oracle depot repair setup

4
Oracle Depot Repair Course Objectives 1. A Brief of Oracle Depot Repair 2. Prerequisite setups for Inventory 3. Master Items Form to show Item Set Up for Depot Repair Process 4. Create a Service Request 5. RO Creation 6. Repair Type Setup 7. Order booking through Depot Repair Workbench 8. Receiving an item through Depot Repair Workbench 9. Creation of WIP JOB 10. Using the Evaluation TAB 11. Using the Execution TAB 12. Oracle Apps Base Tables 13. Depot Repair Public Packages A Brief of Oracle Depot Repair It happens often that the product bought by customer is either damaged or malfunctioning. To cater this requirement, Oracle provides solution in the form of Oracle Depot Repair Module which tracks the repair process from the time the item is received from customer to the point it is shipped back to the customer after repair. It basically provides the end to end solution covering the following aspects of repair process: Receiving the item Diagnosis of problem(s) Estimate the cost of repair Approval of repair estimate Creation of WIP Job to repair the item Calculation of repair charges Ship the item back to customer Oracle depot repair also covers other scenarios where the item needs to be replaced thus providing holistic end to end solution for the automated depot repair process. Depot repair is tightly integrated with other Oracle modules. Prerequisite setups for Inventory The prerequisite set ups which needs to be taken care are: Go to ‘Service’ TAB in Master Items Form Enable Select Service Request = Enabled To track the items in Oracle Installed Base, enable the check box ‘Track in Installed Base’

Upload: anitlinjinish

Post on 28-Nov-2015

122 views

Category:

Documents


1 download

DESCRIPTION

Oracle Depot Repair Setup

TRANSCRIPT

Page 1: Oracle Depot Repair Setup

Oracle Depot RepairCourse Objectives

1. A Brief of Oracle Depot Repair2. Prerequisite setups for Inventory3. Master Items Form to show Item Set Up for Depot Repair Process4. Create a Service Request5. RO Creation6. Repair Type Setup7. Order booking through Depot Repair Workbench8. Receiving an item through Depot Repair Workbench9. Creation of WIP JOB10. Using the Evaluation TAB11. Using the Execution TAB12. Oracle Apps Base Tables13. Depot Repair Public Packages

A Brief of Oracle Depot RepairIt happens often that the product bought by customer is either damaged or malfunctioning. To

cater this requirement, Oracle provides solution in the form of Oracle Depot Repair Module whichtracks the repair process from the time the item is received from customer to the point it is shipped backto the customer after repair. It basically provides the end to end solution covering the following aspectsof repair process:

● Receiving the item● Diagnosis of problem(s)● Estimate the cost of repair● Approval of repair estimate● Creation of WIP Job to repair the item● Calculation of repair charges● Ship the item back to customer● Oracle depot repair also covers other scenarios where the item needs to be replaced thus

providing holistic end to end solution for the automated depot repair process.● Depot repair is tightly integrated with other Oracle modules.

Prerequisite setups for InventoryThe prerequisite set ups which needs to be taken care are:Go to ‘Service’ TAB  in Master Items Form

● Enable Select Service Request  = Enabled● To track the items in Oracle Installed Base, enable the check box ‘Track in Installed Base’

Page 2: Oracle Depot Repair Setup

● Billing Type also needs to be selected. Select ‘Billing Type’ = Material.Bill of Material needs to be set up otherwise user has to manually enter the BOM while selecting

Service Code            Job can be either WIP based or Task based. Since our project dealt with WIP based job,hence we will cover WIP Job creation in this document.

● When reviewing the WIP setup for Depot Repair, remember that Repair Jobs use thenon­standard WIP functionality.

Master Items Form to show Item Set Up for Depot Repair Process

Create a Service Request            To create a repair order in Oracle Depot Repair module, it is mandatory to create a servicerequest. When we enter details for both the Service Request and the Repair Order, and it creates bothat the same time.

The following fields are mandatory for service request creation● Customer Name or● Customer account number● Enter a brief summary of the repair issue in the Summary text field

RO CreationA Repair Order cannot be created without a Repair Type. When you create a Repair Order is createdOracle Depot Repair, then as on the Repair Type, the application automatically defaults one or moreRMA( Return Material Authorization) and Sales Order lines in ‘Logistics’ Tab with action types ofRepair and Ship respectively. These logistic lines can also be created manually.

In our example, we have used Repair type as “ Warranty ­ Repair and Return". For thisrepair type we have service activity codes as “Return for Repair” and “Ship Repaired Item”

Repair Type SetupThe below screen represents the association of service activity code to repair type.Pre repair:Navigation : Depot Repair Super User ­> Depot Repair ­> Setup ­ > Repair Types

Order booking through Depot Repair WorkbenchIn Logistic Tab ­> select logistic line (where Service Activity code : Return for Repair) and manually

Page 3: Oracle Depot Repair Setup

book order through selecting the ‘Book Order’ check box● Initial status would be ‘ Entered’.

● After clicking the process button the status would be changed to ‘Booked’.

Receiving an item through Depot Repair WorkbenchThis item needs to be received in order to create a WIP job. This can be done through by selecting thelogistic line and select the action “Receive” from Actions LOV. Click on Go button.

Once this is completed the status changes from ‘Booked ‘to ‘Received’.

Creation of WIP JOB● In Depot Repair Module, Job can be created in the following ways:1. High Volume Repair  (HVR) Form2. Repair Estimate Tab in Depot Repair WorkBench3. Repair Jobs Tab in Depot Repair WorkBench● This document explains the process of creation of WIP JOB through High Volume Repair form.● Navigate to Depot Repair Super User­> Depot Repair ­> High Volume Repair.● In this High Volume Repair Form  – Query for RO number● The main body of the Repair Order page contains three tabs ­ Evaluation, Repair Execution,

Debrief Report ­ where you perform the main repair order processing.

Query for RO number in High Volume Repair Form

Using the Evaluation TABThis TAB displays all the diagnostic and service codes that have been associated with the Repair OrderItem and Repair Order History. Here the main tasks are to select the applicable – Diagnostic Codesand Service Codes to generate WIP jobs with appropriate bills and routings.

The process needs to be followed as below:

1. Mark one or more of the diagnostic codes as applicable. The applicable diagnostic codes areused in determining which service codes to use when you click Recommend Services in theService Codes region.

Page 4: Oracle Depot Repair Setup

2. Mark one or more service codes as Applicable.3. Click Recommend Services.

After you click Recommend Services, you may get several service codes returned and automaticallymarked as Applicable in the Service Codes region, depending on how you set up yourrecommendations.

4. Click Generate Jobs

Using the Execution TABNow since the job is created, material issue needs to be done to the job in the following way:

By selecting the items and clicking issue button and selecting the correspondingTechnician Sub Inventory .

Item issued against the WIP Job.

Now technician repairs the item and complete the operation associated with WIP job by clicking on‘Complete’ Button

Now complete the WIP Job by selecting ‘Complete Job’ option and clicking on ‘Go’ button. For thishe needs to enter ‘Completion Sub­Inventory’ and ‘Serial Number’ of item.

Now the WIP job is completed against the Repair Order.

Oracle Apps Base Tables

Ø  CSD_REPAIRSØ  CSD_REPAIR_ACTUALSØ  CSD_REPAIR_ACTUAL_LINESØ  CS_ESTIMATE_DETAILSØ  CSD_PRODUCT_TRANSACTIONSØ  CSD_REPAIR_HISTORY