optional accessories 2017 / 2018 en - bruce schwab...watt&sea - 17000 la rochelle - france -...

2
www.wattandsea.com WATT&SEA - 17000 LA ROCHELLE - FRANCE - [email protected] - +33(0) 5 46 41 31 99 CRUISING CRUISING POD CRUISING HYDROGENERATORS Designed in 2008 and continually improved since, the watt&sea hydrogenerators have radically changed energy management on board. They allow nothing less than the total autonomy of sailing boats ! Validated on all seas around the globe, they are the most powerful, reliable and the lightest available on the market. Used by the best sailors, in the most extreme seas of the globe, watt&sea hydrogenerators are recognized around the world as the most advanced and efficient ! 120W production (10A in 12Vcc) at 5 knots Wide range adapted to many sailboats and speeds Ultra light thanks to brushless alternator technology : mounting and dismounting are simplified Propeller behind the leg, protected from floating objects Very silent for everybody’s comfort Hydrodynamic design : unperceivable drag, not affecting boat speed 2-year warranty BENEFITS OPTIONAL ACCESSORIES 280mm Up to 8 knots ref P-280-03 240mm Up to 10 knots ref P-240-03 200mm Up to 12 knots ref P-200-03 200mm adjustable Up to 20 knots ref P-200-03-PVM The adapted propeller for each use : The adapted mounting kit for each transom : Extra accessories : AFTER-SALES SERVICE A. Removable mounting kit for transom : It includes : 1 U-support + 1 V-support + 2 pintles + 1 locker and its pins + bolts. This is suitable for many types of transoms. The mounting of the hydrogenerator becomes simpler and easier. The hydrogenerator can be re- moved without any tool. It is the ideal mounting solution ! Ref FA-03 B. Extra U support for removable mounting kit ref FA-03 : It allows a removable mounting on both sides (port – starboard). With this kind of mounting, the short hydrogenerator is more adapted. Ref U-03 C. Deluxe universal support for all transoms : It allows a removable mounting system correcting the hull angle. Deluxe finish in polished stainless steel. Ref FU-03 D. Lifting and immersion 4:1 hoist : It includes 6m of 6mm-polyester rope with splices + 2x 40mm fiddle blocks (1 with becket) + 2x SS316 snap hooks + 2m of 5mm red polyester rope (immersion) + 2m of 5mm blue polyester rope (lifting). Ref PA-04 E. IP67 waterproof connection kit : It includes 1 male connector + 1 female connector + 2 watertight stoppers + 10m of 3x1,5 mm2 cable. Its high quality guarantees an optimum electrical connec- tion. Ref PL-04 F. Hydrogenerator bags : Especially designed by Outils Océans (France) for the transportation, pro- tection and storage of your hydrogenerator. High strength material on the outside and anti-abra- sion inside. Reinforced straps, drainage holes, storage pocket for spare propeller. Essential ! For 610 mm leg : ref BAG-610-01 For 970 mm leg : ref BAG-970-01 Servicing for hydrogenerator : watt&sea recommends servicing every two years or every 10,000 miles to check the system, bearings and replace oil. Please contact your reseller to check avalaible packages. distributor new C. A. B. D. F. EN 2017 / 2018 new

Upload: others

Post on 08-Mar-2021

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: OPTIONAL ACCESSORIES 2017 / 2018 EN - Bruce Schwab...WATT&SEA - 17000 LA ROCHELLE - FRANCE - contact@wattandsea.com - +33(0) 5 46 41 31 99 POD CRUISING CRUISING CRUISING HYDROGENERATORS

www.wattandsea.comWATT&SEA - 17000 LA ROCHELLE - FRANCE - [email protected] - +33(0) 5 46 41 31 99

CRUISINGCRUISINGPOD

CRUISING HYDROGENERATORS

Designed in 2008 and continually improved since, the watt&sea hydrogenerators have radically changed energy management on board. They allow nothing less than the total autonomy of sailing boats !Validated on all seas around the globe, they are the most powerful, reliable and the lightest available on the market.

Used by the best sailors, in the most extreme seas of the globe, watt&sea hydrogenerators are recognized around the world as the most advanced and efficient !

120W production (10A in 12Vcc) at 5 knots

Wide range adapted to many sailboats and speeds

Ultra light thanks to brushless alternator technology : mounting and dismounting are simplified

Propeller behind the leg, protected from floating objects

Very silent for everybody’s comfort

Hydrodynamic design : unperceivable drag, not affecting boat speed

2-year warranty

BENEFITS

OPTIONAL ACCESSORIES

280mmUp to 8 knots

ref P-280-03

240mmUp to 10 knots

ref P-240-03200mm

Up to 12 knotsref P-200-03

200mm adjustableUp to 20 knotsref P-200-03-PVM

The adapted propeller for each use :

The adapted mounting kit for each transom :

Extra accessories :

AFTER-SALES SERVICE

A. Removable mounting kit for transom :It includes : 1 U-support + 1 V-support + 2 pintles + 1 locker and its pins + bolts. This is suitable for many types of transoms. The mounting of the hydrogenerator becomes simpler and easier. The hydrogenerator can be re-moved without any tool. It is the ideal mounting solution ! Ref FA-03

B. Extra U support for removable mounting kit ref FA-03 : It allows a removable mounting on both sides (port – starboard). With this kind of mounting, the short hydrogenerator is more adapted. Ref U-03

C. Deluxe universal support for all transoms :It allows a removable mounting system correcting the hull angle. Deluxe finish in polished stainless steel. Ref FU-03

D. Lifting and immersion 4:1 hoist : It includes 6m of 6mm-polyester rope with splices + 2x 40mm fiddle blocks (1 with becket) + 2x SS316 snap hooks + 2m of 5mm red polyester rope (immersion) + 2m of 5mm blue polyester rope (lifting). Ref PA-04E. IP67 waterproof connection kit : It includes 1 male connector + 1 female connector + 2 watertight stoppers + 10m of 3x1,5 mm2 cable. Its high quality guarantees an optimum electrical connec-tion. Ref PL-04F. Hydrogenerator bags : Especially designed by Outils Océans (France) for the transportation, pro-tection and storage of your hydrogenerator. High strength material on the outside and anti-abra-sion inside. Reinforced straps, drainage holes, storage pocket for spare propeller. Essential !For 610 mm leg : ref BAG-610-01 For 970 mm leg : ref BAG-970-01

Servicing for hydrogenerator :watt&sea recommends servicing every two years or every 10,000 miles to check the system, bearings and replace oil.Please contact your reseller to check avalaible packages.

distributor

newC.

A.

B.

D.

F.

EN2017 / 2018

new

Page 2: OPTIONAL ACCESSORIES 2017 / 2018 EN - Bruce Schwab...WATT&SEA - 17000 LA ROCHELLE - FRANCE - contact@wattandsea.com - +33(0) 5 46 41 31 99 POD CRUISING CRUISING CRUISING HYDROGENERATORS

www.wattandsea.comwww.wattandsea.com

CRUISING CRUISING

World Cruising Club Corporate Membership 2013Watt & Sea Summary of Benefits

Rally Handbook Advertising ARC Handbook: Half Page ARC Portugal Handbook: Half Page ARC Europe Handbook: Half Page World ARC Handbook: Half Page Caribbean 1500 Handbook: Half Page

Magazine Advertising Spring: Half page Autumn: Half page USA Spring: Half Page

ACTION: For all advert specifications and deadlines, please see Corporate Members Advertising Info document.

Newsletter InsertsInsertion of a flyer in:

ARC Newsletter ARC Portugal Newsletter World ARC Newsletter Caribbean 1500 Newsletter

Handbook InsertsInsertion of a flyer in:

ARC Rally Handbook (300) ARC Portugal Rally Handbook (30) World ARC Rally Handbook (30-50) Caribbean 1500 Rally Handbook (50-70)

ACTION: Please send approx 400-450 copies of promotional material (CD, or A4 flyer max 4 pages) by 21 February 2013.

E-shotsE-shots of your latest products and services, promoting any special offers to:

ARC Participants ARC Portugal Participants World ARC Participants Caribbean 1500 Participants

ACTION: Please send special offer text, photographs and other materials by 1 April 2013. Your e-shot will be timed to achieve maximum impact.

0

100

200

300

400

500

600

40

32

24

16

8

2 3 4 5 6 7 8 9 10 11 1210

100

200

300

400

500

600

40

32

24

16

8

2 3 4 5 6 7 8 9 10 11 121

& PODPower generation up to 600 W, ideal for 35+ feet sailing boats with an average consumption around 10 A in 12 V. For full energy independence when cruising, racing or during long crossings. The output rises exponentially above 6 knots. Delivered with a 240 mm propeller (10 A at 5.6 knots), the CRUISING 600 model can be fitted with a range of 4 propellers for all speeds from 3 to 20 knots !

Available in 2 versions : short leg (Ref PK-610-600) / long leg (Ref PK-970-600)new : POD version (Ref PK-POD-600)

autonomy (10 A)

280 mm prop

240 mm prop

200 mm prop

Speed (KNOTS)

Output power curves(wake coeff. w*=0.95)

Pow

er (W

)

A in

12

V

autonomy (8 A)

280 mm prop

240 mm prop

200 mm prop

Speed (KNOTS)

Pow

er (W

)

A in

12

V

An energy output up to 300 W (24 A in 12 V) for greater comfort when sailing. Designed for boats under 35 feet that usually sail between 4 and 6 knots, with an average consumption of 8 A in 12 V.Delivered with a 240 mm propeller (8 A at 5.2 knots), the CRUISING 300 can produce even more with the 280 mm prop (8A at 4.5 knots)

Available in 2 versions : short leg (Ref PK-610-300) long leg (Ref PK-970-300)

PACK CHARACTERISTICSCharging voltage 12 or 24 V autodetected

Maximum using speed 20 knots with the adapted propeller

Leg length 610 mm 970 mm

Overall length with bracket 920 mm 1280 mm

3-phase wire length 4 m (13 ft)

Compatible batteries All incl. Lithium

Pack contents 1 hydrogenerator1 converter1 240 mm propellerFor transom fit packs :1 low friction ring2 settings forks for transom2 premounted wires1 bag of connectors

Hydrogenerator weight 6.3 kg 7.1 kg 7.4 kg 8.2 kg 5.0 kg

610 mm/300 W970 mm/300 W610 mm/600 W970 mm/600 WPOD 600 W

Converter weight 1.5 kg

Warranty 2 years

12/24V converter includedMPPT and Boost technologies

2 independent outputsto connect 2 battery banks

1 hydrogenerator input1 solar input 50 V-14 A maxenergy at mooring

Propeller designed for hydrogenerationAt the rear, protected against seaweeds and UFOs

efficient and easily removable

Industrial brushless generatorbuilt to last

Oversized & oil-lubricated bearingssilence and durability

Holding bracket with cam cleateasy lifting and immersion

available in 2 lengths610 mm and 970 mm

Locking pin includedto lock the system when immersed

LED indicationto see the production at a glance

""

Output power curves(wake coeff. w*=0.95)