other products: pawls & ratchets, involute spline shafts, spline
TRANSCRIPT
579
Catalog Number of KHK Stock Gears
Material TypeS S45C RT Pawls and Ratchets
GC Gear Coupling V Involute Spline
Other Products
S V 20 - 200Total Length (200 mm) Major Diameter (20 mm) Type (Involute spline shafts)
Material (S45C)
Other Products
■ Feature Icons
The Catalog Number for KHK stock gears is based on the simple formula listed below. Please order KHK gears by specifying the Catalog Numbers. (Example)
RoHS Compliant Product
Stainless Product
Re-machinable Product
Resin Product
Finished ProductCopper Alloy Product
Heat Treated Product
Injection Molded Product
Ground GearBlack Oxide coated Product
Sp
urG
ears
Hel
ical
Gea
rsIn
tern
alG
ears
Rac
ksC
P R
acks
& P
inio
nsM
iter
Gea
rsB
evel
Gea
rsS
crew
Gea
rsW
orm
Gea
r P
air
Bev
elG
earb
oxes
Oth
erP
rod
ucts
SRT・SRTB・SRT-CPawls & Ratchets
P2.09 ~ 12.56 Page 580
SV・SVIInvolute Spline Shafts,
Spline Bushings
m1.667 Page 588
GC・GC-IGear Couplings
m2, 2.5 Page 584
QSGA・QSGMaster Gears (Spur Gear)
m0.4 ~ 1 Page 592
KHK products are available from MARYLAND METRICSP.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 email: [email protected] http://mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
580
Sp
urG
ears
Hel
ical
Gea
rsIn
tern
alG
ears
Rac
ksC
P R
acks
& P
inio
nsB
evel
Gea
rsS
crew
Gea
rsW
orm
Gea
r P
air
Bev
elG
earb
oxes
Oth
erP
rod
ucts
Mite
rG
ears
Characteristics of Pawls and Ratchets
● A simple structure used to restrict the rotational direction in one-way. ● The tips of pawls and the teeth of ratchets are induc-
tion hardened and therefore have superior durability.
SRT・SRTB・SRT-C
Ratchets・Pawls
■ Features
■ Points to observe during use
● No secondary operations can be performed on tooth areas including the bottom land (approx. 1 to 2 mm), due to gear teeth induction hardened.
● The pawls are designed to prevent reverse rotation. They are not suitable for use as driving ratchets or driving rotation.
● SRT2/ 3-C is manufactured using a lost wax casting method.● Regarding SRTB ratchets with hubs, please note the
direction of teeth, viewing from the hub side. KHK can produce ratchets which have the teeth pointed in the opposite direction as a custom order item.
Assembly example: KHK Stock Gears Sample Units
■ Bending strength of Ratchets
The allowable transmission forces Fb (N) of ratchets is the value calculated by the following formula.
Also, the SRT Ratchet's allowable torque T (N・m) for bending strength is calculated by the following formula.
T = Fb ・ rf
Where
Fb = σb・b・e2
6・ ・
1h
1SF
= Bending stress (Assumed 225.55MPa)= Face width E (mm)= Root length (mm)
= Depth of teeth (H) (mm)= Safety factor (Assumed 2)= Tooth root radius (m)
σb
be
hSF
rf
e = Depth of teeth (h) × tan 60- 360
No. of teeth (z)
→ rf = Outside dia. D ー(2・h)2000
581
Sp
urG
ears
Hel
ical
Gea
rsIn
tern
alG
ears
Rac
ksC
P R
acks
& P
inio
nsM
iter
Gea
rsB
evel
Gea
rsS
crew
Gea
rsW
orm
Gea
r P
air
Bev
elG
earb
oxes
Oth
erP
rod
ucts
Please see our web site for corrections on KHK Catalogs.
Ratchets & Pawls
Application
SRT Ratchet
SRT-C Pawls
Example: ratchets used for complete reverse prevention of worm gears *
SRT-C Pawls
SRT Ratchet
Motor
Example: SRT Ratchets used as a free-fall prevention mechanism of a lift device*
Lifti
ng D
evic
e
SRT・SRTB
* The illustration is a design example, not a design for machinery or a device in actual use.
582
Sp
urG
ears
Hel
ical
Gea
rsIn
tern
alG
ears
Rac
ksC
P R
acks
& P
inio
nsB
evel
Gea
rsS
crew
Gea
rsW
orm
Gea
r P
air
Bev
elG
earb
oxes
Oth
erP
rod
ucts
Mite
rG
ears
PawlsPitch 2.09~ 12.56SRT-C
I
E
A DH
J
T4
Specifications
Angle of teeth 60°
Material S45C
Heat treatment Induction hardened teeth
Tooth hardness 45~ 55HRC
Specifications
Angle of teeth 60°
Material S45C
Heat treatment Induction hardened teeth
Tooth hardness 42~ 55HRC
Catalog No. Shape K (L) M (N) PWeight
(kg)SRT2/3-CSRT1-CSRT2-CSRT3-CSRT4-C
T5
58
101213
(8)(10)(12.5)(15)(18)
3039556580
(38)(49)(67.5)(80)(98)
612152025
0.0200.0570.130.230.38
Catalog No. Pitch No. of teeth ShapeBore Hub dia. Outside dia. Face width Hub width Total length Depth of teeth Center distance Mounting distance
A B D E F G H I JSRT2/3-50SRT2/3-60SRT2/3-80SRT2/3-90SRT2/3-100
2.09
50608090
100
T4
1010121212
―
33.34053.36066.6
6 ― 6 1
33.8435.5139.4841.7344.11
15.671925.672932.33
SRT1-50SRT1-60SRT1-80SRT1-90SRT1-100
3.14
50608090
100
T4
1215151515
―
50608090
100
12 ― 12 1.6
45.4848.2454.7358.3562.16
23.428.438.443.448.4
SRT2-30SRT2-40SRT2-50SRT2-60
6.28
30405060
T4
15151515
―6080
100120
15 ― 15 3.1
61.2366.2372.2879.14
26.936.946.956.9
SRT3-30SRT3-40SRT3-50
9.42304050
T4152020
―90
120150
20 ― 20 576.3285.1595.52
405570
SRT4-30SRT4-40SRT4-50
12.56304050
T4202020
―120160200
25 ― 25 7.495.74
108.03122.37
52.672.692.6
SRTB2/3-50SRTB2/3-60SRTB2/3-80SRTB2/3-90SRTB2/3-100
2.09
50608090
100
T9
1010121212
2530354040
33.34053.36066.6
6 10 16 1
33.8435.5139.4841.7344.11
15.671925.672932.33
SRTB1-50SRTB1-60SRTB1-80SRTB1-90SRTB1-100
3.14
50608090
100
T9
1215151515
3540505050
50608090
100
12 12 24 1.6
45.4848.2454.7358.3562.16
23.428.438.443.448.4
SRTB2-30SRTB2-40SRTB2-50SRTB2-60
6.28
30405060
T9
15151515
50606065
6080
100120
15 14 29 3.1
61.2366.2372.2879.14
26.936.946.956.9
SRTB3-30SRTB3-40SRTB3-50
9.42304050
T9152020
758085
90120150
20 16 36 576.3285.1595.52
405570
SRTB4-30SRTB4-40SRTB4-50
12.56304050
T9202020
9090
100
120160200
25 18 43 7.495.74
108.03122.37
52.672.692.6
(N)
M
K
P
(L)60° FD
T5* FD has die-forged finish.
RatchetsPitch 2.09~ 12.56SRT・SRTB
① Due to gear teeth induction hardened, no secondary operations can be performed on tooth areas including the bottom land (approx. 1 to 2 mm). 〔Caution on Product Characteristics〕[Caution on Secondary Operations]
① Regarding SRTB ratchets with hubs, please note the direction of teeth, viewed from the hub side. KHK can produce ratchets that have teeth pointed in the opposite direction as a custom order item.
① The pawls are designed to prevent reverse rotation. They are not suitable for use as driving ratchets or driving rotation.
② SRT2/3-C is manufactured using a lost wax casting method.
〔Caution on Product Characteristics〕
583
Sp
urG
ears
Hel
ical
Gea
rsIn
tern
alG
ears
Rac
ksC
P R
acks
& P
inio
nsM
iter
Gea
rsB
evel
Gea
rsS
crew
Gea
rsW
orm
Gea
r P
air
Bev
elG
earb
oxes
Oth
erP
rod
ucts
Please see our web site for corrections on KHK Catalogs.
Ratchets
A B DI
J
H
E FG
T9
Allowable torque (N・m) Allowable torque (kgf・m) Weight
(kg)Catalog No.
Bending strength Bending strength
3.074.10 6.00 7.118.24
0.310.420.610.730.84
0.0350.0530.0960.120.15
SRT2/3-50SRT2/3-60SRT2/3-80SRT2/3-90SRT2/3-100
14.7 19.5 29.4 34.5 39.4
1.501.993.003.524.02
0.160.240.440.560.70
SRT1-50SRT1-60SRT1-80SRT1-90SRT1-100
29.0 49.2 70.8 94.3
2.965.027.229.61
0.280.530.851.24
SRT2-30SRT2-40SRT2-50SRT2-60
92.6 158 229
9.4416.123.3
0.861.582.54
SRT3-30SRT3-40SRT3-50
226 385 559
23.039.357.0
1.893.535.66
SRT4-30SRT4-40SRT4-50
3.07 4.10 6.00 7.11 8.24
0.310.420.610.730.84
0.0670.100.160.210.24
SRTB2/3-50SRTB2/3-60SRTB2/3-80SRTB2/3-90SRTB2/3-100
14.7 19.5 29.4 34.5 39.4
1.501.993.003.524.02
0.240.340.610.730.87
SRTB1-50SRTB1-60SRTB1-80SRTB1-90SRTB1-100
29.0 49.2 70.8 94.3
2.965.027.229.61
0.470.821.141.59
SRTB2-30SRTB2-40SRTB2-50SRTB2-60
92.6 158 229
9.4416.123.3
1.402.173.22
SRTB3-30SRTB3-40SRTB3-50
226 385 559
23.039.357.0
2.754.386.72
SRTB4-30SRTB4-40SRTB4-50
Pawls
SRT-C
SRT・SRTB
584
Sp
urG
ears
Hel
ical
Gea
rsIn
tern
alG
ears
Rac
ksC
P R
acks
& P
inio
nsB
evel
Gea
rsS
crew
Gea
rsW
orm
Gea
r P
air
Bev
elG
earb
oxes
Oth
erP
rod
ucts
Mite
rG
ears
Gear Couplings GC・GC-I
■ Features
■ Points to observe during use
● If you require one set of GC2-30, you will need one GC2-I (outer ring) and two GC2-30 (inner hubs). These components may
also be purchased separately. Therefore, please specify set or each when ordering.
● Inner hubs come with snap rings, S type products have prepared minimum bores and finished products come with set screws.
● Due to the gear teeth being induction hardened, no secondary operations can be performed on tooth areas including the bot-tom land (approx. 1 to 2 mm).
Characteristics of Gear Couplings
● There are many ways to couple shafts to transmit power. We have developed these standardized gear couplings of our own design. They are easier to connect or disconnect than chain couplings.
● The gear teeth of the inner hubs are crowned to allow for up to 5° of shaft angle offset.
● Due to induction hardened gear teeth, these couplings have ex-
cellent durability. All surfaces are plated (Unichromic plating).● The units are machined complete with keyways, set screw
holes and finished bores and are ready for immediate installa-tion. We also offer minimum bore models for users who want to perform their own secondary operations.
Inner hub
Outer ring
Inner hub
Snap Ring Groove
■ Bending Strength of Gear Couplings
Tolerance torques of the gear couplings are determined in accor-
dance with the shear strength of the keys. Allowable shear force of
keys F (N) are calculated from the following formula.
F = b・L・σ・
Additionally, allowable torques (T) of the inner hubs of the gear
coupling, versus shear force of keys, can be calculated from the
formula below.
T =
: Key Width (mm) → Keyway width of inner hubs of the GC Gear Coupling
: Key Length (mm) → Set at –2 mm from the total length of the inner hub
of the GC Gear Coupling
: Allowable Shear Force of keys → Set at 49MPa (5kgf/mm2)
: Safety Factor → Optionally set
: Bore size (mm) → Bore size A of the inner hub of the GC Gear Coupling
Caution: Safety Factor (S) must be set at a value between 1 to 3,
depending on the load types or the coupling displacement.
1s
F・d2000
b
L
σ
s
d
585
Sp
urG
ears
Hel
ical
Gea
rsIn
tern
alG
ears
Rac
ksC
P R
acks
& P
inio
nsM
iter
Gea
rsB
evel
Gea
rsS
crew
Gea
rsW
orm
Gea
r P
air
Bev
elG
earb
oxes
Oth
erP
rod
ucts
Please see our web site for corrections on KHK Catalogs.
Gear Couplings
Application
Turning table
CG Inner hubCG Outer ring
Motor
Specific usage for turning the work having no shafts or bores.
Assembly Example: KHK Stock Gears Sample Unit
Module 2 to 2.5
b
L
σ
s
d
GC
586
Sp
urG
ears
Hel
ical
Gea
rsIn
tern
alG
ears
Rac
ksC
P R
acks
& P
inio
nsB
evel
Gea
rsS
crew
Gea
rsW
orm
Gea
r P
air
Bev
elG
earb
oxes
Oth
erP
rod
ucts
Mite
rG
ears
Gear Couplings (Inner hub)GC
Gear Couplings (Outer ring)Module 2~ 2.5
Module 2~ 2.5
GC-I
G
BD C
FEK
AM
L
T2
E
A C D
T1
Specifications
Gear teeth Standard full depth
Pressure angle 20° (Crowing)
Material S45C
Heat treatment Tooth surface induction hardened
Tooth hardness 45~ 55HRC
Catalog No. Module No. of teeth ShapeBore Hub dia. Pitch dia. Outside dia. Face width Hub width Total length Set Screw
A B H7 C D E F G Size L
GC1-12SGC1-20GC1-22GC1-25
m2 25
T2TKTKTK
12202225
45 50 54 10 25 35
―M5M6M6
―101010
GC2-20SGC2-30GC2-32GC2-35GC2-40
m2 40
T2TKTKTK
2030323540
70 80 84 15 40 55
―M6
M10M10M10
―13131313
GC3-20SGC3-45GC3-50
m2.5 42T2TKTK
204550
90 105 110 20 45 65―
M10M10
―2020
Catalog No. Module No. of teeth ShapeInternal dia. Pitch dia. Outside dia. Face width Backlash
(mm)Weight
(kg)A C D E
GC1-IGC2-IGC3-I
m2m2m2.5
254042
T14676
100
5080
105
68105145
253648
0.40~0.600.331.032.96
① “S” denotes minimum bore products. Inner hubs come with snap rings and set screw.② The allowable torques in the table are obtained from the shear strength of keyways. The shear strength of keyway is assumed to be 49MPa(5kgf/mm2).① Due to the gear teeth being induction hardened, no secondary operations can be performed on tooth areas including the bottom land (approx. 1 to 2 mm).
〔Caution on Product Characteristics〕
① Due to the gear teeth being induction hardened, no secondary operations can be performed on tooth areas including the bottom land (approx. 1 to 2 mm).
[Caution on Secondary Operations]
[Caution on Secondary Operations]
Specifications
Gear teeth Standard full depth
Pressure angle 20°
Material S45C
Heat treatment Tooth surface induction hardened
Tooth hardness 45~ 55HRC
587
Sp
urG
ears
Hel
ical
Gea
rsIn
tern
alG
ears
Rac
ksC
P R
acks
& P
inio
nsM
iter
Gea
rsB
evel
Gea
rsS
crew
Gea
rsW
orm
Gea
r P
air
Bev
elG
earb
oxes
Oth
erP
rod
ucts
Please see our web site for corrections on KHK Catalogs.
Gear Couplings (Inner hub)
Gear Couplings (Outer ring)
G
BD C
FEK
AMJL
TK
C-Shaped Snap Ring Groove Total Width of Gear Coupling Keyway Allowable torque (N・m) Allowable torque (kgf・m) Backlash
(mm)Weight
(kg)Catalog No.
K L M N Width×Depth Bending strength Bending strength
23 1.95 42.5 73
―5 x 2.37 x 37 x 3
―68.7 98.1
137
―7.00
10.0 14.0
0.40~0.60
0.430.370.350.32
GC1-12SGC1-20GC1-22GC1-25
37 2.7 67 115
―7 x 3
10 x 3.310 x 3.310 x 3.3
―245 294 392 490
―25.0 30.040.050.0
0.40~0.60
1.661.481.421.361.23
GC2-20SGC2-30GC2-32GC2-35GC2-40
42 3.2 86.5 135―
12 x 3.312 x 3.3
―785 883
―80.090.0
0.40~0.603.432.742.56
GC3-20SGC3-45GC3-50
N
GC-I
GC
588
Sp
urG
ears
Hel
ical
Gea
rsIn
tern
alG
ears
Rac
ksC
P R
acks
& P
inio
nsB
evel
Gea
rsS
crew
Gea
rsW
orm
Gea
r P
air
Bev
elG
earb
oxes
Oth
erP
rod
ucts
Mite
rG
ears
Involute Spline Shafts & BushingsSV・SVI
■ Features
■ Points to observe during use
Characteristics of Gear Couplings
● SV and SVI series are made according to the automotive in-volute spline standard, JIS D 2001: 1959 (FLAT ROOT SIDE FIT, Backlash 0.06 to 0.15)
● Involute spline shafts and bushings are thermal refined to have
good abrasion-resistance.
● Spline bushings may be made in CAC (bronze) type material as a special custom order item.
■ The surface strength of SplineThe design concept of the spline surface strength is the same as that of a key. Here is the formula for the allowable transmission force (N) of spline.
F = η・z・hw・l・σ
And the formula of allowable torque T (N・m) of spline with re-spect to the surface strength.
T =
In designing a spline shafts, besides considering the surface strength, we should take into account the torsional and bending stresses of the spline.
Here
:Contact ratio of surface → 0.75 (assumed):Number of teeth → number of teeth (z) of spline from the table:Contact depth of tooth → 1.485:Contact length of spline → Total length (A) of involute spline bushing:Allowable surface stress of spline→19.61MPa (2kgf/mm2) (assumed):Contact diameter (mm) → Tip diameter of spline shaft D - hw
ηzhw
lσdw
F・dw
2000
● Be sure not to bend shafts or break teeth when perform-ing secondary operations on SV Involute Spline shafts.
● When using SVI Spline Bushings with sliding move-ment, lubrication is necessary on the sliding surface. To prevent scuffing, it is recommended to apply lubricating grease. If used in applications where oil contamination is not desirable, solid lubrication is recommended.
589
Sp
urG
ears
Hel
ical
Gea
rsIn
tern
alG
ears
Rac
ksC
P R
acks
& P
inio
nsM
iter
Gea
rsB
evel
Gea
rsS
crew
Gea
rsW
orm
Gea
r P
air
Bev
elG
earb
oxes
Oth
erP
rod
ucts
Please see our web site for corrections on KHK Catalogs.
Involute Spline Shafts & Bushings
Application
SV Involute Spline Shafts are used in shift transmission mechanisms
Slide Bar
SV Involute Spline Shaft
SV Involute Spline Bushing
Assembly Example: KHK Stock Gears Sample Unit
SV
590
Sp
urG
ears
Hel
ical
Gea
rsIn
tern
alG
ears
Rac
ksC
P R
acks
& P
inio
nsB
evel
Gea
rsS
crew
Gea
rsW
orm
Gea
r P
air
Bev
elG
earb
oxes
Oth
erP
rod
ucts
Mite
rG
ears
Involute Spline ShaftsModule 1.667SV
Involute Spline BushingsModule 1.667SVI
d D
GEF’ F
d
TA
E
A D
T1
Specifications
Gear teeth Stub teeth
Pressure angle 20°
Material S45C
Heat treatment Thermal refined
Tooth hardness 225~ 260HB
Specifications
Gear teeth Stub teeth
Pressure angle 20°
Material S45C
Heat treatment Thermal refined
Tooth hardness 225~ 260HB
Catalog No. Module No. of teeth ShapeOutside dia. Shaft dia. Face width Shaft length (R) Shaft length (L) Total length Backlash
(mm)Weight
(kg)D d E F F' G
SV17-170SV20-200SV25-250SV30-300
m1.667
8101316
TA TATBTB
16.6719.6724.6729.67
13152025
135165220270
2020――
15153030
170200250300
0.06~0.150.06~0.150.06~0.150.06~0.15
0.260.430.881.55
Catalog No. Module No. of teeth ShapeInternal dia. Outside dia. Face width Allowable torque (N・m) Allowable torque (kgf・m) Backlash
(mm)Weight
(kg)A D E Surface durability Surface durability
SVI17-40SVI20-45SVI25-55SVI30-65
m1.667
8101316
T1
13.716.721.726.7
40455565
25303845
33.2 59.6
125 222
3.38 6.08
12.8 22.6
0.06~0.150.06~0.150.06~0.150.06~0.15
0.210.310.570.93
① Be sure not to bend shafts or break teeth when performing secondary operations on SV Involute Spline shafts.[Caution on Secondary Operations]
+ 0 . 2 5+ 0 . 1 5
〔Caution on Product Characteristics〕 ① The allowable torques are calculated based on “The surface strength of Spline” . ② It is essential to apply lubricant on contact surface of the spline shaft and the hub. To prevent scuffing,
it is recommended to apply lubricating grease. If used in applications where oil contamination is not desir-able, solid lubrication is recommended.
591
Sp
urG
ears
Hel
ical
Gea
rsIn
tern
alG
ears
Rac
ksC
P R
acks
& P
inio
nsM
iter
Gea
rsB
evel
Gea
rsS
crew
Gea
rsW
orm
Gea
r P
air
Bev
elG
earb
oxes
Oth
erP
rod
ucts
Please see our web site for corrections on KHK Catalogs.
Involute Spline Bushings
GE F
Dd
TB
Catalog No. Module No. of teeth ShapeOutside dia. Shaft dia. Face width Shaft length (R) Shaft length (L) Total length Backlash
(mm)Weight
(kg)D d E F F' G
SV17-170SV20-200SV25-250SV30-300
m1.667
8101316
TA TATBTB
16.6719.6724.6729.67
13152025
135165220270
2020――
15153030
170200250300
0.06~0.150.06~0.150.06~0.150.06~0.15
0.260.430.881.55
SVI
Involute Spline Shafts
SV
592
Sp
urG
ears
Hel
ical
Gea
rsIn
tern
alG
ears
Rac
ksC
P R
acks
& P
inio
nsB
evel
Gea
rsS
crew
Gea
rsW
orm
Gea
r P
air
Bev
elG
earb
oxes
Oth
erP
rod
ucts
Mite
rG
ears
Catalog No. Module No. of teeth ShapeBore Hub dia. Pitch dia. Outside dia. Face width Hub width Total length
AH7 B C D E F GQSGA0.4QSGA0.45QSGA0.5QSGA0.55QSGA0.6
0.40.450.50.550.6
10088807266
S5 10 ―
40.039.640.039.639.6
40.840.541.040.740.8
10 ― 10QSGA0.65QSGA0.7QSGA0.75QSGA0.8QSGA0.9QSGA1.0
0.650.70.750.80.91
625854504440
40.340.640.540.039.640.0
41.642.042.041.641.442.0
Catalog No. Module No. of teeth ShapeBore Hub dia. Pitch dia. Outside dia. Face width Hub width Total length
AH7 B C D E F GQSG0.4QSG0.45QSG0.5QSG0.55QSG0.6
0.40.450.50.550.6
10088807266
S0 12.7 22.5
40.039.640.039.639.6
40.840.541.040.740.8
12.7 0.8 14.3QSG0.65QSG0.7QSG0.75QSG0.8QSG0.9QSG1.0
0.650.70.750.80.91
625854504440
40.340.640.540.039.640.0
41.642.042.041.641.442.0
Specifications
Precision grade JIS grade M00 (JIS B 1751)
Gear teeth Standard full depth
Pressure angle 20°
Material SK3
Heat treatment Vacuum Hardening
S5
A B C DB
E
G
G
G
G G
G G
S0
Master Gears (Spur Gear)Module 0.4~ 1QSGA・QSG
KHK Matter Gears are high precision gears used in meshing test machines. We proudly provide master gears with technologies ac-quired through our experience in manufacturing standard gears. * These gears are not for power transmission.* Mashing Pitch Inspection Data is included for these products.
High Precision Master Gears for meshing test machine.
Available Production
We accept orders even for gears with special specifica-tions, such us Helical Gears. Please feel free to contact us.
■ Module: 0.4 to 1■ Number or Teeth: can be designated as you request.■ Pressure Angles: Adaptable for various sizes, such
as 14.5°, 20° and 22.5°.
Master Gears are available by request
〔Caution on Product Characteristics〕 As custom order products, requires a lead-time for shipping (from the factory) 20 working-days after placing an order. Please allow additional shipping time to get to your local distributor.
〔Caution on Product Characteristics〕 As custom order products, requires a lead-time for shipping (from the factory) 20 working-days after placing an order. Please allow additional shipping time to get to your local distributor.