p-316 series 'ef' vertical pumps - microsoft 'ef' vertical pumps 2900 macarthur...
TRANSCRIPT
2MNPT
2 7/8"(73)
H
OPT DISCHARGEPIPE ASSEMBLY
11 1/8"(282)
3 7/16" (CPVC)(87)2 5/8 (PP)(67)
1"
14 1/8"(359)
3FNPT
3/4FNPT
2MNPT
8 1/4"(210)
9 3/4"(248)
BOTTOM VIEW
20"(508)
17 7/8"(454)
7 1/2"( 191)
8"(204)
15"(381)
Ø13"(330)
ROTATION
10"(254)
Min Level
Voltage HP (kW) Dimensions: in. (mm)
H 208-230/460/3/60
3450 rpm 7.5 (5.5)
10/15 (7.5/11) 15-5/16 (389) 18-3/8 (467)
208-230/460/3/60 1725 rpm 7.5 (5.5) 15-9/16 (395)
220/380/440/3/50 190/380/3/50
2850 rpm
7.5 (5.5) 10/15 (7.5/11)
15-9/16 (395) 18-3/8 (467)
220/380/440/3/50 1450 rpm 7.5 (5.5) 15-9/16 (395)
Dimensions are for reference only. * Motor dimensions will vary with motor manufacturer.
GPM
LPM
0
20
40
5
10
15
20
25
30
35
40
60
80
100
120
140
160
180
200FTM
TDH
50Hz
60Hz
43
21
65 2
54
10
15
6
8
10
50Hz60HzHP
50 Hz only
6
4
3
2
5
1
200 400 600 800 1000 1200
500 100 100 200 250 300 350 400
400 U.S. GPM or 170 ft. TDH @ 60Hz
Non-metallic solution contactHigh-temp PP, CPVC, or PVDF(See chemical resistance guide T-102)
Centrifugal Quiet & vibration free.
Chemical Duty Motor (7.5-15.0 Hp.)Sealed oversized bearings,cast iron end bells, corrosion resistant two -part coating, & stainless steel nameplate. PTFE shaft vapor seal
Protects motor bearing from atmosphere
In or out-of-tank
Can run dry indefin
itely
Pu
mp has no bearings
SERIES 'EF' | VERTICAL PUMPS
Chemical resistant pumps & filters engineered for industry
®
EMAIL: [email protected]: (800) 323-5431 SERFILCO.COM
BULLETINP-316_G04/09/18
Page 1 of 2
PH: (800) 323-5431 EMAIL:[email protected] SERFILCO.COM
BULLETIN P-316_G 04/09/18
Page 2 of 2 Series 'EF' | Vertical Pumps
Order Information For standard pump-motor combination, select model from table below.
Select flow curve number providing the desired performance, then match to Model # listed below.
Standard models include: EPDM elastomers (CPVC or PP) & Viton (PVDF).
Motor HP is non-overloading at full capacity for S.G. of 1.0.
Standard 60 Hz models
Flow
Curve
Model # PCN
Model # PCN
Model # PCN
CPVC PP PVDF
1 EF3x2-1SC-D7.5 45-2011 EFP3x2-1SC-D7.5 45-2211 EFK3x2-1SC-D7.5 45-2411
2 EF3x2-2SC-D10.0 45-2022 EFP3x2-2SC-D10.0 45-2222 EFK3x2-2SC-D10.0 45-2422
3 EF3x2-3SC-D15.0 45-2033 EFP3x2-3SC-D15.0 45-2233 EFK3x2-3SC-D15.0 45-2433
5 EF3x2-5SC-H7.5 45-2054 EFP3x2-5SC-H7.5 45-2254 EFK3x2-5SC-H7.5 45-2454
6 EF3x2-6SC-D7.5 45-2061 EFP3x2-6SC-D7.5 45-2261 EFK3x2-6SC-D7.5 45-2461
Standard 50 Hz models
1 EF3x2-1SC-D7.5-50 45-2015 EFP3x2-1SC-D7.5-50 45-2215 EFK3x2-1SC-D7.5-50 45-2415
2 EF3x2-2SC-D7.5-50 45-2025 EFP3x2-2SC-D7.5-50 45-2225 EFK3x2-2SC-D7.5-50 45-2425
3 EF3x2-3SC-D10.0-50 45-2036 EFP3x2-3SC-D10.0-50 45-2236 EFK3x2-3SC-D10.0-50 45-2436
4 EF3x2-4SC-D10.0-50 45-2046 EFP3x2-4SC-D10.0-50 45-2246 EFK3x2-4SC-D10.0-50 45-2446
5 EF3x2-5SC-H7.5-50 45-2057 EFP3x2-5SC-H7.5-50 45-2257 EFK3x2-5SC-H7.5-50 45-2457
6 EF3x2-6SC-D7.5-50 45-2065 EFP3x2-6SC-D7.5-50 45-2265 EFK3x2-6SC-D7.5-50 45-2465
* For custom pump-motor combinations please consult Serfilco sales department. (800) 323-5431
Options
Description Add Suffix to Model
Add to PCN
Viton 'O'-rings installed: CPVC or PP pumps EPDM 'O'-rings: PVDF pumps
-V -L
-V -L
PVDF impeller & shaft sleeve: CPVC pump
For continuous operation above 180 F -K -K
Discharge hole in mounting plate -MPH -H
Alternate discharge location to match EHM2 -EHM -M
Description
CPVC PP PVDF
Add Suffix
To Model
Use Separate
PCN
Add Suffix
To Model
Use Separate
PCN
Add Suffix
To Model
Use Separate
PCN
Discharge pipe assembly -DPA 45-1202 -DPAP 45-1202-PP -DPAK 45-1202-K
Suction strainer Included Included -STK 45-1203-K
Suction extension w/ strainer 12" -K12 46-0081 K-12P 46-0081-PP -K12K 46-0081-K
24" -K24 46-0082 K-24P 46-0082-PP -K24K 46-0082-K
36" -K36 46-0083 K-36P 46-0083-PP -K36K 46-0083-K