overview of microcalorimetry for material characterisation
TRANSCRIPT
![Page 1: Overview of Microcalorimetry for Material Characterisation](https://reader031.vdocument.in/reader031/viewer/2022021820/620e80973ce44519b75a5acb/html5/thumbnails/1.jpg)
Overview of Microcalorimetry for Material Characterisation –Looking at Battery Behaviour.
Malin Suurkuusk, Ph.D. TA Instruments
Sweden
![Page 2: Overview of Microcalorimetry for Material Characterisation](https://reader031.vdocument.in/reader031/viewer/2022021820/620e80973ce44519b75a5acb/html5/thumbnails/2.jpg)
An isothermal microcalorimeter measures heat produced or consumed during a physical process or a chemical reaction in terms of heat flow at a constant temperature with microwatt sensitivity or better.
![Page 3: Overview of Microcalorimetry for Material Characterisation](https://reader031.vdocument.in/reader031/viewer/2022021820/620e80973ce44519b75a5acb/html5/thumbnails/3.jpg)
Isothermal calorimetry – a universal technique
Amorphicityassessment
Microorganismdetection
Efficiency ofstabilizers
Material compatibility
ITC
Propellant safetyand stability
Polymorphism
Battery efficiency
Stability
![Page 4: Overview of Microcalorimetry for Material Characterisation](https://reader031.vdocument.in/reader031/viewer/2022021820/620e80973ce44519b75a5acb/html5/thumbnails/4.jpg)
Isothermal calorimetry in material science
Applications include:
− Stability
− Compatibility
− Curing
− Reaction kinetics
− Safety assessments
− Hydration and swelling
− Absorption
− Batteries
− Gas producing reactions
![Page 5: Overview of Microcalorimetry for Material Characterisation](https://reader031.vdocument.in/reader031/viewer/2022021820/620e80973ce44519b75a5acb/html5/thumbnails/5.jpg)
TAM – Thermal Activity Monitor
4 – 150 °C
Flexible one system multiple possibilities
Modular add functionality by choice of calorimeters, sample handling systems and accessories
Sample sizesfrom less than 1 mL up to 125 mL
4 channel version highest flexibility and sensitivity
48 channel versionhighest throughput
5 – 90 °C
Flexible interchangeable calorimeter blocks depending on sample
Sample sizesfrom 20 mL up to 125 mL
3 channel version Large samples up to 125 mL
8 channel version• Samples up to 20 mL• Possibility to add and mix in situ
Sensitive More Sensitive
µW nW
TAM IV& TAM IV 48
mW
TAM Air
![Page 6: Overview of Microcalorimetry for Material Characterisation](https://reader031.vdocument.in/reader031/viewer/2022021820/620e80973ce44519b75a5acb/html5/thumbnails/6.jpg)
TAM IV – a flexible multichannel microcalorimetric system
▪ 1 – 48 individual & independent calorimeters
▪ nW - mW sensitivity depending on calorimeter
▪ <1 ml to 20 ml and 125 ml sample sizes
▪ Sample handling system with possibilities to
− Add and mix
− Perfuse gas or liquid over a sample
− Control and continously or stepwise change RH or gas/liquid composition
− Measure pressure changes
− Dissolve solid samples
− Add additional probes for increased specificity
▪ One system – multiple possibilities
![Page 7: Overview of Microcalorimetry for Material Characterisation](https://reader031.vdocument.in/reader031/viewer/2022021820/620e80973ce44519b75a5acb/html5/thumbnails/7.jpg)
TAM IV – A Modular Microcalorimeter System
▪ The microcalorimeter system base is the TAM IV thermostat.
▪ Functionality and measuring capacity is obtained by adding:
− Calorimeters
− Sample handling systems (ampoules)
− Auxiliary equipment
![Page 8: Overview of Microcalorimetry for Material Characterisation](https://reader031.vdocument.in/reader031/viewer/2022021820/620e80973ce44519b75a5acb/html5/thumbnails/8.jpg)
Why use TAM for battery testing?
▪ Only method that directly measures the occurrence of non-current producing reactions under load
▪ Very sensitive method to assess self-discharge, sometimes the only method
▪ Non-destructive
▪ Simple
▪ Continuous
![Page 9: Overview of Microcalorimetry for Material Characterisation](https://reader031.vdocument.in/reader031/viewer/2022021820/620e80973ce44519b75a5acb/html5/thumbnails/9.jpg)
Measured battery power
reactionsparasiticR
E
R
E
dt
dq
batteryresistor
22
++=
reactionsparasiticR
E
dt
dq
battery
2
+=
Battery under load
Self-discharging battery
Parasitic reactions are material compatibility issues, side reactions not part of the battery chemistry
![Page 10: Overview of Microcalorimetry for Material Characterisation](https://reader031.vdocument.in/reader031/viewer/2022021820/620e80973ce44519b75a5acb/html5/thumbnails/10.jpg)
Battery applications
▪ Stability and shelf life
− Self discharge will show heat production in an open circuit
▪ Life cycle
− Variance of thermal performance during charge/discharge cycles
− Evaluation of number of charge cycles possible
▪ Efficiency
− How much of the total power generated is available for the external device?
− Internal resistance
− Depends on temperature, current draw, age, charge cycles etc.
![Page 11: Overview of Microcalorimetry for Material Characterisation](https://reader031.vdocument.in/reader031/viewer/2022021820/620e80973ce44519b75a5acb/html5/thumbnails/11.jpg)
Battery applications cont.d
▪ Performance
− Depends on the discharge conditions such as the magnitude of the current, the allowable terminal voltage of the battery, temperature and other factors
▪ Quality control
− For critical applications, e.g. pacemaker batteries, to make sure there are no unwanted processes and internal short circuits
▪ Development
− New type of electrochemical components
− Compatibility
− Evaluation of individual battery components
![Page 12: Overview of Microcalorimetry for Material Characterisation](https://reader031.vdocument.in/reader031/viewer/2022021820/620e80973ce44519b75a5acb/html5/thumbnails/12.jpg)
Battery tests can be performed as function of
• Temperature
• Size & shape of battery
• Chemistry
• Current draw
• Age
• State of charge
![Page 13: Overview of Microcalorimetry for Material Characterisation](https://reader031.vdocument.in/reader031/viewer/2022021820/620e80973ce44519b75a5acb/html5/thumbnails/13.jpg)
Calorimeters for battery testing
➢Macrocalorimeter
− Volume: 210 mL Sample size up to 61.2 mm diameter and 72 mm high
➢20 ml Micro or Mini/Multicalorimeter
− For smaller batteries and where higher sensitivity is needed also the 20 ml calorimeters can be used.
➢Battery measurements accessories
− Insert for standard batteries
− Lifters with wiring capabilities
![Page 14: Overview of Microcalorimetry for Material Characterisation](https://reader031.vdocument.in/reader031/viewer/2022021820/620e80973ce44519b75a5acb/html5/thumbnails/14.jpg)
Battery fixtures
Purpose of fixture
− To optimise the thermal contact between the battery and the heat flow detector
− To make sure the position of the battery in the calorimeter is reproducible
− To facilitate the insertion of the battery into the calorimeter
− To avoid short-circuiting the battery and facilitate connections to the battery for load measurements
− Available for C- and D- cell batteries as well as 18650 batteries
![Page 15: Overview of Microcalorimetry for Material Characterisation](https://reader031.vdocument.in/reader031/viewer/2022021820/620e80973ce44519b75a5acb/html5/thumbnails/15.jpg)
Open circuit discharge
![Page 16: Overview of Microcalorimetry for Material Characterisation](https://reader031.vdocument.in/reader031/viewer/2022021820/620e80973ce44519b75a5acb/html5/thumbnails/16.jpg)
Example on two different batteries and calibrations
![Page 17: Overview of Microcalorimetry for Material Characterisation](https://reader031.vdocument.in/reader031/viewer/2022021820/620e80973ce44519b75a5acb/html5/thumbnails/17.jpg)
Self dischargeDamaged batteries
![Page 18: Overview of Microcalorimetry for Material Characterisation](https://reader031.vdocument.in/reader031/viewer/2022021820/620e80973ce44519b75a5acb/html5/thumbnails/18.jpg)
Tests for short-circuited batteries
▪ Internally short-circuited battery
▪ Pacemaker batteries
− Tested with a well defined circuit in the calorimeter
Good batteries < 20 µWBad batteries > 70 µW
Open circuitvoltage (V)
Load voltage (V)
Heat output (µW)
Good cell 2.8 2.75 25
Shorted cell < 2.5 < 2.0 150 - 200
![Page 19: Overview of Microcalorimetry for Material Characterisation](https://reader031.vdocument.in/reader031/viewer/2022021820/620e80973ce44519b75a5acb/html5/thumbnails/19.jpg)
Charge - Discharge
![Page 20: Overview of Microcalorimetry for Material Characterisation](https://reader031.vdocument.in/reader031/viewer/2022021820/620e80973ce44519b75a5acb/html5/thumbnails/20.jpg)
Heat flow and voltage measurements
![Page 21: Overview of Microcalorimetry for Material Characterisation](https://reader031.vdocument.in/reader031/viewer/2022021820/620e80973ce44519b75a5acb/html5/thumbnails/21.jpg)
Battery under load
![Page 22: Overview of Microcalorimetry for Material Characterisation](https://reader031.vdocument.in/reader031/viewer/2022021820/620e80973ce44519b75a5acb/html5/thumbnails/22.jpg)
Battery with load in the calorimeter
![Page 23: Overview of Microcalorimetry for Material Characterisation](https://reader031.vdocument.in/reader031/viewer/2022021820/620e80973ce44519b75a5acb/html5/thumbnails/23.jpg)
Experimental setup
A set 18650 batteries had metal tabs spot-welded to each terminal of each battery.
Two wires were soldered to each tab – a black set to the negative side and a red set to the positive side.
The ends were then covered with capton tape to electrically insulate the terminals
The batteries were placed inside adapters and the wires through the holes in the shunts, then the adapters were placed inside the TAM.
A battery tester was connected to one set of wires, while the other set were connected to a voltage measurement device.
![Page 24: Overview of Microcalorimetry for Material Characterisation](https://reader031.vdocument.in/reader031/viewer/2022021820/620e80973ce44519b75a5acb/html5/thumbnails/24.jpg)
Battery under load
![Page 25: Overview of Microcalorimetry for Material Characterisation](https://reader031.vdocument.in/reader031/viewer/2022021820/620e80973ce44519b75a5acb/html5/thumbnails/25.jpg)
Experimental program
![Page 26: Overview of Microcalorimetry for Material Characterisation](https://reader031.vdocument.in/reader031/viewer/2022021820/620e80973ce44519b75a5acb/html5/thumbnails/26.jpg)
Results
![Page 27: Overview of Microcalorimetry for Material Characterisation](https://reader031.vdocument.in/reader031/viewer/2022021820/620e80973ce44519b75a5acb/html5/thumbnails/27.jpg)
Button cell battery- Li R2032 - Discharge
Heat
flow
(m
W)
Vo
ltag
e [V
]
Vol tage, ud:V
Sep 28 8:00 9:00 10:00 11:00 12:00 13:00
0
5
10
15
0
1
2
3
4
1
1
2
3
2
Δt: 5-6min
![Page 28: Overview of Microcalorimetry for Material Characterisation](https://reader031.vdocument.in/reader031/viewer/2022021820/620e80973ce44519b75a5acb/html5/thumbnails/28.jpg)
Stability and Compatibility
![Page 29: Overview of Microcalorimetry for Material Characterisation](https://reader031.vdocument.in/reader031/viewer/2022021820/620e80973ce44519b75a5acb/html5/thumbnails/29.jpg)
Battery individual component stability measurements
![Page 30: Overview of Microcalorimetry for Material Characterisation](https://reader031.vdocument.in/reader031/viewer/2022021820/620e80973ce44519b75a5acb/html5/thumbnails/30.jpg)
Battery component compatibility testing
![Page 31: Overview of Microcalorimetry for Material Characterisation](https://reader031.vdocument.in/reader031/viewer/2022021820/620e80973ce44519b75a5acb/html5/thumbnails/31.jpg)
Compatibility Between Wax and Mineral Wool
Data provided by Svensson, Bodycote Materials AB, Sweden (2003)
![Page 32: Overview of Microcalorimetry for Material Characterisation](https://reader031.vdocument.in/reader031/viewer/2022021820/620e80973ce44519b75a5acb/html5/thumbnails/32.jpg)
Summary of using TAM for battery testing
▪ Only method that directly measures the occurrence of non-current producing reactions under load
▪ Very sensitive method to assess self-discharge, sometimes the only method
▪ Non-destructive
▪ Simple
▪ Continuous
In addition to whole device testing individual
component stability and compatibility can be
evaluated
![Page 33: Overview of Microcalorimetry for Material Characterisation](https://reader031.vdocument.in/reader031/viewer/2022021820/620e80973ce44519b75a5acb/html5/thumbnails/33.jpg)
Thanks!