olympic power tower final - amazon s3 · the confidence olympic power tower is essential. please...
TRANSCRIPT
Safety Information
Before undertaking any exercise program that will increase cardiovascular activity please be sure to
consult your doctor. Frequent strenuous exercise should be approved by your doctor and proper use of
the Confidence Olympic Power Tower is essential. Please read the manual carefully before commencing
assembly and starting exercise.
• Please keep children away from the Confidence Olympic Power Tower at all times.
• Please ensure that there is at least 1 meter of free space around the Confidence Olympic Power
Tower.
• Regularly check to see that all nuts, bolts and fittings are securely fastened.
• Before each use, check that there is no wear and tear or damage to any of the moving parts.
• Clean only with a damp cloth and do not use solvent cleaners.
• Before use always ensure that the Confidence Olympic Power Tower is positioned on a solid flat
surface. If necessary, use a rubber mat underneath to reduce the possibility of slipping.
• Always wear appropriate clothing and footwear such as training shoes when exercising. Do not
wear loose clothing that could become caught or trapped.
• Ensure sure long hair is tied back properly
Storage and Use
The Confidence Olympic Power Tower is intended for use in clean and dry conditions. You should avoid
storage in excessively cold or damp places as this may lead to corrosion and other related problems.
Weight Limit
• 100kgs
Exploded View
(1)MAIN BASE(2)BOTTOMUPRIGHT FRAME
(3)UPPERUPRIGHT FRAME
(4)SUPPORTBAR
(5)CENTERCROSS SUPPORT
(6)BACKRESTSUPPORT TUBE (7)DIP HANDLE ARM (8)LAT BAR
(9)STEEL PLATE(50MM)
(10)STEEL PLATE(LONG) (11)BACKREST (12)ARM REST (13)HAND GRIP
(14)LAT BAR FOAMPAD (LONG)
(15)STEEL PLATE(38MM)
(16)FOAM PAD(SHORT) (17)SQUARE CAP (18)25MM ROUND
CAP
(19)SKIDPROOF (29)BUSHING (30)RUBBER ENDCAP
(31)HANDLE PIPE
(25)M10 LOCK NUT
(24)M8X16 BOLT
(26)M10 WASHER
(27)M8 WASHER
(23)M8X55 BOLT
(21)M10X65 BOLT
(22)M10X55 BOLT
(20)M10X75 BOLT
(28)M10 ARC WASHER
(32)M10X60 BOLT
(33)M10X25 BOLT
Assembly Instructions
Step 1
Step 2
1. PLACE RUBBER END CAP (30) ONTO BOTH ENDS OF MAIN BASE (01).
2. CONNECT CENTER CROSS SUPPORT (05) TO CATCH MAIN BASE (01) BY
USING BOLTS (20) STEEL PLATE (09) AND NUTS (25) WASHERS (26).
3. SLIDE FOAM PAD (16) AND 25MM ROUND CAP (18) ONTO MAIN BASE (01) AS
SHOWN.
1. CONNECT BOTTOM UPRIGHT FRAME (02) ONTO MAIN BASE (01) BY USING
BOLTS (20) WASHERS (26) NUTS (25) AS SHOWN.
2. CONNECT CENTER CROSS SUPPORT (05) TO CATCH BOTTOM UPRIGHT
FRAME (02) BY USING BOLTS (20) STEEL PLATE (09) AND WASHERS (26)
NUTS (25) AS SHOWN.
Step 3
1. CONNECT UPPER UPRIGHT FRAME (03) INTO BOTTOM UPRIGHT FRAME (02)
2. SLIDE FOAM PAD (14,16) ONTO LAT BAR (08) AS SHOWN.
3. CONNECT LAT BAR (08) INTO THE UPPER UPRIGHT FRAME (03) BY USING
BOLTS (22) AND ARC WASHERS (28) AS SHOWN.
Step 4
1. CONNECT DIP HANDLE ARM (07) TO THE UPPER UPRIGHT FRAME (03) BY
USING BOLTS (20) STEEL PLATE (10) AND WASHERS (26) NUTS (25).
2. CONNECT BACKREST SUPPORT TUBE (06) ONTO DIP HANDLE ARM (07) BY
USING BOLTS (32) STEEL PLATE (15) AND WASHERS (26) NUTS (25).
3. INSERT HANDLE PIPE (31) INTO DIP HANDLE ARM (07) USING BOLTS (33) AND
WASHERS (26) AS SHOWN.
4. SLIDE HAND GRIP (13) ONTO DIP HANDLE ARM (07) AND HANDLE PIPE (31).
Step 5
1. ATTACH BACKREST (11) ONTO BACKREST SUPPORT TUBE (06) BY USING
BOLTS (24) WASHERS (27).
2. ATTACH ARM REST (12) ONTO DIP HANDLE ARM (07) BY USING BOLTS (23)
WASHERS (27) AS SHOWN.
UK & Europe www.shop247.co.uk
Units 3 & 4 Lower Park Farm
Storrage Lane
Alvechurch, Worcestershire B48 7ER
United Kingdom
Telephone: 01527 598388
USA www.shop247.com
East Coast
6965-K Northpark Blvd
Charlotte
NC 28216
Telephone 800 603 0004
West Coast
16 Sunset Way
Henderson
NV 89014
Telephone 800 603 0004
AUSTRALIA www.shop247.com.au
Unit 7, 350 Edgar Street
Condell Park NSW, 2200
Australia,
Phone: 1300 795 828