okuma live tool catalog - industrial cutting tools · 2018. 7. 18. · vdi 30 lb 10m, lb 10 ii m lb...

L I V E T O O L F O R O K U M A

[Heimatec headquarters-Germany]

Heimatec is an international manufacturing company headquartered in Renchen, Germany. Heimatec’s 40,000 square foot facility, on 7.5 acres, is home to over 100 employees including office and manufacturing staff. Our experienced and innovative staff is dedicated to providing our customers with the latest and best technology available. In addition, we are also servicing our U.S. customers from our sales and service facility located in the Chicagoland area.

Heimatec Automations was founded

Started designing, assembling, andmarketing Live Tools.

Started “in house” manufacturing ofcomponents

Invested in 12 “state of the art”3D-Workstations for the designdepartment

Founded heimatec GmbHPräzisionswerkzeuge (Precision Tools)

Opened 1st international sales officein Moscow

Purchased Multi Spindlemanufacturing company to supplylarge Transfer Lines and SystemBuilders with special purpose tools

Set up new research anddevelopment department

Purchased several new CNC Lathesand Machining Centers to increaseproduction

Moved into new facility andexpanded manufacturing capacity

Optimized packing and shippingdepartment

Opens new Sales and Service U.S.Headquarters

The Way to Success

1987

1988

1997

2001

2003

2006

2007

2008

2010

process. The surface of the Tool bodies are black oxidized for maximum resistance.We guarantee top quality Tools by adhering to strict and frequent inspections in our manufacturing Heimatec uses the best possible materials to manufacture our Tools for the highest possible quality.

Bearing Systems

bearings or a combination of bearings can be used to provide extreme stability and rigidity specially can be accommodated through the use of special stronger bearing systems. For example – Timken or custom bearing systems to assure the highest possible spindle concentricity. Special applications standard high precision spindle bearings, ABEC 7(P4), with optional Timken bearings with ABEC (5(P5), All bearing seats are precision manufactured for greater output and alignment accuracy. Bearings are

in milling applications.

Gear Systems

ground and lapped in sets, are used to provide smooth transmission output and minimal run out.gears with straight or inclined teeth, made from special high resistance gear steel, specially hardened, ground and lapped in sets, are used to provide a smooth transmission output and minimal run out. Spur Only bevel gears with inclined teeth, made from special high resistance gear steel, specially hardened,

Spindles and AccuracyEach tool spindle is precision ground for the highest possible concentricity at the collet. All spindles have

maximum allowable run out is 0.01mm (0.00039”). Specially designed seals are used against coolant in the taper of the collet output. The majority of Tools have a 0.006mm (0.0002”) maximum run out. The

a splash ring at the front to cover the seals from damage and splash coolant. Run out is measured

contamination for units using internal coolant supply.

Quality and Lubrication

capability.spindle speeds are 4,000 – 6,000 rpm, and our speed increasers have up to a 15,000 – 18,000 rpm lubrication using a special Teflon based grease. No additional lubrication is necessary. Our standard tolerances. All we need is the serial number of Tool to identify it. All Tool Holders have a lifetime We have a 100% control and documentation of all built in components, listing dimensions, and

1

Output Systems

WeldonER Collet

Sandvik-Coromant-CaptoArbors

Komet ABS system

heimatec easy-quick HT quick change systemCAT/SK/BTHSK

Coolant supplyExternal Coolant Supply

High Pressure Internal Coolant Supply Internal Coolant Supply up to 375 psi

up to 2,000 psi

3:1 reducerGear ratios

1:7 multiplier

STANDARD OF PRECISIONTHE

LIVE TOOLS FEATURES & SPECIFICATIONS

2

bearings, ABEC 7(P4), with optional Timken bearings Bearings are standard high precision spindle All mounting surfaces are hardened and ground. steels that exhibit superior strength characteristics. tools are manufactured from special high tensile difficult manufacturing processes. Heimatec Live designed and manufactured to meet the most Heimatec’s standard and custom Live Tools are

Special stronger bearing systems are used for heavy assure the highest possible spindle concentricity. with ABEC 5(P5), or custom bearing systems to

splash ring to cover the seals from damage. designed seals are used, and all spindles have a for the highest possible concentricity. Special available, and each tool spindle is precision ground sets to provide the smoothest transmission output and are specially hardened, ground and lapped in teeth, are made from high resistance gear steel, All gears used in our Live Tools have inclined

milling applications.

Clamping systems include:

Capto, ABS, HSK, CAT, and easy-quick HT ER, Weldon, face mill arbors, shrink fit,

Multiple drive systems available:

Spline, bevel gear, special couplings,

coolant supply as well as high pressure Coolant systems include standard external

and moreTOEM, tang,

up to 18,000 rpm and gear reducers with Standard rpm 6,000 with speed increasers

internal coolant up to 2,000 psi

up to 3:1 gear ratio

Custom made special application tools available

BMT 60 Space Turn LB 2000 EX Space Turn LB 2500 EX Space Turn LB 3000 EX

Part No. Output ratio RPM PSI 8 030 66 041 ER 32 1:1 6000 Ext 8 030 66 042 ER 32 1:1 6000 375 8 039 66 013 ER 32 1:1 6000 Ext

Radial Tool Holder

Part No. Output ratio RPM PSI 8 010 66 035 ER 32 1:1 6000 Ext 8 010 66 036 ER 32 1:1 6000 375

Axial Tool Holder

Part No. Output ratio RPM PSI 8 010 67 033 HT 5 1:1 6000 Ext 8 010 67 034 HT 5 1:1 6000 375

Axial Tool Holder HT System

Part No. Output ratio RPM PSI 8 030 67 038 HT 5 1:1 6000 Ext 8 030 67 039 HT 5 1:1 6000 375 8 039 67 003 HT 5 1:1 6000 Ext

Radial Tool Holder HT System

Part No. Output ratio RPM PSI 8 040 64 004 ER 16A 1:1 6000 Ext

Universal 0-90° Holder

Part No. Output ratio RPM PSI 8 037 65 010 Arb. 22 2:1 3000 --

Hobbing Head

combi bearings / Timken Dual output holder

Internal coolant High pressure available on request.

Also available with other outputs or special speed increaser or decreaser Warranty: 2 years on parts and labor All items are subject to technical changes.

8 200 03 003 cover plate 8 224 03 000 cut-off holder SH 32 8 224 03 001 cut-off holder SH 32 8 224 05 001 universal turning holder sq. 25 8 240 08 001 boring bar holder Ø 32 8 240 09 007 boring bar holder Ø 40 8 244 05 001 combi facing holder sq. 25

Static Tool Holder

3

BMT 60 Space Turn LB 4000 EX

Part No. Output ratio RPM PSI 8 030 67 040 ER 40 1:1 6000 Ext 8 030 67 041 ER 40 1:1 6000 375 8 030 67 044 ER 40 1:1 6000 1050

Radial Tool Holder Part No. Output ratio RPM PSI 8 010 67 036 ER 40 1:1 6000 Ext 8 010 67 037 ER 40 1:1 6000 375

Axial Tool Holder



Part No. Output ratio RPM PSI 8 030 67 053 HT 5 1:1 6000 Ext 8 030 67 061 HT 5 1:1 6000 375 8 030 67 062 HT 5 1:1 6000 1050


Part No. Output ratio RPM PSI 8 040 64 006 ER 16A 1:1 6000 Ext


combi bearings / Timken

Internal coolant

High pressure available on request.


8 224 03 002 cut-off holder SH 32 8 224 05 002 universal turning holder sq. 25 8 240 09 008 boring bar holder Ø 40 8 244 05 002 combi facing holder sq. 25

Static Tool Holder

4

VDI 30

LB 10M, LB 10 II M LB 200 M, ES-L8 II

LB 2000 EX M

Part No. Output ratio RPM PSI 8 030 24 100 ER 20 1:1 6000 Ext 8 030 25 130 ER 25 1:1 6000 Ext

Radial Tool Holder

Part No. Output ratio RPM PSI 8 010 24 062 ER 20 1:1 6000 Ext 8 010 25 025 ER 25 1:1 6000 Ext 8 010 25 060 ER 25 1:1 6000 375 8 011 25 010 Arb. 22 1:1 6000 Ext 8 019 25 036 ER 25 1:2 12000 Ext 8 019 25 032S ER 25 1:2 12000 375

Axial Tool Holder



Part No. Output ratio RPM PSI 8 033 25 005 ER 25 1:1 6000 Ext 8 033 25 019 ER 25 1:1 6000 375 8 033 25 027 ER 25 1:2 12000 Ext 8 033 26 030 HT 4 1:1 6000 Ext

Radial Offset Tool Holder

Part No. Output ratio RPM PSI 8 040 25 009 ER 25 1:1 6000 Ext



8 210 26 011 tool holder HT 4 IC 8 210 26 012 tool holder HT 4 IC 8 215 22 000 tool holder C2-30x20 8 320 22 008 cut-off holder height adjustable SH 26 8 320 23 000 cut-off holder height adjustable SH 32

Static Tool Holder

5

combi bearings / Timken Speed increaser / decreasern

Axial offset front Internal coolant


Axial offset front/rear Internal coolant

VDI 30 LB 200 MW / MY


Radial Tool Holder Part No. Output ratio RPM PSI 8 010 24 062 ER 20 1:1 6000 Ext 8 010 25 025 ER 25 1:1 6000 Ext 8 010 25 060 ER 25 1:1 6000 375 8 011 25 010 Arb. 22 1:1 6000 Ext 8 019 25 010 ER 25 1:1 6000 Ext 8 019 25 012 ER 25 1:1 6000 Ext 8 019 25 036 ER 25 1:2 12000 Ext 8 019 25 032S

ER 25 1:2 12000 375

Axial Tool Holder



Part No. Output ratio RPM PSI 8 033 25 005 ER 25 1:1 6000 Ext 8 033 25 019 ER 25 1:1 6000 375 8 033 25 027 ER 25 1:2 12000 Ext 8 033 26 030 HT 4 1:1 6000 Ext





8 210 26 011 tool holder HT 4 IC 8 210 26 012 tool holder HT 4 IC 8 215 22 000 tool holder C2-30x20 8 320 22 008 cut-off holder height adjustable SH 26 8 320 23 000 cut-off holder height adjustable SH 32

Static Tool Holder

6

VDI 40

LB 15 series, LU 15 M LU 300 II M, LB 300 MC

L 370 Captain LB 3000 EX M

ES-L 10II-M

Part No. Output ratio RPM PSI 8 030 46 045 ER 32 1:2 8000 Ext 8 030 46 048 ER 32A 1:1 5000 Ext 8 030 46 077 ER 32 1:1 5000 Ext 8 030 46 088 ER 32 1:1 6000 375 8 030 46 145 ER 32 1:2 8000 375 8 030 47 040 ER 40 1:1 6000 Ext 8 030 47 061 ER 40 1:1 6000 375 8 030 47 066 ER 40 2:1 3000 Ext 8 031 44 006 Arb. 16 1:1 4000 Ext 8 031 45 016 Arb. 22 1:1 4000 Ext

Radial Tool Holder

Part No. Output ratio RPM PSI 8 010 46 015 ER 32 1:1 6000 Ext 8 010 46 029 ER 32 1:1 6000 375 8 010 47 013 ER 40 1:1 4000 Ext 8 010 47 043 ER 40 1:1 6000 375 8 011 44 006 Arb. 16 1:1 4000 Ext 8 011 45 011 Arb. 22 1:1 4000 Ext 8 011 46 002 Arb. 27 1:1 6000 Ext 8 011 47 003 Arb. 32 1:1 6000 Ext 8 019 45 058 ER 25 1:2 12000 375 8 019 46 013 ER 32 1:1 6000 Ext 8 019 46 019 ER 32 1:1 6000 Ext 8 019 46 020 ER 32 1:1 6000 Ext

Axial Tool Holder

Part No. Output ratio RPM PSI 8 010 46 059 HT 4 1:1 4000 Ext 8 010 47 051 HT 5 1:1 4000 Ext 8 010 47 065 HT 5 1:1 4000 375


Part No. Output ratio RPM PSI 8 030 46 117 HT 4 1:1 5000 Ext


Part No. Output ratio RPM PSI 8 040 45 016 ER 25 1:1 6000 Ext 8 040 44 037 ER16A 1:2 12000 Ext


7


Y Axes offset holder Axial offset Dual/Front/Rear

Internal coolant Woodruf keycutter

Part No. Output ratio RPM PSI 8 033 45 008 ER 25 1:3 12000 Ext 8 033 46 024 ER 32 1:1 6000 375 8 033 46 028 ER 32 1:1 6000 Ext 8 033 46 032 ER 32 2:1 3000 375 8 033 47 020 HT 5 1:1 6000 Ext 8 033 47 021 HT 5 2:1 3000 375 8 033 47 022 HT 5 1:1 6000 375 8 037 45 003 ER 25A 1:1 6000 Ext 8 038 45 005 ER 25 1:1 6000 Ext


Part No. Output ratio RPM PSI 8 037 49 021 Arb. 3:1 2000 Ext

Hobbing head With interchangeable arbors ( not included )



VDI 40 LU 25 M , LU 400 M LB 25 series, LB 400

LB 4000 EX M L 470 Captain

Part No. Output ratio RPM PSI 8 010 46 018 ER 32 1:1 4000 Ext 8 010 46 079 ER 32 1:1 4000 375 8 010 47 012 ER 40 1:1 4000 Ext 8 010 47 027 ER 40 1:1 4000 375 8 011 45 014 Arb. 22 1:1 4000 Ext

Part No. Output ratio RPM PSI 8 030 46 116 ER 32 1:1 6000 375 8 030 46 143 ER 32 1:1 6000 Ext 8 030 47 041 ER 40A 1:1 6000 Ext 8 030 47 053 ER 40 1:1 6000 375

Axial Tool Holder Radial Tool Holder

Part No. Output ratio RPM PSI 8 010 47 038 HT 5 1:1 4000 375 8 010 47 076 HT 5 1:1 4000 Ext 8 019 47 017 HT 5 2:1 3000 Ext 8 019 47 018 HT 5 2:1 3000 375 8 019 47 019 HT 5 1:2 10000 Ext 8 019 47 020 HT 5 1:2 10000 375






8

Speed increaser / decreaser Internal coolant

Offset / front / rear Combi bearing / Timken

Part No. Output ratio RPM PSI 8 030 46 152 HT 4 1:1 6000 375




Part No. Output ratio RPM PSI 8 037 049 021

Arb. 3:1 2000 Ext

VDI 40 L 470 MW

LB 400 MW

Part No. Output ratio RPM PSI 8 030 46 045 ER 32 1:2 8000 Ext 8 030 46 048 ER 32A 1:1 5000 Ext 8 030 46 077 ER 32 1:1 5000 Ext 8 030 46 088 ER 32 1:1 6000 375 8 030 46 145 ER 32 1:2 8000 375 8 030 47 040 ER 40 1:1 6000 Ext 8 030 47 061 ER 40 1:1 6000 375 8 030 47 066 ER 40 2:1 3000 Ext 8 031 44 006 Arb. 16 1:1 4000 Ext 8 031 45 016 Arb. 22 1:1 4000 Ext

Radial Tool Holder

Part No. Output ratio RPM PSI 8 010 46 018 ER 32 1:1 4000 Ext 8 010 46 079 ER 32 1:1 4000 375 8 010 47 012 ER 40 1:1 4000 Ext 8 010 47 027 ER 40 1:1 4000 375 8 011 45 014 Arb. 22 1:1 4000 Ext 8 013 46 002 ER 32 3:1 3000 Ext 8 019 45 058 ER 25 1:2 12000 375 8 019 46 013 ER 32 1:1 6000 Ext 8 019 46 019 ER 32 1:1 6000 Ext 8 019 46 029 ER 32 1:1 6000 Ext 8 019 46 051 ER 32 1:1 6000 Ext 8 019 46 052 ER 32 1:1 6000 Ext

Axial Tool Holder

Part No. Output ratio RPM PSI 8 010 47 038 HT 5 1:1 4000 375 8 010 47 076 HT 5 1:1 4000 Ext 8 019 47 017 HT 5 2:1 3000 Ext 8 019 47 018 HT 5 2:1 3000 375 8 019 47 019 HT 5 1:2 10000 Ext 8 019 47 020 HT 5 1:2 10000 375


Part No. Output ratio RPM PSI 8 030 46 117

HT 4 1:1 6000 Ext



9

Part No. Output ratio RPM PSI 8 033 45 008 ER 25 1:3 12000 Ext 8 033 46 024 ER 32 1:1 6000 375 8 033 46 028 ER 32 1:1 6000 Ext 8 033 46 032 ER 32 2:1 3000 375 8 033 47 020 HT 5 1:1 6000 Ext 8 033 47 021 HT 5 2:1 3000 375 8 033 47 022 HT 5 1:1 6000 375 8 037 45 003 ER 25A 1:1 6000 Ext 8 038 45 005 ER 25 1:1 6000 Ext




Y Axes offset holder Axial offset Dual/Front/Rear

Internal coolant Woodruf keycutter

VDI 50 LU 35 M LB 35 M

Part No. Output ratio RPM PSI 8 010 56 021 ER 32 1:1 4000 Ext 8 010 56 037 ER 32 1:1 4000 375 8 010 57 027 ER 40 1:1 4000 375 8 010 57 031 ER 40 1:1 4000 Ext 8 019 56 006 ER 32 1:2 10000 Ext

Part No. Output ratio RPM PSI 8 030 56 046 ER 32 1:2 8000 Ext 8 030 57 022 ER 40 1:1 4000 375 8 030 57 055 ER 40 1:1 4000 Ext


Part No. Output ratio RPM PSI 8 010 58 018 HT 6 1:1 4000 1050 8 019 58 004 HT 6 1:3 12000 1050 8 010 58 031 HT 6 1:1 4000 Ext 8 010 58 012 HT 6 1:1 4000 375


Part No. Output ratio RPM PSI 8 033 57 008 ER 40 1:1 4000 375 8 033 58 007 HT 6 1:1 4000 375 8 033 58 009 HT 6 1:1 4000 1050 8 033 58 010 HT 6 1:3 12000 1050


Also available with other outputs or special speed increaser or decreaser Warranty: 2 years on parts and labor All items are subject to technical changes. 10

Part No. Output ratio RPM PSI 8 030 58 024 HT 6 1:1 4000 Ext


combi bearings / Timken Speed increaser / decreaser

Internal coolant Offset

VDI 60

LU 45 M LB 45 M

Part No. Output ratio RPM PSI 8 010 68 004 ER 50 1:1 3000 375

Axial Tool Holder Part No. Output ratio RPM PSI 8 030 68 003 ER 50 1:1 3000 Ext 8 030 68 007 ER 50 1:1 3000 375

Radial Tool Holder



Part No. Output ratio RPM PSI 8 033 68 001 ER 50 1:2 6000 375 8 033 68 005 HT 6 1:1 3000 Ext 8 033 68 006 HT 6 1:1 3000 375





11


Radial Y-Axe Offset Holder

combi bearings / Timken Speed increaser / decreaser

Internal coolant

VDI 30 LT 10 M

LT 200 M LT 200 MY

Part No. Output ratio RPM PSI 8 030 25 131L ER 20 1:1 6000 Ext 8 030 25 032L ER 25 1:1 6000 375 8 030 25 112RS ER 25 1:1 6000 Ext 8 030 25 124 ER 25 1:1 6000 375 8 030 26 058RS HT 4 1:1 6000 375 8 030 26 097L HT 4 1:1 6000 375 8 039 25 010 ER 25 1:1 6000 Ext 8 039 26 014 HT 4 1:1 6000 Ext 8 037 24 019 ER20 1,3:1 4000 Ext

Radial Tool Holder Main Spindle

Part No. Output ratio RPM PSI 8 010 24 062 ER 20 1:1 6000 Ext 8 010 25 025 ER 25 1:1 6000 Ext 8 010 25 060 ER 25 1:1 6000 375 8 011 25 010 Arb. 22 1:1 6000 Ext 8 019 25 036 ER 25 1:2 12000 Ext 8 019 25 032 ER 25 1:2 12000 375

Axial Tool Holder



Part No. Output ratio RPM PSI 8 030 25 116RS ER 25 2:1 3000 Ext

Radial Tool Holder Sub Spindle

Part No. Output ratio RPM PSI 8 040 23 008 ER 11A 1:1 4000 Ext 8 040 24 020 ER 16 1:1 4000 Ext


Also available with other outputs or special speed increaser or decreaser Warranty: 2 years on parts and labor All items are subject to technical changes. RS = Right hand tool Sub spindle

8 102 52 016 tool holder Ø 52 8 210 26 011 tool holder HT 4 IC 8 210 26 012 tool holder HT 4 IC 8 214 24 002 universal turning holder sq. 20 8 230 27 028 boring bar holder Ø 25 8 230 28 021 boring bar holder Ø 32 8 230 28 024 boring bar holder Ø 32 8 230 29 006 boring bar holder Ø 40 8 234 24 001 combi facing holder 30x20x 95 8 239 28 005 double boring bar holder Ø 32 8 251 24 001 combi double turning holder sq. 20 8 320 22 007 cut-off holder height adjustable SH 26 8 320 23 005 cut-off holder height adjustable SH 32

Static Tool Holder

12




Dual output holder Internal coolant

Woodruf keycutter Offset front / rear

VDI 40 LT 15 M LT 300 M

LT 300 MY

Part No. Output ratio RPM PSI 8 010 46 015 ER 32 1:1 6000 Ext 8 010 46 029 ER 32 1:1 6000 375 8 010 47 013 ER 40 1:1 4000 Ext 8 010 47 043 ER 40 1:1 6000 375 8 011 44 006 Arb. 16 1:1 4000 Ext 8 011 45 011 Arb. 22 1:1 4000 Ext 8 011 46 002 Arb. 27 1:1 6000 Ext 8 011 47 003 Arb. 32 1:1 6000 Ext

Axial Tool Holder Part No. Output ratio RPM PSI 8 030 46 050 ER 32 1:2 12000 Ext 8 030 46 101L ER 32 1:1 6000 Ext 8 030 46 132R ER 32 1:1 6000 Ext 8 030 46 168L ER 32 1:1 6000 375 8 030 46 169R ER 32 1:1 6000 375 8 030 47 052L ER 40 1:1 6000 Ext 8 031 44 020L Arb. 16 1:1 6000 Ext 8 033 45 009R CaptoC3 1:1 6000 Ext 8 033 45 010L CaptoC3 1:1 6000 Ext 8 039 46 003 ER 32 1:1 5000 Ext

Radial Tool Holder

Part No. Output ratio RPM PSI 8 010 46 059 HT 4 1:1 4000 Ext 8 010 47 051 HT 5 1:1 4000 Ext 8 010 47 065 HT 5 1:1 4000 375


Part No. Output ratio RPM PSI 8 033 46 020 ER 32 1:1 6000 Ext 8 033 46 022 ER 32 1:1 6000 Ext 8 033 46 034 ER 32 1:1 6000 375 8 039 46 011 ER 32 1:1 5000 Ext





13



Part No. Output ratio RPM PSI 8 030 46 162L HT 4 1:1 6000 Ext 8 030 46 177R HT 4 1:1 6000 Ext



Internal coolant Dual output

VDI 40 LT 25 M

LT 25 MY

Part No. Output ratio RPM PSI 8 010 46 037 ER 32 1:1 6000 Ext 8 010 46 042 ER 32A 1:1 6000 Ext 8 010 46 081 ER 32A 1:1 6000 375 8 010 47 016 ER 40 1:1 6000 Ext 8 011 45 017 Arb. 22 1:1 6000 Ext

Part No. Output ratio RPM PSI 8 030 46 059 ER 32A 1:1 6000 Ext 8 030 46 118 ER 32A 1:1 6000 375 8 030 46 166 ER 32 1:1 6000 375 8 030 46 167 ER 32 1:1 6000 375 8 030 47 005 ER 40 1:1 6000 Ext 8 030 47 006 ER 40 1:1 6000 Ext



14



combi bearings / Timken Internal coolant

HTeasy-quick - THE QUICK CHANGE SYSTEM OF HEIMATEC

The Quick Change System of heimatec saves time and money!

Time Saving•

seconds with the highest available precision. handling. All adapters can be changed within our easy-quick HT system offers comfortable Through use of our special clamping screw,

• just one single bolt minimizing downtime. The adapters can be changed by unclamping

• time consuming adjustments. The Tool remains in the machine eliminating

Cost Saving

• Lower initial investments• Minimized Tooling time• Reduction of Tool quantity• Lower inventory costs

HTeasy-quick - THE QUICK CHANGE SYSTEM OF HEIMATEC

• Collet outputs• Extended collet outputs• Collets with tension and expansion for tapping• Weldon• Weldon extended

Our quick change system is available in six different sizesHT 2 HT 3 HT 4 HT 5 HT 6 HT 7

Features

Adapters are available with all common outputs as...

• setup time High degree of flexibility with extremel short

• Shortest gage line of any system• Able to preset outside of machine tool

• Arbors• Hydro chucks• Indexable insert holders• Shrink Fit• Blanks, Plugs

• Coolant through capabilities standard• Exceptional repeatability - under .0002”• Easy handling produces low setup costs

ANGLE HEADS

technical features as our Live ToolsAll Angle Heads are manufactured using the same quality standards and

10

• 360o body rotation• Compatible with most Automatic Tool Changers• 1:1 standard gear ratio• Torque arm alignment ring• Wrenches included

ANGLE HEADS

twin set of matched angular contact bearings, and a rear radial support bearing.Our Angle Heads are excellent for heavy milling operations due to the support by twin or double

Timken bearings, or custom bearing systems to assure the highest possible spindle concentricity.are sandblasted and anodized blue. We only use high precision spindle bearings, ABEC 7(P4), Heimatec Angle Heads are manufactured from special high tensile aluminum and all surfaces

• Interchangeable torque arms• Spindle speeds up to 15,000 rpm• Torque rating up to 150 Nm• Powerful, accurate, and rigid• Applications include milling, drilling, and tapping

Our Tools are all manufactured to meet today’s DIN standards. ThisHigh Quality Static Tool Holders.

“Quality tools produce quality parts!”place and helps to produce the highest precision work pieces.complements the high quality manufacturing systems in the market

Custom made static toolsLet our Design Department solve your special

standard Tools.These Tools have the same superior quality as ourprovide custom made Tools for all CNC Lathes.a Tool to suit your requirements. We canapplication and manufacturing needs by customizing

and Cutting Tool.Optimal Connection Between Machine

heimatec’s Tools offer high efficiency and long Tool

customers to enjoy problem-free manufacturingprecision of the machine tool. This enables ourlife due to its characteristics of complimenting the

and time saving operations.

STATIC TOOLS

Page 312

Live Tools for CNC Lathes

Angle Heads for CNC Machining Centers

ToolStatic s

STATIC TOOLS

heimatec has the solution for all yourapplication needs!

ToolCustom s

Multi Spindle Tools

13

15 E Palatine Rd.Suite 109Prospect Heights, IL 60070Phone: 847.749.0633 Fax: 847.749.2445

www.heimatecinc.com

okuma live tool catalog - industrial cutting tools · 2018. 7. 18. · vdi 30 lb 10m, lb 10 ii m lb...

Documents