operacion de sistemas power shift- d4e
TRANSCRIPT
-
8/3/2019 Operacion de Sistemas Power Shift- D4E
1/6
Clutch Operation
The transmission has three speeds FORWARD and three speeds REVERSE. It has
planetary gear systems and five hydraulic clutches.
Clutch Operation
(Typical Example) 1. Piston. 2. Spring. 3. Plates. 4. Ring gear. 5. Discs. 6. Clutch housing.
The five transmission clutches are the disc type and in separate housings. Each clutch
has discs (5) and plates (3). The inside teeth of discs (5) are engaged with the outside
teeth of ring gear (4). Notches on the outside diameter of plates (3) are engaged with
pins in the clutch housing. The pins hold the plates stationary.
In the example above, springs (2) are between clutch housing (6) and piston (1). The
springs keep the clutches disengaged (not engaged). The clutches are engaged when oil
is sent into the area behind piston (1). When the pressure of the oil in the area behind
the piston increases, the piston moves to the right. The piston moves against the force of
spring (2) and pushes the discs and plates together. The clutch is now engaged. The
discs hold ring gear (4) stationary. When the clutch is released, the pressure in the area
behind piston (1) decreases and the force of spring (2) moves the piston to the left. The
discs and plates are now apart. The clutch is not engaged.
-
8/3/2019 Operacion de Sistemas Power Shift- D4E
2/6
Clutch Identification
The two front clutches (No. 1 and No. 2) are direction clutches. The No. 2 clutch is the
FORWARD direction clutch. The No. 1 clutch is the REVERSE direction clutch. The
three rear clutches (No. 3, No. 4 and No. 5) are speed clutches.
A speed and a direction clutch must be engaged in the transmission before power goes
through the transmission.
Power Flow Through The Transmission
-
8/3/2019 Operacion de Sistemas Power Shift- D4E
3/6
Transmission Components 1. Manifold assembly. 2. No. 5 clutch. 3. No. 5 clutch housing. 4. No. 4
carrier. 5. No. 5 clutch gear. 6. No. 4 clutch. 7. No. 4 planet gear. 8. No. 3 clutch. 9. No. 3 planet gear. 10.
No. 2 clutch. 11. No. 2 planet gear. 12. No. 1 clutch. 13. No. 1 clutch ring gear. 14. No. 3 and No. 4 sun
gear. 15. No. 1 carrier. 16. No. 1 planet gear. 17. No. 4 clutch ring gear. 18. No. 1 and No. 2 sun gear. 19.
No. 3 carrier. 20. No. 4 clutch housing. 21. No. 3 clutch ring gear. 22. No. 2 and No. 3 clutch housing. 23.
No. 2 clutch ring gear. 24. No. 1 clutch housing. 25. No. 2 carrier. 26. No. 1 and No. 2 carrier ring gear.
The directional clutch section is made up of the No. 1 and No. 2 clutches and No. 1 and
No. 2 planetary carriers. The No. 1 clutch is the reverse directional clutch. The No. 2clutch is the forward directional clutch. The No. 1 clutch ring gear and No. 1 carrier are
connected together and turn as a unit. The No. 1 and No. 2 carrier ring gear, No. 2 and
No. 3 carrier, and No. 4 carrier are connected together and turn as a unit. The speed
clutch section is made up of the No. 3 (3rd speed), No. 4 (2nd speed) and No. 5 (1st
speed) clutches and No. 3, No. 4 and No. 5 planetary carriers. The No. 4 clutch ring
gear is connected to the No. 5 carrier. The No. 3 sun gear is a part of the output shaft.
The No. 4 and No. 5 sun gears are connected to the output shaft.
In the illustrations that follow, circles give the indication that the clutches are engaged.
The darker components are the components that move and send power through the
transmission.
-
8/3/2019 Operacion de Sistemas Power Shift- D4E
4/6
First Speed Forward
First Speed Forward
(No. 2 and No. 5 clutches engaged)
The No. 2 clutch ring gear is kept stationary. This will cause the No. 2, No. 3 and No. 4carriers and No. 5 clutch to turn. The No. 5 clutch is also engaged. The torque will then
go to the No. 5 clutch gear and output.
Second Speed Forward
Second Speed Forward(No. 2 and No. 4 clutches engaged)
The No. 2 clutch ring gear is kept stationary. This will cause the No. 2, No. 3 and No. 4
carriers to turn. The No. 4 clutch ring gear is kept stationary by the engaged No. 4clutch. The No. 4 planet gears move around the inside of the No. 4 clutch ring gear and
drive the No. 4 sun gear. The No. 4 sun gear is connected to the No. 5 clutch gear and
output.
-
8/3/2019 Operacion de Sistemas Power Shift- D4E
5/6
Third Speed Forward
(No. 2 and No. 3 clutches engaged)
The No. 2 clutch ring is kept stationary by the No. 2 clutch. The No. 3 clutch ring gear
is kept stationary by the No. 3 clutch. The No. 2 sun gear will drive the No. 2 planet
gears which move around the inside of the No. 2 clutch ring gear and turn the No. 2carrier. The No. 3 planet gears are driven around the inside of the stationary No. 3
clutch ring gear and drive the No. 3 sun gear, No. 5 clutch gear and output.
First Speed Reverse
First Speed Reverse
(No. 1 and No. 5 clutches engaged)
The No. 1 clutch ring gear and No. 1 carrier are kept stationary by the No. 1 clutch. The
No. 1 sun gear will drive the No. 1 and No. 2 clutch ring gears through the No. 1 planetgears. This will cause the No. 2, No. 3 and No. 4 carriers and No. 5 clutch to turn in the
opposite direction. The No. 5 clutch is also engaged, the torque will then go to the No. 5
clutch gear and output.
In second speed reverse, the No. 1 and No. 4 clutches are engaged. The power flow
through the directional clutch section of the transmission is identical to first speed
reverse. The power flow through the speed clutch section of the transmission is the
same as for second speed forward.
In third speed reverse, the No. 1 and No. 3 clutches are engaged. The power flow
through the directional clutch section is the same as for the first speed reverse. Powerflow through the speed clutch section is the same as for third speed forward.
-
8/3/2019 Operacion de Sistemas Power Shift- D4E
6/6