operating instructions and service manual€¦ · in-service procedures 11 . operating instructions...

Operating Instructionsand Service Manual

1-800-998-5018www.championchair.com

“ELEVATE”

1 OM00ELV8 Rev 3 effective 110118

CONTENTS

ITEM PAGE Contents 1 In-Service Information 2 Special notes 3,4 Chair capacity information 5 Receiving new chairs 6-10 New chair inspection 6 New chair assembly 7 Attaching the upholstery 8,9 To report damage 10 Return authorization 10 Storage 10 In-service procedures 11 Operating instructions 11-18 Safe operation of the chair 11-13 Caster brakes 14 Arm rest adjustment 15 Use of remote control handset 15 Rapid adjustment of seated and recumbent positions 15 Adjusting individual parts of the chair 15 Handset 16 Trendelenburg foot switches 17 Central brake 17 Battery unit 18 Setting height of chair 18 Optional chair accessories 19-21 Comfort T2 Multifunctional Table 19 IV pole (4 prong) 19 Push bar 20 Universal holder for tablets and smartphones 20 USB charging unit for smart devices 21 Transparent protecting plastic cover for legrest 21 General maintenance and care of chairs 22 General Cleaning Precautions 22 General cleaning 22, 23 General disinfecting/infection control - vinyl 24 Safety Inspection & Troubleshooting 25 Routine safety inspection 25 Checking the electronic control 25 Recycling of used parts and special waste disposal 25 Warranty procedure 26 Service information 27 Parts identification 27 Service Parts Form 28 Service Parts 29


In-Service Information It is very important to Champion that our customers review all the materials in the in-service package they receive. By reviewing the in-service materials provided, you increase the useful life of the products by helping to prevent their improper use, which may lead to premature damage and wear. You are also helping to validate your warranty, as warranties cover material and workmanship failures, not misuse or abuse. Use these in-service tools for new employees and as a “refresher” for current employees. The following resources are available for you to assist your staff and patients in operating the chairs properly.

Website: www.championchair.com Operators Manuals on CD

Vinyl Cleaning Manual also on CD YouTube: www.youtube.com/user/ChampionChair1992

Field Sales Reps In House Sales Reps

Network of Service Technicians In House Service Team

You should receive an Operator’s Manual in printed form or on CD with each shipment of chairs you receive from Champion. If you did not or would like information on any of these additional resources, please contact Champion’s customer service department at 800-998-5018. NOTE: Not all chair functions, options and/or accessories are covered in the CD. NOTE: The information contained in this document is subject to change without notice.

http://www.championchair.com/

http://www.youtube.com/user/ChampionChair1992


WELCOME!

Champion Manufacturing Inc. would like to thank you for selecting our products. We take great care in making certain that our products leave the factory in flawless condition. Our products are properly packaged to arrive in that same condition. We hope that our product will contribute to your patient’s well-being, relaxation and comfort during treatment. We welcome your suggestions. Please inform Champion Customer Service (800-998-5018) if you have any special wishes or questions concerning our product. Our staff will be glad to advise you and provide further assistance. We hope that you enjoy using your chair and thank you for placing your confidence in us.

SPECIAL NOTES

WARNING/ CAUTION These terms refer to actions that may result in injury to your patient or staff member and/ or damage to your product. Damage caused by improper operation of your chair is not covered by your warranty.

Symbols used in the Operating instructions and on the chair

This symbol marks information, which is relevant for the safety and must be observed.

Maximum patient weight (lbs)

Safe working load (lbs)

Degree of protection against electric shock type B applied part

For indoor use only


Equipotential connector (*)

Measuring earth point

Protecting network

Please do not sit to the leg rest

Do not drive onto the mains cable

Do not drive onto the handset cable

WARNING: This recliner is designed to meet the needs of a wide range of patients. Some patients, due to their unique medical condition, may need assistance as they sit down or rise from a seated position. It is the responsibility of the care provider to assess these needs and provide assistance to frail, weak, or otherwise unsteady patients. Failure to follow these instructions can result in patient falls with potentially serious injury resulting.

CAUTION: The Elev8 is NOT designed to transport patients.


CHAIR CAPACITY INFORMATION

ELV8: Maximum patient weight: 200 kg (440 lbs)


RECEIVING NEW CHAIRS

CAUTION: New chair inspection must be done by someone who has read and understands the instruction pages. Improper operation of the chair may damage the chair and void your warranty. CAUTION: Before plugging chair into wall outlet, it should be checked for condensation on the electrical components and dried if necessary. The chair should reach room temperature prior to plugging it in. New chair inspection

1. Remove all packing material including foam wrap and poly bag. If desired, the bag may be replaced after examination.

2. Examine chair surfaces for damage.


New chair assembly

1. Verify the handset connection plug is appropriately inserted into the receptacle suitable on the electronic box found under the seat. (Figure 1)

Before switching the chair on, it should be checked whether condensation (possible with a temperature change) is present on the electrical components. If there is precipitation, then the chair has to be allowed to reach room temperature. The control box does not work without closing plugs that should be connected tightly into the proper socket on the left side (Figure 1)

Power cable

Closing plug OR Emergency stop switch connector

Handset connector

Motor connectors (*) (In case of less motors are connected end cap must be connected)

Battery unit connector (*) (In case of no Battery unit end cap must be connected)

Figure 1 Electronic control system


Attaching the upholstery:

1. Using the handset, adjust the chair so the leg rest is in line with the seat plate and the backrest is vertical (Figure 2). This is the easiest position in which to attach the upholstery.

2. Pull the two straps on the back of the upholstery onto the frame (Figure 3, Figure 4).

Figure 4

3. With the velcro straps found on the two sides of the sitting part of the upholstery, secure the upholstery to the frame (Figure 5).

Figure 2 Figure 3

Figure 4

Figure 5


4. Attach the headrest pillow to the backrest by inserting the leather strip through the guide (Figure 6).

5. Secure the armrest strap included in the accessories to the armrest. The armrest strap is used to position the remote control handset.

Check whether the mains or the handset cable is not stretched or ends up under the wheels or another object while operating the chair.

3. Using the handset operate all chair functions. Position the chair such that sufficient space

is available to enable unhindered adjustment of the chair in any position and access from all sides.

WARNING: The power chair must be plugged into a properly grounded outlet and must not be modified in any way. If the 3 prong plug does not fit your outlet, have one installed that meets your local codes by an electrician. DO NOT use a (3) prong to (2) prong plug adapter. Consult an electrician if you are unsure that the outlets are properly grounded.

CAUTION: Operating the recliner mechanism when the chair back or footrest is restricted and cannot move up and down freely will damage your mechanism. Be certain that the chair DOES NOT make contact with the walls, counters or other furniture or equipment.

Figure 6


To report damage

1. If the freight carrier is still at your location (it is your right to hold the freight carrier while you thoroughly inspect your delivery), note any damage on the bill of lading. Be sure to keep shipping cartons, pallets and other shipping materials to prove damage to the freight carrier. It is also important to save an undamaged carton and pallet in case the chair must be returned to the factory.

2. Call Champion’s customer service immediately to report the damage: 800-998-5018.

3. All claims must be filed by the consignee and reported to Champion Manufacturing Inc.

within 5 days of receipt of the shipment. Return authorization

1. Champion customer service must authorize all returns. Champion customer service will issue a return authorization number by fax or email. The customer does have the right to refuse any damaged chair from the carrier at the time of delivery.

2. All returns must be sent prepaid by the sender with the exception of provable shipping

damage.

Storage

1. Cover chair and store in a dry area.

2. DO NOT place objects on top of the chair that may damage the vinyl. 3. DO NOT double stack cartons of chairs.

The equipment and its packaging have to be protected from moisture. The top of the factory cardboard packaging may not be loaded. The equipment packaged on the wooden rack in the cardboard box may not be tilted from the horizontal position, which is marked on the box, while storing or moving it.


IN-SERVICE PROCEDURES

Before chairs are put into service, all personnel should review this manual. In the belief that an actual demonstration of the product is more effective than written instructions, an on-site in-service by a Champion representative may be available depending upon the delivery circumstances. It is extremely important that chairs are operated properly and used in the manner in which they were designed. Certain improper methods of operating the chair can damage the chair and void the warranty. In the event that you do not receive your in-service packet, call customer service to obtain one: 800-998-5018.

CAUTION: DO NOT overload chair. Observe the specified maximum weight capacity for the chair model that you have selected.

OPERATING INSTRUCTIONS

Safe operation of the chair

Always check whether the power cord and the handset cable are intact before switching the unit on.

For a long working life and in order to guarantee user safety, we recommend that the following points be observed:

● Position the chair in such a way that it is accessible from all sides and does not knock

against walls or other equipment when fully extended.

Not keeping safety distances around the chair during backrest adjustment could result in the chair backrest being driven into the wall behind the chair, this may cause additional dynamic overload on the backrest of the chair and lead to pivot bolt damage.

Emergency shut off of the chair: In an emergency, disconnect the chair’s power plug and the battery plug from control unit in order to shut off the chair. The power plug and battery plug must always be accessible during operations so that it is possible to shut down the chair at any time.


The below picture makes the installation instructions evident:

Please keep the prescribed safety distances around the chair in order to avoid any damages of the frame!

Do not use the chair for patient transfer!

The Manufacturer shall not take responsibility for any consequences of misplacement and abnormal use.

● The brakes must always be locked when chair is not being moved, to ensure a

firm hold. Otherwise, there is a risk of accident.

● The chair should always be entered or existed from the side with the armrest folded up at telescopic version.

● Do not sit on the armrests or load it with too heavy weight.

Figure 25 Expected safe operational environment


● The chair should not be entered or exited over the legrest, because stepping on the legrest

can cause the chair to tip over or be damaged.

● Do not sit onto the backrest when it is folded back, because the chair can tip over.

● Prevent the power cord from being damaged, because a damaged cable can cause fire or electric shock: - the power cord should not end up under the therapy chair wheels or another heavy

object, - don’t leave the power cord near a source of heat, for example a heater, - when pulling the power cord out of the outlet hold the plug not the cord.

• Replace handset immediately if key pad membranes are damaged to avoid further damage

or short circuits caused by liquids entering the handset.

Do not open the cover of the control box, because its protection cannot be set up again and voids the warranty!

Always check whether the power cord and the handset cord are intact before switching the unit on.



Caster Brakes

Always set the caster brakes before allowing your patient to get in or out of the chair. Release the caster brakes only when the chair is being relocated; and reset the caster brakes upon arriving at your destination. Never assume that the caster brakes have been set; check to ensure that the caster brakes are engaged before helping anyone in or out of the recliner. Armrest adjustment

The height of the armrest can be adjusted by pulling the indexing plunger on the telescoping rail, moving the armrest up or down and then pushing it back again. By loosening the knurled knob directly under the armrest, the armrest can be rotated and slipped (*) up and down along its longitudinal axis. The distance between the armrests can be adjusted by rotating the armrest. The enhanced mobility of the armrests makes it possible to comfortably seat differently sized patients. Folding the armrest up to the backrest facilitates entering the chair from the side (Figure 7).

Figure 7 Telescopic armrest (chair appearance may vary from photo)

Flexible height adjustable armrest for universal medical applications provides more flexible adjustability of the armrest in order to achieve the most suitable rest position during treatment. (Figure 8)

Figure 8 Flexible height adjustable armrest (*) for universal medical applications

- longitudinal adjustment

- height adjustable feature

- additional hinge of armrest

- rotating the armrest



Use of the remote control handset The adjustment of the chair is done by using the handset (Figure 10). The chair moves only as long as a button of the handset is depressed. The control of the chair makes it possible that more than one motor is active at any time. Depressing any button is signalled by a LED on the handset.

More than two minutes of uninterrupted pressing of the button should be avoided!

After 2 minutes of continuous operation of the motors, an 18 minute pause must be observed.

Rapid adjustment of seated and recumbent positions The control of the chair makes possible to adjust the entering and bed positions rapidly and easily by using the handset’s buttons in the yellow field. Trendelenburg position Adjusting the chair to Trendelenburg position rapidly can be done by using the handset’s button in the red field. During the rapid adjustments three motors (leg rest, the angle of the seat and the back) work together. By operating the individual motors separately, we can deviate from the previously adjusted position. Adjusting the individual parts of the chair With the help of the handset, the patient can adjust the chair according to individual comfort requirements. In order to move the individual part of the chair (backrest, seat tilt, leg rest) use the▼▲ buttons. The motors of the chair, which control the movements, automatically switch off when the end positions are reached.

CAUTION: DO NOT overload chair. Observe the specified maximum weight limit for the recliner model that you have selected.



Figure 9 Remote control handset

LED indicates battery charging (*) OR Power on (*)

Backrest up

LED indicates button pressing

Backrest down

Seat tilt down

Seat tilt up

Legrest down

Legrest up

BED position

Head-down position

ENTRY/LEAVE

ENTRY / LEAVE position

Seat height down Seat height up



Trendelenburg foot-switches Independently of the handset the Trendelenburg foot-switches can be used to place the chair into the Trendelenburg position (Figure 10). Trendelenburg foot-switches on both sides of underframe allows hands-free operation for the staff in case of emergency situations and also prevents unintended misuse by the patient. Central brake

The central brake can be simply locked by pedal (Figure 11).

TRB foot switch on both sides of underframe

Figure 10 Trendelenburg foot-switches

push to unlock (green opened

padlock symbol)

brake pedal

Figure 11 brake pedal

push to lock (red locked

padlock symbol)



Battery unit The chair is equipped with a Battery unit to ensure the operation of chair during power failure assuring the patient’s comfort. In this case

• the handset operates, • the Trendelenburg foot-switches on the bottom frame operate from battery,

The battery charge is indicated by CHARGE LED on the handset (Figure 9). If the yellow CHARGE LED on the handset is lighting continuously the battery unit is charged. If the yellow CHARGE LED is fleshing the battery unit is charging. In case of power failure use the electronic adjustments only for Emergency or exiting the chair in order to save battery capacity.

Note! In case of battery back-up operation depressing any button of the handset signalled by a short sound!

After 2 minutes of continuous battery operation the battery should be charged by plugging chair into wall outlet. Do not connect the battery onto external charge device.

Setting height of chair

Figure 12 Motorized seat

height adjustment

Motorized height adjustment column


OPTIONAL(*) CHAIR ACCESSORIES

Accessories are features that may be ordered for your Champion chairs at any time. Some installation may be required. Accessories can be installed in the factory or in the field by the facility.

Comfort-T2 Multifunctional table (*) It can be mounted on either side of the chair (Figure 13).

WARNING: DO NOT use table as a seat.

IV pole (4 prong) (*)

It can be installed onto either side of chair and the height is adjustable (Figure 14).

Figure 13 Comfort-T2 Multifunctional table

Figure 14 IV pole holder

By pushing the release button, the IV pole can be easily removed

IV pole (4 prong) height adjustable

IV pole can be installed onto either side of chair


OPTIONAL(*) CHAIR ACCESSORIES

Push bar (*)

Allows for easy repositioning of the chair (Figure 15).

Universal holder for tablets and smartphones (*) The chair can be equipped with a universal mobile phone and tablet holder for smart devices from 4” to 10.1” screen dimensions. It can be installed onto both sides of chair. (Figure 16).

Figure 15 Push bar

Figure 16 Tablet & smartphone holder

Tablet and smartphone holder with flexible arm

360°

120 - 200 mm 4 – 10.1” sizes

Rotatable joint It can be 360° rotated which is convenient for video

t t i t


OPTIONAL (*) CHAIR ACCESSORIES

USB charging unit for smart devices (*) The chair can be equipped with an USB charging unit to charge Patient’s mobile phone or tablet. It can be installed onto both sides of chair. (Figure 17).

Note: If the USB charger socket is out of use please insert the protecting plug in to the socket to avoid liquid ingress.

Transparent protecting plastic cover for leg rest (*) The plastic cover is attached by hook and loop straps onto upholstered leg rest. Removable for easy disinfection and cleaning. (Figure 18)

Your chair’s appearance may not look like the chair pictured.

Figure 17 USB charging socket

protecting plug

Figure 18 Transparent protecting plastic

cover for the leg rest


GENERAL MAINTENANCE AND CARE OF CHAIRS

WARNING: Never clean or maintain your chair with an occupant in the chair. Keeping the chair clean is the main maintenance requirement. Routine maintenance and periodic safety check is required to keep your chairs performing at their best. Each facility should check their chairs and set their own maintenance schedule. If a part becomes worn or broken, see the sections regarding service and warranty for information, please reference service and warranty section of this manual.

GENERAL CLEANING PRECAUTIONS

WARNING: When solvent type cleaners are being used, care should be exercised. KEEP AWAY from fire or flame and use in a well ventilated area.

CAUTION: High pressure wash or “hosing down” chairs is not recommended.

CAUTION: Use of vinyl “conditioners” or “protectants” is not recommended. Vinyl “conditioner” or “protectants” can cause plasticizers to migrate out of the vinyl causing it to become embrittled. This will prematurely age your vinyl and is not covered under warranty. Some institutional cleaners or disinfectants may cause discoloration of the vinyl. Use of cleaners, other than those recommended by the vinyl manufacturer, is at the clinics own risk. Follow the vinyl manufacturer’s cleaning recommendations. Certain medications may produce a metabolite in the patient’s perspiration which can stain or discolor fabric. If you have any questions, please call Champion’s Customer Service Department at 800-998-5018 with the serial number from your chair. The serial number can be found on the frame base, on the back, to the left hand side.


GENERAL CLEANING

First clean on a daily basis the upholstery with warm water and mild soap using damp cloth. Regular and careful cleaning of the upholstery with water in addition to a mild soap can prevent hardening and embrittlement of the upholstered parts from such materials as detergent, sweat, skin oils, hair spray, hand creams and similar things may affect the leather during treatment.

Before cleaning or disinfecting, always unplug the power cord from the wall outlet!

Never clean the chair in wash tunnel or with a high-pressure cleaner nor spray liquids onto it.

Do not use any solvents such as benzene or similar substances.

Avoid ingress of liquid or disinfectant into the electronic control box, motors and remote control handset. Cleaning of the mechanical parts (motor actuating rods, bolts and joints) is not required and not recommended. Abrasive cleaners should not be used.

IMPORTANT: For specific cleaning instructions, please see manufacturer’s cleaning instructions included in the Vinyl Cleaning Instructions also on the in-service disk.

CAUTION: Limit use of strong active solvent cleaners per manufacturer’s instructions; unlimited use may remove the protective finish on the material


GENERAL DISINFECTING/INFECTION CONTROL - VINYL

Note: Infection control standards are the responsibility of the facility. Bleach solution recommendations from a vinyl manufacturer are not intended to supersede the facility’s infection control standards. Information from the vinyl manufacturer is meant to establish an upper limit beyond which damage might occur. A solution of up to 10% bleach and water may be used.

WARNING: NEVER mix ammonia, or a cleaner with ammonia, with bleach as dangerous compounds may result.

CAUTION: Do not use an iodine based solution since vinyl is an iodinophil material and will stain under this condition. If a solution other than a bleach solution is used and you are uncertain if it is iodine based, please test on a hidden portion (bottom back flap) of the vinyl. All vinyl manufacturers recommend use of bleach and water as a disinfectant. For standards specific to your particular vinyl, consult your vinyl cleaning instructions located in a separate file on this disk. For your disinfection standard consult your facility’s standard. For maximum allowable bleach concentration consult information specific to the vinyl your chair is upholstered with per the manufacturer’s cleaning instructions. If you are using disinfection agents other than bleach and water; do not hesitate to call Champion’s Customer Service for assistance in determining whether there may be any concerns about that agent and the vinyl that you have chosen. For any upholstery that is not Champion approved, the facility is responsible for obtaining cleaning instructions on that specific covering. This would include all COM (Customers Own Material) or Custom vinyls. If you do not know what vinyl your recliner is upholstered in, call Champion’s Customer Service 800-998-5018 with the serial number of your chair to obtain assistance.


SAFETY INSPECTION AND TROUBLESHOOTING

Routine Safety Inspection The following inspections and maintenance work should be done in every two years with the Technical Safety Inspection. • The hinges and joints of the leg rest, backrest and armrest should be inspected. • The knurled knob of the armrest should be inspected. • The wheels should be checked to see whether they are securely fastened to the frame. • If the knurled knobs or the mechanical parts of the armrests are damaged, they should be repaired

immediately or exchanged.

Checking the electronic control Replace hand set immediately if keypad membranes are damaged to avoid further damage and short circuits caused by liquids entering the handset.

If the motors do not move change the handset. If the moving is still not possible change the control unit.

The control box does not work without closing plugs that should be connected tightly into the proper socket on the left side (Figure 1).

If you change a fuse or to check/repair inside the electronic control box, the power cord must be disconnected from the wall-socket and battery back-up must be disconnected from the control box. This provides total isolation of the chair from the main voltage.

Recycling of used parts and special waste disposal When the equipment is first commissioned, when it is taken out of service and during the exchange of replacement parts, the following points should be considered: • The packaging is not special waste and should be recycled. • Parts exchanged or replaced after the chair has been used for treatment are to be treated as

special waste. After disinfections, the parts are to be returned for recycling or disposed of as special waste.

• In the event of any questions about the disposal of parts and compliance with legal requirements, please obtain information from your local disposal company.


WARRANTY PROCEDURE

File a Warranty Claim Calling customer service may institute a warranty claim. At that time you will be asked to provide: ● your name and facility name ● your phone, fax number, email address ● the serial number of your product, and ● the nature of your problem Having the above information available at the time that you call will speed the process. In order to provide prompt accurate service it may be necessary to request further information about the chair function to accurately define the problem. Warranty Coverage Your coverage is per the Champion warranty. A copy of the current warranty was provided with this manual for your convenience. Please read this document. Warranty Does Not Apply If: ● Repairs have been made that were not authorized or under the

direction of Champion Manufacturing Inc.’s service department. ● Required repairs are due to normal wear and tear. ● Product has been abused, improperly used or maintained. ● Alterations have been made to the chair. ● Improper cleaning agents or methods have been used. ● Repairs have been made with parts other than Genuine Champion repair parts. Whether your claim is covered under warranty may not always be determined at the time of your call. Where the possibility of improper use exists, a determination will be made upon receipt of damaged components or product. In these cases, components or product will be shipped with the express understanding that if damage is not covered by warranty all costs are the responsibility of your facility. Service Parts will not be sold if your chairs are outside of the product lifetime of eight (8) years unless

• Chairs have been inspected and replacement parts verified as installed properly by an approved Champion technician for an extended life certificate.


SERVICE INFORMATION

The mission of the Service Department is to get your chair up and running as quickly as possible. It is critical that the Service Department know what product you have, and exactly what is wrong with the product. If you have questions or problems, you should never hesitate to call for assistance: 800-998-5018. The most timely and cost effective way for your chair to be repaired is for the Service Department to work with your maintenance department or equipment technician. Determining the Problem What is wrong with the chair should be determined by troubleshooting. The Service Department will assist you with this by asking you questions about the chair function. Serial Number The chair serial number identifies the precise configuration of your chair; this is critical to receiving correct components and instructions. This number is required to process your request. The serial number is located in the back of the chair on the lower left side on the label entitled Champion Manufacturing -Serial #xxxxxx. No parts will be shipped without a Serial Number to which they will be installed.

PARTS IDENTIFICATION

To identify worn or damaged components please refer to appropriate product schematics. To obtain repair part numbers refer to the parts listing key using the schematics page and item number. Parts orders may be placed by using the convenient fax order form in this manual or by calling Customer Service 800-998-5018. When placing an order by phone you will be asked to provide: ● your name and facility name ● your phone, fax number, email address ● the serial number of your product, and ● the nature of your problem Having the above information available at the time you call will expedite the process. In order to provide prompt, accurate service it may be necessary to request further information about the chair function to accurately define the problem.


SERVICE PARTS FORM

Champion Manufacturing 2601 Industrial Parkway, Elkhart, IN 46514 Tel.: –800-998-5018 Fax: –574-293-5760 Customer name: _________________________________________ Customer address: ________________________________________ Tel: _________________ Fax: __________________ Ordering spare parts for Serial Number _______________________

Pieces Art.-Nr. Description E8-ARMHAS Armrest height adjusting stirrup E8-BATTERY Battery unit E8-ELECCBX Electronic control box without reading lamp connector E8-PWRCBL Power cable (Nema 5-15) E8-FOIL Foil of the handset E8-HNDST Handset E8-CSTRCB 7,5 cm twin wheel castor for central operating brake system E8-PDLCBR Pedal for central brake, right E8-PDLCBL Pedal for central brake, left E8-BKRSTMTR Backrest motor E8-SEATTMTR Seat tilt motor E8-LGRSTMTR Leg rest motor E8-SEATHMTR Seat height motor E8-ARMMECH Armrest mechanism for easy patient transfer E8-ARMS Arms (vinyl only) E8-PAD Pad (vinyl only) E8-PILLOW Pillow (vinyl only) E8-ARMSTRP Arm rest strap for handset (vinyl only)

Date: ____________________ Signature: ________________________


SERVICE PARTS

Figure Art.-No. Description Figure Art.-No. Description Electronic parts

E8-BATTERY Battery unit

E8-ELECCBX

Electronic control box without reading lamp connector

E8-PWRCBL Power cable (Nema 5-15)

E8-FOIL

Foil of the handset

E8-HNDST

Handset

Motors

E8-BKRSTMTR

Backrest motor

E8-SEATTMTR

Seat tilt motor

E8-LGRSTMTR

Leg rest motor

E8-SEATHMTR

Seat height motor

Parts for tilt-up armrest

E8-ARMMECH

Armrest mechanism for easy patient transfer

E8-ARMHAS Armrest height adjusting stirrup

Mechanical parts

E8-CSTRCB

7,5 cm twin wheel castor for central operating brake system

E8-PDLCBR

Pedal for central brake, right

E8-PDLCBL

Pedal for central brake, left

operating instructions and service manual€¦ · in-service procedures 11 . operating instructions...

Documents