(page.1/31) service bulletin a3hm-2016 (g040)mserviceportal.kdkr.co.kr/service bulletin/sb/2016...
TRANSCRIPT
-
(Page.1/31)
Service Bulletin Ref. No. A3HM-2016 (G040) [Parts Change Information] December 9, 2016
KYOCERA Document Solutions Inc.
A B C
Subject: Parts Change Information
A3HM Model:
TASKalfa 2552ci, TASKalfa 3252ci,
TASKalfa 3552ci, TASKalfa 4052ci, TASKalfa 5052ci, TASKalfa 6052ci,
TASKalfa 4002i, TASKalfa 5002i, TASKalfa 6002i
TASKalfa 8052ci, TASKalfa 7052ci, TASKalfa 8002i, TASKalfa 7002i
TASKalfa 7551ci, TASKalfa 6551ci, TASKalfa 8001i, TASKalfa 6501i,
TASKalfa 5551ci, TASKalfa 4551ci, TASKalfa 3551ci, TASKalfa 3501ci,
TASKalfa 5501i, TASKalfa 4501i, TASKalfa 3501i,
TASKalfa 7550ci, TASKalfa 6550ci, TASKalfa 8000i, TASKalfa 6500i,
TASKalfa 5550ci, TASKalfa 4550ci, TASKalfa 3550ci, TASKalfa 3050ci,
TASKalfa 5500i, TASKalfa 4500i, TASKalfa 3500i,
FS-C8650DN, FS-C8600DN,
TASKalfa 750c, TASKalfa 650c, TASKalfa 550c,
DP-7100, DP-7110, DP-7120, DP-770/DP-770(B), DP-771, DP-772,
DT-730/DT-730(B), PF-7100, PF-7110, PF-7120, PF-730/PF-730(B),
PF-740/PF-740(B), PF-770, PF-780/PF-780(B), DF-7100, DF-7110,
DF-7120, DF-770/DF-770(B)/DF-770(C)/DF-770(D),
DF-790/DF-790(B)/DF-790(C), BF-730, MT-730/MT-730(B),
PH-7100/7120/7130, PH-7A/7C/7D, JS-730, JS-731, JS-732,
FAX System 12, FAX System(V), FAX System(W), AK-7100, AK-730,
AK-735, AK-731, AK-736, Printing System 15 --- All models Subject Refer to the last page for the affected model list of the enhancement unit or the option. details: Revised
contents Ver.05
Upgrade: The contents of Ver.05 are newly added. Accordingly, the contents in the cover (from Subject to Index) are added and corrected and the layout is changed.
Index: (Ver.05) Page 6 Common use of the part (PLATE CONT DRIVE)
TASKalfa 8052ci, TASKalfa 7052ci, TASKalfa 7551ci, TASKalfa 6551ci, TASKalfa 8001i, TASKalfa 6501i, TASKalfa 5551ci, TASKalfa 4551ci, TASKalfa 3551ci, TASKalfa 3051ci, TASKalfa 5501i, TASKalfa 4501i, TASKalfa 3501, TASKalfa 7550ci, TASKalfa 6550ci, TASKalfa 8000i, TASKalfa 6500i, TASKalfa 5550ci, TASKalfa 4550ci, TASKalfa 3550ci, TASKalfa 3050ci, TASKalfa 5500i, TASKalfa 4500i, TASKalfa 3500i, FS-C8650DN, FS-C8600DN
Page 6 Common use of the part (MOUNT PWB MAIN) PF-740/PF-740(B), TASKalfa 7551ci, TASKalfa 6551ci, TASKalfa 8001i, TASKalfa 6501i
Page 7 Revision of the Installation Guide
FAX System 12, PF-7120, DF-7110, Printing System 15
-
(Page.2/31)
Service Bulletin Ref. No. A3HM-2016 (G040) [Parts Change Information] December 9, 2016
KYOCERA Document Solutions Inc.
A B C
Index: (Ver.04) Page 8 Improving the paper conveying performance
(Change of the shape of MOUNT SENSOR) TASKalfa 2552ci, TASKalfa 3252ci, TASKalfa 3552ci, TASKalfa 4052ci, TASKalfa 5052ci, TASKalfa 6052ci, TASKalfa 4002i, TASKalfa 5002i, TASKalfa 6002i
Page 8 (For UTAX/TA) Change of the label affixed on the toner kit master carton (Adding the weight indication)
TASKalfa 2552ci, TASKalfa 3252ci Page 9 Change of the fuser drive section
TASKalfa 2552ci, TASKalfa 3252ci, TASKalfa 3552ci, TASKalfa 4052ci, TASKalfa 5052ci, TASKalfa 6052ci, TASKalfa 4002i, TASKalfa 5002i, TASKalfa 6002i
Page 9 (For UTAX/TA and OLIVETTI) Registration of the power cord
TASKalfa 2552ci, TASKalfa 3252ci, TASKalfa 4052ci, TASKalfa 5052ci, TASKalfa 6052ci, TASKalfa 4002i, TASKalfa 5002i, TASKalfa 6002i
Page 10 Change since the first mass-production
TASKalfa 3552ci, TASKalfa 4052ci, TASKalfa 5052ci, TASKalfa 6052ci Page 10 Easy assembly work (Change of COVER TRAY BASE)
TASKalfa 2552ci, TASKalfa 3252ci, TASKalfa 3552ci, TASKalfa 4052ci, TASKalfa 5052ci, TASKalfa 6052ci, TASKalfa 4002i, TASKalfa 5002i, TASKalfa 6002i
Page 11 Common use of the parts
TASKalfa 3552ci, TASKalfa 2552ci, TASKalfa 6052ci, TASKalfa 5052ci, TASKalfa 4052ci, TASKalfa 3552ci, TASKalfa 6002i, TASKalfa 5002i, TASKalfa 4002i
Page 12 (For KDCN/KDTW) Change since the first mass-production
DP-7120, DP-7100, DP-7110 Page 12 Change of the component parts of the PF conveying cover assy
PF-7100, PF-7110 Page 13 Revision of the UL leaflet and Installation Guide for FAX System 12
DF-7100, DF-7110, DF-7120, AK-7100, FAX System 12 Page 14 (For Metric spec) Common use of the part
DF-7110 Page 14 Change of GUIDE HOOK
DF-7100 Page 15 (For KDAU) Change of the FAX modular cord
All main units with FAX
Page 15 (For KDTW) Disuse of the Taiwan Energy Mark label TASKalfa 5551ci, TASKalfa 3551ci, TASKalfa 5501i, TASKalfa 4501i, TASKalfa 4551ci, TASKalfa 3051ci
-
(Page.3/31)
Service Bulletin Ref. No. A3HM-2016 (G040) [Parts Change Information] December 9, 2016
KYOCERA Document Solutions Inc.
A B C
Index: (Ver.04) Page 15 Common use of the part (PLATE NUT M3)
FS-C8650DN, FS-C8600DN (Ver.03)
Page 16 Changing the damper material of the motor from resin to metal DP-7120
(Ver.02)
Page 17 Changes from the first mass-production PF-7110, DP-7100, TASKalfa 2552ci, TASKalfa 3252ci, TASKalfa 3552ci, TASKalfa 4052ci, TASKalfa 5052ci, TASKalfa 6052ci, TASKalfa 4002i, TASKalfa 5002i, TASKalfa 6002i
Page 17 Improving the margin for the detection ability of the registration switch (Disusing the cushion)
DP-7100 Page 18 Common use of the part (HOUSING CIS)
DP-772, TASKalfa 7551ci, TASKalfa 6551ci, TASKalfa 8001i, TASKalfa 6501i
Page 18 Common use of the part (COVER INNER)
TASKalfa 8001i, TASKalfa 6501i, TASKalfa 8000i, TASKalfa 6500i
Page 19 Common use of the part (Changing the IH unit)
TASKalfa 8001i, TASKalfa 6501i
Page 19 Changing the motor TASKalfa 7551ci, TASKalfa 6551ci, TASKalfa 7550ci, TASKalfa 6500ci, TASKalfa 5551ci, TASKalfa 4551ci, TASKalfa 3551ci, TASKalfa 3051ci, TASKalfa 5550ci, TASKalfa 4550ci, TASKalfa 3550ci, TASKalfa 3050ci, FS-C8650DN, FS-C8600DN, TASKalfa 8001i, TASKalfa 6501i, TASKalfa 8000i, TASKalfa 6500i, TASKalfa 5501i, TASKalfa 4501i, TASKalfa 3501i, TASKalfa 5500i, TASKalfa 4500i, TASKalfa 3500i
Page 20 Common use of the part (FRAME FRONT FUSER B) TASKalfa 7551ci, TASKalfa 6551ci, TASKalfa 7550ci, TASKalfa 6550ci, TASKalfa 8001i, TASKalfa 6501i, TASKalfa 8000i, TASKalfa 6000i
Page 20 Common use of the part (MOUNT CLEANER REGIST) TASKalfa 8001i, TASKalfa 6501i, TASKalfa 5501i, TASKalfa 4501i, TASKalfa 3501i, TASKalfa 8000i, TASKalfa 6500i, TASKalfa 5500i, TASKalfa 4500i, TASKalfa 3500i
-
(Page.4/31)
Service Bulletin Ref. No. A3HM-2016 (G040) [Parts Change Information] December 9, 2016
KYOCERA Document Solutions Inc.
A B C
Index: (Ver.02) Page 21 Common use of the part (FRAME MIDDLE FEED)
TASKalfa 7551ci, TASKalfa 6551ci, TASKalfa 8001i, TASKalfa 6501i, TASKalfa 5551ci, TASKalfa 4551ci, TASKalfa 3551ci, TASKalfa 3051ci, TASKalfa 5501i, TASKalfa 4501i, TASKalfa 3501i, TASKalfa 7550ci, TASKalfa 6550ci, TASKalfa 8000i, TASKalfa 6500i, TASKalfa 5550ci, TASKalfa 4550ci, TASKalfa 3550ci, TASKalfa 3050ci, TASKalfa 5500i, TASKalfa 4500i, TASKalfa 3500i, FS-C8650DN, FS-C8600DN
Page 21 Changing the HDD fixing pins TASKalfa 7551ci, TASKalfa 6501i, TASKalfa 8001i, TASKalfa 6501i, TASKalfa 5551ci, TASKalfa 4551ci, TASKalfa 3551ci, TASKalfa 3051ci, TASKalfa 5501i, TASKalfa 4501i, TASKalfa 3501i, TASKalfa 7550ci, TASKalfa 6550ci, TASKalfa 8000i, TASKalfa 6500i, TASKalfa 5550ci, TASKalfa 4550ci, TASKalfa 3550ci, TASKalfa 3050ci, TASKalfa 5500i, TASKalfa 4500i, TASKalfa 3500i, FS-C8650DN, FS-C8600DN
Page 22 Common use of the parts (Changing the motors) PF-740/PF-740(B), PF-730/PF-730(B), PF-780/PF-780(B), PF-770, BF-730, TASKalfa 7551ci, TASKalfa 6551ci, TASKalfa 8001i, TASKalfa 6501i, TASKalfa 5551ci, TASKalfa 4551ci, TASKalfa 3551ci, TASKalfa 3051ci, TASKalfa 5501i, TASKalfa 4501i, TASKalfa 3501i, TASKalfa 7550ci, TASKalfa 6550ci, TASKalfa 8000i, TASKalfa 6500i, TASKalfa 5550ci, TASKalfa 4550ci, TASKalfa 3550ci, TASKalfa 3050ci, TASKalfa 5500i, TASKalfa 4500i, TASKalfa 3500i, FS-C8650DN, FS-C8600DN
Page 22 Common use of the part (COVER INNER UPPER)
DF-790/DF-790(B)/DF-790(C)
Page 23 Common use of the part (Changing the shape) DF-790/DF-790(B)/DF-790(C), DF-770/DF-770(B)/DF-770(C)/DF-770(D)
Page 23 Common use of the part (BRACKET:BRKT-CAM-TR2-F) TASKalfa 750c, TASKalfa 650c, TASKalfa 550c
Page 24 Changing the operation PWB TASKalfa 750c, TASKalfa 650c, TASKalfa 550c
Page 24 Part Number Information TASKalfa 750c, TASKalfa 650c, TASKalfa 550c
Page 25 Easy parts procurement All models
-
(Page.5/31)
Service Bulletin Ref. No. A3HM-2016 (G040) [Parts Change Information] December 9, 2016
KYOCERA Document Solutions Inc.
A B C
Index: (Ver.01) Page 26 Common use of the parts (GUIDE FFC BRIDGE)
TASKalfa 7551ci, TASKalfa 6551ci, TASKalfa 7550ci, TASKalfa 6550ci, TASKalfa 5551ci, TASKalfa 4551ci, TASKalfa 3551c, TASKalfa 3051ci, TASKalfa 5550ci, TASKalfa 4550ci, TASKalfa 3550ci, TASKalfa 3050ci
Page 26 Changing the material of the guides TASKalfa 7550ci, TASKalfa 6550ci, TASKalfa 8000i, TASKalfa 6500i, TASKalfa 5550ci, TASKalfa 4550ci, TASKalfa 3550ci, TASKalfa 3050ci, TASKalfa 5500i, TASKalfa 4500i, TASKalfa 3500i, FS-C8650DN, FS-C8600DN
Page 27 Changing the damper inside the motor (Resin to Metal) DP-772, DP-771, TASKalfa 7551ci, TASKalfa 6551ci, TASKalfa 8001i, TASKalfa 6501i, TASKalfa 7550ci, TASKalfa 6550ci, TASKalfa 8000i, TASKalfa 6500i, TASKalfa 5551ci, TASKalfa 4551ci, TASKalfa 5501i, TASKalfa 4501i, TASKalfa 5550ci, TASKalfa 4550ci, TASKalfa 5500i, TASKalfa 4500i, FS-C8650DN, FS-C8600DN
Page 28 Changing the packing of the primary paper feed unit for service PF-730/PF-730(B), PF-780/PF-780(B), TASKalfa 7551ci, TASKalfa 6551ci, TASKalfa 8001i, TASKalfa 6501i, TASKalfa 5551ci, TASKalfa 4551ci, TASKalfa 3551ci, TASKalfa 3051ci, TASKalfa 5501i, TASKalfa 4501i, TASKalfa 3501i, TASKalfa 7550ci, TASKalfa 6550ci, TASKalfa 8000i, TASKalfa 6500i, TASKalfa 5550ci, TASKalfa 4550ci, TASKalfa 3550ci, TASKalfa 3050ci, TASKalfa 5500i, TASKalfa 4500i, TASKalfa 3500i
Page 29 (For KDAU) Changing the Australian line standard certification label FAX SYSTEM(W)
-
(Page.6/31)
Service Bulletin Ref. No. A3HM-2016 (G040) [Parts Change Information] December 9, 2016
KYOCERA Document Solutions Inc.
A B C
(Ver.05-P1; 2016/11)
Subject: Common use of the part (PLATE CONT DRIVE)
Model:
TASKalfa 8052ci, TASKalfa 7052ci,
TASKalfa 7551ci, TASKalfa 6551ci, TASKalfa 8001i, TASKalfa 6501i,
TASKalfa 5551ci, TASKalfa 4551ci, TASKalfa 3551ci, TASKalfa 3051ci,
TASKalfa 5501i, TASKalfa 4501i, TASKalfa 3501,
TASKalfa 7550ci, TASKalfa 6550ci, TASKalfa 8000i, TASKalfa 6500i,
TASKalfa 5550ci, TASKalfa 4550ci, TASKalfa 3550ci, TASKalfa 3050ci,
TASKalfa 5500i, TASKalfa 4500i, TASKalfa 3500i, FS-C8650DN, FS-C8600DN Implementation: After using up the old stock
PLATE CONT DRIVE (No.1) is changed as follows for common use of the part.
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 302K931720 2K931720
302K931721 2K931721
PLATE CONT DRIVE *1 *1 O O
*1: All the q'ty to use is changed.
Note: TASKalfa 8002i/7002i have used the new part since the first-mass production.
N00092681 A3HM_ IPCI No.000204
Subject: Common use of the part (MOUNT PWB MAIN)
Model: PF-740/PF-740(B),
TASKalfa 7551ci, TASKalfa 6551ci, TASKalfa 8001i, TASKalfa 6501i Implementation: After using up the old stock
MOUNT PWB MAIN (No.1) is changed as follows for common use of the part.
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 303NF39051 3NF39051
303NF39052 3NF39052
MOUNT PWB MAIN 1 1 O O
Note: TASKalfa 8052ci/7052ci and TASKalfa 8002i/7002i have used the new part since the first-mass production.
N00092683 A3HM_ IPCI No.000203
The hole is added.
The dowel is added to the backside.
Burring is added to the screw holes.
The cut-out is added.
-
(Page.7/31)
Service Bulletin Ref. No. A3HM-2016 (G040) [Parts Change Information] December 9, 2016
KYOCERA Document Solutions Inc.
A B C
(Ver.05-P2; 2016/11)
Subject: Revision of the Installation Guide
Model: FAX System 12, PF-7120, DF-7110, Printing System 15 Implementation: From the October 2016 production
The following instructions are added to the Installation Guide for the above enhancement units for common
use of the parts.
[FAX System 12, PF-7120, DF-7110]
• The instructions to install the above units in TASKalfa 8052ci/7052ci or TASKalfa 8002i/7002i are added.
[Printing System 15]
• The instructions to install Printing System 16 in TASKalfa 8052ci/7052ci are added.
N00091898 A3HM_ IPCI No.000201
-
(Page.8/31)
Service Bulletin Ref. No. A3HM-2016 (G040) [Parts Change Information] December 9, 2016
KYOCERA Document Solutions Inc.
A B C
(Ver.04-P1; 2016/9)
Subject: Improving the paper conveying performance
(Change of the shape of MOUNT SENSOR)
Model: TASKalfa 2552ci, TASKalfa 3252ci, TASKalfa 3552ci,
TASKalfa 4052ci, TASKalfa 5052ci, TASKalfa 6052ci,
TASKalfa 4002i, TASKalfa 5002i, TASKalfa 6002i Implementation: From the available timing of the June 2016 production
The rib is applied to MOUNT SENSOR (No.1) for improving the paper conveying performance.
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 302ND06760 2ND06760
302ND06761 2ND06761
MOUNT SENSOR 1 1 O O
N00091342 A3HM_IPCI No.000167
Subject: (For UTAX/TA) Change of the label affixed on the toner kit master carton
(Adding the weight indication)
Model: TASKalfa 2552ci, TASKalfa 3252ci Implementation: From the June 2016 production
The weight indication is added to the labels affixed on the master carton for CK-8511K/Y/M/C and CK-
8512K/Y/M/C.
Note: Toner kits for TASKalfa 3552ci/4052ci/5052ci/6052ci and TASKalfa 4002i/5002i/6002i have used the
new label since the first shipment.
N00091462 A3HM_IPCI No.000172
The rib is applied.
Weight indication is added.
[Master carton]
-
(Page.9/31)
Service Bulletin Ref. No. A3HM-2016 (G040) [Parts Change Information] December 9, 2016
KYOCERA Document Solutions Inc.
A B C
(Ver.04-P3; 2016/9)
Subject: Change of the fuser drive section
Model: TASKalfa 2552ci, TASKalfa 3252ci, TASKalfa 3552ci,
TASKalfa 4052ci, TASKalfa 5052ci, TASKalfa 6052ci,
TASKalfa 4002i, TASKalfa 5002i, TASKalfa 6002i Implementation: From the August 2016 production
The wire fixing parts are changed from "the wire saddle (No.2) and the cable tie (it is a component part of the
old wire (No.1))" to "the band with the snapping shape (it is a component part of the new wire (No.1)) to
prevent the wire pinching at the fuser drive section.
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 302ND46180 32ND46180
302ND46181 2ND46181
CONN.CORD ASSY FUSER MOTOR
1 1 O O
2 7YZM610007++H01
YZ023340 7YZM610007++H01
YZ023340 ACCESS.SADDLE 6 5 - - *1
*1: The above are the q'ty of the wire saddle (No.2) indicated on FIG.33 (Drive Section 3) of Parts List.
N00092690 A3HM_IPCI No.000185
Subject: (For UTAX/TA and OLIVETTI) Registration of the power cord
Model: TASKalfa 2552ci, TASKalfa 3252ci,
TASKalfa 4052ci, TASKalfa 5052ci, TASKalfa 6052ci,
TASKalfa 4002i, TASKalfa 5002i, TASKalfa 6002i Implementation: Service part information only
The power cords for UTAX/TA and OLIVETTI are registered as service parts.
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 ----------- 302ND94830 2ND94830
PARTS AC CORD TA SP - 1 - O UTAX/TA
2 ----------- 302ND94840 2ND94840
PARTS AC CORD LV SP - 1 - O OLIVETTI
N00092423 A3HM_IPCI No.000181
(Before) (After)
Cable tie (Component part of the old wire (No.1))
Wire saddle (No.2)
Band with the snap (component part of the new wire (No.1))
-
(Page.10/31)
Service Bulletin Ref. No. A3HM-2016 (G040) [Parts Change Information] December 9, 2016
KYOCERA Document Solutions Inc.
A B C
(Ver.04-P4; 2016/9)
Subject: Change since the first mass-production
Model: TASKalfa 3552ci, TASKalfa 4052ci, TASKalfa 5052ci, TASKalfa 6052ci
Implementation: Since the first mass-production
The following is changed since the first mass-production.
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 302ND94580 2ND94580
302L794160 2L794160
PARTS FAN COOLING LSU 60 ASSY SP
1 1 X O
Note: The old fan is not yet shipped.
Also, while the old part no. was described on first ver. / Rev.1 of Parts List, Rev.2 describes the new part no.
N00091545 A3HM_IPCI No.000173
Subject: Easy assembly work (Change of COVER TRAY BASE)
Model: TASKalfa 2552ci, TASKalfa 3252ci, TASKalfa 3552ci,
TASKalfa 4052ci, TASKalfa 5052ci, TASKalfa 6052ci,
TASKalfa 4002i, TASKalfa 5002i, TASKalfa 6002i Implementation: After using up the old stock
The shape of COVER TRAY BASE (No.1) is changed for easy assembly work.
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 302ND04671 2ND04671
302ND04672 2ND04672
COVER TRAY BASE 1 1 O O
N00091243 A3HM_IPCI No.000169
(Before) (After)
The shape is changed.
-
(Page.11/31)
Service Bulletin Ref. No. A3HM-2016 (G040) [Parts Change Information] December 9, 2016
KYOCERA Document Solutions Inc.
A B C
(Ver.04-P5; 2016/9)
Subject: Common use of the parts
Model: TASKalfa 3552ci, TASKalfa 2552ci,
TASKalfa 6052ci, TASKalfa 5052ci, TASKalfa 4052ci, TASKalfa 3552ci,
TASKalfa 6002i, TASKalfa 5002i, TASKalfa 4002i
Implementation: TASKalfa 3552ci/2552ci: After using up the old stock Other models: Since the first mass-production
The shapes of the following parts are changed for common use of the parts. (No.1 and No.2 viewed from the machine bottom side)
[New COVER TRAY BASE (No.1)] [New DUCT IH COIL FAN A (No.2)]
[New COVER TRAY TOP (No.3)] [New COVER INNER FRONT UP (No.4)]
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 302ND04670 2ND04670
302ND04671 2ND04671
COVER TRAY BASE 1 1 O O
2 302ND33070 2ND33070
302ND33071 2ND33071
DUCT IH COIL FAN A 1 1 O O
3 302ND04100 2ND04100
302ND04101 2ND04101
COVER TRAY TOP 1 1 O O
4 302ND04030 2ND04030
302ND04031 2ND04031
COVER INNER FRONT UP 1 1 O O
Note: Use the new parts for TASKalfa 6052ci/5052ci/4052ci/3552ci and TASKalfa 6002i/5002i/4002i.
(These models have used the new parts since the first mass-production.)
N00091295 A3HM_IPCI No.000170; N00091480 A3HM_IPCI No.000187; N00091093 A3HM_IPCI No.
The ribs are applied.
The ribs are removed.
The ribs are applied.
The ribs are applied.
The rib is removed.
The hole is added. Accordingly, the neighboring shapes are changed.
-
(Page.12/31)
Service Bulletin Ref. No. A3HM-2016 (G040) [Parts Change Information] December 9, 2016
KYOCERA Document Solutions Inc.
A B C
(Ver.04-P6; 2016/9)
Subject: (For KDCN/KDTW) Change since the first mass-production
Model: DP-7120, DP-7100, DP-7110
Implementation: Since the first mass-production
The following parts are added since the first mass-production.
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 ----------- 303RJ34100 3RJ34100
LABEL FACE UP KS - 1 - O DP-7120 (Label for KDCN)
2 ----------- 303RJ34110 3RJ34110
LABEL CAUTION TW - 1 - O DP-7120 (Label for KDTW)
3 ----------- 303R834150 3R834150
LABEL FACE UP KS - 1 - O DP-7100/DP-7110 (Label for KDCN)
4 ---------- 303R734130 3R734130
LABEL CAUTION TW - 1 - O DP-7100 (Label for KDTW)
5 ---------- 303R834160 3R834160
LABEL CAUTION TW - 1 - O DP-7110 (Label for KDTW)
N00092113/N00092110 A3HM_A3LM_IPCI No.000186
Subject: Change of the component parts of the PF conveying cover assy
Model: PF-7100, PF-7110 Implementation: Since the first shipment of the PF conveying cover assy for service
It is difficult to remove the strap (303PZ0606_) from the PF right cover when replacing the PF conveying
cover assy (No.1, 2). Therefore, the strap is removed from the components parts of the PF conveying cover
assy (No.1, 2). [PF-7100] [PF-7110]
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 303RB94010 3RB94010
303RB94010 3RB94010
PARTS COVER FEED RIGHT ASSY SP
1 1 O O PF-7100
2 303RC94050 3RC94050
303RC94050 3RC94050
PARTS COVER RIGHT FEED ASSY SP
1 1 O O PF-7110
Note: This change have been applied since the first shipment, so the parts numbers remain unchanged.
N00091947/N00092389 A3HM_IPCI No.000182
PF right cover
The strap (303PZ0606_) is removed from the component parts of No.1, 2.
PF right cover
No.1
No.2
-
(Page.13/31)
Service Bulletin Ref. No. A3HM-2016 (G040) [Parts Change Information] December 9, 2016
KYOCERA Document Solutions Inc.
A B C
(Ver.04-P7; 2016/9)
Subject: Revision of the UL leaflet and Installation Guide for FAX System 12
Model: DF-7100, DF-7110, DF-7120, AK-7100, FAX System 12 Implementation: From the June 2016 production
The following documents are revised for common use of them.
1. The product names "TASKalfa 3011i, 3511i" are added to the UL leaflet bundled in the document
finishers and the attachment kit.
2. The way to install for TASKalfa 3011i/3511i is added to Installation Guide of FAX System 12.
[UL leaflet]
[Installation Guide of FAX System 12] (Following is the corresponding part.)
N00091593 A3HM_A3LM_IPCI No.000174
-
(Page.14/31)
Service Bulletin Ref. No. A3HM-2016 (G040) [Parts Change Information] December 9, 2016
KYOCERA Document Solutions Inc.
A B C
(Ver.04-P8; 2016/9)
Subject: (For Metric spec) Common use of the part
Model: DF-7110 Implementation: From the available timing of the June 2016 production
The parallel pin (No.2) is inserted into the DF drum (No.1).
Accordingly, the hole for inserting the parallel pin is added to the DF drum shaft.
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 303RW24100 3RW24100
303RW24101 3RW24101
SHAFT DRUM 1 1 X O
2 7BP512514B0CH01
BP126560 7BP512514B0CH01
BP126560 PARALLEL PIN 2.5X14 3 4 O - The q'ty is changed.
N00091483 A3HM _IPCI No.000165
Subject: Change of GUIDE HOOK
Model: DF-7100 Implementation: After using up the old stock
GUIDE HOOK is changed for easy assembly work.
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 303RD02120 3RD02120
303RD02120 3RD02120
GUIDE HOOK 1 1 O O
Note: The part no. remains unchanged with this change.
N00091852 A3HM_IPCI No.000179
The ribs are removed.
(Before)
[DF drum section]
The parallel pin (No.2) is newly added.
(It is added to the DF drum (X). Refer to the figure right.)
The hole is added to the new DF drum shaft (No.1).
D-cut part (DF front side)
DF drum (X)
Where the parallel pin (No.2) is newly added.
-
(Page.15/31)
Service Bulletin Ref. No. A3HM-2016 (G040) [Parts Change Information] December 9, 2016
KYOCERA Document Solutions Inc.
A B C
(Ver.04-P9; 2016/9)
Subject: (For KDAU) Change of the FAX modular cord
Model: All main units with FAX Implementation: After using up the old stock
The FAX modular cord for Australia is changed for the parts procurement reason (the production of the old cord is discontinued.)
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 3063527482 63527482
303R246010 3R246010
MODULAR CORD AUSTRALIA 1 1 O O
N00091698 A3HM_A3LM_A4BW_A4CL_OTHER_IPCI No.000176
Subject: (For KDTW) Disuse of the Taiwan Energy Mark label
Model: (A) TASKalfa 5551ci, TASKalfa 3551ci, TASKalfa 5501i, TASKalfa 4501i,
(B) TASKalfa 4551ci, TASKalfa 3051ci Implementation: (A) From the June 2016 produciton, (B) From the September 2016 production
The Taiwan Energy Mark label is disused due to the expiration of the Taiwan Energy Mark program
certification.
[Following is TASKalfa 5551ci] (The label is commonly used.)
N00090921(Alp_A)/N00091441/N00091913(K)/N00091439(T)/ N00092730(Alp_C) A3HM_A3LM_IPCI No.000168
Subject: Common use of the part (PLATE NUT M3)
Model: FS-C8650DN, FS-C8600DN Implementation: After using up the old stock
PLATE NUT M3 is changed for common use of the part.
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 302MN04150 2MN04150
302MN04151 2MN04151
PLATE NUT M3 3 3 O O
N00092682 A3HM_IPCI No.000184
Taiwan Energy Mark label
Front cover
-
(Page.16/31)
Service Bulletin Ref. No. A3HM-2016 (G040) [Parts Change Information] December 9, 2016
KYOCERA Document Solutions Inc.
A B C
(Ver.03-P1; 2016/8)
Subject: Changing the damper material of the motor from resin to metal
Model: DP-7120 Implementation: After using up the old stock
The damper material of the motor (not service part) in the DP drive unit is changed from resin to metal for the
part procurement reason (the vendor discontinues to produce the old motor).
(Before) (After)
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 303PH44010 3PH44010
303PH44011 3PH44011
MOTOR DP 1 1 O O
N00089484(J/T)/N00089485(S/M/H) A3LM_A3HM_IPCI No.000154
Damper: Resin Damper: Metal
-
(Page.17/31)
Service Bulletin Ref. No. A3HM-2016 (G040) [Parts Change Information] December 9, 2016
KYOCERA Document Solutions Inc.
A B C
(Ver.02-P1; 2016/6)
Subject: Changes from the first mass-production
Model:
PF-7110, DP-7100,
TASKalfa 2552ci, TASKalfa 3252ci, TASKalfa 3552ci, TASKalfa 4052ci,
TASKalfa 5052ci, TASKalfa 6052ci, TASKalfa 4002i, TASKalfa 5002i,
TASKalfa 6002i Implementation: From the first mass-production
The following parts are changed or added from the first mass-production.
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 302ND04420 2ND04420
302ND04421 2ND04421
SPRING ACTUATOR 1 1 X O
2 302ND09020 2ND09020
302ND09021 2ND09021
CASSETTE BASE 2ND 1 1 X O
3 303R724050 3R724050
303R724051 3R724051
GUIDE REGIST 1 1 X O
4 303R731070 3R731070
303R731071 3R731071
GEAR Z69R Z21L 2 2 X O
5 302ND29020 2ND29020
302ND29021 2ND29021
GUIDE DU RIGHT 1 1 X O
6 ----------- 302ND94700 2ND94700
PARTS PULLEY SET SP - 1 - O *1
*1: No.6 is the kit containing the following 3 parts.
• PARTS ROLLER RETARD ASSY SP(302ND9435_),
• PULLEY FEED(302N40603_)
• PULLEY PICKUP(302ND0611_)
A3HM_IPCI No.000138
Subject: Improving the margin for the detection ability of the registration switch
(Disusing the cushion)
Model: DP-7100 Implementation: From the available timing of May 2016 production
The cushion (No.1) is disused to improve the margin for the detection ability of the registration switch.
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 303P202020 3P202020
----------- CUSHION COVER FRONT 1 - O - *1
*1: This part was described on the draft version Parts List issued on April 2016, though the formal first version on May
2016 does not contain this parts.
N00091207 A3HM_IPCI No.000139
-
(Page.18/31)
Service Bulletin Ref. No. A3HM-2016 (G040) [Parts Change Information] December 9, 2016
KYOCERA Document Solutions Inc.
A B C
(Ver.02-P2; 2016/6)
Subject: Common use of the part (HOUSING CIS)
Model: DP-772, TASKalfa 7551ci, TASKalfa 6551ci, TASKalfa 8001i, TASKalfa 6501i Implementation: After using up the old stock
HOUSING CIS (No.1) is changed for common use of the part.
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 303NW24011 3NW24011
303NW24012 3NW24012
HOUSING CIS 1 1 O O
Note: Use the new part for DP-7110.
N00089414 A3HM_IPCI No.000152
Subject: Common use of the part (COVER INNER)
Model: TASKalfa 8001i, TASKalfa 6501i, TASKalfa 8000i, TASKalfa 6500i Implementation: After using up the old stock
COVER INNER (No.1) is changed for common use of the part.
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 302LF03042 2LF03042
302LF03043 2LF03043
COVER INNER 1 1 O O
Note: Use the new part for the next development models.
N00089834 A3HM_IPCI No.000155
6mm -> 8mm
HOUSING CIS (No.1)
(Before) (After)
The shapes are changed.
-
(Page.19/31)
Service Bulletin Ref. No. A3HM-2016 (G040) [Parts Change Information] December 9, 2016
KYOCERA Document Solutions Inc.
A B C
The shapes are removed.
The shapes are added.
(Ver.02-P3; 2016/6)
Subject: Common use of the part (Changing the IH unit)
Model: TASKalfa 8001i, TASKalfa 6501i Implementation: After using up the old stock
The motor case in the IH unit (No.1-4) is changed for common use of the part.
(Before) (After)
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 302N793070 2N793070
302N793071 2N793071
FK-6708IH 1 1 O O 120V
2 302N793080 2N793080
302N793081 2N793081
FK-6709IH 1 1 O O 220-240V (Except KDCN/KDKR)
3 302N79C080 2N79C080
302N79C081 2N79C081
FK-6709IH(CN) 1 1 O O KDCN
4 302N79K081 2N79K081
302N79K082 2N79K082
FK-6709IH(KR) 1 1 O O KDKR
Note: Use the new part for the next development models.
N00090313 A3HM_IPCI No.000156
Subject: Changing the motor
Model:
TASKalfa 7551ci, TASKalfa 6551ci, TASKalfa 7550ci, TASKalfa 6500ci, TASKalfa 5551ci, TASKalfa 4551ci, TASKalfa 3551ci, TASKalfa 3051ci, TASKalfa 5550ci, TASKalfa 4550ci, TASKalfa 3550ci, TASKalfa 3050ci, FS-C8650DN, FS-C8600DN, TASKalfa 8001i, TASKalfa 6501i, TASKalfa 8000i, TASKalfa 6500i, TASKalfa 5501i, TASKalfa 4501i, TASKalfa 3501i, TASKalfa 5500i, TASKalfa 4500i, TASKalfa 3500i
Implementation: After using up the old stock
The motors are changed to stabilize the EMI level.
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 302LC94462 2LC94462
302LC94463 2LC94463
PARTS MOTOR-BL W20 DRUM Z11 SP
1 1 O O *1
2 302K994892 2K994892
302K994893 2K994893
PARTS MOTOR-BL W30 DLP SP 1 1 O O *2
*1 : TASKalfa 7551ci/6551ci, TASKalfa 7550ci/6500ci, TASKalfa 5551ci/4551ci/3551ci/3051ci,
TASKalfa 5550ci/4550ci/3550ci/3050ci, FS-C8650DN, FS-C8600DN, TASKalfa 8001i/6501i,
TASKalfa 8000i/6500i, TASKalfa 5501i/4501i/3501i, TASKalfa 5500i/4500i/3500i
*2 : TASKalfa 7551ci/6551ci, TASKalfa 7550ci/6550ci, TASKalfa 8001i/6501i, TASKalfa 8000i/6500i
N00087513/ N00087514/ N00087515 A3HM _A3LM_IPCI No.000161
-
(Page.20/31)
Service Bulletin Ref. No. A3HM-2016 (G040) [Parts Change Information] December 9, 2016
KYOCERA Document Solutions Inc.
A B C
(Ver.02-P4; 2016/6)
Subject: Common use of the part (FRAME FRONT FUSER B)
Model: TASKalfa 7551ci, TASKalfa 6551ci, TASKalfa 7550ci, TASKalfa 6550ci,
TASKalfa 8001i, TASKalfa 6501i, TASKalfa 8000i, TASKalfa 6000i Implementation: After using up the old stock
FRAME FRONT FUSER B (No.1) is changed for common use of the part.
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 302K902163 2K902163
302K902164 2K902164
FRAME FRONT FUSER B 1 1 O O
Note: Use the new part for the next development models.
N00091056 A3HM_IPCI No.000162
Subject: Common use of the part (MOUNT CLEANER REGIST)
Model:
TASKalfa 8001i, TASKalfa 6501i,
TASKalfa 5501i, TASKalfa 4501i, TASKalfa 3501i,
TASKalfa 8000i, TASKalfa 6500i,
TASKalfa 5500i, TASKalfa 4500i, TASKalfa 3500i Implementation: After using up the old stock
MOUNT CLEANER REGIST (No.1) is changed for common use of the part.
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 302LF24140 2LF24140
302LF24141 2LF24141
MOUNT CLEANER REGIST 1 1 O O
Note: Use the new part for the next development models.
N00089133 A3HM_IPCI No.000146
(Before) (After)
X Dimension is defined so that it does not contact the neighboring part in the next development models.
[View from X]
-
(Page.21/31)
Service Bulletin Ref. No. A3HM-2016 (G040) [Parts Change Information] December 9, 2016
KYOCERA Document Solutions Inc.
A B C
(Ver.02-P5; 2016/6)
Subject: Common use of the part (FRAME MIDDLE FEED)
Model:
TASKalfa 7551ci, TASKalfa 6551ci, TASKalfa 8001i, TASKalfa 6501i,
TASKalfa 5551ci, TASKalfa 4551ci, TASKalfa 3551ci, TASKalfa 3051ci,
TASKalfa 5501i, TASKalfa 4501i, TASKalfa 3501i,
TASKalfa 7550ci, TASKalfa 6550ci, TASKalfa 8000i, TASKalfa 6500i,
TASKalfa 5550ci, TASKalfa 4550ci, TASKalfa 3550ci, TASKalfa 3050ci,
TASKalfa 5500i, TASKalfa 4500i, TASKalfa 3500i, FS-C8650DN, FS-C8600DN Implementation: After using up the old stock
The shape of FRAME MIDDLE FEED (No.1) is changed for common use of the part.
(Before) (After)
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 302K924530 2K924530
302K924531 2K924531
FRAME MIDDLE FEED 1 1 O O
Note: Use the new part for the next development models.
N00089132 A3HM_IPCI No.000145
Subject: Changing the HDD fixing pins
Model:
TASKalfa 7551ci, TASKalfa 6501i, TASKalfa 8001i, TASKalfa 6501i,
TASKalfa 5551ci, TASKalfa 4551ci, TASKalfa 3551ci, TASKalfa 3051ci,
TASKalfa 5501i, TASKalfa 4501i, TASKalfa 3501i,
TASKalfa 7550ci, TASKalfa 6550ci, TASKalfa 8000i, TASKalfa 6500i,
TASKalfa 5550ci, TASKalfa 4550ci, TASKalfa 3550ci, TASKalfa 3050ci,
TASKalfa 5500i, TASKalfa 4500i, TASKalfa 3500i, FS-C8650DN, FS-C8600DN Implementation: After using up the old stock
The HDD fixing pins (No.1) are changed to improve the margin to secure the HDD.
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 302MV39340 2MV39340
302MV39341 2MV39341
PIN HDD 4 4 O O
N00087742 A3HM_A3LM_IPCI No.000093
(Ver.02-P6; 2016/6)
(Before) 9.3±0.3mm -> (After) 8.3±0.3mm
(Before) 3.8±0.2mm -> (After) 2.8±0.3mm
The shape is changed.
-
(Page.22/31)
Service Bulletin Ref. No. A3HM-2016 (G040) [Parts Change Information] December 9, 2016
KYOCERA Document Solutions Inc.
A B C
Subject: Common use of the parts (Changing the motors)
Model:
PF-740/PF-740(B), PF-730/PF-730(B), PF-780/PF-780(B), PF-770, BF-730,
TASKalfa 7551ci, TASKalfa 6551ci, TASKalfa 8001i, TASKalfa 6501i,
TASKalfa 5551ci, TASKalfa 4551ci, TASKalfa 3551ci, TASKalfa 3051ci,
TASKalfa 5501i, TASKalfa 4501i, TASKalfa 3501i,
TASKalfa 7550ci, TASKalfa 6550ci, TASKalfa 8000i, TASKalfa 6500i,
TASKalfa 5550ci, TASKalfa 4550ci, TASKalfa 3550ci, TASKalfa 3050ci,
TASKalfa 5500i, TASKalfa 4500i, TASKalfa 3500i, FS-C8650DN, FS-C8600DN Implementation: After using up the old stock
The motors are changed for common use of the parts.
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 302LC94291 2LC94291
302LC94292 2LC94292
PARTS MOTOR-BL W10 SP 1 1 O O *1
2 302LC94282 2LC94282
302LC94283 302LC94283
PARTS MOTOR-BL W40 SP 1 1 O O *2
3 302K994332 2K994332
302K994333 2K994333
PARTS MOTOR-BL W30 SP * * O O *3
4 302K944151 2K944151
----------- MOTOR-BL W30 1 1 O O Change to No.3 PF-780/PF-780(B)
Note: Use the new parts in TASKalfa 3511i and TASKalfa 3011i.
*The quantities differ depending on the models.
*1: TASKalfa 8001i/6501i, TASKalfa 3551ci/3051ci, TASKalfa 5501i/4501i/3501i, TASKalfa 8000i/6500i, TASKalfa 3550ci/3050ci,TASKalfa 5500i/4500i/3500i *2: BF-730, TASKalfa 5551ci/4551ci, TASKalfa 5550ci/4550ci/3550ci/3050ci, FS-C8650DN/C8600DN *3: PF-740/PF-740(B), PF-730/PF-730(B), PF-780/PF-780(B), PF-770, TASKalfa 7551ci/6551ci, TASKalfa 8001i/6501i, TASKalfa 5551ci/4551ci/3551ci/3051ci, TASKalfa 5501i/4501i, TASKalfa 7550ci/6550ci, TASKalfa 8000i/6500i, TASKalfa 5550ci/4550ci, TASKalfa 5500i/4500i,
FS-C8650DN/C8600DN
N00087510(No1) / N00087512(No2) /N00087511(No3) A3HM_ A3LM_ A4CL_ IPCI No.000147
Subject: Common use of the part (COVER INNER UPPER)
Model: DF-790/DF-790(B)/DF-790(C) Implementation: After using up the old stock
COVER INNER UPPER (No.1) is changed for common use of the part.
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 303NB04064 3NB04064
303NB04065 3NB04065
COVER INNER UPPER 1 1 O O
Note: Use the new part for the next development models.
N00089470 A3HM_A3LM_IPCI No.000153
(Ver.02-P7; 2016/6)
(Outside) (Inside)
2 ribs are applied.
2 ribs are applied.
4 ribs are applied.
-
(Page.23/31)
Service Bulletin Ref. No. A3HM-2016 (G040) [Parts Change Information] December 9, 2016
KYOCERA Document Solutions Inc.
A B C
Subject: Common use of the part (Changing the shape)
Model: DF-790/DF-790(B)/DF-790(C), DF-770/DF-770(B)/DF-770(C)/DF-770(D) Implementation: After using up the old stock
The shape of HANDLE GUIDE FEED LOWER (No.1) is changed for common use of the part.
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 303NB07091 3NB07091
303NB07092 3NB07092
HANDLE GUIDE FEED LOWER 1 1 O O
Note: Use the new part for the next development models.
N00089007 A3HM_A3LM_IPCI No.000144
Subject: Common use of the part (BRACKET:BRKT-CAM-TR2-F)
Model: TASKalfa 750c, TASKalfa 650c, TASKalfa 550c Implementation: After using up the old stock
The tapping is added to each screw hole of the bracket (No.1) for common use of the part.
The part No. remains unchanged with this change.
FIG. 44 FRONT-FRAME-ASM
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 305JN71HV0 5JN71HV0
305JN71HV0 5JN71HV0
BRACKET:BRKT-CAM-TR2-F 1 1 O O
Note: The part No. remains unchanged.
N00090618 A3HM_IPCI No.000160
(Before) (After)
The shape is changed.
The tapping is added to each screw hole. (The tapping screws continue to be used as before.)
BRACKET:BRKT-CAM-TR2-F (No.1)
-
(Page.24/31)
Service Bulletin Ref. No. A3HM-2016 (G040) [Parts Change Information] December 9, 2016
KYOCERA Document Solutions Inc.
A B C
(Ver.02-P8; 2016/6)
Subject: Changing the operation PWB
Model: TASKalfa 550c, TASKalfa 650c, TASKalfa 750c Implementation: After using up the old stock
The following parts are changed for the LED procurement reason at vendor (the production of the old LED is
discontinued).
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 305JN72AA0 5JN72AA0
305JN72AA1 5JN72AA1
PWB ASSY:PWA-F-KEY1-430 1 1 O O
2 305JN72AB0 5JN72AB0
305JN72AB1 5JN72AB1
PWB ASSY:PWA-F-KEY2-430 1 1 O O
N00089601/N00090027(BSI_G15J996) A3HM_IPCI No.000142
Subject: Part Number Information
Model: TASKalfa 550c, TASKalfa 650c, TASKalfa 750c Implementation: This is to inform the part No. of service parts.
The following parts are registered as service parts.
FIG. 48 LSU-ASM
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 ----------- 305JN72VA0 5JN72VA0
LSU:ASYB-SHUTTER-DRV - 1 - O
2 ----------- 305JN72NF0 5JN72NF0
SCREW:S/TPP/FHEXM-3X10-NI - 2 - O
N00090035 BSI.G16A114 A3HM_IPCI No.000151
No.1
No.2
-
(Page.25/31)
Service Bulletin Ref. No. A3HM-2016 (G040) [Parts Change Information] December 9, 2016
KYOCERA Document Solutions Inc.
A B C
(Ver.02-P9; 2016/6)
Subject: Easy parts procurement
Model: All models Implementation: After using up the old stock
The following parts are changed for easy parts procurement.
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 ----------- 7NXGP1A173LCH01
NX115300 SENSOR OPT. - * - O
2 303BN27061 3BN27061
----------- SWITCH,EJECT * - O - Changed to No.1
3 5FNXGP1A73A++02
2DC27180 -----------
PT.SENSOR GP1A73AJ00/BK
* - O - Changed to No.1
4 M2105890 7YZM390007++H01
YZ151750 ACCESS.CLAMP * * O O
5 M2105970 7YZM390001++H01
YZ151740 ACCESS.CLAMP * * O O
* All quantity used in all area is changed.
(1~3)N00089588/(4)N00089777/(5)N00089778 A3HM_A3LM_ A4BW_ A4CL_OTHR_IPCI No.000159
-
(Page.26/31)
Service Bulletin Ref. No. A3HM-2016 (G040) [Parts Change Information] December 9, 2016
KYOCERA Document Solutions Inc.
A B C
The hooks are removed.
The hook shape is changed.
The engraving is added.
The hole shape is changed.
The hole shape is changed.
The hook shape is changed.
The hole is removed.
The hole is removed.
The engraving is removed.
(Ver.01-P1; 2016/04)
Subject: Common use of the parts (GUIDE FFC BRIDGE)
Model: TASKalfa 7551ci, TASKalfa 6551ci, TASKalfa 7550ci, TASKalfa 6550ci,
TASKalfa 5551ci, TASKalfa 4551ci, TASKalfa 3551c, TASKalfa 3051ci,
TASKalfa 5550ci, TASKalfa 4550ci, TASKalfa 3550ci, TASKalfa 3050ci Implementation: After using up the old stock
The shape of GUIDE FFC BRIDGE (No.1) is changed for common use of the parts.
(Before) (After)
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 302K939601 2K939601
302K939602 2K939602
GUIDE FFC BRIDGE 1 1 O O
Note: Use the new part in the next development models.
N00087467 A3HM_IPCI No.000112
Subject: Changing the material of the guides
Model:
TASKalfa 7550ci, TASKalfa 6550ci, TASKalfa 8000i, TASKalfa 6500i,
TASKalfa 5550ci, TASKalfa 4550ci, TASKalfa 3550ci, TASKalfa 3050ci,
TASKalfa 5500i, TASKalfa 4500i, TASKalfa 3500i,
FS-C8650DN, FS-C8600DN Implementation: After using up the old stock
The guides (No.1, 2) are changed as below to strengthen them.
1. Changing the material (No.1, 2): (Before) >ABS-FR(40)PC+ABS-FR(40)<
2. Expanding the inner diameter of the screw hole (No.2 only):
(Before) Ф2.45±0.03mm (After) Ф2.48±0.03mm
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 302K939141 2K939141
302K939142 2K939142
GUIDE FFC FEED 1 1 1 O O
2 302K939170 2K939170
302K939171 2K939171
GUIDE FFC FEED 2 1 1 O O
N00087158/N00087161 A3HM_IPCI No.000097
-
(Page.27/31)
Service Bulletin Ref. No. A3HM-2016 (G040) [Parts Change Information] December 9, 2016
KYOCERA Document Solutions Inc.
A B C
(Ver.01-P2; 2016/04)
Subject: Changing the damper inside the motor (Resin to Metal)
Model:
DP-772, DP-771,
TASKalfa 7551ci, TASKalfa 6551ci, TASKalfa 8001i, TASKalfa 6501i,
TASKalfa 7550ci, TASKalfa 6550ci, TASKalfa 8000i, TASKalfa 6500i,
TASKalfa 5551ci, TASKalfa 4551ci, TASKalfa 5501i, TASKalfa 4501i,
TASKalfa 5550ci, TASKalfa 4550ci, TASKalfa 5500i, TASKalfa 4500i,
FS-C8650DN, FS-C8600DN Implementation: After using up the old stock
The material of the damper inside the motor is changed from resin to metal for the part procurement reason
in the vendor (The production of the old damper is discontinued.)
(Before) (After)
No. Old Part
No. New Part
No. Description
Q’ ty Com
bi pati lity Remarks
Old New Old New
1 302N494072 2N494072
302N494073 2N494073
PARTS GUIDE FEED REGIST ASSY SP
1 1 O O
TASKalfa 5551ci/4551ci
TASKalfa 5550ci/4550ci
FS-C8650DN/C8600DN
2 302N994021 2N994021
302N994022 2N994022
PARTS GUIDE FEED REGIST ASSY SP
1 1 O O TASKalfa 5501i/4501i
TASKalfa 5500i/4500i
3 302K994310 2K994310
302K994311 2K994311
+ PARTS MOTOR HB MID SP 1 1 O O (Individual motor)
Component parts of No.1 ,2
4 302K994954 2K994954
302K994955 2K994955
PARTS GUIDE FEED REGIST ASSY SP
1 1 O O TASKalfa 7551ci/6551ci
TASKalfa 7550ci/6550ci
5 302LF94114 2LF94114
302LF94115 2LF94115
PARTS GUIDE FEED REGIST ASSY SP
1 1 O O TASKalfa 8001i/6501i
TASKalfa 8000i/6500i
6 302K994A80 2K994A80
302K994A81 2K994A81
+ PARTS MOTOR HB MID SP 1 1 O O (Individual motor)
Component parts of No.4, 5
7 303M494040 3M494040
303M494041 3M494041
PARTS MOTOR CONVEYING SP
2 2 O O
(Individual motor)
DP-772, DP-771
TASKalfa 7551ci/6551ci
TASKalfa 7550ci/6550ci
TASKalfa 8001i/6501i
TASKalfa 8000i/6500i
8 303M494210 3M494210
303M494211 3M494211
PARTS MOTOR-GEAR SET SP
1 1 O O TASKalfa 7550ci/6550ci
TASKalfa 8000i/6500i
9 303NW94070 3NW94070
303NW94071 3NW94071
PARTS MOTOR-GEAR SET SP
1 1 O O DP-771
10 303M494181 3M494181
303M494182 3M494182
+ PARTS MOTOR REGISTRATION SP
1 1 O O
(Individual motor)
-Component parts of No.8, 9
-DP-772, DP-771
"+" mark at the beginning of the part name means it is a component part.
N00088633/N00088634/N00088636/N00088637 A3HM_IPCI No.000100
Metal damper Resin damper
-
(Page.28/31)
Service Bulletin Ref. No. A3HM-2016 (G040) [Parts Change Information] December 9, 2016
KYOCERA Document Solutions Inc.
A B C
(Ver.01-P3; 2016/4)
Subject: Changing the packing of the primary paper feed unit for service
Model:
PF-730/PF-730(B), PF-780/PF-780(B),
TASKalfa 7551ci, TASKalfa 6551ci, TASKalfa 8001i, TASKalfa 6501i,
TASKalfa 5551ci, TASKalfa 4551ci, TASKalfa 3551ci, TASKalfa 3051ci,
TASKalfa 5501i, TASKalfa 4501i, TASKalfa 3501i,
TASKalfa 7550ci, TASKalfa 6550ci, TASKalfa 8000i, TASKalfa 6500i,
TASKalfa 5550ci, TASKalfa 4550ci, TASKalfa 3550ci, TASKalfa 3050ci,
TASKalfa 5500i, TASKalfa 4500i, TASKalfa 3500i Implementation: This affects the service parts only. (Since March 2016 production)
The packing materials of the primary paper feed unit for service is changed to improve the shock resistance
during transit. The part numbers of the service parts remain unchanged with this change.
(Before)
(After)
N00089792/N00089960 A3HM_IPCI No.000115
No. Part No. Part Name Affected Model
1 302N49402_ PARTS PRIMARY FEED UNIT HI SP
(1st and 2nd cassettes)
TASKalfa 7551ci/6551ci, TASKalfa 8001i/6501i
TASKalfa 7550ci/6550ci, TASKalfa 8000i/6500i
TASKalfa 5551ci/4551ci, TASKalfa 5501i/4501i
TASKalfa 5550ci/4550ci, TASKalfa 5500i4500i
2 303NJ9411_ PARTS PRIMARY FEED UNIT HI D SP
PF-730 /PF-730(B) (2 sets of the 500-sheet paper feeder),
PF-780 /PF-780(B) (500-sheet paper feeder)
TASKalfa 3551ci/3051ci, TASKalfa 3501i (1st and 2nd cassettes)
TASKalfa 3550ci/3050ci, TASKalfa 3500i (1st and 2nd cassettes)
The unit is put on the bottom plate composed of the cushioning material and the cardboard.
The unit is wrapped with the cushioning sheets.
The wrapped unit is put in the packing carton.
[Affected unit]
Step-1 Step-2
Step-1 Step-2 Step-3
The wrapped unit is put in the packing carton.
The unit is wrapped with the cushioning sheets.
-
(Page.29/31)
Service Bulletin Ref. No. A3HM-2016 (G040) [Parts Change Information] December 9, 2016
KYOCERA Document Solutions Inc.
A B C
(Ver.01-P4; 2016/04)
Subject: (For KDAU) Changing the Australian line standard certification label
Model: FAX SYSTEM(W) Implementation: Since February 2016 production
The design of the Australian line standard certification label is changed.
Accordingly, the figure of the license label is changed to the new one in the FAX Installatioin Guide.
(Before) (After)
N00088374 A3HM_A3LM_IPCI No.000106
-
(Page.30/31)
Service Bulletin Ref. No. A3HM-2016 (G040) [Parts Change Information] December 9, 2016
KYOCERA Document Solutions Inc.
A B C
[Affected Model list]
Item Affected Model
DP-7100
DP-7110
TASKalfa 3511i/3011i, TASKalfa 3252ci/2552ci, TASKalfa 6052ci/5052ci/4052ci/3552ci,
TASKalfa 6002i/5002i/4002i
DP-7120 TASKalfa 3511i/3011i, TASKalfa 3252ci/2552ci
DP-770/DP-770(B)
TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 5500i/4500i/3500i,
TASKalfa 5551ci/4551ci/3551ci/3051ci, TASKalfa 5501i/4501i/3501i,
TASKalfa 2551ci, TASKalfa 3510i, TASKalfa 3010i
DP-771 TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 5500i/4500i/3500i
DP-772 TASKalfa 5551ci/4551ci/3551ci/3051ci, TASKalfa 5501i/4501i/3501i, TASKalfa 2551ci,
TASKalfa 3510i, TASKalfa 3010i
DT-730 TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 5500i/4500i/3500i
DT-730(B) TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 5500i/4500i/3500i,
TASKalfa 2551ci, TASKalfa 3510i/3010i
PF-7100
PF-7110 TASKalfa 3252ci/2552ci, TASKalfa 6052ci/5052ci/4052ci/3552ci, TASKalfa 6002i/5002i/4002i
PF-7120 TASKalfa 3252ci/2552ci, TASKalfa 6052ci/5052ci/4052ci/3552ci, TASKalfa 6002i/5002i/4002i,
TASKalfa 8052ci/7052ci, TASKalfa 8002i/7002i
PF-7130 TASKalfa 8052ci/7052ci, TASKalfa 8002i/7002i
PF-730/PF-730(B)
PF-740/PF-740(B)
TASKalfa 7550ci/6550ci, TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 8000i/6500i,
TASKalfa 5500i/4500i/3500i, FS-C8650DN, FS-C8600DN,
TASKalfa 7551ci/6551ci, TASKalfa 5551ci/4551ci/3551ci/3051ci, TASKalfa 8001i/6501i,
TASKalfa 5501i/4501i/3501i, TASKalfa 8052ci/7052ci, TASKalfa 8002i/7002i
PF-770 TASKalfa 7550ci/6550ci, TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 8000i/6500i,
TASKalfa 5500i/4500i/3500i, FS-C8650DN, FS-C8600DN
PF-780/PF-780(B) TASKalfa 7550ci/6550ci, TASKalfa 5550ci/4550ci, TASKalfa 8000i/6500i, FS-C8650DN,
FS-C8600DN, TASKalfa 7551ci/6551ci, TASKalfa 5551ci/4551ci, TASKalfa 8001i/6501i
DF-7100 TASKalfa 3252ci/2552ci, TASKalfa 6052ci/5052ci/4052ci/3552ci, TASKalfa 6002i/5002i/4002i
DF-7110 TASKalfa 3252ci/2552ci, TASKalfa 6052ci/5052ci/4052ci/3552ci, TASKalfa 6002i/5002i/4002i,
TASKalfa 8052ci/7052ci, TASKalfa 8002i/7002i
DF-7120 TASKalfa 3252ci/2552ci, TASKalfa 6052ci/5052ci/4052ci/3552ci, TASKalfa 6002i/5002i/4002i,
TASKalfa 3511i/3011i
DF-770 TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 5500i/4500i/3500i
DF-770(B)/DF-770(C) TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 5500i/4500i/3500i, FS-C8650DN, FS-C8600DN,
TASKalfa 5551ci/4551ci/3551ci/3051ci, TASKalfa 5501i/4501i/3501i
DF-770(D)
TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 5500i/4500i/3500i, FS-C8650DN, FS-C8600DN,
TASKalfa 5551ci/4551ci/3551ci/3051ci, TASKalfa 5501i/4501i/3501i,
TASKalfa 2551ci, TASKalfa 3510i, TASKalfa 3010i
DF-790 TASKalfa 7550ci/6550ci, TASKalfa 5550ci/4550ci/3550ci/3050ci,
TASKalfa 8000i/6500i, TASKalfa 5500i/4500i/3500i
DF-790(B)/DF-790(C)
TASKalfa 7550ci/6550ci, TASKalfa 5550ci/4550ci/3550ci/3050ci,
TASKalfa 8000i/6500i, TASKalfa 5500i/4500i/3500i, FS-C8650DN, FS-C8600DN,
TASKalfa 5551ci/4551ci/3551ci/3051ci, TASKalfa 5501i/4501i/3501i, TASKalfa 7551ci/6551ci,
TASKalfa 8001i/6501i
AK-7100
DF-7110/DF-7120 (Main unit: TASKalfa 3252ci/2552ci, TASKalfa 6052ci/5052ci/4052ci/3552ci,
TASKalfa 6002i/5002i/4002i, TASKalfa 8052ci/7052ci,
TASKalfa 8002i/7002i)
AK-730 DF-770/DF-770(B)/DF-770(C)/DF-770(D), DF-790/DF-790(B)/DF-790(C)
(Main unit: TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 5500i/4500i/3500i)
AK-735 DF-770(B)/DF-770(C)/DF-770(D), DF-790(B)/DF-790(C) (Main unit: FS-C8650DN, FS-C8600DN)
AK-731 DF-770(C)/DF-770(D), DF-790(C)
(Main unit: TASKalfa 5551ci/4551ci/3551ci/3051ci, TASKalfa 5501i/4501i/3501i)
AK-736 MT-730(B) (Main unit: FS-C8650DN, FS-C8600DN, TASKalfa 8052ci/7052ci,
TASKalfa 8002i/7002i)
-
(Page.31/31)
Service Bulletin Ref. No. A3HM-2016 (G040) [Parts Change Information] December 9, 2016
KYOCERA Document Solutions Inc.
A B C
Item Affected Model
BF-730
DF-790/DF-790(B)/DF-790(C)
(Main unit: TASKalfa 7550ci/6550ci, TASKalfa 5550ci/4550ci/3550ci/3050ci,
TASKalfa 8000i/6500i, TASKalfa 5500i/4500i/3500i, FS-C8650DN, FS-C8600DN)
DF-7110 (Main unit: TASKalfa 3252ci/2552ci, TASKalfa 6052ci/5052ci/4052ci/3552ci,
TASKalfa 6002i/5002i/4002i, TASKalfa 8052ci/7052ci, TASKalfa 8002i/7002i)
MT-730
DF-790/DF-790(B)
(Main unit: TASKalfa 7550ci/6550ci, TASKalfa 5550ci/4550ci/3550ci/3050ci,
TASKalfa 8000i/6500i, TASKalfa 5500i/4500i/3500i)
MT-730(B)
DF-790/DF-790(B)/DF-790(C)
(Main unit: TASKalfa 7550ci/6550ci, TASKalfa 5550ci/4550ci/3550ci/3050ci,
TASKalfa 8000i/6500i, TASKalfa 5500i/4500i/3500i, FS-C8650DN, FS-C8600DN)
DF-791 (Main unit: TASKalfa 3510i/3010i, TASKalfa 3511i/3011i)
DF-7110 (Main unit: TASKalfa 3252ci/2552ci, TASKalfa 6052ci/5052ci/4052ci/3552ci,
TASKalfa 6002i/5002i/4002i, TASKalfa 8052ci/7052ci, TASKalfa 8002i/7002i)
PH-7100/7120/7130 DF-7100 (Main unit: TASKalfa 3252ci/2552ci, TASKalfa 6052ci/5052ci/4052ci/3552ci,
TASKalfa 6002i/5002i/4002i)
PH-7A/7C/7D
DF-770/DF-770(B)/DF-770(C)/DF-770(D)
(Main unit: TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 5500i/4500i/3500i, FS-C8650DN,
FS-C8600DN, TASKalfa 5551ci/4551ci/3551ci/3051ci, TASKalfa 5501i/4501i/3501i,
TASKalfa 2551ci, TASKalfa 3510i, TASKalfa 3010i)
DF-790/DF-790(B)/DF-790(C)
(Main unit: TASKalfa 7550ci/6550ci, TASKalfa 5550ci/4550ci/3550ci/3050ci,
TASKalfa 8000i/6500i, TASKalfa 5500i/4500i/3500i, FS-C8650DN, FS-C8600DN,
TASKalfa 5551ci/4551ci/3551ci/3051ci, TASKalfa 5501i/4501i/3501i,
TASKalfa 7551ci/6551ci, TASKalfa 8001i/6501i)
DF-791 (Main unit: TASKalfa 3510i/3010i, TASKalfa 3511i/3011i)
DF-7110
(Main unit: TASKalfa 3252ci/2552ci, TASKalfa 6052ci/5052ci/4052ci/3552ci,
TASKalfa 6002i/5002i/4002i, TASKalfa 8052ci/7052ci, TASKalfa 8002i/7002i)
DF-7120
(Main unit: TASKalfa 3252ci/2552ci, TASKalfa 6052ci/5052ci/4052ci/3552ci,
TASKalfa 6002i/5002i/4002i)
JS-730/JS-731/
JS-732 TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 5500i/4500i/3500i
FAX System 12 TASKalfa 3511i/3011i, TASKalfa 3252ci/2552ci, TASKalfa 6052ci/5052ci/4052ci/3552ci,
TASKalfa 6002i/5002i/4002i, TASKalfa 8052ci/7052ci, TASKalfa 8002i/7002i
FAX System(V) TASKalfa 7550ci/6550ci, TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 8000i/6500i,
TASKalfa 5500i/4500i/3500i
FAX System(W) TASKalfa 2550ci, TASKalfa 5551ci/4551ci/3551ci/3051ci, TASKalfa 5501i/4501i/3501i
TASKalfa 2551ci, TASKalfa 3510i/3010i
Printing System 15 TASKalfa 3252ci/2552ci, TASKalfa 6052ci/5052ci/4052ci/3552ci,
TASKalfa 6002i/5002i/4002i
Printing System 16 TASKalfa 8052ci/7052ci