optimal aeration solution for aquaculture - airoxi tube

14
Optimal Aeration Solution for Aquaculture www.airoxitube .com

Upload: airoxi-tube

Post on 16-Jan-2017

81 views

Category:

Business


0 download

TRANSCRIPT

Page 1: Optimal Aeration Solution for Aquaculture - AirOxi Tube

Optimal Aeration Solution for Aquaculture

www.airoxitube.com

Page 2: Optimal Aeration Solution for Aquaculture - AirOxi Tube

About AirOxi Tube

• AirOxi is one of the latest technologies for Aquaculture Aeration.

• Specially designed for commercial use.• Airoxi has been installed in hundreds of acres

of aquaculture ponds till date.

Page 3: Optimal Aeration Solution for Aquaculture - AirOxi Tube

Our Aeration Products

• Airoxi tube.• Airoxi Self sinking tubes.• Airoxi Grid.• Airoxi floating diffuser grid.• Fittings for Airoxi Tube.• Airoxi tube rings.

Page 4: Optimal Aeration Solution for Aquaculture - AirOxi Tube

AirOxi Tube

• AirOxi Tube is made from a special blend of polymers and additives to give it micro holes.

• Airoxi tube is rohs certified.• The micro holes ensures small bubble size and

high standard oxygen transfer rate and standard aeration efficiency

Page 5: Optimal Aeration Solution for Aquaculture - AirOxi Tube

AirOxi Self Sinking Tubes

• The AirOxi self sinking tubes can be installed even after the ponds is filled with water.

• They are “drop and use” design and the rings will stay 1 foot above the pond bottom.

Page 6: Optimal Aeration Solution for Aquaculture - AirOxi Tube

AirOxi Tube Grid

• The airoxi tube grid is 10 mtrs in each grid, with flow control valves.

• Ready to install. • No hassles about installing before season.• Can be also made self sinking grids on order.

Page 7: Optimal Aeration Solution for Aquaculture - AirOxi Tube

AirOxi Floating Diffuser

• Airoxi floating diffuser is ready to use aeration grid with floats specially designed for immediate use.

• Just connect to power supply and it starts.• No piping or separate blower required.• Non- return valve to separate blower from water.• Modular design for easy assembly and storage.

Page 8: Optimal Aeration Solution for Aquaculture - AirOxi Tube

Fittings for AirOxi Tube

• Standard fittings like jointer, start connector / take off, end plug and T, which are needed for assembly and fitting for the tube.

Page 9: Optimal Aeration Solution for Aquaculture - AirOxi Tube

AirOxi Tube Rings

• Airoxi tube rings are ready to use 1 mtr rings.• The number required depends on the blower

size.

Page 10: Optimal Aeration Solution for Aquaculture - AirOxi Tube

Why AirOxi Tube ?

• The oxygen dissolves faster and more uniform.

• It reduces electricity cost by 50%.

• Airoxi tube does not splash water or disturb aquatic life.

Page 11: Optimal Aeration Solution for Aquaculture - AirOxi Tube

Why Airoxi tube?....

• Its low in maintenance.

• It helps in the improvement of Food conversion ratio.

• It increases the yield of fish, shrimp, prawns by 10%.

Page 12: Optimal Aeration Solution for Aquaculture - AirOxi Tube

Why Airoxi tube?....

• It reduces noise upto 75%.

• It can be used 24x7.

• The installation is less expensive and does not require special infrastructure.

Page 13: Optimal Aeration Solution for Aquaculture - AirOxi Tube

Contact us!

www.airoxitube.com https://www.facebook.com/airoxitube/

[email protected]

+91-7285017087

Page 14: Optimal Aeration Solution for Aquaculture - AirOxi Tube

Thank you !