opsys mw microplate washer - aspect scientific...opsys mw microplate washer the opsys mw is an...
TRANSCRIPT
Opsys MW™
Microplate Washer
The Opsys MW™ is an economical, full-featured 96-well
microplate strip washer. An excellent choice for many
laboratories because of its simplicity, ease-of-use, flexible
and intuitive protocol definition, and options for 12-way (row)
or 8-way (column) microplate washing for full plates or strips.
Flexibility
• The Opsys MW™ provides a surprising amount of flexibility
for its size and price.
• User-definable plate types and wash protocols provide
significant versatility.
• You can wash whole or partial plates by row or column
with interchangeable 8-way and 12-way wash heads.
• Combine prime, dispense, soak and aspirate steps in any
order, defining the duration and repetition of each protocol
step. Soak times can range from 1 to 999 seconds.
• Define, name, save and password-protect up to 10
microplate type definitions.
• Define, name, save, copy and password protect up to 40
wash protocols.
• Control how vigorously the Opsys MW™ cleans the bottom
of each well by choosing the precise wash head height and
sweep method required.
Performance
The Opsys MW™ provides consistent results with low well-
to-well variation. Sweep mode aspiration provides minimal
residual volume on flat bottom microplates.
• Dispense precision of 5% CV for 96 wells, using 300μL of
distilled water.
• Sweep mode aspiration provides a “sweeping” wash head
movement during aspiration to achieve reproducibly low
residual volumes.
• Low residual aspirate volumes of <1μL for U, V, and C
bottom microplates; and <5μL for flat bottom plates
(with sweep mode).
• On-board self-diagnostic routines automatically assure
that the Opsys MW™ is functioning properly each time it is
turned on.
Convenience
The Opsys MW™ provides key features that simplify setup,
protocol definition, operation, and cleanup.
• Compact dimensions conserve valuable bench space.
• 8-way and 12-way wash heads can be quickly and easily
interchanged to wash full or partial microplates by row or
column.
• A “show” function provides quick verification of wash head
height settings when defining a wash protocol.
• Notification to user when the waste bottle is full.
Touchpad controls are clearly marked and easy to use.
T: +44 (0)1829 824 825 | E: [email protected] | W: aspectscientific.com
Opsys MW™ Microplate Washer Specifications
Supply and Sevice OptionsAspect Scientific can supply the Opsys MW™ as either a new or as a fully refurbished and validated instrument, drastically reducing the cost over purchasing brand new equipment. Either option is available to either purchase or loan for any duration to suit your requirements. We provide fully comprehensive technical support packages to ensure you have piece of mind knowing the instrument is covered for all preventative maintenance, breakdowns, updates, technical support and programming support.
FLY0
04-R
EV3-
27.4
.17
Physical SpecificationsLength: 49cm (19.3 in)
Width: 38cm (15.0 in)
Height: 19cm (7.5 in)
Technical SpecificationsNumber of Dispense Buffers 1
Wetted Surface Materials Silicone, HDPE, polypropylene, acetyl resin, and stainless steel
Dispense Buffer 4L container
Waste Buffer 4L container with level (full) sensor
Dispense Volume Range 50 – 999μL (1μL increments)
Dispense Precision 5% CV (with 300μL distilled water across 96 wells)
Soak Time Range 1 – 999 seconds
Residual Aspirate Volume < 1μL for U and V bottom plates< 5μL for flat bottom plates with sweep
Washing Time 3 min 45 sec (typical 5-cycle wash protocol with 8-way wash head)
Protocols Saves 40 named wash protocols
Plate Definitions Saves 10 named plate definitions
Wash Heads Interchangeable 8-way and 12-way heads are available
Display 2-line, 20- charecter backlit LCD
Keypad 21 key tactile sealed membrane
Power RequirementsLine AC Voltage Requirements 100-240 V ± 10%
Line AC Frequency 50/60 Hz
The Opsys MW™
is the ideal compliment to the DYNEX Opsys MR™ Microplate Reader
T: +44 (0)1829 824 825 | E: [email protected] | W: aspectscientific.com