on-line auction date: thursday 11th june 2020...at: malt house, malt cottages, nottingham,...
TRANSCRIPT
ON-LINE AUCTION DATE: THURSDAY 11th JUNE 2020
VIEWING: TUESDAY 9th JUNE 2020 - by appointment only(other dates may be available by prior appointment only)
AT: Malt House, Malt Cottages, Nottingham, Nottinghamshire, NG7 7DX, England.
P P
www.ppaucti
ons.com
Peaker Pattinson (Auctioneers) LtdThe Grange Offices, Aunby, Stamford, Lincs, PE9 4EE EnglandTel: +44 (0)1778 590111 Fax: +44 (0)1778 590730 Email: [email protected]
AUCTION CATALOGUEBy order of:
Gee Engineering Ltddue to the retirement of the owner of the business
PURCHASERS NOTES
Gee Engineering Ltd - On-Line Auction Sale
Bidding Closes From: 11.00am on Thursday 11th June 2020
VIEWINGSite Access:
Please bring an acceptable form of photographic identification (UK Passport or UK Photographic Driving Licence),
(No children under 16 years or animals will be allowed onto the sites)Viewing: Tuesday 9th June 2020 - BY APPOINTMENT ONLY (latest covid-19 guidelines to be observed)
At: Malt House, Malt Cottages, Nottingham, Nottinghamshire, NG7 7DX, England.
ON-LINE BIDDING1) Purchasers wishing to bid for any lot must first register on-line (www.ppauctions.com) and agree to
abide by both the specific sale conditions (purchaser's terms) and the general terms & conditions.
2) All quantities, dimensions, descriptions & photographs given in the catalogue, placed on the bidding pages or
quoted by the Auctioneer are approximate and for guidance only, and no warranties are given or implied.
3) Any bid (acceptable to the auctioneer) forms a legally binding contract and the purchaser is responsible
for the lot or lots once confirmed by invoice from the Auctioneer. Lots marked '(Delayed Collection)'
may be used by the vendor until the release date. N.B. Lots are not transferable.
4) VAT is payable at the current rate on all lots and on the Buyers Premium.
5) Buyers Premium of 15.5% plus VAT is payable on the bid price.
6) Timing: Lots will close between 30 sec & 1 min intervals starting from 11.00am on Thursday 11th June 2020.
Any bids received on a lot within the last two minutes will extend the closing time by two minutes for that lot.
OTHER BIDDING METHODSPurchaser's unable to bid on-line may bid by the following methods:-A. Proxy Bids - all bids must be submitted to the Auctioneers on our bid form (available on request / viewing day).
B. Telephone Bids - available by prior arrangement with the Auctioneers only (minimum £2,000.00)
N.B. Bidding by any of the above methods forms a legally binding contract whether or not the lots have
been viewed and regardless of any descriptive errors. Buyers Premium is still payable.
PAYMENT1) Payment must be made in full within 3 Days upon receipt of invoice. A 20% deposit is required on delayed items.
Invoices will be emailed within 3 working days of the final lot closing. Payment can be made by the following:-
a] BACS / CHAPS Payment (preferred method) b] On-Line Personal UK debit cards Only: £500 Limit
Title of the goods remains with the vendors until cleared funds have been received.
REMOVALN.B. GOODS MAY ONLY BE COLLECTED AFTER CLEARED FUNDS HAVE BEEN RECEIVED
AND ON PRODUCTION OF: THE ORIGINAL COLLECTION NOTE.
Clearance (latest covid-19 guidelines to be observed):
All 'Non Delayed' lots must be removed by FRIDAY 26th JUNE 2020 (12.00noon). Due to
the nature of the site, lots must be removed by prior appointment only (at least 24 hours notice - Tel: 01778 590111).
Dates for clearance are Weekdays only (Excluding Bank Holidays).
Times for clearance are 9.30am to 4.30pm Monday to Thursday & 9.30am to 12.00Noon Friday.
Where relevant risk assessments, method statements, removal plans, timing details, etc. must be supplied to the
Auctioneers for their approval prior to any work commencing on site.Where removal of equipment involves structural work "making good" will be the purchasers responsibility (BTMG).
Please Note: Certain machines may have to be removed by approved contractors only.
Loading:
All Lots are deemed to be purchased 'where they are situated' and in 'the condition as viewed'. All Preparation/
Dismantling/Slinging/Lifting/Transportation etc. of the equipment is the exclusive responsibility of the purchaser.
No containers can be loaded on site without 5 working days notice & prior written approval from the Auctioneers.
Personnel / Equipment:
All personnel intending to operate lifting / moving equipment on site must first produce to the Peaker Pattinsonsupervisor - current UK operating licenses - current UK equipment certificates and proof of all relevant UK
insurances. They will be expected to work to The Vendors, Peaker Pattinson (Auctioneers) Ltd and current Health &safety regulations and may be ordered off the site at any time for breach of these regulations.
Peaker Pattinson (Auctioneers) LimitedPeaker Pattinson (Auctioneers) LimitedPeaker Pattinson (Auctioneers) LimitedPeaker Pattinson (Auctioneers) LimitedTEL: +44 (0)1778 590111 FAX: +44 (0)1778 590730 E-mail: [email protected]
PP Peaker Pattinson (Auctioneers) Ltd TERMS & CONDITIONS 1. Every Sale and these conditions of sale shall be governed by and construed in accordance with English Law and shall be subject to the jurisdiction of English Courts.
2. The Company acts as Principles in respect of goods offered for sale and herein shall be known as the ‘Auctioneers’. Persons instructing the Company to sell goods are herein known as the ‘Clients’. Persons who have acquired lots offered for sale by the Auctioneers are herein known as the ‘Purchasers’.
3. All persons attending a Sale under the conduct of the Auctioneers - whether on viewing day, sale day, or to remove equipment at the sale rooms or any other site - shall be deemed to be on the land and premises at their own risk and shall have no claim against the Auctioneers or their principals in respect of the cancellation / postponement of a Sale or any loss, accident or injury, however occasioned, save in so far as the same is proven to be caused by the direct negligence of an employee(s) of the Company.
4. The Auctioneers make every reasonable effort to ensure the accuracy of the Advertisements, catalogue / on-line descriptions, photographs and other publicity but except where specifically instructed so to certify by a Client, declare that all statements, oral or in writing, are those of opinion only, made without responsibility and shall not give rise to any action in law for damages, compensation or rescission of sale by a Purchaser, against any Client, the Auctioneers or their employees.
5. Many lots are of an age or nature, which preclude their being in pristine condition. Some catalogue / on-line descriptions may make reference to damage and / or restoration; however, omission of such a reference does not imply a lot is free from defects nor does any reference to a particular defect imply the absence of others.
6. Purchasers should therefore satisfy themselves by physical inspection of lots, before bidding, as to the origin, authenticity, quality, quantity, age, weight, size and general description - as lots are sold in their actual state with all faults, imperfections or errors of description & photographs. Any discrepancy over lots must be notified to the Auctioneers prior to removal.
7. Electrical / Mechanical goods are sold on the strict understanding that these are untested, without warranties or any guarantees as to serviceability or working order.
8. Persons handling lots do so at their own risk and shall make good all loss and damage howsoever sustained; such estimate of cost to be assessed by the Auctioneers whose decision shall be final.
9. In making a bid, Purchasers acknowledge their attention has been drawn to these Conditions of Sale and that they are satisfied as to the description, photographs and condition of lots.
10. Lots are sold subject to any announcement, declaration, alternation of description or other matters, made by the Auctioneers prior to the closure of the lots.
11. At the fall of the hammer, due Tender Date or on-line lot closing, the highest bidder, acceptable to the Auctioneers, shall be deemed to be the Purchaser. In all cases including on-line technical problems, any dispute shall be settled by the Auctioneers, whose decision shall be absolute and final. No lots shall be transferred.
12. The Auctioneers my divide, combine, add to or withdraw lots and make any catalogue alterations without notice or reason; they shall regulate bidding, accept or reject any bid (at their absolute discretion and without justification) and bid on behalf of the Client, where there is a reserve price or at their authorised discretion.
13. The Auctioneers shall not be responsible for default on the part of Clients or Purchasers. Any resultant deficiency, together with interest, costs and expenses, shall be made good by the defaulter, recoverable as and for liquidation damages. This condition is, however without prejudice to the right of the Auctioneers, in appropriate circumstances to enforce the Sale Contract if they think fit.
14. The Contract of Sale is made with the Auctioneers as Principal Agents for the Client and payment shall only be made to them. Notwithstanding the foregoing, the Auctioneers shall retain a lien on all goods, which shall not pass to the Purchaser until full payment has been received.
15. Payment must be made in full to the Auctioneers within 3 days upon receipt of invoice by bank transfer, cheque / bankers draft, credit / debit card, cash etc. and goods will not be released / title of the goods will remain with the vendors until cleared funds have been received.
16. At the fall of the hammer or on acceptance of the Tender, Private Treaty or on-line auction, all lots shall be and remain, in every respect, at the absolute risk of the Purchaser, including those of fire, burglary, etc. and damage occasioned to lots by the removal of other goods.
17. Lots marked ‘(Delayed Collection)’ may be used by the Client until the agreed release date. No responsibility will be taken for ‘wear & tear’ however breakages will be made good by the Client.
18. Purchasers shall pay for and remove lots at their own risk and expense within the specified period following the sale; after such time the Auctioneers reserve the right to scrap, or to resell uncollected lots with no refund being made to the purchaser. In addition they shall be subject to a daily charge per lot to cover storage, loading, transport, etc. and where applicable, interest on outstanding accounts will be levied at 4% above Barclays Bank Minimum Lending Rate. In all cases, the Auctioneers may act without notice and any incidental expenses incurred (including building clearance, penalty clauses etc.) will become a liability to the defaulter.
19. All bidders must be over the age of 18 years old and must have the express authority of the company or body to bid on their behalf. The Auctioneers reserve the right to refuse the highest bidder confirmation of purchase of any lot without reason or justification.
20. The Auctioneers reserve the right to cancel, postpone or re-run an on-line auction / tender in whole or part without reason or justification.
21. HEALTH AND SAFETY AT WORK ACT 1974 [Section 6(8)] Purchasers must take all necessary steps to ensure that equipment purchased is safe and without risks to health when it is re-installed, re-used, cleaned or maintained by a person at work. By accepting these terms and conditions the Purchaser agrees to relieve the Auctioneer and their Clients of any liabilities under section 6(1)(a) or 6(1A) of the Act, and accept that failure to facilitate all necessary safety requirements before taking the equipment into service may render the Purchaser liable to prosecution and / or a fine of up to £20,000 on summary conviction. (Note: It is a UK legal requirement that before work equipment can be taken into use it must comply with the Provision and Use of Work Equipment Regulations 1998 and any other relevant legislation).
LOT DESCRIPTION
Thursday 11th June 2020 - starting 11.00am
Equipment Located at: Gee Engineering Ltd, Nottingham, Nottinghamshire
1 Qty HSS reamers to 30mm approx
2 Qty HSS reamers to 50mm approx
3 Qty HSS straight / taper shank twist drills to 1 5/64" approx
4 Qty HSS straight / taper shank twist drills to 1 7/8" approx
5 Qty HSS straight / taper shank twist drills to 49/64" approx
6 Qty HSS straight / taper shank twist drills to 20mm approx
7 Qty HSS straight / taper shank twist drills to 1 1/4" approx
8 Qty HSS straight / taper shank twist drills to 40mm approx
9 Qty HSS taper shank twist drills to 1 9/16" approx
10 Qty HSS taper shank twist drills to 1 19/32" approx
11 Qty HSS taper shank twist drills to 2 5/8" approx
12 Qty HSS taper shank twist drills to 1 1/4" approx
13 Qty HSS taper shank twist drills to 1 3/4" approx
14 Qty HSS taper shank twist drills to 1" approx
15 Qty HSS taper shank twist drills to 1" approx
16 Qty various taper boring bars
17 Qty various taper boring bars
18 Qty various Bilz, Nikken etc quick change tool holders
19 Qty various tip turning / boring tools
20 Qty various HSS woodruff cutters to 2" approx
21 Qty various HSS end mills / slot drills to 40mm approx
22 Qty various HSS end mills / slot drills to 2" approx
23 Qty various HSS end mills / slot drills to 40mm approx
24 Qty various HSS end mills / slot drills to 50mm approx
25 Qty HSS reamers to 1 1/2" approx
26 Qty HSS reamers to 5/16" approx
27 Qty HSS reamers to 1 13/16" approx
28
29
30 Qty various HSS taps to 1 1/4" approx
31 Qty various HSS taps to 1 1/4" approx
32 Qty various HSS taps to 2" approx
33 Qty various HSS taps to 2 1/2" approx
34 Qty various HSS taps to 1 1/8" approx
35 Qty various HSS taps to 2" approx
36 Qty various HSS taps to 1 1/2" approx
37 Qty various HSS taps to 50mm approx
38 Qty various HSS taps to 2" approx
39 Qty various HSS taps to 2" approx
LOT DESCRIPTION
40 Qty various letter / number stamps
41 Qty various size SKF, Nachi etc metal bearings (mainly boxed & unused)
42 Qty various HSS end mills / slot drills to 50mm approx
43 Qty HSS reamers to 1" approx
44 Qty HSS reamers to 1 1/2" approx
45 Qty HSS reamers to 45mm approx
46 Qty various size expanding reamers
47 Qty HSS taper shank twist drills to 35mm approx
48 Korloy K3D657050-13 tip king drill (boxed & unused)
49 Qty various HSS turning / tip turning tools
50 Qty various HSS taps to 1" approx
51 Qty various HSS turning / tip turning tools
52 Qty various HSS turning / tip turning tools
53 Qty HSS dies to 1 1/4" approx
54 Qty HSS dies to 1" approx
55 Qty various tool steel
56 Qty HSS dies to 1 1/4" approx
57 Qty various plug & thread gauges
58 Qty various plug & thread gauges
59 Hurco ER32 collet set & Hurco ER16 collet set
60 Hurco ER32 collet set
61 Qty various springs, 'O' rings, Circlips, sleeving etc
62 Bridgeport No1 R8 taper boring head
63 Similar R8 taper 70mm boring head
64 Qty HSS end mills, woodruff cutters, reamers etc
65 R8 taper collet holder with collets
66 Qty HSS end mills, slot drills to 25mm approx
67 2x R8 taper keyless drill chucks
68
69
70 Qty various HSS turning / tip turning tools
71 Qty various HSS turning / tip turning tools
72 Qty various HSS turning / tip turning tools
73 3x various boring heads
74 Herbert 50 taper collet chuck with Qty Ericksen etc collets to 32mm
75 2x Clarkson Autolocks
76 Qty various HSS twist drills, reamers, taps, end mills etc
77 5x CI angle plates to 6x5x4" approx
78 Draper D13/5A single spindle bench drill, 160x170mm RF table, 550-2500rpm, 240v
79 Qty various hammers, files etc
80 Qty various size R8 collets
LOT DESCRIPTION
81 Qty various size R8 collets
82 Qty various keyless drill chucks
83 Qty various 30 / 40 taper tool holders, milling cutters etc
84 160mm machine vice
85 150mm machine vice
86 160mm machine vice
87 12" diameter 3 jaw chuck
88 PML-10 crane magnet, 1000kg capacity
89 Qty various Archer collet holders
90 Qty various Bridgeport taper tool holders
91 Qty various taper tool holders, drill chucks etc
92 Qty various taper tool holders, milling cutters etc
93 Qty various Archer collet holders
94 Qty various taper sleeves
95 Narex VHU-80 boring head
96 SAG 130mm diameter boring head
97 Narex VHU-80 boring head
98 3x various taper drill chucks, revolving centres
99 Qty HSS taps to 2 1/2" approx
100
101
102 Asquith No3A collet holder, Clarkson Autolock
103 Qty various tip turning tools
104 Qty various tip turning tools
105 Qty HSS end mills, slot drills to 40mm approx
106 Qty HSS end mills, slot drills to 2" approx
107 Qty various tip milling heads to 80mm approx
108 Qty various taper tool holders, tip boring tools etc
109 Qty various taper tool holders, milling cutters etc
110 Aluminium clamping / riser block set
111 Qty various HSS taper shank twist drills, sleeves etc
112 Qty various hammers, files, saws, tape measures etc
113 Qty various size collets
114 Clarkson int30 taper Autolock, PCM tip heads etc
115 Qty various Lenzkes clamps
116 Qty various taper tool holders
117 9x8x6" approx CI adjustable angle plate
118 24x9x6" CI 'T' slotted cube
119 2x Vertex 3MT tapping heads
120 Qty various tip boring tools, tip milling tools etc
121 Qty various machine collets
LOT DESCRIPTION
122 Qty various machine collets
123 Stanton Thompson LPA-S automatic boring / facing head in wooden case
124 Qty Herbert Devlieg dial gauges
125 Bison 100mm diameter 3 jaw chuck with Qty chuck jaws
126 4x Kennedy etc G clamps to 5" approx
127 Qty various tip turning tools
128 Qty various tip turning tools
129
130
131 Qty HSS dies to 30mm approx, die holders etc
132 3x taper tip boring tools
133 5x taper expanding reamers
134 Qty HSS side & face milling cutters to 5" approx
135 Qty HSS side & face milling cutters to 5" approx
136 Qty HSS taper shank twist drills to 1 1/8" approx
137 2x 3M 314D abrasive cloth workshop rolls
138 JP pneumatic right angle wrench
139 4x various size Vee blocks
140 250x200mm 'T' slotted sub table
141 2x CI 'T' slotted cubes, 9x7x6" & 8x6x5" approx
142 2x CI angle plates, 16x11x11" & 6x5x4" approx
143 250mm diameter 3 jaw chuck
144 Single vertical sliding door storage cupboard, 900x460x1830mm with contents inc: threaded bar, gauges, plastic
storage bins etc
145 Startrite HB330M horizontal bandsaw, 1.5kW motor, variable speeds, s/n 154458 (1997)
146 Weltek welding mask, goggles, Airkos breathing pack etc
147 Hitachi 9" angle grinder, 110v & Dewalt 110v drill
148 Black & Decker P80-20 110v SDS drill, keyless chuck in case, Vandium hexagon sockets in case
149 Makita GA4530 115mm angle grinder & 2x similar 110v 115mm angle grinders
150 Hitachi 9" angle grinder, 110v with Qty various cutting / sanding discs
151 American Pro toolbox with Qty various tools
152 Manual lever pneumatic lift / jack
153 GHD hydraulic garage press, adjustable height, 460mm between columns with hydraulic power pack
154
155
156 Nexus NXM420 mig welder with wirefeed unit & TecArc XC1000 liquid cooling system
157 ThermalArc 300GTSW AC/DC inverter tig welder
158 250mm diameter pull down chop saw, 160mm clamp, 1/2 HP motor on stand
159 Industrial 120 welder on mobile trolley, 120A
160 Single sliding door storage cupboard with contents inc: welding wire, welding rods etc
161 110v isolating transformer
162 2440x1570mm heavy duty welding table (contents not included)
LOT DESCRIPTION
163 Harold Potter floor mounted swing jib, 250kg SWL, 2200mm approx span, 2500mm approx under arm, Stahl
electric chain hoist, pendant control
164 900mm powered manipulator, pendant control
165 Mitchell 50mm wide vertical belt linisher
166 Mobile twin bottle trolley with torches, gauges & hose
167 2x heavy duty pipe / bar rollers
168 Gate RF-1018v horizontal bandsaw, variable feed rate (2003) (no blade)
169 Herbert Devlieg 2B-36 horizontal borer, 36x24" main table, 20x20" rotary sub table, 50-2400rpm, Anilam Wizard
150Plus DRO
170 Twin green metal sliding door storage cabinet, multidrawer with Qty various tooling
171 Lista storage cabinet with Qty various boring tools
172 Herbert 4 spindle in-line drill (power on 1 spindle), 46x16" RF table, 300-2415rpm
173 Large Qty various clamping equipment on rack
174 KRV 2000 turret mill, 1270x250mm table, powerfeed, EMS 2 axis DRO & Bridgeport shaping attachment
175
176
177
178 John Bull dial bore gauge in case
179 Moore & Wright 6-12" micrometer, Starrett 6-12" micrometer
180 Qty various MSE centre finders etc
181 Mercer, John Bull dial bore gauges
182 Baty, Mercer, John Bull dial bore gauges
183 Mitutoyo 18-100mm dial bore gauge set
184 Metric slip gauge set (part complete)
185 Grade 2 imperial slip gauge set (part complete)
186 Metric grade 2 slip gauge set (part complete)
187 Metric grade 2 slip gauge set (part complete)
188 Metric grade 2 slip gauge set (part complete)
189 Qty SPi metric micrometers, 0-25mm to 125-150mm
190 0-1" bench micrometer, Wilson Rockwell test blocks, protractors, bore calipers etc
191 Qty various Mahr, Moore & Wright etc micrometers to 150mm
192 Qty various Moore & Wright etc inside micrometers
193 Verdict 12" hommel type height gauge with 6" riser block
194 1800x1800mm granite surface table
195 30" bench centres
196 3x Moore & Wright micrometers, 36-42", 42-48" & 48-54"
197 Moore & Wright 300-450mm micrometer & similar 300-450mm micrometer
198 50-600mm length setting rods in wooden case
199 Moore & Wright 12-18" micrometer in wooden case
200 Qty Starrett micrometers to 12-16"
201 Qty various micrometers, thread gauges etc
202 Qty Oxford, Kennedy micrometers to 8-12"
LOT DESCRIPTION
203 Qty Linear metric micrometers, 50-75mm to 275-300mm
204 Qty various collets to 26mm
205 Mitutoyo 18-100mm dial bore gauge set
206 SPi micrometer, 800-900mm in wooden case
207 SPi micrometer, 600-700mm in wooden case
208 SPi micrometer, 500-600mm in wooden case
209 Mitutoyo 600mm vernier caliper & similar 1000mm vernier caliper
210 Moore & Wright depth micrometer in wooden case, 7-8" to 18-19"
211 Qty various Moore & Wright depth micrometers, length bars etc
212 Windley 18x12" CI surface plate
213
214
215
216 Herbert Devlieg 2B-36 horizontal borer, 36x24" main table, 20x20" rotary sub table, 50-2400rpm, EMS 3 axis DRO
with Qty tooling
217 Pelloby floor mounted swing jib, 250kg SWL, 2500mm approx span, Clarke StrongArm electric chain hoist, pendant
control
218 Schiess vertical borer, 1000mm dia table, side head, 5 head turret, Acurite III DRO, elevating rail
219 Butler vertical slotter, 1000mm dia table, belt drive, Acu-Rite DRO with equipment
220 Harold Potter floor mounted swing jib, 250kg SWL, 12ft approx span with Kito electric chain hoist, pendant control
221 Herbert Devlieg 43H-72 Spiramatic Jigmill precision horizontal borer, 72x36” main table, 40x30" 'T' slotted sub table,
26-1220rpm, Newall DP700 3 axis DRO
222 Pair 36x20x12" CI heavy duty angle plates
223 Qty Devlieg 50 taper tool holders, boring tools in Linvar Kinda storage rack
224 6 bays light duty storage shelving, 900x300mm shelf size, multi shelf
225 12" heavy duty double ended grinder
226 Qty various lifting chains, shackles, eye bolts, machine skates etc
227 2 bays light duty storage shelving, 900x300mm shelf size, multi shelf
228 Kbahobckoe 2620T horizontal borer, pendant, 8-1600rpm, 50x44” 'T' slotted index table, Newall DP7 3 axis DRO
with equipment (1980)
229 Webster Bennett 60” DH vertical borer, 60” dia table, 72" max swing, 3.8-83rpm, DRO with equipment
230 Kerry R4 36" radial arm drill, 36x24" RF table, 90-1120rpm
231
232
233
234
235 Qty HSS end mills, slot drills to 35mm approx
236 Qty HSS side & face milling cutters to 4" approx
237 Qty HSS side & face milling cutters to 6" approx
238 Qty HSS side & face milling cutters to 6" approx
239 Qty HSS end mills, slot drills to 40mm approx
240 Qty various broach tools
241 Qty various tip boring tools
242 Qty various tip turning tools
LOT DESCRIPTION
243 Qty various tip boring tools
244 Qty various tip turning tools
245 3x 12 ton etc bottle jacks
246 Stan paint spray gun, paint pots & Snauzer paint spray system
247 Qty HSS taps to 1 1/2" approx
248 Qty various tip turning / boring tools
249 Qty HSS straight / taper shank twist drills
250 RML-10 1000kg capacity crane magnet
251 Qty various HSS reamers, taps, twist drills etc
252 Qty various taper tool sleeves
253 Qty various taper tool sleeves
254 Qty tip boring tools
255 Qty tip tools, revolving centres etc
256 Qty various 50 taper tool holders etc
257 Qty various 50 taper tool holders etc
258 Qty various 50 taper tool holders etc
259 Qty various 50 taper tool holders etc
260 Qty various size Allen keys, spanners, hammers, files etc
261 3x various taper tools
262 4x various taper tools
263 Clarkson 50 int taper Autolock with collets
264 50 taper keyless chuck & tapping head
265 Asquith No3A quick change tool holder with Qty holders
266 Kennedy 3 piece hone stone set, KDG dial gauge, micrometers etc
267 Qty various drill chuck, keyless drill chuck, tip tools etc
268 Tucker Fasteners rivet gun
269 460mm digital horizontal scale unit in wooden case
270
271
272 Swift 16V5 heavy duty gap bed centre lathe, 10-600rpm, 20” CH x 120” b.c., DRO with equipment
273 SIP 8" double ended bench grinder, 240v
274 Colchester Magnum 1250 gap bed lathe, 25-1250rpm, 13.5” CH x 96” b.c., DRO with equipment
275 Harrison M400 gap bed lathe, 40-2000rpm, 8” CH x 60” b.c., DRO with equipment
276 Colchester Master 3250 gap bed lathe, 7.5” CH x 50” b.c., 0-3250rpm, DRO with equipment
277 Nexus NXM320 mig welder, 320A
278 600x230mm CI cube & 400x100mm CI angle plate
279 300mm diameter 3 jaw chuck
280 350x300mm CI adjustable angle plate
281 500mm diameter 3 jaw chuck
282 2x various lathe steadies
283 300mm diameter 4 jaw chuck
LOT DESCRIPTION
284 400mm diameter 4 jaw chuck
285 400mm diameter 3 jaw chuck
286 380mm diameter 3 jaw chuck
287 Qty various lathe equipment inc: 400mm diameter 4 jaw chuck, jaws, tool posts etc
288 700mm diameter face plate, adaptor plate
289 Herbert Devlieg 43H-72 Spiramatic Jigmill precision horizontal borer, 72x36” main table, 40x30" 'T' slotted sub table,26-1220rpm, DRO with equipment (reconditioned - 6yrs ago approx)
290 2x mobile storage racks with Qty various plastic storage bins
291 2x heavy duty Vee blocks, 600x200mm approx
292 Pair CI heavy duty angle plates, 900x500x300mm approx
293 Pair CI heavy duty angle plates, 900x500x300mm approx
294 400mm diameter rotary table
295 400x400mm CI angle plate
296 Devlieg 400x300x500mm machine block
297 Devlieg 400x300x500mm machine block
298 Pair CI heavy duty angle plates, 1550x600x600mm approx
299 Harold Potter floor mounted swing jib, 4500mm approx span, 500kg SWL, Morris electric chain hoist, pendant control
300 8 step industrial step ladders
301 Halo triple section ladders
302 4x steel work stands
303 Beach multidrawer toolbox
304 8 drawer storage cabinet
305
306
307 10 drawer storage cabinet, 760x700x1130mm approx
308 Multi compartment storage rack with contents inc: nuts, bolts, washers, grub screws etc
309 5x Multi compartment storage units with contents inc: nuts, washers, screws, seal kits etc
310 1 bay light duty storage shelving with contents inc: floor bolts, wire rope, cable etc
311 BHL No5 MP35 heavy duty lever press, 11" throat, 13x10" bed
312 8" manual shear & Bison 6" throat manual press on bench
313 4x 25ltr drums Sarlube 68 machine lubricant (unused) with manual pump
314 1 bay light duty storage shelving with contents inc: bolts, washers, saw blades etc
315 1200x480mm metal workbench, built in storage
316 2x mobile factory radiant heaters, 240v
317 ThermoQuartz heater & Rhino heater, 240v
318 Morris 1 ton electric chain hoist, pendant control on pallet
319 2x Masterlife etc manual chain hoists
320 1250x700x500mm approx mobile forkable tipping skip
321 Jungheinrich TFG320 gas forklift truck, 2000kg capacity, triple low mast, sideshift, 4350mm max height with forks & jib attachment (2005) (possible battery fault)
322 Doosan G185 gas forklift truck, 1750kg capacity, side shift (delayed collection)
LOT DESCRIPTION
323 2000kg capacity manual pallet truck
324 Mobile sack wheels
325 2000kg capacity manual pallet truck
326 1500mm long fork extensions
327 ClarkeAir SE250200 air compressor on 200ltr air receiver, 10 bar max pressure, 23CFM, 5.5HP (2016)
328 Mitsubishi L200 Barbarian Lb Dcb Di-D 4X4 white pick up, 2477cc diesel engine, 5 speed manual gearbox, leather
interior, Sat Nav, 106,722 miles, 1 previous owner, MOT expires 26/06/2020, 12Reg
329
330
331 Qty various HSS / tip turning tools
332 3x tip boring tools, twist drills
333 Qty various drill chucks, sleeves etc
334 Qty various HSS taps, reamers, centres etc
335 350x150mm mag chuck
336 Pickavent JWP355 thread restorer set in wooden case
337 Clarkson 50 int taper Autolock
338 Clarkson 50 int taper Autolock
339 200mm digital vernier caliper in case
340 Qty various size files, spanners etc
341 Qty various CI angle plates, Vee blocks
342 3x die holders
343 Record Leader 36" stillson
344 Beech 2450x1800mm 'L' shape office desk with pedestal unit, filing / storage cupboard, leather swivel chair
345 Brother MFC-5490CN colour all in one printer
346 Fellowes Mars A3 laminator with laminating pouches
347 240v paper shredder
348 Toshiba eStudio 2050C A3 colour photocopier
349 5x Matsui, Kobe oil filled electric office heaters, 240v
350 Fuefly BK20FF20FA fly zapper
351 Matsui MAT-9KACW portable air conditioning unit, 1100W, 240v
352 3x Panasonic KX-T7665, Panasonic TX-T7630, TX-T7633, TX-T7630 digital super hybrid system telephones
353 Contents of office inc: 2x beech 'L' shape desks, 6x pedestal units, white boards, 3x chairs, storage & filing cabinets
354 Weymouth Parallel Motion drawing board
355 5x Triumph etc metal 4 drawer filing cabinets
356 2x light oak 1800x1200mm 'L' shape desks
357 Tan 1400mm wide leather effect 2 seater sofa
358 4x Kinnarps sliding door wooden storage cupboards, 800x450x1050mm approx
359 4x Kinnarps sliding door wooden storage cupboards, 800x450x1050mm approx
360 4x Van Blerk, Escoline etc 4 drawer metal filing cabinets
361 Dark brown 1250mm wide leather effect 2 seater sofa
362
End Of On-Line Auction Sale
IMPORTANT NOTE:All information supplied by the auctioneer in promotional material, catalogues etc.
is provided in good faith but may not be correct. No liability is accepted by the auctioneer or their Clients for incorrect information and it is the responsibility of the purchaser to
satisfy themselves by physical inspection with regard to: General description, measurement, location, age, general conditions, environmental or health and safety conditions,
removal requirements etc.All Purchasers who do not inspect are deemed to
have waived the right to this facility and all sales are deemed to be ‘as inspected’ and ‘as is, in situ.’
Any bid is accepted on the above basis only and all terms are governed by English law.
PLEASE NOTE: ACCEPTANCE OFOFFERS AND SUITABILITY OF
PURCHASERS FOR SOME OR ALL OFTHE EQUIPMENT IS AT THE EXCLUSIVE
DISCRETION OF THE VENDORS.
PHOTOGRAPHIC IDENTITY WILLBE REQUIRED FOR VIEWING
Peaker Pattinson (Auctioneers) Ltd reserve the right to sell equipment prior to the sale.
Buyers premium of 15.5% + VAT (at current UK rate) will be charged in addition on all lots (Exported items: Applicable VAT may be refunded on production of satisfactory shipping documents)
P P
www.ppaucti
ons.com
Peaker Pattinson (Auctioneers) LtdThe Grange Offices, Aunby, Stamford, Lincs, PE9 4EE EnglandTel: +44 (0)1778 590111 Fax: +44 (0)1778 590730 Email: [email protected]
VIEWING: Tuesday 9th June 2020 - By appointment only
(other dates may be available by prior appointment only) At: Malt House, Malt Cottages, Nottingham,
Nottinghamshire, NG7 7DX, England.
Airport:East Midlands (17 miles)
Railway Station:Nottingham (3 miles)
Hotels:Mercure Nottingham Sherwood Hotel
+44 (0) 115 935 9988Premier Inn - Nottingham City Centre
+44 (0) 333 321 1373 Hilton - Nottingham +44 (0) 115 934 9700