917190randcvr.qxp:p 2/23/10 8:46 pm page 2 #2010 · 2 zirconia (type 27) hp zirconia (type 27) max....

#2010

917190RandCvr.qxp:P 2/23/10 8:46 PM Page 2

P.O. BOX 25065 • 10221 SWEET VALLEY DRIVE • CLEVELAND, OHIO 44125216-986-1766 • FAX # 216-986-1778

www.randomproductsinc.com

PFX / Premium Flex— Depressed Center Grinding Wheels . . . . . . . . . . . . . . . . . . . . . . . . 1, 2, 3— Thin Cutting Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 5, 6, 7— Chopsaw Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8— Stationary Cut-Off Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Cup Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Plugs and Cones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Advantage Fast Cut Wheels

— Depressed Center Grinding Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9— 3 Ply High Speed Cut-Off Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10— Chopsaw Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10— Metal Cut-Off Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Bench and Pedestal Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 13Carbide Burrs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15Diamond Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 17, 18, 19Wire Brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 21, 22, 23Resin Fibre Discs

— Ceramic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24— High Performance Zirconia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25— Premium HT Aluminum Oxide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26— Aluminum Oxide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Resin Fibre Back Up Pads— Turbo Pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 26— Standard Pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Quick Change Discs – Type R and Type S— Premium Aluminum Oxide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28, 29— Green Zirconia (w/grinding aid) . . . . . . . . . . . . . . . . . . . . . . . . . . .28, 29— Surface Conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28, 29, 42, 43— Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28, 29, 42, 43, 48

Gold Paper Discs— Gold PSA Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30— Gold Hook & Loop Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

PSA Cloth Discs — Aluminum Oxide Resin Bond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31— “High Performance Blue” Alumina Zirconia . . . . . . . . . . . . . . . . . . . . 31

Flap Wheels— Mounted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32— Unmounted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32— Advantage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Cloth Sanding Belts— Available Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34— Standard Size Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35— Advantage Sanding Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

9 x 11 Sandpaper Sheets— Silicon Carbide Waterproof Latex Paper . . . . . . . . . . . . . . . . . . . . . . . . 37— Aluminum Oxide Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37— Garnet Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37— Silicon Carbide Non-Loading Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

9 x 11 Cloth Sheets— Aluminum Oxide Metal Cloth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37— Emery Cloth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37— Crocus Cloth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37— Sandscreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Shop Rolls— Resin Bond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38— Sandscreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38— Crocus Cloth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38— SuperFlex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39— Cloth Rolls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Non-Woven Abrasives— 6 x 9 Hand Pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40— Super Strip Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40— Surface Conditioning Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41— Quick Change Surface Conditioning Discs . . . . . . . . . . . .28, 29, 42, 43— Velcro® Style Surface Conditioning Discs . . . . . . . . . . . . . . . . . . . . 42, 43— Surface Conditioning Flap Discs . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 48— HD Ceramic Surface Conditioning Discs . . . . . . . . . . . . . . . . . . . . . . . 43— Gripper Pads & Holders . . . . . . . . . . . . . . . . . . . . . . . 28, 29, 42, 43, 48

Flap Discs— Ceramic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44— Turbo - Trimmable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44— High Density - Jumbo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45— High Performance Plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45— High Performance Blue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46— Advantage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47— Surface Conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48— Mini-Quick Change . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Specialty Cutting Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

PRODUCT INFORMATION CATALOG #2010

TABLE OF CONTENTSPAGE PAGE

We feature “Just In Time” Delivery to keep your inventorylow and constantly turning into profits.Stock Items

— Flap Discs, Resin Fibre Discs, Hand Pads, Flap Wheels,9 x 11 Paper and Cloth Sheets, Shop Rolls and PFX Grinding and Cutting Wheels are Standard StockItems and shipped within 24 hours.

100% SATISFACTION GUARANTEEDIf our products do not perform to your expectations, then simply return the unused portion for credit.

Made to Order Items— PSA Cloth Discs, Sanding Belts and Carbide Burrs are

usually shipped within 3 to 7 Working Days

Call us with your requirements, give us a blanket order and wewill have the products ready when you and your customers needthem.

DELIVERY INFORMATION



1

Max. WheelsPart # Size RPM Per Box

80121-H 9 x 3/32 x 5/8-11 6,600 1080121 9 x 3/32 x 7/8 6,600 2580177-H 41/2 x 3/32 x 5/8-11 13,300 1080177 41/2 x 3/32 x 7/8 13,300 25

DEPRESSED CENTER GRINDING WHEELS(Formerly Premium Flex Wheels)

All Type 27-Depressed Center wheels are available for all applications, whether you are grinding welds, deburring,working with aluminum, stainless steel, concrete or stone.

We combine the finest raw materials with the latest German technology to produce the best cost per grind ratio onthe market. All wheels listed below are in stock and are available for immediate shipment. Other sizes and gradesare available upon request.


80101 1 9 x 1/4 x 5/8-11 6,600 1080102 1 9 x 1/4 x 7/8 6,600 2580103 1 7 x 1/4 x 5/8-11 8,500 1080104 1 7 x 1/4 x 7/8 8,500 2580199 7 x 1/2 x 7/8 8,500 2580110-H 6 x 1/4 x 5/8-11 10,200 1080110 6 x 1/4 x 7/8 10,200 2580105 1 5 x 1/4 x 5/8-11 12,200 1080106 1 5 x 1/4 x 7/8 12,200 2580107 41/2 x 1/4 x 5/8-11 13,300 1080108 41/2 x 1/4 x 7/8 13,300 2580109 1 4 x 1/4 x 5/8 15,300 2580109-38 4 x 1/4 x 3/8 15,300 2580100-1 3 x 1/4 x 3/8 25,470 25

FERROUS METALS (Type 27)For weld grinding, deburring, steel, general metalworking jobs.


80111 1 9 x 1/8 x 5/8-11 6,600 1080112 9 x 1/8 x 7/8 6,600 2580113 1 7 x 1/8 x 5/8-11 8,500 1080114 7 x 1/8 x 7/8 8,500 2580115 6 x 1/8 x 5/8-11 10,200 1080116 6 x 1/8 x 7/8 10,200 2580120-H 5 x 1/8 x 5/8-11 12,200 1080120 5 x 1/8 x 7/8 12,200 2580117 41/2 x 1/8 x 5/8-11 13,300 1080118 41/2 x 1/8 x 7/8 13,300 2580119 1 4 x 1/8 x 5/8 15,300 2580119-38 4 x 1/8 x 3/8 15,300 25

PIPELINE (Type 27)For pipeline weld grinding, pipe beveling, cutting and notching.

3/32" CUTTING WHEELS (Type 27)For a wide variety of cutting applications.

917190RandTxt.qxp:P 2/23/10 8:49 PM Page 1


2

ZIRCONIA (Type 27)

HP ZIRCONIA (Type 27)Max. Wheels

Part # Size RPM Per Box

80601 1 9 x 1/4 x 5/8-11 6,600 1080602 9 x 1/4 x 7/8 6,600 2580603 1 7 x 1/4 x 5/8-11 8,500 1080604 1 7 x 1/4 x 7/8 8,500 2580607 41/2 x 1/4 x 5/8-11 13,300 1080608 41/2 x 1/4 x 7/8 13,300 2580609 4 x 1/4 x 5/8 15,300 25


80150 1 9 x 1/4 x 5/8-11 6,600 1080151 1 9 x 1/4 x 7/8 6,600 2580152 7 x 1/4 x 7/8 8,500 2580153 7 x 1/4 x 5/8-11 8,500 1080157 41/2 x 1/4 x 5/8-11 13,300 1080158 41/2 x 1/4 x 7/8 13,300 2580159 4 x 1/4 x 5/8 15,300 25

HIGH PERFORMANCE ZIRCONIADEPRESSED CENTER GRINDING WHEELS

HP PLUSPerhaps the best DPC wheel on the market!A unique combination of super tough ceramicgrain and high performance zirconia grain, along with our special bond and curing process,resulting in a far superior grinding wheel.

HPHigher concentration of zirconia grain than mosttraditional wheels. Provides super fast cutting actionand extended wheel life way beyond other wheels.

ZIRCONIAHigh performance abrasive alloy grain. Fast cutting action. Long wheel life.


80161 1 9 x 1/8 x 5/8-11 6,600 1080162 1 9 x 1/8 x 7/8 6,600 2580163 7 x 1/8 x 5/8-11 8,500 1080164 7 x 1/8 x 7/8 8,500 2580167 41/2 x 1/8 x 5/8-11 13,300 1080168 41/2 x 1/8 x 7/8 13,300 25

ZIRCONIA (Type 27)

HP ZIRCONIA PIPELINE (Type 27)Max. Wheels


80611 1 9 x 1/8 x 5/8-11 6,600 1080612 9 x 1/8 x 7/8 6,600 2580613 1 7 x 1/8 x 5/8-11 8,500 1080614 1 7 x 1/8 x 7/8 8,500 2580617 41/2 x 1/8 x 5/8-11 13,300 1080618 41/2 x 1/8 x 7/8 13,300 25


80711 1 9 x 1/8 x 5/8-11 6,600 1080712 1 9 x 1/8 x 7/8 6,600 2580713 1 7 x 1/8 x 5/8-11 8,500 1080714 1 7 x 1/8 x 7/8 8,500 2580717 41/2 x 1/8 x 5/8-11 13,300 1080718 41/2 x 1/8 x 7/8 13,300 25


80701 1 9 x 1/4 x 5/8-11 6,600 1080702 1 9 x 1/4 x 7/8 6,600 2580703 1 7 x 1/4 x 5/8-11 8,500 1080704 1 7 x 1/4 x 7/8 8,500 2580707 41/2 x 1/4 x 5/8-11 13,300 1080708 41/2 x 1/4 x 7/8 13,300 2580709 4 x 1/4 x 5/8 15,300 25

HP PLUS PIPELINE (Type 27)HP PLUS (Type 27)



3

CONCRETE • MASONRY • STONE • CAST IRON (Type 27)Extra sharp silicon carbide wheel - Fast cutting, long life.


80141 1 9 x 1/4 x 5/8-11 6,600 1080142 9 x 1/4 x 7/8 6,600 2580143 1 7 x 1/4 x 5/8-11 8,500 1080144 1 7 x 1/4 x 7/8 8,500 2580147 41/2 x 1/4 x 5/8-11 13,300 1080148 41/2 x 1/4 x 7/8 13,300 2580149 4 x 1/4 x 5/8 15,300 25

DEPRESSED CENTER GRINDING WHEELS(Formerly Premium Flex Wheels)

DUCTILE IRON-AC 24 S (Type 27)Max. Wheels


80171 1 9 x 1/4 x 5/8-11 6,600 1080172 9 x 1/4 x 7/8 6,600 2580173 1 7 x 1/4 x 5/8-11 8,500 1080174 1 7 x 1/4 x 7/8 8,500 25


80133 1 7 x 1/4 x 5/8-11 8,500 1080134 1 7 x 1/4 x 7/8 8,500 2580137 41/2 x 1/4 x 5/8-11 13,300 1080138 41/2 x 1/4 x 7/8 13,300 25


80122 1 9 x 1/4 x 5/8-11 6,600 1080122-R 1 9 x 1/4 x 7/8 6,600 2580123 1 7 x 1/4 x 5/8-11 8,500 1080124 1 7 x 1/4 x 7/8 8,500 2580127 41/2 x 1/4 x 5/8-11 13,300 1080128 41/2 x 1/4 x 7/8 15,300 2580129 4 x 1/4 x 5/8 15,300 2580129-38 4 x 1/4 x 5/8 15,300 25

ALUMINUM (Type 27)Special soft bond for fast stock removal without loading.

STAINLESS STEEL (Type 27)Designed to work with hard to grind material like stainless steel.

SAUCER (Type 28)Special saucer shape wheels designed to grind in a moreflat position than Type 27.


31226 1 9 x 1/4 x 5/8-11 6,600 1031227 9 x 1/4 x 7/8 6,600 2531228 1 7 x 1/4 x 5/8-11 8,500 1031229 1 7 x 1/4 x 7/8 8,500 25

Contamination Free


Thin Cutting Wheels

4



5

Thin Cutting Wheels

In the Random Products tradition, we would like to introduce a new series of “HIGH PERFORMANCE”

thin cutting wheels designed to cut stainless steel, steel, sheet metal, aluminum and other types of metal.

In our constant search for perfection, we have developed special formulations that feature only the finest raw materials available; aunique combination of premium abrasive grains, heat resistant resins and two (2) layers of ultra thin fiberglass reinforcement. We usea special bond that allows the wheels to cut fast and last longer than most other high performance wheels on the market.

All wheels are manufactured on our high speed “State of the Art” automatic presses. These presses use the most advanced thin wheeltechnology in the abrasive business today and can produce wheels at a higher rate of speed than any of our competitors.

Add up the advantages:• Consistent quality from wheel to wheel. • Price advantage – We can offer a price advantage over the competition simply due to the large volume of wheels

that can be produced.• Operator friendly – Precise, effortless cutting with a minimum amount of dust or noise.

UltraUltra – (def) going beyond others or beyond due limit, extreme, uncompromising

The ULTIMATE Performer!

• Premium abrasive grains including specially treated zirconia grains• Special Bond with Advanced Resin Formula• Extended oven curing process to release almost every harmful

filler that reacts to high temperatures in excess of 350˚F (180˚C)• Contamination Free

– Contains less than 0.1% iron (Fe), sulfur (S) and chloride (Cl)– Will not leave residue or contaminants on workpiece that can possibly

develop rust spots or other surface imperfections on stainless steel• Environmentally & Operator Friendly

– Little waste of cutting material– Extremely fast cutting– Requires low pressure to cut which reduces operator fatigue and increases tool life– Very little smoke or other harmful particles released in the air

Excellent for Stainless Steel & other

Tough Metals!

TYPE 1 – 25 wheels per boxPART # SIZE MAX RPM

80525 6 x .040 x 7/8 10,200

80521 4-1/2 x .040 x 7/8 13,300


80580 6 x .045 x 7/8 10,200

80580-H 6 x .045 x 5/8-11 10,200

80578 4-1/2 x .045 x 7/8 13,300

80578-H 4-1/2 x .045 x 5/8-11 13,300



6

Stainless Steel / MetalFast cutting, long lasting wheels designed to cut

stainless steel, steel, sheet metal, tubes, gratings,

steel rope, reinforcements and various other jobs.

CONTAMINATION FREE!


80365 6 x .040 x 7/8 10,200

80366 6 x 1/16 x 7/8 10,200

80361 4-1/2 x .040 x 7/8 13,300

80362 4-1/2 x 1/16 x 7/8 13,300

AluminumA special formulation designed to cut aluminum and

other non-ferrous metals. Free cutting wheels with a

minimum amount of loading or glazing.


80315 6 x .040 x 7/8 10,200

80316 6 x 1/16 x 7/8 10,200

80311 4-1/2 x .040 x 7/8 13,300

80312 4-1/2 x 1/16 x 7/8 13,300

Thin Cutting Wheels


80195 6 x .045 x 7/8 10,200

80195-H 6 x .045 x 5/8-11 10,200

80193 4-1/2 x .045 x 7/8 13,300

80193-H 4-1/2 x .045 x 5/8-11 13,300


80186 6 x .045 x 7/8 10,200

80186-H 6 x .045 x 5/8-11 10,200

80184 4-1/2 x .045 x 7/8 13,300

80184-H 4-1/2 x .045 x 5/8-11 13,300



7

MetalThe wheel that set the Standard! Excellent thin cutting wheel for

all types of metal, sheet metal, gratings, tubes, conduit, etc.

Thin Cutting Wheels

For use with Angle Grinders

Special thin cutting wheels for use on angle grinders.

Double reinforced for safety, premium materials

combined with German technology ensures top quality.

Max. WheelsPart# Size RPM Per Box

95111 3 x 1⁄32 x 1⁄4 25,000 10095112 3 x 1⁄32 x 3⁄895113 3 x 1⁄16 x 1⁄4 25,000 10095114 3 x 1⁄16 x 3⁄895115 3 x 1⁄8 x 1⁄4 25,000 10095116 3 x 1⁄8 x 3⁄895126 1⁄4 x 1⁄4 Cut-off wheel adapter

Fits wheels with a 1/4" hole95127 3⁄8 x 1⁄4 Cut-off wheel adapter

Fits wheels with a 3/8" hole

95117 4 x 1⁄32 x 1⁄495118 4 x 1⁄32 x 3⁄8 18,000 10095125 4 x 1⁄32 x 5⁄895119 4 x 1⁄16 x 1⁄495120 4 x 1⁄16 x 3⁄8 18,000 10095121 4 x 1⁄16 x 5⁄895133 4 x 3⁄32 x 3⁄8 18,000 10095122 4 x 1⁄8 x 1⁄495123 4 x 1⁄8 x 3⁄8 18,000 10095124 4 x 1⁄8 x 5⁄8

Max. WheelsPart# Size RPM Per Box


80325 6 x .040 x 7/8 10,200

80326 6 x 1/16 x 7/8 10,200

80323 5 x .040 x 7/8 12,250

80324 5 x 1/16 x 7/8 12,250

80321 4-1/2 x .040 x 7/8 13,300

80322 4-1/2 x 1/16 x 7/8 13,300

80355 7 x .035 x 5/8 8,500

80352 6 x .040 x 5/8 10,200

80350 5 x .040 x 5/8 12,250

80348 4-1/2 x .040 x 5/8 13,300


80181 7 x .045 x 7/8 8,500

80181-H 7 x .045 x 5/8-11 8,500

80180 6 x .045 x 7/8 10,200

80180-H 6 x .045 x 5/8-11 10,200

80179 5 x .045 x 7/8 12,250

80179-H 5 x .045 x 5/8-11 12,250

80178 4-1/2 x .045 x 7/8 13,300

80178-H 4-1/2 x .045 x 5/8-11 13,300

80176 4 x .045 x 5/8 15,300

80176-H 4 x .045 x 3/8-24 15,300

HIGH SPEED CUT-OFF WHEELSFOR DIE GRINDERS

Double Reinforced Cutting Wheels – Fast Cutting, Long Life, Burr Free Cut



8

METAL STUDSMax. Wheels


80204 12 x 3/32 x 1 5100 2580205 14 x 3/32 x 1 4400 10

FERROUS METALS and STAINLESS STEELSTATIONARY CUT-OFF WHEELS

CHOPSAW WHEELS


80208 10 x 3/32 x 5/8 6100 2580209 10 x 3/32 x 1 6100 2580210 10 x 1/8 x 5/8 6100 2580211 10 x 1/8 x 1 6100 2580212 12 x 1/8 x 1 5100 2580213 14 x 1/8 x 1 4400 1080214 16 x 5/32 x 1 3800 1080216 18 x 5/32 x 1 3400 1080215 20 x 3/16 x 1 3000 10

METALMax. Wheels


80201 12 x 3/32 x 1 5100 2580202 14 x 3/32 x 1 4400 1080203 16 x 3/32 x 1 3800 10

METAL – A16 CONCRETE – C16

ZIRCONIA - Z16Extra sharp Zirconia grain forsuperfast cut/long life.

TYPE 11 – CUP WHEELSAll 6” cup wheels come with metal safety back

Part # Size

80401 1 6 x 2 x 5/8-11Part # Size

95193 1 6 x 2 x 5/8-11

DUCTILE IRON – CA16Combo aluminum oxide/silicon carbide grains.

Part # Size

95199 1 6 x 2 x 5/8-1195198 1 5 x 2 x 5/8-1195197 1 4 x 2 x 5/8-11

Size

11/2 x 21/2

11/2 x 32 x 3

21/2 x 33 x 3

METAL

Type 16 Type 17 Type 18 Type 18R

PLUGS AND CONESTYPE 16, 17, 18 and 18RPlease specify type when ordering.

Part # Size

95196 1 6 x 2 x 5/8-1195195 1 5 x 2 x 5/8-1195194 1 4 x 2 x 5/8-11



FAST CUTDEPRESSED CENTER GRINDING WHEELS

The Advantage brand is an international selection of coated and

bonded abrasive products, wire brushes and diamond blades designed for general purpose

applications when primary concerns are low costs, consistent quality and good value.


31301 9 x 1/4 x 5/8-11 6,600 1031302 9 x 1/4 x 7/8 6,600 2531303 7 x 1/4 x 5/8-11 8,500 1031304 7 x 1/4 x 7/8 8,500 2531305 5 x 1/4 x 5/8-11 12,200 1031306 5 x 1/4 x 7/8 12,200 5031307 41/2 x 1/4 x 5/8-11 13,300 1031308 41/2 x 1/4 x 7/8 13,300 5031309 4 x 1/4 x 5/8 15,300 5031309-38 4 x 1/4 x 3/8 15,300 50

FAST CUT METAL (Type 27)For weld grinding, deburring, steel, general metalworking jobs.


31311 19 x 1/8 x 5/8-11 6,600 1031312 9 x 1/8 x 7/8 6,600 2531313 7 x 1/8 x 5/8-11 8,500 1031314 7 x 1/8 x 7/8 8,500 5031315 5 x 1/8 x 5/8-11 12,200 1031316 5 x 1/8 x 7/8 12,200 5031317 41/2 x 1/8 x 5/8-11 13,300 1031318 41/2 x 1/8 x 7/8 13,300 5031319 1 4 x 1/8 x 5/8 13,500 5031319-38 4 x 1/8 x 3/8 15,300 50

PIPELINE (Type 27)For pipeline weld grinding, pipe beveling, cutting and notching.


31376 4 x .045 x 5/8 15,300 5031378 41/2 x .045 x 7/8 13,300 5031379 5 x .045 x 7/8 12,250 5031380 6 x .045 x 7/8 10,200 50

Excellent general purpose wheels designed to compete with the low-cost imports.FAST CUTTING ACTION • GOOD WHEEL LIFE • EXCELLENT VALUE

.045" CUTTING WHEEL (Type 27)Special thin Type 27 wheel for Burr Free cutting of metal.

9



10

10 WHEELS PER BOX

Max.Part # Size RPM

31181 12 x 1/8 x 1 640031182 12 x 1/8 x 20mm 640031183 14 x 1/8 x 1 546031184 14 x 1/8 x 20mm 5460

METALAluminum Oxide for Steel, Angle Iron, Rebar

Max.Part # Size RPM

31170 12 x 3/32 x 1 510031171 14 x 3/32 x 1 4400

METALDouble External Reinforced

Max.Part # Size RPM

31175 12 x 7/64 x 1 510031176 14 x 7/64 x 1 4400

METALSingle Internal Reinforced

Max.Part # Size RPM

31187 14 x 1/8 x 1 546031188 14 x 1/8 x 20mm 546012” & 16” wheels are available upon request.

CONCRETE - MASONRY - STONEExtra sharp silicon carbide for a fast smooth cut

Max.Part # Size RPM

31189 12 x 1/8 x 1 640031190 12 x 1/8 x 20mm 640031191 14 x 1/8 x 1 546031192 14 x 1/8 x 20mm 5460

DUCTILE IRONSpecial blend of aluminum oxide and silicon carbide.

FAST CUT 3-PLYHIGH SPEED CUT-OFF WHEELS




CHOPSAW WHEELS10 WHEELS PER BOX

All Advantage Fast Cut High Speed Cut-Off Wheels are designed to provide fast cutting actionwith long life. They are made from premium abrasive grains, reinforced with three (3) full layersof fiberglass for safe and smooth cutting. German engineered for top performance and consistentquality. For use with portable gas powered saws.



11

FAST CUTMETAL CUT-OFF WHEELS




TYPE 1 THIN WHEELSFor use with Angle Grinders


31155 1 6 x .040 x 7/8 10,220 5031156 1 6 x 1/16 x 7/8 10,200 5031151 41/2 x .040 x 7/8 13,300 5031152 41/2 x 1/16 x 7/8 13,300 50

Fully reinforced with 2 outside layers of fiberglass.For use with high speed Die Grinder and Machine Shop Cutting.

CUT-OFF WHEELS FOR

POWER HAND SAWS25 WHEELS PER BOX

HIGH SPEED CUT-OFF WHEELS

Part# SIZE Max. WheelsRPM Per Box

Part# SIZE Max. WheelsRPM Per Box

31111 3 x 1⁄32 x 1⁄4 25,000 10031112 3 x 1⁄32 x 3⁄831113 3 x 1⁄16 x 1⁄4 25,000 10031114 3 x 1⁄16 x 3⁄831115 3 x 1⁄8 x 1⁄4 25,000 5031116 3 x 1⁄8 x 3⁄895126 1⁄4 x 1⁄4 Cut-off wheel adapter

Fits wheels with a 1/4" hole95127 3⁄8 x 1⁄4 Cut-off wheel adapter

Fits wheels with a 3/8" hole

31117 4 x 1⁄32 x 1⁄431118 4 x 1⁄32 x 3⁄8 22,000 10031125 4 x 1⁄32 x 5⁄831119 4 x 1⁄16 x 1⁄431120 4 x 1⁄16 x 3⁄8 22,000 10031121 4 x 1⁄16 x 5⁄831122 4 x 1⁄8 x 1⁄4 22,000 5031123 4 x 1⁄8 x 3⁄831124 4 x 1⁄8 x 5⁄8

Max.Part # Size RPM

31131 1 7 x 1/8 x 5/8 � 8,500

METAL



12




Part # Size Spec

95201 6 x 1⁄2 x 1 A24-Q95202 6 x 1⁄2 x 1 A36-O95203 6 x 1⁄2 x 1 A46-M95204 6 x 1⁄2 x 1 A60-M95205 6 x 1⁄2 x 1 A80-M95206 6 x 1⁄2 x 1 GC60-I95207 6 x 1⁄2 x 1 GC80-I95208 6 x 1⁄2 x 1 GC100-I


95217 6 x 1 x 1 A24-Q95218 6 x 1 x 1 A36-O95219 6 x 1 x 1 A46-M95220 6 x 1 x 1 A60-M95221 6 x 1 x 1 A80-M95222 6 x 1 x 1 GC60-I95223 6 x 1 x 1 GC80-I95224 6 x 1 x 1 GC100-I

Part # Size Spec




BENCH AND PEDESTAL WHEELSTYPE A —

TYPE GC —

Aluminum Oxide general purpose wheels for most roughing and finishing operations. Thesewheels provide fast cutting action along with a relatively good finish. For soft steels and tool steel.Vitrified Bond.

Green Silicon Carbide abrasive grain for sharpening carbide tool bits and other carbide applications. They are cool cutting and provide an excellent finish. Vitrified Bond.

TYPE AAvailable in grades:

Extra Coarse – 24-QCoarse – 36-O, 46-MMedium – 60-M, 80-M

TYPE GCAvailable in grades:Medium – 60-IFine – 80-IExtra Fine – 100-I

#95299 Wheel Dressing Tool



13




Part # Size Spec

95249 10 x 1 x 11⁄4 A24-Q95250 10 x 1 x 11⁄4 A36-O95251 10 x 1 x 11⁄4 A46-M95252 10 x 1 x 11⁄4 A60-M95253 10 x 1 x 11⁄4 A80-M95254 10 x 1 x 11⁄4 GC60-I95256 10 x 1 x 11⁄4 GC80-I95257 10 x 1 x 11⁄4 GC100-I

95258 10 x 11⁄2 x 11⁄4 A24-Q95259 10 x 11⁄2 x 11⁄4 A36-O95260 10 x 11⁄2 x 11⁄4 A46-M95261 10 x 11⁄2 x 11⁄4 A60-M95262 10 x 11⁄2 x 11⁄4 A80-M95263 10 x 11⁄2 x 11⁄4 GC60-I95264 10 x 11⁄2 x 11⁄4 GC80-I95265 10 x 11⁄2 x 11⁄4 GC100-I


Part # Size Spec

95274 12 x 11⁄2 x 11⁄4 A24-Q95275 12 x 11⁄2 x 11⁄4 A36-O95276 12 x 11⁄2 x 11⁄4 A46-M95277 12 x 11⁄2 x 11⁄4 A60-M95278 12 x 11⁄2 x 11⁄4 A80-M95279 12 x 11⁄2 x 11⁄4 GC60-I95280 12 x 11⁄2 x 11⁄4 GC80-I95281 12 x 11⁄2 x 11⁄4 GC100-I



BENCH AND PEDESTAL WHEELSTYPE A —

TYPE GC —

Aluminum Oxide general purpose wheels for most roughing and finishing operations. Thesewheels provide fast cutting action along with a relatively good finish. For soft steels and tool steel.Vitrified Bond.

Green Silicon Carbide abrasive grain for sharpening carbide tool bits and other carbide applications. They are cool cutting and provide an excellent finish. Vitrified Bond.

TYPE AAvailable in grades:

Extra Coarse – 24-QCoarse – 36-O, 46-MMedium – 60-M, 80-M

TYPE GCAvailable in grades:Medium – 60-IFine – 80-IExtra Fine – 100-I

#95299 Wheel Dressing Tool



14

PRODUCT BURR SIZE# Dia. x Length PART #

DOUBLE CUTSA-43* 1⁄8 x 9⁄16 81020SA-11 1⁄8 x 1⁄2 81023SA-14 3⁄16 x 5⁄8 81024SA-1 1⁄4 x 5⁄8 81025SA-1A 1⁄4 x 1 81026SA-2 5⁄16 x 3⁄4 81027SA-3 3⁄8 x 3⁄4 81028SA-4 7⁄16 x 1 81029SA-5 1⁄2 x 1 81030SA-6 5⁄8 x 1 81031SA-16 3⁄4 x 3⁄4 81032SA-7 3⁄4 x 1 81033SA-9 1 x 1 81034

ALUMINUM CUTSA-1 1⁄4 x 5⁄8 81035SA-3 3⁄8 x 3⁄4 81036SA-5 1⁄2 x 1 81037SA-6 5⁄8 x 1 81038SA-7 3⁄4 x 1 81039* Burrs have a 1/8” Shank


DOUBLE CUTSB-11 1⁄8 x 1⁄2 81062SB-14 3⁄16 x 5⁄8 81063SB-1 1⁄4 x 5⁄8 81064SB-1A 1⁄4 x 1 81065SB-2 5⁄16 x 3⁄4 81066SB-3 3⁄8 x 3⁄4 81067SB-4 7⁄16 x 1 81068SB-5 1⁄2 x 1 81069SB-6 5⁄8 x 1 81070SB-16 3⁄4 x 3⁄4 81071SB-7 3⁄4 x 1 81072SB-9 1 x 1 81073

ALUMINUM CUTSB-1 1⁄4 x 5⁄8 81074SB-3 3⁄8 x 3⁄4 81075SB-5 1⁄2 x 1 81076SB-6 5⁄8 x 1 81077SB-7 3⁄4 x 1 81078

CARBIDE BURRSAll Burrs stocked with standard 1⁄4" Shank - unless otherwise noted

Other shapes/sizes/cuts available upon request.

CYLINDRICAL CYLINDRICAL END CUT


DOUBLE CUTSC-41* 3⁄32 x 7⁄16 81094SC-42* 1⁄8 x 9⁄16 81095SC-11 1⁄8 x 1⁄2 81098SC-14 3⁄16 x 5⁄8 81099SC-1 1⁄4 x 5⁄8 81100SC-1A 1⁄4 x 1 81101SC-2 5⁄16 x 3⁄4 81102SC-3 3⁄8 x 3⁄4 81103SC-4 7⁄16 x 1 81104SC-5 1⁄2 x 1 81105SC-6 5⁄8 x 1 81106SC-7 3⁄4 x 1 81107SC-9 1 x 1 81108

ALUMINUM CUTSC-1 1⁄4 x 5⁄8 81109SC-3 3⁄8 x 3⁄4 81110SC-5 1⁄2 x 1 81111SC-6 5⁄8 x 1 81112SC-7 3⁄4 x 1 81113* Burrs have a 1/8” Shank


DOUBLE CUTSD-42* 1⁄8 BALL 81129SD-11 1⁄8 BALL 81132SD-14 3⁄16 BALL 81133SD-1 1⁄4 BALL 81134SD-2 5⁄16 BALL 81135SD-3 3⁄8 BALL 81136SD-4 7⁄16 BALL 81137SD-5 1⁄2 BALL 81138SD-6 5⁄8 BALL 81139SD-7 3⁄4 BALL 81140SD-9 1 BALL 81141

ALUMINUM CUTSD-1 1⁄4 BALL 81142SD-3 3⁄8 BALL 81143SD-5 1⁄2 BALL 81144SD-7 3⁄4 BALL 81146

CYLINDRICAL RADIUS END BALL




8 pc. Burr KitMost popular burrs in compact plastic case.

Part # 81000



15


DOUBLE CUTSG-1 1⁄4 x 5⁄8 81215SG-2 5⁄16 x 3⁄4 81216SG-3 3⁄8 x 3⁄4 81217SG-13 1⁄2 x 3⁄4 81218SG-5 1⁄2 x 1 81219SG-6 5⁄8 x 1 81220SG-7 3⁄4 x 1 81221SG-15 3⁄4 x 11⁄2 81222

ALUMINUM CUTSG-1 1⁄4 x 5⁄8 81223SG-3 3⁄8 x 3⁄4 81224SG-5 1⁄2 x 1 81225SG-7 3⁄4 x 1 81227


DOUBLE CUTSF-1 1⁄4 x 5⁄8 81183SF-3 3⁄8 x 3⁄4 81184SF-4 7⁄16 x 1 81185SF-13 1⁄2 x 3⁄4 81186SF-5 1⁄2 x 1 81187SF-6 5⁄8 x 1 81188SF-7 3⁄4 x 1 81189SF-14 3⁄4 x 11⁄4 81190SF-15 3⁄4 x 11⁄2 81191

ALUMINUM CUTSF-1 1⁄4 x 5⁄8 81192SF-3 3⁄8 x 3⁄4 81193SF-5 1⁄2 x 1 81194SF-6 5⁄8 x 1 81195SF-7 3⁄4 x 1 81197

POINTED TREE ROUND TREE RADIUS END


DOUBLE CUTSE-1 1⁄4 x 3⁄8 81156SE-3 3⁄8 x 3⁄4 81157SE-5 1⁄2 x 7⁄8 81158SE-6 5⁄8 x 1 81159SE-7 3⁄4 x 1 81160

ALUMINUM CUTSE-1 1⁄4 x 3⁄8 81161SE-3 3⁄8 x 3⁄4 81162SE-5 1⁄2 x 7⁄8 81163SE-6 5⁄8 x 1 81164SE-7 3⁄4 x 1 81165


DOUBLE CUTSL-1 1⁄4 x 5⁄8 81280SL-2 5⁄16 x 7⁄8 81281SL-3 3⁄8 x 11⁄16 81282SL-4 1⁄2 x 11⁄8 81283SL-5 5⁄8 x 13⁄16 81284SL-7 3⁄4 x 11⁄2 81285

ALUMINUM CUTSL-1 1⁄4 x 5⁄8 81286SL-2 5⁄16 x 7⁄8 81286-2ACSL-3 3⁄8 x 11⁄16 81287SL-4 1⁄2 x 11⁄8 81288SL-5 5⁄8 x 13⁄16 81289SL-6 5⁄8 x 15⁄16 81289-6ACSL-7 3⁄4 x 11⁄2 81290

OVAL

14˚ INCLINED ANGLE


DOUBLE CUTSM-1 1⁄4 x 1⁄2 81305SM-2 1⁄4 x 3⁄4 81306SM-3 1⁄4 x 1 81307SM-4 3⁄8 x 5⁄8 81308SM-5 1⁄2 x 7⁄8 81309SM-6 5⁄8 x 1 81310

ALUMINUM CUTSM-2 1⁄4 x 3⁄4 81310-2ACSM-5 1⁄2 x 7⁄8 81310-5ACSM-6 5⁄8 x 1 81310-6AC


DOUBLE CUTSH-1 1⁄4 x 5⁄8 81237SH-2 5⁄16 x 3⁄4 81238SH-5 1⁄2 x 11⁄4 81239SH-6 5⁄8 x 17⁄16 81240SH-7 3⁄4 x 15⁄8 81241

CONE

FLAME

CARBIDE BURRSAll Burrs stocked with standard 1⁄4" Shank

Other shapes/sizes/cuts available upon request.






16

DIAMOND BLADES



17

DIAMOND BLADES

CONCRETECured and reinforced concrete, pavers, bluestone & building materials.

Part # Size

Premium Gold Series63225 12 x .110 x 163226 12 x .110 x 20mm63227 14 x .125 x 163228 14 x .125 x 20mm

Silver Series62225 12 x .110 x 162226 12 x .110 x 20mm62227 14 x .125 x 162228 14 x .125 x 20mm

Economy62127 14 x 1 (20mm Bushings)

Part # Size

Premium Gold Series63229 12 x .110 x 163230 12 x .110 x 20mm63231 14 x .125 x 163232 14 x .125 x 20mm

Silver Series62229 12 x .110 x 162230 12 x .110 x 20mm62231 14 x .125 x 162232 14 x .125 x 20mm

ASPHALT/GREEN CONCRETEAsphalt, green concrete, brick, block, abrasive materials.



18

DIAMOND BLADESGENERAL PURPOSE APPLICATIONS



19

DIAMOND BLADES



20

CRIMPED WHEEL BRUSHFor removal of rust, paint and dirt. Excellent for deburring,stripping, polishing or applying a scratch pattern.

Wire Wire MaxPart # Size Type Diam. RPM

56-415161 2”* Steel .012” 20,00056-417161 3”* Steel .012” 20,00056-344142 6” Steel .008” 6,00056-344172 6” Steel .014” 6,00056-344362 6” Stainless .012” 6,00056-355172 7” Steel .014” 6,00056-355372 7” Stainless .014” 6,00056-365172 8” Steel .014” 6,00056-376162 10” Steel .012” 3,600*1/2” arbor hole - includes 3/8” bushingspkg: 2” & 3” 10 per boxpkg: 6” & 8” - individually boxed / multi bore bushings

Our wire brushes are produced at our affiliated plant located in Germany. They have been producing wire brushes forover 70 years under the strict guidelines of the German safety standards and carry many quality certifications includingISO 9001, DAR and Allianz Cert.

Our factory combines the latest in brush technology and uses the highest quality brush fill materials to produce a fullrange of power and hand brushes for many applications. They use “state-of-the-art” automated equipment and allbrushes are produced under a very controlled manufacturing process. This insures consistent quality from brush to brush.

Another advantage is that they are a fully integrated manufacturer that is they produce all of their own sideplates,wooden handles and spare parts, which is essential to controlling costs and maintaining competitive pricing.

All wire brushes are in stock and are available for immediate shipment from our Cleveland, Ohio warehouse.

STEEL STAINLESS STEEL

WIRE BRUSHES

BRUSH FILL MATERIALSSpecial high tensile strength steel wire available in differentdiameters for knot type, crimped and hand brushes.

Stainless Steel wire brushes are usually designated withgreen side plates/cups. Stainless brushes are resistantagainst corrosion and high temperatures.

WIRE BRUSHES

1/4” SHANK MOUNTEDCRIMPED WHEEL BRUSH


56-415163 2 x 1/4 Steel .014” 15,00056-415362 2 x 1/4 Stainless .012” 15,00056-417162 3 x 1/4 Steel .012” 15,00056-417362 3 x 1/4 Stainless .012” 15,00056-419162 4 x 1/4 Steel .012” 4,50056-419362 4 x 1/4 Stainless .012” 4,500



21

WIRE BRUSHES

KNOT CONICAL BRUSHSpecial conical shape that enables brush to be used flat like acup brush or on the end like a wire wheel brush. Also used forhard to reach areas.

KNOT CUP BRUSHFor heavy duty use. Preparing metal surfaces priorto painting. Removal of rust, slag, weld scale orconcrete waste.

CRIMPED CUP BRUSHIdeal for working on large surfaces. Used for theremoval of rust, paint, dirt and scale. The crimpedwire is also excellent for polishing and surfacepreparation prior to painting or plating.


53-472258 4-1/2 x 5/8-11 Steel .020” 15,00053-472858 4-1/2 x 5/8-11 Stainless .020” 15,000pkg: individually boxed


54-482118 2-3/4 x 5/8-11 Steel .014” 14,00054-482213 2-3/4 x M10 x 1.25 Steel .020” 14,00054-482218 2-3/4 x 5/8-11 Steel .020” 14,00054-482219 2-3/4 x 3/8-24 Steel .020” 14,00054-482818 2-3/4 x 5/8-11 Stainless .020” 14,00054-485238 3-1/2 x 5/8-11 Steel .020” 14,00054-485838 3-1/2 x 5/8-11 Stainless .020” 14,00054-486218 4 x 5/8-11 Steel .020” 9,00054-486818 4 x 5/8-11 Stainless .020” 9,00054-487318 5 x 5/8-11 Steel .020” 6,50054-488218 6 x 5/8-11 Steel .020” 6,50054-488338 6 x 5/8-11 Steel .031” 6,50054-488838 6 x 5/8-11 Stainless .020” 6,500pkg: individually boxed


55-423168 2-3/4 x 5/8-11 Steel .012” 14,00055-423368 2-3/4 x 5/8-11 Stainless .012” 14,00055-424178 3-1/2 x 5/8-11 Steel .014” 14,00055-426178 4 x 5/8-11 Steel .014” 9,00055-426368 4 x 5/8-11 Stainless .012” 9,00055-427178 5 x 5/8-11 Steel .014” 6,50055-429198 6 x 5/8-11 Steel .020” 6,50055-429368 6 x 5/8-11 Stainless .012” 6,500pkg: individually boxed



WIRE BRUSHES

STRINGER BEADPIPELINE BRUSHA specially designed brush for the pipeline industry. For cleaning, deburring and scale removal of welds.

KNOT WHEEL BRUSHSTANDARD TWISTUsed to remove weld scale, rust, paint, slag, rubber residue and also for deburring.


51-471208 4 x 5/8-11 Steel .020” 20,00051-471808 4 x 5/8-11 Stainless .020” 20,00051-472208 4-1/2 x 5/8-11 Steel .020” 15,00051-472808 4-1/2 x 5/8-11 Stainless .020” 15,00051-473208 5 x 5/8-11 Steel .020” 12,50051-473808 5 x 5/8-11 Stainless .020” 12,50051-474208 6 x 5/8-11 Steel .020” 12,50051-474808 6 x 5/8-11 Stainless .020” 12,50051-475208 7 x 5/8-11 Steel .020” 12,50051-475808 7 x 5/8-11 Stainless .020” 12,500pkg: 4” brushes are 10 per box / all others 5 per box


52-470111 3 x 7/8* Steel .014” 25,00052-470211 3 x 7/8* Steel .020” 25,00052-470811 3 x 7/8* Stainless .020” 25,00052-471111 4 x 7/8* Steel .014” 20,00052-471211 4 x 7/8* Steel .020” 20,00052-471811 4 x 7/8* Stainless .020” 20,00052-471118 4 x 5/8-11 Steel .014” 20,00052-471218 4 x 5/8-11 Steel .020” 20,00052-471818 4 x 5/8-11 Stainless .020” 20,00052-472218 4-1/2 x 5/8-11 Steel .020” 15,00052-472818 4-1/2 x 5/8-11 Stainless .020” 15,00052-474211 6 x 7/8** Steel .020” 9,00052-474811 6 x 7/8** Stainless .020” 9,00052-474218 6 x 5/8-11 Steel .020” 9,00052-474818 6 x 5/8-11 Stainless .020” 9,00052-474918 6 x 5/8-11 Steel .025" 9,00052-475218 7 x 5/8-11 Steel .020" 9,00052-475818 7 x 5/8-11 Stainless .020" 9,00052-476111 8 x 7/8** Steel .014" 9,00052-476211 8 x 7/8** Steel .020" 9,000**7/8" arbor hole - includes bushings 1/2" and 3/8"**7/8" arbor hole - includes bushings 5/8" and 1/2"pkg: individually boxed

22



KNOT TYPEFor heavy duty use, preparing metal surfaces, removing weldscales, rust, paint, slag and concrete waste.

END BRUSHES — 10/BOX


STRINGER BEAD50302 4 x 5/8-11 Steel .020" 20,000

KNOT WHEEL – STANDARD TWIST50352 4 x 5/8-11 Steel .020" 20,000

KNOT CUP BRUSH50605 23⁄4 x 5/8-11 Steel .020" 12,500

Wire WirePart # Size Type Diam.

KNOT TYPE — 20,000 RPM 50701 Steel .014"50702 3/4" Steel .020"50703 Stainless .014"50705 Steel .014"50706 1" Steel .020"50707 Stainless .014"50709 Steel .014"50710 1-1/8" Steel .020"50711 Stainless .014"

CRIMPED TYPE — 20,000 RPM50801 Steel .006"50802 1/2" Steel .014"50803 Steel .020"50805 Stainless .014"50810 Steel .006"50811 3/4" Steel .014"50812 Steel .020"50814 Stainless .014"50820 Steel .006"50821 1" Steel .014"50822 Steel .020"50824 Stainless .014"50831 Steel .014"50832 1-1/8" Steel .020"50834 Stainless .014"

HAND BRUSHES — 12/BOX

WirePart # Size Type

LONG HANDLE50201 3 x 19 Steel50203 3 x 19 Stainless50205 4 x 19 Steel50207 4 x 19 Stainless

SHOE HANDLE50209 4 x 16 Steel50210 4 x 16 Stainless

TOOTHBRUSH50211 3 x 7 Nylon50212 3 x 7 Steel50213 3 x 7 Stainless50214 3 x 7 Brass

WIRE BRUSHES




23



CERAMICA Superior Resin Fibre Disc.Our ceramic Fibre Discs are a unique combination of ceramic aluminum oxide grain, a special environmentallysafe “supersize” coat and the latest in fibre disc technology.

A more “user-friendly”High Performance Disc.The ceramic grain is extremely hard and actually sharpensitself during operation. It is easy to work with as it breaksdown with less work pressure than Zirconia, thus reducingoperator fatigue.

A fast, cool cutting, long-lastingenvironmentally safe fibre disc.The “Supersize” coat keeps the disc cool especially whengrinding hard materials such as stainless steel, inconel, etc.This special grinding aid has been developed under the strictguidelines of the European environmental restrictions and iscompletely safe for the operator and surrounding environment.

A unique High Performance Disc at very competitive prices.Our affiliated plant in Europe has specially developed this formula, invested in the latest state-of-the-art automatedequipment and is recognized as a world leader in the production of Resin Fibre Discs.

RESIN FIBRE SANDING DISCS

12518 2412519 3612520 5012521 6012522 80

Part # Grit Part # GritPart # Grit

Ceramic Fibre Discs25 Discs per Box

7" x 7/8" 5" x 7/8" 41/2" x 7/8"

12510 2412511 3612512 5012513 6012514 80

Quick Change Discs are available upon request.

12525 2412526 3612527 5012528 6012529 80

Resin FibreDisc CutterCut down your used Fibre Discsand use again. Cryogenicallytreated cutting blades for a niceclean edge cut time after time.

#12300

24



PART # SIZE

92601 9" x 5⁄8-1192602 7" x 5⁄8-1192602-6 6" x 5⁄8-1192603 5" x 5⁄8-1192604 41/2" x 5⁄8-1192605 4" x 3⁄8-24

TURBO PADSpecial “Turbo Ribs” are designed to form a layer of airbetween the pad and the fibre disc, thus providing a built-incooling effect which increases the cutting action andextending the disc life 30% to 50%. Recommended to beused with all Premium and “High Performance” discs.

Includes Disc Pad Nut

APPLICATIONS INCLUDE:— Weld Grinding— Stainless Steel Fabricators of:

• Hospital Equipment• Exercise Equipment• Restaurant Equipment• Kitchen Equipment• Dairy and Brewery Equipment• Metal Furniture• Cabinets

— Foundries

HIGH PERFORMANCE ZIRCONIAOriginal 100% Zirconia grain. These high quality discs cut faster and last longer than most other discs on themarket. High performance for grinding, deburring and polishing metals, welds and stainless steel.

Fast Stock Removal • Extremely Long Life • Cool Cutting Action

RESIN FIBRE SANDING DISCS

Part # Grit12702 2412703 3612704 5012705 6012706 80

9" x 7⁄8"Part # Grit12710 2412711 3612712 5012713 6012714 8012715 10012716 120

7" x 7⁄8"

Part # Grit

12718 2412719 3612720 5012721 6012722 8012723 10012724 120

5" x 7⁄8"Part # Grit

12725 2412726 3612727 5012728 6012729 8012730 10012731 120

41⁄2" x 7⁄8"

— Industrial and Commercial Door Mfg.— Car, Truck and Bus Mfg.— Restaurant Grills, Ovens and Ranges— Woodburning Stoves and Fireplaces— Safes, Vaults and Caskets— Computer Frames and Electrical Boxes— Material Handling Equipment Mfg.— Ornamental Iron— Shipbuilding and Repairing

Quick Change Discs areavailable upon request.

25


TURBO PADSpecial “Turbo Ribs” are designed to form a layer of air between the pad and thefibre disc, thus providing a built-in cooling effect which increases the cuttingaction and extending the disc life 30% to 50%. Recommended tobe used with all Premium and “High Performance” discs.

TO ORDER TOLL FREE CALL 1-800-237-2299 or FAX 866-672-6366

PREMIUM HT ALUMINUM OXIDEProduced by one of Europe’s largest fibre discmanufacturers, these excellent quality aluminumoxide discs are used for weld grinding,blending, finishing,deburring andother general purpose applica-tions. Can beused on mosttypes of steel aswell as fiberglassand plastics. Weuse a special heattreated (ceramic coated)aluminum oxide grain for fastcutting action and long disc life.

RESIN FIBRE SANDING DISCS25 DISCS PER BOX

Part # Grit

92110 1692111 2492112 3692113 5092114 6092115 8092116 10092117 120


92200 1692201 2492202 3692203 5092204 6092205 8092206 10092207 120


92300 1692301 2492302 3692303 5092304 6092305 8092306 10092307 120

5" x 7⁄8"Part # Grit4" x 5⁄8"

Part # Grit

92400 1692401 2492402 3692403 5092404 6092405 8092406 10092407 120

41⁄2" x 7⁄8"

92500 1692501 2492502 3692503 5092504 6092505 8092506 10092507 120

Quick Change Discs areavailable upon request.

PART # SIZE

92601 9" x 5⁄8-1192602 7" x 5⁄8-1192602-6 6" x 5⁄8-1192603 5" x 5⁄8-1192604 41/2" x 5⁄8-1192605 4" x 3⁄8-24



26



RESIN FIBRE SANDING DISCS25 DISCS PER BOX

ALUMINUM OXIDEExcellent general purpose discs for metalworking and automotiveapplications. Also for body fillers, paint, plastics and fiberglass.

Part # Grit

70100 1670101 2470102 3670103 5070104 6070105 8070106 10070107 120

9" x 7⁄8"

Part # Grit

70200 1670201 2470202 3670203 5070204 6070205 8070206 10070207 120

7" x 7⁄8"Part # Grit Part # Grit

70300 1670301 2470302 3670303 5070304 6070305 8070306 10070307 120

70400 1670401 2470402 3670403 5070404 6070405 8070406 10070407 120

Part # Grit

70500 1670501 2470502 3670503 5070504 6070505 8070506 10070507 120

5" x 7⁄8" 4" x 5⁄8"41⁄2" x 7⁄8"

STANDARD PAD

PART # SIZE

92606 9" x 5/8-1192608 7" x 5/8-1192608-6* 6" x 5/8-1192610 5" x 5/8-1192612 41/2" x 5/8-1192613 41/2" x M14 x 292616 41/2" x M10 x 1.592614 4" x 3/8-2492615 4" x M10 x 1.2592615-1.5 4" x M10 x 1.5

Smooth face Pad that is ideal for all sandingapplications. An economical choice for usewith general purpose fibre discs.

Quick Change Discs are available upon request.

27


Resin FibreDisc CutterCut down your used Fibre Discsand use again. Cryogenicallytreated cutting blades for a niceclean edge cut time after time.

#12300



QUICK CHANGE DISCSTYPE R – PLASTIC BUTTON

PREMIUM ALUMINUM OXIDE RESIN BONDExcellent quality for most general metalworking jobs.

DiscsPart# Size per Box Grade

30033 Coarse30034 2" 50 Medium30035 Very Fine30036 Coarse30037 3" 25 Medium30038 Very FineOther sizes available upon request.

SURFACE CONDITIONING DISCSSpecial reinforced, heavy duty material designed to remove rust, heavy oxidation, blending, finishing and general surfacepreparation prior to painting or plating — without changing the geometric shape of the workpiece.

Available in the following grades: A COARSE (Tan) A MEDIUM (Maroon) A VERY FINE (Blue)

PLEASE SPECIFY GRADE WHEN ORDERING.

Part # Dia.

92660 11⁄2"92661 2"92662 3"92663 4"

Blue Zirconia Discs are available upon request.

HOLDERS

Part # Grit

12918 2412919 3612920 4012921 5012922 6012923 8012924 10012925 120

2" Dia. – 100 per Box 3" Dia. – 50 per Box

GREEN ZIRCONIA WITH GRINDING AIDSpecial Zirconia grain with grinding aid for fast, cool cutting action and extended disc life.Excellent on stainless steel.

Part # Grit

12926 2412927 3612928 4012929 5012930 6012931 8012932 10012933 120

Part # Grit

12949 3612950 4012951 5012952 6012953 8012955 120


Part # Grit

12956 3612957 4012958 5012959 6012960 8012962 120

28



QUICK CHANGE DISCSTYPE S – METAL BUTTON

PREMIUM ALUMINUM OXIDE RESIN BONDExcellent quality for most general metalworking jobs.


Available in the following grades: A COARSE (Tan) A MEDIUM (Maroon) A VERY FINE (Blue)PLEASE SPECIFY GRADE WHEN ORDERING.

Part # Dia.

92670 11⁄2"92671 2"92672 3"92673 4"

Blue Zirconia Discs are available upon request.

HOLDERS

GREEN ZIRCONIA WITH GRINDING AIDSpecial Zirconia grain with grinding aid for fast, cool cutting action and extended disc life.Excellent on stainless steel.

Part # Grit

13018 2413019 3613020 4013021 5013022 6013023 8013024 10013025 120


Part # Grit

13026 2413027 3613028 4013029 5013030 6013031 8013032 10013033 120

Part # Grit

13050 3613051 4013052 5013053 6013054 8013056 120


Part # Grit

13066 3613067 4013068 5013069 6013070 8013072 120

DiscsPart# Size per Box Grade

30053 Coarse30054 2" 50 Medium30055 Very Fine30056 Coarse30057 3" 25 Medium30058 Very FineOther sizes available upon request.

29



For PSA Discs92620 5”92620L (low profile)92621 6”92621L (low profile)

For Hook & Loop92655 5”92657 6”

Part # Size

5/16" - 24 Thread

Aluminum oxide “DA” paper for use in automotive body shops,cabinet and wood shops as well as metal fabrication.Special non-loading discs work extremely well on wood, lacquers,paint, body filler and primer. Our Gold Discs provide fast cuttingaction, extended disc life and an excellent finish.

GOLD PAPER DISCS

PSA DiscsSpecial Release Paper covers and protectsthe PSA Adhesive Coating. Pull-tab makesdisc changing easier and faster.

“Hook & Loop” DiscsQuick disc changing, reusable, cushion support for a better finish.

“DA” Style Pads94663 400C94662 320C94661 240C94660 220C94659 180C94658 150C94657 120C94656 100C94655 80C94654 60C94652 40C

Part # Grit

94613 400C94612 320C94611 240C94610 220C94609 180C94608 150C94607 120C94606 100C94605 80C94604 60C94602 40C

Part # Grit

5" x NH100 Discs per Box

6" x NH 100 Discs per Box

30

94813 400C94812 320C94811 240C94810 220C94809 180C94808 150C94807 120C94806 100C94805 80C94804 60C94802 40C

Part # Grit


94824 400C94823 320C94822 240C94821 220C94820 180C94819 150C94818 120C94817 100C94816 80C94815 60C94814 40C

Part # Grit

5" x 5 Hole 100 Discs per Box

94840 400C94839 320C94838 240C94837 220C94836 180C94835 150C94834 120C94833 100C94832 80C94831 60C94830 40C

Part # Grit

5" x 8 Hole100 Discs per Box

94863 400C94862 320C94861 240C94860 220C94859 180C94858 150C94857 120C94856 100C94855 80C94854 60C94852 40C

Part # Grit


94874 400C94873 320C94872 240C94871 220C94870 180C94869 150C94868 120C94867 100C94866 80C94865 60C94864 40C

Part # Grit

6" x 6 Hole100 Discs per Box



PSA CLOTH DISCSALUMINUM OXIDE RESIN BOND CLOTH

Aluminum Oxide Resin Bond Cloth that is versatile for metal, plastic and woodworkingapplications. Our advanced “Hot Melt” PSA Coating System enables the disc to operateat high speeds and resist high temperatures for maximum performance without flying off.They are more economical than expensive mechanical lock-on discs and provide alonger shelf life than conventional self-adhesive discs.

PULL TABS are standard with 5" and 6" diameter discs.

31

“HIGH PERFORMANCE” ALUMINA ZIRCONIA POLYESTER CLOTHAggressive Cutting Action, Heavy and Fast Stock Removal and Long Disc Life are the main characteristics of this product.The self sharpening zirconia grain is coated to a heavy duty polyester cloth backing. For serious “hogging” of most typesof material. Excellent on stainless steel.

SIZE 180 150 120 100 80 60 50 40 36 24

5”* 94109 94108 94107 94106 94105 94104 94103 94102 94101 941006”* 94209 94208 94207 94206 94205 94204 94203 94202 94201 942008”+ 94309 94308 94307 94306 94305 94304 94303 94302 94301 9430010”+ 94409 94408 94407 94406 94405 94404 94403 94402 94401 9440012”+ 94509 94508 94507 94506 94505 94504 94503 94502 94501 94500

Pkg: *50 Discs per Box + pkg: 25 per Box

OTHER SIZES AVAILABLE:

SIZE MIN. PKG.

2” 1003” 504” 50

SIZE MIN. PKG.

7” 259” 2514” 25

SIZE MIN. PKG.

15” 1016” 1018” 10

SIZE MIN. PKG.

20” 1024” 530” 5

SIZE 120 100 80 60 50 40 36 24

5”* 94527 94526 94525 94524 94523 94522 94521 945206”* 94537 94536 94535 94534 94533 94532 94531 945308”+ 94547 94546 94545 94544 94543 94542 94541 9454010”+ 94557 94556 94555 94554 94553 94552 94551 9455012”+ 94567 94566 94565 94564 94563 94562 94561 94560

Pkg: *50 Discs per Box + pkg: 25 per Box Other Sizes Available Upon Request.

PART NUMBERS

PART NUMBERS



31⁄2" x 11⁄2" x 5⁄8" 40-60-80 10120-180-240

4" x 1" x 5⁄8" 40-60-80120-180-240 10

40-60-806" x 1" x 1" 120-180-240 10

6" x 11⁄2" x 1" 40-60-80120-180-240 10

6" x 2" x 1" 40-60-80120-180-240 10

SIZE GRITWHEELS

DIA. x WIDTH x A.H.PERUNIT

SIZE GRITWHEELS

DIA. x WIDTH x A.H.PERUNIT

UNMOUNTED FLAP WHEELS AVAILABLE

FLAP WHEELS ARE AVAILABLE WITH NON-WOVENABRASIVE — CALL FOR PRICE.

All wheels have solid steel 1/4" shank. Quick change wheels with 1/4-20 male thread available upon request.Other sizes and grits available upon request.

8" x 1" x 1" 40-60-80 3120-180-240

8" x 2" x 1" 40-60-80 3120-180-240

10" x 1" x 13⁄4" 40-60-80 2120-180-240

10" x 2" x 13⁄4" 40-60-80 2120-180-240

Part # Grit

93570 4093571 6093572 8093573 12093574 180

Part # Grit

93510 4093511 6093512 8093513 12093514 180

1" x 5/8" 1" x 1" 11/2" x 1/2" 11/2" x 1"

Part # Grit

93534 4093536 6093537 8093538 12093535 180

2" x 1/2" 2" x 1" 21/2" x 1/2" 21/2" x 1"

3" x 1/2" 3" x 3/4" 3" x 1" 3" x 2"

Part # Grit

93505 4093506 6093507 8093508 12093509 180

Part # Grit

93543 4093539 6093540 8093541 12093542 180

Part # Grit

93553 4093554 6093555 8093556 12093557 180

Part # Grit

93521 4093522 6093523 8093524 12093526 180

Part # Grit

93530 4093531 6093532 8093533 12093529 180

Part # Grit

93515 4093516 6093517 8093518 12093519 180

Part # Grit

93580 4093581 6093582 8093583 12093584 180

Part # Grit

93500 4093501 6093502 8093503 12093504 180

Part # Grit

93575 4093576 6093577 8093578 12093579 180

FLAP WHEELSFor blending and finishing of all types of steel, stainless steel, aluminum and othernon-ferrous as well as plastics, acrylics and wood. All wheels are made of aluminumoxide resin bond cloth for a controlled cut and uniform finish through-out the entirelife of the wheel. They are used for quick stock removal, light deburring, cleaningwelds, removing rust and other surface imperfections.

MOUNTED FLAP WHEELS

32



31500 4031501 6031502 8031503 120

Part # Grit

FLAP WHEELS

All Flap Wheels are stocked with standard 1/4" shank.

1" x 1" - 100/Box

31510 4031511 6031512 8031513 120

2" x 1" - 50/Box

31521 4031522 6031523 8031524 120

3" x 1" - 25/Box

31505 4031506 6031507 8031508 120

11/2" x 1" - 50/Box

31515 4031516 6031517 8031518 120

21/2" x 1" - 50/Box

31526 4031527 6031528 8031529 120

3" x 2" - 25/Box




Aluminum Oxide Cloth Flaps for blending,finishing and deburring all types of metal.

33

Part # Grit Part # Grit

Part # Grit Part # Grit Part # Grit

UNMOUNTED

FLAP WHEELS

31550 4031551 6031552 8031553 120

Part # Grit

6" x 1" x 1"

31558 4031559 6031560 8031561 120

6" x 2" x 1"

31554 4031555 6031556 8031557 120

6" x 11/2" x 1"Part # Grit Part # Grit

MOUNTED FLAP WHEELS



34

CLOTH SANDING BELTSAll of our Sanding Belts are designed to do the job at hand. We have many different types ofmaterial each for its own application.PREMIUM ALUMINUM OXIDE X WT. CLOTH (Grits 24-400)

Our general purpose material for all medium to heavy duty metalworking applications.Quick stock removal with excellent finishing characteristics.

PREMIUM ALUMINUM OXIDE X WT. CLOTH OPEN COAT (Grits 24-120)Excellent for grinding leather (shoe repair), wood, aluminum and plastic applications whereloading is a problem.

PREMIUM ALUMINUM OXIDE J WT. CLOTH (Grits 60-500)Our J wt. cloth is a full resin bonded closed coated A/O grain on a flexible jeans backing.It is to be used on a broad range of medium grinding and sanding application. The flexible backing is also suitable for all profiled work pieces.

PREMIUM ALUMINUM OXIDE Y WT. POLYESTER CLOTH (Grits 24-400)Outperforms the competition! Heat treated aluminum oxide grain for fast cutting action and long life. The heavy duty polyester backing allows belts to be run wet or dry. Excellent for wide belts!

PREMIUM ALUMINUM OXIDE Y WT. POLY CLOTH OPEN COAT (Grits 24-320)An antistatic abrasive cloth for most woodworking applications. The special Y wt. polyesterbacking enables the belts to be washed and used over again.

ALUMINA ZIRCONIA Y WT. POLYESTER CLOTH (Grits 24-120)A must for all heavy grinding applications. A special self-sharpening abrasive grain is coatedto a heavy duty Y wt. polyester cloth backing with heat resistant resins. A very fast cutting,long lasting belt material for most tough metals. The belts can be used wet or dry.

ALUMINA ZIRCONIA Y WT. POLYESTER CLOTH WITH GRINDING AID (Grits 24-120)Excellent for stainless. Special grinding aid dissipates the frictional heat build up, thusenabling the belt to stay cool and keep working way beyond when most others quit.

SILICON CARBIDE WATERPROOF CLOTH (Grits 24-600)Extra sharp silicon carbide grain that is made to grind hard and abrasive surfaces such as glass, fiberglass, granite, marble and stone. Can also be used on plastics, ceramics, ferrous and non-ferrous metals, copper and brass. Belts can be used wet or dry.

CORK POLISHING CLOTHThis material is used to remove scratches and surface imperfections in glass. For maximum performance and optimum results, our Cork Polishing belts should be used wet.

CERAMIC Y WT. POLYESTER CLOTH WITH GRINDING AID (Grits 24-120)100% ceramic grain that is extremely hard and actually sharpens itself during operation. The ceramic grain is easy to work with as it breaks down with less work pressure than zirconia, thus reducing operator fatigue. Environmentally safe “supersize coat” or grinding aid keeps the belts cool when grinding hard materials such as stainless steel, iconel, etc. with no harmful fumes or odors.

ADVANTAGE ALUMINUM OXIDE X WT. CLOTH (Grits 24-400)Excellent quality aluminum oxide resin bond cloth sanding belts for metalworking, woodworking and other MRO and general purpose applications. The Economical Choice! Designed specifically for sanding jobs where value is the deciding factor.

ADVANTAGE ALUMINA ZIRCONIA X WT. CLOTH (Grits 24-120)Super tough self sharpening Zirconia grain coated to an X wt. cloth backing formost metal working jobs. Belts must be used dry. The Economical Choice!Designed specifically for sanding jobs where value is the deciding factor.

WE CAN MAKE ANY SIZE BELTS.



35

CLOTH SANDING BELTSSTANDARD SIZE CLOTH SANDING BELTS

Listed below are several of the most popular sizes:

Size1/4 x 181/4 x 243/8 x 131/2 x 12

Size1/2 x 181/2 x 243/4 x 183/4 x 20 1/2

Size

1 x 121 x 18 15/16

1 x 30

Portable Airfile Belts

Size

3 x 183 x 213 x 24

Size

3 1/2 x 15 1/2

4 x 214 x 24

Portable Belts

Size

1 x 421 x 601 x 72

1 1/2 x 60

Size

2 x 482 x 602 x 72

Size

2 1/2 x 482 1/2 x 602 1/2 x 72

Size

4 x 364 x 546 x 486 x 60

Benchstand Belts

Size

1 x 1321 1/2 x 1321 1/2 x 168

2 x 902 x 1182 x 1202 x 1322 x 168

Size

2 1/2 x 1322 1/2 x 1482 1/2 x 168

3 x 903 x 1183 x 1203 x 1323 x 168

Size

4 x 904 x 1064 x 1184 x 1204 x 1324 x 1686 x 906 x 1326 x 168

Size

8 x 1078 x 1329 x 489 x 609 x 120

10 x 70 1/2

12 x 144

Backstand & Offhand Belts

Size

18 x 8519 x 4824 x 4824 x 60

Size

25 x 4825 x 6025 x 7530 x 103

Size

36 x 6036 x 7537 x 6037 x 75

Size

50 x 7550 x 10352 x 7552 x 103

Wide Belts

WE CAN MAKE ANY SIZE BELTS.



36

CLOTH SANDING BELTS

Part # Size Grit

90106 100X*90105 80X90104 1 x 42 60X90103 50X90102 40X90101 36X

90806 100X*90805 80X90804 2 x 48 60X90803 50X90802 40X90801 36X

90826 100X*90825 80X90824 2 x 60 60X90823 50X90822 40X90821 36X

90846 100X*90845 80X90844 2 x 72 60X90843 50X90842 40X90841 36X

90906 100X*90905 80X90904 21⁄2 x 60 60X90903 50X90902 40X90901 36X

90206 100X*90205 80X90204 3 x 18 60X90203 50X90202 40X90201 36X

Part # Size Grit

90306 100X*90305 80X90304 3 x 21 60X90303 50X90302 40X90301 36X

90406 100X*90405 80X90404 3 x 24 60X90403 50X90402 40X90401 36X

90506 100X*90505 80X90504 4 x 24 60X90503 50X90502 40X90501 36X

90606 100X*90605 80X90604 4 x 36 60X90603 50X90602 40X90601 36X

90626 100X*90625 80X90624 4 x 54 60X90623 50X90622 40X90621 36X

90706 100X*90705 80X90704 6 x 48 60X90703 50X90702 40X90701 36X

The Advantage brand is an internationalselection of coated and bonded abrasiveproducts, wire brushes and diamond bladesdesigned for general purpose applicationswhen primary concerns are low costs, consistent quality and good value.

*100x & Finer includes grit sizes: 400-320-240-220-180-150-120 (All x wt. Backing)

Excellent quality aluminum oxide resin bond cloth sanding belts for metalworking, woodworking and other MRO and general purpose applications.

The Economical Choice! Designed specifically forsanding jobs where value is the deciding factor.



37

9 X 11* SANDPAPER SHEETS

Part # Grit Min. Pkg. Sheets perUnit

15316 800A-2000A** 100 50015310 220A-600A* 100 50015209 180C 100 50015208 150C 100 50015207 120C 100 50015206 100C 100 50015205 80C 100 50015204 60C 100 500

**220A includes Grit Sizes: 600-500-400-320-240 (All “A” wt. Backing)**800A-2000A includes Grit Sizes: 2000-1500-1200-800 (All “A” wt. Backing)

*100A & Finer includes Grit Sizes: 400-320-240-220-180-150-120 (All “A” wt. Backing)

ALUMINUM OXIDE PAPERThis product is available with (2) types of paper backing. The C & D wt.sheets are a heavier paper used for rapid stock removal with minimumloading and glazing. The A wt. paper is for fine finishing and contoursanding. Both products are used for woodworking, plastics, metal andpainted metal surfaces.

GARNET PAPERGarnet is a natural, mined abrasive grain that is primarily used in the furni-ture and woodworking industries. Our garnet paper is also available with (2)types of paper backing. The C & D wt. paper is for medium stock removaland some finishing work while the A wt. is used primarily for fine finishing.

*100A & Finer includes Grit Sizes: 320-240-220-180-150-120 (All “A” wt. Backing)

SILICON CARBIDENON-LOADING PAPERFor medium to light sanding of painted metal and wood surfaces. The “A”wt. backing will conform for contour sanding and should only be used dry. The special coating minimizes loading, thus increasing the life and performance of the product.

SILICON CARBIDEWATERPROOF LATEX PAPERCan be used dry, but are most effective in wet applications. The combina-tion of the full resin bond, the “anti-slip” waterproof latex paper backingand the sharp S/C grain produces a superior quality product for polishingmetallurgical specimens, glass, stone, marble, general metal finishing,applying scratch patterns to metal, plastics, fiberglass or between coats of paint or primer.


15706 100A & Finer* 100 100015705 80A 50 50015608 150C 100 100015607 120C 100 100015606 100C 100 100015605 80D 50 50015604 60D 50 50015603 50D 50 50015602 40D 50 500


15906 100A & Finer* 100 100015905 80A 50 50015808 150C 100 100015807 120C 100 100015806 100C 100 100015805 80D 50 50015804 60D 50 50015803 50D 50 50015802 40D 50 500

*100A & Finer includes Grit Sizes: 320-240-220-180-150-120 (All “A” wt. Backing)


15006C 100A & Finer* 100 100015005C 80A 100 1000


15106 100J & Finer* 50 50015105 80J 50 50015104 60J 50 50015103 50J 50 50015102 40J 50 50015101 36J 50 500

*100J & Finer includes Grit Sizes: 400-320-240-220-180-150-120 (All “J” wt. Backing)

ALUMINUM OXIDE METAL CLOTHThese sheets are made of premium aluminum oxide grain coated to a flexi-ble “J” wt. cloth backing with urea resins. They are ideal for hand or powersanding of metals, plastics, woods and most other types of materials.

9 X 11 CLOTH SHEETS

EMERY CLOTHEmery is a natural or mined abrasive that is not hard enough for productiongrinding of metal products. Emery Cloth is generally black in color and isused for general maintenance, light cleaning and polishing of metal surfaces.


15122 Fine 50 50015121 Medium 50 50015120 Coarse 50 50015119 Extra Coarse 50 500

CROCUS CLOTHCrocus is finely ground iron oxide particles used to clean and polish metal surfaces, with a minimum amount of stock removal.


15125 Fine 50 500

SANDSCREEN SHEETS


15156 320 50 50015153 150 50 50015152 120 50 50015151 100 50 50015150 80 50 50015149 60 50 500

*CUTSHEETSThe following Cut Sheets

are available:

41⁄2 x 11 41⁄2 x 51⁄232⁄3 x 9

OTHER SIZES AVAILABLEUPON REQUEST.



38

RESIN BOND SHOPROLLSDurable Aluminum Oxide Grain coated to a flexible “J” wt. Cloth backing that tears easily and conforms to theworkpiece. Resin Bonding System enables material to be used dry or in conjunction with oil, cutting fluids andlubricants. Water Resistant!

*11⁄2" x 25 yd. *2" x 25 yd.PART # GRIT

91345 18091343 12091341 80

SANDSCREEN ROLLSSilicon Carbide, waterproof mesh material for sanding pvc pipe and other plumbing applications.

Non-loading • washable • re-usable

*91325 2" x 50 yd.

PART # GRIT

91355 18091353 12091351 80

CROCUS CLOTH ROLLS

*Other sizes and grits available upon request.




1" x 50 yd.PART # GRIT

91113 400J91112 320J91111 240J91110 220J91109 180J91108 150J91107 120J91106 100J91105 80J91104 60J91103 50J91102 40J

PART # GRIT

91213 400J91212 320J91211 240J91210 220J91209 180J91208 150J91207 120J91206 100J91205 80J91204 60J91203 50J91202 40J

11⁄2" x 50 yd. 2" x 50 yd.PART # GRIT

91313 400J91312 320J91311 240J91310 220J91309 180J91308 150J91307 120J91306 100J91305 80J91304 60J91303 50J91302 40J



39

SHOPROLLSSUPERFLEX

21⁄2" 103" 84" 66" 4

WIDTH ROLLSPER UNIT

ALUMINUM OXIDE CLOTH ROLLSRESIN BOND UTILITY CLOTH

Available grit sizes: 400-320-240-220-180-150-120-100-80-60-50-40.Other size rolls available upon request

“X” WT. RESIN BOND METAL CLOTH

Available grit sizes: 320-240-220-180-150-120-100-80-60-50-40-36. Other size rolls available upon request

WIDTH ROLLSPER UNIT

2" 103" 84" 66" 4

PART # GRIT

21216 600J21213 400J21212 320J21211 240J21210 220J21209 180J21208 150J21207 120J21206 100J21205 80J21204 60J

1" x 50 yd. 11⁄2" x 50 yd. 2" x 50 yd.PART # GRIT

21116 600J21113 400J21112 320J21111 240J21110 220J21109 180J21108 150J21107 120J21106 100J21105 80J21104 60J

PART # GRIT

21316 600J21313 400J21312 320J21311 240J21310 220J21309 180J21308 150J21307 120J21306 100J21305 80J21304 60J

Perhaps the best shop roll in the world! The difference between SUPER-FLEX and other shop rolls is the cloth backing. Only the highest quality clothis used to produce SUPERFLEX rolls. SUPERFLEX is woven much tighter and hasmore density than any other shop roll on the market. This enables SUPERFLEX to be stretchedand twisted without fear of snapping or cracking. Each roll is triple flexed to provide the user with the highest degree of flexibilitypossible with a coated abrasive cloth. Tears lengthwise without fraying for mold and die polishing.

Our Advanced Resin Bonding System (Full Resin over Resin) ensures retention of the premium aluminum oxide grain even after extensive flexing.

Applications include: machine shops, tool & die, aviation maintenance, plumbing and general cleaning and degreasing of parts.

Durable Aluminum Oxide grain coated to a flexible “J” wt. cloth backing that tears easily and conformsto the workpiece. Resin bonding system enables rolls to be used dry or in conjunction with oil, cutting fluids and lubricants. Water resistant!

An economical choice for medium sanding applications.Aluminum Oxide grain, phenolic resins and a heavy “X” wt. clothbacking are combined to produce a quality abrasive for portablebelts, discs, sheets and roll sanding jobs.



40

29997 S Med Black 7446 10 6029999 Non-Abrasive White 7445 20 6030000 G GP Green – 10 6030001 A VF Maroon 7447 10 6030002 S UF Grey 7448 20 6030003 Extra Cut Tan 7440 10 60

NON-WOVEN ABRASIVES6 x 9 HAND PADSOur three dimensional abrasive pads are to be used for surface preparation, blending and finishing. They can be used by hand or with oscillating sanders and are made for metal, plastic or woodworking industries. Ourhand pads can be used dry or with water, detergents, polishes, waxes or light oils as a lubricant.

A VF (Maroon) Aluminum Oxide Very Fine S UF (Grey) Silicon Carbide Ultra Fine— Replaces 3M #7447 — Replaces 3M #7448— Most Common Pad Used — Due to its Fine Abrasive Content, they are ideal for— Removing Rust, Corrosion, Light Oxidation and applying a Scratch Pattern on Stainless and Aluminum.

Discoloration — To Scratch between Coat of Paints, Primer or Varnish— Blending & Finishing Stainless Steel — For Final Surface Preparation— General Cleaning Jobs— Light Deburring— Degreasing Machine Parts— Hand Cleaning Printed Circuit Boards

EXTRA CUT (Tan) Aluminum Oxide Coarse— Replaces 3M #7440— Cut and Polish— Heavy Duty Construction— More Aggressive Cutting Action— For Surface Preparations of all types

Replaces Pads PadsPart# Type Color 3M # per Pkg. per Case

Other Grades available upon request.

30230 2"30231 3"

Part # Size

Type R - QC Discs10/Box

30250 41⁄2 x 7⁄830250H 41⁄2 x 5⁄8-1130253 7 x 7⁄830253H 7 x 5⁄8-11

Part # Size

TYPE 27Discs with Fiberglass Backing

for use on Angle Grinders10/Box

30222 4 x 1⁄230223 6 x 1⁄230224 8 x 1⁄2

Part # Size

Disc Wheels10/Box

SUPER STRIP DISCSHeavy duty discs designed to rapidly clean welds, remove scale, rust, paint, grease or oil without loading orclogging. Fast cutting action. Long disc life. For use on all types of surfaces.






41

THE FOLLOWING BELTS ARE AVAILABLE FROM STOCK:

PLEASE SPECIFY GRADE WHEN ORDERING.

SURFACE CONDITIONING BELTSSpecial reinforced, heavy duty material designed to remove rust,heavy oxidation, blending, finishing and general surface preparationprior to painting or plating — without changing the geometric shape of the workpiece.

Available in the following grades:

NON-WOVEN ABRASIVES

Part # Size Grit

30101 Coarse30102 1⁄4 x 18 Medium30103 Very Fine





30120 Coarse30121 3⁄4 x 201⁄2 Medium30122 Very Fine

30123 Coarse30124 1 x 30 Medium30125 Very Fine

Part # Size Grit





30140 Coarse30141 31⁄2 x 151⁄2 Medium30142 Very Fine



Other popular sizes available:

Belt Size

2 x 602 x 722 x 132

Belt Size

21⁄2 x 4821⁄2 x 60

3 x 132

Belt Size

4 x 364 x 544 x 132

A COARSE (Tan)A MEDIUM (Maroon)A VERY FINE (Blue)

We can make any size Belts — Call for Price.



42

Part# Size Grade

30025-78 Coarse30026-78 41⁄2 x 7⁄8 Medium30027-78 Very Fine30013-78 Coarse30014-78 5 x 7⁄8 Medium30015-78 Very FineOther sizes available upon request.


Available in the following grades: A COARSE (Tan) A MEDIUM (Maroon) A VERY FINE (Blue)PLEASE SPECIFY GRADE WHEN ORDERING.

NON-WOVEN ABRASIVES

QUICK CHANGE TYPE Type R – Plastic Button Type S – Metal Button

VELCRO® TYPE SURFACE CONDITIONING DISCS(For Use With “Gripper” Pads)

SURFACE CONDITIONING DISCS with a Hole(For Use With Angle Grinders/Sanders)

SURFACE CONDITIONING FLAP DISCSLayers of surface conditioning material for surface prep

10 DISCS PER BOX

Part# Grade Discs per Box

30271 Coarse 1030272 Medium 10

41⁄2 x 7⁄8Part# Grade Discs per Box

30271H Coarse 1030272H Medium 10

41⁄2 x 5⁄8-11

Part # DiscsType R Type S Size per Box Grade

30033 30053 Coarse30034 30054 2" 50 Medium30035 30055 Very Fine92661 92671 2" Holder - $4.2930036 30056 Coarse30037 30057 3" 25 Medium30038 30058 Very Fine92662 92672 3" Holder - $4.79

Discs Part# Size per Box Grade

30004 Coarse30005 2" 50 Medium30006 Very Fine30007 Coarse30008 3" 25 Medium30009 Very Fine30010 Coarse30011 4" 10 Medium30012 Very Fine30025 Coarse30026 41⁄2" 10 Medium30027 Very FineOther size discs available — Call for Price.


30013 Coarse30014 5" 10 Medium30015 Very Fine30016 Coarse30017 6" 10 Medium30018 Very Fine30019 Coarse30020 7" 10 Medium30021 Very Fine30022 Coarse30023 8" 10 Medium30024 Very Fine


30025HD-78 Coarse30026HD-78 10 MediumOther sizes available upon request — Call for Prices.

30013HD-78 Coarse30014HD-78 10 Medium30019HD-78 Coarse30020HD-78 10 Medium

HD SURFACE CONDITIONING DISCS with a Hole(For Use With Angle Grinders/Sanders)

Cross Section Photo of Special "Gripper Hooks"

GRIPPER PADSDesigned exclusively for use with non-woven surface conditioning discs.Special “Gripper Hooks” or anchor-shaped velcro used for superior holdingpower over other conventional pads. Gripper Pads are available for use with“DA” Sanders or for use with all grinders/sanders that have a 5⁄8-11 threadedspindle. Specially designed hub that actually fits wrench. Safe and easy to install.

DiscsPart # Size per Box Grade

30033HD Coarse30034HD 2" 50 Medium92661 2" Holder30036HD Coarse30037HD 3" 25 Medium92662 3" Holder

HD SURFACE CONDITIONING DISCSHigh performance surface conditioning discs that cut faster, last longerand provide a better finish than conventional discs.• Fast Stock Removal• Long Disc Life• Excellent Finishes

NON-WOVEN ABRASIVESHEAVY DUTY CERAMIC

HD Type R QUICK CHANGE DISCS

HD VELCRO® TYPE SURFACE CONDITIONING DISCS(For Use With “Gripper” Pads)

41⁄2 x 7⁄8 5 x 7⁄8

7 x 7⁄8


30010HD Coarse30011HD 4" 10 Medium30025HD Coarse30026HD 41/2" 10 MediumOther size discs available — Call for Price.


30013HD Coarse30014HD 5" 10 Medium30019HD Coarse30020HD 7" 10 Medium

PART # SIZE

92640 2" x 1⁄4 Shank92641 3" x 1⁄4 Shank92648 8" x 5⁄8-1192647 7" x 5⁄8-1192646 6" x 5⁄8-1192645 5" x 5⁄8-1192649 41⁄2" x 5⁄8-1192644 4" x 5⁄8-11


43





44

CERAMICMultiple layers of heavy duty ceramic grain that are designedfor super fast stock removal and extremely long disc life.

Our ceramic flap discs are not designed to be used for quick intervals; these super tough industrial grade discs must be used for extended periods of time in order for the discs to heat up and reach their full potential. Watch the sparks fly!

41/2" x 7⁄8"Part #

Type 27 Type 29 Grit

96501 96511 3696502 96512 4096504 96514 6096505 96515 80

41/2" x 5⁄8" -11

FLAP DISCS

TURBO - TRIMMABLESpecial composite (plastic) backing design thatcan actually be trimmed to expose unused flapsfor extended disc life.

Backing will not mark up workpiece.

Multiple layers of our poly-cottonzirconia flaps that provide fastercutting action and long disc life,especially when using coarse gritslike 36 and 40.

Part #Type 27 Type 29 Grit

96501H 96511H 3696502H 96512H 4096504H 96514H 6096505H 96515H 80

41/2" x 7⁄8"Part # Grit

96371 3696372 4096374 6096375 80

41/2" x 5⁄8" -11Part # Grit

96371H 3696372H 4096374H 6096375H 80

Trim PlasticEdge to

Increase Disc Life


41⁄2" x 7⁄8"Part # Part #

Type 27 Type 29Flat Angle Grit

76100 76110 2476101 76111 3676102 76112 4076104 76114 6076105 76115 80

41⁄2" x 5⁄8"-11Part # Part #


76100H 76110H 2476101H 76111H 3676102H 76112H 4076104H 76114H 6076105H 76115H 80

HIGH PERFORMANCE PLUS

POLY-COTTON ZIRCONIA

High performance construction but made with supertough poly-cotton zirconia material that is designedfor a faster cut and longer disc life.

OTHER SIZES AND GRITS AVAILABLE – CALL WITH YOUR REQUIREMENTS

HIGH DENSITY – JUMBOPOLY-COTTON ZIRCONIA

A special design with 20% more flaps! Zirconia Cloth Flapsare made with extra tough Polyester/Cotton Cloth Backing that provides faster cutting action and long disc life, especially when using the coarser grits like 36 and 40.

ZIRCONIA FLAP DISCSPOLY-COTTON ZIRCONIA


45

41⁄2" x 7⁄8"Part # Part #


76401 76411 3676402 76412 4076404 76414 6076405 76415 80

41⁄2" x 5⁄8"-11Part # Part #


76401H 76411H 3676402H 76412H 4076404H 76414H 6076405H 76415H 80



Multiple layers of Zirconia cloth flaps constantly expose new sharp points to the work surface. These flaps are laminated by state-of-the-art automated equipment to a reinforced fiberglass backing that wears with the flaps and will not damage the workpiece. This enables the operator the use of the entire disc for a greater efficiency. Each disc is balance tested and will not vibrate, providing a smooth cutting, long lasting sanding tool.

Flap discs eliminate the old 2 step process by grinding andblending/finishing at the same time.

HIGH PERFORMANCE BLUEThe ultimate performer! Best cost per grind ratio on the market. 20%more flaps than our original design. For metal, steel and stainless steel.

7" x 7⁄8"Part # Part #

Type 27 Type 29Flat Grit Angle

96200 24 9621096201 36 9621196202 40 9621296204 60 9621496205 80 9621596207 120 96217

41/2" x 7⁄8"Part # Part #


96100 24 9611096101 36 9611196102 40 9611296104 60 9611496105 80 9611596107 120 96117

7" x 5⁄8"-11 HubPart # Part #


96200H 24 96210H 96201H 36 96211H96202H 40 96212H96204H 60 96214H96205H 80 96215H96207H 120 96217H

41/2" x 5⁄8"-11 HubPart # Part #


96100H 24 96110H 96101H 36 96111H96102H 40 96112H96104H 60 96114H96105H 80 96115H96107H 120 96117H



96152 40 9616296154 60 9616496155 80 96165



96122 40 9613296124 60 9613496125 80 96135

ZIRCONIA FLAP DISCS


46


41⁄2" x 7⁄8"Part # Part #


76602 76612 4076604 76614 6076605 76615 80

41⁄2" x 5⁄8"-11Part # Part #


76602H 76612H 4076604H 76614H 6076605H 76615H 80

41⁄2" x 7⁄8"Part # Part #


77101 77111 3677102 77112 4077104 77114 6077105 77115 80

41⁄2" x 5⁄8"-11Part # Part #


77101H 77111H 3677102H 77112H 4077104H 77114H 6077105H 77115H 80



76802 76812 4076804 76814 6076805 76815 80

7" x 5⁄8"-11Part # Part #


76802H 76812H 4076804H 76814H 6076805H 76815H 80

UTILITYOur original design for price conscience customers.High quality zirconia flaps, made with 100% cotton cloth backing, outperform many other brands. Good cutting action, long disc life andexcellent finish. GREAT VALUE!


HIGH DENSITY — JUMBO




Multiple layers of Zirconia cloth flaps constantly expose new sharp points to the work surface.These flaps are laminated by state-of-the-art automated equipment to a reinforced fiberglassbacking that wears with the flaps and will not damage the workpiece. This enablesthe operator the use of the entire disc for a greater efficiency. Each disc is balancetested and will not vibrate, providing a smooth cutting, long lasting sanding tool.

Flap discs eliminate the old 2 step process by grinding and blending/finishingat the same time.

ZIRCONIA FLAP DISCS

High quality zirconia flaps made with 100% cotton backing.


47



48

Excellent finishing Tool!Layers of our special reinforced surfaceconditioning material designed to removerust, heavy oxidation, blending, finishingand general surface preparation prior topainting or plating – without changing thegeometric shape of the workpiece.

SURFACE CONDITIONING

Part# Grade

30271 Coarse30272 Medium

41/2" x 7⁄8" 41/2" x 5⁄8"–11Part# Grade

30271H Coarse30272H Medium

MINI QUICK CHANGE• Multiple layers of zirconia cloth flaps

that constantly expose new sharp pointsto the work surface.

• Grind and blend workpiece in one operation.

• Type R Quick Change button allows discsto spin on/off for easy disc changing andreduces operator downtime.

• Small diameter discs enable the operatorsaccess to “hard to reach” areas.

• Outlasts traditional QC Discs at least 30:1.

Part# Grit

96401 3696402 4096404 6096405 8092661 2” Holder

2" Dia. – 50 per Box

Part# Grit

96411 3696412 4096414 6096415 8092662 3” Holder

3" Dia. – 25 per Box

FLAP DISCS



49

POWER TWISTER DIAMOND BLADE

Max.Part # Size RPM

62011 7 x 7/8" (5/8") 850062012 12 x 1 660062013 12 x 20mm 660062014 14 x 1 546062015 14 x 20mm 546062016 16 x 1 480062017 16 x 20mm 4800

POWER BLADESA COLLECTION OF SPECIALTY CUTTING BLADES FOR MANY APPLICATIONS

POWER RIPPER DEMOLITION BLADEHeavy Duty Tungsten Carbide blade RIPS through wood,metal, and plastic!

• Low number of carbide teeth and soft carbide tips ensure fast and safe cutting

# of Max.Part # Size Teeth RPM

62052 12 x 1 24 660062053 12 x 20mm 24 660062054 14 x 1 24 546062055 14 x 20mm 24 5460

ALUMINUM CUTTING TUNGSTEN CARBIDE BLADESpecial TCT Blade designed to cut aluminum.


62073 37⁄8" (98mm) x 3mm x 3⁄8 20 13,80062082 41⁄2" x 2mm x 7⁄8 20 12,70062093 5" x 4mm x 7⁄8 30 10,700

OTHER SIZES AVAILABLE UPON REQUEST

UTC UNIVERSAL TUNGSTEN CARBIDE BLADEThe universal circular saw blade that does it all!!!

• Cuts solid wood, veneer, plywood, nail embedded wood,MDF, laminates, plastic tubes, metal tubes, pipes, mediumsteel, iron, angle iron, tin, copper, brass, aluminum


62061 61⁄2 x� (7⁄8", 5⁄8") 24 700062062 71⁄4 x� (7⁄8", 5⁄8") 48 600062063 8 x� (7⁄8", 5⁄8") 48 600062064 10 x 1 (7⁄8", 5⁄8") 54 560062065 12 x 1 (7⁄8", 5⁄8") 60 480062066 14 x 1 (7⁄8", 5⁄8") 90 3800

Unique long lasting blade cuts quickly through steel and concrete!• Cuts steel guard rail, iron, ductile/cast iron, railroad tracks, motor

blocks, auto bodies, reinforced and non-reinforced concrete, and building materials.

Used by Fire Depts. and Rescue Squads nationwide.

For use with Power Hand Saws and High Speed Gas Powered Saws.

For use with High Speed Gas Powered Saws.

For use with Power Hand Saws,Mitre Saws and Table Saws.

For use with Die and Angle Grinders.


#2010

Distributed By:

10221 SWEET VALLEY DRIVEP.O. Box 25065CLEVELAND, OHIO 44125


917190randcvr.qxp:p 2/23/10 8:46 pm page 2 #2010 · 2 zirconia (type 27) hp zirconia (type 27) max....

Documents