owg000207 msoftx3000 number analysis configuration issue2.0
TRANSCRIPT
Huawei Confidential. All Rights Reserved
OWG000207 MSOFTX3000Number Analysis Configuration
ISSUE 2.0
2 Internal Use
This course gives a general
introduction to related concepts,
procedures of number analysis,
and examples.
3 Internal Use
Upon completion of this course, the trainees should be able to:
Understand concepts of number analysis
Master processes of number analysis
Master steps of number analysis
Master basic commands for number analysis
Course ObjectivesCourse Objectives
4 Internal Use
MSOFTX3000 OM-Data Configuration Co
nfiguring Number Analysis Data
DocumentationDocumentation
5 Internal Use
Chapter 1 Chapter 1 Basic concept
Chapter 2Chapter 2 Procedures
Chapter 3Chapter 3 Data configuration
Chapter 4Chapter 4 Examples
6 Internal Use
Basic ConceptsBasic Concepts
Call Source and Call Source Code: Call source refers to a subscriber or incoming trunk originating a call.
Each call source has an integral number: call source code.
For the MSOFTX3000, incoming calls may come from A interface, Iu
interface and incoming trunk.
Dialed Number Set : It is a set of dialed numbers or prefixes. It is associated with the call
ed number prefix.
Relationship between Call Source and Dialed Number Set: One number initial set may relate to multiple call sources, while one
call source should relate only to one number initial set.
7 Internal Use
Call Prefix: Call prefix is a number segment cut from a called
number; the cut starts with the first digit of the called
number.
Adopts the rule of the longest number matching
Basic ConceptsBasic Concepts
8 Internal Use
Route Selection Source Code: The route selection source code specifies different outgoing routing strategies of
different call sources. The route selection source code relates to the call source.
Route Selection Code : A route selection code indicates a routing strategy for calls with a certain prefix.
The route selection source code is related to the caller.
The route selection code is related to the called.
Basic ConceptsBasic Concepts
9 Internal Use
Failure Source Code : The failure source code numbers different processing methods for the connection
failure of calls from different call sources.
Different causes may relate to different connection failure processing methods,
such as route reselection, signal tone playing, or triggering NCSIDP4.
Basic ConceptsBasic Concepts
10 Internal Use
Secondary Number Analysis: If a number is changed during the number analysis process, the secondary numb
er analysis is needed in order to determine the outgoing route. The secondary nu
mber analysis can be done in the following two ways:
MSISDN, the MSOFTX3000 will get the route information of the callee from HLR.
If HLR returns a roaming number or forwarded-to number, the MSOFTX3000 will
conduct a second number analysis (that is, it will analyze the call prefix again acc
ording to the number that HLR returned) to find the outgoing route.
A called number is changed through the prefix processing. If the processing type
is "reanalysis" (conduct number analysis again), the MSOFTX3000 will also carry
out the secondary number analysis, that is, to analyze the changed number with t
he call prefix analysis table to find the outgoing route.
Basic ConceptsBasic Concepts
11 Internal Use
Number Change : Insert Delete Change
Number can be changed in many places : Incoming pre-processing Internal number analysis Outgoing pre-processing Etc.
Almost all kinds of number can be changed : Calling Called FWD Bill MSRN etc.
Basic ConceptsBasic Concepts
12 Internal Use
Call authority check : Certain class of subscribers is only allowed to dial specified numbers.
Some subscribers are not allowed to dial certain numbers.
Play announcements to the caller when the call is forwarded in the local office.
Service Check:Check whether a caller is authorized to make calls.
You can set the service check type, check mode, and
conversation duration restriction.
Basic ConceptsBasic Concepts
13 Internal Use
Wildcards:The wildcards that are often used in number analysis are:
eeeeeeee: Stands for any call prefix.
65534: Stands for all call sources
Basic ConceptsBasic Concepts
14 Internal Use
Basic ConceptsBasic Concepts
EARLY ACM:
On receiving Initial Address Message (IAM) from the previous office, the
local office confirms that the called number is received completely and
promptly sends ACM back to the previous office before the callee respo
nds.
15 Internal Use
Basic ConceptsBasic Concepts
Forwarded-to Number : When the local office is the
terminating office, if a call is forwarded at the local office,
the number to which the call is forwarded is called the
forwarded-to number at the local office.
Original Called Number : When a call is forwarded for
once or times, the first called number is called the
original called number.
Connected Number : When a call is originated from the
local office (originating office) and is forwarded from
terminating office B to office C, the final called number
sent by terminating office B to the local office is the
connected number.
16 Internal Use
Chapter 1 Chapter 1 Basic concept
Chapter 2Chapter 2 Procedures
Chapter 3Chapter 3 Data configuration
Chapter 4Chapter 4 Examples
17 Internal Use
Procedures of Number AnalysisProcedures of Number Analysis
Incoming called No. change
Called No change from local MS
FWD No change
MSRN change
Common No processing
Paging to called
SRI
Change for outgoing No.
18 Internal Use
Outgoing to other offices.PSTN, MSRN belong to others, MSISDN of others PLMN
SRI Req. to HLRMSISDN in own PLMN
Paging to called partLocal MSRN
ProcessingCalled Part
Procedures of Number AnalysisProcedures of Number Analysis
19 Internal Use
Chapter 2 ProceduresSection 1 Incoming Number PreprocessingSection 2 Internal Number AnalysisSection 3 Outgoing Number PreprocessingSection 4 Others Number ProcessingSection 5 Related flows
20 Internal Use
Incoming Number Preprocessing Incoming Number Preprocessing
Normalize the format of number: Called/Calling Number
MSRN in SRI Ack
FWD Number
Number in IN flow
receive-number delay: Ensure the completeness of numbers entered
21 Internal Use
Call from local Sub.
LAIGCI
Incoming Number Preprocessing Incoming Number Preprocessing
Call source
Incoming number pretreatment table
Number changeIncoming calling number associated process table
Incoming original called number correlation processing table
22 Internal Use
Call from Trunk
Trunk group
Call source
Incoming number pretreatment table
Number changeIncoming calling number associated process table
Incoming original called number correlation processing table
Incoming Number Preprocessing Incoming Number Preprocessing
23 Internal Use
Chapter 2 ProceduresSection 1 Incoming Number PreprocessingSection 2 Internal Number AnalysisSection 3 Outgoing Number PreprocessingSection 4 Others Number ProcessingSection 5 Related flows
24 Internal Use
Internal Number AnalysisInternal Number Analysis
Response to analyze number and choice route: Key step for number analysis
Key step for routing
25 Internal Use
Internal Number AnalysisInternal Number Analysis
Number prefix
Call authority check
Service check
Calling number analysis
Calling number attribute analysis
Supplementary Signaling
Number initial processing
Route Analysis
Enhanced route processing
Failure processing
Number change
Outgoing Number Preprocessing
Outgoing Call
26 Internal Use
Chapter 2 ProceduresSection 1 Incoming Number PreprocessingSection 2 Internal Number AnalysisSection 3 Outgoing Number PreprocessingSection 4 Others Number ProcessingSection 5 Related flows
27 Internal Use
Outgoing Number PreprocessingOutgoing Number Preprocessing
Customize the format of number: Called/Calling Number
FWD Number
Number in IN flow
28 Internal Use
Outgoing number preprocessing
Outgoing calling number correlation processing
Outgoing original called numbers correlation processing
Calling / Called / Original Called Number
Outgoing Number PreprocessingOutgoing Number Preprocessing
29 Internal Use
Trunk Group Bearer
Trunk Group Bearer Index
NumberChange Table
Changed NumberIn Signaling
Number Change Index
Index Number
Outgoing Number PreprocessingOutgoing Number Preprocessing
30 Internal Use
Chapter 2 ProceduresSection 1 Incoming Number PreprocessingSection 2 Internal Number AnalysisSection 3 Outgoing Number PreprocessingSection 4 Others Number ProcessingSection 5 Related flows
31 Internal Use
Others Number ProcessingOthers Number Processing
Caller identification processing: For CLIP service\
Auxiliary number processing: For CoLP service
MAP interface number processing; Customize MSISDN number in SRI Req
Bill number processing: Change number in CDR
32 Internal Use
Chapter 2 ProceduresSection 1 Incoming Number PreprocessingSection 2 Internal Number AnalysisSection 3 Outgoing Number PreprocessingSection 4 Others Number ProcessingSection 5 Related flows
33 Internal Use
Result after Number Analysis: PSTN
MSISDN
MSRN (Local Office)
MSRN (Others Office)
Related processing flows are different based on different types of
number
Related flowsRelated flows
34 Internal Use
Related flows——PSTNRelated flows——PSTN
PSTN
Number prefix table
Route Select Code
Call source
Route Select Source Code
Route analysis table
(CIC, for IAM) DPC
Send out IAM
Call source table
Route table
Sub route table
Trunk group table
Trunk circuit Office table
MTP Route
MTP DSP
MTP Link-set
MTP Links
35 Internal Use
Related flows——MSISDNRelated flows——MSISDN
MSISDN
Number prefix
MSISDN / RSC: 65535
GT translate (MSISDN)
DPC
Send out SRI REQ
SCCP GT
MTP Route
MTP DSP
MTP Link-set
MTP Links
36 Internal Use
Related flows——MSRN (Local Office)Related flows——MSRN (Local Office)
MSRN (Local)
Number prefix
MSRN / RSC: 65535
LAI
BSC DPC
DPC
Query VLR
LAI/GCI table
BSC table
Paging Response
CIC for Assignment
BSC Table
AIE Trunk group
AIE Trunk Circuit
Send out Paging
MTP Route
MTP DSP
MTP Link-set
MTP Links
37 Internal Use
Related flows——MSRN (Others office)Related flows——MSRN (Others office)
MSRN (Other office)
Number prefix
Call source
Call source table
MSRN / Route Select Code Route Select Source Code
Route analysis table
(CIC, for IAM) DPC
Send out IAM
Route table
Sub route table
Trunk group table
Trunk circuit Office table
MTP Route
MTP DSP
MTP Link-set
MTP Links
38 Internal Use
Chapter 1 Chapter 1 Basic concept
Chapter 2Chapter 2 Procedures
Chapter 3Chapter 3 Data configuration
Chapter 4Chapter 4 Examples
39 Internal Use
Configuring Preset Data Before Number Configuring Preset Data Before Number Analysis Analysis
Configuring call source: ADD CALLSRC
Configuring number change: ADD DNC (32 types)
40 Internal Use
Configuring Incoming Call Number Configuring Incoming Call Number Preprocessing DataPreprocessing Data
Configuring Incoming Calling Number Associated Process Data ADD INCLRIDX
Configuring Correlation Processing Data of Incoming Original Called Number ADD INORICLDIDX
Configuring Incoming Number Pretreatment ADD INNUMPREPRO
41 Internal Use
Configuring Number Analysis DataConfiguring Number Analysis Data
Call prefix: ADD CNACLD
Enhanced route processing: ADD SUPERRT
Call authority check: ADD CALLPRICHK
Service check: ADD SRVCHK
Supplementary Signaling: ADD AUSSIG
Calling number analysis: ADD CNACLR
Calling number attribute analysis: ADD CLICRTANA
Number initial processing: ADD PFXPRO
Failure processing: ADD CFPRO
42 Internal Use
Configuring Outgoing Number Configuring Outgoing Number Preprocessing DataPreprocessing Data
Configuring Outgoing Calling Number Correlation Processing Data ADD OUTCLRIDX
Configuring Outgoing Original Called Number Correlation Processing Data ADD OUTORICLDIDX
Configuring Outgoing Number Preprocessing Data ADD OUTNUMPREPRO
43 Internal Use
Configuring Trunk Bearer DataConfiguring Trunk Bearer Data
Trunk group bearer: ADD TGLD
Trunk group bearer index: ADD TGLDIDX
44 Internal Use
Configuring Others Number Processing DataConfiguring Others Number Processing Data
Configuring CLIP Called Correlation Processing Data: ADD CLCRPRO
Configuring CLIP Processing Data: ADD CLIPRO
Configuring Auxiliary Number Processing Data: ADD AIDNUMPRO
Configuring MAP Interface Number Processing Data: ADD MAPIFNP
Configure Bill Processing Information: ADD BILLPROC
Configuring Bill Control Data: ADD BILLCTRL
45 Internal Use
Notes:Notes:
Service Attribute, follow rules: National number: National toll.
International number: International toll .
Local MSISDN: PLMN Local MSCs.
National MSISDN: PLMN National Toll MSC .
Home MSRN: PLMN Home MSC .
Local MSRN: PLMN Local MSCs .
National MSRN: PLMN National Toll MSC .
Voice mail number: PLMN Local MSCs .
Service call: Local .
Entertainment: Local .
Information number: Local .
Local PSTN: Local
46 Internal Use
Notes:Notes:
Route Selection Code: TUP/ISUP call: Specify right codeInclude: PSTN/ MSRN/HOW others office / MSIS
DN other PLMN
MSISDN/ Local MSRN/HON: 65535
For international MSRN: Number prefix: 0
Number prefix set: 9
Number type: PSTN.
47 Internal Use
QuestionsQuestions
What’s different between calling number analysis and calling number
attribute analysis?
What’s different between calling number analysis and number initial special
processing?
48 Internal Use
AnswerAnswer
1 calling number analysis: based on calling number;
calling number attribute analysis: based on attribute
calling number attribute analysis is only used when
calling number analysis was not used;
2 calling number analysis: based on calling number;
number initial special processing: based on called
number.
49 Internal Use
Chapter 1 Chapter 1 Basic concept
Chapter 2Chapter 2 Procedures
Chapter 3Chapter 3 Data configuration
Chapter 4Chapter 4 Examples
50 Internal Use
ExamplesExamples
Example 1: Play announcement when call failure
Example 2: Play announcement for 117 (Time announcement)
Example 3: MS calls PSTN
Example 4: PSTN calls MS
51 Internal Use
SummarySummary
After finish this course: Trainees can master functions and steps
for number analysis.
Also can be familiar with commands and
relations between them..
SummarySummary