FOLLOW FOCUS

WWW.VOCAS.COMMarch 2016

PO Box 191, 1200 AD, Hilversum, Netherlands.Tel.: +31 35-6233707, Fax: +31 35-6233997E-mail: info@vocas.com, Web: www.vocas.com

Vocas products are made in Holland.

MFC-1/1BSee www.vocas.com/where-to-buy for your local reseller.

Your reseller:

0500-3100 MFC-2S CINE kit. Consists of:

0500-1201 MFC-2 Knob standard.

0500-1110 MFC-2 Gear unit 1:1.75 ratio.

0500-1010 MFC-2S 15 mm snap-on bracket.

0500-3000 MFC-2S DSLR kit. Consists of:

0500-1205 MFC-2 Knob standard with stops.

0500-1100 MFC-2 Gear unit 1:1 ratio.

0500-1010 MFC-2S 15 mm snap-on bracket.

0500-3110 MFC-2S Limited Edition CINE kit. Consists of:

0500-1211 MFC-2 Knob wood.

0500-1110 MFC-2 Gear unit 1:1.75 ratio.

0500-1010 MFC-2S 15 mm snap-on bracket.

0500-1300 MFC-2S Palm support wood.

0500-0601 MFC-2 Drive gear M0,8/40 T.

0500-3010 MFC-2S Limited Edition DSLR kit. Consists of:

0500-1215 MFC-2 Knob wood with stops.

0500-1100 MFC-2 Gear unit 1:1 ratio.

0500-1010 MFC-2S 15 mm snap-on bracket.

0500-1300 MFC-2S Palm support wood.

0500-0601 MFC-2 Drive gear M0,8/40 T.

0500-0295-03 3 Pieces: Flexible gear ring with 2 movable stops

0500-2300 Universal MFC-1 kit. Consists of:

0500-0001 MFC-1.

0500-0101 Drive Gear M0,8x46

0500-0295 Flexible gear ring with 2 movable stops

MFC-2S

0500-1010

0500-1010

0500-1010

0500-1100

0500-01010500-0295

0500-12150500-1300

0500-0601

0500-0295-03

0500-1211

0500-1110

0500-1300

0500-0601

0500-1201

0500-1110

0500-1205

0500-1100

0500-0001

0500-1010

MFC-6

MFC-6 gear box 15 mmThere is one gear box is available for the MFC-6, the heart of the MFC-6 system. Different knobs and one of the two available self adjusting drive arms can be mounted. The 15 mm Snap-on bracket allows you to snap the MFC-6 onto 15 mm bars or to one of the two adapter; 19 mm adapter 0500-1560 or 15 mm studio adapter 0500-1565.0500-1500

MFC-6 drive armsTwo different self adjusting drive arms are available for the studio follow focus MFC-6.MFC-6 drive arm 1:1 ratio. This ratio works best with lenses that have a short focus throw, such as DSLR and ENG style lenses. 0500-1550MFC-6 drive arm 1:2 ratio. This ratio works best with lenses that have a long focus throw, such as CINE style lenses. 0500-1551

15 mm to 19 mm Adapter low for snap-onThis 19 mm adapter allows the MFC-6 to be used with 19 mm rails.The bracket positions the 15 mm rails lower than the industrial standard to allow the use of very large lenses with the MFC-6. The single red tightening screw securely fastens the adapter to both 19 mm rails.0500-1560

15 mm to 15 mm Studio adapter low for snap-onThis 15 mm studio adapter allows the MFC-6 to be used with 15 mm studio rails.The bracket positions the normal 15 mm rails lower than the industrial standard to allow the use of very large lenses with the MFC-6. The single red tightening screw securely fastens the adapter to both 15 mm studio rails.0500-1565

MFC-6 The new Vocas studio follow focus MFC-6 has a very big advantage compared to our competition, a self–adjusting drive arm! A high quality follow focus still can work poorly because of improper calibration. With the new Vocas self-adjusting drive arm this prob-lem belongs to the past!

The new Vocas studio follow focus MFC-6 has the same modular design as the Vocas follow focus MFC-2. Having the same modular design makes it possible to exchange accessories like the different knobs and drive gears!

Drive gears Due to the shared modular design with the MFC-2 system the same drive gears can be used on the MFC-6!MFC-2 Drive gear M0,8/36 T 0500-0600MFC-2 Drive gear M0,8/40 T 0500-0601MFC-2 Drive gear M0,8/46 T 0500-0602MFC-2 Drive gear M0,8/54 T 0500-0603MFC-2 Drive gear M0,8/36 T x 18 mm wide 0500-0605MFC-2 Drive gear M0,6/48 T 0500-0610

Focus knobsDue to the shared modular design with the MFC-2 system the same drive gears can be used

on the MFC-6!

MFC-2 knob standardThe MFC-2 knob standard is made of industrial plastic and has a standard follow focus acces-sory attachment. A scale is included. 0500-1201

MFC-2 knob woodThe MFC-2-knob is made of walnut wood and has a standard follow focus accessory attach-ment. A scale is included. 0500-1211

MFC-2 knob standard with stopThe MFC-2 knob is made of industrial plastic, has a standard follow focus accessory attach-ment and 1 adjustable stop. A scale is included. 0500-1205

MFC-2 knob wood with stopThe MFC-2-knob is made of walnut wood, has a standard follow focus accessory attachment and 1 adjustable stop. A scale is included. 0500-1215

Ready to use kits:

0500-4011 MFC-6 1:2 kit. Consists of:

0500-1500 MFC-6 gear box 15 mm

0500-1201 MFC-2 knob standard (2x)

0500-1551 MFC-6 drive arm 1:2

0500-0601 MFC-2 drive gear M0,8/40 T.

0500-4010 MFC-6 1:1 kit. Consists of:

0500-1500 MFC-6 gear box 15 mm

0500-1201 MFC-2 knob standard (2x)

0500-1550 MFC-6 drive arm 1:1

0500-0601 MFC-2 drive gear M0,8/40 T.

0630-0010

0500-1201

0500-1201

0500-1565

0500-0601

0500-1550

0500-1500

0500-1560

0500-1551

March 2016

See www.vocas.com/where-to-buy for your local reseller.

Your reseller:PO Box 191, 1200 AD, Hilversum, Netherlands.Tel.: +31 35-6233707, Fax: +31 35-6233997E-mail: info@vocas.com, Web: www.vocas.com

Vocas products are made in Holland.

MFC-2 knob standard The MFC-2 knob standard is made of

industrial plastic and has a standard fol-low focus accessory attachment.

A scale is included.0500-1201

MFC-2 knob woodThe MFC-2-knob is made of walnut

wood and has a standard follow focus accessory attachment.

A scale is included.0500-1211

MFC-2 knob wood with stopThe MFC-2-knob is made of walnut wood, has a standard follow

focus accessory attachment and 1 adjustable stop.A scale is included.

0500-1215

MFC-2 knob standard with stopThe MFC-2 knob is made of industrial plastic, has a standard follow

focus accessory attachment and 1 adjustable stop.A scale is included.

0500-1205

MFC-2 gear unit Two different gear box for the MFC-2 follow focus.

MFC-2 Gear unit 1:1 ratio. This ratio works best with lenses that have a short focal range, such as DSLR and ENG style lenses.

0500-1100 MFC-2 Gear unit 1:1.75 ratio. This ratio works best with lenses

that have a long focal range, such as CINE style lenses.0500-1110

MFC-2S palm support woodWooden palm support attachment for the MFC-2 follow focus.

Fits directly onto the 15 mm bracket. It allows you to support the camera with your hand while still allowing access

to the focus knob.0500-1300

MFC-2S 15 mm snap-on bracket15 mm snap-on bracket for the MFC-2 follow focus which allows you to snap the MFC-2 onto the 15 mm bars for easy use and has the

horizontal adjustment for the MFC-2 integrated.0500-1010

MFC-2 drive gearsMFC-2 Drive gear M0,8/36 T 0500-0600MFC-2 Drive gear M0,8/40 T 0500-0601 MFC-2 Drive gear M0,8/46 T 0500-0602MFC-2 Drive gear M0,8/54 T 0500-0603

MFC-2 Drive gear M0,8/36 T x 18 mm wide 0500-0605 MFC-2 Drive gear M0,6/48 T 0500-0610

MFC-2 Drive gear M0,5/60 T 0500-0620

MFC-1This compact follow focus system, the MFC-1, enables you to control the focus with more precision. Made from machined aluminum and other high-tech materials, this follow focus is up to the level of the most demanding camera man.0500-0001

MFC-2 spare scaleSeparate scale for the MFC-2 follow focus. This item is included in all

MFC-2 knob modules and is only meant as a spare.0500-0700

Drive gear for the MFC-1Drive Gear M0,8x36 for the MFC-1. 0500-0100 Drive Gear M0,8x46 for the MFC-1.0500-0101 Drive Gear M0,8x40 for the MFC-1. 0500-0102 Drive Gear M0,6x48 for the MFC-1.0500-0110Drive Gear M0,5x60 for the MFC-1.0500-0120Drive Gear M0,5x75 for the MFC-1. 0500-0121

StarknobStarknob for the Vocas follow focus MFC-1 & MFC-2S. Also compatible with other brands.0500-0500

Flexible cable 500 mmFlexible cable 500 mm for MFC-1 & MFC-2S. Also compatible with other brands.0500-0400

Flexible gear ring with 2 movable stopsFor use with cilindrical lenses with a focus barrel diameter between 40 mm and 110 mm.0500-0295

3 Pieces: Flexible gear ring with 2 movable stopsFor use with cilindrical lenses with a focus barrel diameter between 40 mm and 110 mm.0500-0295-03

Spare scale for MFC-1Separate scale for the MFC-1 follow focus. This item is included with the MFC-1 and is only meant as a spare.0500-0300

Gear extender for the MFC-1This attachment moves the drive gear further away from the follow focus gear box.0500-0150

MFC-2 The MFC-2S, a revolutionary follow focus with a deviating

design philosophy! It’s modular design, incredible adjustability and unique wooden palm support make it the

perfect follow focus for any camera configuration.