1

PACKAGING

A & J Australia Pty Ltd

2

TITONWRAPAP SERIES

C O M P L E T EP A C K A G I N GS O L U T I O N S

THAT IS LIGHT, OH&SAND ENVIRONMENTAL

FRIENDLY

3

- Hold hand roll up-right with centre finger and index finger in core at top and bottom. (hand wrapping dis-penser can also be used)

- Hook start of film to bottom of pallet.

- Keep enough tension moving forwardaround the pallet wrapping the load, rather than backwards.

- If stronger load holding is re-quired cross arms banding centre and corners.

- Overlapping the film will also give secure load holding.

- Tear film from centre when finished wrapping

As pre-stretched film has already gone through that process, you are simply applying the film and not transforming it.

HOW TO USE TITONWRAP®

A & J Australia Pty Ltd

TITONwrap® is the new generation inuni-oriented and bi-oriented films, hence you get unrivalled performance in both directions when applied to a load.

LOOKS TOO GOOD TO BE TRUE?

LET US SHOW YOU MORE.

ASK FOR A NO OBLIGATION DEMOSTRATIONOF HOW THE OH&S and EVIROMENTFRIENDLY TITONWRAP® WILL SAVE YOU TIMEAND MONEY.

THE UNIQUE ADVANTEGES OF TITONWRAP®

- 50% less film used as the wrap hasalready been pre-stretched to gain the required properties.

- 20% less operator time per pallet, as he does not have to perform the stretch-ing function. TITONwrap® hand rolls re-duce worker fatigue and risk on injury.

- TITONwrap® machine rolls take away need for expensive wrappers.

- TITONwrap® offers superior load re-tention properties giving much greater protection.

- The reinforced edges reduce dramati-cally the potential for tearing.

- TITONwrap® is wider than any otherpre-stretch wraps on the market, hence less revolutions means less time and wrap required tofinish a load.

- Damage proof rolls: Roll damage wasteis a large problem with hand wrapping (10-15% waste) due to the frequent han-dling requirement by the operator. Often rolls are dented resulting in many me-ters of film having to be wasted. With TITONwrap® roll damage is nearly impos-sible due to the oscillated profile and the cushion effect of the air that is trapped during the winding process.

- Dropping a conventional roll of wrap can be frustrating as meters and meters of damaged wrap needs to be removed, TITONwrap® eliminates this problem with its unique wind up process.

- TITONwrap® is the new generation inuni-oriented and bi-oriented films, hence you get unrivalled performance in both directions when applied to a load.

4

TITONWRAP®: STRETCH WRAP PRE-STRETCHED FOREXTRA STRENGTH, BET-TER YIELD AND LIGHTER WEIGHT HANDLING

TITONwrap® is the latest innovation from AJ Stretch Films engineered to outperform all competitive pre-stretched hand and machine wraps – regardless of thickness. TITONwrap®reinforced edges provide unrivalled load-holding force, superior punc-ture and tear resistance and holds corners better on difficult loads. It’s lightweight roll and minimal neck down worktogether to reduce operator fatigue, allow maximum coverage and produce a better yield. With excellent clar-ity, TITONwrap® aggressive cling is designed to perform even in demand-ing sub zero cold storage applica-tions.

GET THE BEST RESULT WITHOUT THE EXPENSE OF A MACHINE! “IT WELL MAY BE WITH TITONWRAP®”

TITONwrap® is one-third the weight of a standardroll of hand wrap. A result of mod-ern technological advances, with more meters of wrap on a standard roll while still being lighter, re-ducing any unforeseen injuries in high frequency and small load appli-cations.

A & J Australia Pty Ltd

5

LETS LOOK AT THE HARD COLD FACTS ABOUT STRETCHWRAPPING BY HAND:

- It is the operator who is required to stretch the film (100 –150%) by physically pulling on the film in order to create the changes in the film required to hold the load together.

- An operator at best will stretch the film50% with most getting 10-15% IF AT ALL.

- It is physically impossible to get themaximum stretch, and even so on a continualbasis can often result in injuries and poor-lywrapped loads.

- As the corner of the load is used to pullagainst, during the stretching process it often limits the amount of stretch that can be created and thus limits the holding force that can be created.

- As the film has not been stretched to therequired minimum amount, the film will con-tinue to stretch instead of holding the load during transit, resulting in loads moving.

- Conventional wraps are thus veryinefficient and inconsistent when it comes to load containment., compared to new TITON-wrap®. TITONwrap® is pre-stretched hence corrects these inefficiencies

- TITONwrap® is already pre-stretched250% (maximum modulus) ensuring that thefilm has transformed into a tougher, stron-ger film with maximum holding force.

- As the film has already been stretched, the operator can simply apply the film rath-er than risk injury by having to pre-stretch it, no neck in,hence less wraps required.

- As the load is not used to pull the filmto create the stretch, potential damage due to pulling the film is eliminated.

- The job of pre-stretching the film isalready done, then your load will be wrappedwith maximum efficiency and consistency.

- The roll of film is lighter making it easier for the operator to handle

- There is more meters to each roll thusdramatically reducing your cost per palletwrapped.

- Pre-stretch film in conjunction with a lowcost non pre-stretch stretch wrapper is a fantastic alternative, saving you capital outlay on those expensive pre-stretch wrap-pers.

- Excellent in cold temperature environmentswhere stretching the film is nearly impos-sible due to the effects of subzero tempera-tures.

A & J Australia Pty Ltd

6

PRODUCT CATALOGUE

7

A & J Australia Pty Ltd

Hand Pre - stretch

72382 TITON 8um, Clear – 240/Pallet72383A TITON 10um, Clear – 240/Pallet72384A TITON 11um, Clear – 240/Pallet

Machine Pre - stretch

72396 TITON H/Duty - 50/Pallet72394 TITON Med/Duty - 50/Pallet72395 TITON EX/H/Duty - 50/Pallet72391 TITON S/Strong - 50/Pallet

Hand Conventional Wrap, Cast

72493C GS 20um, Clear - 160/Pallet72494C GS 23um, Clear - 160/Pallet72495C GS 25um, Clear - 160/Pallet72451 MMP 23um, Clear - 160/Pallet72452 MMP 25um, Clear - 160/Pallet

Machine Conventional Wrap, Cast

72501C GS 23um, Clear - 50/Pallet72438B MMP 17um, Clear - 50/Pallet72438 MMP 20um, Clear - 50/Pallet72438A MMP 23um, Clear - 50/Pallet72439 MMP 25um, Clear - 50/Pallet72439A MMP 26um, Clear - 50/Pallet72440 MMP 30um, Clear - 50/Pallet72440A MMP 35um, Clear - 50/Pallet

Hand Conventional Wrap, Blown

72432 KH 20um, Clear - 160/Pallet72426 KH 20um, Black - 160/Pallet72434 KH 25um, Clear - 160/Pallet72430 KH 25um, Black - 160/Pallet

Machine Conventional Wrap, Blown

72435 KH 20um, Clear - 50/Pallet72436 KH 23um, Clear - 50/Pallet72424 KH 25um, Black - 50/Pallet72437 KH 25um, Clear - 50/Pallet72437K KH 35um, Clear - 50/Pallet

8

A & J Australia Pty Ltd

Tape Dispenser

72531 (SL213-R) Tape Dispenser with 2 Rolls

Pallet Cap

72409 GS 840/1680 X 1680 23um - 250/Roll

Packaging Tape

72516 Acrylic Tape, Clear, 48mm x 75 meter - 36/CTN

72520 PP30 Tape, 48mm x 75mm - 36/CTN

72521 Acrylic Mchine Tape,48mm x 1000mm - 6/CTN

Pallet Cardboard

10321 1160 x 1160500 or 450/Pallet

9

• Digital Panel with iwth LED indicator forturntable / carriage speed, tension,wrapping counts and program mode.

• Complete solution to satisfy differentwrapping demands, includes two majorwrapping programs (Single / Double wrap)and three auxiliary programs (Reinforce /Unstable objects & Top Sheet wrap.)

• Memory setting function.

• Speed adjustment from panel to turntable,carriage and pre-stretch motor.

• RESET and over wrapping function.

• Handle operation for turntable and car-riage.

• START / STOP push button.

• Large emergency stop button.

•Top & Bottom counter from 0-9.

E-GO panel

COMPLETE FUNCTION

USER-FRIENDLY

Easy installationJust simplify fix the towerand unnecessary to takethe carriage apart.

Hinged for easy transport

Securityoperationspace

Forklift operation

Turntable Height: 76mmSuitable for cart usage

A & J Australia Pty Ltd

WORLD WIDE SERVICE

• Adopt reliable Schneider Telemecaniquebrand control parts include inverter,button, E.M.G. stop, fuse, and magneticcontactors.

10

HAND STRETCH WRAP DISPENSERS METAL

72419(SWDIDP00010)

72724• Frictional Brake• Photo Sensor• E-Go PanelOption: 2m, 2.4m, 3m

SEMI - AUTO SERIES AP150

72715• 100% Elelctromagnetic Brake• Photo Sensor• E-Go PanelOption: 2m, 3m, 2.4m

SEMI - AUTO SERIES AP200

72710• 250% Power Pre-Stretch• Photo Sensor• E-Go PanelOption: 2m, 2.4m, 3m

AUTO SERIES AP300

A & J Australia Pty Ltd

FULLY - AUTO SERIESAP260

72722• Remote Control• Auto Cutting and Clamping• 100% Elelctromagnetic Brake• Photo Sensor• E-Go Panel

72721• Remote Control• Auto Cutting and Clamping• 250% Power Pre-STretch• Photo Sensor• E-Go Panel

FULLY - AUTO SERIESAP360