loop Filter Value: C1 4.7 μF, R2 1.2 KΩ, C2 62 μF for Loop Filter bandwidth 8 Hz, VCXO: Crystek CVHD-950 100 MHz

-50

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

0 2 4 6 8 10

dBF

S (

dB)

FREQUENCY (GHz)

JUNE 20128

Off

-Th

e-S

he

lf

Mixer&ConverterSolutionsforGeneralPurpose WirelessInfrastructure&MicrowaveApplications

Features

• High Input IP3 of +25 dBm @ 2200 MHz

• Power Conversion Gain of 7 dB

• Input P1dB of +12 dBm

• SSB Noise Figure of 9 dB

• 55 dBc Channel-to-Channel Isolation

Compact, Low Power Dissipation

The HMC990LP4E is a high linearity dual channel downconverting mixer optimized for multi-standard diversity receiver applications that require low power consumption and small size. The HMC990LP4E features new wideband limiting LO amplifiers to achieve an unprecedented RF bandwidth of 700 to 3500 MHz. Unlike conventional narrow band downconverter RFICs. The HMC990LP4E supports both high side and low side LO injection over the entire RF frequency band. The RF and LO input ports are internally matched to 50 Ohms

HMC990LP4E Broadband High IP3 Dual Channel Downconverter, 0.7 to 3.5 GHz

HMC1048LC3B GaAs MMIC Double-Balanced Mixer, 2 to 18 GHz

Features

• High Input IP3: 23 dBm

• LO /RF Isolation: 38 dB

• LO /IF Isolation: 28 dB

• RF/IF Isolation: 15 dB

• IF Bandwidth: DC to 4 GHz

Versatile Wideband Mixer

The HMC1048LC3B is a general purpose double balanced mixer that can be used as a downconverter with DC to 4 GHz at the IF port and 2 to 18 GHz at the RF port. This mixer requires no external components or matching circuitry. The HMC1048LC3B provides excellent LO/RF, LO/IF and RF/IF isolation. The mixer operates with LO drive levels as low as +9 dBm. The HMC1048LC3B eliminates the need for wire bonding and allows the use of surface mount manufacturing techniques.

Conversion Gain vs. Temperature,IF= 100 MHz, LO= 13dBm

Features

• Passive: No DC Bias Required

• High Input IP3: 20 dBm

• High LO/RF Isolation: 45 dB

• High 2LO/IF Isolation: 50 dB

• Wide IF Bandwidth: 16 to 22 GHz

• Upconversion & Downconversion Applications

Ideal for SATCOM Transceivers

The HMC1015 is a general purpose triple balanced mixer chip that can be used as a frequency converter with 16 to 22 GHz at the IF port and 26 to 32 GHz at the RF port. This mixer requires no external components or matching circuitry. The HMC1015 provides excellent LO/RF, LO/IF and 2 LO/IF isolation due to optimized balun structures and operates with LO drive levels from +9 dBm to +15 dBm. The HMC1015 wideband mixer exhibits consistent conversion gain and compression across its bandwidth.

HMC1015 GaAs MMIC Triple Balanced Mixer Chip, 26 to 32 GHz

Conversion Gain vs. Temperature, Upconverter, LO= 11 GHz

Input IP3 vs. LO Drive @ VGATE=4.8V

8

12

16

20

24

28

0.7 1.1 1.5 1.9 2.3 2.7 3.1 3.5

-6 dBm-3 dBm 0 dBm+3 dBm

IIP3

(dB

m)

FREQUENCY (GHz)

-25

-20

-15

-10

-5

0

26 27 28 29 30 31 32

+25 C+85 C -55 C

CO

NV

ER

SIO

N G

AIN

(dB

)

RF FREQUENCY (GHz)

-20

-16

-12

-8

-4

0

2 4 6 8 10 12 14 16 18

+25C+85C -40C

CO

NV

ER

SIO

N G

AIN

(dB

)

RF FREQUENCY (GHz)

9 JUNE 2012

Off

-Th

e-S

he

lf

NewDCPowerManagement&TunableBandPassFilters for Module & Subsystem Applications

Features

• Automatic Gate Voltage Adjustment (No Calibration Required)

• Supply Voltage: 5V to 16.5V

• Adjustable Drain Current up to 1.6 A

• Sink or source gate current

• Fast Enable/Disable

• Trigger-out Output for Daisy Chain

• Power-Up & Power-Down Sequencing

Ideal for Biasing Hittite PAs

The HMC980 is an active bias controller that can automatically adjust the gate voltage of an external amplifier to achieve constant bias current. With an integrated controller, HMC980 achieves safe power on/off, disable/enable and automatic supply sequencing ensuring the safety of the external amplifier. It can be used to bias any enhancement and depletion type amplifier operating in Class-A regime with drain voltages (VDRAIN) from 5V to 16.5V and drain currents (IDRAIN) up to 1.6A, offering a complete biasing solution.

HMC980 High Current Active Bias Controller Chip

HMC897 Tunable Band Pass Filter Chip, 9 to 19 GHz

Features

• Fast Tuning Response: 200 ns

• Excellent Wideband Rejection

• Single Chip Replacement for Mechanically Tuned Designs

• Small Size: 2.48 x 1.16 x 0.10 mm

Ideal for Fast Tuning Receivers

The HMC897 is a MMIC band pass filter which features a user selectable passband frequency. The 3 dB filter bandwidth is approximately 18%, while the 20 dB filter bandwidth is approximately 35%. The center frequency can be varied between 9 and 19 GHz by applying an analog tune voltage between 0 and 14V. This tunable filter can be used as a much smaller alternative to physically large switched filter banks and cavity tuned filters. The HMC897 complements Hittite’s broad line of low pass, band pass and band reject tunable MMIC filters.

Broadband Insertion Loss vs. VCTRL

Bias Current Accuracy vs. Temperature

1300

1325

1350

1375

1400

1425

1450

1475

3.3 3.5 3.6 3.8 4 4.2 4.3 4.5 4.7 4.8 5

+25 C+85 C -55 C

IDR

AIN

(m

A)

VDIG (V)

IDrain is set to: 1409mA

HMC591LP5 is used as external amplifier

Supply Voltage Range (V) Function

VDRAIN Voltage Range

(V)

IDRAIN BiasCurrent

(mA)

IGATEDriveCurrent (mA)

VGATE Voltage

Range (V)

Over/Under IDRAIN

Current Alarm

Low VDD Alarm

PartNumber

4 to 12 Active Bias Controller 4 to 12 20 to 200 -0.8 to 0.8 -2.5 to 2.0 - - HMC981

4 to 12 Active Bias Controller 4 to 12 0 to 200 -0.8 to 0.8 -2.5 to 2.5 - - HMC981LP3E

5 to 16.5 Active Bias Controller 3 to 15 0 to 500 -4 to 4 -2.5 to 2.5 Yes Yes HMC920LP5E

5 to 16.5 Active Bias Controller 5 to 16.5 50 to 1600 -4 to 4 -2.46 to +2.04 Yes - HMC980

5 to 16.5 Active Bias Controller 5 to 16.5 50 to 1600 -4 to 4 -2.46 to +2.04 Yes - HMC980LP4E

NEW!

FrequencyRange (GHz) Function Return

Loss(dB)3dB

Bandwidth(%)LowSideRejection

Frequency(Rej.>20dB)HighSideRejection

Frequency(Rej.>20dB)Tuning

Response (ns)Part

Number

1 - 2 Band Pass 10 11 0.8 x Fcenter 1.2 x Fcenter 200 HMC890LP5E

2 - 3.9 Band Pass 10 9 0.9 x Fcenter 1.15 x Fcenter 200 HMC891LP5E

4 - 7.7 Band Pass 15 9 0.9 x Fcenter 1.13 x Fcenter 200 HMC892LP5E

4.8 - 9.5 Band Pass 7 6.5 0.9 x Fcenter 1.1 x Fcenter 200 HMC893LP5E

9 - 19 Band Pass 9.5 18 0.81 x Fcenter 1.17 x Fcenter 200 HMC897

9 - 19 Band Pass 9.5 18 0.81 x Fcenter 1.17 x Fcenter 200 HMC897LP4E

18.5 - 37.0 Band Pass 10 18 0.81 x Fcenter 1.20 x Fcenter 200 HMC899LP4E

19 - 38 Band Pass 10 18 0.81 x Fcenter 1.20 x Fcenter < 100 HMC899

NEW!

-80

-70

-60

-50

-40

-30

-20

-10

0

0 5 10 15 20 25 30 35 40

0V3V7V14V

INS

ER

TIO

N L

OS

S (

dB)

FREQUENCY (GHz)

JUNE 201210

Off

-Th

e-S

he

lf

The HMC5850BG is a two stage GaAs MMIC pHEMT distributed amplifier, (Figure 1) that operates from -40 °C

to +85 °C, provides up to 32 dB of gain and exhibits very low additive rms jitter of 230 fs. The HMC5850BG has demonstrated successful interoperation at 32 Gbps with a MUX from a leading supplier (Figure 2).

Features of HMC5850BG include high gain across a wide frequency range, low power dissipation, very compact size, integrated peak detector function, fast rise/fall time, and integrated bias tee inductor. The driver provides 8 Vp-p saturated output swing up to 32 Gbps and features output swing and eye crossing adjustment. Control of the HMC5850BG output amplitude and eye crossing can be further simplified by using Hittite’s active bias controller products such as HMC981LP3E.

With a wide supply operating range of +5V to +7V, the HMC5850BG provides system designers with scalable power dissipation for varying output drive requirements. For example, the HMC5850BG consumes only 0.8W at 5 Vp-p output and 1.4W at 8 Vp-p output with a supply voltage of +6V. The integrated peak detector function enables system designers to automatically monitor and maintain a constant output swing from the modulator driver while, the integrated high speed bias tee eliminates the requirement for external components.

The HMC5850BG is housed in a 9.75 mm x 6 mm x 3.29 mm laminate substrate based BGA surface mount package and features RF I/Os that are internally matched to 50 Ohms. For more information, please contact FO@hittite.com

NewProductsforFiberOptics&Networking andMicrowave/mmWaveCommunications

Hittite Clock ICs Improve Data Converter Performance!…(continued from page 1)

HMC5850BG Low DC Power 40G/100G Modulator Driver!…(continued from page 1)

distribution ICs feature very low noise floors of <-166 dBc/Hz and are ideal for driving data converters, SERDES and PHYs.

Data Converters are critical elements in communication systems forming bridges between analog transmission media such as fiber optics, microwave, RF and digital processing blocks such as FPGAs and DSPs. System designers often focus on selecting the most appropriate data converters for the application; consideration must be given to clock generation device selection also. A broad range of clock generators with widely different performance attributes are available; without careful review of clock generator phase noise and jitter performance characteristics, data converter dynamic range and linearity performance can be severely impacted. For more information, please contact timing@hittite.com.

ADC SNR vs. Clock Jitter & Input Frequency

70

75

80

85

90

95

100

1 10 100 1000

70 fs HMC1034LP6GE Integer Mode110 fs HMC1034LP6GE Fractional Mode500 fs1000 fs

SN

R (

dBfs

)

SIGNAL FREQUENCY (MHz)

500 fs: High Jitter Clock, 1 ps: High Jitter Clock

Figure 1: Functional Block Diagram

Figure 2: HMC5850BG Output Performance Measured with Leading Mux Vendor at 32 Gbps

RFIN

VD

D

VGGA

PeakDetector

RFOUT

VCTRLA VGGB VCTRLB

VD

ET

R

VD

ET

VB

_VD

ET

VD

D

Stage 1 Stage 2

Table 1: Clock GeneratorsPart

NumberMax.Frequency

(MHz) Function Typ.Phase Jitter (fsRMS)

Phase Noise Floor(dBc/Hz)

Max.ReferenceFreq.(MHz)

Typical Power Consumption (W)

FigureofMerit(Frac/Int)(dBc/Hz)

HMC1031MS8E 500Integer Mode PLL

(x1, x5, x10)Defined by

VCXODefined by

VCXO140 0.005 -208

HMC1032LP6GE 350High Performance Fractional-N

Clock Generator75 -165 350 0.86 -227 / -230

HMC1033LP6GE 5003.3V Only, High Performance,

Frac-N Clock Generator120 -155 350 0.68 -226 / -229

HMC1035LP6GE 25003.3V Only, High Performance,

Frac-N Clock Generator120 -155 350 0.68 -226 / -229

HMC1034LP6GE 3000High Performance Fractional-N

Clock Generator78 -165 350 0.86 -227 / -230

Table 2: Clock DistributionPart

NumberMax.ClockRate (GHz) Function Input Output Phase Jitter

(12kto20MHz)Rise/Fall Time (ps)

Channel Skew (ps)

Disable Mode

Power Supply (V)

HMC988LP3E 4Clock Divider & Delay

ManagementLVPECL, LVDS,

CML, CMOSLVPECL 13 fs RMS 90

300 to 1500Prog. Delay

Yes 5 or 3.3

HMC987LP5E 8 1:9 Fanout BufferLVPECL, LVDS,

CML, CMOSLVPECL 8 fs RMS 65 3.1 Yes 3.3

NEW!

NEW!

NEW!

NEW!

11 JUNE 2012

Off

-Th

e-S

he

lf

tuning across the 57 to 64 GHz band in steps of 500 or 540 MHz (one quarter of the IEEE channel spacing) depending upon the reference input frequency. It features as much as 38 dB gain (with 17 dB gain-control range) to achieve up to +12 dBm linear output power and +17 dBm saturated output power. The differential RF output provides a low-loss RF transition with high output efficiency.

The HMC6001 receiver IC operates with single-ended input signals from a selected channel in the 60 GHz band and down converts them to differential analog I and Q baseband signals. The receiver chip includes all necessary frequency generation, gain control and filtering to support RF signal bandwidths up to 1.8 GHz. The receiver chip contains programmable baseband filters to set the highpass corner frequency for removal of residual DC offset and local oscillator (LO) feedthrough signals and to set the lowpass frequency for lower bandwidth signals. The HMC6001 exhibits a 6 dB noise figure at the maximum gain setting and provides a 65 dB gain control range in 1 dB steps.

Both the HMC6000 and HMC6001 feature integrated phase noise of -25 dBc at the 1.76 GHz WiGig symbol rates, enabling modulation formats up to 16-state quadrature amplitude modulation (16-QAM). Both the HMC6000 and HMC6001 exhibit phase noise of typically -86 dBc/Hz at offsets 1 MHz from the carrier. The table, right, summarizes the performance of the chipset. A simple four-wire digital serial interface provides full control and status reporting for these ICs, including frequency channel selection, gain control, circuit bias and filter bandwidths.

Hittite offers both connectorized and antenna-in-package (AiP) evaluation kits based on the HMC6000 and HMC6001 millimeterwave transceiver ICs. Please contact txrx@hittite.com for more information.

New Products & News from Hittite

New Transceiver Product Line!…(continued from page 1)

HMC6000TRANSMITTER

Antenna

Indoor Gbps Links

ASICPROCESSOR

Control

AGC

VCXO

HMC6001RECEIVER

Antenna

GigE

USB

HDMI

Consumer-Oriented Multi-Gbps Solution Adhering to the WiGig Standard

KeyFeature HMC6000 mmW Transmitter IC

HMC6001 mmWReceiverIC

Operating Frequency Range 57 to 64 GHz (supports IEEE channel plan)

Linear Output Power +12 dBm –

Noise Figure – 6 dB

Maximum Gain 38 dB 67 dB

Gain Control Range 17 dB 65 dB / 1 dB Steps

Phase Noise @ 1 MHz Offset -86 dBc/Hz -86 dBc/Hz

Power Dissipation 0.8W 0.61W

Package Chip Chip

The HMC985LP4KE is an absorptive Voltage Variable Attenuator (VVA) which operates from 10 to 40 GHz and is ideal in designs where an analog DC control signal must be used to control RF signal levels over a 35 dB dynamic range. It features two shunt-type attenuators which are controlled by two analog voltages, Vctrl1 and Vctrl2. Optimum linearity performance of the attenuator is achieved by first varying Vctrl1 of the first attenuation stage from -3V to 0V with Vctrl2 fixed at -3V.

Live Product Demos! Visit Us at MTT-S, Booth #1701 June 19-21 Montreal!Hittite Microwave will be exhibiting at the 2012 IEEE MTT-S International Microwave Symposium and Exhibition to be held in Montreal on June 19 - 21, 2012.

Hittite will feature over 25 new products and conduct live demonstrations of our multi-GHz Quantizer (ADC), Instrumentation, PLL with Integrated VCO, Direct Conversion Receiver and Broadband High IP3 Dual Downconverter solutions throughout the exhibition.

Features

• Wide Bandwidth: 10 to 40 GHz

• Excellent Linearity: +30 dBm Input IP3

• Wide Attenuation Range: 35 dB

High Linearity Voltage Variable Attenuator, 10 to 40 GHz!Ideal for Gain Control & Temperature Compensation of Multiple Gain Stages

Attenuation vs. VCTRL (VCTRL1 = VCTRL2)

-80

-70

-60

-50

-40

-30

-20

-10

0

10 15 20 25 30 35 40

-2.4 V-2.0 V-1.6 V-1.2 V-0.8 V-0.4 V 0.0 V

AT

TE

NU

AT

ION

(dB

)

FREQUENCY (GHz)

Ref.#NL-0612

Hittite Microwave Worldwide Sales Offices

JunE 2012

Connecting Our World Through Integrated Solutions

Order On-line at: www.hittite.com© 2012, Hittite Microwave Corporation, All Rights Reserved.

2 Elizabeth Drive • Chelmsford, MA 01824 • 978-250-3343 tel • 978-250-3373 fax

Boston • Hyderabad • Cork • London • Munich • Seoul • Shanghai • Stockholm • Tokyo

Receive the latest product releases at www.hittite.com - click on “My Subscription”Scan here to go to www.hittite.com

Sales Representatives

AmericasBrazil; Vermont Rep. Com. Ltda +55 11 3726-6655

Canada; Repwave Calgary, Ottawa & Montreal: +613-270-9811 Toronto: +647-883-7360 Vancouver: +604-929-8541

Mexico Quad State Sales and Marketing 918-499-1711

Central & South America Hittite Microwave Corporation 978-250-3343 x1250

USANorthEast&Mid-Atlantic;

CT, MA, ME, NH, So. NJ, RI & VT: Microwave Marketing Specialist 978-392-0110

Western NY: Zimmerman Sales 585-381-3186

So. CT, Metro LI & No. NJ: Comp Tech 973-832-4545

Eastern PA & So. NJ Omega Electronic Sales, Inc. 215-244-4000

Western PA Schillinger Associates, Inc. 765-457-7241

DC, DE, MD, VA & WV: Vincent Pirro Electronics 410-489-9554

USAMid-West;

IA Essig & Associates 319-363-8703

AK, KS, LA, W. MO, OK, TX: Quad State Sales & Marketing 918-499-1711

IL & WI: TEQ Sales 847-742-3767

IN, KY, MI & OH: Schillinger Associates, Inc. 765-457-7241

NE: HMC Central (North) - North America 312-485-8730

MN, ND, SD & W. WI: Matrix Design Technology 952-400-1070

USASouthEast;

AL, FL, GA, MS, NC, SC & TN: Precision Marketing Inc. 954-752-1700

USASouthWest;

AZ & NM: Saguaro Technical Sales, Inc. 480-947-3724

AR: HMC Central (South) - North America 817-727-7146

USAWest;

CO, ID, MT, UT & WY: Innovation Sales 303-652-3030

No. CA & NV: Custom & Wireless Sales 408-371-0222

So. CA: Acetec 858-784-0900

OR & WA: Sea-Port Technical Sales 425-702-8300

Europe, Mid-East & AfricaGermany, Austria, Poland, Switzerland MEV Elektronik Service GmbH 49 5424 2340-28

Czech Republic, Estonia, Hungary, Latvia, Lithuania, Slovakia: Hittite Microwave Deutschland GmbH +49 8031-97654

Belgium, Luxemburg: Nijkerk Electronics N.V. +32 3 544 70 66

Bosnia Herzegovina, Bulgaria, Croatia, Macedonia, Romania, Serbia Montenegro & Slovenia IC Electronika +386(0) 1 568-01-18

Denmark Acte A/S +45 46 900 400

Netherlands: Nijkerk Electronics B.V. +31 20 504 14 24

Sweden: Hittite Microwave Nordic AB +46-761-763969

Finland: LKC OY +358-400-460-646France:

France: Aptech +33-1-6974-8940

L-TEQ Microwave +33-1-3007-7780

Greece: Hittite Microwave Europe Limited +44-7811-267418

United Kingdom & Ireland: Firefly Technology Ltd. +44-1256-884980

Israel: Starlight Technologies, Inc. +972-3-9410555

Italy: Special-Ind SPA +39-02-6074741

Norway: Bredengen AS +47-2100-9100

Russia Radiant-Elcom Ltd. +7(495) 725-0404

Spain & Portugal: Altaix Electronica S.A.L +34-91-636-39-39

South Africa: RF Design Laboratory CC +27-21-555-8400

Turkey: EMPA Electronics +90 (212) 465-71-99

Asia & South PacificAustralia & New Zealand: Braemac +61-8-8275-0100

China & Hong Kong: Alignment Co., Ltd. +86-755-8253-7068

Gateway Tech Co., Ltd. +0755-8608-1010

Secom Telecom Co., Ltd. +86-755-2515-5888

Wai Tat Electronics Ltd. +852-2799-7393

India: Syratron +91-802-5591107/5591031

Indonesia, Malaysia,Philippines & Singapore MEDs Technologies, Pte., Ltd. +65-6453-8313

Japan: Daito Electron Co., Ltd +81-3-3237-1471

Rikei Corporation (only FO & HSL) +81-3-3345-2150

Korea: EZ Hightech +82-031-382-6500

JS Commtech +82-2-574-6100

Makus 82-2-3490-9526

Taiwan R.O.C.: Bandtek International Co., Ltd. +886-2-2657-2615

North AmericaCT, MA, ME, NH, RI & VT: PAT Associates 401-783-9598

NJ, NY & E.PA: Tera Technologies 888-449-2799

AZ, CO, ID, MO, NM, UT & WY: Technologies West RMS 602-312-3789

CA & NV: Tritek Solutions 949-609-0560

OR & WA: Tritek Northwest 949-609-0560

EuropeBelgium, Luxembourg & Netherlands: AR Benelux B.V. +31-172-423-000

Finland, Lithuania, Latvia & Estonia: Caltest Oy 358 9 530 607 0

Greece: Vector Technologies, LTD +30-210-68-58-008

Italy: Giakova srl +39-023-3512100

Russian Federation: Radiant-Elcom Ltd. +7(495) 725-0404

Spain: AFC Ingenieros, S.A. +34 91 365 44 05

Sweden RF Partner AB +46-31-475100

Turkey: Spark Olcum Teknolojileri Ltd. Sti +90 (312) 466 821

United Kingdom: MCS Test Equipment LTD 08453 62 63 65

AsiaChina: WAT-COM Technologies 86-755-86233486

Taiwan R.O.C.: T&E Communication 886-2-82211258

Japan: Farad +82-3-5261-3091

Instrumentation Sales Representatives

CorporateHeadquarters

HittiteMicrowaveCorporationUSACorporateHeadquarters Phone: 978-250-3343 Fax: 978-250-3373 sales@hittite.com

Hittite International Limited InternationalHeadquarters Phone: +353-21-240-7996 Fax: +353-21-240-7997 sales@hittite.com

Americas

Eastern - North America Boston, MA Phone: 978-270-3167 usa-east-north@hittite.com

Philadelphia, PA Phone: 978-337-1226 usa-east-south@hittite.com

Central (North) - North America Chicago, IL Phone: 312-485-8730 usa-north@hittite.com

Central (South) - North America Dallas, TX Phone: 817-727-7146 usa-south@hittite.com

Western - North America Los Angeles, CA Phone: 626-961-5602 usa-west@hittite.com

Mexico, Central & South America Dallas, TX Phone: 978-250-3343 x1250 southamerica@hittite.com

Europe, Middle East & Africa

UnitedKingdom,Ireland,Spain, Portugal, Greece & TurkeyHittite Microwave Europe Limited Phone: +44-7811-267418 Fax: +978-250-3373 europe@hittite.com

France,Italy&BeneluxHittite Microwave Deutschland GmbH Phone: +44-7811-267418 Fax: +978-250-3373 europe@hittite.com

Northern EuropeHittite Microwave Nordic AB Phone: +46-761-763969 nordic@hittite.com

Central & Eastern EuropeHittite Microwave Deutschland GmbH Phone: +49-8031-97654 Fax: +49-8031-98883 germany@hittite.com

AfricaHittite Microwave Egypt Phone: +202-275-46812 Fax: 978-250-3373 egypt@hittite.com

Asia & Pacific

Australia & New ZealandHittite Microwave Corporation Phone: 978-250-3343 Fax: 978-250-3373 ausnz@hittite.com

IndiaHittite Microwave India Phone: +91-40-44311254 Fax: +91-40-44311100 india@hittite.com

RepublicofKoreaHittite Microwave Asia Co., Limited Phone: +82-2559-0638 Fax: +82-2559-0639 korea@hittite.com

Peoples Republic of ChinaHittite Microwave Co., Limited Shanghai Office Phone: +86-21-6209-8809 Fax: +86-21-6209-6730 china@hittite.com

Shenzhen Office Phone: +86-755-3322-2116 Fax: +86-755-3322-2117 shenzhen@hittite.com

Beijing Office Phone: +86-10-6485 9219 Fax: +86-10-6485 0377 beijing@hittite.com

JapanHittite KK Phone: +81-3-5652-5772 Fax: +81-3-5652-6694 japan@hittite.com