O&O Barriers

O&O S.r.l 1

O&O S.r.l 2

PROFESSIONAL BARRIERSNIGHT & DAY-SPEED

Arm up to 3 m Inverter technology New bar profile with led light inside High performances control unit buil-in Mod. CSB-SP

New 230 Vac electromechanical barrier designed for intensive use complete with dedicated control unit for amrs from 1,7 to 3 meters and opening time regolable from 0,8 to 2,2 seconds.

O&O S.r.l 3

PROFESSIONAL BARRIERSNIGHT & DAY-3,5

Enclosed in a simple and robust cabinet, this strong and reliable motor is tested up to 40.000 operations per day under toughest weather conditions. Arms lenght from 3 meters (NIGHT&DAY-3) to 5 mt (NIGHT&DAY-5) with opening up to 3 sec.

Arm up to 5 mOpening time from 1,7 to 3 secs.New bar profile with led light insideCataphoresis treatment on cabinet

O&O S.r.l 4

PROFESSIONAL BARRIERSNIGHT & DAY-DD3

(SUITABLE FOR SENSITIVE LOCATION SUCH AS HOSPITALS, POLICE AND FIRE STATION)FEATURES AUTOMATIC “FAIL OPEN” IN CASE OF POWER LOSS

This model features automatic opening in case of power loss without the need for external assistance. This is particularly suited to sensitive sites where waiting for a manual override key in the event of power loss will waste vital time or is not practical.

Arm up to 3 mOpening time of 1,7 secs.Automatic “fail open”Safety at impact by reversing in closing

O&O S.r.l 5

Bar up to 8 m Cataphoresis tratment Opening time of 8 sec. New bar profile with led light inside

PROFESSIONAL BARRIERSNIGHT & DAY-6,8

NIGHT&DAY-6 and 8 was born out of 40 years’ experience in controlling access of large vehicles. With boom lengths of up to 8 meters and an opening time of 8 seconds, its simple construction and straight-forward technology make this barrier an extremely reliable choice.

O&O S.r.l 6

SHARED USE BARRIERSnew UP & DOWN

Small, stylised, simple, cost effective and innovative. This barrier is driven by a 24V motor controlled by a specially designed control unit which tracks the movement, speed, acceleration, deceleration and performs self learning in the event of a power failure. It also incorporates close-protection safety features required for mixed traffic (according to EN12453).

24 Vdc technology For bar up to 6 m Regolable opening time from 2,5 to 6 sec. Suitable for samll parking lots

O&O S.r.l 7

CHAIN BARRIERSPRIVEE

New 24 Vdc chain barrier “PRIVEE” for intensive use. Designed for residential, industrial and private areas and small parking lots with passages up to 16 meters. Extremely resistant, steel case with cataphoresis treatment grey glazing, “PRIVEE” is the best solution for closing public / private areas, great value for money, safe and completely fitted for urban furniture.

24 Vdc technology For passage up to 16 m Intensive use Control unit, receiver and rescue battery built-in Suitable for samll parking lots

O&O Automatic Bollards

O&O S.r.l 8

O&O S.r.l 9

TOTEM Totem is a street cabinet designed for urban areas consisting of one or two interconnecting modules. The lower module is designed to house the electrical components for managing the entire system. The upper module comprises an aluminium fronted panel suitable for mounting a range of access controls such as card readers, key pads, intercoms etc. (accessories purchased separately).

A 360 deg. illuminated cap, made of a ring of high intensity LEDs – green when the

bollard is lowered and red when raised. The LED cap flashes when the drive units are in

motion. Complete with acoustic warning when any connected components are in

motion.

O&O S.r.l 10

Available with or without LED lights cap Simplify installation thanks to severed foundation box New look New debrise stop system IP 67 protection level Hight break-in and dynamic load resistance (crash-test)

“new DAKOTA” ELECTROMECHANICAL BOLLARDS

Back in 1991 was born the first O&O electromechanical bollard, the “DAKOTA”. Studies, tests and important projects, gave the DAKOTA the award of one of the best products in his category. Proof of that are the hundred of worlwide refererences in more than 20 years of productions. More than 50.000 “DAKOTA” sold all over the world let us understand the must-have features for such a kind of products: complete protection from weather conditions, reliability, material quality (completely assemble with European components), high impact resistance, acustic and flashing warnings. The “new DAKOTA” restyling project starts from this important data, adding major improvements to the above features coming from our experience.

O&O S.r.l 11

“EASY” STANDARD BOLLRADS

Born out of careful market research, thorough design techniques and detailed craftsmanship, we have created a simple deterrent bollard which both responds to customer needs and incorporates the qualities that have always distinguished O&O products. EASY is available in two models: EASY Ø115-500 without lights and EASY Ø 200-700 with lights cap.

Economy and quality Up to 1.500 Day manoeuvres 6 mm thick steel body Painted grey RAL 7022 Led light available on EASY Ø200-700

Cap light available only for the EASY

Ø200-700

SEMIAUTOMATIC BOLLARDS

O&O S.r.l 12

O&O S.r.l 13

GAS BOLLARDS “SCUDO-G”:

SCUDO-G Ø114-500

SCUDO-G Ø210-500

SCUDO-G Ø210-700

Avalilable in INOX or painted RAL 7022 steam.

FIXED BOLLARDS “SCUDO-F”:

SCUDO-F Ø219-500

SCUDO-F Ø219-700

COLLAPSIBLE BOLARD “SCUDO-R”:

SCUDO-R Ø115-625

Easy to moveHigh impact resistance

Avalilable in INOX or painted RAL 7022 steam.