organic chemistry moleculary imprinted polymers as...
TRANSCRIPT
Moleculary Imprinted Polymers as Reagents and Catalysts in Organic Chemistry
Diane CarreraMacMillan Group Meeting
Sept 14, 2005
Good Reviews
Alexander, C. Tetrahedron, 2003, 59, 2025.
Whitcombe, M.J. Synlett, 2000, (6), 911.
Mosbach, K. Curr. Op. in Chem. Bio., 1999, 3, 759.
Motherwell, W.B. Tetrahedron, 2001, 57, 4663.
What are Molecularly Imprinted Polymers (MIPs)?
! MIP synthesis is a three step process:
! MIPs are polymers that contain highly selective recognition sites as a result of polymerization around a template molecule bound covalently or non-covalently to functional monomers
1. Assembly of the template with funtional monomer units via covalent bonding, hydrogen bonding, hydrophobic, !-! or ionic interactions
2. Polymerization around the template/monomer complex, incroporating the monomers into the polymer backbone to create a recognition pocket
3. Removal of the template by washing with organic solvent or acid/base hydrolysis
! To date a wide range of templates have been used including organic compounds, sugars, peptides, nucleotides, proteins, crystals and even cells
What are MIPs Used For?
! Industrial Use
Purification: selectively removing reaction products or by-products
! Organic Chemistry
Stoichiometric Reagents: scavengers, passive supports, supported reagents, protecting groups
" In this aspect they are similar to other polymer supported reagents in that they are valued for their ease of use, however, they offer the advantage of being able to differentiate between enantiomers and regioisomers
Catalysts: C-C bond formation, elimination reactions, mimics of natural enzymes, transition metal mediated reactions
" In this function, MIPs are most often compared to catalytic antibodies and have been shown to catalyze a wide variety of reactions, in some cases exerting control over regio- and stereoselectivity
MIPs as Selective Adsorbents
! Mosbach et. al. developed a method of screening combinatorial steroid libraries using an MIP imprinted with the steroid 11-!-hydroxyprogesterone.
HO
O
O
11-!-hydroxyprogesterone
OH
O
CH2Cl2
HO
O
O
O
O
H
O
O
HHO
O
EGDMA/"
HO
O
O
O
O
H
O
O
HHO
Oacetone
O
O
H
O
O
HHO
O
MIP with steroid recognition siteMosbach, K., Ramstrom, O. Anal. Comm., 1998, 35, 9
MIPs as Selective Adsorbents:
■ The bulk MIP was then packed into HPLC columns and tested for its ability to selectively remove the imprint from a mixture of 12 steroids with various substitution patterns
■ Conclusions:
● MIP showed high selectivity for the template molecule
● Stereochemical information is retained – 11-β-hydroxyprogesterone not selected for
■ Mosbach proposes that MIPs can be used as artificial receptors for screening combinatorial libraries
Mosbach, K., Ramstrom, O. Anal. Comm., 1998, 35, 9
0.1% AcOH/DCM 0.1%-5% AcOH/DCM 0.1% AcOH/DCM
The Anti-Iodiotypic Approach: Imprinting to Find New Drug Candidates
! Mosbach used an MIP imprinted with a kallikrein inhibitor to screen new compounds for activity
Mosbach K. JACS., 2001, 123, 12420
NH
H2N
HN
N
N
N
NH
Cl
F3C
O
OH
DVB
(TFMA)NH
H2N
HN
N
N
N
NH
Cl
O
OH
O
HO
F3C
CF3
! Imprinted sites used to direct synthesis of new compounds by incubating MIP with 1 and adding amine coupling partners 2-4
NH2
Cl
NH2
! Control experiments using template fragments showed that multiple interactions are necessary for better binding
NH2
O
OMe
NH
H2N
HN
N
N
N
Cl
Cl
2 3 41
The coupling product with 4 was shown to inhibit kallikrein with a Ki (5.2 µM) similar to the template coumpound (Ki = 4.5 µM)
MIPs as Adsorbents: Stereoselective Byproduct Removal
! Mosbach takes advantage of the high substrate specificity exhibited by MIPs to selectively remove the undesired product enantiomer in the synthesis of N-(benzyloxy-carbonyl)aspartylphenylalanine methyl ester (ZAPM) from L-aspartic anhydrideand L-phenylalanine methyl ester
Mosbach, K., Ramstrom, O. Anal. Chem., 1998, 70, 2789
O NH
O
O
O
OH2N
OMe
O
O NH
OHN
O
OMe
OCO2H
O NH
O
CO2H
OMeO
NH
O
!-L, L-ZAPM
"-L, L-ZAPM
MIP imprinted against "-L, L-ZAPM increased product purity from 59% to 96%when used for solid phase extraction
! Interesting observations:
" Imprinting with two functional monomers (4-vinylpyridine and methacrylic acid) afforded MIPs with higher affinities that those imprinted using only one functional monomer.
" Imprinted polymer beads were just as effective as bulk polymer in selective removal of "-L, L-ZAPM
MIPs as Chiral Microreactors
! First reported independently by Shea (cyclopropanation) and Neckers (photodimerization) in 1980
Wulff, G. Macromol. Chem. Phys., 1998, 190, 1717&1719
! Wulff used this concept to synthesize !-amino acids from glycine using Schiff base chemistry
B
O
ON
OH
O
B
O
ON
OH
O
B
OH
OHO
OH
O
O
H3N
B
OH
OHN
O
B
OH
OHN
OH
O
O
NiO
HO
B
OH
OHN
O
NiO
HO
OH
1. Ni(OAc2)
2. DBU
DVB
O
H Me
HO OH
Me
NH2
O
HO OH
Me
NH2
O
HO OH
Me
NH2
O
HO OH
Me
NH2
O
36% ee
threonine allo-threonine
electrophile approach at the Si face of the enolate is controlled by the chiral environment of the recognition pocket
H
H2O/MeOH
Reactive MIPs: Stereoselective Supported Reagents
■ Bystroem showed that MIPs can regioselectively reduce steroids and also exhibit a measure of enantiocontrol
Bystroem, S. JACS., 1993, 115, 2081
■ Swelling is very important, better template removal and higher conversion is observed in polymers with high swellability (200%) than those with low swellability (120%). However, low swelling polymers exert a stronger stereochemical influence
■ Results
O
O O
HO
O O
H
H3AlO
O
O
H
O
OH
H
DVB LiAlH4
● Complete preference for reduction at C17, this preference is reversed when imprinted with ester at C3
● Obtain a 70:30 mix (β, α) with templated polymer vs. 96:4 for the control polymer
MIPs as Protecting Groups for Polyfunctional Substrates
! Whitcombe et. al. designed MIPs that serve as protecting groups for regioselective steroid acylation. Careful control experiments showed that the template was covalently rebound within the polymer. However reactivy was poor and attributed to the inablility of the reagents to access the steroid in the recognition site
Whitcombe, M.. JACS., 1999, 121, 6640
! Imprinting with a template designed to create a larger recognition pocket resulted in greater reactivity
BO
OHNH
O
HO
OH 1.
2. DVB, CHCl33. THF, MeOH, H2O
P3
2. Ac2O, pyridine
HO
OHHO
HO
OHAcO
only 5-10% conversion
HO
OH
H
OtBu
OB
O
OHNH
O1.
2. DVB, CHCl33. THF, MeOH, H2O B
ONH
O
OB
HN
O
HO
OH
extra space for reagent access
deoxycholate
HO
OH
H
OH
HO
OH
H
OAc
P4
P4 64% conv
1.
3
24
24-Ac/3-Ac = 10.5Ac2O, pyridine
Catalytic Applications of MIPs
! MIPs are well-suited for catalytic applications
! In order for catalysis to occur, an MIP needs to stabilize the transition state of the reaction more than the starting materials or the product. Therefore, to create an MIP catalyst a transition state analog (TSA) is used as the imprinting template.
" The recognition site is geometrically well-defined and can exert stereoselectivity
" They exhibit a high degree of substrate specificity
C • TS
S
TS
P
C • P
C • S
!!Guncat
!!Gcat
!G
For catalysis: !!Guncat > !!Gcat
! Ironically, the characteristics that make MIPs useful as catalysts, the rigidity of the recognition pocket and tight substrate binding can also lead to problems such as low reactivity and product inhibition
Carbon-Carbon Bond Forming Catalysis
! Matsui and Mosbach designed an MIP with class II aldolase activity by imprinting with a dibenzoylmethane(DBM) cobalt(II) complex
! Three polymers were imprinted, the first with the DBM-Co2+ complex, the second with DBM and and the third with Co2+
. DBM had the greatest affinity for the DBM-Co2+ MIP while acetophenone, benzaldehyde and chalcone had very low affinities
! Reaction rate was eight times faster in the DBM-Co2+ MIP as compared to solution phase. Addition of DBM inhibited the reaction which the authors interpret as proof that the reaction is taking place within a recognition pocket, not just on the polymer surface
O
Me
O
H
O
O O
TSA
O O
Co2+N N
Aspects of TSA design
Turnover – dicarbonyl vs !,"-unsaturated ketone
Reactivity – 4-vinylpyridine also acts as base
Stabilization – # $# interactions with polymer backbone
Matsui, J., Mosbach K. JACS., 1996, 61, 5414
aldolase
Carbon-Carbon Bond Forming Catalysis
! Mosbach employed the same technique to make an efficient Diels-Alder MIP catalyst
! Kinetic studies demonstrated a 270-fold rate enhancement over the reaction in solution
! Addition of chlorendic anhydride (TSA) resulted in 41% inhibition of the MIP catalyzed reaction, indicating that the reaction occurs within the polymer cavities
Mosbach K. Makromol. Rapid. Comm., 1997, 18, 609
O
O
O
Cl Cl
Cl
Cl
Cl
SO2
Cl
Cl
Cl
Cl
O
O
OSO2
O
O
O
Cl
Cl
Cl
Cl
Cl
SO2
O
O
O
Cl
Cl
Cl
Cl
HO
O
EGDMA/CHCl3TSA
P1
yield (mM)
P1:
control:
solution:
15
6
5
Ester Hydrolysis: A Common Target for Enzyme Mimics
■ The ester hydrolysis activity of proteases, such as trypsin, chymotrypsin and subtilisin, are attractive targets because their mode of action using the "catalytic triad" of serine, histidine and aspartate residues is well understood.The catalytic triad: a proton shuttle
O
OAspN
N
His
H O
H
O
OAspN
N
His
O
H
SerSer
HO
R'NH
R HNO
R'R
O
OAspN
N
His
O
H
Ser
H2N R
OR'
■ Mimic the tetrahedral intermediate with a phosphonate ester
HN R'
O OHSer
OP
R'
R''O O
R R
Drawing on the Catalytic Triad for TSA Design
■ First attempt by Mosbach using a substrate analog proved to be unsuccessful, saw only a 2-fold rate enhancement as compared to control polymers
NNH
■ Imprinting with a TSA resulted in a more active polymer
O
OO2N
OP
Me
O2NO O
Co2+N
HN
1,4-dibromobutaneN
NH
OP
Me
O2NO O
Co2+N
HN
1. MeOH/phosphonate buffer2.
O2N
OHO
HO Me
■ The TSA successfully inhibited the MIP catalyzed reaction but did not affect reaction with a control polymer
Mosbach, K., Robinson, D. J. Chem. Soc. Chem Comm. 1989, 969
◆ - control polymer
- MIP
[Inhibitor] / mM
k2
Drawing on the Catalytic Triad for TSA Design
! Shea and Sellergren went further by mimicking all three catalytic triad residues and were able to catalyze the hydrolysis in a stereoselective manner by imprinting with D-phosphonate ester TSA
Sellergren, B., Shea, K. JOC., 2000, 4009
N
HN
O
P
OEt
OHN
TSA
O
HO 1. EGDMA
2. MeOH, F– or OH–
O
BuOt
N
HN
HO
O
HO
O
OH
O
OH
Sellergren, B., Shea, K. Tet. Asym., 1994, 1403
P1
NO2
O
O
BOCNHNO2
HO
O
BOCNHOH
P1kD/kL = 1.9
kMIP/kcontrol = 2.5
kMIP/ksolution = 10
! Extensive control experiments using polymers inprinted with a variety of templates examine the importance of the different characteristics of the TSA.
Sellergren, B., Shea, K. JOC., 2000, 4009
Sellergren, B., Shea, K. Tet. Asym., 1994, 1403
Probing the Source of Reactivity
O
P
OEt
OHN
O
BuOt
N
HN
O
P
OEt
O
H2N
N
N
O
O
ON
HN
H2NO
NH
O
O
N
NH
steric demands
substrate analog
defined imidazole geometryachiral non-TSA
! Also examined the effect of pH, hydrolysis conditions and degree of polymer swelling
! Conclusions
" H-bonding involving the carboxylic acid groups primarily drives stereoselective binding
" The imidazole group is responsible for catalytic action
" Higher reactivity is seen with a TSA vs a substrate analog
Designing a Functional Monomer to Increase Reactivity
! Wulff used a technique dubbed stoichiometric non-covalent imprinting to produce the most active ester hydrolysis MIP to date
! Polymers cross-linked with DVB were more active than those with EGDMA, attributed to hydrophobic interactions with the substrate
Wulff, G. ACIEE., 1997, 1962
! Observed product inhibition with ester substrates, demonstrated similarly enhanced hydrolysis rates for carbonates and carbamates without exhibiting product inhibition
NH
NH
O
O P
O
OONH
NH
amidine monomer: arg mimicAssociation constant of the amidine monomer for carboxyl groups is > 106 M-1
OAr
OHO2C
OO
O
O
DVB EGDMA
ksolution kMIPksolution/amidine kpolymer/amidine
1.0 2.4 102.2 20.5
Elimination Reactions
! The elimination of 4-fluoro-4(p-nitrophenyl)butan-2-one is the model reaction Shea chose to study
! Functional monomer orients the substrate and acts as a base
Shea, K.; Beach, J. JACS, 1994, 379
! Rate of MIP reaction was lower in polar solvents, implying that hydrogen bonding is playing an important role. This effect is opposite of what would be expected for an E2 mechanism
OF
O2N
O
O2N
–HF
O
O
OO
H3N
HN
O
H3N
HN
O
ktemplate = 3.2kcontrol
H2N
HN
O
H2N
HN
O
F
O2NH
O1. EGDMA/MAA2. NaOH
F
O2NH
O3.
H
MIPs inTransition Metal Mediated Catalysis
! As MIPs are highly crosslinked, their rigidity can enforce binding orientation about the metal and directionality of substrate approach
" MIPs offer the added benefit of ease of use and purification
" Can control inner and outer sphere geometry around the reactive metal species
" Lemaire reported some of the first work in 1995, the enantioselective hydride reduction of acetophenone using a Rh complex
O OH
*
[Rh]
" The reaction occurred with very low ee, leading him to investigate different types of imprinting templates.
Lemaire, M. Tet. Lett., 1995, 36, 8779
The Importance of Using the Right Template
! First generation MIP used a chiral Rh complex as the template but gave low ee's when compared to the homogenous catalyst (55% ee)
! Imprinting the chiral Rh complex along with a substrate template resulted in polymers that gave higher ee's
N N MeMe
Ph Ph
N N MeMe
Ph Ph
Rh
OCN
R
NCO N N
Ph Ph
N N
Ph Ph
Rh O
HN
NH
O
NH
NH
25-33% ee
N N MeMe
Ph Ph
N N MeMe
Ph Ph
Rh
NH HN MeMe
Ph Ph
[Rh(cod)Cl]2
Me
ONa
CH2Cl2
Me
O
O
OH
89% conv, 43% ee
OH
42% conv, 43% ee
S-MIP
R-MIP
Lemaire, M. Tet. Lett., 1995, 36, 8779
Multiple Attachments Result in Greater Reactivity
! Building upon the idea of a functional monomer in non-metal catalysis, they produce active MIPs by using a modified metal ligand that is incorporated into the polymer backbone
! Severin and Polborn use a phosphonate ester TSA to design an MIP for the transfer hydrogenation of aromatic ketones
Ru
HNH
O
H RRu
HNH
O
PO R
R
O
R
OH
TSA
RuN
S
O
OO
P
ONH2
1. EGDMA, CHCl3Ru
NS
O
OCl
NH22. BnNEt3Cl, MeOH
Obtained crystal structure of organometallic TSA
! Using a diamine ligand with two styrenyl substituents lead to even greater activity
S
HN
H2N
OO
S
HN
NH OO
20% conv after 25min5% conv after 25min
Severin, K.; Polborn, K. Chem. Comm., 1999, 2481; Chem. Eur. J., 2000, 6, 4604
Pd Cross-Coupling Catalysts
! By controlling the geometry around Pd, Cammidge is able to produce MIP catalysts that are more active than the equivalent solid supported catalysts
! MIP catalyzed Suzuki and Stille couplings occur with higher yields than with a non imprinted polymer supported catalyst
MIP:
polymer:
solution:
Cammidge, A.; Bellingham, R. Chem. Comm., 2001, 2588
P
P
Pd
O
O
cattechol ligand enforces cis square planar geometry to accelerate the rate limiting reductive elimination step
polymerizable PPh3 ligands provide structual rigidity in the recognition site
OMe
Br
B(OH)2
yield
81%
56%
55%
OMe
Br
Ph
Ph
Ph
Ph
Sn(Bu)3, "Pd" (3%)
OMe
Bu BuBu
OMe
yield
65-95%
trace
65-95%
Et2O/H2O, Na2CO3reflux, 3h
"Pd" (3%)
Et2O/H2O, Na2CO3reflux, 3h
Not All Recognition Sites Are Created Equal
! Gagne wants to take advantage of MIPs' ability to control a catalyst's outer coordination sphere but initial results lead him to conduct a thorough investigation of site variation within the polymer
P
P
Bu
Bu
O
OPt
HClOH
CF3
HO
HO
P
P O
OPt
P
P O
OPt
CF3
CF3P
P Cl
ClPt
! "The amount of imprinting ligand released by treatment of an MIP with a given reagent is inversely related to the steric bulk of that reagent, implying that a distribution of Pt sites with varying accessibilities exists within the polymer."
Gagne, M.; Brunkan, N. JACS, 2000, 122, 6217
83% 67% 27%
Not All Recognition Sites Are Created Equal
! MIPs imprinted with (R)-Bu2BINOL preferentially rebound (R)-BINOL when exposed to racemic BINOL.
P
P
Bu
Bu
O
OPt
HO
HO
! Selectivity increases over time, eventually stabilizing at 65-70% ee after 8 hours, leading the authors to conclude there is a kinetically controlled initial binding event and thermodynamic ligand exchange within the polymer.
Gagne, M.; Brunkan, N. JACS, 2000, 122, 6217
P
P O
OPt
HO
HO
(R)-MIP Bound (R)-BINOL Unbound (S)-BINOL
P2Pt(OAr)2
P2Pt(R -BINOL)
P2Pt(S-BINOL)
R-BINOL
S-BINOL
R-B
INO
L S-B
INO
L
" - % ee rebound BINOL
! - % Pt sites bound
Not All Recognition Sites Are Created Equal
! In order to determine the kinetic selectivity of the most tightly imprinted and least accessible sites, (R)-Bu2BINOL imprinted polymer is allowed to react with rac-BINOL, then exposed to rac-Br2BINOL at higher temp.
! The least accessible sites in the MIP are significantly more selective than easily accesible sites. But as any reaction is more likely to occur in an easily accessible site, how can MIPs be made more selective?
Gagne, M.; Brunkan, N. JACS, 2000, 122, 6217
P
P O
OPt
Bound (R)-BINOL
P
P O
OPt
Bound (R)-BINOLin selective sites
P
P O
OPt
Bound (R)-Br2BINOLin unselective sites
rac-Br2BINOL
Br
Br
Br2BINOL
rebinding
temp (oC)
% Pt sitesbound by Br2BINOL
% Pt sitesbound by BINOL
Br2BINOL% ee
BINOL% ee
% Pt sitesrebound(total)
60
80
100
41
46
50
46
58
61
20
13
8
89
94
94
61
59
58
Can Chiral Poisoning Lead to Better Selectivity?■ Gagne examined the effect of chiral poisioning with BINAM in the glyoxylate ene reaction
■ Even though the chiral BINAMs effectively poisoned the corresponding MIP catalysts, no enhancement in ee was observed.
Gagne, M. Organometallics 2002, 21, 7
H
O
OEt
O
OEt
O
OHP2Pt2+ 2 mol%
rt, CH2Cl2
solution:
PS-BINOL:
PR-BINOL:
% ee
75
72
25
% conv
98
98
61
time
30 min
3 hr
3 hr
MeOMeO
PP
Ar Ar
PtXX
Ar Ar
Ar =
X = Cl,R-BINOL, S-BINOL
S
■ Hypothesized that the BINOL imprinted cavity is too large to have an effect on the transition state of the ene reaction, the chirality of the product comes entirely from the chiral environment created by the phosphine ligands
Poison (%)
Conv (%)
Conclusions
! MIPs have a wide range of uses in organic chemistry as both stoichiometric reagents and catalysts
! Careful design of imprinting templates results in polymers that can differentiate between regio- and stereoisomers, making them useful as scavengers, supported reagents and protecting groups.
! A wide range of covalent and noncovalent interactions can be used in designing an imprinting template. In general, using a combination of different types of interactions results in more active and selective MIPs
! MIPs offer a new way to approach enantioselective catalysis and offer new ways to control the aspects that determine the stereochemical outcome of a reaction by allowing a chemist to fix reactive components in three dimensional space.
! More investigation into the homogeneity of recognition sites and thorough characterization of the various factors that affect the reaction in the site is needed before MIPs become a truly useful synthetic aid in organic chemistry