p040-041 r04-05 [cs3]特徴 features 構造図 construction figure 識別 identification ssx10516...
TRANSCRIPT
特徴 Features
構造図 Construction figure
識別 Identification
SSX10516 LF
UL VW-1の難燃対応。(カテゴリ AVLV2)
絶縁体にフッ素樹脂を使用。
耐熱200℃を満足。
細径化を実現。
耐熱耐寒性、耐油耐薬品性、耐溶剤性に優れています。
誘電率、誘電体損失が小さく、伝送速度アップを要する電気回路に最適。
Flame resisting : UL VW-1.(Category AVLV2)
Fluoroplastics is used for the insulator.
Heatresistant 200℃ are satisfied.
Making to a minute diameter is achieved.
It is excellent to heat, cold, oil, chemical, and solvents resistant.
The permittivity and the dielectric substance loss are small, and it is the best for the electric circuit where the transmission speed improvement is required.
●
●
●
●
●
●
●
●
●
●
●
●
FEP絶縁体FEP insulation
電子機器内部配線用電線 Wiring inside equipment
導体copper stranded conductor
・SSX10516 SSX10516
・SSX10516 SSX10516
・黒・白・赤・黄・青・透明・Y/G※Y/G線は緑地に黄色の3本埋込色帯(30~50%)となります。
・black, white, red, yellow, blue, transparency, Y/G※Y/G indicates green core with yellow stripe(30~50%).
販売標準長 Standard sale length【SSX10516】(28AWG~26AWGは条長500m)(24AWG~22AWGは条長300m)(20AWG~16AWGは条長200m~)
【SSX10516】(28AWG~26AWG are cut by 500m)(24AWG~22AWG are cut by 300m)(20AWG~16AWG are cut by more than 200m)
構造表 Construction table
許容電流 Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。
・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。
・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.
・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.
●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)
●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors周 囲 温 度 Ambient temperature(℃)電流減少係数 Correction factors
301.001400.59
400.971500.54
500.941600.49
600.911700.42
700.871800.34
800.841900.24
900.80
1000.77
1100.73
1200.69
1300.64
電 線 数 No. of wires 電流減少係数 Adjustment factors
2~30.70
40.63
5~60.56
7~150.49
16~400.43
61~0.34
41~600.39
線心数No. of cores サイズ
Size(AWG)
1C1C1C1C1C1C1C
28(0.08㎟)26(0.14㎟)24(0.22㎟)22(0.37㎟)20(0.56㎟)18(0.86㎟)16(1.34㎟)
構成Construction(本/mm)
導 体Conductor
FEP絶縁体FEP insulation
電気特性Electrical Characteristics
7/0.1277/0.167/0.2037/0.267/0.3219/0.2419/0.3
外径Outside diameter(mm)0.380.480.610.780.961.21.5
厚さThickness(mm)0.20.20.20.20.20.250.25
導体抵抗Conductor resistance(Ω/km20℃)
22214089.452.434.622.114.1
絶縁抵抗Insulation resistance(MΩkm20℃)1000100010001000100010001000
耐電圧Electrical strength(V/1min.)2000200020002000200020002000
外径Overall diameter 約approx(mm)
概算質量Approx.weight(kg/km)
0.780.881.011.181.361.72.0
234581116
許容電流Allowable ampacity(A)
46811152128
・SSX10516 SSX10516
対象規格
RoHS
認 証 Certification適合規格 Applicable standard形式記号 Official symbol定格電圧 Voltage rating定格温度 Temperature rating導 体 Conductor難 燃 性 Flame rating
UL AWM(10516)UL 758
UL STYLE 10516600V200℃UL 758VW-1
RoHS対応品
(UL規格耐油認証は受けておりません。)(It is not received the attestation of oil resistant from UL.)
海外規格ケーブル
海外規格ケーブル
SSX10516 LF(旧:サンレックス10516 LF)
SSX10516 LF(旧:サンレックス10516 LF)
(旧:サンレックス10516 LF)
耐 熱 性 ★★★★★耐 油 性 ★★★★★耐ノイズ性 ★難 燃 性 ★★★★柔 軟 性 ★非移行性 ★★★★★移動特性 ★※特性は目安となります。
特徴
表面印字 Surface Marking
HRF-SB/20276PEF LF
UL VW-1の難燃対応。(カテゴリ AVLV2)
耐油耐熱柔軟性ビニルシース材を使用。
絶縁体に発泡ポリオレフィンを使用。
特性インピーダンスを100±10Ω(シングルエイド)、130±10Ω(ディファレンシャル)に制御。
SCSI規格等の高速インターフェイスに対応。
シース色はベージュとなります。
シングルエンドモード(Single-end Mode)不平衡系。
シングルエンドモードとは、対をなしている線心1本と共通のシグナルグランド(対の残りの1本、その他の対の1本、一括編組シールド)間で信号を伝送させるモードです。
ディファレンシャルモード(Differential Mode)平衡系
ディファレンシャルモードとは、対をなしている線心間に差動信号(+信号と-信号)にて伝送させるモードです。
Flame resisting : UL VW-1.(Category AVLV2)
Oil, heat resistant and flexible PVC sheath material is used.
The foamed polyolefin is used for the insulator. The impedance : 100±10Ω(single-end), 130±10Ω(differential).
For a high-speed interface of the SCSI standard.
The color of the sheath is beige.
Single-end mode.
Shingle-end Mode is a mode to transmit the signal between one twin core and common signal grandeur(one of the remainder of pair, one of other pairs, shield braid of batch).
Differential mode.
Differential mode is a mode which transmit the differential motion signal(plus signal and mimus signal)between twin core.
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
導体(すずめっき軟銅より線)Tinned annealed copperstranded conductors
構造表 Construction table
識別 Identification
電子機器配線用ケーブル Electronic equipment cable
すずめっき軟銅線編組Tinned annealed copper braid shieldテープ
Tape発泡ポリオレフィン絶縁体Foamed polyolefin insulation
耐油耐熱柔軟性PVCシース(ベージュ)Oil, heat resistant and flexible PVC sheath(beige)
4P
10P
1
5
6
7
10 2
8 4
9 3
1
2
4
3
許容電流
●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)
301.00
400.89
500.77
600.63
700.45
80-
90-
100-
●識別表/Identification table対番
第1種線心第2種線心対番
第1種線心第2種線心対番
第1種線心第2種線心対番
第1種線心第2種線心
1黒茶11茶橙21赤青31黄緑
2黒赤12茶黄22赤紫32黄青
3黒橙13茶緑23赤灰33黄紫
4黒黄14茶青24赤白34黄灰
5黒緑15茶紫25橙黄
6黒青16茶灰26橙緑
7黒紫17茶白27橙青
8黒灰18赤橙28橙紫
9黒白19赤黄29橙灰
10茶赤20赤緑30橙白
○内数字は識別表の対番を示す。/Figures ○ indicate pair number inthe identification table.
TAIYO E67647 AWM 20276 80℃ 30V VW-1 LF
対 数No. of pairs サイズ
Size(AWG)
2P3P4P5P6P7P8P10P13P14P18P20P25P30P34P
30(0.05㎟)
構成Construction(本/mm)
導 体Conductor
発泡ポリオレフィン絶縁体foamed polyolefin insulation
電気特性Electrical Characteristics
7/0.10
外径Outside diameter(mm)
0.30
厚さThickness(mm)
0.21
導体抵抗Conductor resistance(Ω/km20℃)
375
絶縁抵抗Insulation resistance(MΩkm20℃)
100
耐電圧Electrical strength(V/1min.)
500
外径Outside diameter(mm)
概算質量Approx.weight(kg/km)
0.72
耐熱柔軟性ビニルシースHeat -resistant flexible- PVC sheath
厚さThickness(mm)
0.9
外径Overall diameter 約approx(mm)4.85.25.55.86.26.47.27.28.18.18.89.710.310.611.2
3030404350495560657085100110120135
許容電流Allowable ampacity(A)
1.00.80.70.60.60.60.60.50.50.40.40.40.40.30.3
Features
構造図 Construction figure
販売標準長 Standard sale length
●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)
電 線 数 No. of cables電流減少係数 Adjustment factors
2~30.70
40.63
5~60.56
7~150.49
16~400.43
61~0.34
41~600.39
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。
・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。
・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.
・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.
100m○は受注生産品となります。
100m○:Order production
○○○
○
○
○
○
表面印字
RoHS対応品
対象規格
RoHS
認 証 Certification適合規格 Applicable standard形式記号 Official symbol定格電圧 Voltage rating定格温度 Temperature rating導 体 Conductor難 燃 性 Flame rating
UL AWMUL 758
UL STYLE 2027630V80℃UL 758VW-1
HRF-SB/20276PEF LF
HRF-SB/20276PEF LF
海外規格ケーブル
海外規格ケーブル
耐 熱 性 ★★★耐 油 性 ★★★★★耐ノイズ性 ★★★★難 燃 性 ★★★★柔 軟 性 ★★非移行性 ★★★★★移動特性 ★※特性は目安となります。
HP-SB/20276SR LF
UL VW-1の難燃対応。(カテゴリ AVLV2)
耐油耐熱柔軟性ビニルシース材を使用。
RS232C対応ケーブル
圧接タイプのハーフピッチコネクタに最適。
Flame resisting : UL VW-1.(Category AVLV2)
Oil, heat resistant and flexible PVC sheath material is used.
Cable for RS232C.
It is the best for the half pitch connector of the insulation displacement type.
●
●
●
●
●
●
●
●
導体(すずめっき軟銅より線)Tinned annealed copperstranded conductors
電子機器配線用ケーブル Electronic equipment cable
すずめっき軟銅線編組Tinned annealed copper braid shieldテープ
Tape半硬質ビニル絶縁体Semi-rigid PVC insulation
耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)
許容電流
TAIYO E67647 AWM 20276 80℃ VW-1 LF2P3P5P7P10P14P18P20P25P34P
28(0.08㎟)7/0.127 0.38 0.1 211 10 5000.58 0.9
4.24.65.15.65.86.47.27.58.18.8
2430384655708590105130
1.41.20.90.80.70.60.60.60.50.4
橙
薄灰
白
黄
桃
橙
薄灰
白
黄
桃
対番 絶縁体色31
32
33
34
35
橙
薄灰
白
黄
桃
ドットマーク対番 絶縁体色16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
橙
薄灰
白
黄
桃
ドットマーク
(連続)(連続)(連続)(連続)(連続)(連続)(連続)(連続)(連続)(連続)
橙
薄灰
白
黄
桃
橙
薄灰
白
黄
桃
対番 絶縁体色1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
橙
薄灰
白
黄
桃
ドットマーク
7P
10P
1
5
6
7
10 2
8 4
9 34
12
3
7
65
第1種心線
第2種心線
●識別表/Identification table
●対例
※短点は1mm、長点は2mm、間隔1mm、 ピッチ約12mm
※A short point is 1mm, the length point is 2mm, the interval is 1mm, and the pitch is about 12mm.
○内数字は識別表の対番を示す。/Figures ○ indicate pair number in the identification table.
黒色のドットマーク/Black dot mark
絶縁体の色は、第1、第2芯線とも同色とする。/In the color of the insulator, the 1stand 2nd wick line is the same color.
第1、第2芯線のドットマークの色は、黒、赤とする。/The color of the first kind and the 2nd kind of dot mark is a black and red.
赤色のドットマーク/Red dot mark
特徴 Features
表面印字 Surface Marking
構造図 Construction figure
識別 Identification
識別 Identification
構造表 Construction table
●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)
301.00
400.89
500.77
600.63
700.45
80-
90-
100-
販売標準長 Standard sale length100m 100m●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)
電 線 数 No. of cables電流減少係数 Adjustment factors
2~30.70
40.63
5~60.56
7~150.49
16~400.43
61~0.34
41~600.39
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
対 数No. of pairs サイズ
Size(AWG)
構成Construction(本/mm)
導 体Conductor
半硬質ビニル絶縁体Semi-rigid PVC insulation
電気特性Electrical Characteristics
外径Outside diameter(mm)
厚さThickness(mm)
導体抵抗Conductor resistance(Ω/km20℃)
絶縁抵抗Insulation resistance(MΩkm20℃)
耐電圧Electrical strength(V/1min.)
外径Outside diameter(mm)
概算質量Approx.weight(kg/km)
耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath
厚さThickness(mm)
外径Overall diameter 約approx(mm)
許容電流Allowable ampacity(A)
Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。
・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。
・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.
・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.
表面印字
RoHS対応品
対象規格
RoHS
認 証 Certification適合規格 Applicable standard形式記号 Official symbol定格電圧 Voltage rating定格温度 Temperature rating導 体 Conductor難 燃 性 Flame rating
UL AWMUL 758
UL STYLE 2027630V80℃UL 758VW-1
HP-SB/20276SR LF
HP-SB/20276SR LF
海外規格ケーブル
海外規格ケーブル
耐 熱 性 ★★★耐 油 性 ★★★★★耐ノイズ性 ★★★★難 燃 性 ★★★★柔 軟 性 ★★非移行性 ★★★★★移動特性 ★※特性は目安となります。
特徴
HK/20276XL LF
UL VW-1、cUL FT1の難燃対応。(カテゴリ AVLV2、AVLV7)
耐油耐熱柔軟性ビニルシース材を使用。
粉塵の出にくい介在を使用。
RS485、RS422、RS232C対応ケーブル。
Flame resisting : UL VW-1, cUL FT1.(Category AVLV2, AVLV7)
Oil, heat resistant and flexible PVC sheath material is used.
Filler of which dust doesn't go out easily is used,
Cable for RS485, RS422, RS232C.
●
●
●
●
●
●
●
●
電子機器配線用ケーブルElectronic equipment cable
許容電流
架橋ポリエチレン絶縁体Cross-linked polyethylene insulation
E67647 AWM 20276 80℃ 30V VW-1 TAIYO AWM ⅡA 80℃ 30V FT1 TAIYO LF
4P3C
10P
1
9
10
5
8 2
6 4
7 32
14
3
白
黄 青
●識別表/Identification table対番
第1種線心第2種線心対番
第1種線心第2種線心対番
第1種線心第2種線心
1青
11青
21青
2黄
12黄
22黄
3緑白13緑黒23緑橙
4赤
14赤
24赤
5紫
15紫
25紫
6青
16青
7黄
17黄
8緑茶18緑灰
9赤
19赤
10紫
20紫
1P2P3P4P5P6P7P8P10P12P15P18P20P25P1P2P3P4P5P6P7P8P10P12P15P18P20P25P1P2P3P4P5P6P7P8P10P12P15P18P20P25P
26(0.14㎟)
24(0.22㎟)
22(0.37㎟)
7/0.16
7/0.203
7/0.26
0.48
0.61
0.78
0.20
0.25
0.30
154
98.3
63.2
1000
1000
1000
500
500
500
0.88
1.11
1.38
0.9
1.0
0.9
1.0
0.9
1.0
1.4
3.74.55.05.45.86.36.37.27.27.98.79.410.311.04.15.25.86.36.87.37.38.58.59.610.611.212.413.34.76.06.87.48.08.78.710.410.411.612.813.515.816.9
152330333945475565759010512014019323947556065809011013015017020025445565759095120140165195230285340
2.21.71.41.21.21.01.00.900.900.750.750.660.660.603.72.92.42.12.01.71.71.51.51.21.21.11.11.04.53.42.92.52.42.02.01.81.81.51.51.31.31.2
3C3C3C
262422
7/0.167/0.2037/0.26
0.480.610.78
0.200.250.30
15498.363.2
100010001000
500500500
0.881.111.38
0.90.90.9
3.84.34.9
172230
1.93.23.9
○内数字は識別表の対番を示す。/Figures ○ indicate pair number in the identification table.
Features
表面印字 Surface Marking
構造図 Construction figure
識別 Identification
導体(すずめっき軟銅より線)Tinned annealed copperstranded conductors
テープTape
耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)
構造表 Construction table
●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)
301.00
400.89
500.77
600.63
700.45
80-
90-
100-
販売標準長 Standard sale length100m(切断販売が可能なサイズもございます。詳細は窓口にお問い合わせ下さい。)
100m(There are sizes that can be the cutting sales, too. Please inquire of sales staff in detail.)
●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)
電 線 数 No. of cables電流減少係数 Adjustment factors
2~30.70
40.63
5~60.56
7~150.49
16~400.43
61~0.34
41~600.39
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
線心数No. of cores サイズSize
(AWG)構成
Construction(mm)
架橋PE絶縁体Cross-linked polyethylene insulation
電気特性Electrical Characteristics
外径Outside diameter(mm)
厚さThickness(mm)
導体抵抗Conductor resistance(Ω/km20℃)
絶縁抵抗Insulation resistance(MΩkm20℃)
耐電圧Electrical strength(V/1min.)
外径Outside diameter(mm)
概算質量Approx.weight(kg/km)
耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath
厚さThickness(mm)
外径Overall diameter 約approx(mm)
許容電流Allowable ampacity(A)
許容電流Allowable ampacity(A)
導 体Conductor
対 数No. of pairs サイズ
Size(AWG)
構成Construction(本/mm)
架橋PE絶縁体Cross-linked polyethylene insulation
電気特性Electrical Characteristics
外径Outside diameter(mm)
厚さThickness(mm)
導体抵抗Conductor resistance(Ω/km20℃)
絶縁抵抗Insulation resistance(MΩkm20℃)
耐電圧Electrical strength(V/1min.)
外径Outside diameter(mm)
概算質量Approx.weight(kg/km)
耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath
厚さThickness(mm)
外径Overall diameter 約approx(mm)
導 体Conductor
Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。
・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。
・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.
・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.
表面印字
RoHS対応品
対象規格
RoHS
認 証 Certification適合規格 Applicable standard形式記号 Official symbol定格電圧 Voltage rating定格温度 Temperature rating導 体 Conductor難 燃 性 Flame rating
UL AWMUL 758
UL STYLE 2027630V80℃UL 758VW-1
cULCSA C22.2 No.210CSA AWM ⅡA
30V80℃
CSA C22.2 No.210FT1
HK/20276XL LF
HK/20276XL LF
海外規格ケーブル
海外規格ケーブル
多対ケーブル耐 熱 性 ★★★耐 油 性 ★★★★★耐ノイズ性 ★★難 燃 性 ★★★★柔 軟 性 ★★非移行性 ★★★★★移動特性 ★※特性は目安となります。
多心ケーブル耐 熱 性 ★★★耐 油 性 ★★★★★耐ノイズ性 ★難 燃 性 ★★★★柔 軟 性 ★★非移行性 ★★★★★移動特性 ★※特性は目安となります。
特徴
HK-SB/20276XL LF
UL VW-1、cUL FT1の難燃対応。(カテゴリ AVLV2、AVLV7)
耐油耐熱柔軟性ビニルシース材を使用。
粉塵の出にくい介在を使用。
RS485、RS422、RS232C対応ケーブル。
ドレンワイヤー入り。
Flame resisting : UL VW-1, cUL FT1.(Category AVLV2, AVLV7)
Oil, heat resistant and flexible PVC sheath material is used.
Filler of which dust doesn't go out easily is used,
Cable for RS485, RS422, RS232C.
With drain wire.
●
●
●
●
●
●
●
●
●
●
導体(すずめっき軟銅より線)Tinned annealed copperstranded conductors
電子機器配線用ケーブルElectronic equipment cable
テープTape
耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)
架橋ポリエチレン絶縁体Cross-linked polyethylene insulation
E67647 AWM 20276 80℃ 30V VW-1 TAIYO AWM ⅡA 80℃ 30V FT1 TAIYO LF
●識別表/Identification table
○内数字は識別表の対番を示す。/Figures ○ indicate pair number in the identification table.
すずめっき軟銅線編組Tinned annealed copper braid shield
対番第1種線心第2種線心対番
第1種線心第2種線心対番
第1種線心第2種線心
1青
11青
21青
2黄
12黄
22黄
3緑白13緑黒23緑橙
4赤
14赤
24赤
5紫
15紫
25紫
6青
16青
7黄
17黄
8緑茶18緑灰
9赤
19赤
10紫
20紫
4P3C
10P
1
9
10
5
8 2
6 4
7 32
14
3
白
黄 青
1P2P3P4P5P6P7P8P10P12P15P18P20P25P1P2P3P4P5P6P7P8P10P12P15P18P20P25P1P2P3P4P5P6P7P8P10P12P15P18P20P25P
4.35.15.66.06.46.96.97.87.88.59.510.111.011.74.75.86.46.97.47.97.99.39.310.311.311.913.214.15.36.67.68.08.69.59.511.111.112.313.614.316.617.7
2637455055657080851001201401551803148607075859011512514517019522526041658095105125135165185215255290355415
2.21.71.41.21.21.01.00.900.900.750.750.660.660.603.72.92.42.12.01.71.71.51.51.21.21.11.11.04.53.42.92.52.42.02.01.81.81.51.51.31.31.2
3C3C3C
262422
7/0.167/0.2037/0.26
0.480.610.78
0.200.250.30
15498.363.2
100010001000
500500500
0.881.111.38
0.90.90.9
4.34.95.5
283647
1.93.23.9
26(0.14㎟) 7/0.16 0.48 0.20
24(0.22㎟) 7/0.203 0.61 0.25 1.11
22(0.37㎟) 7/0.26 0.78 0.30 1.38
0.88
0.9
154 1000 500
98.3 1000 500
63.2 1000 500
0.9
1.0
1.0
0.9
1.0
1.4
Features
表面印字 Surface Marking
構造図 Construction figure
識別 Identification
許容電流
●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)
301.00
400.89
500.77
600.63
700.45
80-
90-
100-
販売標準長 Standard sale length100m(切断販売が可能なサイズもございます。詳細は窓口にお問い合わせ下さい。)
100m(There are sizes that can be the cutting sales, too. Please inquire of sales staff in detail.)
●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)
電 線 数 No. of cables電流減少係数 Adjustment factors
2~30.70
40.63
5~60.56
7~150.49
16~400.43
61~0.34
41~600.39
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
線心数No. of cores サイズSize
(AWG)構成
Construction(本/mm)
架橋PE絶縁体Cross-linked polyethylene insulation
電気特性Electrical Characteristics
外径Outside diameter(mm)
厚さThickness(mm)
導体抵抗Conductor resistance(Ω/km20℃)
絶縁抵抗Insulation resistance(MΩkm20℃)
耐電圧Electrical strength(V/1min.)
外径Outside diameter(mm)
概算質量Approx.weight(kg/km)
耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath
厚さThickness(mm)
外径Overall diameter
約approx(mm)
許容電流Allowable ampacity(A)
許容電流Allowable ampacity(A)
導 体Conductor
対 数No. of pairs サイズ
Size(AWG)
構成Construction(本/mm)
架橋PE絶縁体Cross-linked polyethylene insulation
電気特性Electrical Characteristics
外径Outside diameter(mm)
厚さThickness(mm)
導体抵抗Conductor resistance(Ω/km20℃)
絶縁抵抗Insulation resistance(MΩkm20℃)
耐電圧Electrical strength(V/1min.)
外径Outside diameter(mm)
概算質量Approx.weight(kg/km)
耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath
厚さThickness(mm)
外径Overall diameter
約approx(mm)
導 体Conductor
構造表 Construction table
Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。
・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。
・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.
・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.
ドレンワイヤdrain wire
表面印字
RoHS対応品
対象規格
RoHS
認 証 Certification適合規格 Applicable standard形式記号 Official symbol定格電圧 Voltage rating定格温度 Temperature rating導 体 Conductor難 燃 性 Flame rating
UL AWMUL 758
UL STYLE 2027630V80℃UL 758VW-1
cULCSA C22.2 No.210CSA AWM ⅡA
30V80℃
CSA C22.2 No.210FT1
HK-SB/20276XL LF
HK-SB/20276XL LF
海外規格ケーブル
海外規格ケーブル
多対ケーブル耐 熱 性 ★★★耐 油 性 ★★★★★耐ノイズ性 ★★★★難 燃 性 ★★★★柔 軟 性 ★★非移行性 ★★★★★移動特性 ★※特性は目安となります。
多心ケーブル耐 熱 性 ★★★耐 油 性 ★★★★★耐ノイズ性 ★★★難 燃 性 ★★★★柔 軟 性 ★★非移行性 ★★★★★移動特性 ★※特性は目安となります。
特徴 Features
表面印字 Surface Marking
構造図 Construction figure
識別 Identification
CL2/2464-3599-DS LF
UL VW-1、cUL FT1の難燃対応。(カテゴリ QPTZ、AVLV2、AVLV7)
UL垂直トレイ難燃試験に合格。
耐油耐熱柔軟性ビニルシース材を使用。
トレイケーブルとしても使用可能。
RS485、RS422、RS232C対応ケーブル。
リスティング規格であるCL2を取得しており、NFPA70,79に対応。
Flame resisting : UL VW-1, cUL FT1.(Category QPTZ, AVLV2, AVLV7)
It passes Vertical-Tray Flame Test of UL.
Oil, heat resistant and flexible PVC sheath material is used.
It is possible to use it as a tray cable.
Cable for RS485, RS422, RS232C.
CL2 that is the listing standard is acquired and it corresponds to NFPA70,79.
●
●
●
●
●
●
●
●
●
●
●
●
電子機器配線用ケーブル Electronic equipment cable
E242171(UL)CL2 75℃ □□AWG or AWM 2464 80℃ 300V VW-1 E67647 AWM ⅡA 80℃ 300V FT1 TAIYO LF
○内数字は識別表の対番を示す。/Figures ○ indicate pair number in the identification table.
3
4
2
1
4P 10P
3
1
2
7
10 4
8 6
9 5
●識別表/Identification table対番
第1種線心第2種線心対番
第1種線心第2種線心
1青青/白11青青/黒
2黄黄/白12黄黄/黒
3緑緑/白13緑緑/黒
4赤赤/白14赤赤/黒
5紫紫/白15紫紫/黒
6青青/茶
7黄黄/茶
8緑緑/茶
9赤赤/茶
10紫紫/茶
1P2P3P4P5P7P10P15P1P2P3P4P5P7P10P15P1P2P3P4P5P7P10P15P1P2P3P5P10P1P2P3P
5.16.77.17.78.38.910.312.55.77.68.18.89.510.312.015.76.28.59.110.010.811.713.817.97.510.811.614.018.98.612.513.6
355565758510014018543758510512014519530550901101351551852604007514017025046095185235
3.72.92.42.12.01.71.51.24.53.42.92.52.42.01.81.56.04.63.93.43.22.72.42.010.58.16.85.64.212.79.88.3
白/黒は黒色絶縁体上に白色ラインを施します。/White/Black indicates black core with white stripe.
24(0.22㎟) 7/0.203 0.61 0.30 97.5 100 20001.2 1.0
22(0.37㎟) 7/0.26 0.78 0.35 57.5 100 20001.5 1.0
1.5
1.5
1.5
20(0.53㎟) 21/0.18 0.95 0.40 36.2 100 20001.8 1.0
18(0.89㎟) 35/0.18 1.2 0.60 22.8 100 20002.4 1.0
16(1.38㎟) 26/0.26 1.5 0.70 14.3 100 20002.9 1.0
対象規格
RoHS
認 証 Certification適合規格 Applicable standard形式記号 Official symbol定格電圧 Voltage rating定格温度 Temperature rating導 体 Conductor
難 燃 性 Flame rating
UL CL2UL 13CL2150V75℃UL 13
VW-1.Vertical-Tray Flame Test
UL AWMUL 758
UL STYLE 2464300V80℃UL 758VW-1
cUL AWMCSA C22.2 No.210CSA AWM ⅡA
300V80℃
CSA C22.2 No.210FT1
導体(すずめっき軟銅より線)Tinned annealed copperstranded conductors
アルミ化PETテープAl pet tape
耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)
架橋ポリエチレン絶縁体Cross-linked polyethylene insulation
すずめっき軟銅線編組Tinned annealed copper braid shield
許容電流
●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)
301.00
400.89
500.77
600.63
700.45
80-
90-
100-
●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)
電 線 数 No. of cables電流減少係数 Adjustment factors
2~30.70
40.63
5~60.56
7~150.49
16~400.43
61~0.34
41~600.39
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
対 数No. of pairs サイズ
Size(AWG)
構成Construction(本/mm)
導 体Conductor
架橋PE絶縁体Cross-linked polyethylene insulation
電気特性Electrical Characteristics
外径Outside diameter(mm)
厚さThickness(mm)
導体抵抗Conductor resistance(Ω/km20℃)
絶縁抵抗Insulation resistance(MΩkm20℃)
耐電圧Electrical strength(V/1min.)
外径Outside diameter(mm)
概算質量Approx.weight(kg/km)
耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath
厚さThickness(mm)
外径Overall diameter 約approx(mm)
許容電流Allowable ampacity(A)
構造表 Construction table
Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。
・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。
・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.
・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.
販売標準長 Standard sale length100m(切断販売が可能なサイズもございます。詳細は窓口にお問い合わせ下さい。)
100m(There are sizes that can be the cutting sales, too. Please inquire of sales staff in detail.)
表面印字
RoHS対応品
CL2/2464-3599-DS LF
CL2/2464-3599-DS LF
海外規格ケーブル
海外規格ケーブル
耐 熱 性 ★★★耐 油 性 ★★★★★耐ノイズ性 ★★★★★難 燃 性 ★★★★★柔 軟 性 ★★非移行性 ★★★★★移動特性 ★※特性は目安となります。
特徴 Features
表面印字 Surface Marking
構造図 Construction figure
CMX/2464-1061/ⅡA LF
UL、cUL共用。(カテゴリー AVLV2, AVLV7, DUZX, DUZX7)
UL VW-1、cUL FT1の難燃対応。
耐油耐熱柔軟性ビニルシース材を使用。
リスティング規格であるCMXを取得しておりNFPA70,79に対応。
Standard UL, cUL.(Category AVLV2,AVLV7,DUZX,DUZX7)
Flame resisting : UL VW-1, cUL FT1.
Oil, heat resistant and flexible PVC sheath material is used.
CMX that is the listing standard is acquired and it corresponds to NFPA70,79.
●
●
●
●
●
●
●
●
電子機器配線用ケーブルElectronic equipment cable
半硬質ビニル絶縁体Semi-rigid PVC insulation
導体(すずめっき軟銅より線)Tinned annealed copperstranded conductors
テープTape
半硬質ビニル絶縁体Semi-rigid PVC insulation
耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)
第1種心線
第2種心線
●対例
○内数字は識別表1の線番を示す。/Figures ○ indicate core number in the identification table 1.
※短点は1mm、長点は2mm、間隔1mm、ピッチ約12mm
※A short point is 1mm, the length point is 2mm, the interval is 1mm, and the pitch is about 12mm.
※短点は1mm、長点は2mm、間隔1mm、ピッチ約12mm
○内数字は識別表2の対番を示す。/Figures ○ indicate pair number in the identification table 2.
※A short point is 1mm, the length point is 2mm, the interval is 1mm, and the pitch is about 12mm.
黒色のドットマーク/Black dot mark
赤色のドットマーク/Red dot mark
・多心ケーブル/Multi core cable
・多対ケーブル/Multi pair cable
2
1
2
1
3
2
14
3
4C
3C2C
・2C~4C
・多対ケーブル/Multi pair cable
対番12345678910
絶縁体色橙薄灰白黄桃橙薄灰白黄桃
ドットマーク
7P
10P
3
1
2
7
10 4
8 6
9 5
1
23
4
7
65
橙
薄灰
白
黄
桃
橙
薄灰
白
黄
桃
対番 絶縁体色16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
橙
薄灰
白
黄
桃
ドットマーク
(連続)(連続)(連続)(連続)(連続)(連続)(連続)(連続)(連続)(連続)
橙
薄灰
白
黄
桃
橙
薄灰
白
黄
桃
対番 絶縁体色1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
橙
薄灰
白
黄
桃
ドットマーク
●識別表1/Identification table1
●識別表2/Identification table2
絶縁体の色は、第1、第2芯線とも同色とする。/The color of the insulator, the 1stand 2nd core is the same color.
第1、第2芯線のドットマークの色は、黒、赤とする。/The color of the first kind and the 2nd kind of dot mark is a black and red.
対象規格
RoHS
認 証 Certification適合規格 Applicable standard形式記号 Official symbol定格電圧 Voltage rating定格温度 Temperature rating導 体 Conductor難 燃 性 Flame rating
UL CMXUL 444CMX300V75℃UL 444VW-1
cUL CMHCSA C22.2 No.214
CMH300V75℃
CSA C22.2 No.214FT1
UL AWMUL 758
UL STYLE 2464300V80℃UL 758VW-1
cUL AWMCSA C22.2 No.210CSA AWM ⅡA
300V80℃
CSA C22.2 No.210FT1
導体(すずめっき軟銅より線)Tinned annealed copperstranded conductors
テープTape
耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)
識別 Identification
表面印字
表面印字
E176892(UL) CMX □□AWG 75℃ or AWM 2464 80℃ 300V VW-1 or c(UL)CMH □□AWG75℃ or AWM ⅡA 80℃ 300V FT1 TAIYO LF
RoHS対応品
CMX/2464-1061/ⅡA LF
CMX/2464-1061/ⅡA LF
多対ケーブル耐 熱 性 ★★★耐 油 性 ★★★★★耐ノイズ性 ★★難 燃 性 ★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。
多心ケーブル耐 熱 性 ★★★耐 油 性 ★★★★★耐ノイズ性 ★難 燃 性 ★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。
許容電流
1P2P3P4P5P6P7P8P10P12P15P18P20P25P30P3P4P5P6P7P8P10P12P15P18P20P25P30P
3.94.75.35.76.16.66.67.67.68.49.39.810.811.612.05.86.36.87.37.38.58.59.410.410.912.113.013.5
1627333944505560708510011513015518039475565708095110135155175210245
2.21.71.41.21.21.01.00.90.90.70.70.60.60.60.52.42.12.01.71.71.51.51.21.21.11.11.00.9
3C2C3C4C
26(0.14㎟)
24(0.22㎟)
7/0.16
7/0.203
0.48
0.61
0.26
0.27
146
97.5
10
10
2000
2000
1.00
1.15
0.9
0.9
4.14.24.44.7
19202328
1.93.73.22.9
26(0.14㎟) 7/0.16 0.48 0.26 146 10 20001.00 0.9
24(0.22㎟) 7/0.203 0.61 0.27 97.5 10 20001.15 0.9
構造表 Construction table
●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)
301.00
400.89
500.77
600.63
700.45
80-
90-
100-
販売標準長 Standard sale length100m 100m
●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)
電 線 数 No. of cables電流減少係数 Adjustment factors
2~30.70
40.63
5~60.56
7~150.49
16~400.43
61~0.34
41~600.39
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。
・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。
・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.
・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.
線心数No. of cores サイズ
Size(AWG)
構成Construction(本/mm)
導 体Conductor
半硬質ビニル絶縁体Semi-rigid PVC insulation
電気特性Electrical Characteristics
外径Outside diameter(mm)
厚さThickness(mm)
導体抵抗Conductor resistance(Ω/km20℃)
絶縁抵抗Insulation resistance(MΩkm20℃)
耐電圧Electrical strength(V/1min.)
外径Outside diameter(mm)
概算質量Approx.weight(kg/km)
耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath
厚さThickness(mm)
外径Overall diameter 約approx(mm)
許容電流Allowable ampacity(A)
対 数No. of pairs サイズ
Size(AWG)
構成Construction(本/mm)
導 体Conductor
半硬質ビニル絶縁体Semi-rigid PVC insulation
電気特性Electrical Characteristics
外径Outside diameter(mm)
厚さThickness(mm)
導体抵抗Conductor resistance(Ω/km20℃)
絶縁抵抗Insulation resistance(MΩkm20℃)
耐電圧Electrical strength(V/1min.)
外径Outside diameter(mm)
概算質量Approx.weight(kg/km)
耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath
厚さThickness(mm)
外径Overall diameter 約approx(mm)
許容電流Allowable ampacity(A)
RoHS対応品CMX/2464-1061/ⅡA LF電子機器配線用ケーブル Electronic equipment cable
対象規格
RoHS
CMX/2464-1061/ⅡA LF
CMX/2464-1061/ⅡA LF
海外規格ケーブル
海外規格ケーブル
CMX/2464-1007/ⅡA LF
UL、cUL共用。(カテゴリー AVLV2, AVLV7, DUZX, DUZX7)
UL VW-1、cUL FT1の難燃対応。
耐油耐熱柔軟性ビニルシース材を使用。
リスティング規格であるCMXを取得しておりNFPA70,79に対応。
Standard UL, cUL.(Category AVLV2,AVLV7,DUZX,DUZX7)
Flame resisting : UL VW-1, cUL FT1.
Oil, heat resistant and flexible PVC sheath material is used.
CMX that is the listing standard is acquired and it corresponds to NFPA70,79.
●
●
●
●
●
●
●
●
電子機器配線用ケーブル Electronic equipment cable
※短点は1mm、長点は2mm、間隔1mm、ピッチ約12mm
○内数字は識別表の線番を示す。/Figures ○ indicate core number in the identification table.
※A short point is 1mm, the length point is 2mm, the interval is 1mm, and the pitch is about 12mm.
・2C~4C ・5心以上はナンバリング識別/5 or more is identified by numbering
(1)22、20AWGの場合/For 22 and 20AWG
(2)18、16AWGの場合(2、3、4心の20AWG含む)/For 18 and 16AWG(20AWG of 2, 3, and 4 cores contains it).
2
14
3
4C 10C
3
1
2
7
10 4
8 6
9 5
線番161718192021222324252627282930
絶縁体色橙薄灰白黄桃橙薄灰白黄桃橙薄灰白黄桃
ドットマーク線番123456789101112131415
絶縁体色橙薄灰白黄桃橙薄灰白黄桃橙薄灰白黄桃
ドットマーク
(連続)(連続)(連続)(連続)(連続)
●識別表/Identification table
1
3
2
4
5 3
2
46
7
81
5C8C
4E
3E
白
黒
2C
白
黒
Y/G
赤 白
黒Y/G
10C 20C
3
1
2
7
10 4
8 6
9 5
89
10
11
12
1314
20
19
18
17
1615
127
36
45
例
○内数字は黒色絶縁体上の白色ナンバリングを示す。/Figures in ○ indicate white numbering on black insulator.
※Y/G線は緑地に黄色の3本埋込色帯(30~50%)となります。/Y/G indicates green core with yellow stripe(30~50%).
耐熱PVC絶縁体Heat resistant PVC insulation
5
特徴 Features
構造図 Construction figure
識別 Identification
導体(すずめっき軟銅より線)Tinned annealed copperstranded conductors
テープTape
耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)
表面印字
表面印字 Surface Marking
E176892 (UL) CMX □□AWG 75℃ or AWM 2464 80℃ 300V VW-1 or c(UL)CMH □□AWG75℃ or AWM ⅡA 80℃ 300V FT1 TAIYO LF
対象規格
RoHS
認 証 Certification適合規格 Applicable standard形式記号 Official symbol定格電圧 Voltage rating定格温度 Temperature rating導 体 Conductor難 燃 性 Flame rating
UL CMXUL 444CMX300V75℃UL 444VW-1
cUL CMHCSA C22.2 No.214
CMH300V75℃
CSA C22.2 No.214FT1
UL AWMUL 758
UL STYLE 2464300V80℃UL 758VW-1
cUL AWMCSA C22.2 No.210CSA AWM ⅡA
300V80℃
CSA C22.2 No.210FT1
RoHS対応品
56 57
CMX/2464-1007/ⅡA LF
CMX/2464-1007/ⅡA LF
海外規格ケーブル
海外規格ケーブル
耐 熱 性 ★★★耐 油 性 ★★★★★耐ノイズ性 ★難 燃 性 ★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。
2C3C4C5C6C8C10C12C16C20C30C2C3C4C6C8C10C12C16C20C24C30C2C3E4E6C8C10C12C16C20C30C2C3E4E6C
5.55.76.26.67.18.28.89.110.011.012.95.86.16.67.78.99.69.910.912.013.314.16.46.77.28.59.810.611.012.113.416.87.07.48.09.5
31384655608090105130160225374655801001151351702102502955060751051401601852352954556585105140
4.53.93.43.12.92.52.42.01.81.81.56.05.24.63.93.43.22.72.42.42.02.010.59.18.16.86.05.64.74.24.23.512.711.09.88.3
22(0.34㎟) 17/0.16 0.76 0.46 57.5 10 20001.68 1.0
20(0.53㎟) 21/0.18 0.95 0.46 36.2 10 20001.87 1.0
18(0.89㎟) 35/0.18 1.2 0.46 22.8 10 20002.1 1.0
16(1.38㎟) 26/0.26 1.5 0.46 14.3 10 20002.5 1.0
1.5
許容電流構造表 Construction table
●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)
301.00
400.89
500.77
600.63
700.45
80-
90-
100-
販売標準長 Standard sale length100m 100m
●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)
電 線 数 No. of cables電流減少係数 Adjustment factors
2~30.70
40.63
5~60.56
7~150.49
16~400.43
61~0.34
41~600.39
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。
・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。
・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.
・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.
線心数No. of cores サイズ
Size(AWG)
構成Construction(本/mm)
導 体Conductor
耐熱ビニル絶縁体Heat resistant PVC insulation
電気特性Electrical Characteristics
外径Outside diameter(mm)
厚さThickness(mm)
導体抵抗Conductor resistance(Ω/km20℃)
絶縁抵抗Insulation resistance(MΩkm20℃)
耐電圧Electrical strength(V/1min.)
外径Outside diameter(mm)
概算質量Approx.weight(kg/km)
耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath
厚さThickness(mm)
外径Overall diameter 約approx(mm)
許容電流Allowable ampacity(A)
RoHS対応品CMX/2464-1007/ⅡA LF電子機器配線用ケーブル Electronic equipment cable
対象規格
RoHS
CMX/2464-1007/ⅡA LF
CMX/2464-1007/ⅡA LF
海外規格ケーブル
海外規格ケーブル
CMX/2464-1061/ⅡA-SB LF
UL、cUL共用。(カテゴリー AVLV2, AVLV7, DUZX, DUZX7)
UL VW-1、cUL FT1の難燃対応。
耐油耐熱柔軟性ビニルシース材を使用。
リスティング規格であるCMXを取得しておりNFPA70,79に対応。
Standard UL, cUL.(Category AVLV2,AVLV7,DUZX,DUZX7)
Flame resisting : UL VW-1, cUL FT1.
Oil, heat resistant and flexible PVC sheath material is used.
CMX that is the listing standard is acquired and it corresponds to NFPA70,79.
●
●
●
●
●
●
●
●
電子機器配線用ケーブルElectronic equipment cable
第1種心線
第2種心線
●対例 黒色のドットマーク/Black dot mark
赤色のドットマーク/Red dot mark
・2C~4C
・多対ケーブル/Multi pair cable
対番12345678910
絶縁体色橙薄灰白黄桃橙薄灰白黄桃
ドットマーク
7P
10P
3
1
2
7
10 4
8 6
9 5
1
23
4
7
65
橙
薄灰
白
黄
桃
橙
薄灰
白
黄
桃
対番 絶縁体色16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
橙
薄灰
白
黄
桃
ドットマーク
(連続)(連続)(連続)(連続)(連続)(連続)(連続)(連続)(連続)(連続)
橙
薄灰
白
黄
桃
橙
薄灰
白
黄
桃
対番 絶縁体色1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
橙
薄灰
白
黄
桃
ドットマーク
●識別表1/Identification table1
●識別表2/Identification table2
絶縁体の色は、第1、第2芯線とも同色とする。/The color of the insulator, the 1stand 2nd core is the same color.
第1、第2芯線のドットマークの色は、黒、赤とする。/The color of the first kind and the 2nd kind of dot mark is a black and red.
特徴 Features
構造図 Construction figure
識別 Identification
導体(すずめっき軟銅より線)Tinned annealed copperstranded conductors
すずめっき軟銅線編組Tinned annealed copper braid shield
テープTape
半硬質ビニル絶縁体Semi-rigid PVC insulation
耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)
導体(すずめっき軟銅より線)Tinned annealed copperstranded conductors
すずめっき軟銅線編組Tinned annealed copper braid shield
テープTape
半硬質ビニル絶縁体Semi-rigid PVC insulation
耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)
・多心ケーブル/Multi core cable
・多対ケーブル/Multi pair cable
○内数字は識別表1の線番を示す。/Figures ○ indicate core number in the identification table 1.
※短点は1mm、長点は2mm、間隔1mm、ピッチ約12mm
※A short point is 1mm, the length point is 2mm, the interval is 1mm, and the pitch is about 12mm.
2
1
2
1
3
2
14
3
4C
3C2C
※短点は1mm、長点は2mm、間隔1mm、ピッチ約12mm
○内数字は識別表2の対番を示す。/Figures ○ indicate pair number in the identification table 2.
※A short point is 1mm, the length point is 2mm, the interval is 1mm, and the pitch is about 12mm.
表面印字
表面印字
表面印字 Surface Marking
E176892 (UL) CMX □□AWG 75℃ or AWM 2464 80℃ 300V VW-1 or c(UL)CMH □□AWG 75℃ or AWM ⅡA 80℃ 300V FT1 TAIYO LF
対象規格
RoHS
認 証 Certification適合規格 Applicable standard形式記号 Official symbol定格電圧 Voltage rating定格温度 Temperature rating導 体 Conductor難 燃 性 Flame rating
UL CMXUL 444CMX300V75℃UL 444VW-1
cUL CMHCSA C22.2 No.214
CMH300V75℃
CSA C22.2 No.214FT1
UL AWMUL 758
UL STYLE 2464300V80℃UL 758VW-1
cUL AWMCSA C22.2 No.210CSA AWM ⅡA
300V80℃
CSA C22.2 No.210FT1
RoHS対応品
CMX/2464-1061/ⅡA-SB LF
CMX/2464-1061/ⅡA-SB LF
海外規格ケーブル
海外規格ケーブル
多対ケーブル耐 熱 性 ★★★耐 油 性 ★★★★★耐ノイズ性 ★★★★難 燃 性 ★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。
多心ケーブル耐 熱 性 ★★★耐 油 性 ★★★★★耐ノイズ性 ★★★難 燃 性 ★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。
1P2P3P4P5P6P7P8P10P12P15P18P20P25P30P3P4P5P6P7P8P10P12P15P18P20P25P30P
4.55.35.96.36.77.27.28.28.29.010.010.511.512.312.86.46.97.47.97.99.19.110.111.111.612.913.814.3
2740485560707585951101351551702002355565759095110120145175200230270305
2.21.71.41.21.21.01.00.90.90.70.70.60.60.60.52.42.12.01.71.71.51.51.21.21.11.11.00.9
2C3C4C
24(0.22㎟) 7/0.203 0.61 0.27 97.5 10 20001.15 0.9
4.85.05.3
313541
3.73.22.9
26(0.14㎟) 7/0.16 0.48 0.26 146 10 20001.00 0.9
24(0.22㎟) 7/0.203 0.61 0.27 97.5 10 20001.15 0.9
許容電流構造表 Construction table
●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)
301.00
400.89
500.77
600.63
700.45
80-
90-
100-
販売標準長 Standard sale length100m 100m
●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)
電 線 数 No. of cables電流減少係数 Adjustment factors
2~30.70
40.63
5~60.56
7~150.49
16~400.43
61~0.34
41~600.39
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。
・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。
・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.
・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.
線心数No. of cores サイズ
Size(AWG)
構成Construction(本/mm)
導 体Conductor
半硬質ビニル絶縁体Semi-rigid PVC insulation
電気特性Electrical Characteristics
外径Outside diameter(mm)
厚さThickness(mm)
導体抵抗Conductor resistance(Ω/km20℃)
絶縁抵抗Insulation resistance(MΩkm20℃)
耐電圧Electrical strength(V/1min.)
外径Outside diameter(mm)
概算質量Approx.weight(kg/km)
耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath
厚さThickness(mm)
外径Overall diameter 約approx(mm)
許容電流Allowable ampacity(A)
対 数No. of pairs サイズ
Size(AWG)
構成Construction(本/mm)
導 体Conductor
半硬質ビニル絶縁体Semi-rigid PVC insulation
電気特性Electrical Characteristics
外径Outside diameter(mm)
厚さThickness(mm)
導体抵抗Conductor resistance(Ω/km20℃)
絶縁抵抗Insulation resistance(MΩkm20℃)
耐電圧Electrical strength(V/1min.)
外径Outside diameter(mm)
概算質量Approx.weight(kg/km)
耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath
厚さThickness(mm)
外径Overall diameter 約approx(mm)
許容電流Allowable ampacity(A)
RoHS対応品CMX/2464-1061/ⅡA-SB LF電子機器配線用ケーブル Electronic equipment cable
対象規格
RoHS
CMX/2464-1061/ⅡA-SB LF
CMX/2464-1061/ⅡA-SB LF
海外規格ケーブル
海外規格ケーブル
CMX/2464-1007/ⅡA-SB LF
UL、cUL共用。(カテゴリー AVLV2, AVLV7, DUZX, DUZX7)
UL VW-1、cUL FT1の難燃対応。
耐油耐熱柔軟性ビニルシース材を使用。
リスティング規格であるCMXを取得しておりNFPA70,79に対応。
Standard UL, cUL.(Category AVLV2,AVLV7,DUZX,DUZX7)
Flame resisting : UL VW-1, cUL FT1.
Oil, heat resistant and flexible PVC sheath material is used.
CMX that is the listing standard is acquired and it corresponds to NFPA70,79.
●
●
●
●
●
●
●
●
電子機器配線用ケーブルElectronic equipment cable
・多心ケーブル/Multi core cable
(1)22、20AWGの場合/For 22 and 20AWG
2
14
3
4C
10C
3
1
2
7
10 4
8 6
9 5
2
1
2
1
3
3C2C
○内数字は識別表1の線番を示す。/Figures ○ indicate core number in the identification table 1.
・多対ケーブル/Multi pair cable
2
14
3
4P
10P
3
1
2
7
10 4
8 6
9 52
1
3
3P
○内数字は識別表2の対番を示す。/Figures ○ indicate pair number in the identification table 2.
特徴 Features
構造図 Construction figure
識別 Identification
耐熱PVC絶縁体Heat resistant PVC insulation
導体(すずめっき軟銅より線)Tinned annealed copperstranded conductors
テープTape
耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)
すずめっき軟銅線編組Tinned annealed copper braid shield
線番161718192021222324252627282930
絶縁体色橙薄灰白黄桃橙薄灰白黄桃橙薄灰白黄桃
ドットマーク線番123456789101112131415
絶縁体色橙薄灰白黄桃橙薄灰白黄桃橙薄灰白黄桃
ドットマーク
(連続)(連続)(連続)(連続)(連続)
橙
薄灰
白
黄
桃
橙
薄灰
白
黄
桃
対番 絶縁体色16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
橙
薄灰
白
黄
桃
ドットマーク
(連続)(連続)(連続)(連続)(連続)(連続)(連続)(連続)(連続)(連続)
橙
薄灰
白
黄
桃
橙
薄灰
白
黄
桃
対番 絶縁体色1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
橙
薄灰
白
黄
桃
ドットマーク
●識別表2/Identification table 2
●識別表1/Identification table 1
第1種心線
第2種心線
●対例
黒色のドットマーク/Black dot mark
赤色のドットマーク/Red dot mark
※短点は1mm、長点は2mm、間隔1mm、 ピッチ約12mm
※A short point is 1mm, the length point is 2mm, the interval is 1mm, and the pitch is about 12mm.
絶縁体の色は、第1、第2芯線とも同色とする。/The color of the insulator, the 1stand 2nd core is the same color.
第1、第2芯線のドットマークの色は、黒、赤とする。/The color of the first kind and the 2nd kind of dot mark is a black and red.
表面印字
表面印字 Surface Marking
E176892(UL) CMX □□AWG 75℃ or AWM 2464 80℃ 300V VW-1 or c(UL)CMH □□AWG75℃ or AWM ⅡA 80℃ 300V FT1 TAIYO LF
対象規格
RoHS
認 証 Certification適合規格 Applicable standard形式記号 Official symbol定格電圧 Voltage rating定格温度 Temperature rating導 体 Conductor難 燃 性 Flame rating
UL CMXUL 444CMX300V75℃UL 444VW-1
cUL CMHCSA C22.2 No.214
CMH300V75℃
CSA C22.2 No.214FT1
UL AWMUL 758
UL STYLE 2464300V80℃UL 758VW-1
cUL AWMCSA C22.2 No.210CSA AWM ⅡA
300V80℃
CSA C22.2 No.210FT1
RoHS対応品
CMX/2464-1007/ⅡA-SB LF
CMX/2464-1007/ⅡA-SB LF
海外規格ケーブル
海外規格ケーブル
多対ケーブル耐 熱 性 ★★★耐 油 性 ★★★★★耐ノイズ性 ★★★★難 燃 性 ★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。
多心ケーブル耐 熱 性 ★★★耐 油 性 ★★★★★耐ノイズ性 ★★★難 燃 性 ★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。
構造表 Construction table識別 Identification
2C3C4C2C3C4C6C8C10C12C16C20C30C2C3E4E6C10C20C30C2C3E4E6C
6.16.36.86.46.77.28.39.510.310.611.612.815.97.07.37.89.111.314.217.67.68.08.610.2
44506050607510013015016521026038565809513019535052085105125175
4.53.93.46.05.24.63.93.43.22.72.42.42.010.59.18.16.85.64.23.512.711.09.88.3
3P4P5P6P8P10P12P15P20P
8.49.19.910.712.412.413.916.318.8
95110130150185205250335420
2.92.52.42.01.81.81.51.51.3
22(0.34m㎡)17/0.16 0.76 0.46 57.5 10 20001.68 1.0
20(0.53m㎡)21/0.18 0.95 0.46 36.2 10 20001.87 1.0
18(0.89m㎡)35/0.18 1.2 0.46 22.8 10 20002.1 1.0
16(1.38m㎡)26/0.26 1.5 0.46 14.3 10 20002.4 1.0
22(0.34m㎡)17/0.16 0.76 0.46 57.5 10 20001.68
1.0
1.5
1.5
1.5
許容電流
●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)
301.00
400.89
500.77
600.63
700.45
80-
90-
100-
販売標準長 Standard sale length100m 100m
●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)
電 線 数 No. of cables電流減少係数 Adjustment factors
2~30.70
40.63
5~60.56
7~150.49
16~400.43
61~0.34
41~600.39
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。
・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。
・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.
・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.
線心数No. of cores サイズ
Size(AWG)
構成Construction(本/mm)
耐熱ビニル絶縁体Heat resistant PVC insulation
電気特性Electrical Characteristics
外径Outside diameter(mm)
厚さThickness(mm)
導体抵抗Conductor resistance(Ω/km20℃)
絶縁抵抗Insulation resistance(MΩkm20℃)
耐電圧Electrical strength(V/1min.)
外径Outside diameter(mm)
概算質量Approx.weight(kg/km)
耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath
厚さThickness(mm)
外径Overall diameter 約approx(mm)
許容電流Allowable ampacity(A)
線心数No. of cores サイズ
Size(AWG)
構成Construction(本/mm)
耐熱ビニル絶縁体Heat resistant PVC insulation
電気特性Electrical Characteristics
外径Outside diameter(mm)
厚さThickness(mm)
導体抵抗Conductor resistance(Ω/km20℃)
絶縁抵抗Insulation resistance(MΩkm20℃)
耐電圧Electrical strength(V/1min.)
外径Outside diameter(mm)
概算質量Approx.weight(kg/km)
耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath
厚さThickness(mm)
外径Overall diameter 約approx(mm)
許容電流Allowable ampacity(A)
導 体Conductor
導 体Conductor・2C~4C
(2)18、16AWGの場合(2、3、4Cの20AWGも含む)/ (.GWA61 dna 81 roF 20AWG of 2, 3, 4C)
2C
・6C~
4E3E
白
黒
白
黒
Y/G 赤 白
黒Y/G
10C 20C
3
1
2
7
10 4
8 6
9 5
89
10
11
12
1314
20
19
18
17
1615
127
36
45
6C
12
3
6
54
例
○内数字は黒色絶縁体上の白色ナンバリングを示す。/Figures in ○ indicate white numbering on black insulator.
※Y/G線は緑地に黄色の3本埋込色帯(40~60%)となります。/Y/G indicates green core with yellow stripe(40~60%).
RoHS対応品
○
○は受注生産品となります。/○:Order production
CMX/2464-1007/ⅡA-SB LF電子機器配線用ケーブル Electronic equipment cable
対象規格
RoHS
CMX/2464-1007/ⅡA-SB LF
CMX/2464-1007/ⅡA-SB LF
UE/2517(N) LF電子機器配線用ケーブル Electronic equipment cable
●
●
●
●
●
●
●
●
UL、cUL共用。(カテゴリ AVLV2、AVLV7)
UL VW-1、cUL FT1の難燃対応。
耐油耐熱柔軟性ビニルシース材を使用。
CEマーキング適合宣言製品(TUV認定品)。(TUV証明書No.J2150115)
・・・・
Standard UL, cUL.(Category AVLV2, AVLV7)
Flame resisting : UL VW-1, cUL FT1.
Oil, heat resistant and flexible PVC sheath material is used.
CE marking(TUV recognition product).(Certificate of TUV No.J2150115)
・・・・
E67647 AWM 2517 105℃ 300V VW-1 TAIYO AWM ⅡA 105℃ 300V FT1 TAIYO CE VV5 300/500V LF
12C
2
14
3
4C
2
1
3
4512
611
710
89
2C3C4C5C7C12C2C3C4C5C7C12C
7.57.98.69.411.213.87.98.49.19.912.114.9
6070851051352156580100120165260
7.56.55.85.34.63.411.29.78.77.96.95.1
20(0.53㎟) 21/0.18 0.95 0.85 36.2 10 20002.7
1.0
19(0.79㎟) 31/0.18 1.2 0.85 26.7 10 20002.9
1.0
1.21.4
1.31.1
RoHS
認 証 Certification
適合規格 Applicable standard
形式記号 Official symbol
定格電圧 Voltage rating定格温度 Temperature rating
導 体 Conductor
難 燃 性 Flame rating
UL AWM
UL 758
UL STYLE 2517
300V105℃
UL 758
VW-1
cUL AWM
CSA C22.2 No.210
CSA AWM ⅡA
300V105℃
CSA C22.2 No.210
FT1
TUV.CEマーキングHD21.13
(IEC60227-7)H05VV5-F
(60227 IEC 75)300/500V70℃
HD383 Class 5(IEC60228 Class 5) EN50264-2-1(IEC60332-1)
特徴 Features 構造表 Construction table
構造図 Construction figure
表面印字 Surface Marking
識別 Identification
耐熱PVC絶縁体Heat resistant PVC insulation
導体(すずめっき軟銅より線)Tinned annealed copperstranded conductors
テープTape
耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)
許容電流
●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)
●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)
電 線 数 No. of cables電流減少係数 Adjustment factors
2~30.70
40.63
5~60.56
7~150.49
16~400.43
61~0.34
41~600.39
Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。
・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。
・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.
・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.
販売標準長 Standard sale length
線心数No. of cores サイズ
Size(AWG)
構成Construction(本/mm)
導 体Conductor
耐熱ビニル絶縁体Heat resistant PVC insulation
電気特性Electrical Characteristics
外径Outside diameter(mm)
厚さThickness(mm)
導体抵抗Conductor resistance(Ω/km20℃)
絶縁抵抗Insulation resistance(MΩkm20℃)
耐電圧Electrical strength(V/1min.)
外径Outside diameter(mm)
概算質量Approx.weight(kg/km)
耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath
厚さThickness(mm)
外径Overall diameter 約approx(mm)
許容電流Allowable ampacity(A)
301.00
400.93
500.86
600.77
700.68
800.58
900.45
1000.26
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
例
○内数字は黒色絶縁体上の白色ナンバリングを示す。/Figures in ○ indicate white numbering on black insulator.
100m(切断販売が可能なサイズもございます。詳細は窓口にお問い合わせ下さい。)
100m(There are sizes that can be the cutting sales, too. Please inquire of sales staff in detail.)
表面印字
RoHS対応品
※上記UL、CSA規格の耐電圧試験の他に2000V/5分間の試験を実施しております。 ※The examination of 2000V/5 minute besides the withstand voltage test on above mentioned UL standard and the CSA standard is executed.
・・
対象規格
UE/2517(N) LF
UE/2517(N) LF
海外規格ケーブル
海外規格ケーブル
耐 熱 性 ★★★★★耐 油 性 ★★★★★耐ノイズ性 ★難 燃 性 ★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。
UE/2517(N)[Y/G]LF電子機器配線用ケーブル Electronic equipment cable
●
●
●
●
●
●
●
●
UL、cUL共用。(カテゴリ AVLV2、AVLV7)
UL VW-1、cUL FT1の難燃対応。
耐油耐熱柔軟性ビニルシース材を使用。
CEマーキング適合宣言製品(TUV認定品)。(TUV証明書No.J2150115)・・
Standard UL, cUL.(Category AVLV2, AVLV7)
Flame resisting : UL VW-1, cUL FT1.
Oil, heat resistant and flexible PVC sheath material is used.
CE marking(TUV recognition product).(Certificate of TUV No.J2150115)
・・・・
E67647 AWM 2517 105℃ 300V VW-1 TAIYO AWM ⅡA 105℃ 300V FT1 TAIYO CE VV5 300/500V LF
13E4E
2
14
3
512
611
710
89
Y/G
2
1
3
Y/G
3E4E5E7E13E3E4E5E7E13E
20(0.53㎟)
19(0.79㎟)
21/0.18
31/0.18
0.95
1.2
0.85
0.85
36.2
26.7
10
10
2000
2000
2.7
2.9
1.0
1.11.4
1.0
1.21.4
7.98.69.411.214.78.49.19.912.115.6
708510513523580100120165280
6.55.85.34.63.49.78.77.96.95.1
※線心数表記“E”は、同等サイズの[Y/G]アース線入りとなります。 (例)3E×20AWG:2×20AWG+1×20AWG(アース)
※Core number mark “E” has the [Y/G] earth cable of an equal size.
特徴 Features 構造表 Construction table
構造図 Construction figure
表面印字 Surface Marking
識別 Identification
耐熱PVC絶縁体Heat resistant PVC insulation
導体(すずめっき軟銅より線)Tinned annealed copperstranded conductors
テープTape
耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)
100m(切断販売が可能なサイズもございます。詳細は窓口にお問い合わせ下さい。)
100m(There are sizes that can be the cutting sales, too. Please inquire of sales staff in detail.)
許容電流
●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)
●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)
電 線 数 No. of cables電流減少係数 Adjustment factors
2~30.70
40.63
5~60.56
7~150.49
16~400.43
61~0.34
41~600.39
Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。
・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。
・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.
・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.
販売標準長 Standard sale length
線心数No. of cores サイズ
Size(AWG)
構成Construction(本/mm)
導 体Conductor
耐熱ビニル絶縁体Heat resistant PVC insulation
電気特性Electrical Characteristics
外径Outside diameter(mm)
厚さThickness(mm)
導体抵抗Conductor resistance(Ω/km20℃)
絶縁抵抗Insulation resistance(MΩkm20℃)
耐電圧Electrical strength(V/1min.)
外径Outside diameter(mm)
概算質量Approx.weight(kg/km)
耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath
厚さThickness(mm)
外径Overall diameter 約approx(mm)
許容電流Allowable ampacity(A)
301.00
400.93
500.86
600.77
700.68
800.58
900.45
1000.26
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
例
○内数字は黒色絶縁体上の白色ナンバリングを示す。/Figures in ○ indicate white numbering on black insulator.
※Y/G線は緑地に黄色の3本埋込色帯(30~50%)となります。/Y/G indicates green core with yellow stripe(30~50%).
表面印字
RoHS対応品
※上記UL、CSA規格の耐電圧試験の他に2000V/5分間の試験 を実施しております。
※The examination of 2000V/5 minute besides the withstand voltage test on above mentioned UL standard and the CSA standard is executed.
RoHS
認 証 Certification
適合規格 Applicable standard
形式記号 Official symbol
定格電圧 Voltage rating定格温度 Temperature rating
導 体 Conductor
難 燃 性 Flame rating
UL AWM
UL 758
UL STYLE 2517
300V105℃
UL 758
VW-1
cUL AWM
CSA C22.2 No.210
CSA AWM ⅡA
300V105℃
CSA C22.2 No.210
FT1
TUV.CEマーキングHD21.13
(IEC60227-7)H05VV5-F
(60227 IEC 75)300/500V70℃
HD383 Class 5(IEC60228 Class 5) EN50264-2-1(IEC60332-1)
対象規格・・
UE/2517(N)[Y/G]LF
UE/2517(N)[Y/G]LF
海外規格ケーブル
海外規格ケーブル
耐 熱 性 ★★★★★耐 油 性 ★★★★★耐ノイズ性 ★難 燃 性 ★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。
UE/2517-SB(N)LF電子機器配線用ケーブル Electronic equipment cable
E67647 AWM 2517 105℃ 300V VW-1 TAIYO AWM ⅡA 105℃ 300V FT1 TAIYO CE VV5 LF
12C
2
14
3
4C
2
1
3
4512
611
710
89
2C3C4C5C7C12C2C3C4C5C7C12C
8.18.59.210.111.714.08.59.09.810.612.415.9
809511014017525590110130160200330
7.56.55.85.34.63.411.29.78.77.96.95.1
20(0.53㎟) 21/0.18 0.95 0.85 36.2 10 20002.7 1.0
19(0.79㎟) 31/0.18 1.2 0.85 26.7 10 20002.9 1.0
1.5
RoHS
認 証 Certification
適合規格 Applicable standard
形式記号 Official symbol
定格電圧 Voltage rating定格温度 Temperature rating
導 体 Conductor
難 燃 性 Flame rating
UL AWM
UL 758
UL STYLE 2517
300V105℃
UL 758
VW-1
cUL AWM
CSA C22.2 No.210
CSA AWM ⅡA
300V105℃
CSA C22.2 No.210
FT1
CEマーキングHD21.13
(IEC60227-7)H05VV5-F
(60227 IEC 75)300/500V70℃
HD383 Class 5(IEC60228 Class 5) EN50264-2-1(IEC60332-1)
対象規格
特徴 Features 構造表 Construction table
構造図 Construction figure
表面印字 Surface Marking
識別 Identification
耐熱PVC絶縁体Heat resistant PVC insulation
導体(すずめっき軟銅より線)Tinned annealed copperstranded conductors
テープTape
耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)
すずめっき軟銅線編組Tinned annealed copper braid shield
許容電流
●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)
●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)
電 線 数 No. of cables電流減少係数 Adjustment factors
2~30.70
40.63
5~60.56
7~150.49
16~400.43
61~0.34
41~600.39
Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。
・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。
・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.
・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.
販売標準長 Standard sale length
線心数No. of cores サイズ
Size(AWG)
構成Construction(本/mm)
導 体Conductor
耐熱ビニル絶縁体Heat resistant PVC insulation
電気特性Electrical Characteristics
外径Outside diameter(mm)
厚さThickness(mm)
導体抵抗Conductor resistance(Ω/km20℃)
絶縁抵抗Insulation resistance(MΩkm20℃)
耐電圧Electrical strength(V/1min.)
外径Outside diameter(mm)
概算質量Approx.weight(kg/km)
耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath
厚さThickness(mm)
外径Overall diameter 約approx(mm)
許容電流Allowable ampacity(A)
301.00
400.93
500.86
600.77
700.68
800.58
900.45
1000.26
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
例
○内数字は黒色絶縁体上の白色ナンバリングを示す。/Figures in ○ indicate white numbering on black insulator.
●
●
●
●
●
●
●
●
UL、cUL共用。(カテゴリ AVLV2、AVLV7)
UL VW-1、cUL FT1の難燃対応。
耐油耐熱柔軟性ビニルシース材を使用。
CEマーキング適合宣言製品。
Standard UL, cUL.(Category AVLV2, AVLV7)
Flame resisting : UL VW-1, cUL FT1.
Oil, heat resistant and flexible PVC sheath material is used.
CE marking.
100m(切断販売が可能なサイズもございます。詳細は窓口にお問い合わせ下さい。)
100m(There are sizes that can be the cutting sales, too. Please inquire of sales staff in detail.)
表面印字
RoHS対応品
※上記UL、CSA規格の耐電圧試験の他に2000V/5分間の試験 を実施しております。
※The examination of 2000V/5 minute besides the withstand voltage test on above mentioned UL standard and the CSA standard is executed.
UE/2517-SB(N)LF
UE/2517-SB(N)LF
海外規格ケーブル
海外規格ケーブル
耐 熱 性 ★★★★★耐 油 性 ★★★★★耐ノイズ性 ★★★難 燃 性 ★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。
UE/2517-SB(N)[Y/G]LF電子機器配線用ケーブル Electronic equipment cable
E67647 AWM 2517 105℃ 300V VW-1 TAIYO AWM ⅡA 105℃ 300V FT1 TAIYO CE VV5 LF
※線心数表記“E”は、同等サイズの[Y/G]アース線入りとなります。 (例)3E×20AWG:2×20AWG+1×20AWG(アース)
※Core number mark “E” has the [Y/G] earth cable of an equal size.
13E4E
2
14
3
512
611
710
89
Y/G
2
1
3
Y/G
3E4E5E7E13E3E4E5E7E13E
2000
2000
8.59.210.111.714.79.09.810.612.416.6
95110140175275110130160200350
7.56.55.84.93.411.29.78.77.35.1
20(0.53㎟) 21/0.18 0.95 0.85 36.2 102.7 1.0
19(0.79㎟) 31/0.18 1.2 0.85 26.7 102.9 1.0
1.5
RoHS
認 証 Certification
適合規格 Applicable standard
形式記号 Official symbol
定格電圧 Voltage rating定格温度 Temperature rating
導 体 Conductor
難 燃 性 Flame rating
UL AWM
UL 758
UL STYLE 2517
300V105℃
UL 758
VW-1
cUL AWM
CSA C22.2 No.210
CSA AWM ⅡA
300V105℃
CSA C22.2 No.210
FT1
CEマーキングHD21.13
(IEC60227-7)H05VV5-F
(60227 IEC 75)300/500V70℃
HD383 Class 5(IEC60228 Class 5) EN50264-2-1(IEC60332-1)
対象規格
特徴 Features 構造表 Construction table
構造図 Construction figure
表面印字 Surface Marking
識別 Identification
耐熱PVC絶縁体Heat resistant PVC insulation
導体(すずめっき軟銅より線)Tinned annealed copperstranded conductors
テープTape
耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)
すずめっき軟銅線編組Tinned annealed copper braid shield
許容電流
●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)
●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)
電 線 数 No. of cables電流減少係数 Adjustment factors
2~30.70
40.63
5~60.56
7~150.49
16~400.43
61~0.34
41~600.39
Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。
・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。
・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.
・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.
販売標準長 Standard sale length100m(切断販売が可能なサイズもございます。詳細は窓口にお問い合わせ下さい。)
100m(There are sizes that can be the cutting sales, too. Please inquire of sales staff in detail.)
線心数No. of cores サイズ
Size(AWG)
構成Construction(本/mm)
導 体Conductor
耐熱ビニル絶縁体Heat resistant PVC insulation
電気特性Electrical Characteristics
外径Outside diameter(mm)
厚さThickness(mm)
導体抵抗Conductor resistance(Ω/km20℃)
絶縁抵抗Insulation resistance(MΩkm20℃)
耐電圧Electrical strength(V/1min.)
外径Outside diameter(mm)
概算質量Approx.weight(kg/km)
耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath
厚さThickness(mm)
外径Overall diameter 約approx(mm)
許容電流Allowable ampacity(A)
301.00
400.93
500.86
600.77
700.68
800.58
900.45
1000.26
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
例
○内数字は黒色絶縁体上の白色ナンバリングを示す。/Figures in ○ indicate white numbering on black insulator.
※Y/G線は緑地に黄色の3本埋込色帯(30~50%)となります。/Y/G indicates green core with yellow stripe(30~50%).
●
●
●
●
●
●
●
●
UL、cUL共用。(カテゴリ AVLV2、AVLV7)
UL VW-1、cUL FT1の難燃対応。
耐油耐熱柔軟性ビニルシース材を使用。
CEマーキング適合宣言製品。
Standard UL, cUL.(Category AVLV2, AVLV7)
Flame resisting : UL VW-1, cUL FT1.
Oil, heat resistant and flexible PVC sheath material is used.
CE marking.
表面印字
RoHS対応品
※上記UL、CSA規格の耐電圧試験の他に2000V/5分間の試験 を実施しております。
※The examination of 2000V/5 minute besides the withstand voltage test on above mentioned UL standard and the CSA standard is executed.
UE/2517 SB(N)[Y/G]LF
UE/2517 SB(N)[Y/G]LF
海外規格ケーブル
海外規格ケーブル
耐 熱 性 ★★★★★耐 油 性 ★★★★★耐ノイズ性 ★★★難 燃 性 ★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。
UE/2501(N)/TC LFケーブルトレイ、レースウェイ配線用、電子機器配線用ケーブルFor tray cable, race way and electronic equipment cable
●
●
●
●
●
●
●
●
●
●
●
●
●
●
※12AWG以上は軟銅より線/12AWG or more are stranded annealed coppers.
(1)18~10AWGの場合/18~10AWG cables
E209288(UL)TC 600V 90℃ DRY 75℃ WET サイズ/線心数 or MTW 600V サイズ/線心数 FLEXING VW-1 or AWM 2501 VW-1 E67647 AWM ⅡA/B 105℃ 600V FT1 TAIYO CE VV5 300/500V <PS>E ** LF
(2)8~6AWGの場合/8~6AWG cables
E209288(UL)TC 600V 90℃ DRY 75℃ WET サイズ/線心数 or MTW 600V サイズ/線心数 VW-1 or AWM 2501 VW-1 E67647 AWM ⅡA/B 105℃ 600V FT1 TAIYO CE VV5 300/500V LF
2C3C4C2C3C4C2C3C4C10C2C3C4C2C3C4C2C3C4C2C3C4C
9.49.910.610.110.611.410.811.412.318.111.812.413.513.213.915.218.820.023.121.223.525.8
951151351151401701401752104451802252752403053854205457455757951020
12.711.09.815.013.011.621.018.216.211.227.023.420.836.731.828.462.253.948.182.571.563.8
10C
1
9
10
5
8 2
6 4
7 32
14
3
4C
例
・TC、MTW
18(0.89㎟) 35/0.18 1.2 0.85 22.8 60 20002.9 1.7
16(1.38㎟) 26/0.26 1.5 0.85 14.3 60 20003.2 1.7
14(2.18㎟) 41/0.26 1.9 0.85 9.01 60 20003.6 1.7
12(3.34㎟) 66/0.26 2.4 0.85 5.45 50 20004.1 1.7
10(5.41㎟) 104/0.26 3.1 0.85 3.44 50 20004.8 1.7
1.78(8.44㎟)7/15/0.32 4.2 1.7 2.41 50 25007.6
6(13.5㎟)7/24/0.32 5.3 1.7 1.53 50 25008.7 2.3
2.31.8
特徴 Features
構造図 Construction figure
表面印字 Surface Marking
識別 Identification
耐熱PVC絶縁体Heat resistant PVC insulation
導体(軟銅または、すずめっき軟銅より線)※Annealed or tinned annealed copperstranded conductors
テープTape
耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)
線心数No. of cores サイズ
Size(AWG)
構成Construction(本/mm)
導 体Conductor
耐熱ビニル絶縁体Heat resistant PVC insulation
電気特性Electrical Characteristics
外径Outside diameter(mm)
厚さThickness(mm)
導体抵抗Conductor resistance(Ω/km20℃)
絶縁抵抗Insulation resistance(MΩkm20℃)
耐電圧Electrical strength(V/1min.)
外径Outside diameter(mm)
概算質量Approx.weight(kg/km)
耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath
厚さThickness(mm)
外径Overall diameter 約approx(mm)
許容電流Allowable ampacity(A)
構造表 Construction table
許容電流
●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)
301.00
400.91
500.82
600.71
700.58
800.41
90-
100-
販売標準長 Standard sale length100m 100m
●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)
電 線 数 No. of cables電流減少係数 Adjustment factors
2~30.70
40.63
5~60.56
7~150.49
16~400.43
61~0.34
41~600.39
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
・2501301.00
400.93
500.86
600.77
700.68
800.58
900.45
1000.26
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。
・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。
・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.
・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.
RoHS
認 証 Certification
適合規格 Applicable standard
形式記号 Official symbol
定格電圧 Voltage rating定格温度 Temperature rating
導 体 Conductor
難 燃 性 Flame rating
UL AWM.cUL AWM
UL 758CSA C22.2 No.210UL STYLE 2501CSA AWM ⅡA/B600V105℃UL 758
CSA C22.2 No.210VW-1.FT1
UL TC
UL 1277
TC
600VDRY90℃ WET75℃
UL 1277
Vertical-Tray Flame Test
UL MTW
UL 1063
MTW
600VDRY90℃ WET60℃
UL 1063
VW-1
TUV.CEマーキング
HD21.13(IEC60227-7)H05VV5-F
(60227 IEC 75)300/500V70℃
HD383 Class 5(IEC60228 Class 5) EN50264-2-1(IEC60332-1)
電気用品安全法(18~10AWGのみ)電気用品の技術上の基準を定める省令第1項の別表第一ビニルキャブタイヤコード300V60℃
JIS C 3102JIS C 3152
JIS C 3005の4.26.2のb)
対象規格
表面印字
UL、cUL共用。(カテゴリ QPOR、AVLV2、ZKHZ、AVLV7)
UL VW-1、cUL FT1の難燃対応。
UL垂直トレイ難燃試験に合格。
耐油耐熱柔軟性ビニルシース材を使用。
CEマーキング適合宣言製品(TUV認定品)。(TUV証明書No.(18~12AWG)J2051249)(TUV証明書No.(10~6AWG)J2051252)
トレイケーブルとしても使用可能。
10AWG以下は、電気用品安全法に適合しています。
・・・・・・
Standard UL, cUL.(Category QPOR, AVLV2, ZKHZ, AVLV7)
Flame resisting : UL VW-1, cUL FT1.
It passes Vertical-Tray Flame Test of UL.
Oil, heat resistant and flexible PVC sheath material is used.
CE marking(TUV recognition product).(Certificate of TUV No.(18~20AWG)J2051249)(Certificate of TUV No.(10~6AWG)J2051252)
It is possible to use it as a tray cable.
10AWG or less cables have suited Product Safety of Electrical Appliance and Materials.
・・・・・・
RoHS対応品
※上記UL、CSA規格の耐電圧試験の他に2000V/5分間の試験 を実施しております。
※The examination of 2000V/5 minute besides the withstand voltage test on above mentioned UL standard and the CSA standard is executed.
・・
○内数字は黒色絶縁体上の白色ナンバリングを示す。/Figures in ○ indicate white numbering on black insulator.
UE/2501(N)/TC LF
UE/2501(N)/TC LF
海外規格ケーブル
海外規格ケーブル
耐 熱 性 ★★★★★耐 油 性 ★★★★★耐ノイズ性 ★難 燃 性 ★★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。
UE/2501-SB(N)/TC LFケーブルトレイ、レースウェイ配線用、電子機器配線用ケーブルFor tray cable, race way and electronic equipment cable
(1)18~10AWGの場合/18~10AWG cables
E209288(UL)TC 600V 90℃ DRY 75℃ WET サイズ/線心数 or MTW 600V サイズ/線心数 FLEXING VW-1 or AWM 2501 VW-1 E67647 AWM ⅡA/B 105℃ 600V FT1 TAIYO CE VV5 300/500V <PS>E ** LF
(2)8~6AWGの場合/8~6AWG cables
E209288(UL)TC 600V 90℃ DRY 75℃ WET サイズ/線心数 or MTW 600V サイズ/線心数 VW-1 or AWM 2501 VW-1 E67647 AWM ⅡA/B 105℃ 600V FT1 TAIYO CE VV5 300/500V LF
2
14
3
4C
23
3C
1
6C
12
3
6
54
2C3C4C6C2C3C4C2C3C4C2C3C4C2C3C4C3C4C3C4C
10.010.511.313.010.711.312.111.512.113.012.513.114.313.914.716.021.023.924.326.6
1251451702301451752101752102552202653302853604456408459001130
12.711.09.88.315.013.011.621.018.216.227.023.420.836.731.828.453.948.171.563.8
18(0.89㎟) 35/0.18 1.2 0.85 22.8 60 20002.9 1.7
16(1.38㎟) 26/0.26 1.5 0.85 14.3 60 20003.2 1.7
14(2.18㎟) 41/0.26 1.9 0.85 9.01 60 20003.6 1.7
12(3.34㎟) 66/0.26 2.4 0.85 5.45 50 20004.1 1.7
10(5.41㎟)104/0.26 3.1 0.85 3.44 50 20004.8 1.7
1.82.3
2.3
8(8.44㎟)7/15/0.32 4.2 1.7 2.41 50 25007.6
6(13.5㎟)7/24/0.32 5.3 1.7 1.53 50 25008.7
特徴 Features
構造図 Construction figure
表面印字 Surface Marking
識別 Identification
耐熱PVC絶縁体Heat resistant PVC insulation
導体(軟銅または、すずめっき軟銅より線)※Annealed or tinned annealed copperstranded conductors
テープTape
耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)
すずめっき軟銅線編組Tinned annealed copper braid shield
構造表 Construction table
・TC、MTW
許容電流
●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)
301.00
400.91
500.82
600.71
700.58
800.41
90-
100-
販売標準長 Standard sale length100m 100m
●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)
電 線 数 No. of cables電流減少係数 Adjustment factors
2~30.70
40.63
5~60.56
7~150.49
16~400.43
61~0.34
41~600.39
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
・2501301.00
400.93
500.86
600.77
700.68
800.58
900.45
1000.26
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。
・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。
・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.
・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.
線心数No. of cores サイズ
Size(AWG)
構成Construction(本/mm)
導 体Conductor
耐熱ビニル絶縁体Heat resistant PVC insulation
電気特性Electrical Characteristics
外径Outside diameter(mm)
厚さThickness(mm)
導体抵抗Conductor resistance(Ω/km20℃)
絶縁抵抗Insulation resistance(MΩkm20℃)
耐電圧Electrical strength(V/1min.)
外径Outside diameter(mm)
概算質量Approx.weight(kg/km)
耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath
厚さThickness(mm)
外径Overall diameter 約approx(mm)
許容電流Allowable ampacity(A)
例
○内数字は黒色絶縁体上の白色ナンバリングを示す。/Figures in ○ indicate white numbering on black insulator.
●
●
●
●
●
●
●
●
●
●
●
●
●
●
UL、cUL共用。(カテゴリ QPOR、AVLV2、ZKHZ、AVLV7)
UL VW-1、cUL FT1の難燃対応。
UL垂直トレイ難燃試験に合格。
耐油耐熱柔軟性ビニルシース材を使用。
CEマーキング適合宣言製品。
トレイケーブルとしても使用可能。
10AWG以下は、電気用品安全法に適合しています。
Standard UL, cUL.(Category QPOR, AVLV2, ZKHZ, AVLV7)
Flame resisting : UL VW-1, cUL FT1.
It passes Vertical-Tray Flame Test of UL.
Oil, heat resistant and flexible PVC sheath material is used.
CE marking.
It is possible to use it as a tray cable.
10AWG or less cables have suited Product Safety of Electrical Appliance and Materials.
RoHS
認 証 Certification
適合規格 Applicable standard
形式記号 Official symbol
定格電圧 Voltage rating定格温度 Temperature rating
導 体 Conductor
難 燃 性 Flame rating
UL AWM.cUL AWM
UL 758CSA C22.2 No.210UL STYLE 2501CSA AWM ⅡA/B600V105℃UL 758
CSA C22.2 No.210VW-1.FT1
UL TC
UL 1277
TC
600VDRY90℃ WET75℃
UL 1277
Vertical-Tray Flame Test
UL MTW
UL 1063
MTW
600VDRY90℃ WET60℃
UL 1063
VW-1
CEマーキング
HD21.13(IEC60227-7)H05VV5-F
(60227 IEC 75)300/500V70℃
HD383 Class 5(IEC60228 Class 5) EN50264-2-1(IEC60332-1)
電気用品安全法(18~10AWGのみ)電気用品の技術上の基準を定める省令第1項の別表第一ビニルキャブタイヤコード300V60℃
JIS C 3102JIS C 3152
JIS C 3005の4.26.2のb)
対象規格
表面印字
RoHS対応品
※上記UL、CSA規格の耐電圧試験の他に2000V/5分間の試験 を実施しております。
※The examination of 2000V/5 minute besides the withstand voltage test on above mentioned UL standard and the CSA standard is executed.
※12AWG以上は軟銅より線/12AWG or more are stranded annealed coppers.
UE/2501-SB(N)/TC LF
UE/2501-SB(N)/TC LF
海外規格ケーブル
海外規格ケーブル
耐 熱 性 ★★★★★耐 油 性 ★★★★★耐ノイズ性 ★★★難 燃 性 ★★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。
UE/2501E(N)/TC[Y/G] LFケーブルトレイ、レースウェイ配線用、電子機器配線用ケーブルFor tray cable, race way and electronic equipment cable
13E(12C+1E)4E
2
14
3
512
611
710
89
Y/G
2
1
3
Y/G
3E4E
6C+1E10C+1E12C+1E15C+1E20C+1E30C+1E40C+1E3E4E
6C+1E10C+1E12C+1E20C+1E30C+1E40C+1E3E4E7E11E13E21E3E4E7E3E4E7E
9.910.613.615.616.417.219.924.226.910.611.414.516.917.922.826.229.411.412.315.618.619.625.112.413.517.213.915.219.5
1151352303053503955057509351401702753804356909451220175210340490555920225280455305385640
12.711.08.36.85.75.75.14.23.715.013.09.88.06.86.05.04.421.018.213.711.29.58.427.023.417.636.731.824.0
※線心数表記“+1E”の場合、14AWGの[Y/G]アース線入りとなります。 (例)6C+1E×18AWG:6×18AWG+1×14AWG(アース) 線心数表記“E”は、同等サイズの[Y/G]アース線入りとなります。 (例)3E×14AWG:2×14AWG+1×14AWG (アース)
※Core number mark “+1E” has the [Y/G] earth cable of 14AWG size.※Core number mark “E” has the [Y/G] earth cable of an equal size.
(1)6心以下/6 cores or less
(2)7心以上/7 cores or more
E209288(UL)TC 600V 90℃ DRY 75℃ WET サイズ/線心数 or MTW 600V サイズ/線心数 FLEXING VW-1 or AWM 2501 VW-1 E67647 AWM ⅡA/B 105℃ 600V FT1 TAIYO CE VV5 300/500V <PS>E ** LF
E209288(UL)TC 600V 90℃ DRY 75℃ WET サイズ/線心数+サイズ(Y/G)/1C or MTW 600V サイズ/線心数+サイズ(Y/G)/1C FLEXING VW-1 orAWM 2501 VW-1 E67647 AWM ⅡA/B 105℃ 600V FT1 TAIYO CE VV5 300/500V <PS>E ** LF
18(0.89㎟)35/0.18 1.2 0.85 22.8 60 20002.9
1.7
16(1.38㎟)26/0.26 1.5 0.85 14.3 60 20003.2
1.7
1.7
1.7
2.3
2.3
2.3
2.4
14(2.18㎟)41/0.26 1.9 0.85 9.01 60 20003.6
12(3.34㎟)66/0.26 2.4 0.85 5.45 50 20004.1
10(5.41㎟)104/0.26 3.1 0.85 3.44 50 20004.8
1.7
特徴 Features 構造表 Construction table
識別 Identification
表面印字 Surface Marking
構造図 Construction figure耐熱PVC絶縁体Heat resistant PVC insulation
導体(軟銅または、すずめっき軟銅より線)※Annealed or tinned annealed copperstranded conductors
テープTape
耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)
・TC、MTW
許容電流
●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)
301.00
400.91
500.82
600.71
700.58
800.41
90-
100-
●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)
電 線 数 No. of cables電流減少係数 Adjustment factors
2~30.70
40.63
5~60.56
7~150.49
16~400.43
61~0.34
41~600.39
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
・2501301.00
400.93
500.86
600.77
700.68
800.58
900.45
1000.26
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。
・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。
・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.
・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.
販売標準長 Standard sale length100m(切断販売が可能なサイズもございます。詳細は窓口にお問い合わせ下さい。)
100m(There are sizes that can be the cutting sales, too. Please inquire of sales staff in detail.)
線心数No. of cores サイズ
Size(AWG)
構成Construction(本/mm)
導 体Conductor
耐熱ビニル絶縁体Heat resistant PVC insulation
電気特性Electrical Characteristics
外径Outside diameter(mm)
厚さThickness(mm)
導体抵抗Conductor resistance(Ω/km20℃)
絶縁抵抗Insulation resistance(MΩkm20℃)
耐電圧Electrical strength(V/1min.)
外径Outside diameter(mm)
概算質量Approx.weight(kg/km)
耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath
厚さThickness(mm)
外径Overall diameter 約approx(mm)
許容電流Allowable ampacity(A)
RoHS
認 証 Certification
適合規格 Applicable standard
形式記号 Official symbol
定格電圧 Voltage rating定格温度 Temperature rating
導 体 Conductor
難 燃 性 Flame rating
UL AWM.cUL AWMUL 758
CSA C22.2 No.210UL STYLE 2501CSA AWM ⅡA/B600V105℃UL 758
CSA C22.2 No.210VW-1.FT1
UL TC
UL 1277
TC
600VDRY90℃ WET75℃
UL 1277
Vertical-Tray Flame Test
UL MTW
UL 1063
MTW
600VDRY90℃ WET60℃
UL 1063
VW-1
TUV.CEマーキングHD21.13
(IEC60227-7)H05VV5-F
(60227 IEC 75)300/500V70℃
HD383 Class 5(IEC60228 Class 5) EN50264-2-1(IEC60332-1)
電気用品安全法電気用品の技術上の基準を定める省令第1項の別表第一ビニルキャブタイヤコード300V60℃
JIS C 3102JIS C 3152
JIS C 3005の4.26.2のb)
対象規格
例
○内数字は黒色絶縁体上の白色ナンバリングを示す。/Figures in ○ indicate white numbering on black insulator.
※Y/G線は緑地に黄色の3本埋込色帯(30~50%)となります。/Y/G indicates green core with yellow stripe(30~50%).
●
●
●
●
●
●
●
●
●
●
●
●
●
●
UL、cUL共用。(カテゴリ QPOR、AVLV2、ZKHZ、AVLV7)
UL VW-1、cUL FT1の難燃対応。
UL垂直トレイ難燃試験に合格。
耐油耐熱柔軟性ビニルシース材を使用。
CEマーキング適合宣言製品(TUV認定品)。
(TUV証明書No.(n×18AWG+1×14AWG)J2051273) n×16(TUV証明書No.(14~12AWG)J2051249)(TUV証明書No.(10AWG)J2051252)
トレイケーブルとしても使用可能。
電気用品安全法に適合しています。
・・・・・・・・
Standard UL, cUL.(Category QPOR, AVLV2, ZKHZ, AVLV7)
Flame resisting : UL VW-1, cUL FT1.
It passes Vertical-Tray Flame Test of UL.
Oil, heat resistant and flexible PVC sheath material is used.
CE marking(TUV recognition product).
(Certificate of TUV No.(n×18AWG+1×14AWG)J2051273) n×16(Certificate of TUV No.(14~12AWG)J2051249)(Certificate of TUV No.(10AWG)J2051252)
It is possible to use it as a tray cable.
It suits Product Safety of Electrical Appliance and Materials.
・・・・・・・・
表面印字
RoHS対応品
※上記UL、CSA規格の耐電圧試験の他に2000V/5分間の試験 を実施しております。
※The examination of 2000V/5 minute besides the withstand voltage test on above mentioned UL standard and the CSA standard is executed.
・・
※12AWG以上は軟銅より線/12AWG or more are stranded annealed coppers.
UE/2501E(N)/TC[Y/G] LF
UE/2501E(N)/TC[Y/G] LF
海外規格ケーブル
海外規格ケーブル
耐 熱 性 ★★★★★耐 油 性 ★★★★★耐ノイズ性 ★難 燃 性 ★★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。
特徴
構造図 Construction figure
UE/2501E-SB(N)/TC[Y/G] LF
導体(軟銅または、すずめっき軟銅より線)※Annealed or tinned annealed copperstranded conductors
構造表 Construction table
識別 Identification
ケーブルトレイ、レースウェイ配線用、電子機器配線用ケーブルFor tray cable, race way and electronic equipment cable
テープTape
耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)
耐熱PVC絶縁体Heat resistant PVC insulation
4E
すずめっき軟銅線編組Tinned annealed copper braid shield
12C+1E
2
14
3
512
611
710
89
Y/G
2
1
3
Y/G
表面印字 Surface Marking(1)6心以下/6 cores or less
(2)7心以上/7 cores or more
E209288(UL)TC 600V 90℃ DRY 75℃ WET サイズ/線心数 or MTW 600V サイズ/線心数 FLEXING VW-1 or AWM 2501 VW-1 E67647 AWM ⅡA/B 105℃ 600V FT1 TAIYO CE VV5 300/500V <PS>E ** LF
E209288(UL)TC 600V 90℃ DRY 75℃ WET サイズ/線心数+サイズ(Y/G)/1C or MTW 600V サイズ/線心数+サイズ(Y/G)/1C FLEXING VW-1 orAWM 2501 VW-1 E67647 AWM ⅡA/B 105℃ 600V FT1 TAIYO CE VV5 300/500V <PS>E ** LF
Features
3E4E
6C+1E10C+1E12C+1E20C+1E30C+1E3E4E
6C+1E3E4E3E4E
10.511.314.416.417.220.925.011.312.115.312.113.013.114.3
145170285370420600850175205335215255265330
12.711.08.36.85.75.14.215.013.09.821.016.227.023.4
※線心数表記“+1E”の場合、14AWGの[Y/G]アース線入りとなります。 (例)6C+1E×18AWG:6×18AWG+1×14AWG(アース) 線心数表記“E”は、同等サイズの[Y/G]アース線入りとなります。 (例)3E×14AWG:2×14AWG+1×14AWG (アース)
※Core number mark “+1E” has the [Y/G] earth cable of 14AWG size.※Core number mark “E” has the [Y/G] earth cable of an equal size.
18(0.89㎟) 35/0.18 1.2 0.85 22.8 60 20002.9
16(1.38㎟) 26/0.26 1.5 0.85 14.3 60 20003.2
1.7
14(2.18㎟) 41/0.26 1.9 0.85 9.01 60 20003.6 1.712
(3.34㎟) 66/0.26 2.4 0.85 5.45 50 20004.1 1.7
1.7
1.82.3
・TC、MTW●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)
301.00
400.91
500.82
600.71
700.58
800.41
90-
100-
●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)
電 線 数 No. of cables電流減少係数 Adjustment factors
2~30.70
40.63
5~60.56
7~150.49
16~400.43
61~0.34
41~600.39
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
・2501301.00
400.93
500.86
600.77
700.68
800.58
900.45
1000.26
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。
・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。
・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.
・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.
販売標準長 Standard sale length
線心数No. of cores サイズ
Size(AWG)
構成Construction(本/mm)
導 体Conductor
耐熱ビニル絶縁体Heat resistant PVC insulation
電気特性Electrical Characteristics
外径Outside diameter(mm)
厚さThickness(mm)
導体抵抗Conductor resistance(Ω/km20℃)
絶縁抵抗Insulation resistance(MΩkm20℃)
耐電圧Electrical strength(V/1min.)
外径Outside diameter(mm)
概算質量Approx.weight(kg/km)
耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath
厚さThickness(mm)
外径Overall diameter 約approx(mm)
許容電流Allowable ampacity(A)
RoHS
認 証 Certification
適合規格 Applicable standard
形式記号 Official symbol
定格電圧 Voltage rating定格温度 Temperature rating
導 体 Conductor
難 燃 性 Flame rating
UL AWM.cUL AWMUL 758
CSA C22.2 No.210UL STYLE 2501CSA AWM ⅡA/B600V105℃UL 758
CSA C22.2 No.210VW-1.FT1
UL TC
UL 1277
TC
600VDRY90℃ WET75℃
UL 1277
Vertical-Tray Flame Test
UL MTW
UL 1063
MTW
600VDRY90℃ WET60℃
UL 1063
VW-1
CEマーキングHD21.13
(IEC60227-7)H05VV5-F
(60227 IEC 75)300/500V70℃
HD383 Class 5(IEC60228 Class 5) EN50264-2-1(IEC60332-1)
電気用品安全法電気用品の技術上の基準を定める省令第1項の別表第一ビニルキャブタイヤコード300V60℃
JIS C 3102JIS C 3152
JIS C 3005の4.26.2のb)
対象規格
●
●
●
●
●
●
●
●
●
●
●
●
●
●
UL、cUL共用。(カテゴリ QPOR、AVLV2、ZKHZ、AVLV7)
UL VW-1、cUL FT1の難燃対応。
UL垂直トレイ難燃試験に合格。
耐油耐熱柔軟性ビニルシース材を使用。
CEマーキング適合宣言製品。
トレイケーブルとしても使用可能。
電気用品安全法に適合しています。
Standard UL, cUL.(Category QPOR, AVLV2, ZKHZ, AVLV7)
Flame resisting : UL VW-1, cUL FT1.
It passes Vertical-Tray Flame Test of UL.
Oil, heat resistant and flexible PVC sheath material is used.
CE marking.
It is possible to use it as a tray cable.
It suits Product Safety of Electrical Appliance and Materials.
例
○内数字は黒色絶縁体上の白色ナンバリングを示す。/Figures in ○ indicate white numbering on black insulator.
※Y/G線は緑地に黄色の3本埋込色帯(30~50%)となります。/Y/G indicates green core with yellow stripe(30~50%).
100m(切断販売が可能なサイズもございます。詳細は窓口にお問い合わせ下さい。)
100m(There are sizes that can be the cutting sales, too. Please inquire of sales staff in detail.)
許容電流
表面印字
RoHS対応品
※上記UL、CSA規格の耐電圧試験の他に2000V/5分間の試験 を実施しております。
※The examination of 2000V/5 minute besides the withstand voltage test on above mentioned UL standard and the CSA standard is executed.
※12AWG以上は軟銅より線/12AWG or more are stranded annealed coppers.
UE/2501E-SB(N)/TC[Y/G] LF
UE/2501E-SB(N)/TC[Y/G] LF
海外規格ケーブル
海外規格ケーブル
耐 熱 性 ★★★★★耐 油 性 ★★★★★耐ノイズ性 ★★★難 燃 性 ★★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。
特徴
構造図 Construction figure
UE/2501E(N)/TC[Y/G]LG LF
識別 Identification
ケーブルトレイ、レースウェイ配線用、電子機器配線用ケーブルFor tray cable, race way and electronic equipment cable
12C+1E
2
14
3
512
611
710
89
Y/G7E(6C+1E)
1
2
3
6
5
4
Y/G
表面印字 Surface Marking
E209288(UL)TC 600V 90℃ DRY 75℃ WET サイズ/線心数+サイズ(Y/G)/1C or MTW 600V サイズ/線心数+サイズ(Y/G)/1C FLEXING VW-1 orAWM 2501 VW-1 E67647 AWM ⅡA/B 105℃ 600V FT1 TAIYO CE VV5 300/500V <PS>E ** LF
Features
6C+1E10C+1E12C+1E16C+1E20C+1E24C+1E30C+1E40C+1E6C+1E10C+1E12C+1E20C+1E30C+1E40C+1E7E11E13E17E21E25E7E4E7E
13.615.616.417.219.922.624.226.914.516.917.922.826.229.415.618.619.622.925.127.117.215.219.5
23030535042050563075093527538043569094512203404905557609201070455385640
8.36.85.75.75.15.14.23.79.88.06.86.05.04.413.711.29.58.48.47.017.631.824.0
※線心数表記“+1E”の場合、14AWGの[Y/G]アース線入りとなります。 (例)6C+1E×18AWG:6×18AWG+1×14AWG(アース) 線心数表記“E”は、同等サイズの[Y/G]アース線入りとなります。 (例)3E×14AWG:2×14AWG+1×14AWG (アース)
※Core number mark “+1E” has the [Y/G] earth cable of 14AWG size.※Core number mark “E” has the [Y/G] earth cable of an equal size.
18(0.89㎟) 35/0.18 1.2 0.85 22.8 60 20002.9
1.7
16(1.38㎟) 26/0.26 1.5 0.85 14.3 60 2000
9.01 60 2000
3.2
14(2.18㎟) 41/0.26 1.9 0.85 3.6
1.7
2.3
2.32.4
12(3.34㎟) 66/0.26 2.4 0.85 5.45 50 20004.110
(5.52㎟)104/0.26 3.1 0.85 3.44 50 20004.8
1.7
2.3
1.71.7
構造表 Construction table
・TC、MTW
許容電流
●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)
301.00
400.91
500.82
600.71
700.58
800.41
90-
100-
●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)
電 線 数 No. of cables電流減少係数 Adjustment factors
2~30.70
40.63
5~60.56
7~150.49
16~400.43
61~0.34
41~600.39
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
・2501301.00
400.93
500.86
600.77
700.68
800.58
900.45
1000.26
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。
・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。
・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.
・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.
販売標準長 Standard sale length100m(切断販売が可能なサイズもございます。詳細は窓口にお問い合わせ下さい。)
100m(There are sizes that can be the cutting sales, too. Please inquire of sales staff in detail.)
線心数No. of cores サイズ
Size(AWG)
構成Construction(本/mm)
導 体Conductor
耐熱ビニル絶縁体Heat resistant PVC insulation
電気特性Electrical Characteristics
外径Outside diameter(mm)
厚さThickness(mm)
導体抵抗Conductor resistance(Ω/km20℃)
絶縁抵抗Insulation resistance(MΩkm20℃)
耐電圧Electrical strength(V/1min.)
外径Outside diameter(mm)
概算質量Approx.weight(kg/km)
耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath
厚さThickness(mm)
外径Overall diameter 約approx(mm)
許容電流Allowable ampacity(A)
耐熱PVC絶縁体Heat resistant PVC insulation
導体(軟銅または、すずめっき軟銅より線)※Annealed or tinned annealed copperstranded conductors
テープTape
耐油耐熱柔軟性PVCシース(ライトグレー)Oil, heat resistant and flexible PVC sheath(Light Gray)
RoHS
認 証 Certification
適合規格 Applicable standard
形式記号 Official symbol
定格電圧 Voltage rating定格温度 Temperature rating
導 体 Conductor
難 燃 性 Flame rating
UL AWM.cUL AWMUL 758
CSA C22.2 No.210UL STYLE 2501CSA AWM ⅡA/B600V105℃UL 758
CSA C22.2 No.210VW-1.FT1
UL TC
UL 1277
TC
600VDRY90℃ WET75℃
UL 1277
Vertical-Tray Flame Test
UL MTW
UL 1063
MTW
600VDRY90℃ WET60℃
UL 1063
VW-1
TUV.CEマーキングHD21.13
(IEC60227-7)H05VV5-F
(60227 IEC 75)300/500V70℃
HD383 Class 5(IEC60228 Class 5) EN50264-2-1(IEC60332-1)
電気用品安全法電気用品の技術上の基準を定める省令第1項の別表第一ビニルキャブタイヤコード300V60℃
JIS C 3102JIS C 3152
JIS C 3005の4.26.2のb)
対象規格
例
○内数字は青色絶縁体上の白色ナンバリングを示す。/Figures in ○ indicate white numbering on blue insulator.
※Y/G線は緑地に黄色の3本埋込色帯(30~50%)となります。/Y/G indicates green core with yellow stripe(30~50%).
●
●
●
●
●
●
●
●
●
●
●
●
●
●
UL、cUL共用。(カテゴリ QPOR、AVLV2、ZKHZ、AVLV7)
UL VW-1、cUL FT1の難燃対応。
UL垂直トレイ難燃試験に合格。
耐油耐熱柔軟性ビニルシース材を使用。
CEマーキング適合宣言製品(TUV認定品)。
(TUV証明書No.(n×18AWG+1×14AWG)J2051273) n×16(TUV証明書No.(14~12AWG)J2051249)(TUV証明書No.(10AWG)J2051252)
トレイケーブルとしても使用可能。
電気用品安全法に適合しています。
・・
Standard UL, cUL.(Category QPOR, AVLV2, ZKHZ, AVLV7)
Flame resisting : UL VW-1, cUL FT1.
It passes Vertical-Tray Flame Test of UL.
Oil, heat resistant and flexible PVC sheath material is used.
CE marking(TUV recognition product).
(Certificate of TUV No.(n×18AWG+1×14AWG)J2051273) n×16(Certificate of TUV No.(14~12AWG)J2051249)(Certificate of TUV No.(10AWG)J2051252)
It is possible to use it as a tray cable.
It suits Product Safety of Electrical Appliance and Materials.
表面印字
RoHS対応品
※上記UL、CSA規格の耐電圧試験の他に2000V/5分間の試験 を実施しております。
※The examination of 2000V/5 minute besides the withstand voltage test on above mentioned UL standard and the CSA standard is executed.
・・・・・・
・・・・・・・・
・・
※12AWG以上は軟銅より線/12AWG or more are stranded annealed coppers.
UE/2501E(N)/TC[Y/G]LG LF
UE/2501E(N)/TC[Y/G]LG LF
海外規格ケーブル
海外規格ケーブル
耐 熱 性 ★★★★★耐 油 性 ★★★★★耐ノイズ性 ★難 燃 性 ★★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。
線心数No. of cores サイズ
Size(AWG)
構成Construction(本/mm)
導 体Conductor
耐熱ビニル絶縁体Heat resistant PVC insulation
電気特性Electrical Characteristics
外径Outside diameter(mm)
厚さThickness(mm)
導体抵抗Conductor resistance(Ω/km20℃)
絶縁抵抗Insulation resistance(MΩkm20℃)
耐電圧Electrical strength(V/1min.)
外径Outside diameter(mm)
概算質量Approx.weight(kg/km)
耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath
厚さThickness(mm)
外径Overall diameter 約approx(mm)
許容電流Allowable ampacity(A)
特徴
構造図 Construction figure
識別 Identification
UE/2587-SB(N)[Y/G] LF
構造表 Construction table
電子機器配線用ケーブル Electronic equipment cable
インナーシースInner sheath
●
●
●
●
●
●
●
●
●
●
UL、cUL共用。(カテゴリ AVLV2、AVLV7)
UL VW-1、cUL FT1の難燃対応。
耐油耐熱柔軟性ビニルシース材を使用。
CEマーキング適合宣言製品(TUV認定品)。(TUV証明書No.J2150116)
インナーシース型シールド付ケーブル。
・・・・
※線心数表記“E”は、同等サイズの[Y/G]アース線入りとなります。 (例)6E×18AWG:5×18AWG+1×18AWG (アース)
※Core number mark “E” has the [Y/G] earth cable of an equal size.
表面印字 Surface Marking
E67647 AWM 2587 90℃ 600V VW-1 TAIYO AWM ⅡA/B 90℃ 600V FT1 TAIYO CE VV5 300/500V LF
導体(すずめっき軟銅より線)Tinned annealed copperstranded conductors
テープTape
耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)
耐熱PVC絶縁体Heat resistant PVC insulation
すずめっき軟銅線編組Tinned annealed copper braid shield
11E
1
2
5
43
Y/G
6E
6E8E11E13E16E21E31E41E6E11E13E21E31E41E6E11E13E21E
1.21.31.41.51.51.71.92.11.31.51.61.82.12.31.41.71.82.1
11.913.915.416.216.919.723.125.513.416.917.922.325.528.415.420.021.125.8
20027033037041554575594026541547073097512403656006801020
88766554119876515121110
2
1
3
Y/G
76
5
410
9
8
18(0.89㎟) 35/0.18 1.2 0.6 22.8 10 20002.4
16(1.38㎟) 26/0.26 1.5 0.6 14.3 10 20002.7
14(2.18㎟) 41/0.26 1.9 0.7 9.01 10 20003.3
許容電流
●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)
301.00
400.91
500.82
600.71
700.58
800.41
90-
100-
●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)
電 線 数 No. of cables電流減少係数 Adjustment factors
2~30.70
40.63
5~60.56
7~150.49
16~400.43
61~0.34
41~600.39
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。
・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。
・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.
・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.
販売標準長 Standard sale length
例
○内数字は黒色絶縁体上の白色ナンバリングを示す。/Figures in ○ indicate white numbering on black insulator.
※Y/G線は緑地に黄色の3本埋込色帯(30~50%)となります。/Y/G indicates green core with yellow stripe(30~50%).
Standard UL, cUL.(Category AVLV2, AVLV7)
Flame resisting : UL VW-1, cUL FT1.
Oil, heat resistant and flexible PVC sheath material is used.
CE marking(TUV recognition product).(Certificate of TUV No.J2150116)
It is an inner sheath type and a cable with the shield.
・・・・
100m(切断販売が可能なサイズもございます。詳細は窓口にお問い合わせ下さい。)
100m(There are sizes that can be the cutting sales, too. Please inquire of sales staff in detail.)
表面印字
RoHS対応品
※上記UL、CSA規格の耐電圧試験の他に2000V/5分間の試験 を実施しております。
※The examination of 2000V/5 minute besides the withstand voltage test on above mentioned UL standard and the CSA standard is executed.
対象規格
RoHS
認 証 Certification
適合規格 Applicable standard
形式記号 Official symbol
定格電圧 Voltage rating定格温度 Temperature rating
導 体 Conductor
難 燃 性 Flame rating
UL AWM
UL 758
UL STYLE 2587
600V90℃
UL 758
VW-1
cUL AWM
CSA C22.2 No.210
CSA AWM ⅡA/B
600V90℃
CSA C22.2 No.210
FT1
TUV.CEマーキングHD21.13
(IEC60227-7)H05VVC4V5-K(60227 IEC 74)300/500V70℃
HD383 Class 5(IEC60228 Class 5) EN50264-2-1(IEC332-1)
Features
・・UE/2587-SB(N)[Y/G] LF
UE/2587-SB(N)[Y/G] LF
海外規格ケーブル
海外規格ケーブル
耐 熱 性 ★★★★耐 油 性 ★★★★★耐ノイズ性 ★★★難 燃 性 ★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。
特徴
UE/THHW LF
構造表 Construction table
●
●
●
●
●
●
●
●
●
●
●
●
UL、cUL共用。(カテゴリ ZKHZ、ZLGR、ZLGR7)
UL VW-1又は垂直トレイ難燃試験に合格。
耐熱性ビニル材料を使用。
CEマーキング適合宣言製品(TUV認定品)。(TUV証明書No.J50005945)
NEC規格のType Letterです。
ケーブルトレイ、レースウェイに使用可能。
(回路導体=1/0AWG以上、グランド導体=4AWG以上)
・・
Standard UL, cUL.(Category ZKHZ, ZLGR, ZLGR7)
It passes UL VW-1 or Vertical-Tray Flame Test of UL.
Heat resistant PVC material is used.
CE marking(TUV recognition product).(Certificate of TUV No.J50005945)
It is type letter of the NEC standard.
It is possible to use it for the cable tray and the race way,
(circuit conductor=1/0AWG or more, grand conductor=4AWG or more).
一般配線用電線 Electric wire for general wiring
線心数No. of cores サイズ
Size(AWG)
1C1C1C1C1C1C1C1C1C1C1C1C1C1C1C
14(2.14㎟)12(3.34㎟)10(5.27㎟)8(8.44㎟)6(13.5㎟)4(21.4㎟)2(33.8㎟)1(45.8㎟)1/0(54.4㎟)2/0(69.5㎟)3/0(90.7㎟)4/0(117.9㎟)300MCM(154.1㎟)400MCM(206.0㎟)500MCM(258.9㎟)
構成Construction(本/mm)
導 体Conductor
耐熱ビニル絶縁体Heat resistant PVC insulation
電気特性Electrical Characteristics
84/0.1866/0.254104/0.2547/15/0.327/24/0.327/38/0.327/60/0.3219/30/0.3219/18/0.4519/23/0.4519/30/0.4519/39/0.4519/51/0.4537/35/0.4537/44/0.45
外径Outside diameter(mm)1.92.43.14.25.36.68.39.810.712.113.815.718.020.723.2
厚さThickness(mm)0.850.850.851.251.71.71.72.32.32.32.32.32.72.72.7
導体抵抗Conductor resistance
(Ω/km20℃)8.615.423.412.141.350.8480.5340.4230.3350.2660.2110.1670.1180.0890.071
絶縁抵抗Insulation resistance(MΩkm20℃)
1751501251301351159510595858070706555
耐電圧Electrical strength(V/1min.)200020002000200020002000200025002500250025002500300030003000
外径Overall diameter(mm)
概算質量Approx.weight(kg/km)
3.64.14.86.78.710.011.714.415.316.718.420.323.426.328.8
29436511018026539555064080010201300170021902710
許容電流Allowable ampacity(A)
35405580105140190220260300350405505615700
識別 Identification・14AWG~3/0AWGまで黒、Y/G
・4/0AWG~500MCMまで黒
※Y/G線は緑地に黄色の3本埋込色帯(30~50%)となります。/Y/G indicates green core with yellow stripe(30~50%).
・14AWG~3/0AWG cable is a black and Y/G.
・4/0AWG~500MCM cable is a black.
※UE/THHWは、セパレータを施す場合があります。 ※UE/THHW might give the separator.
表面印字 Surface Marking
(1)14AWG~10AWG(回路導体)、14AWG~10AWG(Y/G線) /14AWG~10AWG(circuit conductor)、14AWG~10AWG(Y/G)
(2)8AWG~1AWG(回路導体)、8AWG~6AWG(Y/G線) /8AWG~1AWG(circuit conductor)、8AWG~6AWG(Y/G)
E242557(UL) MTW FLEXING or THHW 600V □□AWG VW-1 c(UL) TW75 600V □□AWG(○○mm2) FT1 TAIYO CE 450/750V LF
E242557(UL) MTW or THHW 600V □□AWG VW-1 c(UL) TW75 600V □□AWG(○○mm2) FT1 TAIYO CE 450/750V LF
(3)1/0AWG以上(回路導体)、4AWG以上(Y/G線) /1/0AWG or more(circuit conductor)、4AWG or more(Y/G)
E242557(UL) MTW or THHW 600V □□AWG CT c(UL) TW75 600V □□AWG(○○mm2) FT1 TAIYO CE 450/750V LF
Features
許容電流
●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)
301.00
400.91
500.82
600.71
700.58
800.41
90-
100-
●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)
電 線 数 No. of wires電流減少係数 Adjustment factors
2~30.70
40.63
5~60.56
7~150.49
16~400.43
61~0.34
41~600.39
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。
・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。
・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.
・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.
販売標準長 Standard sale length100m8AWG~500MCMまでは切断販売可能。詳細は窓口にお問い合わせ下さい。
100m8AWG~500MCM cables can be cut. Please inquire of sales staff in detail.
構造図 Construction figure
導体(軟銅より線)Stranded annealed coppers
耐熱PVC絶縁体Heat resistant PVC insulation
・・・・
表面印字
RoHS対応品
※上記UL、CSA規格の耐電圧試験の他に2500V/5分間の試験 を実施しております。
※The examination of 2500V/5 minute besides the withstand voltage test on above mentioned UL standard and the CSA standard is executed.
・・
対象規格認 証 Certification
適合規格 Applicable standard
形式記号 Official symbol
定格電圧 Voltage rating定格温度 Temperature rating
導 体 Conductor
難 燃 性 Flame rating
UL THHW
UL 83
THHW
600VDRY90℃ WET75℃
UL 83
VW-1Vertical-Tray Flame Test
UL MTW
UL 1063
MTW
600VDRY90℃ WET60℃
UL 1063
VW-1
cUL TW75
CSA C22.2 No.75
TW75
600VDRY75℃ WET75℃
CSA C22.2 No.75
FT1
TUV.CEマーキングHD21.13
(IEC60227-7)H07V-K
(60227 IEC 02)450/750V70℃
HD383 Class 5(IEC60228 Class 5)
EN50264-2-1(IEC60332-1) RoHS
・・UE/THHW LF
UE/THHW LF
海外規格ケーブル
海外規格ケーブル
耐 熱 性 ★★★★耐 油 性 ★★★耐ノイズ性 ★難 燃 性 ★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。
線心数No. of cores サイズ
Size(AWG)
構成Construction(本/mm)
導 体Conductor
耐熱ビニル絶縁体Heat resistant PVC insulation
電気特性Electrical Characteristics
外径Outside diameter(mm)
厚さThickness(mm)
導体抵抗Conductor resistance(Ω/km20℃)
絶縁抵抗Insulation resistance(MΩkm20℃)
耐電圧Electrical strength(V/1min.)
外径Outside diameter(mm)
概算質量Approx.weight(kg/km)
耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath
厚さThickness(mm)
外径Overall diameter 約approx(mm)
許容電流Allowable ampacity(A)
特徴
構造図 Construction figure
TC-ER LF
構造表 Construction table●
●
●
●
●
●
●
●
●
●
●
●
●
●
UL規格。(カテゴリ QPOR)
TC-ER認証に適合しております。※2心は対象外となりERに適用できません。
UL垂直トレイ難燃試験に合格。
耐油耐熱柔軟性ビニル材料を使用。
WET LOCATIONにも使用可能。
NEC規格のType Letterです。
ケーブルトレイ、レースウェイに使用可能。
UL standard.(Category QPOR)
Suits the TC-ER attestation.※2core product is excluded.(not “-ER”)
It passes Vertical-Tray Flame Test of UL.
Oil, heat resistant and flexible PVC material is used.
It is possible to use it also for WET LOCATION,
It is type letter of the NEC standard.
It is possible to use it for the cable tray and the race way,
ケーブルトレイ、レースウェイ配線用ケーブルFor tray cable and race way electronic equipment cable
※線心数表記“E”は、同等サイズの[Y/G]アース線入りとなります。 (例)3E×18AWG:2×18AWG+1×18AWG (アース)
※Core number mark “E” has the [Y/G] earth cable of an equal size.
表面印字 Surface Marking
識別 Identification
Y/G
3 2
1
4E
Y/G 2
1
3E
2
1
2C
2C3E4E2C3E4E2C3E4E2C3E4E2C3E4E3E4E3E4E3E4E3E4E
18(0.89㎟)
16(1.34㎟)
14(2.14㎟)
12(3.34㎟)
10(5.27㎟)
8(8.44㎟)
6(13.5㎟)
4(21.4㎟)
2(33.8㎟)
7/15/0.32
7/24/0.32
7/38/0.32
7/60/0.32
4.2
5.3
6.6
8.3
1.25
1.7
1.7
1.7
6.7
8.7
10.0
11.7
1.7
2.3
2.3
2.3
2.26
1.37
0.872
0.559
50
50
50
40
2000
2000
2000
2000
35/0.18
53/0.18
84/0.18
66/0.254
104/0.254
1.2
1.5
1.9
2.4
3.1
0.85
0.85
0.85
0.85
0.85
22.6
14.6
9.13
5.70
3.65
60
60
60
50
50
2000
2000
2000
2000
2000
2.9
3.2
3.6
4.1
4.8
1.25
1.25
1.25
1.25
1.7
8.58.99.79.19.610.49.910.511.410.911.512.612.313.015.218.019.823.525.826.428.930.033.0
80951159511514012015018515520025521528538549062082010401130143015902040
181815232320313126404035535347736410188133115176152
1.25
認 証 Certification適合規格 Applicable standard形式記号 Official symbol定格電圧 Voltage rating定格温度 Temperature rating導 体 Conductor難 燃 性 Flame rating
UL TCUL 1277TC600V
DRY90℃ WET75℃UL 1277
Vertical-Tray Flame Test
耐熱PVC絶縁体Heat resistant PVC insulation
テープTape
耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)
導体(軟銅より線)Stranded annealed coppers
Features
許容電流
●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)
301.00
400.91
500.82
600.71
700.58
800.41
90-
100-
●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)
電 線 数 No. of cables電流減少係数 Adjustment factors
2~30.70
40.63
5~60.56
7~150.49
16~400.43
61~0.34
41~600.39
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。
・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。
・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.
・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.
販売標準長 Standard sale length100m(切断販売が可能なサイズもございます。詳細は窓口にお問い合わせ下さい。)
100m(There are sizes that can be the cutting sales, too. Please inquire of sales staff in detail.)
例
○内数字は黒色絶縁体上の白色ナンバリングを示す。/Figures in ○ indicate white numbering on black insulator.
※Y/G線は緑地に黄色の3本埋込色帯(30~50%)となります。/Y/G indicates green core with yellow stripe(30~50%).
表面印字
RoHS対応品
(1)2心/2 cores
(2)3心以上/3 cores
E209288-*(UL)TC 600V 90℃ DRY 75℃ WET 2×□□AWG TAIYO LF
E209288-*(UL)TC-ER 600V 90℃ DRY 75℃ WET 線心数×□□AWG TAIYO LF
対象規格
RoHS
TC- ER LF
TC- ER LF
海外規格ケーブル
海外規格ケーブル
耐 熱 性 ★★★★耐 油 性 ★★★★★耐ノイズ性 ★難 燃 性 ★★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。
特徴
構造図 Construction figure
STO(A)/TC LF
構造表
識別 Identification
ケーブルトレイ、レースウェイ配線用、電気機器電源用コードFor tray cable, race way and electronic equipment power supply code
●
●
●
●
●
●
●
●
●
●
●
●
UL、cUL共用。(カテゴリ QPOR、ZJCZ、ZKHZ、ZJCZ7)
UL VW-1、cUL FT1の難燃対応。
UL垂直トレイ難燃試験に合格。
耐油耐熱柔軟性ビニル材料を使用。
トレイケーブルとしても使用可能。
電気用品安全法に適合しています。
Standard UL, cUL.(Category QPOR, ZJCZ, ZKHZ, ZJCZ7)
Flame resisting : UL VW-1, cUL FT1.
It passes Vertical-Tray Flame Test of UL.
Oil, heat resistant and flexible PVC material is used.
It is possible to use it as a tray cable.
It suits Product Safety of Electrical Appliance and Materials.
電気特性
・TC、MTW
・STO
※線心数表記“E”は、同等サイズの[Y/G]アース線入りとなります。 (例)3E×18AWG:2×18AWG+1×18AWG (アース)
※Core number mark “E” has the [Y/G] earth cable of an equal size.
E209288(UL)TC 600V 90℃ DRY 75℃ WET or MTW FLEXING VW-1 or STO 105℃ 600V VW-1 線心数×□□AWGc(UL) STO 105℃ 600V 線心数×□□AWG(○○mm2) FT1 TAIYO <PS>E ** LF
表面印字 Surface Marking(1)18AWG~10AWGの場合/18AWG~10AWG cables
(2)8AWG~2AWGの場合/8AWG~2AWG cables
E209288(UL)TC 600V 90℃ DRY 75℃ WET or MTW VW-1 or STO 105℃ 600V VW-1 線心数×□□AWG c(UL) STO 105℃ 600V 線心数×□□AWG(○○mm2) FT1 TAIYO <PS>E ** LF
Y/G
赤 白
黒
4E
Y/G 白
黒
3E
白
黒
2C
線心数No. of cores サイズ
Size(AWG)
2C3E4E2C3E4E2C3E4E2C3E4E2C3E4E3E4E2C3E4E3E4E3E4E
18(0.89㎟)
16(1.34㎟)
14(2.14㎟)
12(3.34㎟)
10(5.27㎟)
構成Construction(本/mm)
導 体Conductor
耐熱ビニル絶縁体Heat resistant PVC insulation
35/0.18
53/0.18
84/0.18
66/0.254
104/0.254
外径Outside diameter(mm)
1.2
1.5
1.9
2.4
3.1
厚さThickness(mm)
0.85
0.85
1.25
1.25
1.25
外径Outside diameter(mm)
概算質量Approx.weight(kg/km)
2.9
3.2
4.4
4.9
5.6
耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath厚さ
Thickness(mm)
1.7
1.7
2.25
2.65
2.65
3.13.5
3.93.94.34.34.7
外径Overall diameter 約approx(mm)
9.39.710.59.910.511.313.514.215.315.316.117.316.717.619.022.825.524.625.929.029.632.934.438.3
9511513511513516520524529527533040034542552569189576595512301330171019102460
サイズSize
(AWG)18161412108642
22.614.08.855.553.502.261.370.8720.559
606060505050505040
200020003000300030004000400040004000
71015202535456080
101318253040557095
導体抵抗Conductor resistance(Ω/km20℃)
絶縁抵抗Insulation resistance(MΩkm20℃)
耐電圧Electrical strength(V/1min.) a
※許容電流(A)Allowable ampacity
b a:3心及びその他の多心コードで3心のみに電流が流れるコードに適用b:2心及びその他の多心コードで2心のみに電流が流れるコードに適用
※許容電流については、米国電気工事規定(NEC)により
a:Apply to 3-conductor cords and other multiconductor cords connected to utilization equipment so that only 3 conductors are current-carrying.b:Apply to 2-conductor cords and other multiconductor cords connected to utilization equipment so that only 2 conductors are current-carrying.
※Allowable ampacity By National Electrical Code(NEC)
8(8.44㎟) 7/15/0.32 4.2 1.7 7.6
6(13.5㎟) 7/24/0.32 5.3 1.7 8.7
4(21.4㎟) 7/38/0.32 6.6 1.7 10.0
2(33.8㎟) 7/60/0.32 8.3 1.8 11.9
3.5
Features
耐熱PVC絶縁体Heat resistant PVC insulation テープ
Tape
耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)
導体(軟銅より線)Stranded annealed coppers
許容電流
●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)
301.00
400.91
500.82
600.71
700.58
800.41
90-
100-
●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)
電 線 数 No. of cables電流減少係数 Adjustment factors
2~30.70
40.63
5~60.56
7~150.49
16~400.43
61~0.34
41~600.39
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
301.00
400.93
500.86
600.77
700.68
800.58
900.45
1000.26
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
Allowable ampacity
Electrical property
・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。
・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。
・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.
・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.
販売標準長 Standard sale length100m(10~2AWGは、切断販売可能。詳細は窓口にお問い合わせ下さい。)
100m(10~2AWG cables can be cut. Please inquire of sales staff in detail.)
※Y/G線は緑地に黄色の3本埋込色帯(30~50%)となります。/Y/G indicates green core with yellow stripe(30~50%).
認 証 Certification
適合規格 Applicable standard
形式記号 Official symbol
定格電圧 Voltage rating定格温度 Temperature rating
導 体 Conductor
難 燃 性 Flame rating
UL STO
UL 62
STO
600V105℃
UL 62
VW-1
cUL STO
CSA C22.2 No.49
STO
600V105℃
CSA C22.2 No.49
FT1
UL TC
UL 1277
TC
600VDRY90℃ WET75℃
UL 1277
Vertical-Tray Flame Test
UL MTW
UL 1063
MTW
600VDRY90℃ WET60℃
UL 1063
VW-1
電気用品安全法(18~10AWG)電気用品の技術上の基準を定める省令第1項の別表第一ビニルキャブタイヤコード300V60℃
JIS C 3102
JIS C 3005の4.26.2のb)
電気用品安全法(8~2AWG)電気用品の技術上の基準を定める省令第1項の別表第一ビニルキャブタイヤケーブル600V60℃
JIS C 3102
JIS C 3005の4.26.2のb)
表面印字
RoHS対応品
対象規格
RoHS
STO(A)/TC LF
STO(A)/TC LF
海外規格ケーブル
海外規格ケーブル
耐 熱 性 ★★★★★耐 油 性 ★★★★★耐ノイズ性 ★難 燃 性 ★★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★★※特性は目安となります。
線心数No. of cores サイズ
Size(AWG)
構成Construction(本/mm)
導 体Conductor
耐熱ビニル絶縁体Heat resistant PVC insulation
外径Outside diameter(mm)
厚さThickness(mm)
外径Outside diameter(mm)
概算質量Approx.weight(kg/km)
耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath厚さ
Thickness(mm)
外径Overall diameter 約approx(mm)
特徴
構造図 Construction figure
構造表 Construction table●
●
●
●
●
●
●
●
●
●
●
●
UL、cUL共用。(カテゴリ QPOR、ZJCZ、ZKHZ、ZJCZ7)
UL VW-1、cUL FT1の難燃対応。
UL垂直トレイ難燃試験に合格。
耐油耐熱柔軟性ビニル材料を使用。
トレイケーブルとしても使用可能。
電気用品安全法に適合しています。
Standard UL, cUL.(Category QPOR, ZJCZ, ZKHZ, ZJCZ7)
Flame resisting : UL VW-1, cUL FT1.
It passes Vertical-Tray Flame Test of UL.
Oil, heat resistant and flexible PVC material is used.
It is possible to use it as a tray cable.
It suits Product Safety of Electrical Appliance and Materials.
※線心数表記“E”は、同等サイズの[Y/G]アース線入りとなります。 (例)3E×18AWG:2×18AWG+1×18AWG (アース)
※Core number mark “E” has the [Y/G] earth cable of an equal size.
STO-SB(A)/TC LF
Features
ケーブルトレイ、レースウェイ配線用、電気機器電源用コードFor tray cable, race way and electronic equipment power supply code
E209288(UL)TC 90℃ DRY 75℃ WET or MTW FLEXING VW-1 or STO SHIELDED 105℃ 600V VW-1 線心数×□□AWGc(UL) STO SHIELDED 105℃ 600V 線心数×□□AWG(○○mm2) FT1 TAIYO <PS>E ** LF
表面印字 Surface Marking
2C3E4E2C3E4E2C3E4E2C3E4E2C3E4E
18(0.89㎟)
16(1.34㎟)
14(2.14㎟)
12(3.34㎟)
10(5.27㎟)
35/0.18
53/0.18
84/0.18
66/0.254
104/0.254
1.2
1.5
1.9
2.4
3.1
0.85
0.85
1.25
1.25
1.25
2.9
3.2
4.4
4.9
5.6
1.7
1.7
2.25
2.65
2.65
10.010.411.210.611.212.014.214.916.116.116.918.117.518.419.8
130145170145175205250290355335395470410495600
耐熱PVC絶縁体Heat resistant PVC insulation テープ
Tape
耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)
導体(軟銅より線)Stranded annealed coppers
すずめっき軟銅線編組Tinned annealed copper braid shield
電気特性
・TC、MTW
・STO
サイズSize
(AWG)
導体抵抗Conductor resistance(Ω/km20℃)
絶縁抵抗Insulation resistance(MΩkm20℃)
耐電圧Electrical strength(V/1min.) a
※許容電流(A)Allowable ampacity
b
許容電流
●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)
301.00
400.91
500.82
600.71
700.58
800.41
90-
100-
●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)
電 線 数 No. of cables電流減少係数 Adjustment factors
2~30.70
40.63
5~60.56
7~150.49
16~400.43
61~0.34
41~600.39
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
301.00
400.93
500.86
600.77
700.68
800.58
900.45
1000.26
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
Allowable ampacity
Electrical property
・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。
・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。
・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.
・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.
1816141210
22.614.08.855.553.50
6060605050
20002000300030003000
710152025
1013182530
販売標準長 Standard sale length100m 100m
a:3心及びその他の多心コードで3心のみに電流が流れるコードに適用b:2心及びその他の多心コードで2心のみに電流が流れるコードに適用
※許容電流については、米国電気工事規定(NEC)により
a:Apply to 3-conductor cords and other multiconductor cords connected to utilization equipment so that only 3 conductors are current-carrying.b:Apply to 2-conductor cords and other multiconductor cords connected to utilization equipment so that only 2 conductors are current-carrying.
※Allowable ampacity By National Electrical Code(NEC)
識別 Identification
Y/G
赤 白
黒
4E
Y/G 白
黒
3E
白
黒
2C
※Y/G線は緑地に黄色の3本埋込色帯(30~50%)となります。/Y/G indicates green core with yellow stripe(30~50%).
認 証 Certification
適合規格 Applicable standard
形式記号 Official symbol
定格電圧 Voltage rating定格温度 Temperature rating
導 体 Conductor
難 燃 性 Flame rating
UL STO
UL 62
STO
600V105℃
UL 62
VW-1
cUL STO
CSA C22.2 No.49
STO
600V105℃
CSA C22.2 No.49
FT1
UL TC
UL 1277
TC
600VDRY90℃ WET75℃
UL 1277
Vertical-Tray Flame Test
UL MTW
UL 1063
MTW
600VDRY90℃ WET60℃
UL 1063
VW-1
電気用品安全法電気用品の技術上の基準を定める省令第1項の別表第一ビニルキャブタイヤコード300V60℃
JIS C 3102
JIS C 3005の4.26.2のb)
表面印字
RoHS対応品
対象規格
RoHS
STO-SB(A)/TC LF
STO-SB(A)/TC LF
海外規格ケーブル
海外規格ケーブル
耐 熱 性 ★★★★★耐 油 性 ★★★★★耐ノイズ性 ★★★難 燃 性 ★★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★★※特性は目安となります。
線心数No. of cores サイズ
Size(AWG)
構成Construction(本/mm)
導 体Conductor
耐熱ビニル絶縁体Heat resistant PVC insulation
外径Outside diameter(mm)
厚さThickness(mm)
外径Outside diameter(mm)
概算質量Approx.weight(kg/km)
耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath厚さ
Thickness(mm)
外径Overall diameter 約approx(mm)
特徴
構造図 Construction figure
構造表 Construction table
識別 Identification
ケーブルトレイ、レースウェイ配線用、電気機器電源用コードFor tray cable, race way and electronic equipment power supply code
テープtape
耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)
●
●
●
●
●
●
●
●
●
●
●
●
●
●
UL、cUL共用。(カテゴリ ZJCZ、ZKHZ、QPOR、ZJCZ7)
UL VW-1、cUL FT1の難燃対応。
UL垂直トレイ難燃試験に合格。
耐油耐熱柔軟性ビニル材料を使用。
CEマーキング適合宣言製品(TUV認定品)。(TUV証明書No.J50004167)
トレイケーブルとしても使用可能。
電気用品安全法に適合しています。
耐熱PVC絶縁体heat resistant PVC insulation
電気特性
・TC、MTW
・STO
許容電流
●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)
301.00
400.91
500.82
600.71
700.58
800.41
90-
100-
●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)電 線 数 No. of cables電流減少係数 Adjustment factors
2~30.70
40.63
5~60.56
7~150.49
16~400.43
61~0.34
41~600.39
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
301.00
400.93
500.86
600.77
700.68
800.58
900.45
1000.26
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。
・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。
・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.
・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.
※線心数表記“E”は、同等サイズの[Y/G]アース線入りとなります。 (例)3E×18AWG:2×18AWG+1×18AWG (アース)
※Core number mark “E” has the [Y/G] earth cable of an equal size.
導体(軟銅より線)stranded annealed coppers
UE/STO(N)/TC LF
・・・・
Y/G
3 2
1
4E
Y/G 2
1
3E
2
1
2C
1
2
5
43
Y/G
6E
表面印字 Surface Marking(1)18AWG~10AWGの場合/18AWG~10AWG cables
(2)8AWG~2AWGの場合/8AWG~2AWG cables
E209288(UL)TC 90℃ DRY 75℃ WET or MTW FLEXING VW-1 or STO 105℃ 600V VW-1 線心数×□□AWGc(UL) STO 105℃ 600V 線心数×□□AWG(○○mm2) FT1 TAIYO CE 300/500V <PS>E ** LF
E209288(UL)TC 90℃ DRY 75℃ WET or MTW VW-1 or STO 105℃ 600V VW-1 線心数×□□AWG c(UL) STO 105℃ 600V 線心数×□□AWG(○○mm2) FT1 TAIYO CE 300/500V <PS>E ** LF
2C3E4E6E2C3E4E6E2C3E4E6E2C3E4E2C3E4E6E3E4E3E4E3E4E3E4E
8(8.44㎟)
6(13.5㎟)
4(21.4㎟)
2(33.8㎟)
7/15/0.32
7/24/0.32
7/38/0.32
7/60/0.32
4.2
5.3
6.6
8.3
1.7
1.7
1.7
1.8
7.6
8.7
10.0
11.9
9.39.710.513.49.910.511.314.313.514.215.318.715.316.117.316.717.619.022.322.825.525.929.029.632.934.438.3
9511513522011513516526020524529543527533040034542552573069089595512301330171019102460
サイズSize
(AWG)181614121086432
22.614.08.855.553.502.261.370.8720.7260.559
60606050505050505040
2000200030003000300040004000400040004000
7101520253545607080
10131825304055708595
5812-20-----
導体抵抗Conductor resistance(Ω/km20℃)
絶縁抵抗Insulation resistance(MΩkm20℃)
①耐電圧Electrical strength(V/1min.) a
②許容電流(A)Allowable ampacity
b c a:3心及びその他の多心コードで3心のみに電流が流れるコードに適用b:2心及びその他の多心コードで2心のみに電流が流れるコードに適用c:5心及びその他の多心コードで5心のみに電流が流れるコードに適用
a:Apply to 3-conductor cords and other multiconductor cords connected to utilization equipment so that only 3 conductors are current-carrying.b:Apply to 2-conductor cords and other multiconductor cords connected to utilization equipment so that only 2 conductors are current-carrying.c:Apply to 5-conductor cords and other multiconductor cords connected to utilization equipment so that only 5 conductors are current-carrying.
②Allowable ampacity By National Electrical Code(NEC)
①上記UL、CSA規格の耐電圧試験の他に2000V/5分間の試験を実施しております。①The examination of 2000V/5 minute besides the withstand voltage test on the UL standard and the CSA standard that has been described to the top is executed,
②許容電流については、米国電気工事規定(NEC)により
18(0.89㎟) 35/0.18 1.2 0.85 2.9 1.7
2.25
16(1.34㎟) 53/0.18 1.5 0.85 3.2 1.7
2.25
14(2.14㎟) 84/0.18 1.9 1.25 4.4
2.25
12(3.34㎟) 66/0.254 2.4 1.25 4.9 2.65
10(5.27㎟) 104/0.254 3.1 1.25 5.6 2.65
3.13.53.53.93.94.34.34.7
2.65
認 証 Certification
適合規格 Applicable standard
形式記号 Official symbol
定格電圧 Voltage rating定格温度 Temperature rating
導 体 Conductor
難 燃 性 Flame rating
UL STO
UL 62
STO
600V105℃
UL 62
VW-1
cUL STO
CSA C22.2 No.49
STO
600V105℃
CSA C22.2 No.49
FT1
UL TC
UL 1277
TC
600VDRY90℃ WET75℃
UL 1277
Vertical-Tray Flame Test
UL MTW
UL 1063
MTW
600VDRY90℃ WET60℃
UL 1063
VW-1
TUV.CEマーキング
HD21.5(IEC60227-5)H05VV-F
(60227 IEC 53)300/500V70℃
HD383 Class 5(IEC60228 Class 5) EN50264-2-1(IEC60332-1)
Features
販売標準長 Standard sale length100m(切断販売が可能なサイズもございます。詳細は窓口にお問い合わせ下さい。)
100m(There are sizes that can be the cutting sales, too. Please inquire of sales staff in detail.)
例
○内数字は黒色絶縁体上の白色ナンバリングを示す。/Figures in ○ indicate white numbering on black insulator.
※Y/G線は緑地に黄色の3本埋込色帯(30~50%)となります。/Y/G indicates green core with yellow stripe(30~50%).
Standard UL, cUL.(Category ZJCZ, ZKHZ, QPOR, ZJCZ7)
Flame resisting : UL VW-1, cUL FT1.
It passes Vertical-Tray Flame Test of UL.
Oil, heat resistant and flexible PVC material is used.
CE marking(TUV recognition product).(Certificate of TUV No.J50004167)
It is possible to use it as a tray cable.
It suits Product Safety of Electrical Appliance and Materials.
・・・・
Electrical property
対象規格
表面印字
電気用品安全法(18~10AWG)電気用品の技術上の基準を定める省令第1項の別表第一ビニルキャブタイヤコード300V60℃
JIS C 3102
JIS C 3005の4.26.2のb)
電気用品安全法(8~2AWG)電気用品の技術上の基準を定める省令第1項の別表第一ビニルキャブタイヤケーブル600V60℃
JIS C 3102
JIS C 3005の4.26.2のb)
RoHS対応品
・・
RoHS
UE/STO(N)/TC LF
UE/STO(N)/TC LF
海外規格ケーブル
海外規格ケーブル
耐 熱 性 ★★★★★耐 油 性 ★★★★★耐ノイズ性 ★難 燃 性 ★★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★★※特性は目安となります。
認 証 Certification
適合規格 Applicable standard
形式記号 Official symbol
定格電圧 Voltage rating定格温度 Temperature rating
導 体 Conductor
難 燃 性 Flame rating
UL TC
UL 1277
TC
600VDRY90℃ WET75℃
UL 1277
Vertical-Tray Flame Test
UL MTW
UL 1063
MTW
600VDRY90℃ WET60℃
UL 1063
VW-1
TUV.CEマーキングHD21.5
(IEC60227-7)H05VV-F相当(60227 IEC 53)300/500V70℃
HD383 Class 5(IEC60228 Class 5) EN50264-2-1(IEC60332-1)
電気用品安全法電気用品の技術上の基準を定める省令第1項の別表第一ビニルキャブタイヤコード300V60℃
JIS C 3102
JIS C 3005の4.26.2のb)
特徴
構造図 Construction figure
構造表 Construction table
識別 Identification
ケーブルトレイ、レースウェイ配線用、電気機器電源用コードFor tray cable, race way and electronic equipment power supply code
電気特性
※線心数表記“E”は、同等サイズの[Y/G]アース線入りとなります。 (例)3E×18AWG:2×18AWG+1×18AWG (アース)
※Core number mark “E” has the [Y/G] earth cable of an equal size.
UE/STO-SB(N)/TC LF
a:3心及びその他の多心コードで3心のみに電流が流れるコードに適用
b:2心及びその他の多心コードで2心のみに電流が流れるコードに適用
a:Apply to 3-conductor cords and other multiconductor cords connected to utilization equipment so that only 3 conductors are current-carrying.b:Apply to 2-conductor cords and other multiconductor cords connected to utilization equipment so that only 2 conductors are current-carrying.
②Allowable ampacity By National Electrical Code(NEC)
①上記UL、CSA規格の耐電圧試験の他に2000V/5分間の試験を実施 しております。
①The examination of 2000V/5 minute besides the withstand voltage test on the UL standard and the CSA standard that has been described to the top is executed,
②許容電流については、米国電気工事規定(NEC)により
表面印字 Surface Marking
E209288(UL)TC 90℃ DRY 75℃ WET or MTW FLEXING VW-1 or STO SHIELDED 105℃ 600V VW-1 線心数×□□AWGc(UL) STO SHIELDED 105℃ 600V 線心数×□□AWG(○○mm2) FT1 TAIYO CE 300/500V <PS>E ** LF
Y/G
3 2
1
4E
Y/G 2
1
3E
2
1
2C
線心数No. of cores サイズ
Size(AWG)
2C3E4E2C3E4E2C3E4E2C3E4E
18(0.89㎟)
16(1.34㎟)
14(2.14㎟)
12(3.34㎟)
構成Construction(本/mm)
導 体Conductor
耐熱ビニル絶縁体Heat resistant PVC insulation
35/0.18
53/0.18
84/0.18
66/0.254
外径Outside diameter(mm)
1.2
1.5
1.9
2.4
厚さThickness(mm)
0.85
0.85
1.25
1.25
外径Outside diameter(mm)
概算質量Approx.weight(kg/km)
2.9
3.2
4.4
4.9
耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath厚さ
Thickness(mm)
1.7
1.7
2.25
2.65
外径Overall diameter 約approx(mm)
10.010.411.210.611.212.014.214.916.116.116.918.1
130145170145175205250290355335395470
サイズSize
(AWG)18161412
22.614.69.135.70
60606050
2000200030003000
7101520
10131825
導体抵抗Conductor resistance(Ω/km20℃)
絶縁抵抗Insulation resistance(MΩkm20℃)
①耐電圧Electrical strength(V/1min.) a
②許容電流(A)Allowable ampacity
b
UL STO.cUL STOUL 62
CSA C22.2 No.49
STO
600V105℃UL 62
CSA C22.2 No.49VW-1.FT1
Features
耐熱PVC絶縁体Heat resistant PVC insulation
テープTape
耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)
導体(軟銅より線)Stranded annealed coppers
すずめっき軟銅線編組Tinned annealed copper braid shield
RoHS
・TC
・STO
許容電流
●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)
301.00
400.91
500.82
600.71
700.58
800.41
90-
100-
●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)
電 線 数 No. of cables電流減少係数 Adjustment factors
2~30.70
40.63
5~60.56
7~150.49
16~400.43
61~0.34
41~600.39
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
301.00
400.93
500.86
600.77
700.68
800.58
900.45
1000.26
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。
・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。
・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.
・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.
販売標準長 Standard sale length100m 100m
例
○内数字は黒色絶縁体上の白色ナンバリングを示す。/Figures in ○ indicate white numbering on black insulator.
※Y/G線は緑地に黄色の3本埋込色帯(30~50%)となります。/Y/G indicates green core with yellow stripe(30~50%).
●
●
●
●
●
●
●
●
●
●
●
●
●
●
UL、cUL共用。
UL VW-1、cUL FT1の難燃対応。
UL垂直トレイ難燃試験に合格。
耐油耐熱柔軟性ビニル材料を使用。
CEマーキング適合宣言製品(TUV認定品)。(※H05VV-Fをベースとした遮蔽付ケーブルとして認定)(TUV証明書No.J2050492)
トレイケーブルとしても使用可能。
電気用品安全法に適合しています。
・・
・・
Standard UL, cUL.
Flame resisting : UL VW-1, cUL FT1.
It passes Vertical-Tray Flame Test of UL.
Oil, heat resistant and flexible PVC material is used.
CE marking(TUV recognition product).(※It is recognized as a cable with the cover based on H05VV-F)(Certificate of TUV No.J2050492)
It is possible to use it as a tray cable.
It suits Product Safety of Electrical Appliance and Materials.
対象規格
Electrical property
表面印字
・・
・・
RoHS対応品
・・UE/STO-SB(N)/TC LF
UE/STO-SB(N)/TC LF
海外規格ケーブル
海外規格ケーブル
耐 熱 性 ★★★★★耐 油 性 ★★★★★耐ノイズ性 ★★★難 燃 性 ★★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★★※特性は目安となります。
サイズSize
(AWG)
導体抵抗Conductor resistance(Ω/km20℃)
絶縁抵抗Insulation resistance(MΩkm20℃)
①耐電圧Electrical strength(V/1min.)
②許容電流(A)Allowable ampacity
線心数No. of cores サイズ
Size(AWG)
構成Construction(本/mm)
導 体Conductor
耐熱ビニル絶縁体Heat resistant PVC insulation
外径Outside diameter(mm)
厚さThickness(mm)
外径Outside diameter(mm)
概算質量Approx.weight(kg/km)
耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath厚さ
Thickness(mm)
外径Overall diameter 約approx(mm)
特徴
構造図 Construction figure
構造表 Construction table
識別 Identification
ケーブルトレイ、レースウェイ配線用、電気機器電源用コードFor tray cable, race way and electronic equipment power supply code
電気特性
※線心数表記“E”は、同等サイズの[Y/G]アース線入りとなります。 (例)3E×10AWG:2×10AWG+1×10AWG (アース)
※Core number mark “E” has the [Y/G] earth cable of an equal size.
UE/STO-SB(N)/TC LF
Y/G
3 2
1
4E
Y/G 2
1
3E
2
1
2C
表面印字 Surface Marking
E209288(UL)TC 90℃ DRY 75℃ WET or MTW FLEXING VW-1 or STO SHIELDED 105℃ 600V VW-1 線心数×□□AWGc(UL) STO SHIELDED 105℃ 600V 線心数×□□AWG(○○mm2) FT1 TAIYO CE 300/500V <PS>E ** LF
(1)10AWGの場合/10AWG cables
(2)8AWG~6AWGの場合/8AWG~6AWG cables
E209288(UL)TC 90℃ DRY 75℃ WET or MTW VW-1 or STO SHIELDED 105℃ 600V VW-1 線心数×□□AWG c(UL) STO SHIELDED 105℃ 600V 線心数×□□AWG(○○mm2) FT1 TAIYO CE 300/500V <PS>E ** LF
2C3E4E2C3E4E3E4E
3.53.53.9
17.518.419.822.924.126.827.230.3
410495600700840106011301420
1086
3.502.261.37
505050
300040004000
253545
304055
a b
10(5.27㎟) 104/0.254 3.1 1.25 5.6
8(8.44㎟) 7/15/0.32 4.2 1.7 7.6
6(13.5㎟) 7/24/0.32 5.3 1.7 8.7
2.65
3.1
Features
耐熱PVC絶縁体Heat resistant PVC insulation
テープTape
耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)
導体(軟銅より線)Stranded annealed coppers
すずめっき軟銅線編組Tinned annealed copper braid shield
・TC
・STO
許容電流
●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)
301.00
400.91
500.82
600.71
700.58
800.41
90-
100-
●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)
電 線 数 No. of cables電流減少係数 Adjustment factors
2~30.70
40.63
5~60.56
7~150.49
16~400.43
61~0.34
41~600.39
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
301.00
400.93
500.86
600.77
700.68
800.58
900.45
1000.26
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。
・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。
・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.
・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.
a:3心及びその他の多心コードで3心のみに電流が流れるコードに適用
b:2心及びその他の多心コードで2心のみに電流が流れるコードに適用
a:Apply to 3-conductor cords and other multiconductor cords connected to utilization equipment so that only 3 conductors are current-carrying.b:Apply to 2-conductor cords and other multiconductor cords connected to utilization equipment so that only 2 conductors are current-carrying.
②Allowable ampacity By National Electrical Code(NEC)
①上記UL、CSA規格の耐電圧試験の他に2000V/5分間の試験を実施 しております。
①The examination of 2000V/5 minute besides the withstand voltage test on the UL standard and the CSA standard that has been described to the top is executed,
②許容電流については、米国電気工事規定(NEC)により
販売標準長 Standard sale length100m 100m
認 証 Certification
適合規格 Applicable standard
形式記号 Official symbol
定格電圧 Voltage rating定格温度 Temperature rating
導 体 Conductor
難 燃 性 Flame rating
UL TC
UL 1277
TC
600VDRY90℃ WET75℃
UL 1277
Vertical-Tray Flame Test
UL MTW
UL 1063
MTW
600VDRY90℃ WET60℃
UL 1063
VW-1
CEマーキング
HD21.5(IEC60227-7)H05VV-F
(60227 IEC 53)300/500V70℃
HD383 Class 5(IEC60228 Class 5) EN50264-2-1(IEC60332-1)
電気用品安全法(10AWGのみ)電気用品の技術上の基準を定める省令第1項の別表第一ビニルキャブタイヤコード300V60℃
JIS C 3102
JIS C 3005の4.26.2のb)
電気用品安全法(8~6AWG)電気用品の技術上の基準を定める省令第1項の別表第一ビニルキャブタイヤケーブル600V60℃
JIS C 3102
JIS C 3005の4.26.2のb)
UL STO.cUL STO
UL 62CSA C22.2 No.49
STO
600V105℃UL 62
CSA C22.2 No.49VW-1.FT1 RoHS
対象規格
例
○内数字は黒色絶縁体上の白色ナンバリングを示す。/Figures in ○ indicate white numbering on black insulator.
※Y/G線は緑地に黄色の3本埋込色帯(30~50%)となります。/Y/G indicates green core with yellow stripe(30~50%).
●
●
●
●
●
●
●
●
●
●
●
●
●
●
UL、cUL共用。(カテゴリ QPOR、ZJCZ、ZKHZ、ZJCZ7)
UL VW-1、cUL FT1の難燃対応。
UL垂直トレイ難燃試験に合格。
耐油耐熱柔軟性ビニル材料を使用。
CEマーキング適合宣言製品。
トレイケーブルとしても使用可能。
電気用品安全法に適合しています。
Standard UL, cUL.(Category QPOR, ZJCZ, ZKHZ, ZJCZ7)
Flame resisting : UL VW-1, cUL FT1.
It passes Vertical-Tray Flame Test of UL.
Oil, heat resistant and flexible PVC material is used.
CE marking.
It is possible to use it as a tray cable.
It suits Product Safety of Electrical Appliance and Materials.
Electrical property
表面印字
RoHS対応品
UE/STO-SB(N)/TC LF
UE/STO-SB(N)/TC LF
海外規格ケーブル
海外規格ケーブル
耐 熱 性 ★★★★★耐 油 性 ★★★★★耐ノイズ性 ★★★難 燃 性 ★★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★★※特性は目安となります。
線心数No. of cores サイズ
Size(AWG)
構成Construction(本/mm)
導 体Conductor
耐熱ビニル絶縁体Heat resistant PVC insulation
外径Outside diameter(mm)
厚さThickness(mm)
外径Outside diameter(mm)
概算質量Approx.weight(kg/km)
耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath厚さ
Thickness(mm)
外径Overall diameter 約approx(mm)
特徴
構造図 Construction figure
STOW(A)LF
構造表 Construction table
識別 Identification
電気機器電源用コードFor electronic equipment power supply code
●
●
●
●
●
●
●
●
UL、cUL共用。
UL VW-1、cUL FT1の難燃対応。
耐油耐熱柔軟性ビニル材料を使用。
湿気のある場所に使用可能。
Standard UL, cUL.
Flame resisting : UL VW-1, cUL FT1.
Oil, heat resistant and flexible PVC material is used.
It is possible to use it for a moist place.
電気特性
※線心数表記“E”は、同等サイズの[Y/G]アース線入りとなります。 (例)3E×18AWG:2×18AWG+1×18AWG (アース)
※Core number mark “E” has the [Y/G] earth cable of an equal size.
Y/G
赤 白
黒
4E
Y/G 白
黒
3E
白
黒
2C
表面印字 Surface Marking
E65955(UL)STOW 105℃ 600V 線心数×□□AWG VW-1 OUTDOOR WATER RESISTANT TAIYOc(UL)STOW 105℃ 600V 線心数×□□AWG(○○mm2) FT1 WATER RESISTANT TAIYO <PS>E ** LF
2C3E4E2C3E4E2C3E4E2C3E4E2C3E4E3E4E2C3E4E3E4E3E4E
18(0.89㎟)
16(1.34㎟)
14(2.14㎟)
12(3.34㎟)
35/0.18
53/0.18
84/0.18
66/0.254
1.2
1.5
1.9
2.4
0.85
0.85
1.25
1.25
2.9
3.2
4.4
4.9
1.7
1.7
2.25
2.65
9.39.710.59.910.511.313.514.215.315.316.117.316.717.619.022.825.524.625.929.029.632.934.438.3
9511513511513516520524529527533040034542552569089576595512401340172019102460
サイズSize
(AWG)18161412108642
22.614.68.855.553.502.261.370.8720.559
524550403434292420
200020003000300030004000400040004000
71015202535456080
101318253040557095
導体抵抗Conductor resistance(Ω/km20℃)
絶縁抵抗Insulation resistance(MΩkm15℃)
①耐電圧Electrical strength(V/1min.) a
②許容電流(A)Allowable ampacity
b
3.93.94.34.34.7
10(5.27㎟) 104/0.254 3.1 1.25 5.6
8(8.44㎟) 7/15/0.32 4.2 1.7 7.6
6(13.5㎟) 7/24/0.32 5.3 1.7 8.7
4(21.4㎟) 7/38/0.32 6.6 1.7 10.0
2(33.8㎟) 7/60.0.32 8.3 1.8 11.9
2.65
3.5
3.13.5
Features
耐熱PVC絶縁体Heat resistant PVC insulation テープ
Tape
耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)
導体(軟銅より線)Stranded annealed coppers
認 証 Certification
適合規格 Applicable standard
形式記号 Official symbol定格電圧 Voltage rating定格温度 Temperature rating導 体 Conductor難 燃 性 Flame rating
UL STOW
UL 62
STOW600V105℃UL 62VW-1 RoHS
対象規格
cUL STOW
CSA C22.2 No.49
STOW600V105℃
CSA C22.2 No.49FT1
・STOW
許容電流
●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)
●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)
電 線 数 No. of cables電流減少係数 Adjustment factors
2~30.70
40.63
5~60.56
7~150.49
16~400.43
61~0.34
41~600.39
301.00
400.93
500.86
600.77
700.68
800.58
900.45
1000.26
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。
・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。
・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.
・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.
a:3心及びその他の多心コードで3心のみに電流が流れるコードに適用b:2心及びその他の多心コードで2心のみに電流が流れるコードに適用
※許容電流については、米国電気工事規定(NEC)により
a:Apply to 3-conductor cords and other multiconductor cords connected to utilization equipment so that only 3 conductors are current-carrying.b:Apply to 2-conductor cords and other multiconductor cords connected to utilization equipment so that only 2 conductors are current-carrying.
※Allowable ampacity By National Electrical Code(NEC)
販売標準長 Standard sale length受注生産品(生産ロットにつきましては営業窓口にお問い合わせください。)
Order production(Please inquire of Sales Department about the production lot.)
※Y/G線は緑地に黄色の3本埋込色帯(30~50%)となります。/Y/G indicates green core with yellow stripe(30~50%).
Electrical property
表面印字
電気用品安全法(18~10AWG)電気用品の技術上の基準を定める省令第1項の別表第一ビニルキャブタイヤコード
300V60℃
JIS C 3102 JIS C 3005の4.26.2のb)
電気用品安全法(8~2AWG)
電気用品の技術上の基準を定める省令第1項の別表第一ビニルキャブタイヤケーブル
600V60℃
JIS C 3102 JIS C 3005の4.26.2のb)
RoHS対応品
STOW(A)LF
STOW(A)LF
海外規格ケーブル
海外規格ケーブル
耐 熱 性 ★★★★★耐 油 性 ★★★★★耐ノイズ性 ★難 燃 性 ★★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★★※特性は目安となります。
サイズSize
(AWG)
導体抵抗Conductor resistance(Ω/km20℃)
絶縁抵抗Insulation resistance(MΩkm20℃)
①耐電圧Electrical strength(V/1min.) a
②許容電流(A)Allowable ampacity
b
特徴
構造図 Construction figure
Features
SE/ST(N)LF
識別 Identification
電気機器電源用環境型コードFor environmental electronic equipment power supply code
難燃TPEシース(黒色)TPE sheath(Black)
●
●
●
●
●
●
●
●
●
●
●
●
●
●
UL、cUL共用。(カテゴリ ZJCZ、ZJCZ7)
環境に配慮した材料設計をしております。
アウトガス発生を抑制した仕様になっており、クリーンルーム内での使用に適しております。
NEC規格品です。
本製品は非鉛、ノンハロゲン仕様となります。
低発煙性。
耐寒性に優れております。
Standard UL, cUL.(Category ZJCZ, ZJCZ7)
It designs by using the material that considers the environment.
It is a specification that controls the out gas generation, and it is suitable for use in cleanroom.
It is NEC standard product.
This product becomes non-lead and no halogen specification.
Low smoke evolution.
Excels in the low temperature resistance.
TPE絶縁体TPE insulation
Y/G
3 2
1
4E
Y/G 2
1
3E
2
1
2C
構造表 Construction table
※線心数表記“E”は、同等サイズの[Y/G]アース線入りとなります。 (例)3E×18AWG:2×18AWG+1×18AWG (アース)
※Core number mark “E” has the [Y/G] earth cable of an equal size.
線心数No. of cores サイズ
Size(AWG)
2C3E4E2C3E4E2C3E4E2C3E4E2C3E4E
18(0.89㎟)
16(1.34㎟)
14(2.14㎟)
12(3.34㎟)
10(5.27㎟)
構成Construction(本/mm)
導 体Conductor
TPE絶縁体TPE insulation
35/0.18
53/0.18
84/0.18
66/0.254
104/0.254
外径Outside diameter(mm)
1.2
1.5
1.9
2.4
3.1
厚さThickness(mm)
0.85
0.85
1.25
1.25
1.25
外径Outside diameter(mm)
概算質量Approx.weight(kg/km)
2.9
3.2
4.4
4.9
5.6
難燃TPEシースTPE sheath
厚さThickness(mm)
1.7
1.7
2.25
2.65
2.65
外径Overall diameter 約approx(mm)
9.39.710.59.910.511.313.514.215.315.316.117.316.717.619.0
90110130110130160195225280260320390340415510
E65955(UL)SE 105℃ 600V 線心数×□□AWG TAIYO c(UL)ST 105℃ 600V 線心数×□□AWG(○○mm2) FT2 TPE TAIYO LF
表面印字 Surface Marking
テープTape
導体(軟銅より線)Stranded annealed coppers
認 証 Certification適合規格 Applicable standard形式記号 Official symbol定格電圧 Voltage rating定格温度 Temperature rating導 体 Conductor難 燃 性 Flame rating
UL SEUL 62SE600V105℃UL 62Horizontal
cUL STCSA C22.2 No.49
ST600V105℃
CSA C22.2 No.49FT2 RoHS
対象規格
電気特性
1816141210
22.614.69.135.703.65
6060605050
20002000300030003000
710152025
1013182530
許容電流
●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)301.00
400.93
500.86
600.77
700.68
800.58
900.45
1000.26
●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)電 線 数 No. of cables電流減少係数 Adjustment factors
2~30.70
40.63
5~60.56
7~150.49
16~400.43
61~0.34
41~600.39
周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors
Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。
・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。
・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.
・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.
a:Apply to 3-conductor cords and other multiconductor cords connected to utilization equipment so that only 3 conductors are current-carrying.b:Apply to 2-conductor cords and other multiconductor cords connected to utilization equipment so that only 2 conductors are current-carrying.
②Allowable ampacity By National Electrical Code(NEC)
①The examination of 2000V/5 minute besides the withstand voltage test on the UL standard and the CSA standard that has been described to the top is executed,
a:3心及びその他の多心コードで3心のみに電流が流れるコードに適用
b:2心及びその他の多心コードで2心のみに電流が流れるコードに適用
①上記UL、CSA規格の耐電圧試験の他に2000V/5分間の 試験を実施しております。
②許容電流については、米国電気工事規定(NEC)により
販売標準長 Standard sale length受注生産品(生産ロットにつきましては営業窓口にお問い合わせください。)
Order production(Please inquire of Sales Department about the production lot.)
例
○内数字は黒色絶縁体上の白色ナンバリングを示す。/Figures in ○ indicate white numbering on black insulator.
※Y/G線は緑地に黄色の3本埋込色帯(30~50%)となります。/Y/G indicates green core with yellow stripe(30~50%).
Electrical property
表面印字
ハロゲン含有量(%)Halogen content
発煙量DmSmoke opacity
燃焼発生ガス(PH)Acid gas evolution
酸素指数Oxygen index
絶縁体Insulation
0%
105
3.5以上
-
シースSheath
0%
110
3.5以上
27
試験方法Method of test
--
ASTM E 662(NBS法)
JCS397A
JIS K 7201
材料特性
RoHS対応品
環境対応型ケーブル(ノンハロゲン仕様)SE/ST(N)LF
SE/ST(N)LF
海外規格ケーブル
海外規格ケーブル
耐 熱 性 ★★★★★耐 油 性 ★★★★★耐ノイズ性 ★難 燃 性 ★★★★柔 軟 性 ★★非移行性 ★★★★★移動特性 ★※特性は目安となります。