p r o j e c t i d e a - logan graphic
TRANSCRIPT
FREETakeOne!
Use foamboard to add dramatic height to your framed artwork.You will need:• Artwork• 2 sheets of matboard in
coordinating colors• 1 sheet of 3/16” foamboard• Decorative paper• Logan mat cutter (any model)• FoamWerks Straight/Bevel
Cutter (WC-6010)
• FoamWerksTape (W-5003)
• Clear drying glue• Spray adhesive• Frame
* This project design by Connie Miley Cook.Copyright 2009 Logan Graphic Products, Inc.
Time Difficulty
1.5 hrs. Intermediate
P R O J E C T I D E A
For even moreexcitingfoamboardprojects, readFoamboardMagic byEileen L. Hull.
Printed on recycled paperwith vegetable inks.
WPS-2.1 1/09
High ReliefFoamboard Mat*
Top mat is made withfoamboard, covered withdecorative paper.
FoamWerks project sheets v5:Layout 1 1/6/09 5:01 PM Page 3
INSTRUCTIONS:1. Using the FoamWerks Straight/Bevel Cutter, cut
foamboard strips to the desired mat width. Eachfinished piece should have one long straight edgeand one long bevel edge. You will have two exteriorpieces and two interior pieces (Diagram 1). Cut aback-bevel on the interior pieces short edge(Diagram 2).
2. Assemble the foamboard mat from the backsideusing FoamWerks Tape. Flip the mat over and gluethe edges. Allow to dry.
3. Cut paper strips approximately 2” wider thanfoamboard mat segments. Cut the corners to 45º(Diagram 3).
3. Using spray adhesive, spray the backside of thepaper strips one at a time, and carefully wrap thefoamboard mat sides. Paper strips should slightlyoverlap at the 45° corners (Diagram 4).
4. Wrap the excess paper to the back of the mat, trimaway any excess (Diagram 5).
5. Cut matboard openings to size as desired. Loadthe artwork, mats and foamboard mat into theframe and your new masterpiece is complete!
Diagram 1 Diagram 2back-bevel
Diagram 3
Diagram 4 Diagram 5
WA-8001 FoamWerksCircle Cutter
WC-6001 FoamWerksStraight Cutter
WC-2001 FoamWerksV-Groove Cutter
WB-6020 FoamWerksFreestyle Cutter
WC-4010 FoamWerksRabbet Cutter
WC-6010 FoamWerksStraight/Bevel Cutter
WD-8010 FoamWerksHole Drill
brought toyou by
Logan Graphic Products, Inc.1100 Brown Street
Wauconda, IL 60084 USA1-800-331-6232
www.foamwerks.com
FoamWerks project sheets v5:Layout 1 1/6/09 5:01 PM Page 4