okm fully stainless-steel 54 hm hybrid · es 650: es 6506, es 6507, es 6508, es 6509, es 6510...
TRANSCRIPT
Leesonmech Engineering (M) Sdn. Bhd.
Brand SPECKModel ES 650Material CI / CI / SSSealing Mechanical SealPump Speed 2900 RPM, 3500 RPMMaximum Pressure 63 barBearing The pump is led by 2 externally located bearingMax. Temperature
Water 105C (Gland Packing)/ Water 120C (Mech. Seal)Application Boiler feed water pump
SPECK Multistage Pump PN63
Description
Application:
1. Boiler feed water pump2. Delivery of hot water in boiler systems3. Water supply nits 4. Sprinkler units 5. Cleaning stations6. Recovering of condensates (water)7. Extracting palm oil
ES 650: ES 6506, ES 6507, ES 6508, ES 6509, ES 6510
Features:
1. Horizontal, multistage, single-entry centrifugal pumps with radialimpellers in modular design with radial inlet and radial outlet.
2. Mechanical seals are in accordance with EN 12756 and are in SiC,carbon and FKM design.
3. The rotating direction of motor is clockwise seen from the motordrive to the pump.
4. Maximum temperature:
Water 120 degrees C (Mechanical Seal)
Brand OKMModel 54HM Hybrid ValveNominal Size 6"/ 8"/ 10"Body/Disc SCS13Stem SUS630Seat Ring SUS304Flange JIS 10K/ANSIMaximum Temperature -50-230 degree CMaximum Pressure 0.5MPaActuator Min. Air Supply 6 bar
OKM Fully Stainless-Steel 54 HM HybridValve
Description
Application:
RefiningIndustrial GasesPulp and Paper
1 of 34
HVACWater and WastewaterChemical and Petrochemical Palm Oil
1. High performance valves for sterilizer system.2. Specially designed for heavy duty service at sterilizer condensate
process.3. Application in condensate process at sterilizer system.
Features:
High DurabilityHybrid Valve is wear-resistant against abrasive flow media.
Solid Seat RingOKM original seat ring has high wear resistance and seal performance.
Disc PerformanceWhen in full opened position, disc is parallel with flow direction and notdamaged by the abrasive flow media.
Double Eccentric StructureDouble eccentricity of the disc ensures longer service life, low seatingtorque and leak shut off.
Brand OKMModel 54TP/54MPNominal Size 80-300mmBody/Disc SCS13AStem SCS630Seat Ring PTFE(white)PTFE(black)/SCS14Flange JIS5K/JIS10KMaximum Pressure 10 barsMaximum Temperature -50-230 degrees C
OKM 54MP/54TP Butterfly Valve
Description
Application:
Cooling water, air, gases, fire protection etc.Slurry and similar servicesVacuum servicesHigh-pressure and high-temperature water and steam servicesCompressed Air or Gas Applications Palm Oil
1. Sterilizer Steam Exhaust Valve2. Sterilizer Steam Inlet Valve3. Sterilizer Condensate Valve
Features:
1. Self-sealing mechanism for tight shutoff.2. Double eccentric disc for longer service life, low seating torque and
leak-tight shutoff.3. Actuator: Lever, Worm-Gear, Pneumatic-Cylinder, Electric-Motor
Brand OKMModel 616Nominal Size 50-300mmBody Ductile IronDisc SS304/SS316Stem SUS403Seat Ring EPDM, NBRFlange JIS 5K, 10K ASME/ANSI 125LB, 150LB
OKM 616 Butterfly Valve
2 of 34
Max. Service Pressure 10 barMax. Service Temperature 0-120 degrees CApplication
Construction Equipment, High rise buildings, generalindustries, palm oil mill
Description
Applications:
1. Regulate flow of water cooling, gases, liquid, air and fireapplications.
2. Waste water and similar services3. Vacuum applications4. Paper and pulp5. Heavy pressure and higher temperature application area.
Brand OKMModel Double Acting/ Single ActingOperating Mechanism Scotch-YokeOperating fluid Compressed Dry AirOperating Pressure 4 bar - 7 barOperating Temperature -20 ~ 80 degrees C
OKM Pneumatic Actuator
Brand OKMModel 612XC/615XCNominal Size 40-300mm/ 350-1200mmBody Ductile Iron/ Cast IronDisc SS304/SS316Stem SUS420 J2Seat Ring EPDM(Chemical Resistant) NBR (Oil Resistant)Flange JIS 5K, 10K ASME/ANSI 125LB, 150LBMax. Service Pressure 10 barMax. Service Temperature 0-120 degrees CApplication Biogas
OKM 612X/615X Butterfly Valve (EpoxyCoating)
Description
Application:
1. To control the flow of palm oil mill effluent or biogas.2. For auto shut off before burner
Features:
1. Sand blasted and fusion bonded powder epoxy coating for biogasapplication.
3 of 34
Brand OKMModel 612XC/615XCNominal Size 40-300mm/ 350-1200mmBody Ductile Iron/ Cast IronDisc SS304/ SS316Stem SUS 420 J2Seat Ring EPDM, NBRFlange JIS 5K, 10K ASME/ANSI 125LB, 150LBMax. Service Pressure 10 barMax. Service Temperature 0-120 degrees CApplication
General Industry, Air conditioning systems, palm oil mill,marine
OKM 612X/615X Butterfly Valve
Description
Features:
1. Unique new OKM soft-touch seat for lower torque and longerservice life.
2. Lower torque results in lighter and smaller actuator. 3. FCD450 as body material.
Brand SPECKModel ES-320/ ES-400/ ES-500/ ES-650Material CI/CI/SSSealing Gland Packing/ Mechanical SealPump Speed 2900RPM, 3500 RPMBearing The pump is led by two externally located bearings.Max. Pressure 40 barMAX. TEMPERATURE
Water 105C (Gland Packing)/ Water 120C (Mech. Seal)APPLICATION Boiler feed water pump
SPECK Multistage Pump PN40
Description
Application:
1. Boiler feed water pump2. Delivery of hot water in boiler systems3. Water supply nits 4. Sprinkler units 5. Cleaning stations6. Recovering of condensates (water)7. Extracting palm oil
ES-320: ES 3204, ES 3205, ES 3206, ES 3207, ES 3208, ES 3209
ES-400: ES 4004, ES 4005, ES 4006, ES 4007, ES 4008, ES 4009
ES-500: ES 5004, ES 5005, ES 5006, ES 5007, ES 5008
ES-650: ES 6504, ES 6505, ES 6506, ES 6507
Features:
1. Horizontal, multistage, single-entry centrifugal pumps with radialimpellers in modular design with radial inlet and radial outlet.
2. Stuffing box packings are in PTFE and graphite design. 3. Mechanical seals are in accordance with EN 12756 and are in SiC,
carbon and FKM design.4. The rotating direction of motor is clockwise seen from the motor
drive to the pump.5. Maximum temperature:
Water 120 degrees C (Mechanical Seal)
4 of 34
Water 105 degrees C ( Gland Packing Seal)
Brand SPECKModel ASKGSeries
ASKG200, ASKG320, ASKG330, ASKG400, ASKG500,ASKG650
Sealing Mechanical SealPump Speed 1450 RPM, 1750 RPMMaximum Temperature 180 degrees CMax. Pressure 40 bar (580 psi)Material CI/ SS/ SS *Application
Palm oil, boiler feed water, condensates, distillates, liquidgas, coolants, solvents
SPECK Side Channel Pump
Description
Heating and Cooling Technology
1. Delivering cooling brine2. Filling and emptying thermal oil systems
Energy Technology
1. Delivery and circulation in closed circuits2. Feeding boilers in boiler systems and steam generators 3. Tank systems, including delivering liquid gas 4. Delivery of diesel in backup generators in power stations
Chemical & Pharmaceutical Industry
1. Delivering aggressive, highly flammable and toxic media2. Recovery of condensates, e.g. solvents
Application
1. Oil transfer pumps/ Dried oil pumps ( Palm Oil Industry) 2. Delivery of hot water in boiler systems3. Recovery of condensates ( water) 4. Delivery of liquid gas 5. Food, beverages and tobacco industry
Features:
1. Design for feeding, filling and emptying operations under difficultphysical conditions
2. Suitable for the delivery of gas/ self-priming3. Suitable for liquids without abrasive contaminants without solid
particles 4. Wide temperature range from -100 Celcius up to 350 Celcius.
Brand SPECKModel VH/ VU/ VZMaterial CI/ BR/ SSSealing Mechanical SealVacuum 27" Hg
SPECK Liquid Ring Vacuum Pump
Description
Application:
5 of 34
Food, Beverage and Cosmetic Industries
1. Filling bottles with beer, mixed beverages, mineral water and othersimilar fluids
2. Vacuum cutters3. General processes such as degasification, extraction, suction and
vacuum cooking 4. Milking systems5. Curing systems6. Production of sugar and chocolate7. Production of emulsions and suspensions
Chemical & Pharmaceutical Industry
1. Distilling and separation of liquids 2. Recovery of condensates, e.g. solvents3. Drying of bulk solids, e.g. washing power, fertilizers, salts, plastic
granules and more.4. Extracttion of liquids, e.g. palm oil, soy bean oil
Medical Engineering
1. Sterilization with laboratory and clinical sterilizers
Plastic Production and Plastics Processing
1. Extruder degasification/ degassing pumps 2. Manufacturing of EPS molded parts 3. Drying of plastic granulate4. Decontamination in PET recycling processes
Palm Oil
1. Moisture removal from crude palm oil in the vacuum dryer.
Features:
1. Double-stage, without valves, with mechanical seal.2. Comes with anti-cavitation valve and auto draining valve.3. Can be used universally for compressing practically all gases and
vapors.4. Constant suction performance for difference applications5. Mechanical seal, magnetic coupling or packing gland6. Application-specific selection of materials like grey cast iron,
stainless steel or special alloys 7. ATEX certified
Brand SPECKModel TRIPLEX PumpsWorking Pressure Up to 1200 barDelivery Rate 650 liters/minPower Consumption Up to 150 HP (110kW)Type of Drive
Direct Coupling, Belt Drive, Reduction (Step Down) GearFluid Media
Desalinated Water, Drinking Water, Emulsions, Fuels, Oils,Alcohols, Acids, Caustic Solutions, Beer, Wine, Milk and
moreMedium Temperature -25 ~ 110 degrees C
SPECK Triplex High Pressure Pump
Description
Application:
1. OsmosisDialysis WaterLandfill Seepage WaterElectroplating TreatmentIndustrial WastewaterSeawater DesalinationDrinking Water Production
6 of 34
Refinery boiler feed application
2. Air Humidification/ MistingAnti-Static UnitsFertilizer plants, Irrigation systemsPrinting industry/ paper industryFire ExtinguishingPlant growthLivestock FarmingTunneling, Mining, Dust Binder
3. High Pressure Cleaning
Floor washers, facade cleaning, building cleaningHigh pressure cleaner (mobile/ stationary)Sewer cleaning, pipe cleaning, street cleaningCleaning equipment industrial and food sector Tyre/Wheel washers, tank cleaningPre-Spray wash bays, Pre-spray wash unitsHeat Exchangers
Triplex Pump Catalog can be found in E-catalog.
Brand SP PUMPType Simplex/ DuplexMaterial Stainless-SteelPressure 300-500 psiCapacity 30-120 liter/hourMotor 0.5HP, 415V, 3 phase, 50 Hz
Chemical Metering Pump
Description
Applications:
1. For precise and specified volumes of chemical to treat water forboiler feed applications.
2. Injection of precise volumes of flocculants for coagulation of solidout of liquid
3. Injection of acid or chemical to treat water or kill bacteria 4. Agriculture, industrial, manufacturing, medical, food processing and
mining.
7 of 34
Brand SPECKType Regenerative turbine pumps
SPECK Small Pumps Shaft Sealing
Description
Medical Appliances
Water FeedingDisinfectionLaser cooling
Welding machinery
Cooling of welding pistols
Railcars
Transformer coolingDrinking water supplyWaster water supplyFuel supplyElectronic cooling
Aerospace equipment
Fuel supplyIndustrial water supplyTemperature controllersProcess temperingProcess cooling
Drink dispensers Drink coolingBottle fillingRecirculation of drinks
Industrial and mechanical engineering Laser / process/ switchboard coolingboiler feedingwater treatmentwashing and cleaningserver coolingextrusion technology
Automobile technologyHeating and air conditioningbattery coolinggear coolingfuel supply
Brand SPECKType Regenerative Turbine Pumps
SPECK Small Pumps Magnetic Coupling
Description
Applications:
1) Medical Appliances
Water Feeding
8 of 34
DisinfectionLaser coolingBiotechnology Pumps Pharmaceuticals Process Pumps Low Shear Pumps
2) Welding machinery
Cooling of welding pistols
3) Railcars
Transformer coolingDrinking water supplyWaster water supplyFuel supplyElectronic cooling
4) Aerospace equipment
Fuel supplyIndustrial water supply
5) Temperature controllers
Process temperingProcess cooling
6) Drink dispensers
Drink coolingBottle fillingRecirculation of drinks
7) Industrial and mechanical engineering
Laser / process/ switchboard coolingboiler feedingwater treatmentwashing and cleaningserver coolingextrusion technology
8) Automobile technology
Heating and air conditioningbattery coolinggear coolingfuel supply
9 of 34
Brand SPECKModel TOE-GN/ TOE-GA/ TOE-GIMedium Thermal Oil/ Hot WaterNominal Pressure PN 16/ EN733Casing Material Spheroidal graphite cast ironATEX II 3G c TXMax. Operating Temperature
-40~ 350 degrees C in thermal oilMax. Operating Temperature 180 degrees C in hot waterMaximum Head 100 m at 2900 RPMMaximum Capacity 550 m3/h at 2900 RPMUsage
For the transport and recirculation of hot water, organic orsynthetic heat transfer oils in heat transfer plants according
to DIN 4754. Suitable for media to be pumped with little non-abrasive contaminations.
SPECK Heat Transfer Pumps
Description
Applications:
1. Tempering in plastics and die cast industry.2. Baking ovens, large frying units as well as in the production of
edible oils and dry masses for the food and feedstock industries.3. Heating calenders and melting pots in leather and rubber industry.4. Heating stirring and mixing vessels in the production of paints and
varnishes.5. Heating tank storage facilities on stationary and FPSE platforms as
well as tankers. 6. Heating press lines in the wood and pulp industry.7. Flat glass production 8. Solar power stations and ORC processes.
Features:
1. Robust Design
Wear resistant SiC sleeve bearingsImpeller with back vanes reduce axial thrust and remove strain frommechanical seal and ball bearings
2. Optimized for synthetic heat transfer oil
Dry-run safety function for mech. sealOptimized cooling of ball bearings, mech. seal and sleeve bearings.Centerline mounting relieves strain from bearings and coupling
Brand SPECKModel VHC SeriesMedia Dry and humidified gasOperating Liquid Max. 80 degrees CMinimum inlet pressure
33 mbar abs/ 5mbar abs with gas ejectorsFlow Rate 110-1600 m3/hMaterial Design SS CI Copper AlloySealing
Mechanical Seal/ Packing Gland/ Magnetic Drive/ SeparatingCan
[NEW] VHC Liquid Ring Vacuum Pumps
Description
Feature:
1. Two-stage pumps in base plate version with B3 standard
10 of 34
2. Sound pressure level 66-79 db(A)3. ATEX Certified 4. Application-specific selection of materials like grey cast iron,
stainless steel or special alloys.
Application:
1. Sterilization of surgical instruments, textiles and beds.2. Extruder degasification for plastics industries.3. Degasification of toothpaste, cremes, lotions and marzipan.4. Extraction of condensates for the production of sugar, sugar-based
sweets, fruit juice/pulp, jam.5. Vacuum cooking of fruits, vegetable, pulps and mush.6. Thickening and crystallization of sugar under vacuum.7. Drying of bulk material such as washing powder, fertilizer, salts,
granular polymer.
VHC is a new liquid ring vacuum pump technology developed from thereliability of VH series and customer requirements of safety, durability andinnovation.
VHC catalog can be downloaded from resources page!
Brand SWECOModel MA 60 8108 Double Deck Separator (Double Entry)Construction Body -SS 304 ConstructionMotor 2.5 HP, 50 Hz 1450 RPM, TENV Type, 415VScreen Size 8mg or 10mgApplicaition
Separation of kernels and shells from water in the palm oilmill
SWECO Double Separator (Claybath)
Description
Application:
1. Claybath
After claybath separation of shells and kernels. This SWECO Tripledeck separator separates kernels and shells from water.
Original Spares
Spare ScreensMotor SpringChannel Gaskets (Neoprene, Hycar & STP)FramesBearings
Features:
1. Double deck vibrating separator with extra discharge outlet.
Brand SWECOModel MA 60 888 Double Deck SeparatorConstruction Body- SS 304 ConstructionMotor 2.5 HP, 50 Hz 1450 RPM, TENV Type, 415VScreen Size 8mg~10mg
SWECO Double Deck Separator
Description
Application:
1. Crude Oil (Press Station)
11 of 34
Original Spares
Spare Screens Motor SpringChannel Gaskets (Neoprene, Hycar & STP)FramesBearings
Brand SWECOModel MA 60 88 Single Deck SeparatorConstruction SS 304 ConstructionMotor 2.5HP, 50 Hz, 1450 RPM, TENV TypeMesh Size 10mg~30mg
SWECO MA 60 88 Single Deck Separator
Description
Application:
1. Sludge (Oil Room)2. Empty Fruit Bunch (EFB) Juice3. Biogas Plant4. Sterilizer Condensate
Original Spares
Spare ScreensMotor SpringChannel Gaskets (Neoprene, Hycar & STP)FramesBearings
Brand SP PUMPType Slurry Handling PumpMATERIAL CA15/CA15/SS304*FLOW RATE 0-300m3/hrHEAD 3-70mSPEED Variable Speed (50Hz or 60Hz)MAX. TEMPERATURE 100 degrees CMAX. WORKING PRESSURE 16 barImpeller Semi-open
SPB Slurry Handling Pump
Description
Application:
1. Palm Oil Mill Application Effluent Transfer 2. Waste Water Treatment3. POME transfer 4. Sludge Oil 5. Hydrocyclone
* All stainless-steel, wetted parts model is available upon request.
12 of 34
Brand SP PUMPType Slurry Handling PumpMaterial CA15/CA15/SS304*FLOW RATE 0-250m3/hrHEAD 0-100mSpeed Variable Speed (50Hz or 60Hz)MAX. TEMPERATURE 100 degrees CMAX. WORKING PRESSURE 16 barImpeller Semi-open
SPA Slurry Handling Pumps
Description
Application:
1. Palm Oil Mill Application2. Effluent Transfer 3. Waste Water Treatment4. POME transfer 5. Sludge Oil 6. Hydrocyclone
* All stainless-steel, wetted parts model is available upon request.
Brand SP PUMPModel SPHMaterial CA15/ SS304/SS316*Flow rate 10-200m3/hrHead 3-70mPump Speed Variable Speed (50Hz or 60Hz)Max. Temperature 100 degrees CMax. Working Pressure 16 bar
SPH Self Priming Pump
Description
Application:
1. Effluent transfer2. Waster water treatment3. POME transfer 4. Sludge Oil5. General Applications
Features:
1. Designed for delivery and recirculation of mild corrosive dirty waterand light slurry.
2. Suitable for operation when the suction pipe is empty, as selfpriming pump is able to draw water up the suction line.
*All stainless-steel model available upon request.
13 of 34
Brand SP PUMPModel SPNCMaterial CI/CI/SS*Sealing Mechanical SealWorking Temperature 120 degrees CFlow Rate 10-100m3/hrPump Head 5-25mMax. Working Pressure 16 barPump Speed 1450RPM, 1750RPM
SPNC Deaerator Pump
Description
Application:
1. Vacuum deaerator extraction of hot water 2. Basic process engineering3. Chemical Industry
Features:
1. Designed for delivery and recirculation of liquids at unfavorablesuction-side conditions and liquids close to boiling point.
2. Suitable for liquids without abrasive contamination and without solidcontent.
3. Shaft sealing with mechanical seal.4. Volute casing in cast iron with nominal pressure PN16.5. Common model consists of SPNC 65-250, SPNC 80-250.
* all stainless-steel model available upon request.
Brand SP PUMPModel SPVImpeller Type Closed ImpellerMaterial CI/CI/SS420*Sealing Mechanical SealWorking Temperature 105 degrees C (depending on seal)Flow Rate 3-2200m3/hrPump Head 3-150mMax. Working Pressure 16 barPump Speed 1450RPM, 2900 RPMApplication Water transfer or boosting
SPV Centrifugal End Suction Pump
Description
Application:
1. Water transfer or boosting2. Fire fighting3. Air Conditioning4. Chillers5. Irrigation6. Recirculation7. General Applications
Features:
1. Volute casing in cast iron of stainless steel with nominal pressurePN16
2. Back pull out design- single entry centrifugal pumps with volutecasing in process design.
* All stainless steel model available upon request.
14 of 34
Brand YASIKINominal Size DN15~DN500 *Materials SS304, SS316Connection
Threaded BPST, JIS 5K/10K/20K, ANSI 150/300,PN10/16/40
YASIKI Flexible Hoses and ExpansionJoints
Description
Optional Features:
Customizable Flange MaterialsMild Steel, A105, A216WCB, SS304, SS316Tie-Rods for ReinforcementCustomizable Overall Length (OAL)
*Larger Sizes Available on Indent
First and Second Stage Precleaner
Brand MEIDINGERBlower Type Centrifugal Type- Single Stage or Double StageEx-Protection ATEX II 2G/3G c IIA T1Pressure 300mbarFlow Rate 5000 m3/hrCasing Material Cast Iron*Impeller Material Aluminum*Max. Blower Speed 5800 RPMSealing Shaft Seal FPMMotor Installation Direct DriveEx- Proof Motor Ex-nA/Ex-e/ Ex-de
MEIDINGER Explosion Proof ATEX BiogasBlower
Description
Application:
1. Transportation of biogas such as methane for flare tower burning orpower generation.
2. Transportation of explosive gases or vapors, corrosive or toxicgases, hot exhaust gases and dust for food application,pharmaceutical applications and tunnel ventilation.
15 of 34
Features:
1. ATEX Fan for Zone 0, Zone 1, Zone 2 2. Explosion Proof Motor- Increased Safety, Non sparking and
Pressure Resistant3. Flat Characteristic Curve- constant pressure level at changing
volume flow, no VFD needed. 4. Low Noise- 10dB more silent than conventional welded impellers 5. Fast Startup6. Low Vibration, downtime and maintenance 7. Low Temperature Increase
* All stainless steel model available for request.
Brand MEIDINGERBLOWER TYPE
Centrifugal Type- Single Stage or Double StageEX-PROTECTION ATEX II 2G/3G c IIA T1PRESSURE 300mbarFLOW RATE 5000 m3/hrCASING MATERIAL Cast Iron*IMPELLER MATERIAL Aluminum*MAX. BLOWER SPEED 5800 RPMSEALING Shaft Seal FPMMOTOR INSTALLATION Belt DrivenEX- PROOF MOTOR Ex-nA/Ex-e/ Ex-de
MEIDINGER Explosion Proof ATEX BiogasBlower
Description
Application:
1. Transportation of biogas such as methane for flare tower burning orpower generation.
2. Transportation of explosive gases or vapors, corrosive or toxicgases, hot exhaust gases and dust for food application,pharmaceutical applications and tunnel ventilation.
Features:
1. ATEX Fan for Zone 0, Zone 1, Zone 2 2. Explosion Proof Motor- Increased Safety, Non sparking and
Pressure Resistant3. Flat Characteristic Curve- constant pressure level at changing
volume flow, no VFD needed. 4. Low Noise- 10dB more silent than conventional welded impellers 5. Fast Startup6. Low Vibration, downtime and maintenance 7. Low Temperature Increase
* All stainless steel model available for request.
16 of 34
Brand Forbes MarshallType Variable Nozzle/ Fixed NozzleSteam Side Flange 4" ~ 6"Water Side Flange 1" ~ 2"Max. Pressure Rating ANSI #2500Turndown Ratio 1:27 ( depending on nozzle)
Forbes Marshall Desuperheater
Description
Applications:
1. Desuperheaters are used to convert superheated steam tosaturated steam through direct addition of water, so that steam canbe used for sterilization processes in the palm oil mill.
2. Turbine Bypass and Exhaust Applications3. Turbine Bleed Steam, Auxiliary Steam, Process Steam, Attemerator4. Pressure Reducing Valve Outlet Steam Application5. Boiler Superheater and re-heater applications
Features:
1. Available in fixed nozzle design, minicooler deisgn or variablenozzle design.
Variable Nozzle Design
VND ensures a fine conical spray thatevaporates almostinstantaneously, avoiding pipe impingement.For 9 nozzle head= 1: 27 turndown ratioFor 6 nozzle head = 1:18 turndown ratioDesign as per ANSI B 16.34Graphite packing provided for optimal sealingwith stemSuitable to fit a variety of yokes. (ideal with -ForbesMarshall make pneumatic diaphragm actuator) Fabricated body - available in Carbon Steel /Alloy Steel /Stainless Steel (other materials available onrequest) Stem - ground, hardened and roller burnishedto a finefinish for optimum performanceEnsures back-seat sealing due to fine machiningandlapping of the seat after welding
Fixed Nozzle Design
Single nozzle Kv as low as 0.0162 m³ / hr andas high as1.6 m³ / hrNumber of nozzles limited only by pipelinediameterFor use on all pipe sizes 6" and aboveIdeal for use in conjunction with water controlvalve andcontrol system Turndown ratio upto 4:1 (depending on waterquality)
17 of 34
Brand Forbes MarshallSize 40NB, 50NB, 80NB, 100NB, 150NBRating ANSI 300, ANSI 600, ANSI 900Flange Standards Flanged- RFPlug Characteristic Linear, Equal PercentageLeakage Class IV (0-200 deg C)Body Material A216 WCBTop MOC A216 WCBTrim Material SS316Gasket GraphitePacking GraphiteSealing EPDM
Forbes Marshall Water Level Control Valve
Description
Application:
1. Used in conjunction with level transmitters, the Forbes Marshallboiler water level control valve modulates the amount of water thatenters the boiler.
Actuator Features:
1. Actuator Type: Diaphragm Pneumatic Actuator 2. Actuator Action: Air To Close/ Air to Open 3. Failure Position: Failed to Open/ Failed to Close
Positioner Features:
1. Make: Forbes Marshall 2. Model: 830 WP3. Action: Linear 4. Input Signal : 4-20mA
18 of 34
Brand Forbes MarshallModel Flowirl 8700Connection EN or ASME FlangeFlange Size 1/2" to 12"Wafer Size 1/2" to 4"Medium Liquids, gases, vaporsViscosity < 10 cPMax. Temperature 240 degrees CMaterial Fully Stainless- Steel Design
Forbes Marshall Vortex Flowmeter
Description
Features:
1. Accurate measurement of operating volumetric and mass flow.2. Integrated temperature and optional pressure compensation.3. Excellent long-lasting service life due to robust design.4. Easy startup.
Materials:
1. Sensor- 316L 2. Electronics Housing- Aluminum3. Sensor Gasket- 316L/ FPM Hastelloy C4/ FFKM
Brand Forbes MarshallSize 50 NB, 80 NB, 100 NB, 150 NBRating ANSI 300, ANSI 600, ANSI 900Flange Standards Flange-RFPlug Linear, PerforatedBody Material A216 WCB, A 217 WC6Top MOC A216 WCB, A 217 WC6Trim Material SS316/SS410 (Nitriding)Gasket GraphitePacking GraphiteSealing Viton
Forbes Marshall Pressure Control Valve(Make Up Valve)
Description
Actuator Features:
1. Actuator Type: Diaphragm Pneumatic Actuator2. Actuator Action: Air to Open3. Failure Position: Failed to Close 4. Accessories: Comes with Emergency Handwheel, Air Filter &
Regulator, Mist Separator
Positioner Features:
1. Make: Forbes Marshall EP Positioners2. Model: 830 WP3. Action: Linear4. Input Signal: 4-20mA
19 of 34
Brand Forbes MarshallSize 25NB, 40NB, 50NB, 80NB, 100NBRating ANSI 300, ANSI 600, ANSI 900, ANSI 1500Flange Standards Flanged-RFPlug Linear, PerforatedBody Material A216 WCB, A217 WC6Top MOC A216 WCB, A217 WC6Trim Material SS316, SS410 (Nitriding)Gasket GraphitePacking GraphiteSealing VitonSignal On-Off Type with Solenoid Valve 24 V DC
Forbes Marshall Auto Vent Valve
Description
Actuator Features:
1. Actuator Type: Diaphragm Pneumatic Actuator 2. Actuator Action: Air to Close 3. Failure Position: Failed to Open4. Accessories: Comes With Emergency Handwheel, Air Filter
& Regulator, Limit Switches
Brand YASIKINominal Size DN15~DN50Materials Bronze, SS304, SS316,Seat Material PTFE/ MetalConnection Threaded BSPT, NPTPressure Setting Range 0.5 up to 35 bar
Safety Relief Valves
Description
Optional Features:
With or without lever
Brand KINGSLEYType End Line/ In LineSize 15 NB to 300 NBBody Material
Cast Al LM6, Cast Steel ASTM A 216 WCB/ A351 CF8/ A351CF8M, Hastelloy, PTFE Lined
Bank Element SS 304, SS 316, Hastelloy-CGasket CAF, PTFE, FEP, Metallic Spiral Wound GraphiteBank Shell
Cast Steel, SS 304, SS 316, Hastelloy-C, A 351 CF8/CF8MNut Bolts
M.S Zinc Plated, ASTM A 193 B7/B8, A 351 CF8/CF8MApplication
To prevent flame from propagating inside the storage andtransportation systems carrying flammable liquid. These
arresters are designed to quench the flame and prevent firepenetration, explosion or detonation in the system
Kingsley Flame Arrestors
Description
21 of 34
Features:
1. Designed, manufactured & tested in accordance with variousNational & International standards such as BS 7244, EN 12874,ISO 16852, API 2000, IS 11006.
2. Kingsley Flame Arresters consist of a flame element made up of acorrugated metallic sheet tightly packed in the outer body providinga uniform Maximum Experimental Safe Gap for the effectiveprotection against flame.
Application: Deflagaration and Detonation Type
In Line Flame Arrestors ( First Image)
- Bi directional flame arrestors designed to provide minimum pressureloss and prevent flame propagation.
End of Line Arrestors ( Second Image)
- Installed at the end of pipeline or at the vent of storage tanks.
Brand KINGSLEYBody SS 304, SS 316, Hastelloy-C, PTFE LinedNozzle SS 316Pallet SS 304, SS 316, Hastelloy-CDead
The venting dead weight plate is assembled with a non-contact sealing material such as PTFE backed with soft
cushion Neoprene rubber sheetGuiding Rod with Nut SS 316Stopper Arm SS 316Locking Nut SS 316Stud M.S Zinc Plated, ASTM A 193 B7/B8, A 351 CF8/CF8M
Kingsley Emergency Vent
Description
How it works:
1. Emergency vents act as a secondary relief device to ensureprotection of storage systems against excess internal pressure inthe event that breather valves installed are not capable of relievingthe sudden rise in pressure.
22 of 34
Brand KINGSLEYSize 25 NB to 600 NBBody
Cast Al LM6, Cast Steel ASTM A 216 WCB, A351 CF8, A351CF8M, Hastelloy, PTFE Lined
Flame Element SS 304, SS 316, Hastelloy-CGasket PTFE, CAF, Graphite, PFAFlame Bank SS 304, SS 316, Hastelloy-CFastener
M.S Zinc Plated, ASTM A 193 B7/B8, A 351 CF8/CF8MApplication
Maintains desired pressure or vacuum inside storagesystems by allowing breath in and breath out mechanisms.
Use to prevent vapor loss, evaporation, over pressure ornegative pressure.
Kingsley Breather Valve
Description
Pressure Relief Valve (First Image)
Size 25NB to 600NB
Material of Construction: Cast Al LM6, Cast Steel ASTM A 216 WCB,A351 CF8, A351 CF8M, Hastelloy, PTFE LinedStem: SS 304, SS 316, Hastelloy, PTFE LinedPellet Guide: SS 304, SS 316, Hastelloy, PTFE LinedNut Bolts: M.S Zinc Plated, ASTM A 193 B7/B8, A 351 CF8/CF8MSeat :Cast Steel, SS 304, SS 316, Hastelloy-C, PTFE LinedPallet :Cast Steel, SS 304, SS 316, Hastelloy, PTFE LinedWeather Hood :Cast Steel, FRP mould, Aluminium, PFA Lined
Vacuum Relief Valve (Second Image)
Material of Construction Cast Al LM6, Cast Steel ASTM A 216 WCB,A351 CF8, A351 CF8M, Hastelloy, PTFE LinedSeat Cast Steel, SS 304, SS 316, Hastelloy-C, PTFE LinedVacuum Guide Cast Steel, SS 304, SS 316, Hastelloy-C, PTFE LinedStem SS 304, SS 316, Hastelloy-C, PTFE LinedGasket PTFE, CAF, Graphite, PFANut Bolts M.S Zinc Plated, ASTM A 193 B7/B8, A 351 CF8/CF8M
Pressure Vacuum Relief Valve (Third Image)
Material of Construction Cast Al LM6, Cast Steel ASTM A 216 WCB,A351 CF8, A351 CF8M, Hastelloy, PTFE LinedSeat Cast Steel, SS 304, SS 316, Hastelloy-C, PTFE LinedVacuum Pallet Cast Steel, SS 304, SS 316, Hastelloy-C, PTFE LinedPallet Stem Cast Steel, SS 304, SS 316, Hastelloy-CGasket/Packing PTFE, CAF, Graphite, PFAFastener & Stud M.S Zinc Plated, ASTM A 193 B7/B8, A 351 CF8/CF8MPressure Pallet Cast Steel, SS 304, SS 316, Haste Alloy-C, PTFE LinedDead Weight SS 316, SS 304, PTFE LinedBird Screen SS wire mesh, perforated sheetWeather Hood Cast Steel, Stainless Steel, PFA Lined
Breather Valve With Flame Arrester (Fourth Image)
Material of Construction Cast Al LM6, Cast Steel ASTM A 216 WCB,A351 CF8, A351 CF8M, Hastelloy, PTFE LinedSeat Cast Steel, SS 304, SS 316, Hastelloy-C, PTFE LinedVacuum Pallet Cast Steel, SS 304, SS 316, Hastelloy-C, PTFE LinedPallet Stem Cast Steel, SS 304, SS 316, Hastelloy-CGasket/Packing PTFE, CAF, Graphite, PFAFastener & Stud M.S Zinc Plated, ASTM A 193 B7/B8, A 351 CF8/CF8MPressure Pallet Cast Steel, SS 304, SS 316, Haste Alloy, PTFE LinedDead Weight SS 316, SS 304, PTFE LinedBird Screen SS wire mesh, perforated sheetWeather Hood Cast Steel, Stainless Steel, PFA Lined
23 of 34
Brand MACKCHAIN
Mackchain Solid Pin
Description
Application:
General Industries:
1. Agriculture2. Chocolate and confectionary3. quarrying and mining 4. Pulp and paper5. Baked goods6. Sugar mill, Timber Chains, Escalators
Palm Oil Application:
1. Conveyor chains for fresh fruit bunch ramps, sterilizer, fruit stripper,digester and press, nut separator and nut cracker.
Please refer to Downloads in the resource page for the productcatalog!
Brand MACKCHAIN
Mackchain Extended Pin
Description
Application:
1. Industrial heavy and duty conveyor chains and sprockets.
Please refer to Downloads in the resource page for the productcatalog!
Brand MACKCHAIN
Mackchain Hollow Pin
Description
General Industries:
AgricultureChocolate and confectionaryquarrying and mining Pulp and paperBaked goodsSugar mill, Timber Chains, Escalators
24 of 34
Palm Oil Application:
Conveyor chains for fresh fruit bunch ramps, sterilizer, fruit stripper,digester and press, nut separator and nut cracker.
Please refer to Downloads in the resource page for the productcatalog!
Brand ERIEZModel SuperpowerMagnetic Field 2-3"Thickness 2"Size 7"x12", 7"x14",7"x16", 7"x18", 7"x20", 7"x24"Application
To remove ferrous materials from palm nuts before crackingin the ripple mill.
ERIEZ Permanent Magnet
Description
Features:
1. All stainless- steel design for corrosive resistance.2. Standard hinged units include heavy duty stainless steel hinge, zinc
plated latch and latch mounting hardware for simple installation andeasy maintenance.
3. Welded Construction.4. Unique tapered step helps hold tramp iron out of t he product flow
to minimize wash off.
Brand ERIEZModel 26C/36C/46CCapacity 4/7/11 tonne/hourMax. Operating Temperature 54 degrees CCapacity 4/7/15 tons/hourPower Supply 115V, 60 Cycle, Single PhaseApplication
To control the feed rate of palm nuts to the ripple mill forcracking.
ERIEZ Vibratory Feeder
Description
Mild Steel Tray Size
26C: 9" Width x 16" Long36C: 12" Width x 20" Long46C: 14" Width x 24" Long
Features:
Patented ERIEZ HI-VI Magnetic Drive CircuitPowered by opposing and attracting magnetic forces, this feeder feedsbulk materials from micron size to bulky chunks with no sliding or rotatingparts, ensuring low power consumption, low maintenance andunparalleled accuracy.
Simple ControlsExcellent linearity is achieved by varying the voltage to the feeder withEriez AC circuit.
EncapsulationCoil and magnet in ERIEZ drive unit are encapsulated in epoxy,
25 of 34
eliminating coil movement.
Brand ERIEZModel Super B Model TrapsNominal Size 2", 3", 4"Material Stainless SteelApplication
To remove ferrous materials from crude palm oil before thevibrating separator.
ERIEZ Permanent Magnetic Traps
Description
Features:
1. The magnetic element, consisting of a group of magnetic tubes, isarranged to cause the material flow entering the body to impingeagainst the tubes and filter through the magnetic field, completelycovering the open area.
2. Cast type 316 stainless steel body, SS316 cover plate, SS304magnetic fingers, nitrile gasket and NPT pipe threads.
Brand YASIKINominal Size DN15~ DN300Materials:
Cast/Ductile Iron, A216WCB Cast Steel, SS304, SS316,Brass, Bronze
Flange Standards JIS10K/20K, ANSI 150LBS, PN10/16
YASIKI Piston Lift Check Valves
Brand YASIKINominal Size DN15~DN300Materials
Cast/Ductile Iron, A216WCB Cast Steel, SS304, SS316Seat Material PTFE /RPTFE /PPL /PEEKFlange Standards
JIS 10K/ 20K, ANSI 150/300/600LBS, PN10/16
YASIKI Flanged Ends Ball Valve
Description
Optional Features:
ISO-Mounting Pad ISO5211Lever, Gear, Pneumatic/ Electric Operated
Brand YASIKINominal Size DN15~DN300Material
Cast/Ductile Iron, A216WCB, Cast Steel, SS304, SS316Flange Standards
JIS 10K/20K, ANSI 150/300/600LBS, PN10/16
YASIKI Flanged Globe Valves
26 of 34
Description
Optional Features:
Rising / Non-rising stem
Brand YASIKINominal Size DN15~DN300Materials
Cast/Ductile Iron, A216WCB, Cast Steel, SS304, SS316,Brass, Bronze
Connection Type Threaded BPSTFlange Standards
JIS10K/20K, ANSI150/300LBS, PN10/16/40
YASIKI Y-Strainer
Description
Features:
1. Customizable Screen2. Mesh Perforation Sizes
Brand YASIKINominal Size DN15~DN300Materials
Cast/Ductile Iron, A216WCB, Cast Steel, SS304, SS316,Brass, Bronze
Flange Standards JIS10K/20K, ANSI 150LBS, PN10/16
YASIKI Cast Steel Swing Check Valve (Anti-Slam)
Description
Features:
1. Swing check valve with counter weight.
27 of 34
Brand YASIKINominal Size DN10-DN100Materials BronzeConnection Threaded BPSTFlange JIS5K/10K, ANSI 150, PN10/PN16
YASIKI Bronze Gate Valves
Description
Feature:
1. Open/Close Indicator
Brand YASIKI
YASIKI Ball Valve
28 of 34
Brand YASIKI
YASIKI Thermometer
Brand YASIKINominal Size DN15~DN200Materials SS304, SS316, Brass, BronzeConnection Type Threaded BSPT/ NPT Ends
YASIKI Foot Valves
29 of 34
Flange Type JIS 10K, ANSI 150LBS, PN16
Brand YASIKINominal Size DN15~DN500 *Materials EPDM, Neoprene, Nitrile, Buna-N ElastomerConnection
Threaded BPST, JIS 5K/10K/ 20K, ANSI 150/300,PN10/16/40
YASIKI Rubber Expansion Joints
Description
Optional Features:
Customizable Flange MaterialsMild SteelA105A216WCBSS304, SS 316Tie Rods for Reinforcement
Brand YASIKINominal Size DN6~DN100Materials A216WCB Cast Steel, SS304, SS316Seat Material PTFE/RPTFE/PPL/PEEKConnection Type
Threaded BSPT/ NPT Ends, Butt-Weld, Socket-Weld
YASIKI Threaded Ends Ball Valves
Description
Features:
1. ISO-Mounting Pad ISO52112. Lever, Gear, Pneumatic or Electric Operated
30 of 34
Brand YASIKINominal Size DN15~DN300Materials
Cast/Ductile Iron, A216WCB, Cast Steel, SS304, SS316Flange Standards
JIS10K/20K, ANSI 150/300/600LBS, PN10/16
YASIKI Flanged Ends Gate Valve
Description
Features:
1. Rising stem2. Non-rising stem
Brand YASIKINominal Size DN15~DN50Material Ductile IronConnection Type Threaded BSPTFlange Standards JIS10K/20K, ANSI 150/300LBS
YASIKI Ductile Iron Globe Valves
Brand YASIKINominal Size DN15~DN300Materials Cast/ Ductile IronFlange Standards PN10/16
YASIKI Sluice Gate Valve
Description
Optional Features:
With/ without handwheel
Brand YASIKIMaterial Aluminum Die-Cast BodyConnection Type Namur Standard Mounting
YASIKI Limit Switch with Indicator
Description
Features:
1. Weather proof2. Explosion proof models available3. Explosion proof Ex d IIB T64. ISO5211 Namur Mounting5. Captive cover bolts, visual On-Off Position6. Two Cable Entry Port, Quick Set Cam
31 of 34
Brand YASIKIType
Pressure Gauge, Vacuum Gauge, Compound Gauge,Differential Pressure Gauge
Nominal Dial Size40mm, 50mm, 63mm, 80mm, 100mm, 150mm, 250mm
Materials Fully Stainless-Steel Case, SS316 BourdonConnection Type
Bottom Entry, Center Back with Front Flange, Bottom BackEntry
Connection 0.25" ~ 0.5", NPT Thread
YASIKI All Stainless-Steel Pressure Gauge
Description
External Zero Adjustment (Optional)Stainless Steel Case & Measuring SystemSocket Directly Welded to caseDry and Liquid Filled Version
Brand YASIKINominal Dial Size
40mm, 50mm, 63mm, 80mm, 100mm, 150mm, 250mmMaterials Steel Case, Powder Coated/ PaintedConnection Type
Bottom Entry, Center-Back with Front Flange, Bottom BackEntry
Connection 0.25" ~ 0.5" BSPT, NPT Thread
YASIKI General Purpose Pressure Gauges
Brand YASIKINominal Dial Size 63mm, 80mm, 100mm, 150mm, 250mmMaterials Fully Stainless-steel Case & StemConnection Type
Bottom Entry, Center-Back with Front Flange, All-Angle TypeConnection 0.25"~0.5" BSPT, NPT Thread
YASIKI Temperature Gauges
Description
Optional Feature:
Capillary Type TemperatureGauge with Customizable Probe LengthSilicon Oil Filled Option
Brand YASIKINominal Size DN6~DN100Materials SS304, SS316, Brass, BronzeConnection Type Threaded BSPT/ NPT Ends
YASIKI Threaded Ends Globe Valves
32 of 34
Brand YASIKINominal Size DN15~DN50Materials
Forged Steel A105, Forged Stainless Steel F304, F316,F304L, F316L
Connection TypeThreaded NPT Ends, Socket-Weld, Butt Weld
YASIKI Forged Steel Gate Valves
Brand YASIKINominal Size DN15~DN50Materials
Forged Steel A105, Forged Stainless-Steel F304, F316,F304L, F316L
Connection TypeThreaded NPT Welds, Socket Welds Butt Welds
YASIKI Forged Steel Globe Valves
Brand YASIKINominal Size DN40~DN600Materials
Cast/Ductile Iron, A216WCB Cast Steel, SS304, SS316Seat Material EPDM/ NBRFlange Standards JIS10K/20K, ANSI 150/300LBS, PN10/16
Single Door Wafer Type Check Valves
Brand YASIKINominal Size DN40~DN600Materials
Cast/ Ductile Iron, A216WCB Cast Steel, SS304, SS316Flange Standards JIS 10K/20K, ANSI 150/300LBS, PN10/16
Dual Plate Wafer Type Check Valves
33 of 34
Brand YASIKIConnection Type Threaded BSPTSuitable Pipe Sizes DN15~DN100Materials SS304
YASIKI Ball Float Valves
Brand YASIKINominal Size DN25~DN300Materials Cast Iron, A216WCB, Cast Steel, SS304, SS316Flange Standards
JIS10K/20K, ANSI 150/300/600LBS, PN10/16/40
Safety Relief Valve-Lever Type
Description
Optional Features:
Full Lift/ Low-liftOpen/ Closed BonnetWith/ Without Lever
Tel +607-777 1055Fax +607-777 1066E-Mail [email protected] www.leesonmech.com
Leesonmech Engineering (M) Sdn. Bhd.
Leesonmech HQ, No. 18, Jalan 18, Taman Sri Kluang, 86000, Kluang, Johor,Malaysia
Kuala Lumpur Branch Office +603-8081 8055/8066Singapore Branch +6562654568Singapore Website http://leesonmech.sg
Leesonmech Engineering (M) Sdn. Bhd.
34 of 34