ontr+ mdu rfog - tron elektroniken.tron.com.tr/wp-content/uploads/2016/12/ontr-rfog-node.pdf ·...
TRANSCRIPT
ONTR+ CATV Indoor Optical Node is an Optical/RF converter to be used at the
entry points of multi-dwelling units on RFOG and FTTB networks.
ONTR+ has Automatic Gain Control (AGC), Burst Mode CWDM Laser and
optional frequency bandwidth splits for various networks.
ITU CWDM (1270 nm...1610 nm) lasers for return transmitter provides OBI
free solution for 8 MDU units and 1218 MHz on forward path enables
DOCSIS 3.1 compliance.
ONTR+
MDU RFOG - 1.2 GHz
CWDM Burst Mode| DOCSIS 3.1
www.tron.com.tr 1
DOCSIS 3.1 Compatible
DOCSIS 3.1 enables higher data speeds
with a more efficient spectrum and reduc-
es network delay.
Large Optical Input Range
Extended optical input level range
(-6 dBm to +1 dBm) for maximum flexibil-
ity .
Automatic Gain Control (AGC)
Built-in AGC tracks input optical level
changes and provides constant RF output
level.
CWDM Laser for OBI Free Networks
ITU CWDM (1270 nm...1610 nm) lasers for
return transmitter provides OBI free solu-
tion for 8 MDU units.
Forward (Down-Stream)
Optical Features (RX) Wavelength 1550 nm (optional 1310 nm)
Input Optical Power -6…+1 dBm (with AGC)
RF Features Forward Bandwidth Options 54 - 1218 / 85 - 1218 / 105-1218 MHz
Slope Control 20..0 dB
Test Point - 20 dB
Return Loss -16 dB
Receiver Noise Current < 7 pA /√Hz
RF Output Level (100 dBuV, 0dBm Optical Input, CENELEC 42 ch, OMI %3,8)
CTB 60 dBc
CSO 60 dBc
Return (Up-Stream)
Optical Features (TX) TX Laser Options ITU CWDM (1270 nm...1610 nm) | Burst Mode
Optical Output Power 2 mW (3 dBm)
TX Turn On/Off Time < 1.0 μs
RF Features Reverse Bandwidth Options 5 - 42 / 5 - 65 / 5-85 MHz
Input Level Control 20..0 dB
Test Point - 20 dB
Return Loss -16 dB
Link Performance (6dB link loss, 10 km fiber + optical attenuator)
Opt. TX Input Level 18 dBmV (min. 8, max. 27 dBmV)
Max. NPR max. 53 (at 22 dBmV input)
General Features
Connectors 1 F type RF In/Out 1 F Type Test Forward/Reverse 1 SC/APC Optical In/Out
Surge Protection IEEEC62.41 Cat.A3 (6kV,200A)
Powering 170-240 VAC
Power Consumption 8 Watt
Operating Environment Temperature -30…+55 C°
Housing IP54 class protection, diecast housing
Dimension and Weight 105 x 125 x 50 mm and 0,65 kg
- P
REL
IMIN
AR
Y -
TS_ONTR+_V1_Dec16