pack frame

7/28/2019 Pack Frame

1/4

The Three-Stick Roycroft Pack Frame

by Dick Baugh

How would you like a pack frame that is comfortable, strong, and can be made from natural materials in less than 1/2 hour? We were introduced to theRoycroft pack by Mors Kochansky at the Rabbitstick Rendezvous a few years ago.

Its an excellent lesson in self sufficiency, outdoor survival skills, knifecraft, lashing, multiple use of an object (blanket) and use of natural materials. Whatmore do you want? But is it primitive? I don't know if our stone age ancestors actually made this type of pack frame. We do know, however, that the"Iceman", whose remains were found after 5,300 years in the Alps between Italy and Austria, had with him a wood pack frame (1, 2, 3. See drawing also).

The archaeologists have released very few details on his pack frame but say that it was an inverted U shape. I also saw a photo taken in the Himalayas earlyin the 1900's of a simple inverted U-shaped pack frame. The Koreans have been using A-frame packs for centuries.

Essentially we are lashing together a triangular wood frame, wrapping our belongings in a blanket and tying the bundle to the frame. A single piece of thickcordage is then used as combination shoulder straps and waist band

The Frame

Cut three sticks for the frame. They should be about as thick as your thumb. The length of the bottom pieceshould be the width of your buttocks. Ideally it should also be slightly curved to fit your back. The length ofthe two side pieces should be equal to or slightly longer than the distance from your buttocks to the back ofyour head. I have heard of other ways to select the lengths but this works for me. In the past I have used greenwillow (Salix sp.) because it was available in the correct diameter, straight, plentiful and easy to cut and ifnecessary, bend. The Iceman's pack frame was made from hazelnut and larch. Hazelnut is a much tougher

wood than willow. The three sticks are held together by a combination of joints and lashing. Figure 1 showsdetailed dimensions of the pack that works best for me. As a reference point I am 5'8" tall and weigh 140pounds. If the pack frame is too short, then a greater fraction of the weight will be carried by your shoulders. Ifit is too long, then the shoulder straps will be very loose and the load will wobble from side to side.

Figure 2 shows two different kinds of joint that can be used to hold the sticks together, the lap (Abe Lincoln)joint or the butterfly joint, another Mors Kochansky original (4). I don't see much difference between the twobut the lap joint is possibly more appropriate if you have weak wood and strong cordage, whereas the butterflyjoint works well if you have stronger wood and/or weaker cordage. My frame uses a lap joint on top andbutterfly joints on the two bottom joints.

The lashing material can be any kind of vegetable fiber cordage or rawhide. It doesn't even have to be verystrong if the joints are tight. One joint on my pack is put together with finely shredded cattail leaf fiber,another with New Zealand flax and the third with willow bark cordage. Figure 3 shows one possible way oflashing. It isn't very critical since most of the strength should come from the joint.

http://www.primitiveways.com/pack_frame.html 1


2/4

The original strap for my pack frame was made from a worn out Volvo seat belt plus a piece of nylon rope. Strong, durable and comfortable but it wasn'tvery primitive. The strap I am now using is two-ply shredded cattail (Typha sp.) leaf rope. It is made with the middle part, used for the shoulder straps,thicker than the ends. For comfort, the straps should be at least one inch (2.54 cm) in diameter. The straps should taper down to 1/2 inch after they leave theshoulders to facilitate tying them around your waist.

Making straps out of cattail leaves is a good lesson in cordage techniques. Making a piece of cordage can be an abstract exercise which doesn't mean muchif you have no specific application for the cordage however making a piece of cordage for a particular application combines the "How to make it" with the"What do I use it for after I 've made it?". For optimum results gather the cattail leaves late in the growing season, before they have died and turned brown(5). Shred them into narrow strips. A coarse "comb" made by driving nails into a board is a useful tool for the shredding. Otherwise it can be done by hand.Finely shredded fibers will be stronger and more flexible. After shredding, the fibers should be dried and then moistened before twining.

Three-ply braided versus two-ply twined straps: take your choice. The important things are that the cattail leaves should be shredded finely to giveflexibility and the straps should be thick enough to give comfort.

Packing and tying on the load:

You want to pack your load in such a way that it is comfortable and everything is readily accessible without having to take it all apart. The best way I havefound so far is to wrap up your gear the same way you would a baby. Another analogy is to say the blanket is folded like an envelope. Fold your blanket intoa square and place it on top of the pack frame with the corners up, down, left and right. Place something soft, such as a coat or sweater, at the bottom forpadding where it will contact your lower back. This is very important. Otherwise the crosspiece digs into your lower back. Put the rest of your gear on theblanket. Fold up the bottom corner, and then wrap the left and right corners around the gear. Last, fold the top corner down. This way it is easy to accessanything by lifting up the top corner.

Tying the pack to the frame: Begin securing the load to the pack frame by first tying a rope to the center of the crosspiece. The load is then tied on inaccordance with Figure 4. It is critical to tighten the rope sufficiently that some of the soft padded portion of the pack protrudes through to keep thecrosspiece from contacting your lower back. That is shown in Figure 5.

Securing the straps:



3/4

Secure the center of the straps to the top of the pack as shown in Figure 6. It can be done as illustrated or with a "lark's head" knot. The straps then go overyour shoulders, around the bottom of the side pieces and then are tied around your waist. Once the straps are tied together you can leave the knot in placeand remove the pack simply by slipping the straps off the bottom of the side pieces.

Pack secured to the pack frame.

Field testing: My first real experience with a Roycroft pack was on a two week BOSS walkabout in south eastern Utah. I was using the Roycroft whereasmy compadres were using very simple blanket packs. None of us had very heavy loads. One big advantage of the Roycroft over the simpler pack was theease with which you could untie the pack, add something or take something out, and then re-tie it and be on your way. The other advantage was greatercomfort.

My next test of the Roycroft pack was to see how it did with a heavier load. I packed a heavy coat and 25 pounds (11.36 kilograms) of books in the Roycroftand took off on a 1 1/2 hour hike in the hills. This is where I learned that narrow straps don't work well. It is also important that there be enough padding inthe bottom of the pack to keep the cross piece off your tail. Other than that it works great.

Footnotes

(l.) 1993, "The Iceman", National Geographic, June, page 36.(2.) 1993, "Who Was the Iceman?", Popular Science, February, page 46.(3.) 1992, "The Long-Lost Hunter", Audubon, September-October, page 92.(4.) Mors Kochansky, "Northern Bushcraft", Lone Pine Publishing, ISBN #0-919433-51-0.(5) 1994, "SPT Fall Bulletin", pages 10- 17

Iceman's Backpack



4/4

Drawn to scale from photos in "The Man In The Ice" by KonradSpindler, 1994

Cross boards - Larch (Larix decidua). Only faces show traces ofbeing worked. Boards were split from small branches.Top board - 38.3 cent. long x 6.1 cent. wide x 1.2 cent. thick.Bottom board - 40.5 cent. long x 4.6 cent. wide x O.6 cent. thick.All boards had rounded end notches like bottom right.Rod - Hazel (Corylus avellana) 1.98 meters long.

This article was first published inThe Bulletin of Primitive Technology (Spring 1995, #9)

E-mail your comments to "Richard A. Baugh" [email protected]

The PrimitiveWays Book

The PrimitiveWays CD

Primit iveWays Home Page

PrimitiveWays1998 - 2003

http://wwwprimitivewayscom/pack framehtml 4

pack frame

Documents