(p2p)manual of deviceclient.doc(p2p)

7
WANSCAM -IPCAM Using the program in LAN 1. After installing this program you will find this icon in your desktop--- 2. Double click to run the program,the following operation interface will be shown.In local area network1.Camera Set.Click here to add cameras in.

Upload: pierrebertin

Post on 19-Jan-2016

108 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: (p2p)Manual of DeviceClient.doc(P2P)

WANSCAM -IPCAM

Using the program in LAN

1. After installing this program,you will find this icon in your desktop---

2. Double click to run the program,the following operation interface will be shown.( In local

area network)

1.Camera Set.Click here to add cameras in.

Page 2: (p2p)Manual of DeviceClient.doc(P2P)

WANSCAM -IPCAM

3. Open camera list,you will find the following interface.Click Seach , the cameras information in LAN will

be found.

4. Double click the camera which you want to add in, input the device name, username and password.Pay

attention:jpeg stream should be choosen for JW series cameras.H264 stream should be choosen for HW

series cameras.

1.Open camera search interface

2.Click search , to find the camera in LAN.

Page 3: (p2p)Manual of DeviceClient.doc(P2P)

WANSCAM -IPCAM

5.Go back to the main interface of the program, drag the camera which you have just added to the blank.

2.Device name

4.Choose the right stream.JW series cameras should choose the jpeg steam.

3.Input the right username and password of the camera

1.Double click the camera IP address

5.Done

Press the left button,drag the camera to the blank.

Page 4: (p2p)Manual of DeviceClient.doc(P2P)

WANSCAM -IPCAM

Using the program from Internet

1. Run the program DeviceClient.Click device list,then click “add” to add cameras directly.

2.Tap device name,then input right username and password,choose ,input the camera P2P

number(The number can be found on the cameralabel),done.

1.Open device list

2.Click Add

Page 5: (p2p)Manual of DeviceClient.doc(P2P)

WANSCAM -IPCAM

3. .Go back to main operation interface of the program.

Choose P2P mode.

Choose right stream

Press the left button,drag the camera to the blank,release.

Page 6: (p2p)Manual of DeviceClient.doc(P2P)

WANSCAM -IPCAM

About the main interface

1, :PT(pan&tilt) control.

8. :Listen,Speak,Record,Snapshot,Close

Pay attention: This program is not that stable, if you get any probems, please inform us.

We are always in Service and will

always offer the best service for you!

3, :Tilt up and down

4, :Pan up and down

5 , : IR led for night visio

6 , : Time and date display.

7, :Mirror control

2, :Make the image upside down.

Page 7: (p2p)Manual of DeviceClient.doc(P2P)

WANSCAM -IPCAM

Thanks!