old aalco stocklist
TRANSCRIPT
ABERDEEN41 Castle TerraceAberdeen AB11 5EA Tel: 01224 596611Fax: 01224 596622e-mail: [email protected]
BELFASTThe Belfast Metal CentreMcKinney Industrial Estate54 Mallusk RoadNewtownabbey BT36 4PX Tel: 02890 838 838Fax: 02890 837 837e-mail: [email protected]
BIRMINGHAMShelah RoadHalesowenWest Midlands B63 3PH Tel: 0121 585 3600Fax: 0121 585 6864e-mail:[email protected]
CHEPSTOWAvenue WestNewhouse Park EstateChepstowMonmouthshire NP16 6UD Tel: 01291 638 638Fax: 01291 638 600e-mail: [email protected]
DYFEDUnits 3-4Capel Hendre Industrial EstateAmmanfordCarmarthenshire SA18 3SJ Tel: 01269 842044 Fax: 01269 845276e-mail: [email protected]
GLASGOW117 Clydesmill PlaceCambuslang Investment ParkGlasgow G32 8RF Tel: 0141 646 3200 Fax: 0141 646 3260e-mail: [email protected]
HULLSaxon WayPriory Park WestHessleHull HU13 9PBTel: 01482 626262 Fax: 01482 626263e-mail: [email protected] 1, Revie Road off Elland RoadLeeds LS11 8JGTel: 0113 276 3300 Fax: 0113 276 0382e-mail: [email protected]
LIVERPOOL207 Great Howard StreetLiverpool L5 9ZHTel: 0151 207 3551Fax: 0151 207 2657e-mail: [email protected]
MANCHESTERExpress Trading EstateStone Hill RoadFarnworthBolton BL4 9NNTel: 01204 863456Fax: 01204 863430e-mail: [email protected]
NEWCASTLEFirst AvenueTeam Valley Trading EstateGatesheadTyne & Wear NE11 0NU Tel: 0191 491 1133Fax: 0191 491 1177e-mail: [email protected]
NORWICHRoundtree WayMousehold LaneNorwich NR7 8SRTel: 01603 787878Fax: 01603 789999e-mail: [email protected]
NOTTINGHAMHarrimans LaneDunkirkNottingham NG7 2SDTel: 0115 988 2600Fax: 0115 988 2636e-mail:[email protected]
SLOUGHUnit 2, 552 Fairlie RoadSlough Trading EstateSloughBerkshire SL1 4PYTel: 01753 619900Fax: 01753 512227e-mail: [email protected]
SOUTHAMPTONTest LaneNurslingSouthampton SO16 9TATel: 02380 875200Fax: 02380 875275e-mail:[email protected]
STOKEUnit F, Forge WayBrown Lees Industrial EstateBiddulphStoke-on-Trent ST8 7DNTel: 01782 375700Fax: 01782 375701e-mail: [email protected]
SWANLEYUnits 6 & 7Pedham Place Industrial EstateWested LaneSwanleyKent BR8 8TETel: 01322 610900Fax: 01322 610910e-mail: [email protected]
BRANCHES
Stainless Steel
Aluminium
Copper, Brass & Bronze
Nickel Alloys
Standard Stock Range
www.aalco.co.uk
0271 Aalco Stock list Cover 04 13/9/04 1:47 pm Page 3
STAINLESS STEEL METRIC TUBE & FITTINGS 59
WEIGHTS
All weights shown in this publication are for
guidance only. They are calculated using nominal
dimensions and scientifically recognised densities.
Please note that in practice, the actual weight
can vary significantly from the theoretical weight
due to variations in manufacturing tolerances
and compositions.
The information contained herein is based on our
present knowledge and experience and is given in
good faith. However, no liability will be accepted by
the Company in respect of any action taken by any
third party in reliance thereon.
As the products detailed herein may be used for
a wide variety of purposes and as the Company
has no control over their use, the Company
specifically excludes all conditions or warranties
expressed or implied by statute or otherwise as to
dimensions, properties and/or their fitness for any
particular purpose. Any advice given by the
Company to any third party is given for that party’s
assistance only and without any liability on the part
of the Company.
Any contract between the Company and a customer
will be subject to the Company’s Conditions of Sale.
The extent of the Company’s liabilities to any
customer is clearly set out in those Conditions; a
copy of which is available on request.
October 2004 – Issue 5
Stainless Steel Tubular Products DataDisc
Road Transport Bodybuilding Manual
Stainless SteelStructural Tube
Square & Rectangular
Stainless SteelStructural Tube
Square & Rectangular
StainlessSteel
Wire Mesh
StainlessSteel
Wire Mesh
Structural Tube Brochure
Complete Product Catalogue
Aerospace Brochure Road Transport Brochure
Treadplate Brochure
Metric Tube & Fittings Brochure
Wire Mesh Leaflet
StandardStock Range
The following illustrate arange of product informationavailable from Aalco – For details of your local branchplease refer to back cover.
THE SERVICE PROVIDER
Treadplatein Aluminium & Stainless Steel
Technical Publication
No. 001
ISSUE 1. 05.01.04
Metric Tru-Bore®* Stainless Steel Tube & Fittings
Technical Publication
No. 001
ISSUE 1. 05.01.04
Road Transport Bodybuilding Manual
Weight per metre (kg) for given Wall Thickness in mmDN OD 2.5mm 3.0mm 4.0mm 5.0mm100 106 7.737100 108 10.417150 156 11.493150 158 15.425200 205 12.677200 206 15.249200 208 20.433250 255 15.807250 256 19.005300 305 18.937300 306 22.761300 308 30.449350 355 22.067350 356 26.517400 406 30.273400 408 40.465450 456 34.029500 506 37.785500 508 50.481600 606 45.297600 608 60.497700 708 70.508800 808 80.524900 910 113.00
Dimensional Tolerances to SS/EN/ISO 1127Outside Diameter (Designation D3): + or – 0.75% / minimum + or – 0.3mm Outside Diameter for tubes 203mm O/D & above (Designation T2): + or – 1.0% / minimum + or – 0.5mm Wall Thickness (Designation T3): + or – 10% / minimum + or – 0.15mm
Lengths6 meter random lengths with plain ends
Finish12mm to 18mm: Bright Annealed or Annealed & Pickled (Supplier Option) 20mm to 70mm: Annealed & Pickled 78mm and over: Not Heat Treated, Pickled
NoteTube above DN600 may be supplied with two or more longitudinal welds
Grades: EN 1.4432 (316L High Molybdenum) ● EN 1.4307 (304L) ● EN 1.4571 (316 Titanium/316Ti)
METRIC WELDED TUBE
0271 Aalco Stock list Cover 04 13/9/04 1:47 pm Page 1
3
ALUMINIUM EXTRUSIONS PAGE 4 - 10
ALUMINIUM ROLLED PRODUCTS PAGE 11 - 13
BRASS PAGE 14 - 19
BRONZE PAGE 20 - 21
COPPER PAGE 22 - 25
STAINLESS STEEL BAR AND SECTIONS PAGE 26 - 33
STAINLESS STEEL WELDED MESH PAGE 33
STAINLESS STEEL ROLLED PRODUCTS PAGE 34 - 37
STAINLESS STEEL SEAMLESS PIPE PAGE 38
STAINLESS STEEL SEAMLESS BUTT WELD FITTINGS PAGE 39 - 41
STAINLESS STEEL WELDED PIPE PAGE 42
STAINLESS STEEL WELDED BUTT WELD FITTINGS PAGE 43 - 46
STAINLESS STEEL FLANGES PAGE 47 - 48
STAINLESS STEEL FITTINGS PAGE 49
STAINLESS STEEL SEAMLESS TUBE PAGE 50 - 51
STAINLESS STEEL HYGIENIC TUBE & FITTINGS PAGE 52
STAINLESS STEEL STRUCTURAL & DECORATIVE TUBE PAGE 53 - 57
STAINLESS STEEL METRIC TUBE & FITTINGS PAGE 58 - 59
Copyright © 2004 All Rights Reserved
CONTENTS
0271 Aalco Stock List 04 20/9/04 11:48 am Page 1
ROUNDBAR
ALUMINIUM EXTRUSIONS
Dia Weight (in) per metre (Kg)
1⁄4 0.095⁄16 0.133⁄8 0.197⁄16 0.261⁄2 0.349⁄16 0.435⁄8 0.5416mm 0.5411⁄16 0.653⁄4 0.7720mm 0.8513⁄16 0.917⁄8 1.051 1.3711⁄8 1.7411⁄4 2.1515⁄16 2.3713⁄8 2.6035mm 2.6117⁄16 2.8411⁄2 3.0915⁄8 3.6313⁄4 4.2117⁄8 4.832 5.4921⁄8 6.2021⁄4 6.9523⁄8 7.7521⁄2 8.58
Dia Weight (in) per metre (Kg)
25⁄8 9.4623⁄4 10.43 12.431⁄4 14.531⁄2 16.833⁄4 19.34 22.041⁄4 24.841⁄2 27.843⁄4 31.05 34.351⁄4 37.851⁄2 41.553⁄4 45.46 49.461⁄2 58.07 67.371⁄4 72.271⁄2 77.28 87.981⁄2 99.29 11191⁄2 12410 13712 19813 23214 26915 30916 352
MACHINING
We stock aluminium round bar in three machining alloys:
Alloy 6082 T6 Machines well and, with chip breakers, produces swarf in short tight coils.
Alloy 2011 T3/T6 Often referred to as ‘FMA’ (Free Machining Alloy), this is produced especially for use onautomatic lathes. It offers exceptional machinability at high speeds and forms fine chips which are easilyremoved. It is particularly suitable for components with complex, detailed or extensive machining and canoften replace ‘free machining brass’ without tool changes.
Alloy 6262 T9 This may be used in place of Alloy 2011 in applications requiring higher corrosion resistanceand better anodising response. It has excellent machinability and surface finishing characteristics.
4
0271 Aalco Stock List 04 20/9/04 11:48 am Page 2
FLAT BARAlloy 6082-T6 or
6063-T6/6063A-T6
ALUMINIUM EXTRUSIONS
Size Weight (in) per metre (Kg)
3⁄8 x 1⁄4 0.161⁄2 x 1⁄8 0.111⁄2 x 3⁄16 0.161⁄2 x 1⁄4 0.221⁄2 x 3⁄8 0.335⁄8 x 1⁄8 0.145⁄8 x 3⁄16 0.205⁄8 x 1⁄4 0.275⁄8 x 3⁄8 0.415⁄8 x 1⁄2 0.553⁄4 x 1⁄16 0.083⁄4 x 1⁄8 0.163⁄4 x 3⁄16 0.253⁄4 x 1⁄4 0.333⁄4 x 3⁄8 0.493⁄4 x 1⁄2 0.663⁄4 x 5⁄8 0.827⁄8 x 1⁄8 0.191 x 1⁄16 0.111 x 1⁄8 0.221 x 3⁄16 0.331 x 1⁄4 0.441 x 5⁄16 0.541 x 3⁄8 0.661 x 1⁄2 0.871 x 5⁄8 1.091 x 3⁄4 1.3111⁄4 x 1⁄8 0.2711⁄4 x 3⁄16 0.4111⁄4 x 1⁄4 0.5511⁄4 x 3⁄8 0.8211⁄4 x 1⁄2 1.0911⁄4 x 5⁄8 1.3711⁄4 x 3⁄4 1.6411⁄4 x 1 2.1911⁄2 x 1⁄8 0.3311⁄2 x 3⁄16 0.4911⁄2 x 1⁄4 0.6611⁄2 x 3⁄8 0.9811⁄2 x 1⁄2 1.3111⁄2 x 5⁄8 1.6411⁄2 x 3⁄4 1.9711⁄2 x 1 2.6211⁄2 x 11⁄4 3.2813⁄4 x 1⁄4 0.7613⁄4 x 3⁄8 1.1513⁄4 x 1⁄2 1.53
Size Weight (in) per metre (Kg)
13⁄4 x 3⁄4 2.2913⁄4 x 1 3.0613⁄4 x 11⁄4 3.822 x 1⁄8 0.442 x 3⁄16 0.662 x 1⁄4 0.872 x 3⁄8 1.312 x 1⁄2 1.752 x 5⁄8 2.192 x 3⁄4 2.622 x 1 3.502 x 11⁄4 4.372 x 11⁄2 5.2521⁄2 x 3⁄16 0.8221⁄2 x 1⁄4 1.0921⁄2 x 3⁄8 1.6421⁄2 x 1⁄2 2.1921⁄2 x 3⁄4 3.2821⁄2 x 1 4.3721⁄2 x 11⁄2 6.5621⁄2 x 2 8.743 x 1⁄8 0.663 x 3⁄16 0.983 x 1⁄4 1.313 x 3⁄8 1.973 x 1⁄2 2.623 x 5⁄8 3.283 x 1 5.253 x 2 10.5031⁄2 x 1⁄4 1.5231⁄2 x 1⁄2 3.044 x 1⁄8 0.874 x 3⁄16 1.304 x 1⁄4 1.754 x 3⁄8 2.624 x 1⁄2 3.504 x 5⁄8 4.374 x 3⁄4 5.254 x 1 6.994 x 11⁄4 8.744 x 2 14.005 x 1⁄4 2.195 x 1⁄2 4.376 x 1⁄4 2.626 x 3⁄8 3.936 x 1⁄2 5.256 x 1 10.50
5
0271 Aalco Stock List 04 20/9/04 11:48 am Page 3
SQUAREBAR
Alloy 6082-T6
BOX SECTIONSQUARE
Alloy 6063-T6 or6082-T6
BOX SECTIONRECTANGULAR
Alloy 6063-T6 or6082-T6
ALUMINIUM EXTRUSIONS
Size Weight (in) per metre (Kg)
1⁄4 0.115⁄16 0.173⁄8 0.251⁄2 0.445⁄8 0.683⁄4 0.987⁄8 1.341 1.75
Size Weight (in) per metre (Kg)
11⁄4 2.7311⁄2 3.9313⁄4 5.352 6.9921⁄2 10.903 15.7031⁄2 21.404 28.00
Size Weight (in) per metre (Kg)
11⁄2 x 3⁄4 x16 swg 0.4811⁄2 x 1 x1⁄16 0.5211⁄2 x 1 x10 swg 1.002 x 1 x10 swg 1.222 x 11⁄2 x10 swg 1.343 x 1 x10 swg 1.673 x 11⁄2 x10 swg 1.90
Size Weight (in) per metre (Kg)
3 x 13⁄4 x10 swg 2.013 x 2 x10 swg 2.114 x 1 x10 swg 2.124 x 13⁄4 x10 swg 2.454 x 2 x10 swg 2.566 x 2 x10 swg 3.406 x 3 x 3⁄8 10.80
Size Weight (in) per metre (Kg)
1⁄2 x 1⁄2 x 16 swg 0.203⁄4 x 3⁄4 x 16 swg 0.311 x 1 x 16 swg 0.421 x 1 x 10 swg 0.7811⁄4 x 11⁄4 x16 swg 0.5311⁄4 x 11⁄4 x10 swg 1.0011⁄2 x 11⁄2 x16 swg 0.6411⁄2 x 11⁄2 x10 swg 1.23
Size Weight (in) per metre (Kg)
13⁄4 x 13⁄4 x10 swg 1.452 x 2 x16 swg 0.872 x 2 x 10 swg 1.682 x 2 x 1⁄4 3.0621⁄2 x 21⁄2 x10 swg 2.123 x 3 x10 swg 2.574 x 4 x10 swg 3.474 x 4 x 1⁄4 6.56
6
FEATHER EDGEMOULDING
Alloy 6063-T6
Size Weight (in) per metre (Kg)
1 x 1⁄8 0.2211⁄2 x 1⁄8 0.33
0271 Aalco Stock List 04 20/9/04 11:48 am Page 4
TUBEAvailable in one or more of the following alloys
6082-T66063-T6
6063A-T6
SCAFFOLD TUBE
ALUMINIUM EXTRUSIONS
Size Weight (in) per metre (Kg)
3⁄8 o/d x 16 swg 0.111⁄2 o/d x 18 swg 0.121⁄2 o/d x 16 swg 0.151⁄2 o/d x 10 swg 0.265⁄8 o/d x 18 swg 0.155⁄8 o/d x 16 swg 0.205⁄8 o/d x 10 swg 0.353⁄4 o/d x 18 swg 0.193⁄4 o/d x 16 swg 0.243⁄4 o/d x 10 swg 0.447⁄8 o/d x 18 swg 0.227⁄8 o/d x 16 swg 0.297⁄8 o/d x 10 swg 0.531 o/d x 18 swg 0.251 o/d x 16 swg 0.331 o/d x 10 swg 0.611 o/d x 3⁄16 0.8311⁄8 o/d x 18 swg 0.2811⁄8 o/d x 16 swg 0.3711⁄8 o/d x 10 swg 0.7011⁄4 o/d x 18 swg 0.3211⁄4 o/d x 16 swg 0.4211⁄4 o/d x 12 swg 0.6511⁄4 o/d x 10 swg 0.7911⁄4 o/d x 3⁄16 1.0813⁄8 o/d x 16 swg 0.4613⁄8 o/d x 10 swg 0.8811⁄2 o/d x 18 swg 0.3811⁄2 o/d x 16 swg 0.5011⁄2 o/d x 10 swg 0.9611⁄2 o/d x 3⁄16 1.3511⁄2 o/d x 1⁄4 1.7115⁄8 o/d x 16 swg 0.5515⁄8 o/d x 10 swg 1.0515⁄8 o/d x 3⁄16 1.48
Size Weight (in) per metre (Kg)
13⁄4 o/d x 16 swg 0.5913⁄4 o/d x 10 swg 1.1417⁄8 o/d x 10 swg 1.232 o/d x 16 swg 0.682 o/d x 10 swg 1.322 o/d x 3⁄16 1.862 o/d x 1⁄4 2.3921⁄4 o/d x 16 swg 0.7721⁄4 o/d x 10 swg 1.4921⁄2 o/d x 16 swg 0.8621⁄2 o/d x 10 swg 1.6721⁄2 o/d x 3⁄16 2.3821⁄2 o/d x 1⁄4 3.0821⁄2 o/d x 3⁄8 4.3623⁄4 o/d x 10 swg 1.843 o/d x 16 swg 1.033 o/d x 12 swg 1.653 o/d x 10 swg 2.023 o/d x 3⁄16 2.903 o/d x 1⁄4 3.7631⁄2 o/d x 16 swg 1.2131⁄2 o/d x 10 swg 2.3731⁄2 o/d x 1⁄4 4.464 o/d x 16 swg 1.384 o/d x 12 swg 2.234 o/d x 10 swg 2.724 o/d x 1⁄4 5.1541⁄2 o/d x 10 swg 3.0741⁄2 o/d x 1⁄4 5.835 o/d x 10 swg 3.435 o/d x 1⁄4 6.5251⁄2 o/d x 1⁄4 7.216 o/d x 10 swg* 4.136 o/d x 1⁄4 7.9061⁄2 o/d x 1⁄4 8.58
7
Size Weight (in) per metre (Kg)
129⁄32 o/d x 7 swg 1.53
0271 Aalco Stock List 04 20/9/04 11:48 am Page 5
CHANNELAvailable in one or more of the following alloys
6082-T66063-T6
6063A-T6
ALUMINIUM EXTRUSIONS
Size Weight (in) per metre (Kg)
3⁄8 x 3⁄8 x 1⁄16 0.111⁄2 x 1⁄2 x 1⁄8 0.275⁄8 x 5⁄8 x 1⁄16 0.195⁄8 x 5⁄8 x 1⁄8 0.363⁄4 x 1⁄2 x 1⁄8 0.443⁄4 x 3⁄4 x 1⁄16 0.243⁄4 x 3⁄4 x 1⁄8 0.497⁄8 x 7⁄8 x 1⁄8 0.521 x 1⁄2 x 1⁄8 0.381 x 3⁄4 x 1⁄8 0.491 x 1 x 1⁄16 0.311 x 1 x 1⁄8 0.601 x 1 x 3⁄16 0.8611⁄8 x 11⁄8 x 1⁄8 0.6811⁄4 x 1⁄2 x 1⁄8 0.4411⁄4 x 3⁄4 x 1⁄8 0.5511⁄4 x 1 x 1⁄8 0.6611⁄4 x 11⁄4 x 1⁄16 0.3911⁄4 x 11⁄4 x 1⁄8 0.7611⁄4 x 11⁄4 x 3⁄16 1.1011⁄2 x 1⁄2 x 1⁄8 0.4911⁄2 x 3⁄4 x 1⁄8 0.6011⁄2 x 1 x 1⁄8 0.7111⁄2 x 11⁄2 x 1⁄16 0.4911⁄2 x 11⁄2 x 1⁄4 1.7413⁄4 x 1 x 1⁄8 0.7613⁄4 x 13⁄4 x 1⁄8 1.0913⁄4 x 13⁄4 x 1⁄4 2.07
Size Weight (in) per metre (Kg)
2 x 1⁄2 x 1⁄8 0.602 x 3⁄4 x 1⁄8 0.712 x 1 x 1⁄8 0.822 x 1 x 3⁄16 1.222 x 1 x 1⁄4 1.522 x 11⁄2 x 1⁄8 1.032 x 11⁄2 x 1⁄4 1.972 x 2 x 1⁄8 1.262 x 2 x 3⁄16 1.832 x 2 x 1⁄4 2.4021⁄4 x 11⁄4 x 3⁄16 1.4321⁄2 x 1 x 1⁄8 0.9321⁄2 x 11⁄4 x 3⁄16 1.523 x 1 x 1⁄8 1.043 x 11⁄2 x 1⁄8 1.263 x 11⁄2 x 3⁄16 1.843 x 11⁄2 x 1⁄4 x 5⁄16 2.663 x 2 x 1⁄8 1.483 x 2 x 3⁄16 2.173 x 2 x 1⁄4 2.8431⁄2 x 11⁄2 x 1⁄4 x 5⁄16 2.904 x 2 x 1⁄8 1.694 x 2 x 1⁄4 x 5⁄16 3.665 x 2 x 1⁄4 x 5⁄16 4.246 x 2 x 1⁄4 x 5⁄16 4.536 x 3 x 1⁄4 x 3⁄8 6.216 x 3 x 3⁄8 x 1⁄2 8.498 x 3 x 3⁄8 x 1⁄2 9.80
Dimensions are in the order: base x leg x base thickness x leg thickness
8
0271 Aalco Stock List 04 20/9/04 11:48 am Page 6
TEESECTION
Alloy 6082-T6 or6063A-T6
EQUALANGLE
Available in one or more of the following alloys
6082-T66063-T6
6063A-T6
ALUMINIUM EXTRUSIONS
Size Weight (in) per metre (Kg)
3⁄4 x 3⁄4 x 1⁄8 0.301 x 1 x 1⁄8 0.4111⁄4 x 11⁄4 x 1⁄8 0.5211⁄2 x 11⁄2 x 1⁄8 0.6311⁄2 x 11⁄2 x 3⁄16 0.9211⁄2 x 11⁄2 x 1⁄4 1.20
Size Weight (in) per metre (Kg)
1 x 2 x 1⁄8 0.632 x 2 x 1⁄8 0.852 x 2 x 3⁄16 1.252 x 2 x 1⁄4 1.643 x 3 x 1⁄4 2.51
Size Weight (in) per metre (Kg)
1⁄2 x 1⁄2 x 1⁄16 0.101⁄2 x 1⁄2 x 1⁄8 0.195⁄8 x 5⁄8 x 1⁄16 0.135⁄8 x 5⁄8 x 1⁄8 0.253⁄4 x 3⁄4 x 1⁄16 0.163⁄4 x 3⁄4 x 1⁄8 0.307⁄8 x 7⁄8 x 1⁄8 0.361 x 1 x 1⁄16 0.211 x 1 x 1⁄8 0.411 x 1 x 3⁄16 0.591 x 1 x 1⁄4 0.7611⁄8 x 11⁄8 x 1⁄8 0.4611⁄4 x 11⁄4 x 1⁄16 0.2711⁄4 x 11⁄4 x 1⁄8 0.5211⁄4 x 11⁄4 x 3⁄16 0.7611⁄4 x 11⁄4 x 1⁄4 0.9811⁄2 x 11⁄2 x 1⁄16 0.3211⁄2 x 11⁄2 x 1⁄8 0.6311⁄2 x 11⁄2 x 3⁄16 0.92
Size Weight (in) per metre (Kg)
11⁄2 x 11⁄2 x 1⁄4 1.2013⁄4 x 13⁄4 x 1⁄8 0.7413⁄4 x 13⁄4 x 3⁄16 1.0913⁄4 x 13⁄4 x 1⁄4 1.422 x 2 x 1⁄16 0.432 x 2 x 1⁄8 0.852 x 2 x 3⁄16 1.252 x 2 x 1⁄4 1.642 x 2 x 3⁄8 2.3821⁄2 x 21⁄2 x 1⁄8 1.0621⁄2 x 21⁄2 x 3⁄16 1.5821⁄2 x 21⁄2 x 1⁄4 2.083 x 3 x 1⁄8 1.283 x 3 x 3⁄16 1.913 x 3 x 1⁄4 2.513 x 3 x 3⁄8 3.694 x 4 x 1⁄4 3.394 x 4 x 3⁄8 5.006 x 6 x 1⁄2 10.00
Dimensions are in the order: upright x cross piece x thickness
9
0271 Aalco Stock List 04 20/9/04 11:48 am Page 7
UNEQUALANGLE
Available in one or more of the following alloys
6082-T66063-T6
6063A-T6
ALUMINIUM EXTRUSIONS
Size Weight (in) per metre (Kg)
3⁄4 x 1⁄2 x 1⁄16 0.133⁄4 x 1⁄2 x 1⁄8 0.251 x 1⁄2 x 1⁄16 0.151 x 1⁄2 x 1⁄8 0.301 x 5⁄8 x 1⁄8 0.331 x 3⁄4 x 1⁄16 0.181 x 3⁄4 x 1⁄8 0.3611⁄4 x 1⁄2 x 1⁄8 0.3611⁄4 x 3⁄4 x 1⁄8 0.4111⁄4 x 1 x 1⁄8 0.4711⁄2 x 1⁄2 x 1⁄8 0.4111⁄2 x 3⁄4 x 1⁄8 0.4611⁄2 x 1 x 1⁄8 0.5213⁄4 x 3⁄4 x 1⁄8 0.5213⁄4 x 1 x 1⁄8 0.572 x 1⁄2 x 1⁄8 0.522 x 3⁄4 x 1⁄8 0.572 x 1 x 1⁄8 0.632 x 1 x 3⁄16 0.92
Size Weight (in) per metre (Kg)
2 x 1 x 1⁄4 1.202 x 11⁄2 x 1⁄8 0.742 x 11⁄2 x 3⁄16 1.092 x 11⁄2 x 1⁄4 1.4221⁄2 x 1 x 1⁄8 0.7321⁄2 x 11⁄2 x 1⁄8 0.8521⁄2 x 11⁄2 x 3⁄16 1.2521⁄2 x 11⁄2 x 1⁄4 1.643 x 1 x 1⁄8 0.853 x 1 x 1⁄4 1.643 x 11⁄2 x 1⁄8 0.963 x 11⁄2 x 3⁄16 1.403 x 11⁄2 x 1⁄4 1.863 x 2 x 1⁄8 1.073 x 2 x 3⁄16 1.583 x 2 x 1⁄4 2.084 x 1 x 1⁄8 1.064 x 2 x 1⁄4 2.514 x 3 x 1⁄4 2.956 x 3 x 3⁄8 5.63
10
0271 Aalco Stock List 04 20/9/04 11:48 am Page 8
SHEETAlloy 1050-H14
SHEETOther alloys
We have in-housefacilities for Plastic
Coating to suit yourrequirements
ALUMINIUM ROLLED PRODUCTS
Size Weight(mm) per sheet (Kg)
2000 x 1000 x 0.5 2.712500 x 1250 x 0.5 4.232000 x 1000 x 0.6 3.252500 x 1250 x 0.6 5.082000 x 1000 x 0.8 4.342500 x 1250 x 0.8 6.782000 x 1000 x 1.0 5.422500 x 1250 x 1.0 8.473000 x 1250 x 1.0 10.202000 x 1000 x 1.2 6.502500 x 1250 x 1.2 10.203000 x 1250 x 1.2 12.203000 x 1500 x 1.2 14.602000 x 1000 x 1.5 8.132500 x 1250 x 1.5 12.703000 x 1250 x 1.5 15.203000 x 1500 x 1.5 18.302000 x 1000 x 2.0 10.802500 x 1250 x 2.0 16.90
Size Weight(mm) per sheet (Kg)
3000 x 1000 x 2.0 16.303000 x 1250 x 2.0 20.303000 x 1500 x 2.0 24.404000 x 1000 x 2.0 21.734000 x 1250 x 2.0 27.174000 x 1500 x 2.0 32.604000 x 2000 x 2.0 43.792000 x 1000 x 2.5 13.602500 x 1250 x 2.5 21.203000 x 1500 x 2.5 30.502000 x 1000 x 3.0 16.302500 x 1250 x 3.0 25.403000 x 1000 x 3.0 24.403000 x 1250 x 3.0 30.503000 x 1500 x 3.0 36.604000 x 1000 x 3.0 32.534000 x 1250 x 3.0 40.664000 x 1500 x 3.0 48.804000 x 2000 x 3.0 65.00
Size Alloys – 5251-H22 3103-H14 4015-H12 6082-T651(mm)
2000 x 1000 x 1.0 ✓
2500 x 1250 x 1.0 ✓
2000 x 1000 x 1.2 ✓
2500 x 1250 x 1.2 ✓ ✓
3000 x 1500 x 1.2 ✓
2000 x 1000 x 1.5 ✓ ✓
2500 x 1250 x 1.5 ✓ ✓ ✓
3000 x 1500 x 1.5 ✓ ✓
2000 x 1000 x 2.0 ✓ ✓
2500 x 1250 x 2.0 ✓ ✓ ✓ ✓
3000 x 1250 x 2.0 ✓
3000 x 1500 x 2.0 ✓ ✓
2000 x 1000 x 2.5 ✓
2500 x 1250 x 2.5 ✓ ✓
2438 x 1219 x 2.83 ✓
2000 x 1000 x 3.0 ✓
2500 x 1250 x 3.0 ✓ ✓ ✓
3000 x 1250 x 3.0 ✓ ✓
3000 x 1500 x 3.0 ✓ ✓
11
0271 Aalco Stock List 04 20/9/04 11:48 am Page 9
Size Weight(mm) per sheet (Kg)
2000 x 1000 x 0.5 2.712500 x 1250 x 0.5 4.232000 x 1000 x 0.6 3.252500 x 1250 x 0.6 5.082000 x 1000 x 0.7 3.79
Size Weight(mm) per sheet (Kg)
2500 x 1250 x 0.7 5.932000 x 1000 x 0.8 4.342500 x 1250 x 0.8 6.782500 x 1250 x 1.0 8.472500 x 1250 x 1.2 10.20
STUCCO SHEETAlloy 1050-H14
Size Weight(mm) per sheet (Kg)
2438 x 1219 x 2.0 16.82500 x 1250 x 2.0 17.63000 x 1500 x 2.0 25.32000 x 1000 x 3.0 16.72438 x 1219 x 3.0 24.82500 x 1250 x 3.0 26.0
Size Weight(mm) per sheet (Kg)
3000 x 1500 x 3.0 37.52438 x 1219 x 4.5 37.62500 x 1250 x 4.5 39.52438 x 1219 x 6.0 50.62500 x 1250 x 6.0 53.23000 x 1500 x 6.0 76.6
5 BARTREADPLATEAlloy 5754-H111
Size Weight(mm) per sheet (Kg)
2500 x 1250 x 1.5 13.92500 x 1250 x 2.0 18.12500 x 1250 x 3.0 26.6
RICE-GRAINTREADPLATEAlloy 5754-H111
ALUMINIUM ROLLED PRODUCTS12
Product Size Approximate weightCode (mm) per plate (Kg)
ATG15 2500 x 1250 x 1.5 13.2ATG20 2500 x 1250 x 2.0 16.8ATG30 2500 x 1250 x 3.0 26.1
TRIPLEGRIP(ATG)
ALUMINIUMTREADPLATE
Alloy 5052H32
0271 Aalco Stock List 04 20/9/04 11:48 am Page 10
Size Weight(mm) per sheet (Kg)
2500 x 1250 x 4.0 33.92500 x 1250 x 5.0 42.32500 x 1250 x 6.0 50.82500 x 1250 x 8.0 67.8
Size Weight(mm) per sheet (Kg)
2500 x 1250 x 4.0 33.92500 x 1250 x 5.0 42.32500 x 1250 x 6.0 50.8 SHATE
PLATEAlloys 6082-T651
5083-06082-T6
ALUMINIUM ROLLED PRODUCTS 13
Size Weight 5083-0 6082-T651 6082-T6(mm) per plate (kg)
2500 x 1250 x 4.0 33.90 ✓ ✓
2500 x 1250 x 5.0 42.34 ✓ ✓
2500 x 1250 x 6.0 50.78 ✓ ✓
2500 x 1250 x 8.0 67.81 ✓ ✓
2500 x 1250 x 10.0 84.68 ✓ ✓
2500 x 1250 x 12.0 101.56 ✓ ✓
2500 x 1250 x 15.0 127.18 ✓ ✓
2500 x 1250 x 16.0 135.62 ✓
2500 x 1250 x 20.0 169.37 ✓ ✓
2500 x 1250 x 25.0 211.77 ✓ ✓
SHEET – WHITEPAINTED
3105-H46/3003-H45Full White GlossClear Wash CoatLacquer Reverse
50-Micron Polycoated
Size Weight(mm) per sheet (Kg)
2500 x 1250 x 0.9 7.622500 x 1250 x 1.2 10.20
Type 1050Type 6082
0271 Aalco Stock List 04 20/9/04 11:48 am Page 11
ROD CW614N/CZ121M
Free Machining Brass3 metre lengths
BSEN 12164
BRASS14
*Bars over 3 inchesin diameter mayvary in length.
Dia Weight (in) per metre (Kg)
1⁄8 0.073⁄16 0.155⁄32 0.104mm 0.115mm 0.177⁄32 0.216mm 0.241⁄4 0.277mm 0.339⁄32 0.345⁄16 0.428mm 0.4311⁄32 0.519mm 0.543⁄8 0.6110mm 0.6713⁄32 0.1715⁄32 0.957⁄16 0.8212mm 0.961⁄2 1.0813mm 1.1317⁄32 1.229⁄16 1.3614mm 1.3115mm 1.505⁄8 1.6316mm 1.7121⁄32 1.8617mm 1.9211⁄16 2.0418mm 2.1623⁄32 2.233⁄4 2.4220mm 2.6713⁄16 2.8422mm 3.237⁄8 3.3015⁄16 3.7929⁄32 3.5324mm 3.8425mm 4.17
Dia Weight (in) per metre (Kg)
1 4.3111⁄16 4.8626mm 4.5128mm 5.2311⁄8 5.4530mm 6.0113⁄16 6.0711⁄4 6.7315⁄16 7.4213⁄8 8.1435mm 8.1836mm 8.6517⁄16 8.9011⁄2 9.6940mm 10.7015⁄8 11.4013⁄4 13.2017⁄8 15.1050mm 16.702 17.2021⁄8 19.4021⁄4 21.8060mm 24.0023⁄8 24.3021⁄2 26.9065mm 28.2125⁄8 29.7023⁄4 32.603 38.8031⁄4 45.5031⁄2 52.804 68.9041⁄4 77.8041⁄2 87.20130mm 108.00140mm 129.00155mm 155.00180mm 210.00205mm 281.00230mm 353.00255mm 434.00
0271 Aalco Stock List 04 20/9/04 11:48 am Page 12
ROD CW606N/CZ131Riveting Quality Brass
3 metre lengthsBSEN 12164
ROD CW721R & 722R/
CZ114MHigh Tensile Brass/Manganese Bronze
3 metre lengthsBSEN 12163
BRASS
Dia Weight (in) per metre (Kg)
3⁄16 0.155mm 0.171⁄4 0.275⁄16 0.423⁄8 0.6110mm 0.66
Dia Weight (in) per metre (Kg)
7⁄16 0.821⁄2 1.085⁄8 1.683⁄4 2.427⁄8 3.301 4.31
Dia Weight (in) per metre (Kg)
11⁄8 5.4511⁄4 6.7313⁄8 8.1411⁄2 9.6913⁄4 13.202 17.2021⁄4 21.8021⁄2 26.9023⁄4 32.603 38.804 68.90
Dia Weight (in) per metre (Kg)
1⁄4 0.273⁄8 0.617⁄16 0.821⁄2 1.089⁄16 1.325⁄8 1.6811⁄16 1.973⁄4 2.4213⁄16 2.757⁄8 3.301 4.31
15
*Bars over 3 inches in diameter may vary in length.
ROD CW712R/CZ112
Naval Brass3 metre lengths*
BSEN 12163
Dia Weight (in) per metre (Kg)
11⁄2 9.6915⁄8 11.3013⁄4 13.112 17.2021⁄2 26.903 38.804 68.90
Dia Weight (in) per metre (Kg)
1⁄4 0.273⁄8 0.611⁄2 1.085⁄8 1.673⁄4 2.427⁄8 3.281 4.3111⁄4 6.73
0271 Aalco Stock List 04 20/9/04 11:48 am Page 13
HEXAGONCW614N/CZ121M
Free Machining Brass3 metre lengths
BSEN 12164
BRASS
Size AF Weight (in) per metre (Kg)
0.248 0.295mm 0.181⁄4 0.306mm 0.277mm 0.365⁄16 0.468mm 0.470.324 0.503⁄8 0.6710mm 0.7411mm 0.890.445 0.947⁄16 0.9112mm 1.061⁄2 1.1913mm 1.240.525 1.3114mm 1.449⁄16 1.5015mm 1.650.60 1.715⁄8 1.8616mm 1.8817mm 2.1311⁄16 2.2418mm 2.370.71 2.3919mm 2.663⁄4 2.6713⁄16 3.1420mm 2.950.820 3.1922mm 3.56
Size AF Weight (in) per metre (Kg)
7⁄8 3.690.920 4.0215⁄16 4.1724mm 4.241 4.751.010 4.8411⁄16 5.361.100 5.7611⁄8 6.0130mm 6.631.200 6.8411⁄4 7.4232mm 7.541.300 8.0315⁄16 8.2913⁄8 8.9836mm 9.541.480 10.4011⁄2 10.7015⁄8 12.5041mm 12.401.670 13.2013⁄4 14.501.860 16.4046mm 15.6050mm 18.402.050 19.902.200 23.0021⁄2 29.7065mm 31.1023⁄4 35.903 42.70
Size Weight (in) per metre (Kg)
1⁄2 x 1⁄2 x 1⁄8 0.303⁄4 x 3⁄4 x 1⁄8 0.941 x 1 x 1⁄8 1.2911⁄4 x 11⁄4 x 1⁄8 1.6311⁄2 x 11⁄2 x 1⁄8 1.9711⁄2 x 11⁄2 x 3⁄16 2.89
Size Weight (in) per metre (Kg)
11⁄2 x 11⁄2 x 1⁄4 3.772 x 2 x 1⁄8 2.662 x 2 x 3⁄16 3.992 x 2 x 1⁄4 5.1421⁄2 x 21⁄2 x 1⁄4 6.433 x 3 x 1⁄4 7.71
16
ANGLE CW624N/CZ130
12 foot lengthsBSEN 12167
0271 Aalco Stock List 04 20/9/04 11:48 am Page 14
SQUARECW614N/CZ121M
Free Machining Brass3 metre lengths
BSEN 12164
TUBE CW508L/CZ108
Half Hard5 metre lengths
BSEN 12449
BRASS
Size Weight (in) per metre (Kg)
1 5.4811⁄4 8.5711⁄2 12.3013⁄4 16.802 21.9021⁄4 27.8021⁄2 34.0023⁄4 41.503 49.40
Size Weight (in) per metre (Kg)
1⁄8 0.093⁄16 0.191⁄4 0.345⁄16 0.543⁄8 0.777⁄16 1.051⁄2 1.375⁄8 2.143⁄4 3.087⁄8 4.20
Size Weight (in) per metre (Kg)
3⁄8 o/d x 20 swg 0.213⁄8 o/d x 18 swg 0.271⁄2 o/d x 20 swg 0.291⁄2 o/d x 18 swg 0.371⁄2 o/d x 16 swg 0.485⁄8 o/d x 20 swg 0.375⁄8 o/d x 16 swg 0.623⁄4 o/d x 16 swg 0.753⁄4 o/d x 20 swg 0.443⁄4 o/d x 18 swg 0.587⁄8 o/d x 20 swg 0.521 o/d x 20 swg 0.591 o/d x 18 swg 0.781 o/d x 16 swg 1.03
Size Weight (in) per metre (Kg)
1 o/d x 10 swg 1.9111⁄4 o/d x 16 swg 1.3011⁄2 o/d x 20 swg 0.9011⁄2 o/d x 18 swg 1.1911⁄2 o/d x 16 swg 1.5711⁄2 o/d x 10 swg 3.0313⁄4 o/d x 16 swg 1.852 o/d x 20 swg 1.222 o/d x 18 swg 1.602 o/d x 16 swg 2.122 o/d x 10 swg 4.1321⁄2 o/d x 16 swg 2.673 o/d x 16 swg 3.22
17
0271 Aalco Stock List 04 20/9/04 11:48 am Page 15
FLAT BAR CW614N/CZ121 Free Machining Brass
12 foot lengthsBSEN 12167
BRASS
Size Weight (in) per metre (Kg)
3⁄8 x 1⁄8 0.263⁄8 x 3⁄16 0.383⁄8 x 1⁄4 0.521⁄2 x 1⁄8 0.341⁄2 x 3⁄16 0.501⁄2 x 1⁄4 0.691⁄2 x 5⁄16 0.831⁄2 x 3⁄8 1.035⁄8 x 1⁄8 0.435⁄8 x 1⁄4 0.865⁄8 x 3⁄8 1.295⁄8 x 1⁄2 1.713⁄4 x 1⁄8 0.513⁄4 x 3⁄16 0.773⁄4 x 1⁄4 1.033⁄4 x 5⁄16 1.283⁄4 x 3⁄8 1.543⁄4 x 1⁄2 2.063⁄4 x 5⁄8 2.551 x 1⁄8 0.691 x 3⁄16 1.031 x 1⁄4 1.371 x 5⁄16 1.721 x 3⁄8 2.061 x 1⁄2 2.741 x 5⁄8 3.451 x 3⁄4 4.1111⁄4 x 1⁄8 0.8511⁄4 x 1⁄4 1.7111⁄4 x 3⁄8 2.5711⁄4 x 1⁄2 3.4311⁄4 x 3⁄4 5.1411⁄4 x 1 6.8511⁄2 x 1⁄8 1.0311⁄2 x 3⁄16 1.5411⁄2 x 1⁄4 2.0611⁄2 x 3⁄8 3.0811⁄2 x 1⁄2 4.11
Size Weight (in) per metre (Kg)
11⁄2 x 5⁄8 5.1511⁄2 x 3⁄4 6.1111⁄2 x 1 8.2313⁄4 x 1⁄2 4.752 x 1⁄8 1.372 x 3⁄16 2.062 x 1⁄4 2.742 x 3⁄8 4.112 x 1⁄2 5.482 x 5⁄8 6.792 x 3⁄4 8.172 x 1 11.002 x 11⁄4 13.752 x 11⁄2 16.3021⁄2 x 1⁄4 3.4321⁄2 x 3⁄8 5.0821⁄2 x 1⁄2 6.8621⁄2 x 3⁄4 10.0221⁄2 x 1 13.6021⁄2 x 11⁄4 17.0321⁄2 x 11⁄2 20.3021⁄2 x 13⁄4 23.733 x 1⁄8 2.063 x 1⁄4 4.113 x 3⁄8 6.173 x 1⁄2 8.233 x 1 16.503 x 11⁄2 24.703 x 2 32.904 x 1⁄8 2.744 x 1⁄4 5.484 x 3⁄8 8.174 x 1⁄2 11.004 x 3⁄4 16.304 x 1 21.904 x 11⁄2 32.704 x 2 43.90
18
0271 Aalco Stock List 04 20/9/04 11:48 am Page 16
SHEET CW508L-H095/
CZ108-H/H BSEN 1652
BRASS
Size Weight per sheet (Kg)
2m x 1m x .45mm 8.004’ x 2’ x 26 swg 2.902m x 1m x .55mm* 9.304’ x 2’ x 0.55mm 3.452m x 1m x .70mm* 11.804’ x 2’ x 0.70mm 4.408’ x 1m x .90mm 19.002m x 1m x .90mm* 15.204’ x 2’ x 90mm 5.652.5m x 1.25m x 1.2mm 31.728’ x 1mm x 1.2mm* 25.002m x 1m x 1.2mm* 20.304’ x 2’ x 18 swg 7.542.5m x 1.25m x 1.5mm 39.534’ x 2’ x 16 swg 10.00
Size Weight per sheet (Kg)
8’ x 1m x 1.5mm* 31.002m x 1m x 1.5mm* 25.302.5 x 1.25 x 2.0mm 52.812m x 1m x 2.0mm* 33.804’ x 2’ x 2.0mm 12.602m x 1m x 2.5mm* 42.254’ x 2’ x 12 swg 16.702m x 1m x 3.0mm* 50.702.5m x 1.25m x 3.0mm 79.214’ x 2’ x 10 swg 20.402m x 1m x 4mm 67.602m x 1m x 5mm 86.002m x 1m x 3/16” 80.002m x 1m x 1/4” 107.00
Size Weight per sheet (Kg)
2m x 1m x 0.45mm8.002m x 1m x 0.55mm9.304ft x 2ft x 24 swg
Size Weight per sheet (Kg)
4ft x 2ft x 20 swg5.652m x 1m x 1.2mm20.304ft x 2ft x 18 swg
* These sizes are also stocked bright polished and plasticcoated one side.
19
SHEET CW505L/CZ106
70/30 Soft,Spinning Quality
BSEN 1652
0271 Aalco Stock List 04 20/9/04 11:48 am Page 17
ALUMINIUMBRONZE
Grade 2 PART 2NES 833
BRONZE
Dia Weight (in) per metre (Kg)
5⁄8 1.503⁄4 2.177⁄8 2.961 3.8511⁄8 4.8711⁄4 6.0213⁄8 7.2811⁄2 8.6615⁄8 10.2013⁄4 11.802 15.4021⁄8 17.4021⁄4 19.5023⁄8 21.70
Dia Weight (in) per metre (Kg)
21⁄2 24.1025⁄8 26.5023⁄4 29.103 34.7031⁄4 40.7031⁄2 47.2033⁄4 54.504 61.6041⁄2 78.005 96.3051⁄2 116.006 139.007 189.00
20
DRAWN RODPB102BS 2874
Dia Weight (in) per metre (Kg)
1⁄2 1.125⁄8 1.753⁄4 2.527⁄8 3.431 4.4811⁄8 5.6811⁄4 7.0113⁄8 8.4811⁄2 10.0013⁄4 13.70
Dia Weight (in) per metre (Kg)
17⁄8 15.902 17.9021⁄8 20.4021⁄2 28.0023⁄4 33.903 40.4031⁄4 47.6031⁄2 54.904 71.70
0271 Aalco Stock List 04 20/9/04 11:48 am Page 18
BRONZE 21
ROD CA104
Aluminium BronzeBS 2874/BSB 23
Dia Weight (in) per metre (Kg)
2 15.4060mm 21.4065mm 25.2070mm 29.203 34.7031⁄2 47.204 61.60
Dia Weight (in) per metre (Kg)
1⁄2 0.965⁄8 1.5020mm 2.397⁄8 2.951 3.8532mm 6.1111⁄2 8.6645mm 12.00
SHEET CW024A/C106
Soft – Spinning QualityBSEN 1652
Size Weight per sheet (Kg)
4ft x 2ft x 20 swg 5.952m x 1m x 1.2mm 21.404ft x 2ft x 18 swg 7.942m x 1m x 1.5mm 28.50
Size Weight per sheet (Kg)
2m x 1m x 0.55mm 9.794ft x 2ft x 24 swg 3.642m x 1m x 0.7mm 12.502m x 1m x 0.9mm 16.00
0271 Aalco Stock List 04 20/9/04 11:48 am Page 19
FLAT BAR CW004A/C101 Hard Drawn High
ConductivityRadius edge
4-4.2 metre lengthsBSEN 13601
COPPER
Size Weight (in) per metre (Kg)
50mm x 6mm 2.6750mm x 8mm 3.5750mm x 10mm 4.452 x 1⁄8 1.442 x 3⁄16 2.152 x 1⁄4 2.872 x 3⁄8 4.312 x 1⁄ 2 5.742 x 3⁄ 4 8.6160mm x 6mm 3.2060mm x 10mm 5.3421⁄ 2 x 1⁄4 5.5921⁄ 2 x 3⁄8 5.3821⁄ 2 x 1⁄ 2 7.183 x 1⁄4 4.313 x 3⁄8 6.463 x 1⁄ 2 8.6180mm x 10mm 7.1280mm x 12mm 8.54100mm x 6mm 5.34100mm x 10mm 8.90100mm x 12mm 10.604 x 1⁄ 4 5.744 x 3⁄ 8 8.614 x 1⁄ 2 11.50120mm x 6mm 6.42120mm x 10mm 10.705 x 1⁄ 4 7.185 x 1⁄ 2 14.30150mm x 6mm 8.02150mm x 10mm 13.406 x 1⁄ 4 8.616 x 1⁄ 2 17.20160mm x 10mm 14.20200mm x 10mm 17.80
Size Weight (in) per metre (Kg)
1⁄ 2 x 1⁄8 0.361⁄2 x 3⁄16 0.541⁄2 x 1⁄4 0.725⁄8 x 1⁄8 0.453⁄4 x 1⁄8 0.543⁄4 x 3⁄16 0.813⁄4 x 1⁄4 1.0820mm x 5mm 0.8920mm x 6mm 1.0720mm x 10mm 1.7825mm x 3mm 0.6725mm x 5mm 1.1125mm x 6mm 1.3425mm x 10mm 2.221 x 1⁄ 8 0.721 x 3⁄ 16 1.081 x 1⁄4 1.441 x 1⁄ 2 2.8730mm x 3mm 0.8030mm x 5mm 1.3430mm x 6mm 1.6130mm x 10mm 2.6711⁄4 x 1⁄8 0.9011⁄4 x 3⁄16 1.3511⁄4 x 1⁄4 1.7911⁄ 2 x 1⁄8 1.0811⁄ 2 x 1⁄4 2.1511⁄ 2 x 3⁄8 3.2311⁄ 2 x 1⁄ 2 4.3140mm x 5mm 1.7840mm x 6mm 2.14 40mm x 8mm 2.8540mm x 10mm 3.5650mm x 3mm 1.3450mm x 5mm 2.23
22
0271 Aalco Stock List 04 20/9/04 11:48 am Page 20
COPPER 23
SHEET CW024A/C106
Half HardBSEN 1652
SHEET CW004A/C101
Half HardBSEN 1652
Size Weight per sheet (Kg)
4ft x 2ft x 14 swg 13.202m x 1m x 2.5mm 44.504ft x 2ft x 12 swg 17.462.5m x1.25m x 3mm 83.402m x 1m x 3mm 53.404ft x 2ft x 10 swg 21.502m x 1m x 4mm 74.004ft x 2ft x 3⁄16 31.502m x 1m x 5mm 89.002m x 1m x 6mm 106.002.5m x 1.25m x 6mm 174.002.5m x 1.25m x 8mm 235.002.5m x 1.25m x10mm289.00
Size Weight per sheet (Kg)
2m x 1m x 0.55mm 9.794ft x 2ft x 24 swg 3.642m x 1m x 0.7mm 12.504ft x 2ft x 22 swg 4.632m x 1m x 0.9mm 16.004ft x 2ft x 20 swg 5.952.5m x1.25m x 1.2mm 33.302m x 1m x 1.2mm 21.404ft x 2ft x 18 swg 7.942.5m x 1.25m x 1.5mm 41.702m x 1m x 1.5mm 26.724ft x 2ft x 16 swg 10.602.5m x1.25m x 2mm 55.602m x 1m x 2mm 35.60
Size Weight per sheet (Kg)
1200 x 600 x 2mm 12.802m x 1m x 3mm 53.404ft x 2ft x 10 swg 21.502m x1m x 4mm 74.002m x1m x 5mm 89.002m x 1m x 6mm 106.00
Size Weight per sheet (Kg)
2m x 1m x 0.9mm 16.004ft x 2ft x 20 swg 5.942m x 1m x 1.2mm 21.402m x 1m x 1.5mm 26.701200 x 600 x 1.6mm 10.202m x 1m x 2mm 35.60
0271 Aalco Stock List 04 20/9/04 11:48 am Page 21
ROUND BARCW004A/C101 Hard Drawn High
Conductivity4-4.2 metre lengths
BSEN 13601
COPPER
Dia Weight (in) per metre (Kg)
11⁄4 7.0513⁄8 8.5311⁄2 10.0040mm 11.2015⁄8 11.9013⁄4 13.8045mm 14.1050mm 17.402 18.0021⁄4 22.8021⁄2 28.2023⁄4 34.103 40.6031⁄4 45.304 72.20
Dia Weight (in) per metre (Kg)
1⁄4 0.285⁄16 0.443⁄8 0.6310mm 0.7012mm 1.011⁄2 1.135⁄8 1.7616mm 1.7920mm 2.803⁄4 2.547⁄8 3.4525mm 4.391 4.5111⁄8 5.7130mm 6.32
24
ROUND BARCW114C/C111
Hard3-3.2 metre lengths
BSEN 12164
Dia Weight (in) per metre (Kg)
1⁄2 1.133⁄4 2.541 4.51
0271 Aalco Stock List 04 20/9/04 11:48 am Page 22
COPPER 25
Size Weight (in) per metre (Kg)
1⁄4 o/d x 20 swg 0.141⁄4 o/d x 18 swg 0.173⁄8 o/d x 20 swg 0.223⁄8 o/d x 18 swg 0.291⁄2 o/d x 20 swg 0.301⁄2 o/d x 18 swg 0.391⁄2 o/d x 16 swg 0.505⁄8 o/d x 20 swg 0.383⁄4 o/d x 20 swg 0.463⁄4 o/d x 18 swg 0.613⁄4 o/d x 16 swg 0.79
Size Weight (in) per metre (Kg)
7⁄8 o/d x 20 swg 0.547⁄8 o/d x 16 swg 0.947⁄8 o/d x 18 swg 0.721 o/d x 20 swg 0.631 o/d x 18 swg 0.831 o/d x 16 swg 1.0811⁄4 o/d x 16 swg 1.3711⁄2 o/d x 16 swg 1.662 o/d x 16 swg 2.2421⁄2 o/d x 16 swg 2.81
TUBECW024A/C106
Half Hard6 metre lengths
BSEN 12449
If you don’t see what you want – give us a call – our range
is always expanding
0271 Aalco Stock List 04 20/9/04 11:48 am Page 23
ROUND303S31 (1.4305)
Bright Drawn
ROUND303S31 (1.4305)
Smooth Turned/*Bright Ground
ROUND303S31 (1.4305)
Rough Turned
STAINLESS STEEL BAR AND SECTIONS
Dia Weight (in) per metre (Kg)
3mm 0.061⁄8” 0.064mm 0.103⁄16” 0.145mm 0.161⁄4” 0.256mm 0.227mm 0.305⁄16” 0.398mm 0.403⁄8” 0.5610mm 0.627⁄16” 0.7712mm 0.891⁄2” 1.00
Dia Weight (in) per metre (Kg)
9⁄16” 1.2214mm 1.2215mm 1.405⁄8” 1.5616mm 1.5911⁄16” 1.8918mm 2.013⁄4” 2.2520mm 2.4822mm 3.007⁄8” 3.0724mm 3.5725mm 3.881” 4.03
Dia Weight (in) per metre (Kg)
25mm* 3.881” 4.0311⁄8” 5.0730mm* 5.5811⁄4” 6.2513⁄8” 7.5735mm 7.6011⁄2” 9.0140mm* 9.9315⁄8” 10.6013⁄4” 12.2045mm 12.56
Dia Weight (in) per metre (Kg)
17⁄8” 14.1050mm* 15.502” 16.0021⁄8” 18.1021⁄4” 20.3060mm 22.3023⁄8” 22.6021⁄2” 25.0025⁄8” 27.6023⁄4” 30.303” 36.00
Dia Weight (in) per metre (Kg)
31⁄4” 42.9031⁄2” 49.8033⁄4” 57.104” 65.0041⁄4” 73.4041⁄2” 82.30
Dia Weight (in) per metre (Kg)
43⁄4” 91.705” 102.0051⁄2” 123.006” 146.007” 199.00
26
0271 Aalco Stock List 04 20/9/04 11:48 am Page 24
STAINLESS STEEL BAR AND SECTIONS 27
Dia Weight (in) per metre (Kg)
3mm 0.061⁄8” 0.064mm 0.103⁄16” 0.145mm 0.166mm 0.221⁄4” 0.255⁄16” 0.398mm 0.403⁄8” 0.5610mm 0.627⁄16” 0.77
Dia Weight (in) per metre (Kg)
12mm 0.891⁄2” 1.009⁄16” 1.2715mm 1.405⁄8” 1.5611⁄16” 1.893⁄4” 2.2520mm 2.487⁄8” 3.0725mm 3.881” 4.03
Dia Weight (in) per metre (Kg)
25mm 3.881” 4.0311⁄8” 5.0730mm 5.5811⁄4” 6.2513⁄8” 7.5711⁄2” 9.0140mm 9.9315⁄8” 10.60
Dia Weight (in) per metre (Kg)
13⁄4” 12.2050 mm 15.502” 16.0021⁄4” 20.3060 mm 22.3021⁄2” 25.0023⁄4” 30.303” 36.00
ROUND304S31 (1.4301)
Bright Drawn IMA
ROUND304S31 (1.4301)Smooth Turned IMA
0271 Aalco Stock List 04 20/9/04 11:48 am Page 25
ROUND304S11/S31
(1.4307) Rough Turned
ROUND316S11/S31
(1.4404)Bright Drawn IMA
STAINLESS STEEL BAR AND SECTIONS
Dia Weight (in) per metre (Kg)
3” 36.0031⁄4” 42.9031⁄2” 49.8033⁄4” 57.104” 65.0041⁄4” 73.4041⁄2” 82.305” 102.0051⁄4” 111.9851⁄2” 123.0053⁄4” 134.006” 146.00
Dia Weight (in) per metre (Kg)
61⁄2” 172.007” 199.0071⁄2” 229.008” 260.0081⁄2” 294.009” 329.0010” 406.0011” 492.0012” 585.00340mm 728.0016” 1040.00
Dia Weight (in) per metre (Kg)
3mm 0.061⁄8” 0.06
4mm 0.103⁄16” 0.145mm 0.166mm 0.231⁄4” 0.255⁄16” 0.398mm 0.403⁄8” 0.5710mm 0.637⁄16” 0.7712mm 0.901⁄2” 1.01
Dia Weight (in) per metre (Kg)
14mm 1.239⁄16” 1.2815mm 1.415⁄8” 1.5816mm 1.6011⁄16” 1.9118mm 2.033⁄4” 2.2720mm 2.507⁄8” 3.0924mm 3.6025mm 3.911” 4.03
28
0271 Aalco Stock List 04 20/9/04 11:48 am Page 26
STAINLESS STEEL BAR AND SECTIONS 29
Dia Weight (in) per metre (Kg)
7⁄8” 3.0925mm* 3.911”* 4.0311⁄8”* 5.1130mm* 5.6311⁄4”* 6.3032mm 6.4013⁄8”* 7.6335mm* 7.6611⁄2”* 9.0840mm* 10.0015⁄8”* 10.7013⁄4”* 12.40
Dia Weight (in) per metre (Kg)
45mm 12.7017⁄8”* 14.2050mm 15.602”* 16.1021⁄8”* 18.2021⁄4”* 20.4023⁄8”* 22.8060mm* 22.5021⁄2”* 25.2025⁄8” 27.8023⁄4”* 30.503”* 36.30
ROUND316S11/S31
(1.4404)Smooth Turned
*Bright Ground IMA
0271 Aalco Stock List 04 20/9/04 11:48 am Page 27
ROUND316S11/S31
(1.4404) Rough Turned
STAINLESS STEEL BAR AND SECTIONS
Dia Weight (in) per metre (Kg)
3” 36.3031⁄4” 43.2031⁄2” 50.2033⁄4” 57.604” 65.5041⁄4” 73.9041⁄2” 82.9043⁄4” 92.405” 102.0051⁄4” 113.0051⁄2” 123.0053⁄4” 135.006” 147.0061⁄4” 160.0061⁄2” 173.007” 201.00
Dia Weight (in) per metre (Kg)
185mm 217.0071⁄4” 215.0071⁄2” 230.008” 262.0081⁄2” 296.00220mm 307.009” 332.0091⁄2” 370.0010” 409.00101⁄2” 451.0011” 495.0012” 590.00340mm 734.0014” 802.0016” 1049.00
30
0271 Aalco Stock List 04 20/9/04 11:48 am Page 28
STAINLESS STEEL BAR AND SECTIONS 31
Size Weight (mm) per metre (Kg)
20 x 10 1.5825 x 10 1.9830 x 10 2.3740 x 10 3.1650 x 10 3.9560 x 10 4.7475 x 10 5.93100 x 10 7.9025 x 12 2.3730 x 12 2.8440 x 12 3.7950 x 12 4.7460 x 12 5.6975 x 12 7.11100 x 12 9.4825 x 15 2.9630 x 15 3.5640 x 15 4.74
Size Weight (mm) per metre (Kg)
50 x 15 5.9360 x 15 7.1175 x 15 8.88100 x 15 11.9025 x 20 3.9530 x 20 4.7440 x 20 6.3250 x 20 7.9060 x 20 9.4875 x 20 11.90100 x 20 15.8030 x 25 5.9340 x 25 7.9050 x 25 9.8860 x 25 11.9075 x 25 14.80100 x 25 19.80
Size Weight (in) per metre (Kg)
.3125” 0.43
.324” 0.46
.375” 0.62
.437” 0.84
.500” 1.10
.525” 1.22
.562” 1.39
.600” 1.59
.625” 1.73
.710” 2.22
.750” 2.48
.812” 2.91
.820” 2.97
.875” 3.38
.920” 3.74
.9375” 3.88
Size Weight (in) per metre (Kg)
1.010” 4.501.100” 5.351.125” 5.591.200” 6.361.250” 6.901.300” 7.461.375” 8.351.480” 9.671.500” 9.931.670” 12.301.750” 13.501.860” 15.302.200” 21.402.220” 21.802.375” 24.902.500” 27.60
FLAT 304S11/S31 &316S11/S31
(1.4307+1.4404)HOT ROLLED
HEXAGON303S31 &
316S11/S31(1.4305+1.4404)
0271 Aalco Stock List 04 20/9/04 11:48 am Page 29
FLAT 304 & 316L
(1.4301+1.4404)ROLLED EDGE
STAINLESS STEEL BAR AND SECTIONS
Size Weight (mm) per metre (Kg)
12 x 3 0.2820 x 3 0.4725 x 3 0.5930 x 3 0.7140 x 3 0.9550 x 3 1.1960 x 3 1.4275 x 3 1.78100 x 3 2.3712 x 5 0.4720 x 5 0.7925 x 5 0.9930 x 5 1.1940 x 5 1.5845 x 5 1.7850 x 5 1.9860 x 5 2.3775 x 5 2.96100 x 5 3.9512 x 6 0.5720 x 6 0.9525 x 6 1.1930 x 6 1.4240 x 6 1.9045 x 6 2.13
Size Weight (mm) per metre (Kg)
50 x 6 2.3760 x 6 2.8475 x 6 3.56100 x 6 4.7425 x 8 1.5830 x 8 1.9040 x 8 2.5350 x 8 3.1660 x 8 3.7975 x 8 4.74100 x 8 6.3225 x 10 1.9830 x 10 2.3740 x 10 3.1650 x 10 3.9560 x 10 4.7475 x 10 5.93100 x 10 7.9025 x 12 2.3730 x 12 2.8440 x 12 3.7950 x 12 4.7460 x 12 5.6975 x 12 7.11100 x 12 9.48
32
0271 Aalco Stock List 04 20/9/04 11:48 am Page 30
STAINLESS STEEL WELDED MESH 33
STAINLESS STEEL BAR AND SECTIONS
Size Weight (mm) per metre (Kg)
12 x 12 1.1416 x 16 2.0220 x 20 3.1625 x 25 4.94
Size Weight (mm) per metre (Kg)
30 x 30 7.1140 x 40 12.6050 x 50 19.80
Size Weight (mm) per metre (Kg)
20 x 20 x 3 0.8825 x 25 x 3 1.1225 x 25 x 5 1.7825 x 25 x 6 2.0930 x 30 x 3 1.3530 x 30 x 5 2.1730 x 30 x 6 2.5640 x 40 x 3 1.8340 x 40 x 5 2.9640 x 40 x 6 3.5150 x 50 x 3 2.3050 x 50 x 5 3.7550 x 50 x 6 4.46
Size Weight (mm) per metre (Kg)
50 x 50 x 10 7.1160 x 60 x 5 4.5860 x 60 x 6 5.4060 x 60 x 10 8.6970 x 70 x 6 6.3570 x 70 x 10 10.3075 x 75 x 6 7.3775 x 75 x 10 11.9580 x 80 x 6 7.8980 x 80 x 10 12.80100 x 100 x 6 9.20100 x 100 x 10 15.00
Size Weight (ins) per panel (Kg)
96” x 48” x 1/2” x 1/2” x 16 swg 6.5096” x 48” x 3” x 1/2” x 10 swg 16.0096” x 48” x 3” x 1/2” x 12 swg 11.0096” x 48” x 1” x 1” x 10 swg 13.0096” x 48” x 1” x 1” x 12 swg 9.5096” x 48” x 11/2” x 11/2” x 10 swg 9.0096” x 48” x 2” x 2” x 10 swg 7.0096” x 48” x 2” x 2” x 12 swg 5.00
SQUARE304S11/S31 &316S11/S31
(1.4307+1.4404)
ANGLE 304S31 &
316S11/S31(1.4301+1.4404)
WELDED MESHTYPE 304
0271 Aalco Stock List 04 20/9/04 11:48 am Page 31
STAINLESS STEEL ROLLED PRODUCTS34
SHEET 1.4301 (304)Polished 240 grit, white poly coat
SHEET 1.4401 (316)Polished 240 grit, white poly coat
SHEET 1.4016 (430)Polished 240 grit, black poly coat
Size Weight (mm) per sheet (Kg)
2000 x 1000 x 0.7 11.52500 x 1250 x 0.7 17.92000 x 1000 x 0.9 14.72500 x 1250 x 0.9 23.02000 x 1000 x 1.0 16.42500 x 1250 x 1.0 25.63000 x 1500 x 1.0 36.82000 x 1000 x 1.2 19.62500 x 1250 x 1.2 30.73000 x 1500 x 1.2 44.22000 x 1000 x 1.5 24.6
Size Weight (mm) per sheet (Kg)
2500 x 1250 x 1.5 38.43000 x 1500 x 1.5 55.32000 x 1000 x 2.0 32.72500 x 1250 x 2.0 51.23000 x 1500 x 2.0 73.72000 x 1000 x 2.5 40.92500 x 1250 x 2.5 63.93000 x 1500 x 2.5 92.12000 x 1000 x 3.0 49.62500 x 1250 x 3.0 77.53000 x 1500 x 3.0 112.0
Size Weight (mm) per sheet (Kg)
2500 x 1250 x 1.2 30.73000 x 1500 x 1.2 44.22500 x 1250 x 1.5 38.43000 x 1500 x 1.5 55.3
Size Weight (mm) per sheet (Kg)
2500 x 1250 x 2.0 51.23000 x 1500 x 2.0 73.72500 x 1250 x 3.0 77.53000 x 1500 x 3.0 112.0
Size Weight (mm) per sheet (Kg)
2000 x 1000 x 0.7 11.52500 x 1250 x 0.7 17.92000 x 1000 x 0.9 14.72500 x 1250 x 0.9 23.02000 x 1000 x 1.0 16.4
Size Weight (mm) per sheet (Kg)
2500 x 1250 x 1.0 25.62000 x 1000 x 1.2 19.62500 x 1250 x 1.2 30.72000 x 1000 x 1.5 24.62500 x 1250 x 1.5 38.4
We have in-house facilities for Plastic Coating andPolishing Sheets.
0271 Aalco Stock List 04 20/9/04 11:48 am Page 32
STAINLESS STEEL ROLLED PRODUCTS 35
Size Weight (mm) per sheet (Kg)
2000 x 1000 x 0.5 8.22500 x 1250 x 0.5 12.82000 x 1000 x 0.7 11.52500 x 1250 x 0.7 17.92000 x 1000 x 0.8 13.12500 x 1250 x 0.8 20.52000 x 1000 x 0.9 14.72500 x 1250 x 0.9 23.03000 x 1500 x 0.9 33.22000 x 1000 x 1.0 16.42500 x 1250 x 1.0 25.63000 x 1500 x 1.0 36.82000 x 1000 x 1.2 19.62500 x 1250 x 1.2 30.7
Size Weight (mm) per sheet (Kg)
3000 x 1500 x 1.2 44.22000 x 1000 x 1.5 24.62500 x 1250 x 1.5 38.43000 x 1500 x 1.5 55.32000 x 1000 x 2.0 32.72500 x 1250 x 2.0 51.23000 x 1500 x 2.0 73.72000 x 1000 x 2.5 40.92500 x 1250 x 2.5 63.93000 x 1500 x 2.5 92.12000 x 1000 x 3.0 49.62500 x 1250 x 3.0 77.53000 x 1500 x 3.0 112.0
Size Weight (mm) per sheet (Kg)
2000 x 1000 x 0.5 8.22500 x 1250 x 0.5 12.82000 x 1000 x 0.7 11.52500 x 1250 x 0.7 17.92500 x 1250 x 0.8 20.52000 x 1000 x 0.9 14.72500 x 1250 x 0.9 23.02000 x 1000 x 1.0 16.4
Size Weight (mm) per sheet (Kg)
2500 x 1250 x 1.0 25.62000 x 1000 x 1.2 19.62500 x 1250 x 1.2 30.72000 x 1000 x 1.5 24.62500 x 1250 x 1.5 38.42000 x 1000 x 2.0 32.72500 x 1250 x 2.0 51.2
Size Weight (mm) per sheet (Kg)
2000 x 1000 x 0.7 11.52500 x 1250 x 0.7 17.92000 x 1000 x 0.9 14.72500 x 1250 x 0.9 23.02500 x 1250 x 1.0 25.62000 x 1000 x 1.2 19.62500 x 1250 x 1.2 30.73000 x 1500 x 1.2 44.22000 x 1000 x 1.5 24.62500 x 1250 x 1.5 38.4
Size Weight (mm) per sheet (Kg)
3000 x 1500 x 1.5 55.32000 x 1000 x 2.0 32.72500 x 1250 x 2.0 51.23000 x 1500 x 2.0 73.72000 x 1000 x 2.5 40.92500 x 1250 x 2.5 63.93000 x 1500 x 2.5 92.12000 x 1000 x 3.0 49.62500 x 1250 x 3.0 77.53000 x 1500 x 3.0 112.0
SHEET1.4301 (304)
2B Finish
SHEET 1.4301 (304)
2R (BA) Finish
SHEET1.4401 (316)
2B Finish
0271 Aalco Stock List 04 20/9/04 11:48 am Page 33
STAINLESS STEEL ROLLED PRODUCTS36
PLATE/SHEET1.4003
SHEET1.4016 (430)
2R (BA) Finish
Size Weight (mm) per sheet (Kg)
2000 x 1000 x 0.5 8.22500 x 1250 x 0.5 12.82000 x 1000 x 0.7 11.52500 x 1250 x 0.7 17.92500 x 1250 x 0.8 20.52000 x 1000 x 0.9 14.72500 x 1250 x 0.9 23.02000 x 1000 x 1.0 16.4
Size Weight (mm) per sheet (Kg)
2500 x 1250 x 1.0 25.62000 x 1000 x 1.2 19.62500 x 1250 x 1.2 30.72000 x 1000 x 1.5 24.62500 x 1250 x 1.5 38.42000 x 1000 x 2.0 32.72500 x 1250 x 2.0 51.2
Size Weight (mm) per plate (Kg)
2500 x 1250 x 2.0 50.92500 x 1250 x 3.0 76.43000 x 1500 x 3.0 110.02500 x 1250 x 4.0 102.03000 x 1500 x 4.0 147.02500 x 1250 x 5.0 127.02500 x 1250 x 6.0 153.0
Size Weight (mm) per sheet (Kg)
2500 x 1250 x 1.0 24.52000 x 1000 x 1.5 24.52500 x 1250 x 1.5 38.23000 x 1500 x 1.5 55.02000 x 1000 x 2.0 32.62500 x 1250 x 2.0 50.93000 x 1500 x 2.0 73.42500 x 1250 x 2.5 63.7
Size Weight (mm) per plate (Kg)
4000 x 2000 x 2.0 136.04000 x 2000 x 3.0 204.02500 x 1250 x 4.0 106.03000 x 1500 x 4.0 153.04000 x 2000 x 4.0 272.02500 x 1250 x 5.0 133.0
Size Weight (mm) per plate (Kg)
3000 x 1500 x 5.0 191.04000 x 2000 x 5.0 340.02500 x 1250 x 6.0 159.03000 x 1500 x 6.0 230.04000 x 2000 x 6.0 408.0
PLATE COLDROLLED
DESCALEDASTM A240, ASME SA 240 TYPE 304L
AND 316L
Hot Rolled ID Finish Cold Rolled 2B Finish
0271 Aalco Stock List 04 20/9/04 11:48 am Page 34
STAINLESS STEEL ROLLED PRODUCTS 37
CPP PLATE1D Finish
ASTM A240, ASMESA240: 304, 304L,
316, 316L, EN10088-2: 1.4301,
1.4307, 1.4401, 1.4404,
QUARTO PLATE1D Finish
ASTM A240, ASMESA240: 304, 304L,
316, 316L, EN10088-2: 1.4301,
1.4307, 1.4401, 1.4404, BS1501 Pt3: 304S31,
304S11, 316S31, 316S11,
Size Weight (mm) per plate (Kg)
2000 x 1000 x 3.0 51.02500 x 1250 x 3.0 79.73000 x 1500 x 3.0 115.02000 x 1000 x 4.0 68.02500 x 1250 x 4.0 106.03000 x 1500 x 4.0 153.02000 x 1000 x 5.0 85.02500 x 1250 x 5.0 133.03000 x 1500 x 5.0 191.04000 x 2000 x 5.0 340.02000 x 1000 x 6.0 102.02500 x 1250 x 6.0 159.03000 x 1500 x 6.0 230.0
Thickness Unit Weight (mm) per sq Metre (Kg)
5 42.56 51.08 68.0
10 85.012 102.015 128.016 136.020 170.022 187.025 213.030 255.032 272.0
Thickness Unit Weight (mm) per sq Metre (Kg)
35 298.040 340.045 383.050 426.055 468.060 510.065 553.070 596.075 638.090 765.0100 850.0125 1063.0
Size Weight (mm) per plate (Kg)
4000 x 2000 x 6.0 408.02500 x 1250 x 8.0 213.03000 x 1500 x 8.0 306.04000 x 2000 x 8.0 544.02500 x 1250 x 10.0 266.03000 x 1500 x 10.0 383.04000 x 1500 x 10.0 510.04000 x 2000 x 10.0 680.02500 x 1250 x 12.0 319.03000 x 1500 x 12.0 459.04000 x 1500 x 12.0 612.04000 x 2000 x 12.0 816.0
Thickness Unit Weight on base (mm) per plate (Kg)
3000 x 1000 x 3.0 78.03000 x 1250 x 4.5 143.03000 x 1250 x 6.0 180.03000 x 1250 x 8.0 210.0
STAINLESSTREADPLATE
AISI 304, Dual Certifiedto DIN 59220 (T) &
ASTM A793/96Pattern 1
0271 Aalco Stock List 04 20/9/04 11:48 am Page 35
STAINLESS STEEL SEAMLESS PIPE38
SEAMLESS PIPEASTM A312, 304L
SEAMLESS PIPEASTM A312, 316L
NPS/NB SCH SCH SCH(in) 10S 40S 80S
1⁄4 – ✔ ✔3⁄8 ✔ ✔ ✔1⁄2 ✔ ✔ ✔3⁄4 – ✔ ✔
1 ✔ ✔ ✔
11⁄4 – ✔ ✔
11⁄2 ✔ ✔ ✔
2 ✔ ✔ ✔
21⁄2 ✔ ✔ –3 ✔ ✔ ✔
4 ✔ ✔ ✔
6 ✔ ✔ ✔
8 – ✔ ✔
NPS/NB SCH SCH SCH SCH (in) 10S 40S 80S 160
1⁄8 ✔ ✔ – –1⁄4 ✔ ✔ ✔ –3⁄8 ✔ ✔ ✔ –1⁄2 ✔ ✔ ✔ ✔3⁄4 ✔ ✔ ✔ ✔
1 ✔ ✔ ✔ ✔
11⁄4 – – ✔ –11⁄2 ✔ ✔ ✔ ✔
2 ✔ ✔ ✔ ✔
21⁄2 ✔ ✔ ✔ –3 ✔ ✔ ✔ ✔
31⁄2 ✔ ✔ – –4 ✔ ✔ ✔ –5 – ✔ – –6 ✔ ✔ ✔ –8 ✔ ✔ ✔ –
0271 Aalco Stock List 04 20/9/04 11:48 am Page 36
STAINLESS STEEL SEAMLESS BUTT WELD FITTINGS 39
SEAMLESS BUTTWELD FITTINGS
ASTM A403, 316L
NPS/NB EQUAL TEES END CAPS(in)
SCH SCH SCH SCH10S 40S 10S 40S
1⁄2 ✔ ✔ ✔ –3⁄4 ✔ ✔ ✔ –1 ✔ ✔ ✔ ✔
11⁄4 – – ✔ ✔
11⁄2 ✔ ✔ ✔ –2 ✔ ✔ ✔ –
21⁄2 – – ✔ ✔
3 ✔ ✔ ✔ ✔
4 ✔ – ✔ –6 ✔ – ✔ –8 – – – ✔
12 – – ✔ –
NPS/NB 90° LR ELBOWS 45° LR ELBOWS STUB(in) ENDS
SCH SCH SCH SCH SCH SCH10S 40S 80S 10S 40S 10S
1⁄2 ✔ ✔ ✔ – ✔ –3⁄4 ✔ ✔ ✔ ✔ – –1 ✔ ✔ ✔ ✔ – ✔
11⁄2 ✔ ✔ – ✔ ✔ ✔
2 ✔ ✔ ✔ ✔ ✔ ✔
21⁄2 ✔ – – – – –3 ✔ ✔ – ✔ – ✔
4 ✔ ✔ – ✔ – ✔
6 ✔ ✔ – – – ✔
8 ✔ – – – – –
0271 Aalco Stock List 04 20/9/04 11:48 am Page 37
STAINLESS STEEL SEAMLESS BUTT WELD FITTINGS40
SEAMLESS BUTTWELD FITTINGS
ASTM A403, 304L
NPS/NB EQUAL TEES END CAPS(in)
SCH SCH SCH SCH10S 40S 10S 40S
1⁄2 – ✔ ✔ –3⁄4 – – ✔ –1 ✔ ✔ ✔ –
11⁄4 – – ✔ –11⁄2 ✔ – ✔ –2 ✔ ✔ – ✔
21⁄2 – – ✔ –3 – – ✔ –4 ✔ – ✔ –
NPS/NB 90° LR ELBOWS
(in)
SCH SCH SCH10S 40S 80S
1⁄2 ✔ ✔ ✔3⁄4 ✔ – –1 ✔ ✔ –
11⁄2 ✔ ✔ –2 ✔ ✔ –
21⁄2 ✔ – –3 ✔ ✔ –4 ✔ ✔ –6 ✔ – –8 ✔ – –
SEAMLESS BUTTWELD FITTINGS
ASTM A403, 304L
NPS/NB CON RED(in)
SCH SCH10S 40S
3⁄4 x 1⁄2 ✔ –11⁄2 x 1 ✔ –2 x 1 ✔ ✔
2 x 11⁄4 – ✔
4 x 2 ✔ –4 x 3 ✔ –6 x 3 ✔ –
0271 Aalco Stock List 04 20/9/04 11:48 am Page 38
STAINLESS STEEL SEAMLESS BUTT WELD FITTINGS 41
SEAMLESS BUTTWELD FITTINGS
ASTM A403, 316L
NPS/NB CON RED(in)
SCH SCH SCH10S 40S 80S
3⁄4 x 1⁄2 ✔ ✔ ✔
1 x 1⁄2 ✔ ✔ ✔
1 x 3⁄4 ✔ ✔ ✔
11⁄4 x 1 ✔ ✔ –11⁄2 x 1⁄2 ✔ ✔ –11⁄2 x 3⁄4 ✔ ✔ –11⁄2 x 1 ✔ ✔ ✔
11⁄2 x 11⁄4 ✔ ✔ –2 x 1⁄2 ✔ – –2 x 3⁄4 ✔ ✔ –2 x 1 ✔ ✔ ✔
2 x 11⁄4 ✔ ✔ –2 x 11⁄2 ✔ ✔ –
21⁄2 x 11⁄2 – – –21⁄2 x 2 ✔ ✔ –3 x 1 ✔ ✔ –
3 x 11⁄4 ✔ – –3 x 11⁄2 ✔ ✔ ✔
3 x 2 ✔ ✔ ✔
3 x 21⁄2 ✔ ✔ –4 x 11⁄2 ✔ – –4 x 2 ✔ ✔ –
4 x 21⁄2 – – –4 x 3 ✔ ✔ ✔
5 x 3 ✔ ✔ –6 x 3 ✔ ✔ –6 x 4 ✔ ✔ –6 x 5 ✔ – –8 x 4 ✔ – –8 x 6 ✔ – –
0271 Aalco Stock List 04 20/9/04 11:48 am Page 39
STAINLESS STEEL WELDED PIPE42
WELDED PIPEASTM A312, 304L & 316L
ASTM A312, 304L
NPS/NB SCH SCH SCH (in) 5S 10S 40S
1⁄2 ✔ ✔ ✔3⁄4 ✔ ✔ ✔
1 ✔ ✔ ✔
11⁄4 ✔ ✔ ✔
11⁄2 ✔ ✔ ✔
2 ✔ ✔ ✔
21⁄2 ✔ ✔ ✔
3 ✔ ✔ ✔
31⁄2 – ✔ ✔
4 ✔ ✔ ✔
5 – ✔ ✔
6 ✔ ✔ ✔
8 ✔ ✔ ✔
10 ✔ ✔ ✔
12 ✔ ✔ ✔
14 – ✔ –16 – ✔ –18 – ✔ –20 – ✔ –24 – ✔ –
ASTM A312, 316L
NPS/NB SCH SCH SCH (in) 5S 10S 40S
1⁄2 ✔ ✔ ✔3⁄4 ✔ ✔ ✔
1 ✔ ✔ ✔
11⁄4 ✔ ✔ ✔
11⁄2 ✔ ✔ ✔
2 ✔ ✔ ✔
21⁄2 ✔ ✔ ✔
3 ✔ ✔ ✔
4 ✔ ✔ ✔
5 – ✔ ✔
6 ✔ ✔ ✔
8 ✔ ✔ ✔
10 ✔ ✔ ✔
12 ✔ ✔ ✔
14 – ✔ –16 – ✔ –18 – ✔ –20 – ✔ –24 – ✔ –
0271 Aalco Stock List 04 20/9/04 11:48 am Page 40
STAINLESS STEEL WELDED BUTT WELD FITTINGS 43
WELDED BUTTWELD FITTINGS
ASTM A403, 304L
NPS/NB 90° LR ELBOWS 45° LR ELBOWS EQUAL TEES STUB(in) ENDS
SCH SCH SCH SCH SCH SCH SCH10S 40S 10S 40S 10S 40S 10S
1⁄2 ✔ ✔ ✔ ✔ ✔ ✔ ✔3⁄4 ✔ ✔ ✔ ✔ ✔ ✔ ✔
1 ✔ ✔ ✔ ✔ ✔ ✔ ✔
11⁄4 ✔ ✔ ✔ ✔ ✔ ✔ ✔
11⁄2 ✔ ✔ ✔ ✔ ✔ ✔ ✔
2 ✔ ✔ ✔ ✔ ✔ ✔ ✔
21⁄2 ✔ ✔ ✔ ✔ ✔ ✔ ✔
3 ✔ ✔ ✔ ✔ ✔ ✔ ✔
4 ✔ ✔ ✔ ✔ ✔ ✔ ✔
5 – – – – ✔ – –6 ✔ ✔ ✔ ✔ ✔ ✔ ✔
8 ✔ ✔ ✔ – ✔ ✔ ✔
10 ✔ – ✔ – ✔ ✔ ✔
12 ✔ – ✔ – ✔ ✔ ✔
14 ✔ – ✔ – – – –16 ✔ – ✔ – – – –18 ✔ – – – – – –20 ✔ – – – – – –22 ✔ – – – – – –24 ✔ – – – – – –
0271 Aalco Stock List 04 20/9/04 11:48 am Page 41
STAINLESS STEEL WELDED BUTT WELD FITTINGS44
WELDED BUTTWELD FITTINGS
ASTM A403, 316L
NPS/NB 90° LR ELBOWS 45° LR ELBOWS EQUAL TEES STUB(in) ENDS
SCH SCH SCH SCH SCH SCH SCH10S 40S 10S 40S 10S 40S 10S
1⁄2 ✔ ✔ ✔ ✔ ✔ ✔ ✔3⁄4 ✔ ✔ ✔ ✔ ✔ ✔ ✔
1 ✔ ✔ ✔ ✔ ✔ ✔ ✔
11⁄4 ✔ ✔ ✔ ✔ ✔ ✔ ✔
11⁄2 ✔ ✔ ✔ ✔ ✔ ✔ ✔
2 ✔ ✔ ✔ ✔ ✔ ✔ ✔
21⁄2 ✔ ✔ ✔ ✔ ✔ ✔ ✔
3 ✔ ✔ ✔ ✔ ✔ ✔ ✔
4 ✔ ✔ ✔ ✔ ✔ ✔ ✔
5 ✔ ✔ ✔ – ✔ – –6 ✔ ✔ ✔ ✔ ✔ ✔ ✔
8 ✔ ✔ ✔ ✔ ✔ ✔ ✔
10 ✔ ✔ ✔ – ✔ – ✔
12 ✔ ✔ ✔ – – ✔ ✔
14 ✔ – ✔ – – – –16 ✔ – ✔ – – – –18 ✔ – ✔ – – – –20 ✔ – ✔ – – – –22 ✔ – – – – – –24 ✔ – – – – – –
If you don’t see what you want – give us a call – our range is always
expanding
0271 Aalco Stock List 04 20/9/04 11:48 am Page 42
STAINLESS STEEL WELDED BUTT WELD FITTINGS 45
WELDEDBUTT WELD
FITTINGSASTM A403,
304L
NPS/NB CON RED ECC RED RED TEES(in)
SCH SCH SCH SCH SCH SCH10S 40S 10S 40S 10S 40S
3⁄4 x 1⁄2 ✔ ✔ ✔ ✔ ✔ ✔
1 x 1⁄2 ✔ ✔ ✔ ✔ ✔ ✔
1 x 3⁄4 ✔ ✔ ✔ ✔ ✔ ✔
11⁄4 x 1⁄2 ✔ ✔ – – – –11⁄4 x 3⁄4 ✔ ✔ – – – –11⁄4 x 1 ✔ ✔ ✔ ✔ ✔ ✔
11⁄2 x 1⁄2 ✔ ✔ – – ✔ ✔
11⁄2 x 3⁄4 ✔ ✔ – – ✔ ✔
11⁄2 x 1 ✔ ✔ ✔ ✔ ✔ ✔
11⁄2 x 11⁄4 ✔ ✔ ✔ – ✔ ✔
2 x 1⁄2 ✔ ✔ – – ✔ ✔
2 x 3⁄4 ✔ ✔ – – ✔ ✔
2 x 1 ✔ ✔ ✔ ✔ ✔ ✔
2 x 11⁄4 ✔ ✔ ✔ ✔ ✔ ✔
2 x 11⁄2 ✔ ✔ ✔ ✔ ✔ ✔
21⁄2 x 1 ✔ – – – – –21⁄2 x 11⁄4 ✔ – – – – –21⁄2 x 11⁄2 ✔ – – – – –21⁄2 x 2 ✔ – ✔ ✔ ✔ ✔
3 x 1 ✔ ✔ – – ✔ ✔
3 x 11⁄4 ✔ ✔ – – ✔ ✔
3 x 11⁄2 ✔ ✔ ✔ ✔ ✔ –3 x 2 ✔ ✔ ✔ ✔ ✔ ✔
3 x 21⁄2 ✔ ✔ ✔ ✔ ✔ –4 x 11⁄2 ✔ – – – ✔ –4 x 2 ✔ ✔ ✔ ✔ ✔ ✔
4 x 21⁄2 ✔ – ✔ – ✔ ✔
4 x 3 ✔ ✔ ✔ ✔ ✔ ✔
5 x 3 ✔ ✔ – – – –5 x 4 ✔ ✔ – – – –6 x 3 ✔ ✔ ✔ ✔ ✔ ✔
6 x 4 ✔ ✔ ✔ ✔ ✔ ✔
6 x 5 ✔ ✔ ✔ – ✔ ✔
8 x 4 ✔ ✔ – – – –8 x 5 ✔ – – – – –8 x 6 ✔ ✔ ✔ – – –
10 x 6 ✔ ✔ ✔ – – –10 x 8 ✔ – ✔ – – –12 x 8 ✔ ✔ ✔ – – –
12 x 10 ✔ ✔ ✔ – – –
0271 Aalco Stock List 04 20/9/04 11:48 am Page 43
STAINLESS STEEL WELDED BUTT WELD FITTINGS46
WELDEDBUTT WELD
FITTINGSASTM A403,
316L
NPS/NB CON RED ECC RED RED TEES(in)
SCH SCH SCH SCH SCH SCH10S 40S 10S 40S 10S 40S
3⁄4 x 1⁄2 ✔ ✔ ✔ ✔ ✔ ✔
1 x 1⁄2 ✔ ✔ ✔ ✔ ✔ ✔
1 x 3⁄4 ✔ ✔ ✔ ✔ ✔ ✔
11⁄4 x 1⁄2 ✔ ✔ – – – –11⁄4 x 3⁄4 ✔ ✔ – – – –11⁄4 x 1 ✔ ✔ ✔ ✔ ✔ ✔
11⁄2 x 1⁄2 ✔ ✔ – – ✔ ✔
11⁄2 x 3⁄4 ✔ ✔ – – ✔ ✔
11⁄2 x 1 ✔ ✔ ✔ ✔ ✔ ✔
11⁄2 x 11⁄4 ✔ ✔ ✔ – ✔ ✔
2 x 1⁄2 ✔ ✔ – – ✔ ✔
2 x 3⁄4 ✔ ✔ – – ✔ ✔
2 x 1 ✔ ✔ ✔ ✔ ✔ ✔
2 x 11⁄4 ✔ ✔ ✔ ✔ ✔ ✔
2 x 11⁄2 ✔ ✔ ✔ ✔ ✔ ✔
21⁄2 x 1 ✔ – – – – –21⁄2 x 11⁄4 ✔ – – – – –21⁄2 x 11⁄2 ✔ – – – – –21⁄2 x 2 ✔ ✔ ✔ – ✔ ✔
3 x 1 ✔ ✔ – – ✔ ✔
3 x 11⁄4 ✔ – – – ✔ ✔
3 x 11⁄2 ✔ ✔ ✔ ✔ ✔ ✔
3 x 2 ✔ ✔ ✔ ✔ ✔ ✔
3 x 21⁄2 ✔ ✔ ✔ – ✔ –4 x 11⁄2 ✔ – – ✔ ✔ –4 x 2 ✔ ✔ ✔ ✔ ✔ ✔
4 x 21⁄2 ✔ – ✔ – ✔ ✔
4 x 3 ✔ ✔ ✔ ✔ ✔ ✔
5 x 3 ✔ ✔ – – – –5 x 4 ✔ ✔ – – – –6 x 3 ✔ ✔ ✔ ✔ ✔ ✔
6 x 4 ✔ ✔ ✔ ✔ ✔ ✔
6 x 5 ✔ ✔ ✔ – ✔ ✔
8 x 4 ✔ ✔ – – – –8 x 5 ✔ – – – – –8 x 6 ✔ ✔ ✔ – ✔ –
10 x 6 ✔ ✔ – – – –10 x 8 ✔ ✔ – – – –12 x 6 – – – – ✔ –12 x 8 ✔ ✔ ✔ – – –12 x 10 ✔ ✔ ✔ – – –
0271 Aalco Stock List 04 20/9/04 11:48 am Page 44
STAINLESS STEEL FLANGES 47
FLANGESASTM A182,
ANSI B16.5
NPS/NB 150lb 300lb 150lb 300lb(in) RFWN RFWN RFWN RFWN
304L 304L 316L 316L
SCH SCH SCH SCH SCH SCH SCH SCH SCH10S 40S 40S 10S 40S 80 10S 40S 80S
1⁄2 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔3⁄4 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
1 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
11⁄4 – – – – ✔ – – – –11⁄2 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
2 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
21⁄2 ✔ ✔ – ✔ ✔ – – – –3 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
4 ✔ ✔ ✔ ✔ ✔ – ✔ ✔ –6 ✔ ✔ ✔ ✔ ✔ – ✔ ✔ –8 ✔ ✔ ✔ ✔ ✔ – – – –10 ✔ ✔ ✔ ✔ ✔ – – – –12 ✔ ✔ – ✔ ✔ – – – –14 – – – ✔ – – – – –16 – ✔ – ✔ – – – – –18 – – – ✔ – – – – –20 – – – ✔ – – – – –24 – – – ✔ – – – – –
Type 304L Type 316L
0271 Aalco Stock List 04 20/9/04 11:48 am Page 45
48
FLANGESASTM A182,
ANSI B16.5
NPS/NB 150lb RFSO 300lb RFSO 150lb RFB 300lb RFB
(in) 304L 316L 316L 304L 316L 316L
1⁄2 ✔ ✔ ✔ ✔ ✔ ✔3⁄4 ✔ ✔ ✔ ✔ ✔ ✔
1 ✔ ✔ ✔ ✔ ✔ ✔
11⁄4 ✔ ✔ ✔ ✔ ✔ –11⁄2 ✔ ✔ ✔ ✔ ✔ ✔
2 ✔ ✔ ✔ ✔ ✔ ✔
21⁄2 ✔ ✔ – ✔ ✔ –3 ✔ ✔ ✔ ✔ ✔ ✔
4 ✔ ✔ ✔ ✔ ✔ ✔
5 ✔ ✔ – ✔ ✔ –6 ✔ ✔ ✔ ✔ ✔ ✔
8 ✔ ✔ ✔ ✔ ✔ ✔
10 ✔ ✔ ✔ ✔ ✔ ✔
12 ✔ ✔ ✔ ✔ ✔ ✔
14 ✔ ✔ – ✔ ✔ –16 ✔ ✔ – ✔ ✔ –18 ✔ ✔ – ✔ ✔ –20 ✔ ✔ – ✔ ✔ –24 ✔ ✔ – ✔ ✔ –
Type 304L & 316L
0271 Aalco Stock List 04 20/9/04 11:48 am Page 46
STAINLESS STEEL FITTINGS 49
BSP Fittings – Type 316All items are stocked in the size range 1/8” to 3”
FITTINGS
Equal Socket (Coupling
90º Elbows (female)
Half Socket
45º Elbows (female)
Reducing Socket
Reducing Bush
Hexagon Union
Square Head Plug
Barrel Nipples
Hexagon Head Plug
Hexagon Nipples
Caps
Weld Nipples
Hexagon Back-Nut
Hexagon Reducing Nipples
Equal Tee
90º Male Bends
0271 Aalco Stock List 04 20/9/04 11:48 am Page 47
STAINLESS STEEL SEAMLESS TUBE50
SEAMLESS TUBEASTM A269
O/D Wall(mm) (mm)
14 1.514 2.015 1.015 1.515 2.016 1.516 2.018 1.520 1.520 2.022 1.5
O/D Wall(mm) (mm)
25 1.525 2.025 2.525 3.030 1.530 2.030 3.038 3.038 4.0
O/D Wall(mm) (mm)
6 0.56 1.06 1.58 1.08 1.510 1.010 1.510 2.012 1.012 1.512 2.0
O/D Wall(mm) (swg)
5/8 205/8 185/8 163/4 203/4 183/4 167/8 181 18
11/4 182 16
O/D Wall(mm) (mm)
6 1.08 1.010 1.010 2.012 1.015 1.015 1.515 2.018 1.525 1.550 2.0
O/D Wall(mm) (swg)
1/8 253/16 221/4 201/4 181/4 165/16 203/8 203/8 183/8 161/2 181/2 16
Type 304L
Type 316L
0271 Aalco Stock List 04 20/9/04 11:48 am Page 48
STAINLESS STEEL SEAMLESS TUBE 51
SEAMLESS TUBEASTM A269
O/D Wall(in) (swg) (in)
1/8 241/8 221/8 203/16 243/16 223/16 203/16 181/4 221/4 201/4 181/4 165/16 225/16 205/16 185/16 163/8 223/8 203/8 163/8 143/8
1/8
7/16 201/2 221/2 201/2 181/2 161/2 14
O/D Wall(in) (swg) (in)
1/21/8
5/8 205/8 185/8 165/8 145/8
1/8
3/4 203/4 183/4 163/4 143/4 123/4
1/8
3/43/16
7/8 187/8 167/8 147/8
1/8
1 201 181 161 141 121 101 3/16
1 1/4
11/8 16
O/D Wall(in) (swg) (in)
11/4 1811/4 1611/4 1411/4
1/8
13/8 1611/2 1611/2 1411/2
1/4
11/21/8
13/4 1613/4
1/8
2 162 142 1/8
2 1/4
21/4 1621/4 1021/4
1/4
21/2 1621/2
1/8
21/21/4
3 163 143 103 1/4
4 1/4
Type 316L
0271 Aalco Stock List 04 20/9/04 11:48 am Page 49
STAINLESS STEEL HYGIENIC TUBE & FITTINGS52
RJT & DIN Hexagon NutsRJT & DIN Weld LinersRJT & DIN Weld MalesRJT & DIN Joint RingsRJT & DIN Weld UnionsRJT & DIN Blank CapsRJT Hose LinersRJT Blank Nut and ChainIDF Hex Nuts IDF Weld LinersIDF Weld Males IDF Joint RingsIDF Weld Unions
Hygienic Fittings – Type 304L & 316LSizes 1” to 4”
ISO 90º Bends PolishedISO 45º Bends PolishedISO 90º Bends DescaledISO 45º Bends DescaledBends are available in long and shorttype
Equal Tee PolishedEqual Tee DescaledPulled Tee Polished Pulled Tee DescaledPulled Red. Tee PolishedPulled Red. Tee DescaledHinged Piped Clips
HYGIENICFITTINGS TYPE304L AND 316L
HYGIENIC TUBEWelded and annealedPolished, BA and also
descaledType 304L and
Type 316L
HYGIENIC TUBEas welded not
annealed, polished and also descaled
Type 304L and Type 316L
O/D Wall Weight per Mtr (in) (swg) (kg)
3/4” 16 0.701” 16 0.9911/2” 16 1.512” 16 1.8821/2” 16 2.493” 16 3.014” 16 4.034” 14 4.98
O/D Wall Weight per Mtr (in) (mm) (kg)
1” 1.50 0.9011/2” 1.50 1.382” 1.50 1.8521/2” 1.50 2.343” 1.50 2.814” 2.00 5.02
0271 Aalco Stock List 04 20/9/04 11:48 am Page 50
STAINLESS STEEL STRUCTURAL & DECORATIVE TUBE 53
O/D Wall Weight per(in) (mm) (mm) metre (kg)
1⁄2 1.50 0.425⁄8 1.20 0.445⁄8 1.50 0.543⁄4 1.20 0.533⁄4 1.50 0.667⁄8 1.20 0.637⁄8 1.50 0.787⁄8 2.00 1.011 1.20 0.731 1.50 0.901 2.00 1.17
11⁄8 1.50 1.0211⁄4 1.20 0.92
O/D Wall Weight per(in) (mm) (mm) metre (kg)
11⁄4 1.50 1.1313⁄8 1.20 1.0211⁄2 1.20 1.1111⁄2 1.50 1.3811⁄2 2.00 1.8113⁄4 1.50 1.622 1.20 1.492 1.50 1.852 2.00 2.40
21⁄2 1.50 2.343 1.50 2.814 3.00 7.41
ROUND 304
Welded Mirror Polished
O/D Wall Weight per(in) (mm) metre (kg)
1⁄2 1.50 0.425⁄8 1.20 0.445⁄8 1.50 0.543⁄4 1.20 0.533⁄4 1.50 0.667⁄8 1.20 0.637⁄8 2.00 1.011 1.20 0.731 1.50 0.901 2.00 1.1711⁄4 1.50 1.1311⁄2 1.50 1.38
O/D Wall Weight per(in) (mm) metre (kg)
11⁄2 3.00 2.6450 2.50 2.9950 3.00 3.552 1.20 1.492 1.50 1.852 2.00 2.402 3.00 7.4321⁄2 1.50 2.343 1.50 2.813 3.00 5.524 3.00 7.42
ROUND 316
Welded Mirror Polished
ROUND 316
Welded Dull Polished
O/D Wall Weight per(in) (mm) metre (kg)
11⁄2 3.00 2.762 3.00 7.433 3.00 5.524 3.00 7.42
0271 Aalco Stock List 04 20/9/04 11:48 am Page 51
STAINLESS STEEL STRUCTURAL & DECORATIVE TUBE54
SQUARE 304
Welded Dull Polished
Dimensions Wall Weight per(mm) (mm) metre (kg)
12.7 x 12.7 1.20 0.4412.7 x 12.7 1.50 0.5515 x 15 1.20 0.5315 x 15 1.50 0.6520 x 20 1.20 0.7120 x 20 1.50 0.8820 x 20 2.00 1.1925 x 25 1.20 0.9225 x 25 1.50 1.1425 x 25 2.00 1.4925 x 25 3.00 2.2030 x 30 1.20 1.1030 x 30 1.50 1.3730 x 30 2.00 1.8430 x 30 3.00 2.72
Dimensions Wall Weight per(mm) (mm) metre (kg)
40 x 40 1.20 1.4940 x 40 1.50 1.8540 x 40 2.00 2.4540 x 40 3.00 3.7550 x 50 1.50 2.3250 x 50 2.00 3.0850 x 50 3.00 4.6560 x 60 2.00 3.7160 x 60 3.00 5.4970 x 70 3.00 6.5380 x 80 2.00 4.9880 x 80 3.00 7.53100 x 100 2.00 6.40100 x 100 3.00 9.53
TYPE 304 AND 316
Handrail Section,welded, unannealed,
dull polished.
O/D Wall Weight per(mm) (mm) metre (kg)
42.40 x 2.5 2.4948.30 x 2.5 2.8660.30 x 2.5 3.61
Dimensions Wall Weight per(mm) (mm) metre (kg)
12.7 x 12.7 1.20 0.4412.7 x 12.7 1.50 0.5540 x 40 4.00 4.8050 x 50 4.00 5.9650 x 50 5.00 7.4160 x 60 4.00 7.2260 x 60 5.00 8.9080 x 80 4.00 9.8280 x 80 5.00 12.39100 x 100 4.00 12.40100 x 100 5.00 15.38100 x 100 6.00 17.50100 x 100 8.00 21.60
Dimensions Wall Weight per(mm) (mm) metre (kg)
120 x 120 5.00 18.66120 x 120 6.00 21.20150 x 150 4.00 18.60150 x 150 5.00 23.00150 x 150 6.00 31.20150 x 150 8.00 34.30150 x 150 10.00 41.65200 x 200 5.00 30.80200 x 200 6.00 36.90200 x 200 8.00 47.25200 x 200 10.00 57.60250 x 250 8.00 59.90250 x 250 10.00 73.50
SQUARE 304
Welded Unpolished
O/D Wall Weight per(in) (mm) metre (kg)
11⁄2 3.00 2.622 3.00 3.573 3.00 5.474 3.00 7.38
0271 Aalco Stock List 04 20/9/04 11:48 am Page 52
STAINLESS STEEL STRUCTURAL & DECORATIVE TUBE 55
RECTANGULAR304
Welded Unpolished
Dimensions Wall Weight per(mm) (mm) metre (kg)
80 x 40 4.00 7.2280 x 40 5.00 8.90100 x 50 4.00 9.09100 x 50 5.00 11.30120 x 60 3.00 8.39120 x 60 4.00 11.10120 x 60 5.00 13.75120 x 80 3.00 9.54120 x 80 4.00 12.40120 x 80 5.00 15.38150 x 50 3.00 9.53150 x 50 5.00 15.38150 x 80 3.00 10.70150 x 100 3.00 11.70
Dimensions Wall Weight per(mm) (mm) metre (kg)
150 x 100 4.00 15.40150 x 100 5.00 18.80150 x 100 6.00 22.60150 x 100 8.00 27.90200 x 100 4.00 18.60200 x 100 5.00 22.60200 x 100 6.00 27.40200 x 100 8.00 34.30200 x 100 10.00 41.65200 x 150 6.00 36.90200 x 150 8.00 41.34300 x 100 8.00 47.25250 x 150 6.00 36.90250 x 150 8.00 47.25
RECTANGULAR304
Welded Dull Polished
Dimensions Wall Weight per(mm) (mm) metre (kg)
20 x 10 1.50 0.4430 x 10 1.20 0.7130 x 10 1.50 0.9030 x 15 1.50 0.7630 x 20 1.50 1.1440 x 15 1.50 1.2540 x 20 1.20 1.1040 x 20 1.50 1.3740 x 20 2.00 1.8450 x 25 1.20 1.4150 x 25 1.50 1.7550 x 25 2.00 2.3150 x 25 3.00 3.7550 x 30 1.50 1.8550 x 30 3.00 3.6160 x 20 1.50 1.8560 x 20 2.00 2.4560 x 30 2.00 2.8060 x 30 3.00 4.1360 x 40 1.50 2.32
Dimensions Wall Weight per(mm) (mm) metre (kg)
60 x 40 2.00 3.0860 x 40 3.00 4.6580 x 40 1.50 2.8080 x 40 2.00 3.7180 x 40 3.00 5.4980 x 40 4.00 7.2280 x 40 5.00 8.9480 x 60 3.00 6.53100 x 40 1.50 3.29100 x 40 3.00 6.53100 x 50 2.00 4.68100 x 50 3.00 6.95100 x 50 4.00 9.09100 x 50 5.00 11.30100 x 60 3.00 7.53120 x 60 3.00 8.12120 x 80 3.00 9.53150 x 100 3.00 11.70150 x 100 5.00 18.80
0271 Aalco Stock List 04 20/9/04 11:48 am Page 53
STAINLESS STEEL STRUCTURAL & DECORATIVE TUBE56
SQUARE 316
Welded Dull Polished
Dimensions Wall Weight per(mm) (mm) metre (kg)
20 x 20 1.50 0.8820 x 20 2.00 1.1925 x 25 1.20 0.9225 x 25 1.50 1.1430 x 30 2.00 1.8430 x 30 3.00 2.7240 x 40 1.50 1.8540 x 40 2.00 2.45
Dimensions Wall Weight per(mm) (mm) metre (kg)
40 x 40 3.00 3.7550 x 50 2.00 3.0850 x 50 3.00 4.6560 x 60 3.00 5.4980 x 80 2.00 4.9880 x 80 3.00 7.53100 x 100 3.00 9.53100 x 100 5.00 15.30
Dimensions Wall Weight per(mm) (mm) metre (kg)
150 x 100 8.00 27.90160 x 80 3.00 11.10200 x 100 4.00 18.60200 x 100 5.00 22.40200 x 100 8.00 34.30200 x 100 10.00 41.65250 x 150 8.00 47.25300 x 100 8.00 47.25
Dimensions Wall Weight per(mm) (mm) metre (kg)
80 x 40 4.00 7.2280 x 40 5.00 8.90100 x 50 5.00 11.24120 x 80 3.00 9.53120 x 80 5.00 15.38150 x 100 3.00 11.66150 x 100 4.00 15.40150 x 100 5.00 18.80150 x 100 6.00 22.60
RECTANGULAR316
Welded Unpolished
Dimensions Wall Weight per(mm) (mm) metre (kg)
40 x 20 2.00 1.8450 x 25 1.50 1.7560 x 40 2.00 3.0880 x 40 2.00 4.98
Dimensions Wall Weight per(mm) (mm) metre (kg)
80 x 40 3.00 5.49120 x 80 3.00 9.53120 x 80 4.00 12.40RECTANGULAR
316 Welded Dull Polished
0271 Aalco Stock List 04 20/9/04 11:48 am Page 54
STAINLESS STEEL STRUCTURAL & DECORATIVE TUBE 57
Dimensions Wall Weight per(mm) (mm) metre (kg)
40 x 20 1.50 1.37
Dimensions Wall Weight per(mm) (mm) metre (kg)
25 x 25 1.20 0.9225 x 25 1.50 1.1430 x 30 1.20 1.1030 x 30 1.50 1.37
Dimensions Wall Weight per(mm) (mm) metre (kg)
32 x 32 1.20 1.2032 x 32 1.50 1.4740 x 40 1.50 1.85
SQUARE 430Welded Dull Polished
RECTANGULAR430
Welded Dull Polished
Dimensions Wall Weight per(mm) (mm) metre (kg)
30 x 30 3.00 2.7240 x 40 3.00 3.7550 x 50 3.00 4.6550 x 50 4.00 5.9660 x 60 3.00 5.4980 x 80 3.00 7.5380 x 80 4.00 9.82100 x 100 3.00 9.53100 x 100 4.00 12.40100 x 100 5.00 15.38100 x 100 6.00 17.50100 x 100 8.00 21.60
Dimensions Wall Weight per(mm) (mm) metre (kg)
120 x 120 4.00 15.03120 x 120 5.00 18.66120 x 120 6.00 21.20150 x 150 4.00 18.64150 x 150 5.00 23.00150 x 150 6.00 27.36200 x 200 5.00 30.80200 x 200 6.00 36.90200 x 200 8.00 47.25200 x 200 10.00 57.60250 x 250 10.00 73.50
SQUARE 316 Welded Unpolished
0271 Aalco Stock List 04 20/9/04 11:48 am Page 55
STAINLESS STEEL METRIC TUBE & FITTINGS58
Weight per metre (kg) for given Wall Thickness in mmDN OD 1.5mm 2.0mm15 18 0.62015 20 0.695 0.90120 23 0.80820 25 0.88325 28 0.99525 30 1.070 1.40225 32 1.14632 35 1.25832 38 1.371 1.80332 40 1.90340 43 1.55940 44.5 2.12850 51 1.859 2.45450 53 1.93450 54 2.60465 68 2.49865 69 3.35565 70 3.40575 78 2.87080 83 3.06180 84 4.107
100 103 3.812100 104 5.108125 128 4.751125 129 6.360150 153 5.690150 154 7.612200 203 7.568200 204 10.116250 254 12.620300 304 15.214
Grades: EN 1.4432 (316L High Molybdenum) ● EN 1.4307 (304L) ● EN 1.4571 (316 Titanium/316Ti)
The Stock Range Includes● Tube from 8mm to 900mm in wall
thicknesses from 1mm to 5mm withlarger/heavier sizes available on fast-trackproduction.
● 45º & 90º Elbows – Radius D+100 ● 45º & 90º Elbows – Radius 1.5D ● 90º Elbows – Radius 3D ● Pressed Equal Tees● Fabricated Equal Tees● Pulled Equal Tees● Pulled Reducing Tees● Concentric Reducers
● Eccentric Reducers● Pressed Collars● Pressed Collars – DWSR● Pressed Collars – NPR● Angle Collars● Pressed End Caps● Stainless Steel Tube Clamps● Mild Steel Tube Clips● Mild Steel Backing Flanges – Six Types● Epoxy Coated Aluminium Backing Flanges● Pressed Stainless Steel Backing Flanges &
Blind Flanges
METRIC WELDED TUBE
0271 Aalco Stock List 04 20/9/04 11:48 am Page 56
STAINLESS STEEL METRIC TUBE & FITTINGS 59
WEIGHTS
All weights shown in this publication are for
guidance only. They are calculated using nominal
dimensions and scientifically recognised densities.
Please note that in practice, the actual weight
can vary significantly from the theoretical weight
due to variations in manufacturing tolerances
and compositions.
The information contained herein is based on our
present knowledge and experience and is given in
good faith. However, no liability will be accepted by
the Company in respect of any action taken by any
third party in reliance thereon.
As the products detailed herein may be used for
a wide variety of purposes and as the Company
has no control over their use, the Company
specifically excludes all conditions or warranties
expressed or implied by statute or otherwise as to
dimensions, properties and/or their fitness for any
particular purpose. Any advice given by the
Company to any third party is given for that party’s
assistance only and without any liability on the part
of the Company.
Any contract between the Company and a customer
will be subject to the Company’s Conditions of Sale.
The extent of the Company’s liabilities to any
customer is clearly set out in those Conditions; a
copy of which is available on request.
October 2004 – Issue 5
Stainless Steel Tubular Products DataDisc
Road Transport Bodybuilding Manual
Stainless SteelStructural Tube
Square & Rectangular
Stainless SteelStructural Tube
Square & Rectangular
StainlessSteel
Wire Mesh
StainlessSteel
Wire Mesh
Structural Tube Brochure
Complete Product Catalogue
Aerospace Brochure Road Transport Brochure
Treadplate Brochure
Metric Tube & Fittings Brochure
Wire Mesh Leaflet
StandardStock Range
The following illustrate arange of product informationavailable from Aalco – For details of your local branchplease refer to back cover.
THE SERVICE PROVIDER
Treadplatein Aluminium & Stainless Steel
Technical Publication
No. 001
ISSUE 1. 05.01.04
Metric Tru-Bore®* Stainless Steel Tube & Fittings
Technical Publication
No. 001
ISSUE 1. 05.01.04
Road Transport Bodybuilding Manual
Weight per metre (kg) for given Wall Thickness in mmDN OD 2.5mm 3.0mm 4.0mm 5.0mm100 106 7.737100 108 10.417150 156 11.493150 158 15.425200 205 12.677200 206 15.249200 208 20.433250 255 15.807250 256 19.005300 305 18.937300 306 22.761300 308 30.449350 355 22.067350 356 26.517400 406 30.273400 408 40.465450 456 34.029500 506 37.785500 508 50.481600 606 45.297600 608 60.497700 708 70.508800 808 80.524900 910 113.00
Dimensional Tolerances to SS/EN/ISO 1127Outside Diameter (Designation D3): + or – 0.75% / minimum + or – 0.3mm Outside Diameter for tubes 203mm O/D & above (Designation T2): + or – 1.0% / minimum + or – 0.5mm Wall Thickness (Designation T3): + or – 10% / minimum + or – 0.15mm
Lengths6 meter random lengths with plain ends
Finish12mm to 18mm: Bright Annealed or Annealed & Pickled (Supplier Option) 20mm to 70mm: Annealed & Pickled 78mm and over: Not Heat Treated, Pickled
NoteTube above DN600 may be supplied with two or more longitudinal welds
Grades: EN 1.4432 (316L High Molybdenum) ● EN 1.4307 (304L) ● EN 1.4571 (316 Titanium/316Ti)
METRIC WELDED TUBE
0271 Aalco Stock list Cover 04 13/9/04 1:47 pm Page 1
ABERDEEN41 Castle TerraceAberdeen AB11 5EA Tel: 01224 596611Fax: 01224 596622e-mail: [email protected]
BELFASTThe Belfast Metal CentreMcKinney Industrial Estate54 Mallusk RoadNewtownabbey BT36 4PX Tel: 02890 838 838Fax: 02890 837 837e-mail: [email protected]
BIRMINGHAMShelah RoadHalesowenWest Midlands B63 3PH Tel: 0121 585 3600Fax: 0121 585 6864e-mail:[email protected]
CHEPSTOWAvenue WestNewhouse Park EstateChepstowMonmouthshire NP16 6UD Tel: 01291 638 638Fax: 01291 638 600e-mail: [email protected]
DYFEDUnits 3-4Capel Hendre Industrial EstateAmmanfordCarmarthenshire SA18 3SJ Tel: 01269 842044 Fax: 01269 845276e-mail: [email protected]
GLASGOW117 Clydesmill PlaceCambuslang Investment ParkGlasgow G32 8RF Tel: 0141 646 3200 Fax: 0141 646 3260e-mail: [email protected]
HULLSaxon WayPriory Park WestHessleHull HU13 9PBTel: 01482 626262 Fax: 01482 626263e-mail: [email protected] 1, Revie Road off Elland RoadLeeds LS11 8JGTel: 0113 276 3300 Fax: 0113 276 0382e-mail: [email protected]
LIVERPOOL207 Great Howard StreetLiverpool L5 9ZHTel: 0151 207 3551Fax: 0151 207 2657e-mail: [email protected]
MANCHESTERExpress Trading EstateStone Hill RoadFarnworthBolton BL4 9NNTel: 01204 863456Fax: 01204 863430e-mail: [email protected]
NEWCASTLEFirst AvenueTeam Valley Trading EstateGatesheadTyne & Wear NE11 0NU Tel: 0191 491 1133Fax: 0191 491 1177e-mail: [email protected]
NORWICHRoundtree WayMousehold LaneNorwich NR7 8SRTel: 01603 787878Fax: 01603 789999e-mail: [email protected]
NOTTINGHAMHarrimans LaneDunkirkNottingham NG7 2SDTel: 0115 988 2600Fax: 0115 988 2636e-mail:[email protected]
SLOUGHUnit 2, 552 Fairlie RoadSlough Trading EstateSloughBerkshire SL1 4PYTel: 01753 619900Fax: 01753 512227e-mail: [email protected]
SOUTHAMPTONTest LaneNurslingSouthampton SO16 9TATel: 02380 875200Fax: 02380 875275e-mail:[email protected]
STOKEUnit F, Forge WayBrown Lees Industrial EstateBiddulphStoke-on-Trent ST8 7DNTel: 01782 375700Fax: 01782 375701e-mail: [email protected]
SWANLEYUnits 6 & 7Pedham Place Industrial EstateWested LaneSwanleyKent BR8 8TETel: 01322 610900Fax: 01322 610910e-mail: [email protected]
BRANCHES
Stainless Steel
Aluminium
Copper, Brass & Bronze
Nickel Alloys
Standard Stock Range
www.aalco.co.uk
0271 Aalco Stock list Cover 04 13/9/04 1:47 pm Page 3