ozco project pavilion post and beam – free standing #212
DESCRIPTION
Detailed instruction on what OWT products to use and how to use them to build a Pavilion Post and Beam – Free Standing. Or use this guide and alter it to fit your specific project! Project #212TRANSCRIPT
V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.
OZCO Project #212 - Pavilion Post and
Beam – Free Standing
1OZCO Project #212 - Pavilion Post and Beam – Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.
OverviewOZCO Project #212 - Pavilion Post and Beam – Free Standing
3
12'8 12 "
13'4 14 "
15'7"
15'6 516 "
16' 12 "
= =
15'8 14 "
15' 12 "
19'9 14 "
16'7 34 "
7'2 1316 "
V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.
TranslucentOZCO Project #212 - Pavilion Post and Beam – Free Standing
4
V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.
Bill of Material(shown without roof for clarity)
3OZCO Project #212 - Pavilion Post and Beam – Free Standing
ITEM NO. QTY. PART NUMBER DESCRIPTION
1 4 56609 8x8 Post Base (8x8-PB-LS)2 4 56620 Truss Base Fan 10:12
10 56611 Truss Accent (TA-LS)2 56625 OWT Timber Screw 1-3/4"
3 2 56629Screw, OWT 7-1/2" (190mm) Timber with HCN
4 56621 1 1/2" Hex Cap Nut (HCN)
4 1 56618 4" Standard Rafter Clips (RC-LS-4)
5 2 56615 Flush Inside 904 56611 Truss Accent (TA-LS)1 56625 OWT Timber Screw 1-3/4"
6 4 56613 Butt Joint Flush (BJF)8 56611 Truss Accent (TA-LS)1 56625 OWT Timber Screw 1-3/4"
7 4 56651 OWT Timber Bolt 8-10"8 4 8x8 Cedar Post 8x8x8'0"9 4 1x2 Cedar
Board 1x2x16'0"
10 4 1x4 Cedar Board 1x4x16'0"
11 32 2x4 Cedar Board 2x4x10 3/4"
12 22 2x6 Cedar Board 2x6x16'0"
13 2 2x8 Cedar Board 2x8x16'0"
14 8 2x8 Cedar Board 2x8x4'0"
15 6 4x6 Cedar Board 4x6x8'0"
16 4 4x6 Cedar Board 4x6x16'0"
17 1 4x8 Cedar Board 4x8x16'0"
18 2 4x10 Cedar Board 4x10x16'0"
19 2 4x10 Cedar Board 4x10x16'0"
V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.
56609
OZCO4OZCO Project #212 - Pavilion Post and Beam – Free
Standing
56611
56625
56629
56621
5661856613
56615
56620 56651
V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.
Laredo Sunset & Ironwood
Laredo Sunset & Ironwood
7
2 great styles
Same functionality
choose your connection lifestyle
both styles available for most products
Ironwood(517XX series)
Laredo Sunset(566XX series)
V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.
Suggested Tools(others may be required)
5OZCO Project #212 - Pavilion Post and Beam – Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.
Cutlist16OZCO Project #212 - Pavilion Post and Beam – Free
Standing
2"
2"
2X4
post width
8X8
8'0"
9 78 "
2X8
1'8 58 "
1 78 "
45° R3'1 12 "
1 58 "x1.5
516 "
V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.
4x6 King Post 50°
50°
Cutlist27
OZCO Project #212 - Pavilion Post and Beam – Free Standing
5 34 "
6'7"
4'11 12 "
4'8 38 "
4x10
4x 12 " X 45°4x 1
2 " X 45° 16'0"
4x6 Web 50°
40°
V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.
Cutlist38OZCO Project #212 - Pavilion Post and Beam – Free Standing
1x4
50°
50°
12'8 516 "
12'7 58 "
78 "
4x6 & 2x6 50°
50°
12'6 116 "
1'10 316 "
2'1 1516 "
40° 50°
12'6 116 "
1x2 50°
50°
12'8 516 "
12'8 516 "
V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.
20'7 116 "
20'7 116 "
13'4 18 "
15'8 18 "
if site is not level,see Ozco Site Leveling instruction
site9OZCO Project #212 - Pavilion Post and Beam – Free Standing
Locate desiredcenter of structure
Gable end of structure
Gable end of structure
V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.
step 1OZCO Project #212 - Pavilion Post and Beam – Free Standing
13
Tool Required3/8" Driver
(Hex Cap Nut)provided
(OWT Screw)provided
note post orientation
V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.
= =
step 2OZCO Project #212 - Pavilion Post and Beam – Free Standing
14
Tool Required3/8" Driver
(Hex Cap Nut)provided
(OWT Screw)provided
V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.
step 3OZCO Project #212 - Pavilion Post and Beam – Free Standing
15
Tool Required3/8" Driver
(Hex Cap Nut)provided
(OWT Screw)provided
V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.
step 4OZCO Project #212 - Pavilion Post and Beam – Free Standing
16
Tool Required3/8" Driver
(Hex Cap Nut)provided
(OWT Screw)provided
V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.
step 5OZCO Project #212 - Pavilion Post and Beam – Free Standing
17
secure with nails or screws
repeat on all posts
V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.
step 6OZCO Project #212 - Pavilion Post and Beam – Free Standing
18
repeat connectors on backside of Truss
CL
Tool Required3/8" Driver
(Hex Cap Nut)provided
(OWT Screw)provided
CL
V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.
step 7OZCO Project #212 - Pavilion Post and Beam – Free Standing
19
repeat step 6 on opposite end
V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.
step 8OZCO Project #212 - Pavilion Post and Beam – Free Standing
20
=
=
Tool Required3/8" Driver
(Hex Cap Nut)provided
(OWT Screw)provided
V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.
~1-1/2" 1'4" typ
step 9OZCO Project #212 - Pavilion Post and Beam – Free Standing
21
Tool Required3/8" Driver
(Hex Cap Nut)provided
(OWT Screw)provided
secure with nails or screws
CL
V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.
step 10OZCO Project #212 - Pavilion Post and Beam – Free Standing
22
repeat previous step on opposite side
V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.
~1-1/2
step 11OZCO Project #212 - Pavilion Post and Beam – Free Standing
23
secure with nails or screwsrepeat on opposite side
5 78 "
Tool Required3/8" Driver
(Hex Cap Nut)provided
(OWT Screw)provided
V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.
step 12OZCO Project #212 - Pavilion Post and Beam – Free Standing
24
1x4
1x2
secure with nails or screwsrepeat on all sides
V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.
step 13OZCO Project #212 - Pavilion Post and Beam – Free Standing
25
trim rafters as desired
note:1x2 & 1x4 to extend past rafters
1x2
1x4
= =
1 34 "
V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.
step 14OZCO Project #212 - Pavilion Post and Beam – Free Standing
26
secure with nails or screwsrepeat on opposite side
V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/14/2017 . Please visit OZCOBP.com to get current information.
Roofing OptionOZCO Project #212 - Pavilion Post and Beam – Free Standing
27
shown with plywood and shingle roofing option