lvlomas.com

LIMITED / LIMITÉE

Oilfield

Oilfield 2

Cementing Alumino Silicate E-Spheres SLG Lightweight material used in well cementing to reduce cement slurry density.

Cementing Highly Reactive Metakaolin PowderPozz- Regular Oil Well cement extender. Metakaolin is a highly reactive pozzolanic material produced by the controlled activation of selected clays. Metakaolins are used in oil well cementing to improve the compressive and flexural strength of the hardened cement. The metakaolin also reduce the hardened cement permeability to liquids and gases.

Cementing Magnesium Alumino Silicate Acti-Gel 208 High efficiency suspension/anti-settling mineral. Imparts no change to viscosity of cement systems. Is not pH or temperature sensitive. Is a compact, low dusting with free flow characteristics. Performs in high slump and zero slump concrete mixes. Ensures excellent distribution of aggregates in Concrete and contributes to integrity.

Cementing Perlite Harborlite Lightweight minerals used in well cementing to reduce cement slurry density.

FUNCTION PRODUCT TRADENAME

FUNCTION PRODUCT TRADENAME

Cementing

Drilling

Drilling Cationic Polyacrylic Polymers Performol LP & LWP Synthetic Shale Control Inhibitor.

Drilling Citric acid Citric acid Anhydrous Fine granular, non edible

pH reducer and scale remover in water based drilling fluids. Iron control, scale removal, prevents precipitation of metal oxides.

Drilling Diatomite/ Diatomaceous Earth

Celite LCM, Oil well Cementing, Filtration. Diatomite can be used as a loss circulation material in drilling fluids to form a rapid dewatering plug and block loss of fluid. Also used as a filtration material, in diatomite filter units, to remove solids from completion and work-over fluids. Diatomite is used in oil well cementing as an extender and as a pozzolanic additive to reduce the permeability of the hardened cement to liquid and gases.

Drilling Environmentally Friendly Lubricant

TNB 100N Lubricant excellent for stuck coil or drillstring in drilling formations and stage plugs. TBN 100N can be spotted to improve sliding, relieve stuck plugs and shale stabilization and corrosion inhibition are extra benefits. Mixes instantaneously in water and can be added directly into the flow line and be fully mixed within seconds. Coefficient of friction of 0.01.

Drilling Glycerol Esters Mazols Drilling fluid Additive & Fracking Fluid Additive. MAZOL® glycerol and polyglycerol esters have been developed to cover the widest range of emulsification conditions. These esters are excellent emulsifiers.

Drilling Guar Gum Ricol-46 Drilling Fluid Additive Fracking Fluid Additive . Gelling agent also thickens water in order to suspend sand in frac fluid, High viscosity guar polymer suspended in a glycol ether base fluid. Controls water loss and viscosity control in drilling fluids.

Drilling Hydrocarbon Fluids D/F Fluid 17, D/F Fluid 21 and D/F Fluid 33

Current range of high-purity, low-viscosity hydrocarbon fluids that are superbly suitable for use in the drilling and fracking of oil and gas wells. Colorless, odorless, non-toxic, and non-polluting, they are high-performance replacements for diesel fuel and other less-pure hydrocarbon solvents and oils. Our D/F fluids are also BTEX-free (at limit of detection of 50 ppb), inherently biodegradable, and conform to the highest purity standards for food and pharmaceutical applications as white mineral oils as defined in 21CFR 172.878.

Oilfield 3

Drilling Lubricant for Drilling & Coiled Tubing stage drillouts

PDS Super LW (winterized) Drilling & Coiled Tubing Stage Drillouts (water and oil based muds) PDS Super LW has the lowest coefficient of friction of any lubricant on the market. It’s primary function is to provide surface -to-surface lubricity, allowing one solid to slide by another with ease providing exceptional well-bore stability, fluid loss prevention, and rheology control. PDS Super L can be customized to each application for optimal performance and efficiency.

Drilling Modified Potatoe Starch Emloc Drilling, work over or completion high temperature fluid loss control additive. Filtration control in all types of water base drilling fluids ranging from fresh to salt saturated waters. Also has shale inhibitive characteristics. It meets or exceeds API 13A specifications. Its thermal stability is up to 120C (248F). Suggested dosage is 0.5-1%.

Drilling Oilfield Fibre Arbocel grades (LCM) Finely ground cellulosic material that controls loss circulation and seepage losses in both water and oil-based drilling fluids. Bridges cracks and plugs holes. Used in frac sealing and plug/cake applications.

Drilling Organo Clay BK 886B Rheology/Viscosifier for drilling fluids (diesel and mineral based).

Drilling Organo Clay (tetraallkyl ammonium bentonite) for White Oil Systems

BK-192D Hi gelling efficiency over low to medium polarity organic fluids. Easy to incorporate and stable viscosity development. Applicable to low temp systems. Typical applications in diesel based oil drilling fluid, low aromatic hydrocarbon mineral oil based oil drilling fluid, water in oil based oil drilling fluid.

Drilling Organo Clay for Diesel Systems

BK-150D High gelling efficiency over low to medium polarity organic liquids, applicable to low temp systems.

Drilling Organo Clay for High temp Diesel Systems

BK-192F Viscocifier for any oil-based drilling fluid. Gels oil muds for long-time suspension of weighting agents in packer fluids and casing packs. Stable at temp approaching 204°C.

Drilling Poly Acrylic Polymers and Copolymers

Performol 23, 27, LHD Synthetic Thickening agent for water based drilling fluids. Achieves maximum shear-thinning viscosity and suspension properties with high Temperature tolerances .

Drilling Polyethylene Glycol Esters Mapeg MAPEG® polyethylene glycol esters are mono- and di-esters of various fatty acids. They offer graduated hydrophilic to lipophilic surface active properties which make them useful as primary and secondary emulsifiers with stability over a wide range of formulating conditions.

Drilling Polymer Slurry RHEOLOGY Modifier

XC Vis 5/10/20 Effective xanthan polymer slurry for use in either oil and gas drilling or coiled tubing horizontal cleanouts. XC Vic polymer blends are the economical choice for cleaning wellbores and they are the fastest hydrating product on the market today.

Drilling SAPP (Sodium Acid Pyrophosphate)

Sodium Acid Pyrophosphate SAPP provides bore hole stability.

Drilling Sodium Citrate Sodium Citrate Dihydrate USP24

Drilling Fluids and Oil Sands . Rheology modifier. Chelating & retarder, removal of heavy metals in oil sands.

Drilling Sorbitan Sesquioleate (SSO). Tall oil fatty acid ester of sorbitol

SSO Oil Wetting Agent, Oil slick dispersant and Corrosion Inhibitor. Derived from naturally renewable resources.

Drilling SorbitanFatty Acid Esters S-Maz Emulsifier, lubricant in Nonionic, lipophilic surfactants used to prepare highly stable water in oil emulsions. When combined with T Maz (ethoxylated sorbitan esters) S Maz is very desirable as oil in water emulsifiers in drilling fluids.

FUNCTION PRODUCT TRADENAME

Drilling (continued)

Oilfield 4

FUNCTION PRODUCT TRADENAME

FUNCTION PRODUCT TRADENAME

Emulsifier

Fracturing

Emulsifier Biodegradable Surfactant System

Stablec OFE Promotes oil-wetting of solids and increases the resistance to water contamination in oil-based muds. Improves flow properties and helps coat surfaces of shale and other solids.

Emulsifier Natural Sodium Sulfonate Petronate L Strong emulsification properties. Molecular weight is 425. Natural transparent, dark brown liquid readily soluble in mineral oil.

Emulsifier Polyoxylethylene Alkyl Ether Nonionic Surfactant

Emulgen line NPE replacement. Emulsifier and wetting agent.

Fracturing Aluminum Salt of 2-ethylhexoic acid

Calford G-810 Provides very strong gels in fracture oil wells which are based on diesel fuel or similar solvents. Will gel diesel fuel sufficiently quickly if fuel heated t approximately 70°C.

Fracturing Aluminum Soap Calford G-760 Complex soap designed to gel hydrocarbon and fracturing fluid at room temperature. Gels solvents including gasoline, diesel oil, varsol, xylene, benzene and mineral spirits.

Fracturing Ammonium Chloride (NH4Cl) Ammonium Chloride Ammonium chloride liquid solution is an acidic brine that offers many properties that serve to minimize or prevent formation damage. They are shale inhibitive and compatible with most formation water.

Fracturing Breaker Calford GB-452HF Where downhole temp are not sufficient to effect complete break (below 65°C) a companion chemical, Calford GB-452HF, is available.

Drilling Starch Cargill Gel 03420 Environmentally friendly rheology modification in water based drilling, fluid mud.

Drilling Stearic Acid -saturated C18 Stearic Acid Stearic acid is used in drilling fluids as a viscosifier and defoamer.

Drilling Talc IMERYS Talc (Fluid Loss Additive) Rheology modifier to increase gel strengths as well as viscosity.

Drilling Tall Oil Fatty Acid Sylfat FA1, FA2 Emulsifiers and rheology modifiers in drilling fluid additive. Oil based drilling fluid. Helps stabilize emulsions, reduces HPHT filtration.

Drilling TKPP (Tetrapotassium Pyrophosphate, Anhydrous)

Tetrapotassium Pyrophosphate, Anhydrous

TKPP is a highly soluble, more environmentally friendly, low sodium alternative to SAPP. Disperses/ deflocculates clay mixtures in drilling muds.

Drilling Unbleached Lecithin Yelkin TTS Enhances emulsion, suspension and dispersion in oil based drilling fluids/mud.

Drilling Water based Organoclay Rheological Additive

BK 882 Provides good thixotropy and stability to give crude oil and diesel systems good suspension property, wall protection and anti-filtration.

FUNCTION PRODUCT TRADENAME

Drilling (continued)

Oilfield 5

FUNCTION PRODUCT TRADENAME

Fracturing (continued)

Fracturing Ceramic spheres Seal-N-Slide Proppant - Application suited for shale sweeps. Effective in lowering HTHP fluid loss and helps reduce seepage losses while drilling. Alternative to calcium carbonate. Compressibility strength of Seal-N-Slide makes it a great choice to be used in systems that are being moved from well to well with no reconditioning.

Fracturing Defoamers, Siloxane Foamblast High viscosity, antifoam- silicone based, control of foam in H2O based hydraulics, soluble oils and semisynthetic fluids. Cementing sealer.

Fracturing Distilled Tallow Fatty Acid Voleic product range Biodegradable emulsifier.

Fracturing Friction Reducer & Proppant Carrying Fluid

MM 200, 201, 300 Rapidly Hydrating Polymer for Frac . MM200 and MM201 (brine version) is a combination friction reducer and viscosifier blend that hydrates rapidly. Used for Fracturing and as FR for stage plug drillout with stick or coil. MM 200 performs significantly well compared to other polymers in cold frac water. Hydrates in less than 10 seconds at 33°F while maintaining its proppant carrying and friction reduction properties. MM 200 at higher dosages (0.3-0.5%) will suspend sand. Therefore only one chemical is required ...don’t have to switch from FR to Guar. In hot wells, MM 200 & 201 remains stable at temperatures above 300°F. Both products can be broken with standard breakers.

Fracturing Fumed Silicate CAB-O-SIL TS 610 Used as a thixatrop thickening foaming fracking fluids to carry proppants.

Fracturing Glycerine Glycerin 99.5% Glycerin can be used as a component in completion fluids and fracture fluids. Glycerin can be reacted to make polyglycerols for drilling muds formulated for shale stabilization.

Fracturing Glyoxal 40% / Ethandial Glyoxal 40% Glyoxal crosslinks polymers therefore increasing viscosity of fracturing fluids.

Fracturing Hydrating Polymers Activator A Viscosifier for problematic polymers . High performance activator for building viscosity in following conditions: high salt brines, crude / water oil, cold water, compromised slurry design, compromised equipment with poor shear rate.

Fracturing Hydrogenated Coconut Fatty Acid

Hydrogenated Coconut Fatty Acid

Biodegradable emulsifier.

Fracturing Lactic acid Lactic acid 88% Heat Stable Can be used as a crosslinking agent for polymer gels. Removal of carbonate or iron scale in oil equipment. High temperature applications.

Fracturing Low Viscosity oil HY40 Fracturing Fluid. Suitable for wide range of application temperatures.

Fracturing Microemulsion, Enhanced Flowback and Shale Stabilizer

RTN PLS X-15 Water-wetting version is presumed product of choice for the Bakken and other EOG crude producing formations. Improves flow through perforations where a water or emulsion block is suspected. Benefits include increased fracture length by improving pressure efficiency, improved conductivity (clean, unobstructed fractures, speed cleanup and increased polymer recovery. Rtn Pls X-15 successfully runs at lower dosages (0.25 gpt) still delivering water recoveries comparable to alternative products at 0.2 % gpt. This product has an excellent clay stabilizer as part of it’s makeup as well as an anti-foamer.

Fracturing Oleic Acid Oleic Acid Oleic acid as its sodium salt is a major component of systems as an emulsifying agent.

Fracturing Oxyaluminum Octoate OAO Rheology modifier. Enhance rate of fluid gelation. Encapsulated breaker for oil gels slick frac fluid.

Oilfield 6

FUNCTION PRODUCT TRADENAME

Miscellaneous

Miscellaneous Dioctyl Sebacate Monoplex DOS Strip coating, film and sheeting for low temperatures Ester type plasticizer, excellent viscosity stability, excellent at low temperatures.

Miscellaneous Propylene Glycol Propylene Glycol Industrial Grade

Used to reduce hydrate formation, typically ice formation within gas streams during the processing of natural gas. Drilling Fluid Testing used to test oil based drilling fluid by breaking the emulsion.

Miscellaneous Solvent borne adhesive Thixon range Vulcanized metal primer systems. Rubber to metal bonding agents for stator components used in progressive cavity pumping systems, valves and tanks.

FUNCTION PRODUCT TRADENAME

Industrial Cleaning

Industrial Cleaning Green Wellbore Cleaning Spacer

CleanVoc Water-wetting product that dominates the interface. Prevents hydrocarbons from depositing. Will remove sludges, including barite, bentonite and residuals from oil based muds.

Industrial Cleaning Laureth Carboxylic Acid Akypo RLM 45CA Akypo RLM100

Organic acid acts as a concentrated surfactant. Enables formulations with various neutralization agents. Combined benefit of non-ionic and anionic surfactants. Enhances efficiency of Quats.

FUNCTION PRODUCT TRADENAME

Fracturing (continued)

Fracturing Polyethylene glycol Pluriols PEG reduces the aggregates and nonomaterials (such as glass beads, silica, iron) affinity for aggregation and improves their transport through porous media.

Fracturing Polysorbates-ethoxylated sorbitan fatty acid ester

T-Maz Dispersants, corrosion inhibitors. For oil in water and water in oil emulsification needs, often used with S Maz. Used as stabilize and dispersing agent.

Fracturing Sodium Lactate 60% liquid Arlac S Can be used as a crosslinking agent for polymer gels. Removal of carbonate or iron scale in oil equipment. High temperature applications.

Fracturing Sodium Xylene Sulfonate Sodium Xylene Sulfonate Anionic surfactant used as a solubilizer, coupling agent, viscosity reducer. Offers good lubricity and heat resistance.

Fracturing Sorbitan Fatty Acid Ester/ Sorbitan Monooleate (SMO)

S-MAZ 80K / SMO Oil slick dispersant.

Fracturing Wellbore Sweep Fluid Maxim Sweep Multifunctional Wellbore Sweep- Maxim Sweep is designed to keep horizontal section clean, even under high temperatures. Maxim allows for wellbore integrity by preventing shale hydration caused by water movement into the rock, voids and micropores. Maxim maintains the integrity of the cuttings, allowing them to be removed by solids control equipment, thus maintaining the quality and efficiency of the system. This lubricant acts as an excellent corrosion inhibitor and oxygen scavenger. If tripping or shutting a well for some time, Maxim Sweep will keep barite suspended.

Oilfield 7

FUNCTION PRODUCT TRADENAME

Production

Production 2-alkyl branched fatty alcohol Farmin line Primary and Tertiary amines,Vegetable and Tallow based primary amines, Vegetable based Tertiary amines: C8 to C18 and C22 Alkyl Dimethyl Amines, selected Di Alkyl Methyl amines.

Production 2-alkyl branched fatty alcohol Kalcol line Guerbet alcohols act as a co-solvent or coupling agent to improve the solubility of highly polar substances in mineral oil or improve the stability of dispersions/emulsions. Can be used as a “green” winterizing agents (solvent) having very low melting points compared with linear C20 and C24 counterparts (respectively).

Production Broad Range Scale Control Agent

LVL Scale 2920 Scale deposit control developed as a Calcium Carbonate and Barium Sulphate scale inhibitor for use in high temperatures (to 250°F).

Production Calcium Carbonate Deposit Control Agent

LVL Scale 2940 For severe potential calcium carbonate scale formation in challenging environments (>250F pH, levels >9.0, Iron tolerant, thermally stable). Ideal for H2S Scavenger applications in high Calcium waters.

Production Calcium Chloride Powder 94% Calcium Chloride Powder 94% Calcium Chloride HT Powder 94 % has a wide variety of oilfield uses; Salinity source in oil muds, flocculant for clear water drilling, packer fluid, accelerator for oil well cement.

Production DDBSA, Sulphonic Acid - Linear Alkylbenzene Sulfonic Acid

DDBSA - Linear Alkylbenzene Sulfonic Acid

DDBSA is an anionic surfactant. Used as antisludge additive/ emulsion breaker and paraffin dispersant. Is biodegradable and environmentally friendly as it has a straight chain structure.

Production Dimerized fatty acids Unidyme 60 & 60 Special, Unidyme 35,18

Corrosion Inhibitor base.

Production Iron Control LVL Iron Control 1806 Iron Control. Blend achieves a unique combination of Iron fouling control as well as contributes to scale inhibition and reducing corrosion in oilfield fluid systems. Prevents Iron Sulphide and Iron Oxide deposits.

Production Laureth Carboxylic Acid Akypo line Oxidation-stable emulsifier based on ethercarboxylic acid. Excellent emulsifier with good wetting properties. Hard Water stability. Intensifies the corrosion protection in alkaline media.

Production Metal Foul & Scale Control LVL 860D Metal Foul &Scale Control

LVL 860D is a specialty solid product for oilfield systems where Iron fouling and Corrosion are of primary concern. Inhibition of Iron Oxide and Iron Sulphide deposits have been achieved with treatment of LVL 860D, as well as substantially reduced corrosion rates.

Production Multi-Functional Paraffin Inhibitor

LVL Para 700 Designed difficult and challenging oilfield systems with severe potential for paraffin formation.

Production Propargyl Alcohol Propargyl Alcohol Corrosion Inhibitor often used in stimulation formulations.

Production Scale and Metal Control LVL 810D Scale and Metal Control

LVL 810D is a specialty solid product for oil and gas wells where Iron fouling and Corrosion are of primary concern. Inhibition of Iron Oxide and Iron Sulphide deposits have been achieved with treatment of LVL 810D, as well as substantially reduced corrosion rates.

Production Scale/Corrosion Inhibitor LVL 904D Scale/Corrosion Inhibitor

LVL 904D - is a “slow-release” form of scale / corrosion inhibitor developed for use in fracturing applications. It has shown excellent product lifetime and effectiveness and can be considered another method to deliver product for wells where dosing liquids may not be ideal and minimal manual servicing is desired.

www.lvlomas.com 800 575 3382 LIMITED / LIMITÉE

Proudly representing our Principal Partners in the Industrial Oils industry

NATURAL-RESOURCES-OILFIELD-AUGUST-2014