page no. 1 | bee - graduate profile booklet 2021

Page No. 1 | BEE - Graduate Profile Booklet 2021

Page No. 2 | BEE - Graduate Profile Booklet 2021 Page No. 3 | BEE - Graduate Profile Booklet 2021


NUST - SEECSSchool of Electrical Engineering and Computer Science (SEECS) symbolizes a paradigm shift in the culture of higher education in Pakistan. It stands tall as an institute with a progressive vision and dynamic focus on the key imperatives of sound engineering education marked by quality of instruction and research on its newly built campus in the idyllic setting of federal metropolis.

Today it is one of the enviable seats of higher engineering education in Pakistan with an ambition to have a prestigious global stature of its own. It already enjoys international recognition as a centre of excellence. The school is fully committed to the promotion of IT and engineering education, marked by creativity, innovation and life-long learning.

01. NUST SEECS ............................................................5

02. Department of Electrical Engineering (DoEE).........6

03. Message from Head of the Department....................6

• Introduction to EE............................................................................7

• DoEE Faculty......................................................................................9

04. Bachelor of Electrical Engineering..........................10

• BEE Overview.................................................................................10

• BEE Course Outline ......................................................................11

• BEE Student Resume......................................................................13

Contents


The Electrical Engineering (EE) department at NUST SEECS currently offers an undergraduate degree in Electrical Engineering with various specializations and strong post-graduate program leading to PhD in Electrical Engineering. The EE department offers a broad range of EE courses, both elementary and advanced, spanning the whole gamut of EE disciplines including areas such as electronics, electrical machines, power engineering, control systems, communication systems and networks.

The EE department aims to achieve academic and research leadership in its subject area through its well-designed curriculum (that emphasizes conceptual understanding and fosters creativity) coupled with its strong focus on research, innovation, and industry-liaison. NUST SEECS also strongly emphasizes on imbibing the graduates with sound professional ethics.

To acquire prominence at national and international level as a unique source of quality education and distinguished research through its qualified faculty, state-of-the-art facilities and enabling environment, which stimulate all to excel in their respective endeavors to emerge as winners.

To develop EE graduates having a concrete knowledge base of EE discipline through a strong focus on teaching excellence and develop their analytical and problem solving skills through a strong focus on fostering research and innovation.

The EE program at SEECS is based on four Program Education Objectives (PEOs) that are elab-orated below and published in the program catalogue website and student’s handbook. The PEOs are listed below:

PEO-1: To produce employable graduates with core mathematical, scientific and engineer-ing concepts in the domain of electrical Engineering

PEO-2: To produce creative engineers equipped with sound analytical and problem solving skills to undertake real world challenges.

PEO-3: To produce responsible and ethical professionals with leadership qualities and ef-fective soft skills.

I hope and pray that you all are safe and healthy in this difficult time. The much-awaited time has come for yet another batch of engineering graduates of EE program to enter into the real world. I would like to congratulate all the graduating students at this moment of accomplishment, which has come after the successful culmination of four years of hard work and studies. In these extraordinary circumstances, the student’s commitment and dedication to complete their final year projects is truly commendable. I have personally witnessed presentations and demonstrations by the students in distance learning mode and I was amazed to see the diversity of the projects and their completeness despite limited means to complete the projects due to the lockdown. In order to become useful members of the engineering fraternity, you have to continuously learn and get accustomed to the new technologies and trends in engineering. On the other hand, this challenging time gives us a strong message that everything is connected with everything and how deeply each one of us is connected with everybody else in this human World. Therefore, you have strong responsibilities on your shoulders to give something back to society by not only keeping yourself healthy but also playing your part in becoming better citizens of the World. I wish you best of luck in your future endeavours and hope that the future holds promise for you. So go forth, work hard and make worthy contributions to your profession and society.

Department of Electrical Engineering

Message from Senior Head

Dr. Hassaan Khaliq

Department of Electrical Engineering

Academics

Department of Electrical Engineering Vision

Department of Electrical Engineering Mission

Program Educational Objectives (PEOs)


PEO-4: To produce enterprising professionals with a motivation for innovation and life-long learning.

The Department of Electrical Engineering at SEECS is committed to carry out cutting edge and productive research in the vast domain of electrical engineering. The research aims at:

• Utilizingthelatesttechnologicaladvancementsforthebettermentandadvancementof Society.• CateringtothedemandsandneedsoflocalindustryandstrategicR&Dorganiza-tions of the country.• Contributingtocuttingedgeresearchindiversifiedspecialtiessuchasadvanceddig-ital and analogue electronics, microwaves, communication, computer networking, signal processing and multimedia, computer vision and advanced controls for robotics.• Developmentofhighqualityandwell-groomedresearchprofessionals.

EE department is facilitating students with well equipped teaching and research labs. Detail f labs is as following:

Teaching labs1. Basic Electronics Lab (PG Block)2. Digital&EmbeddedSystemsLab(UGBlock)

Research Labs1. WISNET Lab (PG Block)2. CEFAR Lab (PG Block)3. CONNEKT Lab (GRC)4. AMSG Lab (GRC)5. Vispro lab (GRC)6. System Analysis and Verification (SAVe) (GRC)7. GSM Lab (PG Block)8. ESDA center (SMRIMS)9. IP Tech Lab (Cognet) (PG Block)10. Smart lab(GRC)11. SEIFLAR Lab (UG Block)

Research Aims/Objectives

Lab Facilities

At the Department of Electrical Engineering, we presently have a total of 48 faculty members. Of these 39 are PhDs qualified from leading universities of the world like GeorgiaTech, Michi-ganStateuniversity(USA),UNSW(Australia),Manchester&SouthamptonUniversities(UK),toname a few. Together this mic of highly proficient professionals provides a balanced team covering most of the areas of specialization in the discipline of electrical engineering.

Faculty

Senior HeadDr. Hassaan Khaliq QureshiPhd - City University London, UK

Digital Systems and Signal Processing

Dr. M. Shahzad YounisPh.D-University Technology Petronas, Malaysia

Dr. Osman HasanPhd-Corcodia University, Canada

Dr. Usman ZabitPhd-Institute of National Polytechnic de Toulouse, France

Dr. Khawar KhurshidPhd. Michiganstate University USA

Dr. Ahmad SalmanPhd-University of Manchester, UK

Dr. Rehan AhmedPhd-University of British Columbia, Canada

Dr. Arbab LatifPhd-King Fahd University

Dr. Wajahat HussainPhd-University of Zaragoza, Spain

Dr. Wajid MumtazPhd-University Teknologi, Malaysia

Mr. Arshad NazirMS-NUST Islamabad, Pakistan

Mr. Nasir MahmoodMS-BUAA, China

Mr. Muhammad Imran AbeelMS-NUST Islamabad, Pakistan

Dr. Muhammad ImranPhD-Sungkyunkwan University, South Korea

Dr. Muhammad Jamil Nawaz PhD - University of TUKL, Germany

Communication Systems and Networks

Dr. Syed Ali HassanPhd-Georgia institute of Tech, USA

Dr. Fahd Ahmed KhanPhD- King Abdullah university, Saudi Arabia

Dr. S. M Hassan ZaidiPhd-University of South Florida, USA

Dr. Rizwan AhmadPhD-Victoria University, Australia

Dr. Salman Abdul GhafoorPhD - University of Southampton, UK

Dr. Naumana AyubPhD-City University Of London, London

Dr. Huma GhafoorPhd-Univeristy of Ulsan South, Korea

Dr.Syed Taha AliPhD - University of New South Wales, Australia

Mr. Yasir Iqbal MS - University of Gävle, Sweden

Dr. Sajjad HussainPhd-Dublin University, Ireland

Dr. Umair Sajid HashmiPhd-University of Oklahoma, USA

Dr. Mohaira AhmadPhD-Jihangsu University, China

Mr. Ahsan Azhar MS -University of Gavle Sweden, Sweden

Electronics, Power and Control

Dr. Ammar HasanPhd-Imperial College London, UK

Dr. Farid GulPhD - Beihang Univesity China, China

Dr. Usman KhanPhd-University of Roma Italy

Dr. Muhammad Latif Anjum PhD- Politecnico di Torino, Italy


The Bachelors degree program in Electrical Engineering is spread over four years of study/ the program follows Outcome based Education System of Washington Accord. In essence, the first three semesters of the undergraduate curriculum focus primarily on strengthening the founda-tions which are essential for engineering major. These include mathematics, basic sciences, com-puters, fundamental concepts in analog and digital electronics and their practical skills. The cur-riculum aims at developing a high degree of proficiency in solving mathematical, scientific and engineering problems. Practical skills such as analysis and design are a vital component of engi-neering education and are needed to translate ideas into physical reality.

The Bachelor of Electrical Engineering program at NUST_SEECS encompasses a broad spectrum of knowledge areas including Electronics (Digital and Analog), Signal Processing and Commu-nicationSystems,Controls Systems andRobotics,Electromagnetic&Electrooptics,ElectricalEnergy Generation and Distribution.

Formal course work in the remaining semesters include in-depth study of the various sub -fields of the respective engineering curricula. Wherever required, design has been supplemented with practical work. The undergraduate program has a strong component of design. The curriculum also includes some product development courses that enable the students to estimate and manage resources for the implementation of a product.The seventh and eight semesters consists of professional advance level courses focusing on various focus areas of EE. The final year design project is also included in the degree plan that may be the collaboration of industry to prepare the students to start their career as a professional engineer and give them confidence to apply their knowl-edge according to the needs of the industry.

Students are provided an opportunity to undergo Internship with reputed public and private sector enterprises during the summer holidays. This exercise exposes them to the production and management policies being im-plemented in those organizations. It also allows the students to gain practical experience in the own field of en-gineering discipline and also provides avenues for employment to students in the organizations where they carry out this training.

Bachelor of

Electrical Engineering (BEE)Program Description

Program Details

Important Courses

Senior HeadDr. Hassaan Khaliq QureshiPhd - City University London, UK Dr. Rana Iftikhar AhmadPhD - University of Versailles, France

Engr. Shakeel AlviMS GWU, USA

Mr. Mansoor Shaukat MSc Electronics - UK

Dr. Kamran ZebPhD- Pusan National University, South Korea

Dr. Mansoor AsifPhD- Hanyang University, South Korea

Ms. Neelma NazMS - EME, NUST Pakistan.

Dr. Hasan Arshad NasirPhd-University of Melbourne, Australia

Mr. Habeel AhmadMS-Michigan State University, USA

Dr. Mansoor Ali Khan Phd-University Sydney, Australia

Dr. Zubair RehmanPhD- Massey University

Dr. Hina Gohar AliPhD - Univrtsitat Autonoma de Barcelona, Spain

Dr. Ahmed RasheedPhd-University San Yat Sen, China

Dr. Rameez HayatPhd-University of Munich, Germany

Dr. Jawad ArifPhd-Imperial College London, UK

Dr. Nauman KhurshidPhD- LUMS, Pakistan

Dr. Usman Ali Phd-Georgia institute of Tech, USA

Career Outcomes


BEE-Curriculum

S. No. Course Code Subjects CHs Semester

1 MATH101 Calculus and Analytical Geometry (3-0-3)

1st

2 ME104 Engineering drawing (0-1-1)3 HU100 English (2-0-2)4 CS113 Introduction to Programming (1-1-2)5 MATH121 Linear Algebra and ODE’s (3-0-3)6 HU107 Pakistan Studies (2-0-2)7 PHY101 Applied Physics (3-1-4)

Total CHs (14-3-17)1. EE111 Linear Circuit Analysis (3-1-4)

2nd

2. ME100 Engineering Mechanics (3-0-3)3. HU101 Islamic Studies (2-0-2)4. ME105 Workshop Practice (0-1-15. MATH106 Multivariable&Vectorcalculus (3-0-3)6. CS212 Object Oriented Programming(OOP) (3-1-4)

Total CHs (14-3-17)

1 EE221 Digital Logic Design (3-1-4)

3rd

2 CS250 Data Structures and Algorithms (3-1-4)3 EE211 Electrical Network Analysis (3-1-4)4 ME105 Workshop Practice (0-1-15 EE215 Electronic Devices and Circuits (3-1-4)6 HU109 Communication Skills (2-0-2)7 EE215 Electronic Devices and Circuits (3-1-4)8 HU109 Communication Skills (2-0-2)9 EE222 Microprocessor Systems (3-1-4)10 MATH361 Probability&Statistics (3-0-3)

Total CHs ((14-3-17)1. MATH351 Numerical Methods (3-0-3)

4th2. EE260 Electrical Machines (3-1-4)3. E-313 Electronic Circuit Design (3-1-4)4. EE351 Communication Systems (3-1-4)5. EE241 Electromagnetic Field Theory (3-0-3)

Total CHs ((15-3-18)

1 EE379 Control Systems (3-1-4)

5th2 EE330 Digital Signal Processing (3-1-4)3 ECO130 Engineering Economics (2-0-2)4 EE 383 Instrumentation and Measurements (3-1-4)5 EE XXX Elective-1 (3-X-X)

Total CHs ((14-3+X-17+X)

1. CS352 Theory of Automata and Formal Lan-guages 3

6th2. HU222 Professional Ethics 23. MATH333 Numerical Analysis 34. XX-xxx CS Elective – III 35. XX-xxx University Elective – II 36. XX-xxx University Elective –III 3

Total CHs 17

1. CS354 Compiler Construction 3 1

7th2. CS499 Senior Project 0 33. MGT271 Entrepreneurship 2 04. XX-xxx CS Elective – IV 3 X5. XX-xxx University Elective -IV 2+X X

Total CHs 10+X 4+X

Overall CHs 111+X 20+XGrand Total (Credit Hours) 133+X


BESEStudent Resumes

Student Name Page no.

1 Arooba Rehman 162 Ahsar Nasir 173 Abdur Rehman Amjad Virk 18

4 Syed Shayan Sohail 195 Ahmad Sadiq Saeed Butt 206 Hassan Mahmood Khan 217 Mominah Asif 228 Huzaifah Tariq 239 Maaz Khaleeq 2410 Maham Shahid 2511 Muhammad Khalid 2612 Muhammad Husnain Ali 2713 Muhammad Ali 2814 Muhammad Bilal 2915 Muhammad Hamza 3016 Muhammad Mustafa Umae Gondel 3117 Sadia asif 3218 Sardar Hassnain Ali 3319 Syed Momin Ali Hashmi 3420 Tauqir Hassan 3521 Muhammad Usama Mirza 3622 Zeerak Naveed 3723 Ahmed Usman 3824 Aleesha Ayyaz Abbasi 3925 Ammar Ahmed 4026 Anwar Sarwar 4127 Muhammad Ahmed Khan 4228 Shan 4329 Ali Zain ul Abideen 4430 Rao Waqas 4531 Syed Shaharyaar Hussain 4632 Talha Mehboob 4733 Shaheer Mehmood Bhatti 4834 Hadi Askari 4935 Haniya Akhtar Anjum 50


36 Hasham Mukhtar 5137 Izza Hashmi 5238 Muhammad Haris Naveed 5339 Muhammad Usamah Shahid 5440 Muhammad Zeeshan Karamat 5541 Muhammad Ahmad 5642 Mashhood Ahmad Qureshi 5743 Moazama Irfan 5844 Mubashra Zareen 5945 Muhammad Hamza Siddique 6046 Muhammad Huzaifa 6147 Muhammas Qasim Noor 6248 Muhammad Owais 6349 Muhammad Sulaiman Nadeem 6450 Muhammadsd Uzair Khattak 6551 Nayyerh Naeem 6652 Muhammad Serat Hussain 6753 Siraj Muneer Qazi 6854 Syed Wasif wajahat 6955 wajahat Ali 7056 Zahra Javed 7157 Hadia Saleem 7258 Khan Moeen Danish 7359 Muhammas Raees Arshad 7460 Abdur Rafay 7561 Sarwa Jalees 7662 Sikandar Bakht 7763 Zarlish Ashfaq 7864 Azhan Naqeeb 7965 Azka Azhar 8066 Muhammad Amir 8167 Faizan Ahmad 8268 M Mughal 8369 Muhammad Obaid ur Rehman 8470 Salman Nasir 85


71 Sardar Hassan Arfan Khan 8672 Urwa ul Wusqa 8773 Danyal Saqib 8874 Gul e Zahra 8975 Jannat Ayyaz 9076 Momin Ahmad Khan 9177 Abdul Mohamin Hashmi 9278 Muhammad Talha Bhatti 9379 Musa Jabbar Taib 9480 Nida Haq 9581 Noor Waqar 9682 Shahzaib Saqib Warraich 9783 Shanawar Ali Chouhdry 9884 Sheeraz Ahmed 9985 Syed Haider Ali 10086 Syed Usama Minhaj 10187 Talha Nasir 10288 Talha Kamran 10389 Zain Amir Zaman 10490 Zain Ishtiaq 10591 Abdulah Nadeem 10692 Muhammad Abdullah tariq 10793 Abdullah Bin Iftikhar 10894 Ajwad farooq 10995 Ammaz Anwar 11096 Saad Nadeem 11197 Muhammad Osama Nusrat 11298 Faraz Awan 11399 Syed Muhammad Izhar Zaidi 114100 Usama Ahmad 115101 Abdul Aziz Chaudhry 116102 Farheen Asif 117103 Muahmmad Shaarif 118104 Ayman Tanveer 119105 Fiza Faisal 120


106 Daniyal Zahid 121107 Sana Shakeel 122108 Tabeer Sajjad 123109 Fatima Irfan 124110 Sher Shah Ejaz 125111 Syed Saad 126112 Muhammad Hamis Haider 127113 Hannah Nadeem 128114 Syed Hassaan Muzammil 129115 Muhammad Hassaan Yousaf 130116 Huzaira Javed 131117 Mannan Rauf 132118 Muhammad Mubashir Ahmed 133119 Muhmammad Faraz Ul Abrar 134120 Muhammad Talha 135121 Muhammad Salman Afzal 136122 Nayab Tajved 137123 Neha Sultan 138124 Shaheer Sajid 139125 Somia Nasir 140126 Umair Raza 141127 usman Khawar 142128 Usman Ahmad Siddiqui 143


AROOBA [email protected]

https://www.linkedin.com/in/arooba-rehman-a79785203/

I am a Student of BS Electrical Engineering (SEECS) currently in 8th Semester with CGPA 3.27. MyGoal is to secure a challenging position in a reputable organization to expand my learnings,knowledge, and skills.

NUST H-122017 BEE

Army Burnhall College, Abbottabad.2016 Intermediate

Army Public School, Bahawalpur.2014 Matric

Sep IPT Lab PresentQuantifying Error in LoRa Signal Transmission.

ROMI Lab Seecs ~ 2019June August

Summer Internship: Interfacing ROS with EV3 Lego Robot.

C/C++ programming Embedded C on Arm Cortex, Arduino controllers.

Machine Learning: Neural Networks and Deep LearningPython3

HTML5, CSS PHP and SQL, JavaScript and jQuery

Familiar with MATLAB and ProteusAUTOCAD

Hand Gesture Recognition System: Using Python libraries and OpenCV and concept of Neural Networks.IOT Enabled Coffee Machine: ARM CORTEX M4 used as microcontroller, ESP8266 module for Wi-Fi connection. Also used ICs, Motors, and sensor.Home Automation: Arduino used as microcontroller with HC-05 Bluetooth Module to connect with Mobile App.

Reading, Content Writing,Swimming, Baking.

Securing First Position in BurnHallCollege.

Project Insaniyat held at Seecs Nust.Volunteer at Froods Organization.

Ashar Nasir

[email protected]

https://www.linkedin.com/in/asharnasir/

To strive for excellence in industry and enhance the automation opportunities for potential

manufacturers. Contribute to the scientific community and to keep learning everyday

Dar e Arqam School, Sharaqpur2015 Matric

GCU, Lahore2017 FSc

SEECS, NUST2021 BEEE

2018 Internship at WWF

2018 Project Insaniyat

E-Commerce Consultant2020

2020 Research Paper in Hybrid ASR

Programming Python, C++, Java, Assembly

MS OfficeGeneral

Engineering Verilog, PSpice, Autocad

Microprocessor-based Motor Controller

Digital Logic based traffic controller

Deep Learning based Hybrid Speech Recognition

Desktop App development

Blogging

Cricket

Matric District Position Holder

Project Insaniyat

Volunteer

Covid Response Team


Abdur Rehman Amjad [email protected]

https://www.linkedin.com/in/abdur-rehman-amjad-virk-a889761a1

Ambitious and learning attitude combined with dedication and result oriented mindset. Persistentlytrying to increase my skillset and experience. Likes to work in a team and would love to lead onewith an outlook for creative solutions

National University of Sciences and Technology, Islamabad2021 BEE

Government College University, Lahore2017 Inter

InstituteYear Degree

Sep 2020 FreelancerPresent

Data Analyst, Data Visualization, Data Entry

Coding Matlab, Python, R

PSPICE, MultiSIM, LTSPICESimulation

Architecture Intel X-86, ARM-Cortex

Investigation of effects of Antidepressants on Depression involving QuantitaiveEEG DataIn this project, we have worked to devise a channel to properly classify adepressive patient as responder or non-responder to a specific anti-depressivedrug.

Book ReadingBedmintonTable TennisE-GamingArticles

Digital Market SpecializatoinData Analyst Specialization

Sahara Project

Syed Shayan [email protected]

https://www.linkedin.com/in/syed-shayan-sohail-732983185/

I am a dedicated, hardworking and proactive Electrical Engineer with a strong background inEmbedded System Design, Hardware Programming, Logic Building and Control systems andOperating systems. I am currently looking for an opportunity to utilize my knowledge and skillsin a working environment and become a valuable asset to the organization that I work for.

School of Electrical Engineering & Computer Science, NUST2021 BEE

Fauji Foundation College Rawalpindi2017 HSSC

Fauji Foundation College Rawalpindi2015 SSC

July-2019 Sigma Lab, SEECS NUSTAug-2019Worked on development of a Multi-channel custom DAQ board.

FreelancingApril 2020 Present

Projects include knowledge areas of Embedded Systems Design, Problem Solving and Programming.

EE Digital and Embedded Systems Design, Control Systems

Verilog, VHDL, FreeRTOS, mbedOS, Signal ProcessingEE

CS Programming (Python, C, C++), MATLAB, AI, ML

Msft Excel, Business & Technical Writing, Critical ThinkingSoft Skills

Smart Traffic Controller using VHDLGesture Controlled Robot using stm32f103c8t6 running RTOS8x8x8 LED Cube using Universal Shift RegistersDevelopment of Modular EEG Framework for teaching, training & Data Collection (FYP)

Interest in Physics & Astronomy

Tech Enthusiast

Volley Ball & Snooker

Prime Minister Laptop Schemeawardee

3 x High GPA scholarship awardee

Food Ration Drive

Project Insaniyat: Collection of Funds and Cloths for poor and orphans


Ahmad Sadiq Saeed [email protected]

https://www.linkedin.com/in/ahmad-saeed-09b1b41a6/

A passionate worker who gives his all to whatever he devotes himself to and has demonstratedtrack record of completing projects on time within the budget limits.

National University of Sciences & Technology2021 Bachelors

Punjab Group of Colleges2017 Inter

Imperial International School and College2015 Matric

2018 Freelance WriterPresent

Actively participating in freelance writing work

Volunteer2019 Present

Visited many orphanages and involved orphans in variouseducational activities

Machine Learning MATLAB

MS OfficeC++

Leadership Teamwork

OrganizationalTime Management

1. EEG based automatic diagnosis of depression2. Music Visualizer: Designed and fabricated on micro c ontroller TM4C123g.3.Made a ping pong game using LEDs as all the objects involved utilizing theconcepts of Digital Logic Designing.4.Proposed an efficient hybrid engine model.

FootballCricketPing PongTrekkingTravellingE-gaming

Participation in Kangaroo GlobalCompetitionParticipation in ISMO GlobalCompetition1st Position in IntermediateAcademic from the region

Project Insaniyat : Visited anorphanage and provided rations to avillage nearby

HASSAN MAHMOOD [email protected]

https://www.linkedin.com/in/hassan-mahmood-khan-6a781119b/

I consider myself as a passionate and vibrant individual who enjoys participation. My aim is todeliver on my targets with the aid of innovation, concentration, and composure. As far as myinterests go, I wish to able to work on newer technologies alonside conventional ones, in order toobtain a holistic understanding of global trends in the industry.

National University of Sciences and Technology2021 Bachelor's in Electrical Engineering

Beaconhouse Educational Complex2017 A-levels

Beaconhouse Educational Complex2015 O-levels

Sep 2018 Team Leader Talent Management, AIESEC in NUSTOct 2019

- Recruit the best set of individuals.- Manage, train, and retain top-performing members.- Lead a diverse team, delegate tasks and monitor results.

Director Inventory and Merchandise, Orientation of NUSTJuly 2019 Oct 2019

- Design attractive and cost-effective merchandise.- Engage a diverse spectrum of individuals via efficient marketing strategies.- Maintain inventory for logistical and financial awareness.

Data Science Programming skills i.e., C++, Python

Machine Learning, Artificial Intelligence, Computer VisionData Science

Electrical & Power MATLAB, Simulink, Autocad etc.

Critical thinking, Conflict resolution, Leadership, FlexibilityInter-personal Skills

Regional Finalists - Microsoft Imagine Cup 2020We competed to develop an original technology project. Our project aimed atreducing the hazards associated with the use of earphones by individuals i.e.,pedestrians, workers etc. by creating an application which alerts the user of theimminent danger via a warning (audio & pop up), using Machine Learning.

- Sports- Athletics- Current Affairs- Travel enthusiast

- Winners - Intra-NUST Football2019- Regional Finalists - MicrosoftImagine Cup 2020

- Volunteer work for ProjectInsaniyat, Chadar NUST- WWF Intern/Volunteer


Mominah AsifEmail ID: [email protected]

LinkedIn ID: https://www.linkedin.com/in/mominah-asif-4977661a4/

An enthusiastic electrical engineer seeking opportunities to uncover her fullpotential while creating an impact

National University of Sciences & Technology 2021 Bachelors

Punjab Group of Colleges2017 Intermediate

PakTurk International Schools and Colleges2015 Matric

Aug/2020 Pak Elektron LimitedSep/2020Worked in the Procurement and Construction department (EPC) to carry out thedesigning of electrical components in the grid station

Honda Atlas Cars Pakistan LimitedJune/2019 July/2019

Worked at the Assembling Unit, Manga Mandi, to carry out the loading procedures and standards where I managed stock handling procedures and warehousing techniques of storing and loading different parts of automobile

Teamwork Data Analysis

Problem SolvingData Analysis

Microsoft Office Machine Learning

Technical and Soft SkillsAutocad

1. EEG based automatic diagnosis of depression2. Jail Management: ObjectOriented Programming in C++ like file, image and data handling3. Music Visualizer: Designed and fabricated on microcontroller TM4C123gh4. Password Based Attendance System

1. Trekking2. Cycling3. Badminton4. Table Tennis5. Photography6. Reading7. Writing

1. Bronze medalist in Turkish Poem reciting2. Organized a trekking trip tothe Mushkpuri Peak budgeted at 120,000 PKR

1. Project Insaniyat: Visited orphanages and villages for food drives2. Interned at WWF Pakistan where I did 30 hours of community services program3. Interned at The citizens foundation where I taught underprivileged kids from remoteareas

HUZAIFAH [email protected]

https://www.linkedin.com/in/huzaifah-tariq-3414411a1/

Seeking employment in a professional environment where I can diversify and improve upon my skills as an Electrical Engineer while making a significant contribution to the success of the company.

National University of Sciences and Technology (NUST)2021 B.Sc (EE)

Government College University (GCU)2017 F.Sc

Cadet College Hasan Abdal (CCH)2015 Matric

08/2020 Freelancing as a Content Writer on UpworkPresentI am working mainly as a blog writer. Moreover, I also did some novel rewriting along with writing articles on technical and academic topics.

OrganizationFrom To

Brief summary of key responsibilities - work / research experience

EE Machine Learning.

MATLAB, LabVIEWSoftwares

Graphic Designing Adobe Photoshop, Adobe Illustrator, Adobe Premiere Pro

Active Listening, Logical Thinking, Team WorkSoft Skills

FYP - Investigation of the effects of antidepressants on depression involving quantitative EEG data.Machine Learning - Improving hand drawn images using pix2pix.Machine Learning - Image Classifier using pytorch libraries.

3rd Position in All Pakistan Declamation (2013)

Participated in International Kangaroo Linguistic Contest (2014)

Participated in International Kangaroo Mathematics Contest(2006 - 2007)

Participated in DAWN Spelling Bee (2010 - 2011)

Rewarded with CM Laptop for achieving 26th position in Rawalpindi Board matric examinations.

Project Insaniyat (2017)

A community service project in which we decided to help the underprivileged part of society by some financial or asset-basedcontribution.


MAAZ [email protected]

linkedin.com/in/maazkhaleeq

Motivated fresh graduate who demonstrates excellent problem solving and leadership skills eager for an opportunity to learn and grow. Able to critically think and implement concepts and ideas to solve business challenges and help a company expand.

Saint Mary's Academy (6A*s & 3As)2015 O-Levels

Benchmark School System (3A*s & 1A)2017 A-Levels

NUST SEECS Electrical Engineering2021 Bachelors

24/06/19 Jazz11/08/19

Devised a Health and Safety Manual that ensured safe working environment for employees at JazzCompleted a project that highlighted how the company was wasting millions to power factor penalties and how to save them by using capacitor banksFrom To

Programming C, C++, R, Python, MATLAB, Octave

Pytorch, Tensorflow, KerasML Frameworks

Courses Machine Learning, Image Processing, Computer Vision

MS Word, Powerpoint, ExcelSoft Skills

FYP: Development of Deep One Class ClassifierProject: Sound Classification using Convolutional Neural NetworksProject: Simulating motion blur for gaming videosSpecialization: Deep Learning by Andrew Ng

Vice President Resources at Orientation of NUST 2019Director Accounts at Nust Entrepreneurs ClubDeputy Director Finance at NUST Olympiad 2019Deputy Director Accounts at Orientation of NUST 2018

Winner Unilever Talent Hunt 2020: for proposing innovative idea of plastic free future that supported sustainable agricultureSemi Finalist Unilever Future Leaders League 2020: Represented Pakistan on an international level to cater to the challenge of infusing purpose and driving penetration for Dove Hand and Body products

Volunteer for Project Insaaniyat

Maham Shahid

[email protected]

https://www.linkedin.com/in/maham-shahid-081915195/

I am seeking employment in a reputable company and in challenging environment so that I can

polish my skills. I want to excel in the field of embedded systems with perseverance, hard work and

dedication.

IMCG-F7/42015 Matriculation

IMCG-F7/22017 Fsc-Pre eng

NUST-SEECS2021 BEE

N/A

Embedded Verilog/VHDL/Xilinx/Free-RTOS

MATLABImage Processing

Programming C/C++

Technical writing and communication skills.Communication

I have done my final year project(FYP) in Digital image processing and

embedded systems design domain.

-Basket Ball

-Cricket

-Insaniyat Project(2017)


FULL [email protected]

https://www.linkedin.com/in/maleeha-khalid-b035001a4

Enthusiastic student currently studying Electrical Engineering. An individual with strong work ethic and ability to work independently. Strong organisational and team collaboration skills with experience in improving processes.

NUST2021 B.Sc (EE)

IMCG G-10/22017 F.Sc

IMCG G-10/22015 Matric

10/3/2020 Community Intern at Yneer Lounge20/4/2020Building an online community that aims at helping people in buying and selling by the aid of Travellers. We developed skills that aid in team work, better communication and interpersonal skills.

Content Writer at MOON MONIFeb,2020 May,2020

Learned to write and edit high-quality content. Managed competing deadlines with efficiency. Used Microsoft Word to write and submit error-free content.

Software Microsoft Office

MATLAB, PSPICE,Lab View, ADS, LogixproSoftware

Writing Content Writing and Editing (Beginner level)

Team work, problem solving, stress managementCommunication

Gesture controlled Wireless Robotic hand movement using Arm CortexLuggage protection deviceMobile phone detection

Social Work (Plantation)

Content Writing

Online Educational Courses

Games (Badminton, Cricket)

Working in NUST Societies (ACM)

Awarded with PM Laptop

Participant in CloudSeekho initiative and got swags

Attended Ufone Master Classes and Telenor Design Thinking workshop and got certificates

Volunteer at Insaniyat community service.

It was a community service project in which we decided to help the underprivileged part of society and made some sort of financial/asset-based contribution.

Muhammad Husnain [email protected]

https://www.linkedin.com/in/muhammad-husnain-ali-276396135

To obtain an opportunity to use my technical and management skills, working as part of a team, and meeting deadlines for the betterment of society.

WCCT, Tarbela2015 Matric

Punjab College of Science, Faisalabad2017 Intermediate

National University of Science and Technology, Islamabad2021 BE Electrical

21/06/2018 NPGCL GENCO III21/07/2018 Technical Internship where I worked on turbines. And learnt their operations.

ASP LAB SEECSJune 2019 August 2019 Technical Internship where I worked on different machine learning algorithims.

Electrical EngineeringPower System Analysis, Design and Protections, PSCAD,

ARM Cortex, Aurduino,MATLAB, Pspice, Multisim, Proteus, LabView, AutoCADElectrical Engineering

Software EngineeringC, C++, Pythn, Java, Java Script, HTML, CSS, PHP, Machine Learning

Communication Skill, Interpersonal Skills, Leadership Skills, HR ManagementManagement

- Bank Management System - Heart Rate Sensor - Travel Agency Management System- Taxi fare meter (time module) - Barrier Avoiding Robotic Car - Crops Price Analysis

Final Year Project:Demand Response based control of Building Cooling Units

ACM NUST(Treasurer | Sep 2020 to Present)NUST FITNESS CLUB(Mentor | Sep 2020 to present)NUST FITNESS CLUB(Treasurer | Sep 2019 to June 20)NUST BIOREACH SOCIETY(Team Audit |October 2018 to December 2019)IEEE SEECS(Team Finance |January 2019 to June 2019)NUST COMMUNITY SERVISES CLUBTeam(Logistics |October 2018 to December 2018)

- Finalist Cross Road Emerging Leader Program 2019

- OC member DevFest by GDG- Organizer Major League Hackathon NUST

MuhaMMad Khalid


MUHAMMAD [email protected]

https://www.linkedin.com/in/muhammad-ali-b0077219a/

An effective and confident student, who is also a self-starter with the dedication and motivationrequired to succeed in a busy technical department. Easy going by nature and able to get along withboth work colleagues and senior managers when providing technical support to daily operations oftechnical department. Presently looking to process a career by joining an exciting and ambitiousorganization that rewards ability and hard work.

NUST SEECS, H-12 Islamabad2021 BE Electrical

Punjab College of Science Blue Area Islamabad2017 F.sc

IMSB I-10/2 Islamabad2015 Matric

Aug 2020 MicrotechxJan 2021

This was a Multicloud internship program in which we worked on different cloudplatforms e.g. Azure, GCP and AWS.

ROMI Lab SEECS NUSTJun 2019 Aug 2019

We were a group of interns at ROMI Lab. We were given the task of operatingLego EV3 on ROS.

Management Interpersonal skills, Team work, Project Management

C++, Python, Assembly Language, MATLABProgramming

Simulation PSpice, ADS, Simulink, Wireshark, TinkerCAD

MS Azure, GCPCloud

Object Tracking using LPWANS, Reliability in UDP, Operating Lego (EV3) withROS, Q-Learning on ARM Cortex M-4, Arduino Radar, Looking at camera fromcriminas perspective.

1) Team Member at AWSCommunity Pakistan.2) Graphic designer at YouthInsight.3) Former graphic designer at SGASEECS4) Team Member at StartUp Grind2018.5) Former graphic designer at NPASNUST.

1) Quiz Competition Winner at PCSBlue Area Islamabad (2017).2) Organizer MTS'19 from YouthInsight.

1) Volunteer at Project MOHorganized by HHRD and YouthInsight (2019).2) Volunteer at Project Insaniyatorganized by Chadar Islamabad(2017).

Muhammad [email protected]

https://www.linkedin.com/in/muhammad-bilal-0b955a17b/

To obtain a challenging position in the prestigious world where accomplishments are rewarded withgreater responsibilities and career development and also to serve humanity through some kind ofinnovation. Polish my skills and used them for betterment of society.

Nishat High School2015 Matric

Kips College2017 Inter

National University of Science and Technology2021 Bachelor

Sep 2020 Pakistan Health MinistrySep 2020

Managed 10 teamsSupervised and kept track of team progressCompleted all deliverables in timely fashion

IEEE SEECSOct 2019 Apr 2020

Maintain amicable working environmentManage team of 5 personnelInterviewed and hired talented individuals

Technical Skill Programming (MATLAB,Python,C,C++)

Circuit Analysis and SolvingTechnical Skill

Technical Skill Embedded C, Verilog, Proteus

Communication skills, Leadership skills, Presenting skillsSoft Skills

The Clean Plate (Final Year Project)Self Obstacle avoiding Robot using FreeRTOSAutomatic License Plate RecognitionRF ID card lock system using STM32Digital Alarm Clock

Volunteered at Open House2017-18

Participated at Youth Forum 2018

Intern At Akhuwat Foundation

Project "Insaniyat"


Email Address Linkedln profile

EDUCATION

WORK EXPERIENCE

PROFESSIONAL & TECHNICAL SKILLS

ACADEMIC PROJECTS


[email protected]

My undergrad studies is mainly focused on Mobile Communication System, Digital SignalProcessing, Microwave and Antenna Engineering, Programming, Deep Learning and Data Science.My Projects mainly include Python Programming, Deep Learning, Application Development andSpeech Recognition so I am looking forward to pursue my post-graduation in one of the abovedomains.

NUST - SEECS2021 BEE

Adamjee Government Science College2017 FSC

Haq Foundation School2015 Matric

2020 DNN Based Hybrid Speech Recognition SystemPresent

I am currently working on my final year project which is the deep neural networkbased hybrid speech recognition which is able to differentiate Urdu and Englishlanguage using coded-mixing technique as well as able to do transcription.

Deep Learning Deep Learning Frameworks (TF , Pytorch , Fast.ai)

Kaldi, DeepSpeech, Google Speech to Text APISpeech Recognition

Antennas Antenna Designing and Analysis

C, C++ , Matlab, Python and its frameworksProgramming Lang

1. Bank Management and Library Management System using C++ and Qt toolkit2. Bluetooth motor controller and load divider using ARM CORTEX M43. Car Price Prediction Using Machine Learning4. Deep Learning Based Hybrid Speech Recognition System

Write Extra Curricular Activities Here

Director Finance Nust BioreachSocietyExecutive Finance Nust Fine ArtsClub

Muhammad Mustafa Umar [email protected]

www.linkedin.com/in/mustafa-umar-67b536167

I am a passionate engineering student seeking learning opportunities related to ElectricalEngineering. I am enthusiastic about robotics and embedded design and excited to get hands onexperience related to my degree.

SEECS, NUST-Electrical Engineering2021 Bachelors

APSACs2017 F.Sc

APSACs2015 Matric

Jan 21 NSTPPresent

Responsible for collaborating with team to plan and implement data transferusing IoT. Successfully implemented IoT messaging technique for project.Experience professional working environment.

Programming C/C++/Python/Matlab

Arduino/Raspberry Pi/ESP/APMMicrocontrllers

IoT MQTT

Punctuality/Adaptability/Self-motivationSoft

FINAL YEAR PROJECT-IOT BASED CROP MONITORING & IRRIGATIONMANAGEMENT SYSTEMOBSTACLE AVOIDANCE IN DRONESSOUND CLASSIFICATION USING CNNsHOME SECURITY & AUTOMATION SYSTEM

FREELANCINGIn summers, I use to freelancesmall-scale projects to gain fieldrelated experience and polish myskills.

NATIONAL WINNER FICS-NUST

REGIONL FINALIST MICROSOFTIMAGINE CUP

TEAM MEMBER NUSTENTREPRENEURS’ CLUB

VOLUNTEER COMMUNITYSERVICE


Sadia [email protected]

https://www.linkedin.com/in/sadia-asif-660302186/

Seeking a challenging position with a professional and work driven environment where I can utilize and apply my knowledge along with interpersonal and technical skills while fulfilling organizational goals

NUST Islamabad2021 BE Electrical Engineering With minor inj Computer Science

Leads College JPJ Gujrat2017 Intermediate

Govt. Islamia Girls High School , JPJ Gujrat2015 Matriculation

April 2020 SIGMA Lab in collaboration with TUKL R & D CenterMar 2020Worked on Funded Project by DAAD related to EEG for localization of deep learning-based algorithms and development of ESP 32 based hardware for live EEG data acquisitionMentoring Interns and assisting them in their project

ASP SEECS Lab in collaboration with Sci FiJune 2019 Sep 2020

Worked on Crop data Analysis Project using Machine Learning algorithms and on a collaborative project of SciFlair UK Ltd for handling the class imbalance problem of a dataset containing chest X-Rays of Covid patients for the prognosis of covid’19. Data annotation for fruits detection using MATLAB

Software PLC, ADS, Multisim, Xilinx,Labview, MATLAB,Visual Studio

ARM (TM4C123, STM32) , Arduino, ESP 32, FPGA, DACHardware

Languages Python, C/C++,Verilog, Assembly, HTML, CSS, PHP

Team Work, Leadership, Creativity, Research and AnalysisSoft Skills

EEG abnormality Detection using Deep learning Smart Attendance System using Face Recognition FreeRtos Based Windows Simulator Using Stm 32 FPGA based Smart Traffic Controller Crops Data Analysis using Machine Learning AlgorithmsCollison Detection Robotic Vehicle Using ARM Cotex TM4C123 ? Taxi fare Meter using digital logic circuits? Smart Heart Beat Monitoring using Arduino and pulse sensors and Arduino? Travelling Management System using Data structures in C++? Banking management system using C

Director Liaison at NUST character Building Society

Provincial Ambassador At YPEG Volunteer at Youth Insigh

Active member at Million Smiles

HCIA Certification in R & S

Distinction in Huawei ICT competition 2019Cross Roads Emerging Leader by Harvard Business School1st Position at National Level in YLMC

Director HR at Chadar.

Chair ASWAN at Association of Computing Machinery ACM

Director HR at TABA youth Force

Volunteer at Youth Insight/ USA Helping Hand

Project Member of UN Millennium

Sardar Hassnain Ali

[email protected]

https://www.linkedin.com/in/sardar-hassnain-ali-266a95209/

Seeking a good position to begin my career with in a high level professional environment. To fully

utilize my technical and interpersonal skills I have learnt in my bachelor's degree to get the desired

customer satisfaction and career growth.

Happy Day School System Peshawar2014 Matriculation

Edwardes College Peshawar.2016 Fsc-Pre eng

NUST-SEECS2021 BEE

Freelancing related to electrical engineering domains.

Embedded Verilog/VHDL/Xilinx/Free-RTOS

MATLABImage Processing

Programming C/C++/Python/Java

Communication Skills.Communication

-FYP in Digital Image Processing and Embedded Systems Design

-Cricket

-89.9% in matric

-85% in Fsc

-Insaniyat Project(2017)


Syed Momin Ali [email protected]

https://www.linkedin.com/in/momin-hashmi-9a7341168

A hard-working and passionate senior seeking a competitive Electrical engineer position. Myinterests and strengths include C/C++, FreeRTOS, embedded hardware/software development, andPCB designing. I want to exercise my existing skills for the success of your organization and readyto learn new things.

SEECS, NUST2021 BEE

Fauji Foundation College for boys, New Lalazar, RWP2017 FSC

Fauji Foundation College for boys, New Lalazar, RWP2015 Matric

15/6/2019 Research Assistant at SIGMA Lab, SEECS, NUST9/8/2020

Hardware development of highly precise ADC board to getdata from 8 channels simultaneously using esp32

Freelancer1/6/2020 Current

Working as a circuit designer, PCB designer and embeddedC coder on Freelancers.com, Fiverr and Upwork.

Embedded Design 5/5

5/5Free RTOS

C/C++ 5/5

5/5PCB Design

FYP- Developed 8 channel EEG PCB. Programmed the ADC through SPIinterface, collected data and applied Machine learning Algorithms to categorizebrain signals as normal or abnormalFreelance- Designed hardware, PCB and code for a box for $3607th semester- Obtained data from multiple sensors using FreeRTOS on STM32

Director Logistics at NUSTEntrepreneurs Club

Director Liaison at NUSTEntrepreneurs Club

Team Lead at IEEE SEECS

Football

Swimming

National finalist ICT competition2019 by Huawei

Prize winner at NaSCon 2019 byFAST

Prize winner at WSW 2016 by IST

Community service at FaujiFoundation hospital for a month

Volunteer work at project Chaddar

Volunteer work at project Insaniat

Email Address Linkedln profile

EDUCATION

WORK EXPERIENCE

PROFESSIONAL & TECHNICAL SKILLS

ACADEMIC PROJECTS

Tauqir [email protected]

www.linkedin.com/in/ tauqir-hassan-169100165

My undergrad studies is mainly focused on Embedded Systems , Digital System Design , Internet ofThings (IoT), Digital Signal Processing, Deep Learning.The projects that I worked on are based onthe amalgam of all these modules. Hence, post-graduation, I hope to build my career around theseaforementioned subjects.

NUST-SEECS2017 BS EE

APS ACS, HAMZA CAMP, RWP2015 HSSC

APS ACS, HAMZA CAMP, RWP2013 SSC

2020 TUKL-Deep Learning LabPresent

I am working on my final year project "HLS based Implementation of EpilepsyDetection using ANN Architecture on FPGA" at TUKL. Its objective is a real-timeimplementation of an epilepsy detector on a integrated circuit known as FPGA.

Embedded System Embedded C

Assembling LanguageEmbedded System

Deep Learning Deep Learning Frameworks

VerilogDigital Systems

1) HLS based Implementation of Epilepsy Detection using ANN Architecture onFPGA2) Reinforcement learning on ARM Cortex M-4 microcontroller3) Bluetooth Powered Multimeter based on STM32F4 & RTOS4) Unreal Engine based game design using OOP principles

- Organization of seminars throughthe platform of NCBS

- Article Writing

- Ecommerce

- Executive Admin Events

- Student Member at AWSCommunity Pakistan


Muhammad Usama MirzaEmail ID: [email protected]

LinkedIn ID: https://www.linkedin.com/in/usama-mirza-051b90184/

To secure a responsible career opportunity to expand my knowledge and skills

SEECS, NUST2021 BEE

Roots International School, Wah Cantt2017 A-Levels

Lahore Grammar School, Wah Cantt2015 O-Levels

1/6/2019 TUKL R&D, NUST1/9/2019Worked as a research intern to implement a Machine Learning Model on FPGAs to recognize handwritten digits.

Hatch-8 Incubation Programonal1/1/2021 Present

Worked as Project Management Intern to create and design project roadmap

Machine Learning Machine Learning Frameworks

C/C++, Python, MATLABProgramming

Software AutoCAD, Visual Studio, Keil

Microsoft OfficeSoft Skills

- Crop yield prediction using Computer Vision and Machine Learning- Generating Synthetic Data for Deep Learning- Audio Classification using Convolutional Neural Networks- Maze Solving Automobile- Survival based Video Game

- Video Game Development

- Chess

- Top in the World Distinction in O-Level Mathematics

- Best in three subjects in northern region in A-Levels

- Two silver and one bronze medal in International Kangaroo Mathematics Contest

- Took part in Project Insaniyat to provide aid to the poor

- Part of Organization Committee for Roots Olympiad

ZEERAK [email protected]

https://www.linkedin.com/in/zeerak-naveed/

I am a passionate and career-oriented individual seeking learning opportunities and exposure. I amenthusiastic about engineering and technology management, and want to add value to organization,create an impact and get hands on experience in the corporate sector.

SEECS-NUST Electrical Engineering2021 Bachelors

The City School (2As & 1B)2016 A Levels

The City School (5A*s & 4As)2014 O Levels

Feb 2021 National Science and Technology ParkPresent

Co-founded a startup which aims to provide smart agriculture to small-scalecommercial farmers.Attended multiple training workshops on product development.

Programming Python, C, C++, assembly language

PyTorch, TensorFlow, RasberryPiMachine learning

Management Financial management, design thinking

Team leadership, project managementManagement

FYP: IoT-based crop monitoring & irrigation management systemSound classification using convolutional neural networksGenerating synthetic data for deep learningResearch project on organization behaviorResearch project on international market entry strategies

Director finance NUST Media Club2019-20Deputy director finance NUSTOrientation 2019Team member NUST Olympiad2019Executive member NUSTEntrepreneur's Club 2018-19Organizing Committee MemberHONET-ICT Conference 2018

Winner FICS-NUST 2020Regional Finalist Microsoft ImagineCup 2020Best deputy director NUSTOrientation 2019

Participant Project Insaniyat


AHMED [email protected]

https://www.linkedin.com/in/ahmedusman1431/

To use my experience working with a diverse group of people to find innovative solutions toproblems that focus on making human lives easier and better.

National University of Sciences & Technology, Islamabad2021 B.Eng.

Mesaieed International School, Qatar2016 A Levels

Mesaieed International School, Qatar2015 IGCSEs

Jun 2018 Rehman MotorsJuly 2018

Understanding automobiles by studying their features, capabilities andcomparing them with competing models. Maintaining rapport with previouscustomers by suggesting trade-ins best suited for their needs.

Orientation of NUSTJuly 2019 Sep 2019

Led a team of 5 individuals to prepare Orientation Guide groups for theincoming freshman (~1100 students) and providing them with assistance beforeand during their orientation.

Team Work Worked with people of different cultural background

President of SEECS Farewell, Team Lead for Science BeeLeadership

Microprocessor Experience working with arduino and ARM Cortex M4

MS Office, MATLAB & Simulink, AutoCADSoftwares

• Micro-Hydro Power Generation Unit• Automated Colour Sorter• Automated Cricket Score Board• Automated Colour Sorter

President of SEECS Farewell 2020

NUST International Model UnitedNations where I was responsible ofgetting in touch with the foreigndelgations

NUST Science Society - Generatedthe highest revenue in the eventshistory from registrations and ticketsales.

Winner of QUESS Doubles TableTennis Tournament.

NCSC Blood Donation Drive

QAFCO Flower & Vegetable Show

Fund Collection for Project Insaniyatwhich is a community service projectfor the most vulnerable people ofour society.

Shoe box of Hope for the victims ofTyphoon Haiyan in the Philippines

ALEESHA AYYAZ [email protected]

https://www.linkedin.com/in/aleesha-ayyaz-220306152/

I am eager to improve my skills by appling the knowledge that I have acquired, practically.

NUST H-122017 BEE

Punjab College F-8/4 Islamabad.2016 F.Sc

I.C.G F-6/2 Islamabad2014 Matric

June ROMI Lab SEECSAugust

Interfacing ROS with Lego EV3 kits, along with other interns and projectmembers.

IPT Lab Seecs2020 Present

Quantifying the frequency offset in transmitting signals in LORA signaltransmission

HTML,CSS,PHP, JAVASCRIPT TENSOR FLOW.

AutoCAD MATLAB ENSP, Wireshark

HURDLE DETECTOR USING LEGO,TWITTER SENTIMENTANALYSIS,DELIBERATE LITERATE,VOICE CONTROLLED ROBOTICWHEELCHAIR (ARM CORTEX M4),SHORTEST PATH FINDING USINGDIJKSTRA'S ALGO,MATRIX SOLVER,LIBRARY MANAGEMENT SYSTEM.

Content Writing, Learning newlanguage, Reading, Painting,Calligraphy

2014-2016 full merit scholarship forabove 95% marks.

Part of Insaniyat Project held atSeecs Nust.


AMMAR [email protected]

www.linkedin.com/in/ammar-ahmed-a74b97177

A zealous, hardworking and flexible individual. A fast learner,who uses creative approach and tries to develop innovativetechnological solutions to the existing problems of humankind.Looking for challenges and growth.

National University of Sciences and Technology2021 Bachelors in Electrical Engineering

Army Public School and College, Jhelum2017 HSSC

Farabi Foundation School, Dina2015 SSC

From OrganizationTo


OrganizationFrom To


Programming C/C++

Pspice, MultisimCircuit Simulation

Design AutoCAD, Graphic Designing

MATLAB, Verilog HDL, Web Development, PCB Designing,Other

A cost effective fault localization device for power distribution networks based on Electromagnetic time reversal, Home Automation System using ARM Cortex M4, Tic Tac Toe using Logic Gates only, 3D Map of NUST using AutoCAD, Bus Management System using concepts of Object Oriented programming, Unified Covid Front ( COVID-19 awareness website ) , Oxygen ( a blogging website)

Engineering: Undergraduate & Masters Asia Virtual Experience ProgramMember AWS Community PakistanUfone Master Class Series

Project Insaniat: A Community Service Project

Anwar [email protected]

www.linkedin.com/in/anwar-sarwar

A highly motivated, organized and hard working individual looking for a responsible careeropportunity to leverage my training and skills, while expanding my practical experience andcontributing significantly towards achieving company goals.

National Univeristy of Sciences and Technology, Islamabad2021 Bachelors

Government College University(GCU), Lahore2017 FSc

Divisional Public School, Burewala2015 Matric

2020 Teacher Assistent to Professor Umair Sajid Hashmi2021

Worked as a Teaching Assistant for the courses of Signal & Systems(EE-232)and Communication Systems(EE-353) at SEECS NUST. Assisted in executionand maintenance of course curriculums. Conducted assignments and quizzes.

MATLAB Signal Analysis, Simulink, LTI systems, Fourier Analysis

Model Training and testing in Python/Colab and MATLABMachine Learning

Circuit Simulations Circuit simulations on ADS, Multisim/PSpice and LabVIEW

Excellent teamwork, good administrator and inspiring leaderManagement

- 5G-IOT based Industrial Automation using smart user- clustering and NOMA - Synthetic Text Dataset Generation- Smart Traffic Signal System using TM4C123 Microprocessor

- Badminton- Photography- Book reading- Web Development

- Completed an online certificationon Machine Learning by StanfordUniversity offered through Coursera

- Completed a course on WebDevelepment from SEECS NUST

I was a part of different drives andcampaigns some of them are:- Al Mehmood helping hands: a partof the NGO doing work for the poorand poverty stricken people. - Project Insaaniyat: it was amultiday fund raising campaign forthe poor and destitute people ofIslamabad- SOS Village visits: these were aseries of visits to SOS villages toraise funds for such instituions.


Muhammad Ahmed [email protected]

https://www.linkedin.com/in/muhammad-ahmed-khan-784ba1150/

I see myself as either a plant engineer working at the plant of an industry or as manager of supplychain at any corporate office.


Nixor College2016 A levels

St. Paul's English High School, Karachi.2014 O levels

July 2019 Feroze1888 Mills LimitedAug 2019

Was a plant engineering intern. Was responsible to complete a project ofdevelopment of ground earth pit resistance monitoring system. Was alsoresponsible to learn the working of the department of plant engineering.

Supply Line ExpressSep 2018 Jan 2019

Was responsible to manage the supply chain of a private start up at NUST.

Computers MS Office

Communication SkillsSoft Skills

Software C++

MatlabSoftware

1. Real Time Internet Traffic Monitoring and Control using DPI and ML.2. Automated Industrial Load Control using micro-controller ARM Cortex.3. Bank management system using C++ and OOP.

1. Debating.

2. Horse Riding.

1. Best Intern Award at Feroze1888Mills.

2. Won Mathathon in a certaincategory at NUST.

1. The Citizens FoundationInternship.

2. Volunteer at Dar-ul-Sukoon.


linkedin.com/in/ali-shan-a60bab150/

Efficient use and transmission of electric power.High voltage direct current (HVDC) implementation throughout the country.Automation in daily life tasks and promoting control systems.

The Educators2014 SSC

Fauji Foundation College for Boys2016 HSSC

SEECS, NUST2021 BEE

2019 Active Tours Pakistan-- To manage accomodations and transport for tourists- Creating posters, logos and videos for the company

OrganizationFrom To


Transmission Identification and correction of faults, improving efficiency

Identification and correction of faults, improving efficiencyGeneration

Controls Steady state analysis for conrol systems

Industrial Process Control ManagementControls

- Obstacle avoiding card - ARM Cortex-M2- Parity generator and checher - Digital Logic Design- Trie (Tree data structure) serves as autocomplete - C++- Home automation prototype - Arduino- Automated efficient tomato growth

Video EditingGraphic DesigningBlockchain (cryptocurrency)

'Chadar' initiativePRCS

Shan


Ali Zain Ul [email protected]

Make myself aquanted with different Engineering tools and work for the betterment of the societyand mankind.

APS Gujranwala Cantt2014 SSC

APS Ord Rd Rwp Cantt2016 HSSC

SEECS NUST2021 BEE

2017 Project Insaniyat2017

Human Resource Management

NUST Dramatics Club2018 2018

Human Resource Management

Electrical Pspice/Proteus/Visual Studio

Interpersonal skillsCommunication

Problem Solving Problem solving / Algorithms

Presentation SkillsCommunication

John Conway’s Game Of Life in C language

Detecting Vehicle Movement Using Sensors

RFID Based Employee Attendance System

E-GamingActingSingingDebatetable TennisMovies And TV-ShowsTech And Gadgets

Top 3 in various urdu debtingcompetitions90% marks in SSCScholarship in HSSC-I

HR team for Project Insaniyat

FULL NAMEEmail [email protected]

LinkedIn IDhttps://www.linkedin.com/in/rao-waqas-ali-83615b137

I am currently enrolled in Bachelors of Electrical Engineering at NUST, I am very motivated to learn skills and methods and everything that matters to be a better engineer and eventually a true professional.

Bachelors in Electrical Engineering2021 Bachelors in Electrical Engineering

Punjab Group of Colleges Bhakkar Campus2016 HSSC

District Public School Bhakkar2014 SSC

06/2018 Akhuwat Foundation08/2018Community Service

FESCO8/2020 10/2020

Protection and Instrumentation intern

Circuit Simulation Pspice, Multisim

MATLABSignal Processing

Soft Skills Adaptability, Communication Skills

LabView, AutoCADOther skills

A cost effective fault localization device for power distribution networks based on Electromagnetic time reversal, 3D Map of NUST using AutoCAD, Bus Management System using concepts of Object Oriented programming

House Captain of SEECS Cricket TeamSocial Media executive- Nust Literary Circle

Project Insaniat

RaO WaQaS


Syed Shaharyaar [email protected]

https://www.linkedin.com/in/syed-shaharyaar-hussain-1b649979/

I want to work on intersection of Emerging Commuication technology and Artificial Intelligence.

Forman Christian College2017 F.Sc

National University of Sciences and Technology2021 BEE

InstituteYear Degree

Jul, 2018 Akhuwat MicrofinanceAug,2018

Composed success stories on Akhuwat Micro-finance about the impact of on SMEs and society due to its interest-free loans. Moreover, I traveled with Akhuwat team for clothes disbursement in villages.

Adaptive Signal Processing LabJul, 2020 Sep,2020

I did internship at Adaptive Signal Processing Lab, SEECS-NUST, where I performed Comparative Analysis of Oranges-Dataset classification using deep learning, transfer learning and image compression techniques.

EE & CS MATLAB/SIMULINK

Python & AnacondaEE & CS

EE & CS Data Anlysis

Embedded System DeisgnEE

1) Harvey Hurricane Analysis Using MATLAB2) Simulating Switching Diversity and channel gains modeling in MATLAB3) Transmitter-Reciever audio channel modeling with AWGN in SIMULINK4) Discrete Tone Generator using Tiva Series Cortex M4 development board5) PGMA Image steganographer in C language

Graphic Designer at ACM Chapter NUST

Graphic Designer at Youth Entrepreneurship Society

Volunteered for OC in Google DevFest'18

P. Carter Speers Gold Medalist from Forman Christian College, Lahore

Volunteered for Project Insaniyat

Talha Mehboob [email protected]

https://www.linkedin.com/in/talha-mehboob

Ingenious and determined Electrical Engineer with two years of experience as a Research Assitant.Managed tasks related to development of Machine Learning Models and Designing & Developmentof Hardware. Immediate goal is to secure a position at a company where I can continue to grow andimprove myself both personally and professionally.

National University of Sciences & Technology, Islamabad 2021 Bachelors

Fauji Foundation College for Boys, New Lalazaar Rawalpindi 2017 FSc

Fauji Foundation Model School, Gujar Khan 2015 Matriculation

01/2020 TUKL-NUST Research Development CenterCurrent

Research Assistant - My responsibilities include managing all the tasks relatedto development of Machine Learning models and deployment of ML models onEmbedded Devices

Ai-Lounge06/2020 Current

Junior Instructor & Editor - My duties are to Organize Workshops, AI (ArtificialIntelligence) Camps & Sessions, and manage the content to be delivered, onsocial media and on Official Website.

Team Work Research & Management teams - Learnt Collaboration

Team Leader of multiple Research projects & Teams Leadership

Machine Learning Medical Imaging, Python, Tensorflow, Keras, PyTorch

FreeRTOS, KEIL Development Environment, ADSEmbedded Devices

- Analysis of Oral Squamous Cells for detection of Cancer using Deep Learning.- Deployment of ML on Edge Devices (Jetson Nano & Jetson TX2)- Low Cost Scanner & Computational Pathology- Dimmable LED Driver with Inrush Current Control- COVID-19 (Website) (http://covid.byethost31.com/19)- Synthetic Text Dataset Generation

* Organizer - 3rd IAPR SummerSchool on Document Analysis(Deep Learning Applications).

* Organizer & Instructor - Workshopon Artificial Intelligence on EdgeDevices

* Guest speaker at IEEE-SEECS toshare my thoughts on Significanceof MATLAB in Machine Learning &Computer Vision domain to anaudience of 160+ people.

* Scholarship From GeneralManager Education FaujiFoundation for being high achieverin intermediate.

* Certificate of Appreciation byPrincipal SEECS for upholdingacademic excellence.

* Federal Board High AchieversScholarship

* Taught and interacted with theyoung minds of High School aboutthe technological advancements

* Being part of Community servicedrives, e.g. 'Project Insaaniyat',collecting money to help people inneed of it.

* Visits to Orphened Child CharityHouses such as SOS Village to helpraising them funds for Children care.


Shaheer Mehmood [email protected]

https://www.linkedin.com/in/shaheer-mehmood-06aba2150/

A voracious learner irrespective of any domain. A scenario-oriented individual ready to face newchallenges with innovative approach. Eager to put my excellent communication, management,analytical, and technical abilities to use in a professional organization


NUST - NBS2021 BBA minor

FG - Sir Syed College, The Mall, Rwp Cant2017 Pre-Eng

July 2020 NESCOMFeb 2021

Investigated new autonomous ways of channel sensing for 5G waveforms usingdeep learning to discover channel states, enabling transmitter adaptation tomaximize link performance.

NRTCJuly 2018 Aug 2018

Former intern at NRTC, Haripur Hazara. Worked on a subproject ofmanufacture of SDR part using the 3D printing techniques. Explored themanufacture and supply line of R&D, climate testing etc.

Soft Skills MS Office

Leadership, Time Management, Risk AssessmentSoft Skills

Technical Digital Marketing

MATLAB, Pytorch, PythonTechnical

Real Time Face Mask Detector using CNN on pytorchBluetooth car via Arduino UnoTaxi Meter Fare Calculator (Digital Logic Design)Hand Gestured Car via Arm Cortex M4Pose Detection and estimation on Cambridge

Mentor - ICAI ' 21Campus Ambassador - L'OrealJoint Secretary - NUST ScienceSocietyConvener - National Science Bee'19Director ER - FICS'20Director SOCs - ON'19

Best Executive - Admin Events NSSTop 10 - ISMOTop 50 - IKMCWinner, Hot Air Balloon - IST WSW

Intern - WWFMentor - ASAS InternationalSchoolsTutor - Step Ahead Welfare Society

HADI [email protected]

https://www.linkedin.com/in/hadiaskari67/

I want to work in a Machine Learning/Artificial Intelligence role. I have had experience in integratingML withComputer Vision, NLP, Wireless Communication and Image Processing. I want to build my skills

and workin challenging roles..

NUST H-12 - CGPA 3.652021 BEE

Karachi Grammar School - Grades 3A*s 1A2017 A Levels

Habib Public School - Grades 12A*s2015 O Levels

May 2017 TUKL Research and Development CenterJune 2021

Responsible for creating and implementing Machine Learning models forsemantic slum mapping, aerial object detection, and 5G waveform optimization.

Advanced Machine Learning Teacher's AssistantAug 2020 June 2021

Created assignments in Pytorch, Keras, and Tensorflow for Graduate Studentson topics such as CNNs, RNNs, GANs and Reinforcement Learning.

Machine Learning Python, Keras, Tensorflow, Pytorch, R.

Python, C++, C.Coding

Web Engineering PHP, jQuery, Javascript, SQL, HTML, CSS

MATLAB, LabVIEW, ADS, Proteus, Verilog, KEIL, PSPICE.Electrical

Waveform Optimization using Neural Network based Real-Time Sensing in 5GData Links.Image Pose Regression using CNNs.Understanding the limitations of SLAM and ORB-SLAM scene localizationmethods in non-standard datasets.Facial Mask Detector using Pytorch.Slums Mapping Semantic Segmentation.Aerial Object Detection.

Member of Parliamentary DebatesTeam, NUST Debating Society.Director Registrations, NUSTOlympiad 2019.Team Lead IGET, AIESEC in NUST2018-19.

GRE 326 (163Q, 163V, 4.5AWA)TOEFL 117 (30R, 28L, 29S, 30W)SAT1 1510SAT2 (Math, Chem, Phys) 2400National Finalist, Huawei ICTCompetition 2020.Finalist, National Physics TalentContest.Gold Medalist, Kangaroo MathsCompetitionWinner, SUPARCO Space Quiz

Intern at National Institute of ChildHealth.Intern at AKU Mental HealthSeminar


Haniya Akhtar [email protected]

https://www.linkedin.com/in/haniya-anjum-876b411a1/

I am self-motivated and responsible electrical engineering student of 4th year at NUST (NationalUniversity of Science and Technology). My studies have provided me with a strong foundation for aprofessional career and having made projects across a range of domains, I am adaptable to work inany subdomain of electrical engineering and look forward to a career that will develop both technicaland managerial skills.

National University of Sciences and Technology (NUST)2021 BEE

Punjab Group of Colleges2017 F.Sc.

The City School2015 O-Level

07/2018 The Akhuwat Foundation08/2018

- Acted as liaison between the foundation and other institutions to promote thecause.- Participated in the collection and distribution of clothes.

OrganizationFrom To


Programming C, C++, Python, Matlab, MASM, Excel VBA

PSpice, Multisim, ProteusElectronics

Machine Learning Tensorflow, PyTorch, Keras

Word, Powerpoint, ExcelMicrosoft Office

“Complexotron” - A simulation of a machine language using object-orientedprogramming in C++ with a user-friendly interface and security features.Solar Powered Street Light - A streetlight with an automated solar powered UPSimplemented using the ARM Cortex M4.Dual Chamber Heart Pacemaker - An implementation in FreeRTOS.

- Won in the ‘Class 7’ category ofthe ‘Mathathon’ competition toencourage activity-based learningfor mathematics (February 2018)- Was Executive Décor for theSEECS Declamation Chapter (SDC)from September 2018 to September2019.

Received the Chief Minister’s Awardfor securing 3rd position in MultanBoard (April 2018).

Project Insaniyat - Raisedawareness and collected donationsfor a special education school inIslamabad for chiledren withcerebral palsy.

HASHAM [email protected]

https://www.linkedin.com/in/hasham-mukhtar-81aba1150/

Extremely motivated to constantly develop my skills and grow professionally.I am confident in my ability to come up with interesting ideas for emergingtrends across the globe.

Military College Murree2014 Matric

Military College Murree2016 FSc.

National University of Sciences and Technology,Islamabad2021 Electrical

Jun-19 PAKISTAN TELECOMMUNICATION COMPANY LTD.July-19

Worked on the Fiber Optical Networking Infrastructure laid by thePTCL. Worked on Networking, Routing , Switching of Core Optical FiberNetworking System for Domestic and Long-Haul Communication.

ARCTAN ENGINEERING SOLUTIONS PVT. LTDAug-20 Sept-20

Worked on a Smart Watch that was basically a Military Project. Ittracks the Soldiers and Officers that are on Operation or Border wherethere are Weak Signals and normal GPS using GSM doesn't work.

Embedded System ARM Cortex M4, Assembly x8086, Embedded C

Tensor Flow and PyTorch. Google Collab, JupyterMachine Learning

Progarmming C/C++, Python, Matlab, Data Structures in C++, Verilog

Proteus, Pspice, Labview, Multisim, LogixPro,WiresharkElectrical

1. Solar Powered Street Light System with ARM Cortex Microcontrollers.2. Spell Checker Dictionary With Data Structures. 3. Design Model of NUST withAutoCAD software. 4. 4-bit Binary Calculator using Digital Logic design. 5.Mobile Charging Device. 6. Bank Managment System In C. 7. Breakout Clonewith C++ and SFML.

CricketHockeyBasketballNetflixGlobal Affairs

President MLH Local Hack Day.Organized the Pakistan's BiggestDevFest in Islamabad incollaborations with GoogleDevelopers Group Cloud andIslamabad,GitHub, Microsoft andTelenor. Cadet Ambassador toPakistan in Herman Loose Trophy,Colombo Srilanka.

1. World Wild Life Federation-Worked on a development project-named as "Energizing the Future"an Advocacy Campaign aimed toreplace non-renewable sources ofenergy with renewable sources.

2. Project Insaniyat- A communityservice initiative project aimed atconducting an on campus donationdrive for the children effected withCerberal Palsy


IZZA [email protected]

https://www.linkedin.com/in/izza-hashmi-83506a172/

Currently the student of electrical engineering, eager to make the positive change in her life and the society by adding value to them, through the knowledge of electrical engineering using technical and soft skills.

NUST,Islamabad2021 BE Electrical

Punjab College F- 8/4 Islamabad2017 FSc

ICG F-6/2, Islamabad2015 Matric

From OrganizationTo


OrganizationFrom To


RF Energy ADS, HFSS

Circuit Design for microcontroller, Proteus, MikroC proEmbedded System

Circuit Design Hardware Electrical Circuit Design, PSpice, Multisim

Resilience, Responsible and Self motivatedSoft Skills

Final Year Project: Rectenna Design for RF wireless power transfer applicationsSemester Projects: Water Level Indicator -- in microprocessor Aqua Lock -- in Digital Logic Design

1) Animated Video on Powtoon for final year project2) Animated and well designed academic presentation on prezi, an online software3) Poster designing of final year project on canva4) Exercise

Current CGPA = 3.21(out of highest 4)Achevied 91% in FSc and 93% in matric

Participated in Project Insaniayat17 held at NUST, Islamabad

Muhammad Haris Naveed

[email protected]

https://www.linkedin.com/in/harisnaveed/

Final year electrical engineering student looking to get practical exposure in engineering and non -

engineering domains. My diverse work experience and achievements are proof of my

growth-oriented mindset, ability to work with others, a flair for problem solving, and creativity.

SEECS - NUST2021 BEE

Bahria College2017 HSSC

HITEC2015 SSC

08-2019 SkyElectric Pvt. Ltd09-2019

Machine Learning Intern

- Implemented a proposed concept to predict PV produced from sky-images

using convolutional neural networks.

Spectra Magazine07-2018 09-2018

Utilized exceptional writing, editing and proofreading skills to produce engaging

and error-free content.

Engineering MATLAB, PSpice

Python, R, PandasProgramming

General Teamwork, Conflict Resolution, MS Office

Automatic Traffic Intersection Controller on ARM Cortex M4 (Microprocessors)

Are housing prices in university towns less affected by recession than

normal towns? (Data Analysis and Statistics)

Director Publications, NUST

Olympiad 2019.

Social Media Manager, SGA -

SEECS.

Semi-Finalist, Unilever Talent Hunt

2020

Finalist, FICS 2020

Team Lead, Project Insaniyat

Eco - Intern, World Wildlife Fund


FULL NAME: Muhammad Usamah Shahid [email protected]

https://www.linkedin.com/in/muhammad-usamah-shahid-9b124a1b2/

Stay steadfast in learning and acquiring new skills as I strive to fulfill my responsibilities and contribute to the growth and success of the organization.

Keen interest in Artificial Intelligence and Game Development.

SEECS, NUST2021 BEE

Lahore Grammar School Johar Town2017 A Levels

Lahore Grammar School EME2015 O Levels

21/07/20 Sedenius Technologies21/09/20Schematic and PCB design for a CAN-based LED dimmer using Eagle and Arduino Micro

Sigma Lab, SEECS10/06/19 9/08/19

Research internship related to Deep learning, Computer Vision and Image Processing. Worked on Gaze Tracking project

Programming C/C++ (OpenGL), Python, JavaScript (HTML/CSS)

Eagle, ADS, ProteusCircuit Design

Microcontrollers Arduino, Raspberry Pi, ARM launchpads

Technical and Soft SkillsField

Smart EEG classifier for abnormality detection3D Cricket GameMaze SolverRobotic Color SorterFreeRTOS based Windows Simulator

Director Parliamentary Debates (NUST Debating Society)

Director Logistics (NUST Robotics Society)

Deputy Director Finance (TEDx NUST 2019)

Wiinner MTUDC 2015 (LGS ModelTown)Runners up Shahjiwana Urdu BritishParliamentary Debates 2016 (UCLLahore)8th all over Pakistan IKMC 2014Winner Inter-School EnglishParliamentary Debates (2013,2012)

Book Donation Drive for a newlibrary in TCF Lahore

Civic sense awarenesspresentations and seminar in publicschools

Muhammad Zeeshan [email protected]

linkedin.com/in/mzeeshankaramat

Passionate, Flexible, and Goal-oriented person who is determined to work with an organization,which provides opportunities for professional as well as personal development. I want to practicallyexplore my potential to provide the best services to the organization

National University of Science and Technology2021 BEE

Pakturk International College2017 HSSC

Fauji Foundation Model School2015 SSC

Aug 20 Ieng GroupDec 20

-Built a Security System for Telecommunication sites-Integrated AI with embedded system-Lead the installation team to install product on sites for testing

Sedenius Technology Pvt LtdJune 20 Aug 20

-Explored Embedded Systems research aspects of Self Driving Cars-Worked on designing of ”RC Autonomous Car”-Developed schematics and PCB design for ”RC Autonomous Car” in EAGLE

Languages C/C++,Python, JavaScript, HTML, XML, PHP, Verilog HDL

MATLAB, AutoCAD, Proteus, Eagle, KEIL, IAR embeddedDeveloper Tools

Hardware Armcortex M4, Arduino, Esp, GSM module, stepper motor

Adabtibility, Time Management, Project ManagementSoft Skills

-Low Cost Whole Slide Image Scanner with Deeplearning Applications-AI based BaseStation Security System-FreeRTOS based Home Automation and Security System-Voice Controlled Wheel Chair using Arm Cortex MCUs-Line Following and Obstacle Avoiding Robot

General Secretary Youth InsightDirector Finance NECDirector Finance SEECS Farewell19Deputy Director Finance NACTeam Member Finance OrientationTeam Member HR TABATeam Member Admin Events NLCTeam Member Marketing YouthImpact

-Among the first batch of NVIDIAcertified AI Jetson specialists in theworld-Best Delegate Award at WildernessBased Conference ”Markhor”-Full Merit Scholarship at PakturkCollege

-Volunteer at Helping Hands-Volunteer at Alkhidmat Foundation-Volunteer Taba Youth Club Nust



https://www.linkedin.com/in/muhammadahmad-05aba2150/

Looking forward to a position where I can fully utilize my training and skills while making asignificant contribution to the success of the company. The long-term goal is to develop my ownenterprise focused on sustainability and work towards UN's sustainability goals.

National University of Sciences and Technology (SEECS)2021 BE EE

Punjab College of Science2017 HSSC

Al Faisal Grammar High School, Faisalabad2015 SSC

July, 18 Northern Power Generation Company, GENCO IIIAug, 18

Worked as an intern on gas turbines, boilers, generators, HV electric grids,steam power production, and CT/PT. Researched on how to reduce lines lossesand improve the efficiency of relays.

Pakistan Telecommunication Company LimitedJun, 19 Jul, 19

Worked on the Fiber Optical Networking Infrastructure laid by thePTCL. Worked on Networking, Routing , Switching of Core Optical FiberNetworking System for Domestic and Long-Haul Communication.

Microcontrollers ARM CORTEX M4, Arduino, ESP 32

C/C++, Python, Matlab, Data Structures in C++, VerilogProgarmming

Simulation Software Proteus, Pspice, Labview, Multisim, PSCAD

Link Building, Content Marketing, On-Page SEOSEO

• English alphabets to Braille Coverter | Digital Logic Design |• Precision Stepper Motor Control | ARM CORTEX M4 Tiva |• Demand Response Based Control of AC using Model Predictive Control | ESP32/Android Studio/MPC/Python/MATLAB |

• Treasurer | IEEE-SEECS |

• JS to Tresurer | Nust BioreachSociety |

• Admin Events | Nust RoboticsClub |

• Admin Events | SGA |

• E-Gaming and Cricket

• NUST High Achiever's Award, 18'

• Top Rated Freelancer on Upwork

• Participant of Harvard CrossroadsEmerging Leaders Program (Dubai)

• Team prototype | Dubai FutureAccelerators |

• Team Lead for a fundraising eventfor specialized toys for a CerebralPalsy ward.

• Worked with Akhuwat Foundationto provide clothes andQarz-e-Hasaana to the deserving.

• Ambassodor for Qalam Program

Mashhood Ahmad [email protected]

https://www.linkedin.com/in/mashhood-ahmad-qureshi-76b508184/

Looking for learning opportunities.

NUST-SEECS, Islamabad2021 BS Electrical Engineering

Punjab Board, Multan2016 HSSC

Punjab Board, Multan2014 SSC

07/2018 Akhuwat Foundation, Multan08/2018

Collection and distribution of funds among poor - Internship

Pepsi Shamim & Company (PVT) LTD, Multan06/2018 07/2018

Practical Training at (PC&IS) - Internship

Softwares Matlab,Proteus, AutoCad, MS Office, Pspice, VisualStudio

C,C++, JAVA, 8086 AssemblyLanguages

Professional Skills Multitasking,Problem Solving,Smart Working

- Digital Multi-meter using ARM CORTEX- 4-Bit Magnitude Comparator using Digital Logic Design- Design and drafting of the ground map and buildings of NUST using autoCad

- Freelancing- Event Organizing- Cricket

-Volunteer Peace ConferenceParticipant of Pakistan’s biggestpeace initiative Volunteer PeaceConference10/2019-Award from IPO Pakistan and USEmbassy Slogan Competition04/2019

-Mall of Humanity-YouthInsight,Islamabad(07/2019)-Volunteer Work SOS Village,Islamabad(02/2018)-Project Insaniyat-Al-Farabi SpecialEducation Center, G-8 Islamabad(10/2017)


Moazama [email protected]

https://www.linkedin.com/in/moazama-irfan-34aa22169

My goal is to learn as much as possible and work in the field of RF and embedded and combine my knowledge of both fields to make innovations. I want to work at such a place where I can use my problem solving and analytical skills to solve challenging problems. I am a deadline-oriented person and want hands-on experience by working in an emerging industry.

National University of Sciences and Technology (NUST)2021 BS EE

Lahore College for Women and University (LCWU)2017 FSc

Ala ud Din School, Lahore2015 Matriculation

Aug 2020 MDI Lab, RIMMS, NUST2021Design of FSS for FYP, Antenna fabrication and testing.

Brainly Website2017 2019

Freelancing tasks, Solving problems for solution manuals and other content like that.

Software CST, AutoCad, LabView, Proteus, Xilinx, PSpice, Multisim

C/C++, MATLAB, Python, Verilog HDL, Arduino, MASMProgramming

Hardware PCB design, Antenna Design and fabrication, Soldering

ARM, Arduino, ESP8266, FPGABoards

Design and Analysis of Conformal Frequency Selective Surface (FSS) for Radome ApplicationsHome Automation System by using ARMDual Chamber Heart Pacemaker by using FPGAImage Segmentation by using K-means Algorithm3D modeling of NUST by using AutoCAD

Painting and Sketching

Badminton

RPG and Strategy games

Socializing

Top 20 finalist for International Mathematical Olympiad Training Camp

Summer Internship at Akhuwat Foundation (2018)

Fund raising campaign for Insanniyat Project

Clothes Collection for Street Store (TABA)

MUBASHRA [email protected]

https://www.linkedin.com/in/mubashra-zareen-0a1963150/

I want to persue my career as an electrical engineer to use all my technical and soft skills which ihave learnt in 4 years at Nust. I want to work in an environment where i can apply my knowlege ofmy field, and can gain some useful expeience.

SEECS, NUST2021 Electrical Engineering(cgpa3.37)

Chanab School and College, f-8/4,Islamabad2016 HSSC

Al Qamar Grammer Higher Sec. School, Isa khel.2014 SSC

Jun 2019 ROMILab, SEECSaug 2019

Interfacing Ros with EV3 Lego Robot. it let Lego robot to be used as a hurdleDetector.

Advance Learning School, IslamabadJul 2018 Aug 2018

Teaching students of grade 9 and 10th.

Technical C++,C

Matlab, Pspice, PsCadTechnaical

Soft Communication skills(Eng,Urdu)

LogixPro (PLC)Technical

Finding Shortest Path between two points using Dijkstra's logic.it finds theshortest distance between two cities.Smart Home Automation using ARM Cortex M-4.Library Management System using C++.

Book Reading.Cooking.Photography.

Got 1st position in 9th grade inTehsil.Attended a workshop on Lego Robotin SEECS.

i was part of a project named'Insaniat' in which we visited aspecial kids school with gifts, andspent a day there.


Muhammad Hamza [email protected]

https://www.linkedin.com/in/muhammad-hamza-siddique-2aa718173

To implement enginneering knowledge in modeling solutions of real llife problems and get hands on experience in practical world of technology.

SEECS,NUST,H-12 Islamabad Pakistan2021 BEng.

PAKTURK International College Islamabad.2017 HSSC

IMCB F-8/4 Islamabad2015 SSC

June 2020 NESCOMAug 2020Worked on project "DRFM Radar Implementaion on FPGA"Amalgumation of DSP and Embedded systems knowlwdge to achieve desired objective.

Iengeering GroupJuly 2020 Mar 2021

Worked on project "Base Station Security System", created datasets at BTS sites in Pakistan for AI model. Implemented MobileNet classification model on NVIDIA Jetson Nano. Integrated AI system with GPS module and IP camera.

Programming C/C++, Ladder,Python, HTML/CSS,Javascript

FPGA, Arm CotexEmbedded

Softwares MATLAB, Simulink,Quatus,EAGLE,Visual Studio,AutoCad

Lead of several tecnical and social projectsManagement

1. Integration of Robot Oprerating System ROS on Lego Kits.2. System manager on RTOS3. Barcode Decoder using Computer Vision and Image Processing4. Wireless Charger5. Autonomous path tracking robot

1. Team member ASWAN ACM.2. Director Associates Teams Youth Insight.3. Organize ACM Hackathon.4. Member Organization committee of Intl HONET conference.5. Member of SEECS Orienation committee 2019.6. Member Scial media team in Youth Insight.

1. Fellowhip Holder of National Enginnering and Scientific Commision (NESCOM).2.Became Director Associates in Youth Insight.3. Ambsador intl HONET Conference4.Project Lead and Manager for ieng. project.

1) Offical Ambassador of Helping Hands USA2) Co-led community service program "Meet the Seniors", aimed at carrer counselling of High School students.3) Led community service project "Mall of Humanity", to distribute cloths among the needy people in backward areas of Rawalpindi.4) Member ASWAN (ACM Welfare Chapter)


linkedin.com/in/muhammad-huzaifa-953b81150

instituteyear degree

From 03-2020 To 05-2020 Organization SuperTeacherContent Creator at SuperTeacher• Created data of 1000 MCQs of Physics entry test• More than 2500 students benefit from this

• Learned to understand supervisor demand and meet the deadlines

Programming

ee Software

general Software

Python, C,C++ programmingMaTlaB, labVieW, autoCad, Proteus

MS Office

Communication Skills, leadership skills, networkingSoft Skill

Gesture to Speech for mute person (FYP)

• deputy director at nuST BioReach Society

• executive member at honet iCT islamabad

• executive speaker at SeeCS declamation Club

• executive admin event member at nuST leadership society here

• Teaches students of underprivilege area at The Citizen Foundation

Determination is all it takes to reach the desire destiny. I am a determine person who believes in himself. My long-term goal is to secure a responsible job/internship to completely utilize my training and skills, whereas creating a major contribution to the success of the organization.

Electrical Engineer

University of Science and Technology2017-21 BSc ee

instituteyear degree Punjab College2015-17 FSc

instituteyear degree Sir Syed Cambridge School2013-15 Matric

Obstacle Avoiding CarIOT based sensor detection Tic Tac Toe game on Python

From 03-2019 To 04-2019 Organization The Citizen FoundationTeam Lead at The Citizen Foundation • Teach the students of underprivileged area through different activities• Students showed significant improvement in speaking, confidence and class participation

• Lead the team of 12 teachers from different background. Learned leadership skills, effective communication skills and time management.

• Volunteer at Share the happiness (Ramzan Special) where we distributed food among poor's at PiMS

• Volunteer Project “insaniyat” where we collect funds and bought books and toys for orphans


FULL NAME: Muhammad Qasim NoorEmail ID: [email protected]

LinkedIn ID: https://www.linkedin.com/in/muhammad-qasim-n-49a282130/

Driven, Motivated and Disciplined. Electrical Engineering major (3.76 GPA) currently attending National University of Sciences and Technology, with 1+ years of work experience. Aiming to leverage a proven knowledge of power systems, control systems, distribution processes, quality and safety compliance skills to successfully fill the Electrical Engineer role at your company. Frequently praised as adaptable by my peers, I can be relied upon to help your company achieve your goals.

National University of Sciences and Tehnology2021 BE

Pakistan International School Jeddah - English Section2017 A-levels

Pakistan International School Jeddah - English Section2015 O-Levels

Jun 20 Al Jazirah Engineers and ConsultantsSept 20

Electrical Lighting Design Cable Sizing Panel Scheduling Breaker SizingElectrical Single Line Diagrams Lighting and Power Layout Design

SiemensDec 18 Mar 19

Training in Siemens Factory Jeddah. Training on Siemens Swicthgear: NX Air, NX-C, NX-Plus

Engineering Revit MEP

Matlab and SimulinkEngineering

Engineering Basic Electrical Safety and LOTO

ArduinoEngineering

Final Year Project on harnessing renewable energy from running water channels and irrigation canals at a micro level to power rural homes and street lights etc. Designing of controller using LQR method.

Horse Riding

Swimming

Declamation

Event Hosting

Event Management

IRCA/CQI Certified ISO 9001:2015 Lead Auditor

NEBOSH International General Certificate in Occupational Health and Safety

Solar Energy Basic Training

Director Marketing and Sponsorships at student based welfare organisation named Youth Insight.


none

Capable of planning/goal setting , problem solving and conflict managment. my objective to get ajob in which i can utilize best of my skills which i learned in my degree, from my peers and onlinecourses so that i can strive for a better future..

Central Public School Khanpur2015 Matric

Alpine college of sciences Khanpur2017 F.Sc

NUST2021 B-EE

2019 IOT lab seecspresent

Research Assistant:Performed in-depth electrical acceptance testing of completedhardware.

Soft skill Good communication skills

Embedded ApplicationTechnical skills

Technical skills Machine learning

Raspberry PiTechnical skills

AgriEye:its a realtime wheat rust detection system capable of determining thepercentage of leaves affected by rust.Health moniter : capable of sending info about heart rate and location over longranges using LoRa wan.

Community Service, sports

Topper of college in Engineeringbatch

Been an active member of NCSC(nust community services club)

Did an internship in akhuwatfoundation.


Muhammad Sulaiman [email protected]

https://www.linkedin.com/in/muhammad-sulaiman-nadeem-007280150/

Utilize my knowledge and skills of Artificial Intelligence and Embedded Systems (Deep Learningand RTOS - Real Time Operating System) to make real time solutions for SDGs (SustainableDevelopment Goals), specially for rural places in my home country. This will be helped on byattaining a masters degree in robotics and autonomous systems as it will broaden my knowledge inthe aforementioned domains.

NUST - SEECS2021 Electrical Engineering

AHISK - Saudi Arabia2017 Pre-Eng.

AHISK - Saudi Arabia2013 Science

Sep 2020 ASP Lab SEECSOct 2020

Worked on creating a real time facial recognition system with collaborativelearning. The system was deployed on EDGE devices. This was achieved byusing state of the art algorithms with low latency and max possible accuracy.

-- -

-

Coding Languages Python, MATLAB, C and MYSQL

VS Code, Anaconda, Google Colab, Kaggle,Software Tools

Frameworks Tensorflow, Keras, Pytorch, Numpy,scikit-learn, FreeRTOS

Oral, Presentation, Writing, ListeningCommunication

- Real Time Internet Traffic Control and Monitoring (FYP)- 3 Digit Code Activated Door Lock System- Ludo Video Game- Transportation Management System

Project Insaniyat - Semester 2 :Helped by taking donations withinNUST from hostelites to pay for toysfor children with cerebral palsy.

Highest Achiever Shield Award inHigh School (Grades 11 and 12) -AHISK, Saudi Arabia

AI/ML Core Team Member atGoogle Developers Student Club(DSC - NUST) : Worked towardseducating people (throughworkshops), and providing real lifesolutions using AI.

Muhammad Uzair [email protected]

https://www.linkedin.com/in/muhammad-uzair-khattak-204ba1150/

Electrical Engineering bachelor student having interest in Deep Learning, Computer Vision,Embedded Systems and Data Science. I am passionate about combining these domains to buildintelligent systems that would impact people all over the world.

National University of Sciences and Technology, Islamabad2021 BEE

Punjab College of Science, BLUE AREA, Islamabad2017 HSSC

Islamabad Model College for Boys, G-9/4, Islamabad2015 SSC

08/2020 Sedenius Technologies and SEECS, NUST12/2020

Worked as Embedded Systems Engineer (contract base). Explored embeddedsystems research areas of Self Driving Cars. Proposed Electronic design andEmbedded System for "Mobile Data logger for Test-bed scale car"

i engineering Group07/2020 3/2021

Worked on project "Base Station Security System", created datasets at BTSsites in Pakistan for AI model. Implemented MobileNet classification model onNVIDIA Jetson Nano. Integrated AI system with GPS module and IP camera.

Artificial Intelligence ML/DL using PyTorch, Keras , fast.ai, OPENCV libraries

EAGLE, Autocad, Visual Studio, Linux, Tableau, AnacondaDeveloper tools

Progamming C/C++, Python, MATLAB, SQL, Javascript, HTML/CSS

7.5/9.0 overall score in IELTS academic testCommunication

1) Design of Whole Slide Image (WSI) Scanner with Deep Learning applications2) Wireless Charger3) Optimizing Deep Learning models using TensorRT library on edge devices4) Real-time Home Automation System with FreeRTOS and IoT devices5) Real-time Facial Mask detector using Deep learning

1) Leading SEECS table tennisteam as team captain since 2019

2) Orientation leader in NUSTOrientation 2019

3) Participation in internationalcompetitions

4) Team member @ NUSTLeadership Society

1) High achievers award recipientfrom DEAN of SEECS2) Featured in official blog of NVIDIA3) Among the first batch of NVIDIAAI Jetson Specialists in the world4) Appreciation letter and shieldaward from president Youth Insight5) Best Semester project award inMachine Learning course

1) Offical Ambassador of WWF andHelping Hands USA2) Co-led community serviceprogram "Meet the Seniors", aimingto connect high school students withundergradute university studentsfrom various fields for face-to-facementorship sessions3) Led community service project"Mall of Humanity", to distributecloths among the needy people inbackward areas of Rawalpindi


NAYYERA [email protected]

Nayyera Naeem

I am passionate about bringing change in the society through my expertise and skills. I am lookingforward to contribute my part to pave ways for innovative and creative solutions as a professional.

National University of Sciences and Technology2021 BE Electrical Engineering

Punjab College, Bhara Kahu2017 Intermediat

The Rise International School, Bhara Kahu2015 Matriculatio

From OrganizationTo


OrganizationFrom To


Programming C, C++

Pspice, Proteus, Multi-SIM, LABView, MATLAB, ADSSimulation

Design AUTOCAD, Adobe Illustrator

Verilog HDL, ARM Cortex.More

Cost effective fault location system for underground distribution systems.Line following robot using Arduino and infrared sensors.Bluetooth controlled robot using Arduino.3D view of NUST using AUTOCAD.Multi-tone frequency generator using ARM Cortex M4.

Executive Marketing andSponsorship in Youth Insight.Executive Marketing in NUSTEntrepreneurs Club.Executive Finance in NUST FinanceClub.Executive Marketing for OpenHouse 2018.Executive Décor for Welcome 2018.

Honors, Awards or any other WorthMentioning Achievements

Project Insaniyat 2017.Mall of Humanity by Youth Insight2019.

MUHAMMAD SERAT [email protected]

linkedin.com/in/serat-hussain-6aaba2150

I am an Electrical Engineering undergraduate from NUST. I am an enthusiastic, quick-learning andhardworking individual. I am interested in Deep Learning, Computer Vision and their applications ininnovative organizations.

SEECS,NUST.2021 BE EE

Army Public College, Pano Aqil Cantt.2017 HSSC

Army Public School, Bahawalpur Cantt.2015 SSC

Aug 2018 609 EME Regional Workshop, Pano Aqil Cantt.Sep 2018

I debugged modules of military communication equipment and implemented theproposed solutions. I had to keep a record of all the faulty equipment, sendprogress reports to the units and ensure timely dispatch of the repaired modules

Research Intern, CEFAR Lab, SEECS.Oct 2020 Jun 2021

Worked on Deep Learning projects related to object detection, testingalgorithms such as YOLO and SSD.

Deep Learning Object Detection

Data analytics and data cleaningData Science

Proj. Management Good leadership skills, Active team-player

Image EnhancementImage Processing

AI Based Target Identification, Tracking and Automatic Change Detection forMulti-copter UAVs (Final Year Project)RFID based Door Lock Scanning SystemHospital Management System

President, Student Council, ArmyPublic College, Bahawalpur (2016)

Cricket Team Captain, CollegeTeam, Bahawalpur Cantt (2016)

High Achiever HSSC AnnualExamination 2017

High Achiever SSC AnnualExamination 2015

Project Insaniyat (2017) : I, alongside my classfellows generatedfunds through different charities,bought some neccessities for theorphans at SOS village and spent aday with them.


SIRAJ MUNEER [email protected]

linkedin.com/in/siraj-qazi

Undergraduate student researcher and a freelance programmer passionate about computers andmodern technological trends. Experienced in C,C++,Python and Java, Intel x86/ARM Assembly,hardware design on FPGAs (Verilog, VHDL) using Xilinx tools, TensorFlow, Keras, PyTorch) andLinux administration. Actively learning newer skills to diversify my skillset so as to come up witheffective, innovative and scalable solutions that tackle a wide range of technological challenges.

National University of Sciences and Technology (NUST) Isb2021 BEE

Army Burn Hall College For Boys, Abbottabad2017 HSSC-II

Army Burn Hall College For Boys, Abbottabad2015 SSC-II

Sep 2019 TUKL-NUST Research & Development Center- Present

Currently working on accelerated deep learning for real-time inference on aerialimagery for disaster management (FYP). Previously worked on acceleration andoptimization of deep convolutional binarized neural networks on FPGAs.

Center for Research In Modeling, Simulation & VisionFeb 2019 Mar 2019

Collaborated with a team of software and game developers to build a distributedsimulation desktop application (under Windows) using open-source Portico asthe RTI for the HLA system.

Programming C,C++,Python,Java,Bash, MATLAB, HTML, CSS, JS

PyTorch,TensorFlow,Keras, Pandas,NumPy,MatplotlibMachine Learning

Operating Systems Linux, Windows, Android, Raspbian

Xilinx Vivado, Keil uVision, Visual Studio, PSpice DesignerProfessional Tools

1-Accelerated inference of deep neural networks on FPGAs2-Real-time Face Detection with FreeRTOS and OpenCV3-SEECS-NET (Social network in Laravel (PHP) / HTML5/CSS3/JS)4-Highway-Crossing Traffic Flow Control Simulation (ARM Cortex M4)5-Complexotron (A machine language, and a computer CPU simulator)

HONET-ICT Conference 2018:Participated in the 15th IEEEInternational Conference on HighCapacity Optical Networks &Enabling/Emerging Technologies(HONET-ICT) 2018 as a ResearchAssistant, attending seminars andguest lectures by IT Experts andProfessors from internationaluniversities on Surveillance usingUnmanned Air Vehicles(UAVs),Internet of Things and CyberSecurity.

National Finalist | Huawei ICTCompetition 2019-20Runner Up Speed Programming -NUST OlympiadFiverr Level 1 Seller in C/C++Desktop Applications

Standardized ScoresIELTS: Band 8.0 Overall

Community Service Intern| Akhuwat Foundation

Worked as a Community ServiceVolunteer at Akhuwat RegionalOffice Abbottabad, visiting the localborrowers of Akhuwat Loan schemeand producing a survey report onhow Akhuwat has positivelychanged their lives and has enabledthem to start their own microfinancebusinesses to support their families.


Wajahat AliEmail ID : [email protected]

LinkedIn ID : https://www.linkedin.com/in/wajahat-ali-7138481a0/

I am enthusiastic young professional intending tp start my career as an Electrical Engineer with anexcellent academic profile and practical experience through various semester projects and finaalyear thesis. I am passionate to become a part of a company where I can enhance my professionalknowledge and benefits the company with maximum of my abilities.

National University of Sciences and Technology (3.76/4)2021 BEE

Cambridge College, Pakpattan (989/1100)2017 F.Sc.

Govt. M.C High School, Pakpattan (987/1100)2015 Matric

Softwares Proficient in Word, Excel, PowerPoint and MATLAB

Proficient in illustratorGraphics

• Micro Hydro Power Generation Unito Designing a vertical turbine system for rural hamlets with automated gatecontrol which will help maintain the flow of water through the turbine.o Simulation for the gate control, vertical turbine unit and the generation unit hasbeen completed on matlab.

• Street School Director , Chadar(Sept 2019- May 2020)

o Lead a team of 20 individuals,prepared and taught lessons toAfghan Refugees resided in thebackside of NUST.

o Conducted many fun activates likesport gala, drawing competition, andplantation drive.

o I was awarded MillenniumFellowship, a combined effort ofUnited Nations Academic Impact(UNAI) and Millennium CampusNetwork (MCN)

o Also awarded full bachelor andIntermediate Scholarship from PEEF

• Millennium Fellowship 2020

o Lead a team of 15 individualsincluding two Millennium fellows forthe food drive.

o Raised around 0.5 million rupeesin collaboration with Froods .

o Distributed the healthy foodamongst poor in G11 and E11, Isla

Zahra [email protected]

https://www.linkedin.com/in/zahra-javed-1593a614b/

Final year student of Electrical Engineer looking for job in domain of Electronics or Power, whileapplying my entrepreneurial and other non-technical skills to establish my own business.

NUST-SEECS, Islamabad2021 BS Electrical Engineering

Federal Board, Islamabad2016 HSSC

Federal Board, Islamabad2014 SSC

07/2020 Academics OnlinePresent

Online Teaching for IGCSE Mathematics and Physics CoursesPart-Time Job

TCD (The Cryds Daily)07/2019 08/2019

Data Entry for Android GamesInternship

Programming C,C++,8086 Assembly

Matlab,Proteus, AutoCad, MS Office, Pspice, VisualStudioSoftwares

Professional Skillls Hardworking,Multitasking,Time managment

-Design and Development of Fast Circuit Breaker for DC Microgrids-Timer Circuit that Controls a Relay Using Arduino-Solar Powered LED Street Light with Auto Intensity Control,usingMicrocontroller ARM CORTEX(M4)-Design and drafting of the ground map and buildings of NUST using AUTOCad

Co-founder of clothing businessDress DesigningPhotographyFreelancingArt and Craft work

Introduction to the Internet of Thingsand Embedded Systems (03/2020 –04/2020) Coursera-University ofCalifornia, IrvineIntroduction to Business Analytics:Communicating with Data(07/2019-08/2019)Coursera-University of Illinois

-Mall of Humanity-YouthInsight,Islamabad(07/2019)-International Eco-InternshipProgram, WWF Pakistan(7/2018)-Volunteer Work SOS Village,Islamabad(02/2018)-Project Insaniyat-Al-Farabi SpecialEducation Center, G-8 Islamabad(10/2017)


HADIA [email protected]

www.linkedin.com/in/ hadia-saleem-314b35204

I am currently in my 8th semester. I am a enthusiastic, hardworking and person with good team work and leadership skills. I expect to work in a place with a good friendly work environment, with lots of learning opportunities.

Nationa University of Science and Technology2021 BEE

Punjab College2017 Fsc

Radiant Secondary School2015 Matric

6/1/2020 CNS Engineering7/21/2020I mainly worked as a front end developer but did a little work on the backend development too.

World Wide Fund (WWF)07/2018 08/2018

I worked as internee with WWF. I along with my team did a project on conservation of organic waste.

Web Development HTML, CSS, java, Bootstrap, Nodejs

Patching and analysis of circuits, multisim, proteus, Labview Circuit Design

Embedded System IoT projects, Atmel Studio, Labview

Visual Studio, ADS, AutoCAD,Programming/Archite

Combating COVID-19 Using IoMD and AII am currently working on a Machine Learning(ML), Web Development and Internet of Things(IoT) based smart healthcare project. IoT Based Motion and Temperature Sensor Networks

NUST Literary CircleAdmin Events (2017-2019)National Literary Festival (2018)Admin EventsNUST Media Club (2018-2020)Deputy Director FinanceSEECS Open house OC'18

2020-21 Technology infusion grand challenge Asia:My Team has been selected to proceed in the first stage of 2020-21 Technology infusion grand challenge Asia.Our review paper entitled AI-Enabled Internet of Medical Devices (IoMD) has been submittedfor possible publication.

SOS School VsitProject Insaniyat:Worked as a team lead for project t and raised funds of upto 40k for Pakistan Sweet HomeWheel Chair Distribution:Currently working as team lead for distribution of wheel chairs among the differently abled members of society.

Khan Moeen Danish [email protected]

www.linkedin.com/in/moeen-danish-0929371a3/

Always looking for opportunity to learn and grow. Never to settle for anything less than my best.Want to be part of an organisations that challenges me and enables me to have a positive impact on society.

SEECS, NUST H12 Campus (CGPA: 3.48)2021 BEE

FFC Grammar High School (Result: 2A*s & 1A)2017 A-Levels

Beaconhouse School System RYK (Result: 8A*s)2015 O-Levels

Jul 2019 Maintenance Intern, Fauji Fertiliser Company Goth Machi.Sep 2019Was given an overview of electrical instruments, their working and process of maintenance on the Urea plant. Acquainted with the process of developing logic for PLC's used on the plant, through a small assignment.

Partnership development executive, AIESEC International.Sep 2017 Nov 2018Volunteer work in an international organization that sends students abroad for cultural exchange. Was part of the Partnership development team, responsible for establishing relations with companies and bringing sponsorships.

Leadership Have lead national level events like Science Bee.

Procient in C/C++, MATLAB, and Python. Programming

Embedded Systems Extensive knowledge on multiple Micro-processors.

Winner of MUNs, debates and great at working in teams. Communication Skills

BioRadar - Contactless Vital signs monitoring using millimeter-wave radar: Final Year Project to develop an IoMT device to monitor respiration rate, heart rate and heart rate variability without contact.

ARM M4 based bio-metric attendance device: Programming micro-controller and integration of hardware for working model of attendance device.

Press Secretary, Nust Science Society. Leading a 5 different teams with about 30 members.

Event Head, Science Bee '19. Organising science competition with 300+ students from all over pakistan.

Team Registrations, NUST International Model United Nation.

Executive debating team,NUST Debating Society

Gold Medalist at FFC Grammar High School in A levels.

Silver Medalist (twice) in International Kangaroo Math Competition.

Best Delegate, MUNEG 15

Community Service Project: Teaching Digital Skills To Help People Obtain New Marketable Skills.

Blood Donation: Involved in multiple blood donation drives.

Volunteer teaching at government middle school in the village of Shakir Kot, Rahim Yar Khan.


Muhammad Raees [email protected]

https://www.linkedin.com/in/muhammad-raees-arshad-961871202/

An Electrical Engineer with an expertise in Embedded Systems, Electronics, and FPGA programming. I am passionate about moving forward in these domains.

NUST SEECS 2021 BEE

PAKTURK International2017 HSSC

Institute2015 SSC

2020 AUTOMATION ENGINEERING INTERN2021Worked on project "Base station security system", explored different solutions which included AI based camera system integrated with Embedded device.

NESCOME2020 2021

Simulated an END to END radar on MATLAB. Working on ECM (Electronic Counter Mesures) techniques to decieve a hostile plused radar and verified our result using the simulation created. Developing GUI for managing and operating RADAR.

EE FPGA Design

MATLAB&SimulinkEE

EE Microcontroller STM Arm andAtmel

C/C++/C#SE

Discrete Radio Frequency Memory (DFRM) based RADAR deception System using FPGA'sReal-time Home Automation systemDesign of RISC-V processorUPC Barcode Decoder

Table Tenis, Esports

Merit-based scholarship recipient (PAKTURK International)

Certificate of Recognition , for System-Verilog for Verificationworkshop organized by RISC lab and IEEE, SEECS

Appreciation letter and shield award from president Youth Insight

Volunteer at Helping Hands USA

Ambassador at WWF-PAKISTAN

Team Member HR at Youth Insight (2019-2020)

Team Member HR at Nust Archery Club (2019-2020

Abdur [email protected]

https://www.linkedin.com/in/abdur-rafay-5278b1186/

I am a passionate and innovative young professional, who has undying thirst for technicalknowledge and constantly involved in developing my skills. A reliable team member with an amiablepersonality and positive communication style. Having worked on various university level projects, Ihave been accustomed to working in a challenging and fast paced environemnt, particularly whendealing with multiple projects and priorities at the same time. I deliver, rest assured!

SEECS, NUST2021 EE

Roots Millennium College2017 Alevels

Cadet College Hasanabdal2015 O'levels

1/9/20 WWF25/9/20

Team Lead - Digital Advocacy Campaign

IOT Lab SEECS, NUST15/6/20 30/5/21

Worked on developing a network of IOT devices capable of recording HumanVital Signs (HR, Spo2, ECG, Temp, BP), and integrating them with an EdgeDevice; data processing and performing local decision making.

- Creativity - C/C++, Python, MATLAB, LabVIEW

- Embedded Systems- Team Work

- Problem Solving - Machine Learning

- Microsoft Office- Work Ethic

- Remote Health Monitoring System (FYP)- Smart Home Security System (ESP32)- Wireless Notice Board (Arduino)- Synchronous Data Transmission (Logic Circuits)

- Sports; Football- Podcasts- Book Reading- Personality Development

+ Co-author of a submitted reviewpaper for Springer IOT journal;AI-Enabled Internet of MedicalDevices (IoMD) forSmartHealthcare-AComprehensive Review

+ Straight A's in Alevels and Olevels+ More coming soon!

- Conducted Food-drives- Online Teaching- Participate actively in blooddonations.


Sarwa [email protected]

https://www.linkedin.com/in/sarwa-jalees-4915b31a4/

Final year student looking for a secure position where I can apply my engineering experiences to support the growth of the company.

National University of Sciences and Technology2021 Bachelors in Electrical Engineering

Pakistan School Muscat2017 A Levels

Pakistan School Muscat2015 O Levels

01-09-2020 Syed Al-Mahrooqi Consultancy 01-01-202Improving the AutoCad drawings for the electrical plan of houses and commercial buildings.

Starslight LLC01-06-201930-6-2019

Learned how to do marketing to sell different commercial lightings on large scale projects.

Software AutoCAD, MATLAB, Proteus, Visual Studio and Piece Pice

C,C++, Python, Assembly Programming and High LevelLanguages

Hardware All types of electrical circuits and microcontrollers

Patience, Adaptability, Time Management and CreativityPersonal

Stress Detection using Facial RecognitionHeart Rate Estimation in PythonVoice-controlled Car using ATmega16ATic Tac Toe (3x3) (With Digital Logic Design)

-Badminton (Sports)-Basketball (Sports)-Table Tennis (Sports)-Student Government-Exploring Cities-Foreign Languages (German andArabic)

-Merit Scholarship Holder O-Levels-Merit Scholarship Holder A-Levels -Inter-School Basketball Gold Medalist 2015 and 2016-Inter-house Netball Gold Medalist 2016-Inter-house Basketball Gold Medalist 2017

-Volunteered in Collection and Donation of clothes and toys for kids (6-12 years) in orphanage -Volunteer for clothes collection for donation for Street Store by Chadar 2018-Arranged Street Store with Chadar 2019 as a member

Sikandar [email protected]

www.linkedin.com/in/ sikandar-bakht

I am an Electrical Engineer from SEECS, NUST, Class of 2021. I am interested in Embedded Systems, Deep Learning and Control Systems. I am a dedicated individual looking for industry experience while possibly providing a fresh insight towards solving problems. I like challenges and solving problems. I am adaptable, willing to learn and constantly on the look out for opportunities to self improve.

SEECS, NUST (CGPA: 3.22/4.0)2021 BS EE

Punjab College of Science, Blue Area, Islamabad2017 F. Sc

SLS High School, G-11/4, Islamabad2015 Matric

Aug, 2020 Research Assistant at ROMI Lab, SEECSPresentResearch Assistant at Robotics and Machine Intelligence Lab at SEECS, NUST.Currently doing my Final Year Project on Smart Network Security

Intern at RISC Lab, SEECSJul, 2019 Oct, 2019

Research Intern at RISC Lab, SEECS. Completed projects on FPGA related to hardware developments and implementation of an ISA.

Embedded Systems Embedded C/C++ for ARM and AVR Microprocessors

Verilog HDL - Intel QuartusEmbedded Systems

Machine Learning ML and DL with libraries such as Pytorch and Scikit-Learn

PLC and SCADAIndustrial Control

- Sponge examples to detect evasive intelligent malicious software.- RTOS based Fire Alarm System (ARM Cortex M4)- Implementation of MNIST classifying CNN on memory scant microcontroller (ARM Cortex M4)- Plant Pathological Classification using Deep Learning and Pytorch

- Charity works with Al Khidmat Foundation and Chaddar Initiative.

PGC 100% merit scholarship

High Achiever scholarship in SLS.

- Chaddar Initiative for Orphans.


Zarlish [email protected]

www.linkedin.com/in/zarlish-ashfaq-7831091a1/

I am a passionate, driven, and results-oriented individual always on the outlook for new professionalexperiences. My aim is to learn, grow and innovate.

National University of Sciences and Technology, Pakistan2021 EE

Pakistan School and College Salmiya, Kuwait2017 FSC

Pakistan School and College Salmiya, Kuwait2015 Matric

Aug 2020 IoT Lab SEECS, NUSTPresent

Working on developing an IoT and AI based remote health monitoring system.Main responsibilities include developing a wireless sensor network capable ofsensing human vitals and connecting them to the cloud through an edge device.

Gulf Engineering Consultants, KuwaitJun 2018 Aug 2018

Mentored for three months on the responsibilities of a senior electrical engineerin a large project like the development of a hospital.

Programming Proficient in MATLAB, C/C++, Python

High knowledge of Pytorch, Keras and TensorFlowAI/ML

Embedded Systems Experience in developing hardware systems

A good grip on problem solving and critical thinkingProblem Solving

- Remote Health Monitoring based on IoT and AI: Final Year Project- Self-Balacing Robot: Implemented using ATmega16 and C++- Wireless Notice Board: Implemented using Arduino, an LCD module and C++- Restaurant Management System: Implemented with OOP in C++

- Executive Admin Events, NUSTScience Society

- Directer Outgoing GlobalVolunteer, AIESEC

- Played in NUST's womenbasketball team.

- Took a German language course(A1)

Co-author of a submitted reviewpaper for Springer IoT Journal titled"AI-Enabled Internet of MedicalDevices for Smart Healthcare - AComprehensive Review"

- Internship at WWF where I led ateam for a digital advocacycampaign about plastic pollution.

- A-levels tutoring at AbwabInstitute Salmiya, Kuwait.

- Worked on a project with Chadarwhere we collected winter clothesfor the underprivileged.

AZHAN [email protected]

https://www.linkedin.com/in/azhannaqeeb/

Dedicated individual with verse knowledge in the field of electrical engineering. Currently looking foran engineering position in a fast-paced organization where excellence in relevant. Coming withability to create designs and implement the procedures while maintaining the company’s reputationand adhering to legal rules guiding it.

SEECS, NUST H-12, Islamabad2021 BEE, 3.53

Punjab College of Science, Faisalabad2017 HSSC,94%

Laboratory High School, Faisalabad2015 SSC,95%

JUNE' 19 PTCLJULY '19

Internship at Optical Fiber System Terminal (Transport Department).Acquired the requisite knowledge about the Huawei and ZTE SDH Systems

FreelancingApril '19 Present

I have been doing projects related to programming (MATLAB most common)and trying to work intimately with customers to gather prerequisites andguarantee quality

Programming C, C++, MATLAB, Python, Assembly Language

Modelsim, Proteus, PSpice, Logisim, OpenCV, SimulinkDev. Tools

Hardware Arduino, STM32, AVR, Node MCU

Problem Solving, Time Management, Team Work, EthicsSoft Skills

Point of Care Electrochemical Sensor for Typhoid Using Portable PotentiostatTo calculate the resistance with image process using c++ with OpenCVA smart parking system using NODE MCU and ArduinoRISC-V Implementation on LogisimCampus Model on AutoCad

NUST Media ClubCricketFootballTable TennisE-Games

Top 10 in BoardFSc. BISE Faisalabad

Top 20 in BoardMatric BISE Faisalabad

Community Service intern atAkhuwat Foundation.

Part of Insaniyat Project


AZKA [email protected]

https://www.linkedin.com/in/azka-azhar-4ab86a187

I am an ambitious individual looking forward to play my part in the society using the skills I havegained. I have developed an excellent eye for detail, am able to work under pressure and havedeveloped management and communication skills. I also hope to continuously improve myself bylearning and implementation and hope to secure a career opportunity to fully utilize my skills.

NUST, SEECS2021 BEE

Punjab College for Women (Pre-Engineering)2017 FSc.

EMS High School2015 O Levels

10-06-19 Rohde and Schwarz, Islamabad19-07-19

Testing and Measurement Department InternElaborate insight was received on EMI Debugging and practical implementationusing Oscilloscope and an understanding of Technical Sales and Marketing

CDR Consultants07-10-20 Present

Technical WriterWriting of Competency Demonstration Report which includes Career Episodesand Summary Statement for Engineers Immigrating to Australia.

Technical Skill AutoCAD- Circuit Analysis and Design- MATLAB- Simulink

LabVIEW- MultiSim- Proteus- ADS- PSpice- OctaveTechnical Skill

Soft Skill Analytical & Organizational Skills- Team Work- Leadership

Communication & Interpersonal Skills- Critical ThinkingSoft Skill

FYP- Portable Ventilator for Mechanical VentilationHurdle Detecting Voice Controlled Car using ATmega16ATank Level Control using PID Controller in LabVIEW and MATLABWater Level Indicator with Motor Controller

- Chairperson IEEE-SEECS WIE AG- Campus Ambassador - IEEE WIEILS 2019- Deputy Director AdminCoordination NUST Student Forum(NSF)- Member Team Admin EventsHONET ICT 2018- Orientation Leader SEECS 2018and 2019- Member Management SEECSConvocation 2019

- Silver and Gold Table TennisSEECS Sports Gala 2019- First Position SDPI Essay 2013- Certificates Debating 2010-14- Parliamentary Debate Runner-up

- Ambassador SDGs Youth Squadfor Progressive Pakistan13-10-19 to 15-02-20(SDG 2 was targeted)- Active Member Healing HeartsSociety- Active Participation in FundsCollection and Donation for SOSChildren's Village


https://www.linkedin.com/in/talha-amir-2967631a4/

Focused on Power Energy Systems and IoT. Experienced with MATLAB and Proteus simulations ofpower systems. Looking to secure a supervisor position in a Solar Panel company with focus onSmart grids which allows me to fully utilize my skills while working for the success of the companyand making the society better

NUST, SEECS, IslamabadYear BEE, 2.93

Punjab group of collegesYear FSc, 90%

Jinnah International Public SchoolYear Matric, 95%

10Jul 19 GEPCO, Gujranwala23Aug 19

Learning the repairing of transformer in transformer repairing workshop andlearning to take readings and finding faults in meters in meter testing lab

GEPCO, Gujranwala16July 18 28Aug 18

Learning the working of 132 kV Grid station and its components

Software PSice, MATLAB, Simulink, Proteus, AutoCad,Visual Studio

NodeMCU, Atmega 16Hardware

Graphic Designing Adobe Illustrator, Photoshop, After Effects

Interpersonal,leadership,problem-solving,decision-makingSoft Skills

IoT based Home Solar Power System using ML/Deep LearningNodeMCU based Automated home security system4-digit combination lock system using DLD circuits.FM radio transmitter

Freelancer at Upwork: Logodesigning

Competetive Player in Fortnite

Anime and Comics

100% scholarship in 2 years of FSCat Punjab college.

100% scholarship during Metric inJinnah International Public School

Rising Talent on Upwork

Community service intern atAkhuwat Foundation

Seecs Horticulture Club

Organized clothes collection camps

MuhaMMad aMiR


FAIZAN AHMAD [email protected]

https://linkedin.com/in/fayzanx

I am an aspiring electrical engineering student looking forward to join a professional environment. The robust combination of the knowledge of both the hardware and software fields enables me as an engineer to solve problems and perform tasks in a unique and an efficient way. My areas of interest are Embedded Systems and Programming, Networks, Blockchain and Web and Desktop Applications Development.

SEECS, NUST H12, Islamabad2021 B.E. EE

FG Sir Syed College, The Mall, Rawalpindi2017 FSc. Engg

Fazaia Inter College Nur Khan, Rawalpindi2015 Matric CS

June '19 RISC Lab, SEECSAug '19

Development and Implementation of RISCV 32-bit micro-processor using Verilog HDL

FreelancingJan '18 Present

AutoCAD designing, Problem solving using MATLAB and programmingWebsite development and customizationWordpress plugin and theme development and customization

Hardware Design Verilog, AutoCAD, MATLAB, ARM&AVR Assembly & C

React, Node, Gulp, LAMP stack, Shopify, Wordpress dev.Web Development

Desktop C/C++, Python, Qt, Git, Hardware simulation & design tools

Problem Solver, Team Worker, Attention to DetailSoft Skills

Blockchain based secure electronic voting systemNodeMCU based Whatsapp weather forecast chatbotGraphical doodle search using machine learningGraphical TicTacToe implementation on ARM Cortex M3Multiplayer chess game with GUI, Inventory management system + Invoicing ...

Director Web & IT / Publishing,Executive Publishing andExecutive Event Managment in various clubs

Member Organizing Committe NUST Summer School, SEECS Open House and Pakistan human flag

Table Tenis, Cricket, Horse RidingPUBG

2016 Excellence Award2008-2015 Excellence Scholarship2010 Chief of Air Staff Gold Medal

NUST TYC Chadar ProjectAkhuwat InternshipBring a Smile Project


https://www.linkedin.com/in/zaid-mughal-aa265b193/

I am aspiring 4th year electrical engineering student looking to join a professional Industrialenvironment. I like and pursued electrical engineering because i believe it to be the bridge betweensoftware and hardware that enables it to do tasks that otherwise would have been impossible. I loveworking in teams and making new acquaintances to grow together and as a result, make things thatfar exceeds individual capability.

PDC (Professional Development Centre)2021 PM Diploma

NUST(National University of Sciences and Technology)2021 BS. EE

Superior College Sargodha2017 F.Sc.

6/2019 RISC Lab, SEECS8/2019

Made Soft RISCV32I core there

Freelancing- -

Made PCBs on EagleCAD as freelancer

Soft Specific

C/C++/Embedded CProblem solver

Fast learner Verilog/SystemVerilog

AutoCAD/SolidWorksTeam worker

3D printer(With online monitoring system)Frequency controlled car using RTOS and DSPGSM GPRS Detector and Collision DetectorIR controlled Infinity Mirror clock...

Table TennisBadmintonFootballPUBGDota

Full Scholarship 2015Full Scholarship 2016GPA based Scholarship 2018

Participated in Chadar Project

M. Mughal


Muhammad Obaid Ur [email protected]

Muhammad Obaid Ur Rahman

Secure a responsible career opportunity to fully utilize and connect my skills and education to the current job landscape, while making a significant contribution to society.

NUST2021 BEE

Roots Flagship Campus DHA1, Islamabad2017 A levels

BeaconHouse School System Abbottabad2015 O Levels

01-8-2016 NERA30-8-2016Understanding the workings of Antenna Signal Transmission and Field trips to PTCL exchanges.

ROMI Lab, SEECS, NUST15-9-2020 15-4-2021

Working on a Low cost smart robotic grasper trained using a CNN.

Technical ROS (Robot Operating System).

Microsoft Excel, Word and PowerPoint.Technical

Technical Python.

Deep Learning.Technical

1)Water Level Detection and Automatic Water tank filling using Arm Cortex M3.2)Evil Hangman, using C++.3)Game Of Life, using C.4)Home Security System, using Logic Gates.5)Soil Monitoring, using Node MCU and Arduino.

DOTA 2.Table Tennis.Badminton.Reading Books and Watching Documentaries.Anime.

Academic Scholarship 2012.

Full Academic Scholarship 2015-2016.

Full Academic Scholarship 2016-2017.

Akhuwat Foundation Internship in 2018.

Salman [email protected]

https://www.linkedin.com/in/salman-nasir-7792721a2/

I am a highly driven, dedicated individual and a motivated team player who is looking forward to utilising my fresh knowledge, analytical thinking and communication skills and secure a challenging position in a reputable organisation.

National University of Sciences and Technology2021 BEE

Bloomfield Hall School2016 A-Levels

Bloomfield Hall School2014 O-Levels

5-10-2020 ROMI, Lab, SEECS, NUST30-4-2021Lead intern/Utilising ROS programming and deep learning concepts and developing a robotic arm grasper/Robot EV3 kits

RISC-V Lab, SEECS, NUST5-10-19 15-12-19

Introduction and coding in Verilog HDL(Altera for Intel FPGAs)

Electronics, Controls Pspice, MultiSim, Proteus,ADS,Matlab,Labview

Quartus,LogiSim,ModelSIM,VHDL,ROS,PythonEmbedded,Robotics

Networking,Stats Wireshark,eNSP,Minitab,SPSS,MSOFFICE

Teamwork,Adaptability,Problem-solving,Willingness to learnCommunication skills

Low Cost Robotic Grasper, Resistor Value Decoding through Images, Smart Agricultural Monitoring System, Car Parking Management System, Smartphone Operated RC Car

COD Mobile(e-gaming), legendary ranked for consecutive seasons.Participated in Batch Level Table Tennis Tournaments.Cricket captain for school team and winner of inter-school championship.A capable football player. Reading, with decent amount of interest in history.

Secured 5th position in National Science BEE competition from teams all over Pakistan.Developed pipeline of RISC-V architecture.Completed Business Minors in ACCOUNTING, MARKETING, FINANCIAL MANAGEMENT, and BUSINESS MANAGEMENT(currently enrolled).

Internship at Akhuwat Foundation for public/community service


Sardar Hassan Arfan [email protected]

www.linkedin.com/in/sardar-hassan-06a137168

I want to work with extraodinary people and use my skills to be a part of something revolutionary and want to be help bring change in the lives of people.

SEECS, NUST H12 Campus (CGPA: 3.69)2021 BEE

Beaconhouse Margalla Islamabad (Result: 4A*)2017 A Levels

Beaconhouse F11 Campus Islamabad (Result: 5A* 4As)2015 O-Levels

Jul 2020 Adaptive Signals, Lab SEECS, NUSTOct 2020

Created a custom Neural Network along with using transfer learning to test ResNet-18, AlexNet, GoogLeNet, and SqueezeNet for problems is agriculture. Also made use of transform domain techniques and data augmentation.

PTCL IslmabadJul 2020 Sep 2020

Worked on a program in Python to monitor trends on social media by extracting, preprocessing, grouping & analyzing sentiments & complaints from posts; analyzed using Gensim LDA. Categorized Þndings were stored in a CSV Þle.

AI/ML High Knowledge of Pytorch, TensorFlow, and KerasProÞcient in C/C++, MATLAB, and Python. High understanding of data structures and algorithms.Programming

Project and Team Management Have led 4 different project teams and worked on 6 projec

Expert communiction skills Communication Skills

BioRadar: Used a 60 GHz radar for contactless vital sign monitoring.Portable ECG Monitor: Created a portable ECG device capable of measuring Heart Rate and Heart Rate Variability with >90% accuracy.Biometric Attendance Marking System with ARM M4.Banking Management System: Created a GUI with full backend functionality.

Director Media, NUST Debating Society: Led a team of 4 to provide media coverage of multiple events.

Logistics, NUST Fine Arts Club: Ordered and installed advertisement and decor equipment for three major events.

Travelling: Organised a trek for 30 people to Muzaffarabad and Pir Chanasi in Kashmir.

Gold Medalist Beaconhouse Northern region for both O & A levels.

Received 100% meritscholarship for 2 years in A-Levels.

Bazeecha Trust: Worked to raise awareness to support primary education of underprivileged children.

Blood Donation: Have donated blood to patients.

Urwa tul [email protected]

https://www.linkedin.com/in/urwa-tul-wusqa-a20bba153

Secure a responsible career opportunity to fully utilize my training and skills, while making asignificant contribution to the success of the company

NUST-SEECS2021 BEE

Bloomfield Hall Upper School2017 Alevels

Sadiq Public School2015 O levels

2018 Akhuwat foundation2018


Freelancer on fiverr2020 -

Work as a statistical analyst

Embedded systems Verilog, FreeRTOS

Object Oriented Programing (C++), Arduino,MatlabComp Programming

Electrical Lab View, Proteus, LogicWorks, Multisim, LTSpice

AVR, Arduino, NodeMCUMicrocontrollers

FYP: Water metering in residential sector Sudoku solverSmart Car Parking System Snake gameMobile Phone Detector Tic Tac ToeWater Level Management SystemValet Parking system

● NUST DEBATING SOCIETY teamadmin events (worked in 2 events)● NUST BAZM E PAKISTAN teamadmin events (OC member of 4events)● NUST TECHNICAL AMUSEMENTCLUB team protocol (OC member 4events)● NUST BIOREACH SOCIETY teamadmin events● NUST DEBATING SOCIETY teamadmin events

Mantained a 100% client satsifactionon Fiverr

Levelone seller on Fiverr

Insaniyat project

Worked at akhuwat foundation


Danyal [email protected]

https://www.linkedin.com/in/danyal-saqib-626545171/

NUST SEECS Electrical Engineering student, class of 2021. My core interests are Embedded Systems, Deep Learning, Control Theory, and DSP. I am also a Mathematics and Physics enthusiast.

SEECS, NUST (CGPA: 3.55/4.0)2021 Electrical Engineering

Roots School System, DHA-1, Islamabad2017 A Levels

The City School, Cantt Senior Branch, Rawalpindi2015 O Levels

Aug, 2020 Research Assistant at ROMI Lab, SEECSPresentResearch Assistant at Robotics and Machine Intelligence Lab at SEECS, NUST.Currently doing my Final Year Project in the domain of Self-Supervised Robotics.

Deep Learning Intern at ASP Lab, SEECSJul, 2020 Oct, 2020

Research Intern at Advanced Signal Processing Lab at SEECS, NUST. Projectsdone in Deep Learning and Computer Vision.

Embedded Systems Embedded C/C++ for ARM and AVR Microprocessors

Verilog HDL - Intel QuartusEmbedded Systems

Machine Learning ML and DL with libraries such as Pytorch and Scikit-Learn

Quantum Programming and Algorithms with QiskitQuantum Computing

- Scalable Self-Supervised Learning for Robotic Grasping- RTOS based Night Time Traffic Light Controller (ARM Cortex M4)- Systematic Comparison of Neural Network Architectures- Plant Pathological Classification using Deep Learning and Pytorch

- Nust Literary Circle (Graphics Designer)

- IEEE, SEECS Chapter (Logistics and Graphics)

-HONET-ICT (Graphics Designer)

- SEECS Government Association (Graphics Designer)

- NUST High Acheivers Scholarship (May 2019, January 2020)

- Roots Merit Scholarship, 2017

- LGES Scholarship, 2012

- SEECS Horticulture Society

Gul E [email protected]

https://www.linkedin.com/in/gul-e-zahra-8803971a4/

To work for an organization which provides me the opportunity to employ my skills and knowledgeand also contribute in the success and growth of the organization

Engineering (NUST)2021 Electrical

Roots Ivy School System2017 Alevels

Beaconhouse School System2015 Olevels

Aug'15 USAID Small Grants and Ambassadors Fund Programto Sep'15

Worked as an intern under the supervision of HR director-wrote a report highlighting the details of a case study

Auto CAD MATLAB NI Labview

Visual Studio PSPICEADS software

Atmel Studio Proteus Assembly Language

C, C++ XilinxVerilog

FINAL YEAR PROJECT- RF energy harvesting device (ongoing)Multiple DC Motor controller using ATMega-16(2019)simple airplane model(2018) Tug of war game(hardware) (2018)3D Model of NUST using AutoCad(2017) Evil Hangman Game in C++ (2018)TicTacToe in C (2017) Student Directory in C++(2018)

1. Served as the student counselorin Olevels (2014 – 2015)2. Served as the Music ClubPresident (2011 – 2012)3. Served as the Music ClubGeneral Secretary (2009 – 2010)4. Participated in Urdu and EnglishDebate Competitions in primary andsecondary school years

1. Awarded with best academicperformance duringprimary and secondary school years2. Received academic basedscholarship during O andAlevels3. Gold medal in Olevels(5A*'s,3A's)4. Gold medal in Alevels (1A*,2A's)5. Singer of the year award(2008)

INSANIYAT project-2017-collected donations for children ofPakistan Sweet Homes


Jannat [email protected]

https://www.linkedin.com/in/jannat-ayyaz-007462166

To pursue a challenging career and be a part of progressive organization that gives a scope toenhance my knowledge and utilize my skills towards my growth. I am confident withmy abilities to come up with interesting ideas to accomplish my tasks and goals.

National University of Science and Technology2021 Bachelors in Electrical Engineering

Hamza Army Public College2017 FSc. Engg

Siddeeq Public School2015 Matriculation

Sept 2020 Attock Oil Refinery Oct 2020

This internship included study and on site visits of all the sections of refinery.These section includes: Heavy Crude Unit, Reformer unit, DHDS Plant, SulphurRecovery Plant, Isomerization Plant, Power Plant, Sub Station and Grid Stations

Pakistan Engineering ServicesOct 2019 Sep 2019

Power Distribution System & Grid Station Mechanism study. Sub-station andHydro-power plants Mechanism Study. Study of all the bidding documents of allhydro projects and Power Generation plants

Languages C/C++/Python Programming

MATLAB, LabVIEW, PSPice, Multisim, Proteus, AutoCADDesign Software

Computer Software Visual Studio, Keras, Tensorflow, Anaconda

Word, Excel, PowerpointMicrosoft Office

Tug of War Game, Restaurant Management System, Frequency SensitiveLEDs, Huffman encoding, Sudoku, Temperature & Humidity Monitoring &Control system, NN Classifier for CIFAR-10, Projects in LabVIEW/ C/C++/Java/Python, Stress monitoring and Detection through facial Recognition

-AD Liaison Nust Media Club,-Team Stage Management NDC,-Team Protocol FICS'20,-SEECS Open House Team-Security, Participant Bestival'18,-Organizing Committee ofDramafest,-Team Marketing Dramafest,-OC SEECS Orientation,-Director Admin Events Globalvillage,-Sketching,-Travelling

Language - German A1Language - German A2Language - French A1

-Volunteer Internship with AkhuwatFoundation-Project Insaniyat-Chadar

Momin Ahmad [email protected]

https://www.linkedin.com/in/momin-ahmad-aa448b186/

A final year Bachelors of Electrical Engineering student at SEECS, NUST with a core interest inEmbedded Systems, Computer Vision, Image Processing and Deep Learning.

SEECS, NUST H-12, Islamabad2021 BEE, 3.98

Punjab College of Science, Blue Area, Islamabad2017 HSSC, 92%

EMS High School, H-11/4, Islamabad2015 SSC, 91%

June 2019 SIGMA Lab, SEECS, NUSTPresent

• Development of Whole Slide Imaging Scanner.• Worked on Image Processing, Deep Learning, Electronics, Computer Vision.• Mentored the Interns for Summer 2020.

SEECS, NUSTApril 2019 April 2020

Teaching Assistant for the course "Digital Logic Design", under the supervision of Assistant Professor Arshad Nazir.

Programming C, C++, MATLAB, Python, Assembly

PyTorch, TensorRT, OpenCVML/DL

Hardware Arduino, NVIDIA Jetson, STM32, AVR

PSpice, Proteus, Quartus, AtollicSoftware

• Whole Slide Imaging (WSI) Scanner with Deep Learning Applications.• Deep Learning Inference Acceleration using TensorRT on NVIDIA Jetson.• Implementation of RISCV Core using Verilog.• Plant Pathology Kaggle Competition using Transfer Learning.• Smartphone Controlled Car using ARM Cortex M4 based STM32 MCU.

• Table Tennis• Dota2• Gardening• Reading

• NUST Merit Scholarship for top100 in Entry Test.• NUST Merit Scholarship for everySemester GPA.• Top 25 NPTC 2016-17.• 1st position in GIKI Entry Test.• 1st position in PIEAS Entry Test.• 2nd position ISMO 2012.• 3rd position ISMO 2011.

• Community Service intern atAkhuwat Foundation.• Organized clothes collectioncamps.• SEECS Horticulture Club


Abdul Mohamin [email protected]

https://www.linkedin.com/in/abdul-hashmi-a72486186

A student of Electrical Engineer from NUST. Quite well efficient in Interpersonal skills, managingand handling teams, work ethics, also into lab works and project design and research. Very muchenjoys programming, logic design, circuits and AI.My objective is to work in an exciting and professional environment of an organization with personaldevelopment and growth possibilities and to achieve the targets assigned up to the best of my level

Engineering (NUST) CGPA-2.732021 Electrical

Nishat College Of Science2016 HSSC

Nishat School Of Science2014 SSC

June,19 NUST SEECSMarch,20

I have worked as TA under Prof. Habeel Ahmed for an advance electronicscourse in NUST university. I have helped him in his assignments marking andlab work. In lab I had to teach the kids about equipments available in lab and ho

AKHUWATAug,18 Oct,19

Akhuwat was my first professional environment in which I worked for a month.Here I used to keep track of instalment people pay for the interest free loanprovided them for their business and keep a check on them

Autocad MATLAB Labview

Visual Studio PSPICEADS Software

Atmel Studio C, C++ Assembly language

Proteus XilinxVerilog

FINAL YEAR PROJECT: Self Supervised Robotic Armultiple DC Motor controller using ATMega-16(2019)simple airplane model(2018) Tug of war game(hardware) (2018)3D Model of NUST using AutoCad(2017) Hostel Management in C++ (2018)CMS setup in C (2017) Home Automation System (2019)

Director Admin Events in team:. Nust Media Club. Nust Excursion Club. Nust Entrepreneurs Club

EVENTS:

• Orientation ON’18• MEDIA FEST NUST• TEDx NUST• Google talks NUST.• Orientation ON’19

1,60,000 Rs/- Scholarship on Matricresult (2014)1,00,000 Rs/- Scholarship in interinter college badminton tournamentwinner (2015)Best acting performance certificate(2016)emotional intelligence for Success

AKHUWATI used to keep track of instalmentpeople pay for the interest free loanprovided them for their business andto keep a check on their progress

CHADARHere I worked for people who lackedbasic necesities. I did the work inHR department for them.

Muhammad Talha [email protected]

https://www.linkedin.com/in/talha-bhatti-9669ab1a2/

To integrate my knowledge in various domains of electrical engineering and computer science,improve and expand upon my skill-sets, get hands-on experience and exposure in industry.

National University of Sciences and Technology (NUST)2021 BEE

Punjab Group of Colleges2017 F.Sc.

New Science Foundation High School2014 Matric

July 2018 AkhuwatAug 2018

Community service, distribution of loans and funds.

IPT Lab, SEECSOct 2020 Present

Research projects related to LoRaWANs technology.

Hardware Arduino Uno, Atmel AVR, ARM Cortex M4, LoRa

MATLAB, LabVIEW, AutoCAD, eNSP, MS OfficeSoftware

Programming C, C++, Python, Assembly, Tensorflow, Keras

Interpersonal,leadership,problem-solving,decision-makingSoft Skills

Water level detection using FreeRTOS, Controller design for step response ofairplane roll-angle, IoT based health monitoring system using NodeMCUESP8266 Wi-Fi module, Micro-controller based image classification usingartificial neural network, 16-bit bare-bones door lock system, Text filecompression using Huffman coding, DTMF based home automation.

• Book reading• Video games• Nature, biopic and historicdocumentaries• Astronomy and space exploration

• First division in Matric and F.Sc.• Machine Learning and DeepLearning Certifications

• Community work in Akhuwat• Charity volunteer for Chaddar inSOS Children’s Villages• Leadership experience in semesterprojects


Musa Jabbar TaibEmail ID : [email protected]

LinkedIn ID : https://www.linkedin.com/in/musa-jabbar-taib-9a24431a2/

I like to work in an environment that enables me to use my strong organizational skills, educationalbackground as an Electrical Engineer, and ability to collaborate well with people, to their full extent,in a manner that is both productive and fun

SEECS, National University of Sciences and Technology.2021 BSElectrical

NBS, National University of Sciences and Technology.2021 Minor - BM

Edwardes College Peshawar.2017 A/O Levels

09/2020 ROMI LAB, SEECS, NUSTPresent

• Working as a Research Assistant at Robotics and Machine Intelligence lab.• Created RNN architecture GANS that can generate fake UDP and TCP Traffic.• Made Several different Classifiers to test Gan Traffic.

Aljomaih and Shell Lubricating Oil Company (JOSLOC)06/2018 07/2018

• Worked as a summer intern in the Oil Blending Plant Department.• Familiarization of Safety and Fire Alarm system.• Blending Plant operation and maintenance.

Technical Power System (Analysis, Protection, Transmission)

High level Programming language (Python, C++, MATLAB)Technical

Technical Machine Learning (Pandas, NumPy, Scikit-Learn)

Business Studies (Marketing, Finance, Accounting)Technical

• 5 Stage Pipelined RISC-V Processor on FPGA.• Bluetooth controlled car using ARM Cortex M4.• Banking Database System using C++ and Windows Forms.• Custom Local Area Network in Python.

• Dota 2• Anime• Table Tennis• Badminton• Fortnite• Halo• Chess

• Prime Minister Laptop Award,Higher Education Commission(HEC) May 2019• Merit Scholarship, EdwardesCollege 2016 – 2017• Outstanding Cambridge LearnerAward, Cambridge IGCSEExaminations June 2015

• JUNE 2018 – MID JULY 2018Summer Volunteer, Mental HealthCentre, Peshawar

• SEPT 2018 – JAN 2020MEMBER, SEECS HorticultureGroup, NUST, Islamabad

Nida Haq (Electrical Engineer)[email protected]

https://www.linkedin.com/in/nida-haq-761574137/

I am a hard-working individual with strong intention to work and eager to learn about new technologies and business ideas.I want to succeed in my job career inorder to fulfill my personal goals as well as goals of organization.I am able to work well both on my own initiative and as partof a team.

NUST (SEECS) Islamabad2021 Elect Engr

Quality School & College Wah Cantt2017 FSC

Quality School & College Wah Cantt2015 Matric

14/09/20 Wah Noble Group Of Companies Wah Cantt15/10/20

(Internship) I worked on Formaldehyde Chemical Plant,its instrumentation andcontrol ,Power systems Protection equipment, safety and maintenace.I alsohave research and experience about design and working of PV Solar plant.

Microsoft Virtual Internship1/07/20 16/07/20

I completed practical task modules in Microsoft's organizational values,smartgoal setting,corporate culture ,personal branding and various commiuncationskills.

RF&Microwave Antenna Design (HFSS)

Control and power system protection Design MS Word

MS Power Point Matlab

Problem-solving ,creativity ,planning,persuasionManagement

RF Energy Harvesting Device (Final Year Project)Electronic Water Level DetectorCell Phone DetectorSmart Car Parking Management System

Executive PublicationsNUST BioReach Society2018, Writing blogs ,captions and social media marketing content

Member of Organizing CommitteeSEECS NUST Food Fest2018

Reading books,watching TV shows of cultures across the world ,art and crafts ,badminton,music,poetry.

Awardee of Prime Minister Laptop Scheme Phase IV(2018)Merit Scholarship Holder FBISE HSSC result (2017)Merit Scholarship Holder FBISE SSC result (2015)

Ambassador at FROODS2020-present

Summer InternAkhuwat Foundation2018, Office Management regarding Micro-finance loans

Fundraiser VolunteerProject Insaniyat Chaadar Chapter NUST2017, Collection of Donations , their utillization and other distributiontasks


NOOR [email protected]

https://www.linkedin.com/in/noor-waqar-654060207/

The want to learn from the educated and the forerunners, because only a faithful follower can aspireto lead one day, and work for the betterment of the community

NUST | Islamabad, Pakistan2021 BE-Electrical

Bahria College Islamabad2017 A Levels

Bahria College Islamabad2015 O Levels

Aug 2020 Information Processing and Transmission Lab. | NUSTPresent

• Comprehending 5G Network Principles.• Incorporating Non OrthogonalMultiple Access (NOMA) in 5G Networks.• Uniting 5G - NOMA and Mobile EdgeComputing (MEC) for higher system throughput • Reinforcement Learning

Signal Processing and Machine Learning Lab. | NUSTMar 2019 Aug 2019

• Using Deep Learning algorithms to analyze anomalies in Microscopic MedicalSlides.• Developing multiclassification algorithm for classifying skin cancer inpatients.• Identifying anomalies through image segmentation and classification

Technical Skills ATMEL Studio, MATLAB, Simulink, AutoCAD

PROTEUS, PSpice, Pytorch/tensorflow/kerasTechnical Skills

Soft Skills Interpersonal Skills, Leadership & Management, Teamwork

Problem Solving Skills, Work EthicsSoft Skills

• Air Pollution Monitor: Designed a low cost prototype of a system to monitor realtime air pollution in the atmosphere • Design of FM Transmitter: Conceptualizedand designed a low cost, portable FM transmitter device. • Laser EngraverComputer Numerical Control (CNC) Machine. • Real Time Ultrasonic DetectionSystem with GUI

• NUST Media Club - Treasurer.Handled transactions worthPKR 2 million• Organizing Committee Member forTeam Finance, NUST Olympiad ’19.Handled transactions worthPKR 9 million.• Organizing Committee Member forTeam Finance, Orientation of NUST‘18. Handled transactions worthPKR 2 million.• NUST Community Services Club –Deputy Director of Finance.

• Fauji Foundation ExcellenceAward – AY 2018, 2019 and 2020.Worth PKR 60,000/annum.• National Distinction in Economicsfor GCE A-level, AY 2016-2017.• Diploma Distinction in AdvancedInternational Certificate of Education(AICE), AY 2015-2016.• Regional Distinction-Best Across 4

• World Wildlife Fund• Orphans kNOw More• Blood Donation Drives• Fem Power• Footymania and SOS Olympiad• Al Qalam Program• Ration drives

SHAHZAIB SAQIB [email protected]

https://www.linkedin.com/in/shahzaib-s-warraich-348aa714a/

I want to work in a fast, challenging, and dynamic environment that strives me to evolve myself as aprofessional. I hope to gain useful experience to further my goal of pursuing a career in datascience in the finance industry.

National University of Sciences and Technology, Islamabad2021 BE (EE)

Aitchison College, Lahore2017 A Levels

Aitchison College, Lahore2015 O Levels

May' 20 KPMG, LahoreJune' 20

Achievements:1) Highest model accuracy of 94%2) Presented the insights to the customer

KBS Lab, SEECSJuly'20 May'21

Final Year Project:The Epidemic Control Portal

EE MATLAB, Simulink, PSpice, Proteus, Multisim, LabVIEW

C/C++, Python, Algorithm design.CS

Data Science Storytelling, Sk Learn, PyTorch, Keras, Pandas, Seaborne

Leadership, Team playing, Project management,Management

1) U.S. telcos customer churn prediction2) IMDb movie review sentiment analysis3) Airbnb rental price prediction4) Time series analysis of COVID-195) IoT powered Smart Farming Management System

1) NIMUN society: Asst. Director(Committees) 2020

2) ACMUN society: CommitteeDirector (UNHCR) 2017

3) Aitchison College Cricket Team(Vice Captain) 2017

1) 2nd Best leaving student (Alevels)2) Vice captain college cricket team(A levels)3) World distinction (O levelStatistics)

Chadar:

Street School for underprivilegedchildren in Afghan Abadi,Islamabad.- Career Counsellor- Instructor- Administrator


Shanawar Ali [email protected]

https://www.linkedin.com/in/shanawar-ali-b7a78414a/

To bring ideas into reality with vigorous self analysis of doing valuable work and always moving forward with zeal and commitment.

SEECS, NUST H12, Islamabad2021 BEE

Acme College, Sargodha2017 HSSC

Sanai School System, Sargodha2015 SSC

Mar 20 Home TutionJune 20

Teaching Mathematics and English

Programming C,C++,MATLAB,Python,Assembly Language

Autocad,Logisim,Proteus,Pspice,MultisimDesign Tools

Hardware Arduino,Raspberry Pi,Node MCU, PIC, AVR

Time Management,Problem Solving,Team work,LeadershipSoft Skills

FYP: Detection Of Tuberculosis in X-rays using Machine Learning (ML)Flight SimulatorVending MachineWireless Slide ChangerFootball 2D game

FootballCinema

Top 100 Merit Position in Nust EntryTestFull semester waiver scholarshipNUSTFBISE Scholarship 4 yearsVice President Nust Cinema ClubCaptain Football Team

Community Service Intern inAkhuwat Foundation

SHEERAZ [email protected]

https://www.linkedin.com/in/thesheerazahmed/

I am senior year student pursuing Bachelors in Electrical Engineering. Developed the requiredanalytical abilities and technical skills for engineering innovative designs and applications.My areasof the interest are Machine learning, Data Science, Embedded Systems and Digital ImageProcessing.

SEECS, NUST H12, Islamabad2021 BEE

SST Public School Rashidabad,Sindh2016 A levels

SST Public School Rashidabad,Sindh2014 O levels

June'20 PTCLJuly'20Internship at PTCL Internet Services office.Acquired the knowledge of the Internet Networks and Internet Services.

FreelancingJan'19 Present

I have been doing projects using the programming and Matlab environment todesign the systems.

Programming C,C++,MATLAB,Python,Assembly Language

Logisim,Proteus,Pspice,MultisimDesign Tools

Hardware Arduino,AVR,STM32,Node MCU

Time Management,Problem Solving,Team work,LeadershipSoft Skills

Point of Care Potentiostat for Typhoid DetectionSmart Parking System using Node MCU and ArduinoImage Classification using Machine LearningHome Automation using Atmel AVRCampus Model using AutoCad

School Hockey Team MemberSchool Dramatics Club MemberSchool Event Managment team

Meritorious Award by HabibUniversity,Karachi.Topper Award in School for gradesin A levels.School Prefect

Community Service Intern inAkhuwat Foundation

Teacher for underprivileged childrenof rural areas TandoAllahyar


Syed Haider [email protected]

https://www.linkedin.com/in/syed-haider-ali-19a83814b/

I am final year Electrical Engineering student at SEECS NUST. My areas of interest are PowerSystems, Deep Learning and Communications. I am also doing a Minor in Managment from NBS,Islamabd to get a flavour of the other side of the specturm.

NUST, SEECS, Islamabad2021 BEE, 3.87

Lahore Grammar School, Lahore2017 A-Level

Lahore Grammar School, Lahore2015 O-Level

April / 20 Information Processing and Transmission (ITP) LabPresent

-Research regarding LoRaWAN communication technology-Courses on Deep Learning and Data Science

Programming C, C++, Python, MATLAB, HTML

Word, Powerpoint, ExcelOffice

Hardware Arduino, STM32, AVR, ARM Cortex

Pspice, ProteusSoftware

-Efficient Resource Allocation in LoRaWANS-Online Sopping database system-Ultrasonic Sensor using ARM Cortex M3-Air Pollution Monitoring System

- Book Reading- Badminton- Cricket

- NUST GPA merit scholarship- 7th position in batch of 200- Top in school in A-Levels- Top in school O-Levels

- 01/2016 - 05/ 2016: Interned at theRising Sun Institute for SpecialChildren. I was a Teacher'sAssistant for ages 5 to 12.Organized Sports Gala and Donor'sDinner- 06/2018: Interned at the ClothesBank, run by transgenders, inAkhuwat Foundation for one monthTook part in cloth distribution andcollection drives, door-to-doorawareness and seminars.

Syed Usama [email protected]

https://www.linkedin.com/in/usama-minhaj/

To be an integral part of a dynamic and progressive organization by utilizing my knowledge andtechnical skills.

SEECS, NUST H-12, Islamabad.2021 BEE

Adam Jee. Govt. Science College2017 F.Sc.

Suffah Savior School2015 Matric

Aug 2020 Turkish Aerospace IndustrySep 2020

Worked in System Integration Lab in Turkish Aerospace Industry’s headquarterin Ankara as Embedded Systems Design Intern.

Information Processing and Transmission (IPT) LabApril 2020 Present

Working on research projects related to Long Range Wide Area Networks(LoRaWAN) and Non-Orthogonal Multiple Access (NOMA).

Programming C, C++, Python, Assembly, SystemVerilog

MATLAB & Simulink, LabVIEW, eNSP, AutoCADSoftwares

Hardware FPGAs, ARM Cortex, Node MCU, AVR, Dragino gateway

LoRaWAN, RTOS, PyTorch, Socket ProgrammingTechnologies

5-stage pipelined RISC V Architecture on Verilog, IoT based Smart Air QualityMonitoring System, Robotic Arm using Servo Motors and ARM Cortex M-3,Monte Carlo Simulation of LoRaWAN IoT Network on MATLAB. Two PlayerChess on C++.

Book readingChessE-gaming

Merit Scholarships for positionholders Intermediate Board Karachi

NUST Merit Scholarship

The Citizen Foundation -Mathematics Teacher

TABA Youth Chapter NUST -Executive Member


TALHA [email protected]

https://www.linkedin.com/in/talha-nasir-7b977214a/

I want to broaden my skill set and use my organizational and technical skills to help others and solve different problems being arised by the latest technology.

SEECS, NUST H-12 Islamabad2021 B.S - EE

Gov't Degree College for Boys, Sharaqpur Sharif2017 Intermediate

Gov't Pilot Secondary School, Sharaqpur Sharif2015 Matriculation

08/2020 RUMI Lab, SEECS, NUSTPresentStudying different network security problems and building a bot that can generate fake traffic and hence can bypass the network security and then, developing an algorithm to counter it.

ASP Lab, SEECS, NUST05/2020 Present

Solving different sorts of deep learning algorithm problems and different sorts of augmentation techniques to assemble data.

Communication WireShark, eNSP, RAPL Tool

Quartus, Atmel, Atollic, Verilog, Assembly LanguageEmbedded

Power, Electronics Pspice, ADS, Multisim, Logisim, Power System Analysis

Python, C/C++, Deep Learning, Tensorflow, KerasTechniques

1 - Neural Network Intrusion Detection System2 - Custom LAN using python3 - Etheruem Blockchain on ubuntu4 - Automated Garage System5 - Car Tracking System using ARM M3

CodingScoutCricketTable TennisBook Reading

Achieving the highest degree for a scout in Pakistan, awarded 100 per year.Province level basketball champion at school level.

1 - Intern: The Citizen's Foundation:Collecting clothes from different areas and distributing clothes among the poor.2 - Teaching Assistant: Punjab Group of Colleges

TALHA [email protected]

https://www.linkedin.com/in/talha-kamran-5457621a4

A talented and enthusiastic electrical engineer who wants to make sustainable and efficientsolutions for the world especially using renewable energy and IT. My ultimate goal is to work inindustry R&D as I believe, I can make the greatest contribution by utilizing my educationalbackground and creativity as a researcher.

BE Electrical Engineering, SEECS, NUST, Islamabad2021 BEE, 3.44

Pre-Engineering, Army Public College, Karachi Cantt2017 HSSC,90%

APSACS, Seven Streams, Quetta Cantt2015 SSC,94%

Sep 2020 FFBL Power Company Limited, KarachiOct 2020

• Analyzed the power distribution schematics and layout of the coal power plant(130MW Capacity).• Learned about the operation and maintenance of the boiler, steam turbines etc

Research Work with FYP SupervisorsSep 2020 Present

Working on a research paper based on my FYP findings. (review paper basedon solar forecasting techniques and demand side management)To be presented at IEEE HONET 2021 Conference

CS Machine Learning on Visual Studio Code and TensorFlow

Designing power converter circuits on LT SpicePower Engineering

Control Systems Filters and PID controller design on MATLAB

AVR assembly & embedded C on Atmel StudioEmbedded Systems

Final Year Project (FYP) - IoT and Machine Learning based Home Solar PowerSystem1. Reliable UDP File Transfer Program 2. MP3 player using AVRMicrocontroller (Atmega16) 3. Smart Smoke Detector circuit 4. Smart NoticeBoard using Arduino and WiFi Module 5. House Prices Prediction using ML

Won multiple tennis tournaments atSchool and College

Won Batch Table TennisTournament 2 times

Runner Up in Hostel BadmintonCompetition

Won Fortnite online tournaments

Received merit based FaujiFoundation Scholarship (PKR65,000 per year) during BEE

Secured 2nd position in Sindh andBalochistan provinces (HSSC)

2nd position in Balochistan (SSC)

Community service intern atAkhuwat Foundation

Volunteer Work at SEECSHorticulture Club

Organized Clothes Collection Campat NUST and in Karachi

Blood Donation Drive


Zain [email protected]

https://www.linkedin.com/in/zain-bajwa-2355b21a4/

To secure a worthy position to employ my technical and interpersonel skills to contribute toward theprogress of a reputable company.

To work in a professional organizational environment where I can grow my skills and knowledge bymeeting the organizational objectives.

NUST, Islamabad2021 BEE

Punjab College of Science, Gujranwala2017 FSC

Sialkot Grammar School, Daska2015 Matric

22/6/19 RISC LAB, NUST8/8/19

1) Implementing Single-Cycle-RISC-V architecture on LOGISIM2) Implementing hazard-free fully-pipelined RISC-V Architecture using VerilogHDL on CYCLONE-II FPGA

Software C, C++, Python, MATLAB, Tensorflow,

ARM, AVR, MIPS, Sytem Verilog, FPGAhardware

Interpersonel Critical and creative thinking, time management

Problem Solving, Teamwork and AdaptabilityInterpersonel

Smart Presentation remote controlerVending Machine using Digital Logic DesignWater level control system using FreeRTOSTB detection from CXRays using Machine Learning

Reading Books for self ImprovementWriting Product Reviews

--SportsSnookerSquashCricket

High Achiever in STEP for ECAT2017 in Pakistan

1st position in straight and relayrace in interschool sport programme

Tecaher Assistant forMicroprocessor Course, NUST

Distributing Gifts to Needy and Poorthrough Akhuwat Foundation andLearning the objectives and workingstructure of Akhuwat Loans

Contribution in Blood donation campheld in NUST


Abdullah [email protected]

abdullah-nadeem-a8b031154

I aim to find a job that enables me to put my techincal knoweldge to use and be add vaue to the team i join.

NUST2021 BS EE

Beacon house School System2017 Alevels

Beacon house School System2015 Olevels

07/2020 Arctan Engineering Solutions11/2020Worked on product development .

SIGMA Lab , SEECS06/2019 08/2019

Worked as a research intern in Machine Learning and Deep Learning.

Technical Deep learning, Digital Marketing

Effective CommunicationSoft Skills

Technical Microsoft Offie, Pspice, Matlab

Management(Human Resources)Soft Skills

RTOS based automatic car navigating simulator.IOT based water level montoring system.IOT based heart rate monitoring system.Edge detection on MATLAB.Vigenere Cypher.

HR Executive at ACM NUST Student Chapter

Chair HR at ACM NUST Student Chapter

Office Bearer at ACM NUST Student Chapter.

Fellow at Team Up Career Launchpad

Scholarship Award in A Levels.

Scholarship Award in O Levels.

Selection in top 50 students in NBTC .

Millennium Fellow at United Nations Academic Impact.

Project Insaniat with Chadar.

Tree Plantation drive with Roshan homes in Sargodha.

Volunteer at SGD Hackathon by Jazz

Muhammad Abdullah [email protected]

https://www.linkedin.com/in/abdullah-tariq-8068a7185/

To obtain a position with a well-established organization in a stable environment that will lead to a lasting relationship in the field of Electrical Engineering. I am looking for a place to use my technical skills, educational background, and abilities to work well with people.

National University of Science and Technology H-12, Islamabad, Pakistan.2021 Bachelors of Science in Electrical Engineering

Islamabad Model College for Boys G-10/4, Islamabad2017 Intermediate

Islamabad Model College for Boys G-10/4, Islamabad2015 Matriculation

From OrganizationTo


OrganizationFrom To


Programming C, C++, Matlab, Python language

Basic Knowledge of ADS, Labview, Atmel Studio, Quartus (vSoftwares

Personal Dilligent, Punctual, Quick to Learn

Good Communicator, Observant, Team Player, FriendlyInterpersonal

Bluetooth controlled car. Heart rate monitoring system.Laser communicationChronographAudio Feature Extraction and Classification on FPGA with Zigbee Interface

Volleyball.Table TennisBook Reading.


Took part in Project Insaniyat. The project was based on string of Food Drives, Donations.


AJWAD FAROOQ

[email protected]

https://www.linkedin.com/in/ajwad-farooq-0852171a4/

A motivated, adaptable and skilled Electrical Engineering Undergraduate who is developing a

mature and responsible approach to any tasks undertaken. Experienced in both software and

hardware, seeking opportunities to polish technical skills further. And to add value to an

organization through sincere efforts and hard work.

National University Of Sciences and Technology, Islamabad.2021 BEE

Fazaia Inter College, Munir Road, Lahore.2016 FSc

Garrison Academy for Boys, Tufail Road, Lahore.2014 Matric

June'18 WWF Eco InternshipAugust'18

- Carrying out research on excess food management by local restaurants.

- Coming up with solutions.

- Presentation of ideas to WWF Management.

ASAS Educational ExpoJuly'19 August'19

- Team lead of Electrical Engineering team.

- Motivating and guiding youngsters in respective fields.

Programming C/C++, Python, MATLAB, Verilog HDL

Quartus, AutoCAD, Advanced System Design, MultiSim.Software

Hardware AVR, Arduino, STM32, FPGA.

Teamwork, Communication, Leadership.Soft skills

- Real time audio feature extraction and classification on FPGA.- Sign Language Recognition using Convolutional Neural Networks in Python.- Automatic Plant Watering and Monitoring System on different platforms i.eArduino, AVR, FreeRTOS.

- Driver Alert System in C++.

- Chess

- 3D Modeling

- Video Editing

- Swimming

- Squash

- Poetry

• Won Gold Medal in Chess at

SEECS.

• Won Squash Gold Medal in

Domestic Tournament held in

Mangla Cantt.

• Qualified for scholarship in

Intermediate, Fazaia College Lahore.

- Project Insaniyat.

- WWF Eco Internship.


Ammaz [email protected]

https://www.linkedin.com/in/ammaz99/

I am a dedicated, organized and methodical individual, able to handle multiple tasks. I have a creative approach for problem solving. I am a good team member. I am enthusiastic to learn and develop new skills. I am reliable & dependable and often seek new responsibilities within a wide range of opportunities. I have an active and dynamic approach to work and getting things done. I am determined and decisive.

SEECS, NUST H-12, Islamabad. ( 3.58 CGPA )2021 BEE

FG Sir Syed College, the Mall, Rawalpindi Cantt. ( 93% )2017 FSc, Pre-En

Fazaia Inter College, Nur khan Airbase, Rawalpindi (95%)2015 Matric

June '19 Realtime Intelligent Secure Computing lab, SEECSOn going

Started as a Research Intern. Learned Digital Design using verilog HDL, and Computer Organization for processor design. Designed RISC-V standard 5 stage pipelined soft core processor on Altera's DE-1 FPGA board.

WWF, Islamabad - Eco Intern.June '18 Aug '18

Worked on a group project titled "Food Waste Management". Proposed certain solutions to current food wastages in restuarants and households of Islamabad / Rawalpindi.

Coding Python, Matlab, C, CPP

Verilog, Altera and Xilinx FPGAsDigital Design

Circuit Design Proteus, PSpice, MultiSim, Logisim

Presentation Skills, Oral and written communicationCommunication

=> Real Time Attendance System Using Facial Recognition on Edge Deivce. => FreeRTOS Emulation of Self Navigating Car. => Hand Written Digit Classifier. => Soft core processor design in Verilog HDL - MIPS and RISC-V. => Smart Street lights using AVR. => Library Management System using CPP Data Structures. => Smart Blind Stick using OOP - on Arduino. => 3D Map of NUST, using AutoCad 2018. => Scientific Calculator in C language.

=> Former Member Organizing Committee – NUST InternationalModel United Nations’19.

=> Former Executive – NUST Trekking Club, NUST Dramatics Club and NUST Technical Amusement Club.

=> Former student ambassador – 6th National Science Bee, 2017.

=> NUST Campus Ambassador –International Science and Youth Symposium, GIKI 2018.

=> Stood 28th / 11059 in Pakistan in 6th International Kangaroo Mathematics Contest.

=> Got 3rd Position in All Pakistan painting Competition organised by Fazaia Schools and Colleges.

=> Former Team member - ProjectInsaniyat.

=> Former Director – TABA YouthChapter NUST.

Saad [email protected]

https://www.linkedin.com/in/saad-nadeem-6126b1165/

To succeed in a stimulating and challenging environment that will provide me with opportunities andhelp me grow, both professionally and personally.

National University of Sciences & Technology (NUST)2021 BEE

APSACS, Gujranwala Cantt2017 HSSC

APSACS, Ordnance Road, Rawalpindi2015 SSC

May 2020 QuoraJuly 2020

Data Analyst: Tagging answers to develop a machine learning dataset torecognize profit affiliation.

RISC Lab, SEECSNov 2019 Jan 2020

Intern: Simulated Implementation of a 5-stage pipelined RISC - V Processor onLogiSIM.Verliog lab exercises on Altera DE10.

Hardware NVIDIA Jetson Nano, FPGAs, AVR, Arduino, STM32F4

MATLAB, PSpice, Quartus II, AutoCAD, LabVIEW, AtmelSoftware

Programming Skills Verilog HDL, C++, Python, HTML/CSS, FreeRTOS

Teamwork, Multi Tasking, Time-Management, CreativitySoft Skills

1. Real-Time Face Recognition based Attendance System using Deep NeuralNetworks on NVIDIA Jetson Nano2.SmartSprout: Automatic Plant Monitoring and Watering using AVR3. 3D Model of NUST- H/12 using AutoCAD4. Travel Site using HTML/CSS

Director Decor - IEEE SEECS

Executive Decor - ACM SEECS

Campus Ambassador - TraValley

Director Decor - Global Village |

- Twice recepient of high achiever'sGPA based scholarship(NUST-SEECS)

- High Achiever's AnnualScholarship (Top 30) forIntermediate Education (FBISE)

- Runner Up Class for ProjectInsaaniyat (Local Food Drive)

- Volunteer at Chadar (Responsiblefor Collection of Clothes andCharity)


MUHAMMAD OSAMA [email protected]

https://www.linkedin.com/in/muhammad-osama-nusrat-834274141/

“Work for an organization which provides me the opportunity to improve my skills and knowledge togrowth along with the organization objective"

SIDDEEQ PUBLIC SCHOOL2014 SSC

HAMZA ARMY PUBLIC SCHOOL AND COLLEGE2016 HSSC

NUST SEECS2021 ENG

Soft Skills Work Ethic

Interpersonal SkillsSoft Skills

Technical Skills Html , Css, Bootstrap, Python , C++, Matlab

Proteus , Citcuit building , PCBsTechnical Skills

BATTERY MANAGEMENT SYSTEM FOR LEO SATELLITESHOSPITAL MANAGEMENT SYSTEMTIC TAC TOEOBJECT DETECTION USING YOLOV5FRONT END WEB PAGE & WEBSITE USING HTML CSS AND BOOTSTRAP

CRICKETGAMINGRESEARCH

FARAZ [email protected]

www.linkedin.com/in/faraz-awan-474547196

Highly motivated Electrical Engineering student with useful knowledge and experience in computer hardware and software domain. I am seeking a challenging position where I can apply my expertise as well as learn and continually grow my career.

National University of Sciences & Technology (SEECS)2021 BE Electrical

Lahore Grammar School2017 A'Level

The Lahore Alma2015 O'Level

01/2020 to 03/2020 Rapidev DMCC (Paid Internship)

Hardware and software development internee.Developed automatic drone detector using deep learning on Jetson Nano.

Programming Python, Tensorflow, C/C++, R, MATLAB, HTML/CSS/JS/PHP

Arduino UNO/Leonardo, AVR, Jetson NANOHardware

Software RStudio, Atmel Studio, Arduino, Git, Proteus, ModelSim

Teamwork, Communication skills, Adaptibility, Work ethicsSoft Skills

Gesture Controller using AVRPrim's & Kruskal Algorithm GUI using Processing IDE (Java)Automatic Plant Monitoring System using Arduino & HTMLCrop Disease Detection using Tensorflow & Android StudioWord Prediction App using RStudio & ShinyGame Wiki Website Development (Online Community Forum)

NUST Robotics Club (NRC)Graphics Executive at NRC

Event orgainzation and management at NUST Science BEE and Olympiad

Outstanding Achievement Award,O'Level

Academic Award, A'Level

Data Science Specialization, JohnHopkins University (Coursera)

Deep Learning Specialization, DeepLearing.AI (Coursera)

Fund raising campaign and mealdistribution for Project Insaniyat, a community service initiative.


Syed Muhammad Izhar [email protected]

https://www.linkedin.com/in/muhammad-izhar-249a0a162

A strong desire of a job where i can demostrate my technical and managemental skills, Implement my ideas and contribute to the company.

NUST( 7 semester, CGPA : 2.56 )2021 BEE

Al Majd International School, Dammam, Saudi Arabia2017 A'levels

New World International School, Dammam, Saudi Arabia2015 O'levels

Oct, 2020 Vice President at Professional Persona Forum(P2F)June 2021We as a society of School of Electrical Engineering and Computer Science(SEECS), NUST work to polish the essential soft skills of students of SEECS that are necessary for a professional work environment.

SEECSSep 2017 Jun 2018

Acted as Batch President in freshmen year, managing a batch of 200 students. Organized an event of food stalls. Other than that i have been in organizing committe of most NUST Events.

Programming C, C++, Matlab

Simulink, AutoCad, LabView, PSpice, MS OfficeSoftwares

Hardwares AVR Microcontroller

Leadership, Management, Street SmartSoft Skills

Optical Character recognition (Final Year Project)Heartbeat sensor project using avr (Plotting FFT in matlab).

Regular at Volleyball, Badminton, Table Tennis, Swimming and Basketball.

Ammature at Lawn tennis, Squash, Cricket and Soccer.

NUST H12 Campus, VIce captain Team volleyball in 2020. Team Captain in 2021.

TV series / Novel Reading.

4 Year Volleyball Champion at SEECS.

Director of the year title at TABA(Media Director)

Best Organizing Skills title at NTAC.

Different perspective approach at project insaniyt(2017)

Running a blog on instagram : howtotreatwomen

Regular visits to Orphanges for charitable interactions.

Usama [email protected]

https://www.linkedin.com/in/usama-ahmad-724915204/

Aiming to utilize my programming and computer hardware expertise in practical and fast-paced environment. My goal is to assume a role in which to apply my skills for a well-respected, innovating company while continuing to improve upon myself.

National University of Science and Technology (SEECS)2021 BE Electrical

Lahore Grammar School2017 A-Levels

The Lahore Alma2015 O-Levels

7/18 Akhuwat8/18

Community ServiceInternee at Clothes BankParticipated in marketing and awareness campaigns

Rapidev PVT Ltd, NSTP NUST10/19 3/20

Hardware team internee. Developed LoRaWAN communication network on STM32 microcontroller for intruder detection application.

Programming Python,C/C++,HTML,R,Verilog,MATLAB

Tensorflow,Keras,PytorchAI/Machine Learning

Hardware AVR, Jetson, STM32, ARM

R Studio, Git, Keil, Arduino. Proteus, Quartus, ModelsimSofware

Path Planning Robot using Arduino and OpenCVGesture Controller using FreeRTOSAutomatic Plant Monitoring System Crop Disease Detection using Tensorflow and Android StudioWebsite development (Online Community Forum)

Nust Robotics Club Director Admin EventsOragnized robotics event during NUST Olympiad and NUST Science BEE

Academic Award in A-LevelsDeep Learning Specialization(Coursera)Data Science by Johns Hopkins University (Coursera)

Participated in fundraising and meal distribution for Project Insaniyat in NUSTCommunity service internship at Akhuwat


Abdul Aziz Chaudhry

[email protected]

https://www.linkedin.com/in/abdul-aziz-chaudhry/

I am a responsible and hard-working individual, exploring dynamic avenues of engineering and

management. Being an Engineering student, with sound problem-solving skills, I love to replace

challenges with creativity. With good leadership and interpersonal skills, I am passionate to grow in

a diverse and inclusive environment.

National University of Sciences and Technology, Islamabad 2021 BEE

Cadet College Hasanabdal 2017 F.SC

Cadet College Hasanabdal 2015 Matric

Sep-2019 Research Assistant - Embedded and IOT Lab - SEECSDec-2020

• Assisting with academic research and preparing materials for grant funding

• Performing market research, attending project meetings, area seminars and

procuring optimized equipment for research purposes.

Saving 9July -2019 Sep-2019

• Researching relevant organizations, initiating contact and setting up/facilitating

meetings for collaborations

• Worked in collaboration with marketing and training department to ensure

product development and expansion of Saving 9 portfolio

Programming C/C++, SQL, MATLAB

PCB designing, EagleCAD, Microcontrollers, IOT Embedded/IOT

Communication Communication and Interpersonal skills

Writing and Editing skills Technical Writing

• Worked on academic projects (Final year, research, and semester projects)

and commercial projects (freelancing client-based projects)

• Presented and published research paper on “IoT and ML enabled Livestock

Monitoring” as first author in HONET 2020 - 17th IEEE International

Conference on Smart Cities: Improving Quality of Life using ICT, IoT and AI.

• Deputy Director NUST DramaticsClub

• Deputy Director NUST LiteraryCircle

• Wing Commander - Cadet CollegeHasan Abdal

• Organizing committee SEECSOpen House

• Editor – Magazine (EnglishSection)

• V.Captain College Football Team• Member of College Cricket Team

• Certificate of Excellence for being

7th in RBISE in SSC Examination

• 3rd in All-Pakistan Bilingual

Declamation (English)

• Microsoft Imagine Cup National

Finalists – 2021

• Microsoft Imagine Cup National

Finalists – 2021

• 2nd Runners Up in Hult Prize

Finals at NUST

• Team Head for Project Insaaniat

• Internship at TCF Citizens

Foundation

• Internship at Akhuwat Foundation

• First-Aid Training at Saving 9

• Mental Health Awareness

Campaign leader as part of

Community service learning

Farheen [email protected]

https://www.linkedin.com/in/farheen-asif-b51616186/

I am interested to wrk for a position in the domain of Artificial Intelligence, optimization, and embedded systems to apply the concepts of Machine Learning and Deep Learning for Hardware interfacing. I am an ambitious, hardworking person aim to work with experienced individuals in a developing atmosphere, who value my integrity and share my passion to achieve higher targets

NUST2021 BEE

Punjab Group of Colleges Lahore2017 HSSC

Himayat-i-Islam Higher Secondary School Lahore2015 SSC

1st May 20 Ecole polytechnique fédérale de Lausanne(EPFL)31st OctobGot selected for MLO lab Summer ResearchInternship with approx. 2% selection rate ,Worked on the data collection of "COVID self-reports based misleading heat maps" and onthe project "DeepChest-Predicting COVID-19from lung ultrasound and auscultationsTU Kaiserslautern Lab-NUST SEECS10th June 23rd March

Worked on hardware acceleration of FPGAsfor the project "Training Aware Quantization ofDeep Neural Networks using brevitas Xilinx".Used Deep Learning based various networkslike inception, LeNet and ResNet. Worked onbinarization and quantization

Software Skills MATLAB ,PLC ,ADS ,Labview ,XILINX Vivado, LINUX, VS, Multisim,IAR Workbench, PsPice, AutoCAD, Quartus II, XILINX SDK

Python, C/C++, HLS, AVR Assembly, HTML, CSS, Verilog/VHDL, Javascript, phpProgramming Langua

Hardware platforms XILINX zc706,PYNQ,Atmel AVR,Stm32,Arduino,ARM Cortex, DAC

Teamwork, Conflict Managemnet, Communication, LeadershipSoft Skills

HLS based implementation of Epileptic seizure detection, Face recognitionthrough Open CV, Smart Cylinder, SAFE TRAVELLERS, Species Recognition using ML , Smart Sprout: Automatic Plant Monitoring and Watering System, Training Aware Quantization of Deep Neural Networks, Crop Data Analysis using Machine Learning Algorithms, Digital Periodic Table

Ambassador Million SmillesVice President ACM-Women NUSTVice President NCBS 2020-21Vice President YPEGricular

Gold Medalist: Academic Excellence Award 2017HARVARD certified: MOOC on Entrepreneurship in Emerging EconomiesIAPR Summer School: event organizer of 3rd IAPR SS on document analysis first time held in PakistanICT Huawei certified: Certified Training on Routing and Switching by Huawei

Write Community Involvements HereChadar Street School VolunteerSponsor A Child, Dir FinanceTCF VolunteerAkhuwat Foundation Volunteer



linkedin.com/in/mshaarif/

Specialize in the field of Power Engineering with focus on transmission system, renewable energy and other sustainable systems by having Industrial experience and continuing studies for in depth knowledge.

SEECS, NUST, Isb, Pakistan.2021 BEE

PISJ-ES, Jed, Saudi Arabia.2016 A levels

AIS, Ynb, Saudi Arabia. 2014 O levels

August Telenor.2020

"Foundations in Design Thinking".

BEE Arduino, Matlab, Pspice, C/C++, Multism.

Team work, entrepreneurship, leadership.Soft skill

1- Cardiac telemetry system: Point of care diagnostic device for Ecg monitoring, analysis and recommendation.

2- Quadcopter: IoT project, designing an UAV using off the shelf hardware.3- Safe wallet: Application.

Blogging, Squash, Cricket.

PISJ-ES award for securingall A grades in As level.

Community service for under developed areas of Islamabad following Covid-19 SOPs.

Ayman [email protected]

https://www.linkedin.com/in/ayman-tanveer-61925b174

Resourceful and dedicated Electrical Engineer adept at short- and long-term electrical systemtroubleshooting who thrives in a fast-paced environment and handles the work of HR, content writer,marketing executive well when required. Able to handle multiple projects simultaneously with highprofessionalism and accuracy.

National University of Science and Technology (NUST)2021 Bachelors

Army Public School and College Sarai-Alamgir2017 HSSC

Army Public School and College Sarai-Alamgir2015 SSC

July 2019 Anzen TechnologiesSep 2019

Worked as an IoT engineering intern. The development of cloud based platformfor various IoT devices manufactured and working on mobile app developmentwere the main tasks.

Minerva PakistanJuly 2020 Sep 2020

Worked as an HR executive. Key responsibilities included aiding in hiring,on-boarding process of interns, managing the performance matrices of otherteams and keeping the talent pipeline warm.

Programming C, C++, Python

LabView, Matlab, Visual Studio,Atmel Studio, HFSSTechnical software

Design software AutoCad , MIT App Developer ,NI Multisim ,Photoshop

Stress management, Team work, Communication skillsSoft Skills

✓ RF energy Harvesting Devices✓ Wireless water quality and level monitoring✓ Non-linear predictive controller of pharmaceutical reactors✓ Home automation system in IoT domain✓ Simulating Islamabad Road Pathways using Data Structures

✓ Science Editor at SpectraMagazine by young engineerscomunity✓ Telenor Design Thinking training✓ Ufone Master Class on MS Excel✓ Content Writer Milestone Zero formarketing of electronic gadgets.✓ Freelancing at Brainly.com asMathematics evaluator

✓18th position in Federal Board,Receiving annual scholarship✓Microsoft Engineering Virtual

Experience Program✓ ‘’Preparing to manage HumanResources’’ -by university ofMinnesota✓ ‘’Supply chain Principles’’-byGeorgia Institute Tech

✓ member to UPG sustainabilityleadership class 2021✓ Community Service at AkuwatFoundation✓ Experience at NUST LITERARYCIRCLE (Human Resources & ER)✓Research of Language Policiesand Delusions in Pakistan✓ member of YPEG women wing


Fiza [email protected]

https://www.linkedin.com/in/fiza-faisal/

Proactive team leader who has led teams of 200+ individuals and managed operations, sponsorships, and marketing of national level events. Gained 1 year of practical experience through Internships, freelancing, projects, and online courses. Looking to work in a dynamic environment that stimulates growth and offers challenges for self-improvement

National University of Science and Technology (NUST) 2021 B.E Electrical

Joint Staff College , Rawalpindi 2017 FSC

Army Public School ,Okara Cantt 2015 Matric

Sept 2020 RezaidOct 2020

Afiniti Aug 2020 Sep 2020

Programming Python, C++, C, MATLAB

PSPICE, ADS, AutoCAD, Streamlit, Microsoft Office,VS Softwares

Soft Skills Leadership, public speaking and conflict managementPresident Orientation of NUST2020

General Secretary at NUST LiteraryCircle (NLC)

Vice President Student GovernmentNUST SEECS

Vice President NUST SummerSchool

UN Millennium fellow 2020 Reckitt Benckiser Global Challenge Campus Finalist Medal of Excellence in Matriculation High Achiever s Certificate in Pre-engineering

Headed a major community service project "Insaniyat' in my university. Collected and managed funds exceeding PKR 1.5 lakh for charity which were later spent on food drives, old age homes, SOS

Daniyal [email protected]

https://www.linkedin.com/in/daniyal-zahid-1156001a4/

To work for a position of Electrical engineer that will enable me to use my strong organizationalskills, award-winning educational background, and ability to work well with people.

National University of Sciences of Technology, Islamabad2021 BEE

Punjab Group of Colleges,Lahore2017 Inter

P.R Railway Boys High School, Lahore2015 Matric

From OrganizationTo


OrganizationFrom To


EE MATLAB

LABVIEWEE

EE Proteus

SEO,SMMDigital Marketing

Water Level Monitoring and Quality Control - FYPUniversity Database System - Semester ProjectSpeed Controller of 3 primary Motors - Semester Project

Digital MarketingPhotographyVideo/Photo EditngGraphics Designing


Media Executive - TABAVolunteer - Nust Community serviceclub


SANA [email protected]

Sana Shakeel

Looking for a innovative workplaceenvironment where I can work with new projects and improve my skill set.

SEECS, NUST2021 BEE

Fauji Foundation College for Girls, New Lalazar, Rawalpindi2017 FSc

Fauji Foundation College for Girls, New Lalazar, Rawalpindi2015 Matric

Blockchain Dapp development, Solidity smart contracts

Adobe Illustrator, Adobe Photoshop, Auto CadDesigning

Miscellaneous MS Word, MS Excel, MS Powerpoint

Blochchain based Smart Energy MeterAtmega16 Smart medicine dispenserIot based Waste Management SystemIot based Home Automation

Environmental Intern at WWf

TABEER [email protected]

https://www.linkedin.com/in/tabeersajjad/

A dedicated Electrical engineering student. Experienced in the domains of Media and Event Management.Seeking to leverage my knowledge and expertise to maximize productivity and quality of Electrical operations.Eager to develop my skill set to improve myself personally and professionally.

NUST H-12 Islamabad2021 BEE

Kinnaird College for Women, Lahore2017 F.Sc. Pre-En

APSACS, Gujranwala Cantt2015 Matrciulation

June 2019 IoT Lab SEECSAug 2019Research Intern - Worked on the design of a smart military jacket.

AfinitiSep 2020 Oct 2020

Software Quality Assurance Intern - Performed Black Box Testing under highly-skilled supervisors.Product - AI Based Customer Service Software

Electrical engineeringPSpice, MATLAB, AutoCAD, Multisim, Verilog, Arduino

C, C++, Python, HTML, CSS, Javascript, PHP, PytorchProgramming

Interpersonal skills Communication skills, presentation skills

MS Office, Photography, Graphic DesigningOther skills

Real-Time Mask Detection (Machine Learning), Quadcopter (ECD), Obstacle avoiding Robot using AVR microcontroller (MPS), 'Huffman tree' (DSA), Hospital maintenance system (DLD), "Battleship game” in C++ (OOP), Wooden bulldozer model (Workshop practice), 3D map of NUST (AutoCAD), 'Tic Tac Toe' game in C.

Organizer at HONET International Conference SEECS 2018Organizer at Open House SEECS Organizer at Convocation SEECS 2019Community Service volunteer and Media Director at TYC, NUSTDirector Media at NUST Leadership SocietyDirector Media in SEECS Student Govt. Association (SGA)Executive at NUST Robotics ClubExecutive at NUST Technical Amusement Club

Achieved 100% scholarship during F.Sc.Class Representative throughout the school tenure. House Captain of the School.Received 100+ certifications at school level

Worked as a volunteer in community service project 'Insaniyat'WWF Eco-Internship


SHER SHAH [email protected]

https://www.linkedin.com/in/sher-shah-120826196/

Seeking employment as an Electrical Engineer to contribute my knowledge and academic skills tothe organizational operations where I can use my leadership qualities and technical skills to theupliftment of the organization as well as for my personal growth.

National University of Science and Technology2021 BEE

F.G.Sirsyed college2016 Fsc

Siddeeq Public School2014 Matriculation

07-2018 Student Government Association SEECS11-2018

Management of all sports activities held at SEECS

Community Service Insaaniyat Project08-2017 12-2017

Aimed at welfare of backward areas of Islamabad

Electrical Power System Analysis and design

Matlab, ProteusElectrical

CS, Software C, C++, Python

AutocadMechanical

Smart Grid Energy Sharing SystemTic Tac Toe gameBall and Beam control systemVoting machine using Microprocessor

CricketHikingRunning

-CRICKETI have represented Islamabad U-16, U19 and senior district team in theyear 2014, 2016 and 2018 respectively. Currently, I am playing for Essco Cricket Club , Islamabad-3RD POSITION IN 1ST YEAR FSCStood 3RD in my college in Fsc 1st year.-INTERNUST CRICKET CHAMPIONS

Part of Insaniyat project aimed at distribution of food, clothing among slums of Islamabad.Qualified Community Services Learning course


FULL NAMEEmail ID [email protected]

LinkedIn ID https://www.linkedin.com/in/syed-saad-303346140/

I strive to keep learning and improving myself and the world around me day after day by trying to be the best possible version of myself

National University of Science and Technology (NUST),Isb2021 BEE

Pakistan School Muscat2017 A levels

Pakistan School Muscat2015 O levels

06/2020 - UN Millennium Campus Fellowship12/2020

During my time as a Millennium Fellow started a grassroots awareness educational opportunities awareness campaign to help students from challenging economic backgrounds

Engineering intern at NBP Head Office Karach06/2019 - 08/2019

While at NBP participated in a study to calculate whether power generated by the available gas generators was going to be cheaper than buying it from the national grid

Engineering Matlab & Simulink

ArduinoEngineering

Social Media Social Media Marketing,Content writing & SEO

Public SpeakingPersonal

Smart Ventilator - for my FYP

Voting machine, Heart rate monitor, Binary to BCD converter

Muscat under 13 cricket championship winners 2012

Really good at FIFA; the best in my class

Straight A's in O levels

Was selected to be a UN MCN fellow and was part of the only batch from Pakistan

Was a founding member for a social media entertainment news startup

Oragnised and participated in blood donation drives organised by Nust Societies.

Oragnised and participated in an HIV and Hepatitis awareness and information session

Syed Saad


HANNAH [email protected]

Hannah Nadeem

I am looking for an opportunity in a reputed organization which will help me deliver my best and upgrade my skills in engineering and meet the demands of the organization.

Siddeeq Public School, Rwp.2014 Matric

Punjab College F-8/4, Islamabad.2017 F.Sc

SEECS-NUST2021 B. Electrical

Jan 2019 AUJ- formula racing PakistanFeb 2020Technical executive particularly concerned with design of power train.

NEPRAApril 2020 July 2020

Printing, assembling and reviewing all the generated liscences for solar net metering.

Blockchain Dapp development, Solidity smart contracts

Adobe photoshop, Auto CADDesigning

Data processing MS word, MS excel, MS powerpoint

Matlab/simulink, LTspice, Proteus, ModelSimSimulation software

- Opencv based face recognition app for security- Opencv based color sorter- Smart medicine dispenser- Water level indicator- Blockchain based smart energy meter

won various arabic and persian calligraphy competitions at matric and intermediate level.

organised various events within university as an HR executive.

Fundraising volunteer at Al-khimdat foundation.

Environmental intern at WWF

Syed Hassaan [email protected]

linkedin.com/in/hassaanmuzammil

I want to advance my AI and Data Science skills by working on cutting edge technology and develop innovative end-to-end solutions.

NUST SEECS2021 BEE

Beaconhouse Margalla Campus2017 A level

Beaconhouse Margalla Campus2015 O level

Oct 2020 Internet of Things Lab, SEECSPresentDeveloping an end-to-end livestock monitoring application. The generic sensor board can be used for other IoT applications providing an open-source hardware platform.

NSTP Hatch-8Feb 2020 Present

Aiming to take the above idea to a full-fledged business prototype ready for the market.

Programming Python, C++, MATLAB, SQL, Git

Specialization (deeplearning.ai)Deep Learning

Data Science Certification (workera.ai)

Azure ML Studio, Power BICloud Computing

- Garment based Motion Capture, RLSA Scanned Document Parameters- Deep Steganography, Flower Classification, YOLO Object Detection, Neural Style Transfer, Spam Email Detection, Brain MRI diagnosis- Water Depth Regulator System, Smart Parking Model - Airport Baggage Management, Roadway Simulation, Game Development

Football:- Co-founder KRL Football Club Jrs.- Beaconhouse Intra Region 2015 Winner, PoTC, Top Scorer- SEECS Futsal League 2019Winner, PoTC, Top Scorer- Gained valuable leadership and teamwork skills.

Other:- Sports (Cricket, Badminton)- Travelling

- Cofounder of start-up: LiveIOT- Runner up: HULT Prize NUST 2020- Microsoft Imagine Cup Finalist- Selected for Hatch-8 NSTP- Presented "IoT & ML enabled Livestock Monitoring" at IEEE HONET 2020

Proactive participation in communal problemsTeachingFootball CoachingMentorship


Muhammad Hassaan [email protected]

https://www.linkedin.com/in/hassaan-yousaf-1942731a4

"For my passion to enhance the mode of travelling, I seek experience in automation and controlprocesses. My aim for my own automobile industry drives my loyalty and passion for the technicalor managerial work for any reputable organization."

KRL Model School Kahuta2014 Science

KRL Model College Kahuta2017 Pre Eng.

NUST2021 EE

2018 Worldwide Wildlife Fund2019

Sub head of food wastage management. Managing and leading the criticalthinker and execution teams assigned for planning, executing and over lookingseveral projects.

Renzyme Lab2020 2021

Working with a professor on basic level C++ programmable projects.

Programming C, C++, Assembly and Python language skills

MATLAB, Simulink, ADS, Proteus, LabView, Pspice, LvdacEE Softwares

Mechanical PCB Designing, Lathe, Wiring, Welding, Forging

Circuit development, Magnetic circuits, Micro ProcessorsEE Designing

Smart Timetable, Smart Attendance, Insignificant Zeroes Reduction, NearestWi-Fi Connection Finder, RPM Detector and Controller, Active Suspension(Prototype), Complete Electric Vehicle Design on Simulink, Active Magneticallylevitated Suspension

Office Bearer at SGA.Treasurer at SGA.Admin Event member at IEEE.Ushers Lead at HONET ICT.Farewell 18 and 19.Welcome 18 and 19.Orientation 18, 19 and 20.Stage technical at NDC.Actor at SEECS Drama Festival.Takra 18 moderator.TUKL Cultural Night management.SEECS Sports festival 18 and 19.SEECS Food festival manager.

Programming for Everybody,Coursera certification.Python Data Structure, Courseracertification.Modern Robotics, Courseracertification.Microsoft Virtual Internship,Microsoftt certification.

AAS(NGO) Embassador fromNUST.(Providing financial support tofamilies reaching out to us)Insaniyat Project Winner in NUST.(Collecting funds of 1 lac. Providingsewing machines, clothes, food,gifts at orphanages, and medicinesto old age homes)Worldwide Wildlife Fund intern.

HUZAIRA [email protected]

linkedin.com/in/huzaira-javed/

I am a target-oriented and motivated student of Electrical Engineering who is seeking to leverageher workaholic nature and active learning skill, to maximize the productivity and quality ofcompany's projects. I have a creative approach for problem solving. I am a highly organized andhard-working individual looking for a responsible position to gain practical experience in a reputableorganization.

SEECS, NUST, Islamabad2021 BEE

Punjab Group of Colleges2017 FSc Pre En

APS (Azam Garrison)2014 Matric

Sep '20 Orenda ProjectOct '20

Worked as Sales Associate in B2C Segment. Achieved sales target. Receivedcommission on sales closed. Got hands-on experience on Leads Squared andZoho Ticketing system. Performed Quality Assurance and Marketing tasks,

WWF-PakistanJun '18 Aug '18

Performed tasks as Eco Intern. Lead my team members in the project titled'Recycling of Plastic'. Installed vertical garden on roadside by reusing plasticbottles. Hosted awareness campaign on recycling of plastic.

Coding Python, Matlab, C, CPP

Proteus, PSpice, MultiSim, LabViewCircuit Design

Digital Marketing Photoshop, Canva, Google Ads, Google Analytics, SEO

Presentation Skills, Verbal and Written CommunicationCommunication

=> Camera based Fish Health Monitoring for Aquaponics => Mask Detectionusing Computer Vision => Water Tank Level Control System => Super SensitiveIntruder Alarm with LM358 => Obstacle Avoiding Robot Car with Atmega16=> Digital Voting Machine in PSpice => Safe Travels App using DSA =>Battleship Game using OOP => Tic Tac Toe in C => NUST Map in AutoCad

What the Scoop: Worked on mystart up ideaSEECS Convocation: FormerMember of Operations TeamNUST Job Fair: Former Member ofManagement TeamNUST Paragliding Club: FormerMember of HR TeamDebating CompetitionArts CompetitionMath Contests

Scholarship Holder: Middle SchoolHigh Achiever Award: High ScoolSilver Medal Hoder: Matric ResultFull Fee Waiver: Intermediate LevelSecond Prize Holder: All NUSTCyclying CompetionBest Deputy Director: TABA YouthChapter NUSTRunner Up Prize: Project Insaniyat

TABA Youth Chapter NUST: FormerDeputy Director Human ResourcesProject Insaniyat: Former TeamMember.Chadar NUST Chapter: FormerVolunteerThe Read Foundation: Former FundRaiserThe Citizen Foundation: FormerSummer InternBlood Donation DrivesTree Plantation Drives


Mannan [email protected]

https://www.linkedin.com/in/mannanrauf/

An Enthusiastic Electrical Engineer eager to contribute to team success through hard work,attention to detail and excellent organizational skills. Excited to use my skillset to bring innovationwith my work. Motivated to learn, grow and excel in Professional career

Pakistan School Muscat-(3 A's)2015 O-Levels

Pakistan School Muscat-(2 A*, 1 A, 2 B)2017 A-Levels

NUST, H-12 (CGPA: 3.47)2021 B.E

06/2019 Internship at Al SAFWAH Engineering and trading LLC07/2019

The company was mainly focused on making of chemicals, providingdisinfecting solutions for its customers. I used to visit different departments ofthe company and I experienced the operation of manufacturing practically.

WWF-Pakistan08/2020 09/2020

I learned about the environmental challenges faced at the globallevel. In addition, we raised awareness regarding the use ofrenewable resources for power generation.

Technical Skills AutoCAD, P SPICE, Verilog, C,C++, LabVIEW, MATLAB

Creative probelm-solving skills, good team-work skillsSoft Skills

Domain Control Systems,Power Electronics,Advanced Ctrl System

Pwr Syst Analysis&Design, Instrumentation&MeasurementDomain

Fault Detection of Actuators (10/2020 - Present)Wind Direction Detector(using digital logic design)Smartphone controlled Alarm clock(AVR microcontroller)Hospital Management System(C++), NUST 3D Map(Using AutoCAD)Controlled liquid monitoring using IoT(Node MCU),Controller Design Using LQR

1) Won the semi-finals of Tugof War during SEECSsports gala 2020.

2) Table-tennis winner inAnnual sports gala at mycollege

1)Award of Scholarship at PSM:Ireceived scholarship due to 1stposition at AS-level, with 50%fee waived off for one full year

2) Completed a one-day workshopof Foundations in Design Thinking,Telenor

1) I was the Headboy of my College,and I used to represent my collegeat Ceremonies and Events

2) Marketing Executive of IEEE andACM society: I was responsible toimplement the marketing strategyof the events in society. I have donevoluntary work in events likeIoT week, Wie collaboration etc

Muhammad Mubashir [email protected] , [email protected]

www.linkedin.com/in/muhammad-mubashir-ahmed-51896a199

Growing and enhancing my skills set and/by adding value to my company through innovation, creativity, problem-solving and trouble shooting by working in an optimistic organizational culture.

NUST (Seventh Semester, CGPA : 2.76)2021 BEE

Pakistan School Muscat (PSM), Sultanate of Oman - A, B2017 A Level

Pakistan School Muscat (PSM), Oman - 1 A*, 2 A's, 2 B's2015 O Level

Oct, 2020 Founder & President-Professional Persona Forum (P2F)Jun, 2021

We as a society of School of Electrical Engineering and Computer Science(SEECS), NUST work to polish the essential soft skills of students of SEECS that are necessary for a professional work environment.

Youth Entrepreneural Society (YES)Sept, 2019 Aug, 2020

Worked as the Executive (HR), Director (HR) and Head of Events to introduce young talents of School of Electrical Engineering and Computer Science (SEECS), NUST to the entrepreneurial world of Pakistan.

Programming C, C++, Matlab

Simulink, AutoCad, LabView, PSpice, MS OfficeSoftwares

Hardware ESP32, AVR Microcontroller

Marketing, Public Speaking, LeadershipSoft Skills

Smart Microgrid Energy Management System (Final Year Project)Super Store Management using CWind Direction Detector using Digital Logic DesignSmart Phone controlled Alarm Clock using AVR Microcontroller

Basketball Captain at School

Cricket

Soccer

Jogging

Stood 1st in School, 26th in Islamabad and 92nd in Pakistan in the International Kangaroo Mathematics Contest (IKMC) 2013

Stood 2nd in Speak Up 1.0 and Speak Up 2.0(Speech Competitions held at University)

Member of Speakers Pool, SEECS Declamation Chapter

Project Insaniyat (2017)


Muhammad Faraz Ul [email protected]

https://www.linkedin.com/in/muhammad-faraz-ul-abrar-0471321a1/

A reliable ,motivated and co-operative Electrical Engineer who is always eager to learn new thingsto their depth and work hard to handle upcoming challenges by applying acquired skills especially inthe domain of Communication, Networking and IOT, and has convincing Interpersonal skills.

SEECS, NUST2021 BEE

PUNJAB COLLEGE, BLUE AREA Islamabad.2017 FSc

Islamabad Model College of Boys2015 Matric

02/2020 Information Processing & Transmission(IPT) Lab SEECSPresent

• Research and Development of a Device to Device (D2D) Mobile Ad-hocNetwork on Android using Bluetooth Low Energy (BLE) and WiFi-Direct.

Programming C++, Java, MATLAB, Python and Android

WiFi, WiFi-Direct, Bluetooth Low Energy (BLE)IoT & Networking

Hardware ATmega32, FPGA

PSpice, Proteus, Xilinx, Atmel StudioSimulations

• Device to Device (D2D) Communication Ad-Hoc Network on Android usingBLE and WiF-Direct• Garment Reconstruction using Color Coded Technique for Feature Matching• Real Time Smart Traffic Management system using ATmega 32• Real time visualization & monitoring of Motion and Temperature via MPU 6866

• Table Tennis

• Dota 2

• All Pakistan NUST Table TennisChampion

• NUST H-12 Table TennisTournament Winner

• Interviewed various organizationsfor Communication Skills Project

• Participated in NUST Olympiadand various E-gaming tournaments


www.linkedin.com/in/muhammad-talha-b048091a0

A reliable Electrical Engineer looking forward to help huan community by gaining the insight knowledge of Communication, IoT and Embedded Tech.

F.G Boys Secondary School Mehfooz Road RWP2015 Matriculation

F.G Sir Syed College The Mall Road RWP2017 Pre-Eng

School of Electrical Engineering and Computer Sciences2021 BEE

Mar 2020 IPT Lab Seecs, NustPresentDevelopment of D2D heterogeneous network for Disaster managment using Bluetooth Low Energy(BLE) and Wi-Fi

Programming Java, Python, C++, C

Bluetooth Low Energy(BLE), Wi-Fi, Wi-Fi DirectIoT/Communication

Hardware Atmega32, Arduino, FPGA

Matlab, Atmel Studio, XilinxSimulation

Design of D2D Heterogeneous Network For Disaster Management using Ble and Wi-FiGarment Reconstruction using Color Coded technique for Feature MappingReal Time Smart Traffic management using Atmega16

E- Sports

Table Tennis

All Punjab 3rd Position in English Essay Competition

NGo (Red Crescent Org) Interview regarding Humar Resource Project


Muhammad Salman [email protected]

https://www.linkedin.com/in/muhammadsalmanafzal/

Deterministic and passionate individual, proficient in hardware circuits design using Verilog orSystem Verilog and currently working on Verification of RISCV based designs. I’ve also worked onembedded microcontrollers like ARM. My goal is to bring the semi-conductor industry to our countryand make it independent. I hope to work in a friendly yet competitive environment that enables youto do more.

National Institute of Sciences & Technology, Islamabad'21 BS Electrical

Punjab College of Science, Faisalabad'17 FSc

Divisional Public School & College, Faisalabad'15 Matric

June'19 Summer Intern | RISC Lab, SEECS, NUSTAug'19

--Learn about Verilog as Hardware Descriptive Language--Implement general Hardware problems in Verilog--Learn about Hardware designing of RISC-V ISA--Implementing a general purpose parameterized RISC-V core in Verilog andLogisim

Freelancer | FiverrSep'19 Sep'20

--Work related to Computer Architecture of MIPS and RISC-V ISA--Digital Logic and System Designing in Verilog and SystemVerilog--Work closely with clients to collect requirements and ensure quality

Programming Verilog, SystemVerilog, Python, C/C++, MATLAB, Arduino

Quartus, Modelsim, Git, Multisim, Proteus, LogisimDev. Tools

Boards Altera DE1, Arduino(UNO, DUE-M3), NodeMCU, STM32

Problem Solving, Team Work, Self Motivation, ReliableSoft Skills

--RISC-V Core in Verilog--FreeRTOS Simualtion of Self-Navigating Vehicle--Suspension System of Vehicles in MATLAB--Home Automation System using ARM M3--3D Model of NUST in AutoCad--Banking Management System in C++ using OOP

--HR Director | NUST StudentForum, SEECS

--Admin Executive | NUST RoboticsClub

--Marketing Executive | YouthEntrepreneurial Society, SEECS,NUST

--HR Executive | TABA YouthChapter, NUST

--2nd Position | FSc. BISEFaisalabad

--3rd Position | Matric BISEFaisalabad

--Volunteer | Froods

--Summer Internship | AkhuwatFoundation, Faisalabad

Nayab [email protected]

Nayab Tajved

To be a part of a stable organisation where I can create impact on society and our communitythrough effective policy making. Furthermore, to enhance my problem solving skills and createeffective workflow between organisations and systems.

SEECS, NUST H12, Islamabad.2021 BE EE

APSACS, Hamayun Road, Rwp.2017 F.Sc

Bahria Foundation College, Westridge, Rwp.2015 Matric

June '19 TUKL-NUST R&D CenterApril '20

Research Intern - Studied Deep Learning and its applications, automated thetask of downloading videos from 850+ individuals to curate a dataset forUrdu-speaking people, got hands-on exp. of various CNN architectures.

UpworkJuly '20 Present

Freelancing - Completed different projects ranging from designing and creatingtutorials, proofreading/editing to working on embedded systems based projects.

Programming Python, Matlab, C/C++

PyTorch, Tensorflow, OpenCV, CNNs, PandasMachine Learning

Software AutoCAD, Atmel, FreeRTOS, EAGLE

MS Office, Version Control using Git, Linux, Video CreationMisc.

Cardiax - Smart Heart Rate Monitoring SystemSmart Home Managament SystemDisaster Management System using FreeRTOSMusic Library with Optimised Searching Algorithm

- Runner-Up in WWF EnvironmentalContest- Participated in National ElectronicsOlympiad- Chef Course from PC, Rawalpindi- Other interests include economics,psychology and internationalrelations

I can raise and lower my anxiety atwill, how's that?

- Volunteer at blood donationCamps- Volunteer at SOS Village, SoanCampus- Collected funds under the InsaniatProject


Shaheer [email protected]

https://www.linkedin.com/in/shaheer-sajid-767a9a10b

An engineer seeking to gain employment with a company or institution that offers a consistently positive atmosphere to learn new technologies and implement them for the betterment of the business. My partiular areas of interest are SoC design, soft processor design and FPGA based applications. Moreover I am also interested in IOT and embedded systems design. I feel I can give my best in the above mentioned fields

National University of Sciences and Technology (SEECS)2021 BS Electrical

Lahore Grammar School2017 A-Levels

Lahore College of Arts and Sciences2015 O-Levels

06/2018 Makistan ITU, Arfa Kareem Tower08/2018

Build a working prototype of an automated indoor gardening system.See more athttps://tinyurl.com/ukzupwya

Rapidev PVT Ltd, NSTP NUST06/2019 06/2020

Design and fabricate down to the PCB an ARM based LoRa mesh networking system that remotely controls and monitors street lights.

Hardware Soldering, PCB design and fabrication

C/C++, Python, Verilog, MATLAB, JavaProgramming

Boards AVR, Jetson, ESP8266, FPGA, ARM

Keil, Arduino, Atmel Studio, Eagle, Proteus, QuartusSoftware

Dynamic Obstacle Avoidance using Efficient Computer VisionRISCV Soft Processor (https://github.com/ShaheerSajid/RISCV)Indoor plant monitoring and care systemWater Management System for Public WashroomsOpenCV Maze Solving Algorithm (https://bit.ly/308Ucs8)

President NUST Robotics ClubRobotics event head NUST OlympiadRobotics event head NUST Science BEE

Academic student of the year in O-LevelsWinner at ISSDC NASA 2016Runner up Speed Soldeing FAST IEEE 2016Winner PCB Design and Runner up Line Following GIKI NEO2018

Basic Science Skills Workshop at an under privileged school in collaboration with TABA youth Chapter NUST

Fund raising campaign and distribution of meals


Somia NasirEmail ID : [email protected]

LinkedIn ID : linkedin.com/in/somia-nasir-4179971a3

To secure a challenging position in a reputable organization to expand my learnings, knowledge,and skills and to make use of my interpersonal skills to achieve goals of a company that focuses oncustomer satisfaction and customer experience.

National University of Sciences and Technology (NUST)2021 BS. Electrical Engineering

Army Public School and College System2017 HSSC

Army Public School and College System2015 SSC

10/2020 The CDR ConsultantsPresent

Technical Writer

Afiniti08/2020 09/2020

Software Quality Assurance Intern

Programming lang C, C++, Dart (Flutter for App Development)

MATLAB, LabVIEW, AutoCAD, Proteus, Atmel StudioSoftware

Hardware Verilog HDL, FPGA

EI, Interpersonal, Communication and Analytical skillsSoft Skills

Sweat based Medical Diagnostic device [FYP], RISC-V Core implementation onFPGA, Solar Tracking System using Arduino , Smart Sprout: Automatic PlantMonitoring and Watering, Auto Home, Bank Management System using C++,Ludo (board game) using C, Matrix Calculator, 3D Map of NUST using AutoCAD

Badminton,Table Tennis

AWS Community Member Pakistan

Umair [email protected]

https://www.linkedin.com/in/umair-raza-053a02173/

Seeking an electrical engineer position to utilize my expertise in the field of electrical engineeringand learn innovative skills.

National University of Science and Technology, Islamabad2021 BEE

Government College University, Lahore2017 Pre-Eng

Government High School Chauburji Gardens, Lahore2015 Matric

07/2019 Descon Engineering Limited08/2019

During my internship, my task is to make excel sheets of tenders relevant to thecompany. Moreover, i learned the whole process of bidding and major contentsof a bid.

Akhuwat Foundation07/2018 08/2018

During my internship period, i visited various garments markets of Lahore forclothes collection drives and awareness drives.

Electrical Engineeri MATLAB

ProteusElectrical Engineeri

Management MS Office

Adobe Illustrator, Adobe PhotoshopGraphic Designing

Digital Election System in C- language (1st Semester)Game on unity developer (2nd Semester)Digitized Clock (3rd Semester)Outdoor Map Building for Autonomous Navigation (Final Year Project)

Graphic DesigningMentor Graphics-IEEEExecutive Graphics-NEC

Project Insaniyat (2017)Internship at Akhuwat Cloth Bank(2018)


Usman Khawar

[email protected]

https://www.linkedin.com/in/usman-khawar-88a8a3186/

An independent and self-motivated electrical engineer with excellent academic and co-curricular

achievements. With proven technical and interpersonal skills, looking to work in a growth based

atmosphere with an emphasis on self-improvement.

National University of Sciences & Technology 2021 B.EE

Al-Aqeeq International College2017 FSc.

Al-Aqeeq International School2015 Matric

Aug,2019 DELTASep,2019

Installation of underground power transmission cables.

Collaborated in a mega-project of nine grid stations' expansion under Saudi

Electricity Company (SEC).

Rohde & SchwarzApr,2019 Jul,2019

Conducted research to improve filter testing and measurements of amplifier

non-linearities.

Won first position for the presented solution and research.

Circuit Design Proteus, Simulink, Advanced System Design, Multisim.

Python, R, MATLABProgramming

Technical Writing Report writing, Research Writing, Literature Review

Presentation Skills, Project Management, Risk Assessment.Soft Skills

Real-time System for Deforestation Detection using Machine Learning on

low-powered Embedded Nodes.

Smart Street Lights System based on Vehicle movement.

Measuring the Nonlinearities of RF Amplifiers and Filter Testing using Vector

Network Analyzer.

Unilever Talent Hunt'20 - National

Finalists

NUST Archery Club - Director

Security

NUST Technical Amusement Club -

Director Establishment & Protocol

SEECS OpenHouse'18 - Executive

Judges

Recipient of Semester Scholarship

(2018-2020)

High Achiever SEECS (2018 &

2020)

Best Presentation Award - Rohde &

Schwarz (2019)

Dean's Appreciation Certificate -

Academic Excellence (2018)

Football Gold Medalist (2014)

NCSC Blood Donation Drive (2019)

TABA Clothes Donation Drive (2018)

Project Insaniyat (2017) - Team

Member

Usman Ahmad [email protected]

linkedin.com/in/usman-siddiqui-1a21021ab

To obtain a challenging position in a fast moving and innovative market where I can leverage my strong leadership experience and academic skills to effect change, seek impact, and improve myself by learning alongside brilliant people and great brands.

National University of Sciences and Technology (3.48)2021 SEECS

Super Nova College (4 A*s)2017 A Levels

Super Nova College (7 A*s and 3 As)2015 O Levels

08/2020 IoT Lab SEECS, NUSTPresentResponsible for research into cutting-edge sensor technologies and building working project prototypes.

Oil and Gas Development Company Limited (OGDCL)06/2019 07/2019

In charge of a team of 3, assigned to the wire logging and data collection unit.

Programming/ Office C/C++, Python, MATLAB, Word, PowerPoint, Excel, UX/UI

Critical Thinking, Conflict Resolution, Empathetic ListenerSoft Skills

Embedded Systems FreeRTOS, Data Structures and Algorithms

Deep Learning and Machine LearningArtificial Intelligence

1- Automated Multisensor Board for ML and IoT Enabled Livestock Monitoring (FYP).2- Object Edge recognition using AVR Microcontrollers3- Library Management System in C++4- Water Quality Monitoring and Control System

Working on building a Startup. Currently in pre-incubation stage at NSTP, NUST, H-12, Islamabad

Fantasy Premier League Discord Community

Languages: English, Urdu, SpanishEager to learn many languages

Winner | Hatch-8 Pre-Incubation, NSTP, NUST

Pakistan Finalist | Microsoft Imagine Cup 2021

2nd Runners Up | HULT PRIZE 2020, NUST

Volunteer | Project InsaniyatClass effort to carry out Donation Drive for disadvantaged communities.

Volunteer | WWF PakistansRaised climate change and wildlife conservation awareness.

Page No. 145 | BEE - Graduate Profile Booklet 2021

page no. 1 | bee - graduate profile booklet 2021

Documents