owg008201 bam introduction issue2.1

www.huawei.com

Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.

BAM Introduction


Objectives

Upon completion of this course, you will be able to:

Grasp the structure of BAM software

Perform the process of BAM installation and Backup

Grasp data configuration operations in BAM


References

MSOFTX3000 Architecture and Principle -

Maintenance Management Subsystem


Contents

1. BAM Software Structure

2. BAM Software Management

3. BAM Data Configuration Related Topic


HOST WS

WS

LAN1

BAM

LAN2

BAM server/client work mode


BAM Server/Client Work Mode

Fan Monitor

0# Subrack

1# Subrack

2# Subrack

9# Subrack

RS232

Fan MonitorRS232

Fan MonitorRS232

Fan MonitorRS232

RS422

0# LanSwitch

1# LanSwitch

BAM

0#IGWB

1#IGWB

NC1 NC0

NC1 NC0

NC1 NC0NC2

HUB

WS0 WSnWS1

ROUTER

OptionalRemote Maintenance Device Interface

MODEM

FE× 2

FE×1

GE

Remote Maintenance Device


BAM Reliability and Flexibility Design Reliability

BAM’s hard disk configuration adopts RAID 1 with a full mirror of data in BAM.

BAM Emergency Work Station will take place of BAM when BAM has problem. It backups data every 4 hours.

Flexibility BAM can be installed in IBM or HP server.


BAM Software Structure BAM Application

Monitor Service: BAM Service

Process Management : BAM Manager

Other Processes

Windows 2000 Server

BAM server

SQL Server 2000

application layer

Operation System Layer

HP/IBM Server hardware platform


BAM Processes Introduction


BAM Manager


BAM Service Process


Smirror Process


Questions

What’s the function of BAM process?


Contents





Contents

2 BAM Software Management

2.1 BAM Software Installation

2.2 BAM database Backup & Restore

2.3 BAM Server Gateway Tool


BAM Software Installation before Delivery

Installing SQL Server 2000

Installing SQL Server 2000 Service Pack 3

Installing BAM server software

End

Installing driver for network adapter

Setting hard disk partitions

Setting IP address of network adapter

Installing Windows 2000 Server

Setting hard disk in RAID 1 mode

Start

Setting automatic login to Windows 2000 Server


On-site Installation of BAM Software

Start

Check whether the operating system and database run

normally

Modify the administrator password of SQL Server

2000

Modify IP addresses of network adapters

Install the BAM server software

End

Modify the computer name

No

Yes

Perform factory installation

Modify the administrator password of Windows 2000

ServerModify factory-default settings

Set automatic login to Windows 2000 server


On-site Installation of BAM Software Check BAM Hard Disk in RAID 1 Mode

Check Hard Disk Partitions

Set IP Address of Network Adapter

Modify Computer Name and Workgroup

Modify System Administrator Password of Windows 2000

Server

Modify System Administrator Password of SQL Server 2000

Set language

Set Automatic Login to Windows 2000 Server


Integrated Lights-Out press [F8] to configure

Press <F8> to run the Option ROM Configuration for Arrays UtilityPress <ESC> to skip configuration and continue

Setting BAM Hard Disk in RAID 1 Mode

The following information means setting correct

Logical Drive # 1, RAID 1, 33.9 GB, OK


Check Partitions and Capability of Hard Disk Partition capacity of logical drive is assigned with the following :

Drive C: 6 GB, install operating system (Windows 2000 Server)

and database management software (SQL Server 2000).

Drive D: 15 GB, install BAM server software and storing the

system databases.

Drive E: 3 GB, store the log files of the databases.

Drive F: remain space (about 10.3 GB), mainly used for

backing up system databases, and registry information.

Attention: The File system format should be NTFS.


BAM Software Installation Directory

File path DescriptionD:\Data Storing all files to be loaded to the hostD:\Mssql Storing system database files, including sub-foldersD:\Mssql\Data Storing system database filesE:\Mssql Storing database log files, including sub-foldersE:\Mssql\Data Storing database log files

F:\MSOFTX3000It is the default system backup folder which stores BAM registry and database files.

E:\Mssql\Data\Alarm_Log.LDF Log file corresponding to Alarm database

E:\Mssql\Data\Bam_Log.LDF Log file corresponding to Bam databaseE:\Mssql\Data\BillData_Log.LDF Log file corresponding to BillData database

E:\Mssql\Data\Stats_Log.LDF Log file corresponding to Stats databaseF:\MSOFTX3000\BamYYYYMMDD.dat

BAM database backup file generated on MM (month) DD (day) YYYY (year)

F:\MSOFTX3000\InitialDbBkp.dat

It is the initial BAM database file. By replacing the present file with this file, BAM database state is restored to initial state.


Set Network Adaptor of BAM

IBM server chassis back

Network adapter 2

Network adapter 3

Network adapter 4

To LAN Switch 0

172.20.200.0 / 255.255.0.0

To LAN Switch 1

172.30.200.0 / 255.255.0.0

To external network

Customized IP address

Network adapter 1


Set Network Adaptor of Emergency Work Station

PC chassis rear

Network adapter 1

172.20.200.0 / 255.255.0.0Connected to LAN Switch 0 in

case of emergency172.30.200.0 / 255.255.0.0

Customized IP address To external network

Standby

Network adapter 2

Network adapter 3

Network adapter 4Connected to LAN Switch 1 in

case of emergency


Modify System Administrator Password of Windows 2000 Server


Modify System Administrator Password of SQL Server 2000


Set Automatic Login


Set Software Backup Directory


Contents






BAM Automatic Backup

System will automatically backup BAM Database and Register Table in F:\MSOFTX3000\ at 4:30 AM everyday

BAM database : BamYYYYMMDD.dat saving data of latest seven days( exce

pt Sunday) as well as the data of latest 4 Sunday BamMonthBak.dat saving the data of the first day of each m

onth Register Table BamReg.bak saving the latest Register Table


Manual Backup(1)

Use the command BKP DB: Backup BAM database and register to the directory F ： \MS

OFTX3000

This is more common than using SQL Server to Backup.


Manual Backup(2)


Manual Backup(3)


Manual Backup(4)


BAM Database Restore(1) Before restoring BAM, you should stop BAM Service and Smirror Service in

the Services Windows , then stop and close Bam Manager.


BAM Database Restore(2)


BAM Database Restore(3)


Contents






Set BAM Server Gateway Tool(1)

BAM Server Tool is used to connect alarm box


Set BAM Server Gateway Tool(2)


Contents





Data Management Principle

LMT Data Configuration

FMT

LONProgram Writeable

Data Writeable

HOST

SQL server DB

D:\DATA


Commands Usage

MML Commands Usage

Command Description

ADD To add data

MOD To modify data

RMV To remove data

LST To list BAM data

DSPTo display host data, state of equipment, or resource consumption

SET To set data or state

LOF Offline

LON Online


Configuration Steps When deploying a new site, configurations need ：

Set data offline Prepare online setting data Reload data

Command Description

Set data offline

LOF To set data offline

SET CWSON: SWT=OFF To disable the alarm switch

SET FMT: STS=OFFTo disable the format conversion switch

……. To configure data

Prepare online setting data

LON To set data online

SET CWSON: SWT=ON To enable the alarm switch

SET FMT: STS=ONTo enable the format conversion switch

FMT To format data

Reload data

Power off, power on, and start loading

To reload data


Mandatory and Optional Parameters

For MML commands, the parameters in red are mandatory while gray

means optional.


Default Value

It means select all the options while giving nothing in the field of choice.


Questions

Which operation is necessary during the loading process ？ What is difference between LST and DSP?


Summary

BAM software structure BAM Software Management Data configuration operations

Thank youwww.huawei.com

owg008201 bam introduction issue2.1

Documents