ordering your gloves ansi / isea · 2019. 8. 3. · • penetration test in accordance with...
TRANSCRIPT
www.stegosafety.com
SA
FETY
SA
FETY
SA
FETY
SA
FETY
SA
FETY
SA
FETY
SA
FETY
SA
FETY
INNOVATION
ER
GO
NO
MIC
ER
GO
NO
MIC
DEXTERITYDEXTERITYDEXTERITY
BR
EA
THA
BIL
ITY
BR
EA
THA
BIL
ITY
BR
EA
THA
BIL
ITY
BR
EA
THA
BIL
ITY
BR
EA
THA
BIL
ITY
BR
EA
THA
BIL
ITY
BR
EA
THA
BIL
ITY
BR
EA
THA
BIL
ITY
BR
EA
THA
BIL
ITY
BR
EA
THA
BIL
ITY
FLEXIBILITYFLEXIBILITYFLEXIBILITYFLEXIBILITYFLEXIBILITYFLEXIBILITYFLEXIBILITYFLEXIBILITYFLEXIBILITY
TECHNOLOGYTECHNOLOGYTECHNOLOGYTECHNOLOGYTECHNOLOGYTECHNOLOGYTECHNOLOGYTECHNOLOGYTECHNOLOGYTECHNOLOGYTECHNOLOGYTECHNOLOGYTECHNOLOGYTECHNOLOGYTECHNOLOGYTECHNOLOGYTECHNOLOGY
PROTECTIONPROTECTIONPROTECTION
CO
MFO
RT
DURABILITYDURABILITY
HAND PROTECTION ENGINEERED. ACHIEVED.
Stego®®® ® Gloves Technologies
STEGO® TECHNOLOGIES INC. 3400 Ridgeway Drive,Mississauga, Ontario L5L 0A2, CanadaWeb: www.stegosafety.com
This leaflet is designed and published by STEGO® TECHNOLOGIES INC. Covered under the intellectual property law. Any reproduction in whole or in part is strictly prohibited without written approval. SLCN10181
EN ISO 374-1 ‘Terminology and performance requirements for chemical risks. It is based on three test methods: • Penetration test in accordance with standard EN 374-2: 2014 • Permeation test in accordance with standard EN 16523-1: 2015 which replaces standard EN 374-3 • Degradation test in accordance with standard EN 374-4: 2013
EN 374:2016 - Protection against dangerous chemicalsand micro-organisms
EN ISO 374-1
NEWOLD
EN ISO 374-1:2016EN 374-1:2003
Protective gloves against dangerous chemicals andmicro-organisms
Protective gloves against chemicals and micro-or-ganisms
Removal of reference to micro-organisms in the textAssumption of protection against micro-organisms
Number of test chemicals increased from 12 to 1812 test chemicals
Beaker icon no longer usedBeaker for “waterproof protective gloves with limited protection against chemical dangers”
Gloves classified as type A, B or CN/A
Change of labeling on the product: pictogram of conical flask with differing number of letters for test chemicals per type
Pictogram of conical flask with at least 3 letters for test chemicals
Type of glovesRequirementNew Marking
Type APenetration resistance (EN 374-2)
Breakthrough time ≥ 30 min for at least 6 chemicalsin the new list (EN 16523-1)
Type BPenetration resistance (EN 374-2)
Breakthrough time ≥ 30 min for at least 3 chemicalsin the new list (EN 16523-1)
Type CPenetration resistance (EN 374-2)
Breakthrough time ≥ 10 min for at least 1 chemicalin the new list (EN 16523-1)
EN ISO374-1 / Type A
EN ISO374-1 / Type B
EN ISO374-1 / Type C
EN ISO 374-5 ‘Terminology and performance requirements for micro-organisms risksThis standard specifies performance requirements for gloves against micro-organisms. Microbiological agents are: bacteria, virus or fungi.
Penetration testing is required for all gloves claiming micro-organisms protection; the test method required are EN ISO 374-2:2014, air-leak and water-leak. The possibility of claiming protection against viruses was added, if the glove passes ISO 16604: 2004 (method B) test.
Two classifications:
ClassProtectionNew Marking
Protection against bacteriaand fungi
For gloves offering protection against bacteria and fungi.
Protection against viruses, bacteria and fungi
For gloves protecting against bacteria, fungi and viruses.
EN ISO 374-5
VIRUS
EN ISO 374-5
Understanding the
STANDARDS 51
233
44555 Understanding the
STANDARDS
Levels of performanceLevel 1Level 2Level 3Level 4Level 5
Abrasion resistance (number of cycles)1005002,0008,000--
Cut (Coup Test) 1.22.55.010.020.0
Tear resistance (N)10255075--
Puncture resistance (N)2060100150--
Cut (TDM-100 Test) (N)ABCDEF
25 10152230
Impact protectionP (Pass), F (Fail), X (Not Applicable)
EN 388:2016 - Protection against mechanical risks
OLDMARKING
Rating
Abrasion1 2 3 4
Cut (Coup Test)1 2 3 4 5
Tear1 2 3 4
Puncture1 2 3 4
4 4 3 4
To account for the new additions of the TDM-100 cut test and impact test to the EN 388 standard, the glove marking will now feature two additional components as seen in the “New Marking” diagram.The updated EN 388 2016 standard will also include an impact protection test.
NEWMARKING
Rating
Abrasion1 2 3 4
Cut (Coup Test)1 2 3 4 5
Tear1 2 3 4
Puncture1 2 3 4
Cut (TDM-100 Test)A-F
Impact Protection(P-Passed, F-Failed, X-Not Tested)
P,F,X
4 4 3 4 D P
ANSI / ISEA105-2016
CUT
ANSI / ISEA 105-2016 Cut ASTM F2992-15 (TDM)
Harm
onizedC
ut Levels
* Newton is approximately equivalent to 102 grams
NEW: ANSI/ISEA 2016
ASTM F2992-15 (TDM)
LEVELGRAMS
A1≥ 200
A2≥ 500
A3≥ 1000
A4≥ 1500
A5≥ 2200
A6≥ 3000
A7≥ 4000
A8≥ 5000
A9≥ 6000
NEW: EN 388-2016
ISO 13997(TDM)
LEVELNEWTONS*
A2
B5
C10
D15
E22
F30
Abrasion resistance testing measures how well the glove resists loss of material from rubbing on rough surfaces. Larger numbers of cycles indicate greater abrasion resistance. ASTM D3389-10 is used for coated gloves and the end point (failure) is the number of abrasion cycles when the film or coating is worn through. ASTM D3884-09 is used for uncoated gloves and the end point is the number of abrasion cycles when the first threat or yarn is broken.
Note: Same with the ANSI Cut, the new abrasion levels will have an “A” listed in front of them in order to differentiate it from the old ones.
ANSI / ISEA 105-2016 AbrasionASTM D3389-10, ASTM D3884-09
NEW: ANSI / ISEA 2016
ASTM D3389-10, ASTM 03884-09
Performance LevelAbrasion Revolution
(tested at 500g vertical force)
0<100
1≥100
2≥500
3≥1000
(tested at 1,000g vertical force)
4≥3,000
5≥10,000
6≥20,000
ANSI / ISEA105-2016
ABR
67
89
1011
SM
LXLXXL
LENGTH Measure from the
bottom of your palm
(where meets your
wrist) to the top of
your middle finger.
WIDTH Measure the width of yourpalm at its widest point below knuckle.
kNOW yOUR GLOVE SIzE
ORDERING yOuR GLOvES
Stego® hand protection gloves are available in wide selection of styles and are designed to meet varying needs of different industries. Each protective glove is rigorously designed and engineered to
provide the best hand solution for our customers.
Consider the following information when placing an order:• Product Article Number• Color and Size information• Required protection and application.• See product information table for details.
Or contact our Stego® Sales Representativeto assist you in selecting the most suitable glove for your needs.
We have made every effort to make this leaflet accurate. Given the number of factors to consider in selecting the appropriate gloves, the users should perform appropriate preliminary tests and evaluations to determine the suitability of the gloves selected for the actual conditions of use. Users are encourage to always use caution and care.
Due to improvement of product performance and availability of materials, there may be specification changes made during the year. Specifications are subject to change without notice.
STEGO® reserves the right to discontinue or drop products, sizes or styles without prior notice. STEGO® DISCLAIMS ALL WARRANTIES OTHER THAN AS EXPRESSLY PROVIDED.
CHEMICALAND LIQUIDPROTECTION
Dear Customer,Stego® is your trusted partner in hand safety. We engineer our gloves for comfort, durability and quality for our customers. We offer optimum safety solutions that are backed by timely quality services. Stego® provides the best protection that consistently performs.
EXTENSIvE HAND SAFETy SOLuTIONS
Customer service is a big part of who we are at Stego®. We help different clientele in tackling their toughest challenges in hand safety and addressing their needs. Our extensive range of safety solutions cater for broad range of risks and applications.
RELIABLE SySTEM OF QuALITy
Stego® hand safety gloves are the foremost choice of users looking for protection and performance. We have built a strong quality system to ensure our products meet protection parameters and international ANSI and EN standards. Our products offer customers quality and longevity along with technical and business support.
STEGO® Team
Stego® Gloves Technologies’ innovative hand protection gloves are engineered for various industries and applications. Our safety gloves are conceptualized, designed and developed to the highest level of protection. We offer protection solutions against cut, mechanical, chemical and impact risks.
STEGO® WORLD OF HAND PROTECTION
MECHANICAL,MULTI-PURPOSEAND PRECISIONHANDLING
IMPACTAND CUTPROTECTION
CUT AND PUNCTURE PROTECTION
Comfort . Durability . Quality
CAT II EN 420 EN 388
4 5 4 3 D
CAT II EN 420 EN 388
4 5 4 4 E
CAT II EN 420 EN 388
4 1 3 1 X
CAT II EN 420 EN 388
4 1 3 1 X
CAT II EN 420 EN 388
3 1 3 1 X
5CUT
TECHNOLOGY 5CUT
TECHNOLOGY
ELASTICATEDCUFFS
PUCOATED
BREATHABLEBACk
SANDyNITRILE
Made of seamless knit HPPE liner that provides long lasting protection against cut, tear and abrasion. Perfect fit with
high tenacity.
Sizes: 7/S | 8/M | 9/L | 10/XL | 11/2XL
EN Cut Level 5 & ANSI Cut A5High performance glove offering
superior protection. Sandry Nitrile palmfor good grip.
Sizes: 8/M | 9/L | 10/XL
CUT DEFENDER-IIST-7096
CUT DEFENDER-IIIST-7097
TACTIFLEXST-2025
TACTIMAXST-2060
FLEXILITEST-6014
OPTI-CHEM GRIPST-1080
1Pair/Poly
144Pairs/Box
1Pair/Poly
144Pairs/Box
1Pair/Poly
144Pairs/Box
1Pair/Poly
144Pairs/Box
1Pair/Poly
144Pairs/Box
Anti-skid nylon knit liner with increased flexibility and breathbility. High abrasion resistance with Nitrile foam coating on
palm for good grip.
Sizes: 7/S | 8/M | 9/L | 10/XL | 11/2XL
ANTI-SKIDLINER
NITRILEFOAM
4ABR
4ABR
Designed for precision handling in various working environments. Made with
Micro-Nitrile foam coating on palm thatgives dexterity and grip.
Sizes: 7/S | 8/M | 9/L | 10/XL
ABR
SOFT PALMTEXTURE
MICRONITRILE
POLyESTERkNIT
LATEXCOATED
Practical choice for users who are looking for great dexterity, fit, flexibility and mechanical
performance. Lightweight and breathable gloves.
Sizes: 8/M | 9/L | 10/XL
HAND PROTECTION ENGINEERED. ACHIEVED.
PVC gloves dipped in rough sandy finish provides excellent protection. Cotton
knitted liner that offers superior performance and absorbs perspiration.
Sizes: 8/M | 9/L | 10/XL
CAT III EN 420 EN 388
4 1 2 1 X
EN ISO 374-1/ TyPE B
A J k
EN ISO 374-5
COTTONLINER
SANDy PALMTEXTURE
Technology
1Pair/Poly
60Pairs/Box
CAT II EN 420 EN 388
4 5 4 4 F P
SHELL SERIESST-9085
1Pair/Poly
60Pairs/Box
High impact and cut protection(EN Cut Level 5 & ANSI Cut A6).
SHELL scale grip on palm for great grip and skid resistance.
Sizes: 7/S to 13/4XL
5CUT
SIDEGUSSET
SHELLSCALE GRIP
EN 420 EN 388
4 5 4 4 F P
SHELL SERIESST-9080
1Pair/Poly
120Pairs/Box
Superior impact and cut protection(EN Cut Level 5 & ANSI Cut A6).
Sandy Nitrile palm for superior grip.Hi-viz color scheme increases visual awareness.
Sizes: 8/M | 9/L | 10/XL | 11/2XL
5CUT
THUMB CROTCH
SANDyNITRILE
ProtectionCategory
Article Number Product Name Cat. EN
420
EN 388ANSI/ISEA 105-2016
CUT
ANSI/ISEA 105-2016ABRASION
EN ISO 374-5
EN ISO 374-1 Colors Quantity Features Applications
A C T P CutTDM Impact
Cut andPuncture
Protection
ST-7096 CutDefender - II II • 4 5 4 3 D - A4 - - - Dark
Grey1pr/poly
144prs/ctn Metal fabrication, construction, glass plants, metal stamping, automotive, assembly works
& handling sharp objectsST-7097 Cut
Defender - III II • 4 5 4 4 E - A5 - - - Black 1pr/poly144prs/ctn
Mechanical, Multi-purpose,and Precision
Handling
ST-2025 Tactiflex II • 4 1 3 1 X - - A4 - - Dark Blue
1pr/poly144prs/ctn
Automotive, electronics, logistics, light assembly, small parts handling, construction,
agriculture & general maintenanceST-2060 Tactimax II • 4 1 3 1 X - - A4 - - Grey 1pr/poly
144prs/ctn
ST-6014 FlexiLite II • 3 1 3 1 X - - - - - Red 1pr/poly144prs/ctn
ChemicalProtection ST-1080 Opti-Chem Grip III • 4 1 2 1 X - - - • TyPE B
A J kLight Blue
1pr/poly60prs/ctn
General chemical handling works, laboratory, petrochemicals, automotive, fishery,
construction, painting & general maintenance
Impactand Cut
Protection
ST-9080 Shell Series II • 4 5 4 4 F P A6 - - - Black 1pr/poly120prs/ctn
Rig drilling, oil & gas, construction, power tool usage, mining, demolition, & material handling
ST-9085 Shell Series II • 4 5 4 4 F P A6 - - - Hi-Viz Green
1pair/poly60prs/ctn
RE SIS
CUT TAN
T
RE SIS
CUT TAN
T
RE SIS
CUT TAN
T
RE SIS
CUT TAN
T
Stego® range of cut performance gloves provide high-quality protection against lacerations and puncture hazards.
Using advancedTEGX® technology, Stego® gloves are technically engineered to prevent hand injuries caused by extreme workconditions and deleterious materials.
to prevent hand injuries to prevent hand injuries caused by extreme workcaused by extreme work
Synthetic fibers
Naturalfibers
High Performance yarns
OUTSTANDING COMFORTMECHANICAL AND MuLTI-PuRPOSEPrecision handling and mechanical needs
Stego® Gloves Technologies’ range of mechanical protection gloves are robustly built for precision handling and multi-purpose needs.
Engineered to perfectly fit with the natural curvature of the hands, Stego® gloves offer optimum comfort and dexterity in every wear. Our mechanical and multi-purpose range has added abrasion and tear resistance features giving the wearer confidence to perform.
Light Oil GripOffers ergonomic and enhanced grip abilities in oilyenvironments in automotive, small part handling, painting, petrochemicals and small part handling.
Dry GripSecure grip for dry environments in manufacturing,construction, masonry, maintenance, and warehousingindustries.
Stego® Impact and Cut Protection Gloves are engineered with high level of protection against impact, vibration and cut hazards with optimum functionality and grip.
SHELL-GRD® is an advanced protectiontechnology that deflects impact force away from the shock point rather than transferring force directly to the hand.
IMPACT
HighPerformanceNeopreneSpandex
Hand
Bone
Stego® Chemical and Liquid Protection range is ergonomically constructed for excellent grip and chemical protection.
Developed with CHEMBLOCK® technology, our gloves offer chemical barrier construction thatresist permeation and liquid penetration againstbroad range of non-corrosive chemicals, acids, solvents, oils, greases, and hydrocarbons.
CAT II